mohit_resume_16_12_2016
TRANSCRIPT
MOHIT GARG
Address: I-floor, D-45, Sector – 39, Mobile : +91-8745981675Noida, (UP) -201301 Email: [email protected]
CAREER OBJECTIVE
Looking for a challenging career which demands the best of my professional ability in terms of technical and analytical skills and helps me in broadening and enhancing my current skill and knowledge.
SYNOPSIS
Currently working as Software Developer in Aricent Technologies. B.Tech Degree in Electronics and Communication Engineering from Uttar Pradesh Technical
University, Lucknow. Possess a very good knowledge of Embedded systems and Robotics, Electronic circuits design and
C language. General Secretary of Embedded Systems & Robotics club of ABES Engineering College. Sponsorship Manager of Genero’14 (Techno-cultural fest of ABES Engineering College).
PROFILE
Trainer of Embedded systems & Robotics. Well versed in C language. Good knowledge of electronic circuits. Analytical, good at problem solving and excellent in maintaining interpersonal relationship. Quick learner.
SOFTWARE SKILLS
Languages C, C# ( Basic ), C++, Java (Basic).Operating Systems Windows XP,7, 8 and Linux.Softwares Altium Designer , Proteus, Multisim Suite, Scilab
Git, MS Office, Arduino IDE, Design Spark PCB and other Embedded IDE,
HARDWARE SKILLS
Good knowledge of Electronics. Microcontrollers- Compatible to work on any controller. Interfacing devices- Writing library files for different devices (sensors, display devices, communication
devices). PCB Design
PROJECTS UNDERTAKEN
1. OMNIOmni was a camera based project. It consists of 6 GoPro Hero 4 cameras arranged together to make a cube. One camera is the primary camera while others are secondary camera. The primary camera is the controller of everything. FPGA is being used as the medium of communication between cameras with I2C being the protocol. The omni is capable of encoding photos, videos, burst photos, timelapse videos, timelapse photos and nightlapse photos with various configurations. All these can be stiched together to make a 6 directional encoded file along with the sensor fusion data which was driven by an MCU over SPI interface and MCU by I2C protocol.
Role: Developing I2C and SPI drivers for MCU, Framework development of primary camera to over I2C driver of camera, Sensor data fusion development.
Status: Product Launched.
2. SUPERBANKSuperbank is also a camera based project. It consists of 2 GoPro Hero 5 (Australia) cameras back to back to encode 360 degrees. One camera is primary and the other is secondary. An ARM based MCU is used as the interfacing device between the two with the protocol being I2C. The other direct mode of communication between the cameras is USB protocol. Role: Developing I2C driver and application for MCU, Framework development of primary camera to over I2C driver of camera.
Status: Development phase
ACADEMIC PROJECTS
Textbook Companion Project – 2 times It is a project of MHRD. In this project, we have to write the codes of the examples of a book(as per our choice) in Scilab. Scilab is a language similar to Matlab.I have coded all the solved examples of the allotted textbook:
1. Applied Physics by P. K. Mittal2. Power Electronics by M.D. Singh, K.B. Khanchandani
The work done is available at http://scilab.in.This work was funded by the FOSSEE project, IIT Bombay.Role : Code developer.Team :. Individual
Blue Switches – ProjectIn this project, I have designed a system that controls the switching of the AC equipments using an Android app. This app sends some signal to the micro-control using Bluetooth as the mode of communication between the two and accordingly the controller controls the switching of the relays which automatically control AC equipments.Role : Electronic circuit Design and Programming. Team :. Team of 4.
Local Finding System–ProjectIn this project, We have developed a small device working as slave that will be placed in our luggage bag or with the kid to track him. The master device will be kept by the other person and it will continuously ping the device and the device will acknowledge the signal. If the acknowledgement is not received, then it will generate an alarm and vibrations in the master to indicate the loss. The maximum distance between both the transmitter and receiver can be 15 m. The master device also has the feature of reconfiguration to connect with any other slave.
Role : Programming, PCB Design.Team :. Team of 4.
PPT On Fingers–ProjectIn this project, We have developed a small product which can be used to change the slide using hand gestures from anywhere within 10m of the laptop. The device needs to be wore on the hand and if the user waives the hand in left direction then previous slide is displayed or if he waives the hand in right direction, next slide is displayed..Role : Algorithm developer, Programming, PCB Design.Team :. Team of 3.Multi-purpose AVR development board –Project
In this project, I have designed an AVR development board which can be used for learning purposes by the engineering students. The board is based on ATmega16 micro-controller and it includes basic facilities like LED array, LCD, Keypad, Serial Port, Motor Driver circuit, ADC connectors, connectors to all I/O Ports along with the power supply circuit.Role : Schematic Design and Routing.Team :. Individual
Voice command controlled Robot – ProjectThis project consists of a robot which does its activities on the basis of voice command send by me or any other human. It is based on Bluetooth serial communication with the microcontroller. It can also be controlled via Android app for Bluetooth.Role : Electronic circuit Design and Programming.Team :. Individual
Inspecto–ProjectIt is a robot that is controlled using an android app with an RF camera mounted over it that provides wireless feed to remote laptop. The size of the robot very small (10X5X5 cm). The motors used on the robots have a very high torque .Role : Programming, PCB Design.Team :. Team of 2.
Bomb Disposal Robot–ProjectIt is a robot that is controlled using an android app with an RF camera mounted over it along with a 3 DOF arm over it. It can be used to pick objects, carry them and place somewhere else. All the controls are done through an android app. Role : Programming, PCB Design.Team :. Team of 2.
AWARDS & MILESTONES (College as well as National Level)
TECHNICAL COMPETITIONS
Event Name Topic Position Held Organized by
Concept Gadget Over Speed Indicator 2nd ABESEC
Mini-Project Competition
Over Speed Controller(w/o µC ) 1st ICEIT Chapter ABES
Circuit Designing Plant Tendor 2nd ICEIT Chapter ABES
Robo Galaxy 2014 (Pravega) Mat-botrix Championship Finalist(AIR-9)
IISC, Bangalore(in association with UV Soft
Technologies)
Mini-Project Competition
Voice command controlled Robot using
Bluetooth1st ICEIT Chapter ABES
Circuit Designing GUI controlled Robot 2nd ABESEC
eYantra Robotics Competition 2014-15 Fire Fighting Robot 6th eYantra
(IIT-Bombay)
ACADEMICS
Class Position Held
B.Tech (I yr)2nd rank in college
(Director Silver Medal Holder)
XII 5th rank in Mathura district
TRAININGS
Course Name Company Scope Duration
First Mile Foundation Program NPTEL Online Certification Programming, Data Structures &
Algorithms 4 months
Advanced level Embedded systems (ARM7 ) Rawelcom Group
ARM7 architecture, SPI and Serial communication,
Interfacing of ADC, DAC, Micro SD Cards, RTOS etc
40 days
BSNL Gold Certificate Program BSNL
Broadband Technology&
Optical Fiber Communication
4 Hrs/weekfor 15 weeks
Mat-Botrix UV Soft Technologies Pvt. Ltd. GUI controlled Robotics 14 Hrs.
EDUCATIONAL QUALIFICATION
B. Tech (Electronics and Communication Engineering) with aggregate 79.62 % from Uttar Pradesh Technical University, Lucknow.
12th with 93.3% from Raman lal Shora wala Public School (C.B.S.E.) in 2011. 10th with 92% from Raman lal Shora wala Public School (C.B.S.E.) in 2009.
STRENGTHS
Quick learner. Good communication skills. Project leader. Punctuality & Regularity. Time management. Enthusiastic and can produce results under deadline constraints.
PERSONAL DETAILS
Father's Name Late Shri Vinod Kumar GargDate of Birth 21-12-1994Sex MaleMarital Status SingleLanguages known English and HindiPermanent Address MIG-547,Radhika Vihar, Mathura (UP) -281004Hobbies Innovative thinking, playing and watching cricket and football.
Date: 15-12-2016 Mohit Garg