V8 seriesOperation Manual

Record of Revisions

Reference numbers are shown at the bottom left corner on the back cover of each manual.

Printing Date Reference No. Revised Contents

February, 2011 1058NE0 First edition

July, 2012 1058NE1 Second edition

Preface

Congratulations on purchasing the drawing/editing software (V-SFT-5) for the MONITOUCH V8 series.For a clearer understanding, the MONITOUCH V8 series Reference Manual focuses on the outline of each function and the way of using the drawing/editing software (V-SFT-5) according to operating procedures.

Notes:

1. The copyright of the software is possessed by Hakko Electronics Co., Ltd.2. Reproduction of the contents of the software and this manual, in whole or in part, without permission

of Hakko Electronics Co., Ltd. is prohibited.3. The specifications of the software and the information in this manual are subject to change without

prior notice.4. If the specifications of the software do not correspond with the contents of this manual, the software

specifications have priority.5. No liability is assumed by Hakko Electronics Co., Ltd. with respect to the influence brought by the

result of using the software or this manual.6. You may use this software on a single central processing unit.

About Trademarks

Windows, Word and Excel are registered trademarks of Microsoft Corporation in the United States and other countries.

All other company names or product names are trademarks or registered trademarks of their respective holders.

Programmable logic controllers (PLCs) are products of their respective manufacturers.

About Manuals

This manual describes the structure, operating procedures and useful functions of the drawing software V-SFT-5 for the MONITOUCH V8 series. Following manuals are available for the MONTOUCH V8 series.

Manual Name Contents Reference No.

V8 Series Reference Manual

The functions and instructions of the V8 series are explained. 1055NEx

V Series Macro Reference An overview of macros as well as macro editor operations and macro command descriptions are explained in detail.

1056NEx

V8 Series Introductory Manual

The basic operating procedure of V-SFT version 5 is explained in detail.

1057NEx

V8 Series Operation Manual (this manual)

The information related to the operations of V-SFT version 5, such as software composition, editing procedure or limitations, is explained in detail.

1058NEx

V8 Series Reference: Additional Functions

The additional functions of the MONITOUCH V8 series for the V-SFT version 5.1.0.0 and later are explained.

1060NEx

V8 Series Hardware Specifications

Notes on usage and hardware specifications for the V8 series are explained.

2016NEx

V806 Series Hardware Specifications

Notes on usage and hardware specifications for the V806 series are explained.

2017NEx

V815 Hardware Specifications

Notes on usage and hardware specifications for the V815 are described.

2018NEx

V808CH Hardware Specifications

Notes on usage and hardware specifications for the V808CH are described.

2019NEx

V8 Series Connection Manual

The connection and communication parameters for the V8 series and controllers are explained in detail.

2201NEx

V Series DLL Function Specifications

An overview and contents of DLL files used for Ethernet (HKEtn20.DLL) and CF card (VCFAcs.DLL) are explained in detail.

1059NEx

V8 Series Models

The following MONITOUCH V8 series models are available:

Please note that the V8 series model names are used as listed above in the manuals.

Generic Name Series Model V Series Classification

V series V8 series

V815iX V8i or V8i series

V812iS V8i or V8i series

V812S V8

V810iS V8i or V8i series

V810S V8

V810iT V8i or V8i series

V810T V8

V810iC V8i or V8i series

V810C V8

V808iS V8i or V8i series

V808S V8

V808iC V8i or V8i series

V808C V8

V806iT

V8i or V806i seriesV806iC

V806iM

V806T

V8 or V806 seriesV806C

V806M

V808iCH

V808CH

V8 Series Functions

The V8 series is equipped with the following functions. Depending on the V series model, some functions may not be available. Please keep this limitation in mind. For more information, refer to the related chapter.

V8 Series

V8 Series Reference Manual V8 Series

Chapter Content V815iX V812iSV810iSV810iTV808iS

V812SV810SV810TV808S

V810iCV808iC

V810CV808C

V808iCH V808CH V806iTV806iCV806iM

V806TV806CV806M

2 Overlap

Superimpose Video overlap

3 Switch

Coordinate output (for analog only)

Transparency

Multi-output

Delay/Message box

4 Lamp

Transparency

5 Data display

6 Message display

Comment display

7 Entry mode

Automatic writing when the entry target has been moved

[Function: Cancel] switch

[Function: Max./Min. Value Entry] switch

Password: variable

Digital switch (add/subtract switch)

8 Graph

Scale: variable

9 Trend graph

XY parameters

X scale

10 Sampling

Acknowledge display function

11 Graphic

12 Time display/calendar

13 Recipe mode

: Available : Optionally available : Not available*1 Not supported by V806iM and V806M*2 Available only for UDP/IP.

14 Multimedia Animation Video/RGB display JPEG display *1 *1

Sound replay function 15 Others

Data block area

Memory card mode

CF card

SRAM

CREC Memo pad (for analog only)

16 Print

Data sheet print Serial

USB

17 Barcode One-dimensional

Two-dimensional

18 CF card Built-in

USB 2-drive connection

19 Ethernet function Screen data transfer PLC connection *2 *2 *2

E-mail Web server

A1 Buffering area

Store target: SRAM

Store target: CF card

A2 SRAM/clock setting

A3 Display language

Multi-language selection

Displayed character selection

Multi-language screen

Windows fonts

V8 Series Reference Manual V8 Series

Chapter Content V815iX V812iSV810iSV810iTV808iS

V812SV810SV810TV808S

V810iCV808iC

V810CV808C

V808iCH V808CH V806iTV806iCV806iM

V806TV806CV806M

Functions Described in the V8 Series Reference: Additional Functions

V8 SeriesReference: Additional Functions

V8 Series

Chap. Contents V815iX V812iSV810iSV810iTV808iS

V812SV810SV810TV808S

V810iCV808iC

V810CV808C

V808iCH V808CH V806iTV806iCV806iM

V806TV806CV806M

2 Global overlap

3 SwitchMulti-function

Continuous buzzer

4 Word lamp

5 Data displayOffset value designation memory

Attribute change

6 Data display with entry function

Slider switch

Numerical data entry (extended)

7 Graph (real values)

Panel meter function extended

Alarm 2

*3 *3 *3 *3

Indicator setting extended *1 *1 Scale setting extended *1 *1 *1 *3 *1 *3 *1 *1 *1 *2 *3 *1 *2 *3

Numerical data display *3 *3 *3 *3

8 Trend graph real valuesSampling Buffer Word No. extended

Trend samplingGraph show/hide function

9 Alarm functionParameter addition function

Acknowledge

10 RGB display(touch switch emulation)

Enlarged display (full screen)

Size adjustment 11 Scroll

12 Expanded data sheet

13 Stroke fonts *1 *1

Extended point size range for Windows fonts

16-language selection

14 CF card Screen added

Message storage

Addition of titles to CSV file (sampling data)

: Available : Optionally available : Not available*1 The 128-color mode is not supported.*2 The V806M is not supported.*3 Not available on the portrait-orientated V808C/V806

15 Item display function

16 FTP server 17 E-mail certification

Two Ethernet ports 18 Network camera *1 *1 *3 *1 *1*2*3 19 Remote desktop window

display (for analog only)*1 *1 *3 *1 *1*2

20 MES interface 21 Operation log/Log viewer

22 Security

23 Macros

24 Tag editing

25 Jump to the target screen

Refined search filter for project list-view window

Memory batch change

Selection order batch change

Cross-referenceMacro command search

Text search and replacement

Image file 3D part conversion

Text comparison

Selective transfer

Message/comment transfer

26 USB barcode reader USB keyboard USB mouse *3 *3 *3 *3USB-FDD

27 Ladder transfer USB

Ethernet

V8 SeriesReference: Additional Functions

V8 Series

Chap. Contents V815iX V812iSV810iSV810iTV808iS

V812SV810SV810TV808S

V810iCV808iC

V810CV808C

V808iCH V808CH V806iTV806iCV806iM

V806TV806CV806M

Notes on Safe Usage of MONITOUCH

In this manual, you will find various notes categorized under the following levels with the signal words DANGER, and CAUTION.

Note that there is a possibility that the item listed with may have serious ramifications.

DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury and could cause property damage.

Never use the input function of MONITOUCH for operations that may threaten human life or damage the system, such as switches to be used in case of emergency. Please design the system so that it can cope with the malfunction of a touch switch. A malfunction of the touch switch will result in machine accident or damage.

Turn off the power supply when you set up the unit, connect new cables, or perform maintenance or inspections. Failure to do so could cause electric shock or damage to the unit.

Never touch any terminals while the power is on. Otherwise, electric shock may occur. You must put a cover on the terminals on the unit when you turn the power on and operate the unit. Without

the terminal cover in place, electric shock may occur. The liquid crystal in the LCD panel is a hazardous substance. If the LCD panel is damaged, do not ingest

the leaked liquid crystal. If the liquid crystal spills on skin or clothing, use soap and wash off thoroughly. For MONITOUCH using a lithium battery, never disassemble, recharge, deform by pressure, short-circuit,

reverse the polarity (+/) of the battery, or dispose of the battery in fire. Failure to follow these conditions will lead to explosion or fire.

For MONITOUCH using a lithium battery, never use a battery that is deformed, leaks, or shows any other signs of abnormality. Failure to follow these conditions will lead to explosion or fire.

CAUTION

DANGER

Check the appearance of MONITOUCH when it is unpacked. Do not use the unit if any damage or deformation is found. Failure to do so may lead to fire, damage, or malfunction.

For use in a facility or for a system related to nuclear energy, aerospace, medical, traffic equipment, or mobile installations, please consult your local distributor.

Operate (or store) MONITOUCH under the conditions indicated in this manual and related manuals. Failure to do so could cause fire, malfunction, physical damage or deterioration.

Understand the following environmental limits for use and storage of MONITOUCH. Otherwise, fire or damage to the unit may result.

- Avoid locations where there is a possibility that water, corrosive gas, flammable gas, solvents, grinding fluids or cutting oil can come into contact with the unit.

- Avoid high temperature, high humidity, and outside weather conditions, such as wind, rain or direct sunlight.

- Avoid locations where excessive dust, salt, and metallic particles are present.- Avoid installing the unit in a location where vibration or physical shock may be transmitted.

Equipment must be correctly mounted so that the main terminal of MONITOUCH can not be touched inadvertently. Otherwise, an accident or electric shock may occur.

Tighten the fixtures of MONITOUCH with a torque in the specified range. Excessive tightening may distort the panel surface. Loose tightening may cause MONITOUCH to come off, malfunction, or be short-circuited.

Check periodically that terminal screws on the power supply terminal block and fixtures are firmly tightened. Loosened screws may result in fire or malfunction.

Tighten terminal screws on the power supply terminal block equally to a torque of 0.5 Nm. Improper tightening of screws may result in fire, malfunction, or other trouble.

MONITOUCH has a glass screen. Do not drop or give physical shock to the unit. Otherwise, the screen may be damaged.

Connect the cables correctly to the terminals of MONITOUCH in accordance with the specified voltage and wattage. Over-voltage, over-wattage, or incorrect cable connection could cause fire, malfunction or damage to the unit.

Be sure to establish a ground of MONITOUCH. The FG terminal must be used exclusively for the unit with the level of grounding resistance less than 100. Otherwise, electric shock or fire may occur.

Prevent any conductive particles from entering the MONITOUCH. Failure to do so may lead to fire, damage, or malfunction.

After wiring is finished, remove the paper used as a dust cover before starting to operate MONITOUCH. Operation with the cover attached may result in accident, fire, malfunction, or other trouble.

Do not attempt to repair MONITOUCH at your site. Ask Hakko or the designated contractor for repair. Do not disassemble or modify MONITOUCH. Otherwise, malfunctions may occur. Hakko Electronics Co., Ltd. is not responsible for any damages resulting from repair, overhaul or

modification of MONITOUCH that was performed by an unauthorized person. Do not use a sharp-pointed tool when pressing a touch switch. Doing so may damage the screen. Only experts are authorized to set up the unit, connect the cables, or perform maintenance and inspections. For MONITOUCH using a lithium battery, handle the battery with care. The combustible materials such as

lithium or organic solvent contained in the battery may generate heat, explode, or catch fire, resulting in personal injury or fire. Read related manuals carefully and handle the lithium battery correctly as instructed.

When using a MONITOUCH that has an analog switch resolution with resistance film, do not press two or more points on the screen at the same time. If two or more positions are pressed at the same time, the switch located between the pressed positions will activate.

Take safety precautions during such operations as setting change during running, forced output, start, and stop. Any misoperation may cause unexpected machine motions, resulting in machine accident or damage.

In facilities where a failure of MONITOUCH could lead to accident threatening human life or other serious damage, be sure that the facilities are equipped with adequate safeguards.

At the time of disposal, MONITOUCH must be treated as industrial waste. Before touching MONITOUCH, discharge static electricity from your body by touching grounded metal.

Excessive static electricity may cause malfunction or other trouble.

CAUTION

[General Notes] Never bundle control cables and input/output cables with high-voltage and large-current carrying cables such

as power supply cables. Keep these cables at least 200 mm away from high-voltage and large-current carrying cables. Otherwise, malfunction may occur due to noise.

When using MONITOUCH in an environment where a source of high-frequency noise is present, it is recommended that the FG shielded cable (communication cable) be grounded at its ends. However, the cable may be grounded only at one end if necessary due to unstable communication conditions, or for any other reason.

Plug connectors or sockets of MONITOUCH in their correct orientation. Otherwise, malfunctions may occur. Do not use thinners for cleaning because they may discolor the MONITOUCH surface. Use an alcohol-based

cleaner which is commercially available. If a data receive error occurs when MONITOUCH and the counterpart (PLC, temperature controller, etc.) are

started at the same time, read the manual for the counterpart unit and handle the error correctly. Avoid discharging static electricity on the mounting panel of MONITOUCH. Static charges can damage the

unit and cause malfunctions. Otherwise, malfunction may occur due to noise. Avoid prolonged display of any fixed pattern. Due to the characteristics of the liquid crystal display, an

afterimage may occur. If a prolonged display of a fixed pattern is expected, use the auto OFF function of the backlight.

Contents

1 Introduction1.1 Installation

Before Installing V-SFT....................................................................................................... 1-1Operating Environment..............................................................................................................1-1Copyright ...................................................................................................................................1-1Notes on Usage .........................................................................................................................1-1

Installation ........................................................................................................................... 1-2Installation Procedure ................................................................................................................1-2

1.2 UninstallationUninstalling from Start Menu............................................................................................... 1-6Uninstalling from Control Panel........................................................................................... 1-8

1.3 StartingOpening a New File........................................................................................................... 1-10Opening an Existing File ................................................................................................... 1-13Saving the File .................................................................................................................. 1-16

Save.........................................................................................................................................1-16Save As ...................................................................................................................................1-17

Closing the File ................................................................................................................. 1-181.4 Quitting

2 Editor Configuration2.1 Names of Components2.2 Menu Bar

[File] Menu .......................................................................................................................... 2-3[Property] Dialog ........................................................................................................................2-4

[Edit] Menu.......................................................................................................................... 2-7[View] Menu ........................................................................................................................ 2-7[Parts] Menu........................................................................................................................ 2-7[Registration Item] Menu..................................................................................................... 2-8[Screen Setting] Menu......................................................................................................... 2-8[System Setting] Menu........................................................................................................ 2-8[Tool] Menu ......................................................................................................................... 2-9[Window] Menu ................................................................................................................... 2-9[Help] Menu....................................................................................................................... 2-10

2.3 Menu Item [View]Display Method ................................................................................................................. 2-11

Item Dialog...............................................................................................................................2-11How to Move ..................................................................................................................... 2-12

Item Dialog...............................................................................................................................2-13How to Inset ...................................................................................................................... 2-14

Item Dialog...............................................................................................................................2-15Floating ....................................................................................................................................2-15Changing the Size of the List-view Window.............................................................................2-16

2.4 Types of [View]2.5 Toolbar

Display Method ................................................................................................................. 2-19How to Move..................................................................................................................... 2-20How to Inset ...................................................................................................................... 2-21Names and Contents of Tools .......................................................................................... 2-22

Standard.................................................................................................................................. 2-22Draw........................................................................................................................................ 2-23Drawing Method ...................................................................................................................... 2-24Edit .......................................................................................................................................... 2-25Layout ..................................................................................................................................... 2-26Parts........................................................................................................................................ 2-27Parts Mini ................................................................................................................................ 2-28Pattern..................................................................................................................................... 2-28Multi-language......................................................................................................................... 2-29Font ......................................................................................................................................... 2-29Overlap.................................................................................................................................... 2-30Component Parts Editing ........................................................................................................ 2-30

2.6 Screen CompositionScreen Outline .................................................................................................................. 2-31

What Is an ID? ........................................................................................................................ 2-33ID Number Check.................................................................................................................... 2-35

Screen Structure ............................................................................................................... 2-36Screen Resolution................................................................................................................... 2-36Screen Capacity...................................................................................................................... 2-37Auto Adjustment for Screen Resolution .................................................................................. 2-37

Screen Setting .................................................................................................................. 2-39[Main] Tab Window ................................................................................................................. 2-39[Entry] Tab Window................................................................................................................. 2-39[Others] Tab Window .............................................................................................................. 2-40[PLC Memory Transfer] Tab Window...................................................................................... 2-41

3 Screen Editing3.1 Editing Procedure3.2 Setting Up Editing Environment

Background Color Setting ................................................................................................... 3-2Grid Setting ......................................................................................................................... 3-3

What Is Grid?.......................................................................................................................... 3-3Grid Setting ............................................................................................................................... 3-4

Display Environment Setting............................................................................................... 3-7[Display] Tab Window ............................................................................................................... 3-7[Others] Tab Window ................................................................................................................ 3-9

3.3 Basic OperationCalling a Screen................................................................................................................ 3-12

From the [View] Menu ............................................................................................................. 3-12From the Screen List............................................................................................................... 3-12From Project View................................................................................................................... 3-14

Copying a Screen ............................................................................................................. 3-16From the Screen List............................................................................................................... 3-16

Changing Screen Number ................................................................................................ 3-19Deleting a Screen ............................................................................................................. 3-22

From the [Edit] Menu............................................................................................................... 3-22From the Screen List............................................................................................................... 3-23

3.4 Setting MenuMenu Types ...................................................................................................................... 3-25

Pull-down Type ........................................................................................................................3-25Option Button...........................................................................................................................3-25Numerical Data Entry Box Type ..............................................................................................3-26Check Box ...............................................................................................................................3-26List Type ..................................................................................................................................3-27Command Button.....................................................................................................................3-27Underlined Type for Numerical Data Entry ..............................................................................3-28Underlined Type for Selection .................................................................................................3-28

Memory Setting ................................................................................................................. 3-29Display Type for Memory Setting.............................................................................................3-29Memory Types .........................................................................................................................3-32

3.5 Color Types and SettingsColor Type Setting ............................................................................................................ 3-35Color Types....................................................................................................................... 3-3564k-color Type .................................................................................................................. 3-36

[Custom Color] Dialog..............................................................................................................3-3732k-color Type .................................................................................................................. 3-39

[Custom Color] Dialog..............................................................................................................3-39128-color Type .................................................................................................................. 3-40

[Custom Color] Dialog for 128-color Type ...............................................................................3-41Monochrome 16 Gray Scales............................................................................................ 3-42

Monochrome-Type Colors .......................................................................................................3-42Blinking Setting ................................................................................................................. 3-43

Blinking Setting Procedure ......................................................................................................3-43Blinking Time Setting ...............................................................................................................3-44

3.6 PartsParts Types and Limitation................................................................................................ 3-45

Types of Parts..........................................................................................................................3-45Capacity for Parts Placement ..................................................................................................3-47

Placing Parts ..................................................................................................................... 3-49From the Parts List ..................................................................................................................3-49From the [Parts] Menu .............................................................................................................3-51From the Parts Toolbar............................................................................................................3-52From Catalog View ..................................................................................................................3-53

How to Modify the Placed Part.......................................................................................... 3-55For Single Part.........................................................................................................................3-55For Linked Part ........................................................................................................................3-61

3.7 Parts Placement and SettingOverlap.............................................................................................................................. 3-65

Normal Overlap Display...........................................................................................................3-65Multi-overlap (Call-overlap) Display.........................................................................................3-72

Switch / Lamp.................................................................................................................... 3-73Data Display...................................................................................................................... 3-74

Numerical Data Display / Character Display / Message Display .............................................3-74Table Data Display ..................................................................................................................3-75

Message Display / Comment Display ............................................................................... 3-80Entry Mode........................................................................................................................ 3-81Graph ................................................................................................................................ 3-84Trend Graph / Trend Sampling ......................................................................................... 3-85Data Sampling................................................................................................................... 3-86Alarm Tracking / Bit Order (Time Order) Alarming / Alarm Sub Display / Alarm Logging . 3-87Graphic / Graphic Relay.................................................................................................... 3-88Macro / Interval Timer ....................................................................................................... 3-89Time Display / Calendar.................................................................................................... 3-90

Recipe............................................................................................................................... 3-91Animation / Sound............................................................................................................. 3-92Video Display / JPEG Display........................................................................................... 3-93Data Block Area / Memory Card / Memo Pad................................................................... 3-94

3.8 Useful Functions for Screen Editing[Edit] Menu........................................................................................................................ 3-95Right-click Menu (with No Item Selected) ......................................................................... 3-96Right-click Menu (with an Item Selected).......................................................................... 3-97Paste to the Selected Screen ........................................................................................... 3-98Multi Copy ......................................................................................................................... 3-99

Setting Example .................................................................................................................... 3-101Alignment (E.g. Flush Left) ............................................................................................. 3-102Arrangement (Equal) (E.g. Vertically) ............................................................................. 3-104Put All in Same Size ....................................................................................................... 3-105Changing Part ................................................................................................................. 3-106

Link / Link Cancel.................................................................................................................. 3-106Change to Switch / Change to Lamp .................................................................................... 3-106Modify Part ............................................................................................................................ 3-108

Batch Change ................................................................................................................. 3-109Setting Method ...................................................................................................................... 3-109

Detail Setting................................................................................................................... 3-111Setting Method ...................................................................................................................... 3-111

Selection Environment Setting........................................................................................ 3-112Setting Method ...................................................................................................................... 3-112

4 Drawing4.1 Drawing Toolbar

Display Method ................................................................................................................... 4-1Icons ................................................................................................................................... 4-2

4.2 Attribute Setting IconSelecting Colors.................................................................................................................. 4-5Selecting Arrow Type.......................................................................................................... 4-7Selecting Line Style ............................................................................................................ 4-7

Limitations on Line Styles ......................................................................................................... 4-7

4.3 Drawing MethodsLine ..................................................................................................................................... 4-8

Single Line ................................................................................................................................ 4-8Continuous Line ........................................................................................................................ 4-9

Box.................................................................................................................................... 4-10Rectangle ................................................................................................................................ 4-10Parallelogram .......................................................................................................................... 4-14Polygon ................................................................................................................................... 4-15Round Chamfering / Chamfering ............................................................................................ 4-18

Circle................................................................................................................................. 4-19Circle ....................................................................................................................................... 4-19Arc and Sector ........................................................................................................................ 4-21Ellipse...................................................................................................................................... 4-24Elliptical Arc and Elliptical Sector ............................................................................................ 4-26

Text ................................................................................................................................... 4-31How to Enter or Place Text and Multi-text............................................................................... 4-31[Text] Dialog ............................................................................................................................ 4-32[Multi Text] Dialog ................................................................................................................... 4-36

Dot .................................................................................................................................... 4-38Drawing Method ...................................................................................................................... 4-38

Paint .................................................................................................................................. 4-39Paint Command Usage............................................................................................................4-39How to Check the Painted Area...............................................................................................4-40

Paint Properties................................................................................................................. 4-41Scale ................................................................................................................................. 4-42

Bar Graph Scale ......................................................................................................................4-42Pie Graph Scale.......................................................................................................................4-43Trend Graph Scale ..................................................................................................................4-46

Pattern............................................................................................................................... 4-48Placing Patterns.......................................................................................................................4-48Placing Multiple Patterns Continuously ...................................................................................4-49

Graphic Call ...................................................................................................................... 4-51Placing Graphics......................................................................................................................4-51

Screen Library................................................................................................................... 4-53Placing Screen Library.............................................................................................................4-53[Screen Library] Dialog ............................................................................................................4-55

4.4 Graphic Properties SettingHow to Display the Item Dialog................................................................................................4-58Example of Item Dialog............................................................................................................4-59

5 Registration Items5.1 Outline of Registration Items5.2 Contents of Registration Items5.3 Screen

Calling a Screen.................................................................................................................. 5-3Screen Editing..................................................................................................................... 5-3

5.4 MessageMessage Structure .............................................................................................................. 5-4

Relationship between Group Numbers and Absolute Addresses..............................................5-5Calling a Message............................................................................................................... 5-6Message Editing.................................................................................................................. 5-7

Copying and Pasting Messages ................................................................................................5-7Deleting Messages ....................................................................................................................5-8Message Search and Replacement...........................................................................................5-9

Message Display Environment Setting ............................................................................. 5-10Mark.........................................................................................................................................5-11

5.5 Macro BlockMacro Block Structure....................................................................................................... 5-12Calling a Macro Block ....................................................................................................... 5-12Macro Block Editing .......................................................................................................... 5-12

5.6 Graphic LibraryGraphic Library Structure .................................................................................................. 5-13Calling the Graphic Library................................................................................................ 5-13Graphic Library Editing...................................................................................................... 5-14

Offset Position Setting .............................................................................................................5-14Parameter Setting....................................................................................................................5-15Data Display ............................................................................................................................5-22

Graphic Library Environment Setting ................................................................................ 5-24Base Screen Dsp. ([Others] Tab Window)...............................................................................5-24Background ([Others] Tab Window) ........................................................................................5-25

5.7 Overlap LibraryOverlap Library Structure.................................................................................................. 5-26Calling an Overlap Library ................................................................................................ 5-26Editing an Overlap Library ................................................................................................ 5-27

Placing an Overlap Display Part ............................................................................................. 5-27Item Placement on Overlap Display........................................................................................ 5-28

Other Settings ................................................................................................................... 5-29Base Screen Display............................................................................................................... 5-29Macro Setting .......................................................................................................................... 5-30

5.8 Screen LibraryOutline of Screen Library .................................................................................................. 5-31

Saving of Screen Memory....................................................................................................... 5-31Screen Parts Management Through Screen Library............................................................... 5-32

Screen Library Structure ................................................................................................... 5-32Calling a Screen Library.................................................................................................... 5-33Screen Library Editing....................................................................................................... 5-33

Notes on Editing...................................................................................................................... 5-33Offset Position Setting............................................................................................................. 5-34

Placing a Screen Library................................................................................................... 5-345.9 Data Block

Data Block Structure ......................................................................................................... 5-35Calling a Data Block.......................................................................................................... 5-35Data Block Editing............................................................................................................. 5-36

Parts........................................................................................................................................ 5-36Drawing ................................................................................................................................... 5-36

Data Block Environment Setting ....................................................................................... 5-37Base Screen Dsp. ([Others] Tab Window) ............................................................................. 5-37Background ([Others] Tab Window)........................................................................................ 5-38

5.10 PatternPattern Structure............................................................................................................... 5-39Calling a Pattern ............................................................................................................... 5-39Pattern Editing .................................................................................................................. 5-40

[Pen] Icon ................................................................................................................................ 5-40[Eraser] Icon............................................................................................................................ 5-41[Straight Line] Icon .................................................................................................................. 5-41[Rectangle] Icon ...................................................................................................................... 5-42[Circle] Icon ............................................................................................................................. 5-42[Text] Icon ............................................................................................................................... 5-43[Paint] Icon .............................................................................................................................. 5-45[Box Select Area] Icon............................................................................................................. 5-45

Transforming Patterns ...................................................................................................... 5-47Image File Import and Storage ......................................................................................... 5-50

Importing an Image File .......................................................................................................... 5-50Storing in an Image File .......................................................................................................... 5-53

Pattern Environment Setting ............................................................................................. 5-53Display Environment ............................................................................................................... 5-54Background Color Setting ....................................................................................................... 5-54

Placing a Pattern............................................................................................................... 5-555.11 Data Sheet

Data Sheet Structure ........................................................................................................ 5-56Calling a Data Sheet ......................................................................................................... 5-56Data Sheet Editing ............................................................................................................ 5-57

Data Sheet Setting .................................................................................................................. 5-57Drawing ................................................................................................................................... 5-58

Data Sheet Environment Setting....................................................................................... 5-59Display Environment................................................................................................................5-59Grid Setting..............................................................................................................................5-60

5.12 Page BlockPage Block Structure ........................................................................................................ 5-61Calling a Page Block ......................................................................................................... 5-61Page Block Editing ............................................................................................................ 5-62

5.13 Direct BlockDirect Block Structure ....................................................................................................... 5-64Calling a Direct Block ........................................................................................................ 5-64Direct Block Editing ........................................................................................................... 5-65

5.14 Screen BlockScreen Block Structure ..................................................................................................... 5-67Calling a Screen Block ...................................................................................................... 5-67Screen Block Editing ......................................................................................................... 5-68

5.15 TileTile Structure..................................................................................................................... 5-69Calling a Tile ..................................................................................................................... 5-69Tile Editing ........................................................................................................................ 5-70

5.16 AnimationAnimation Function Structure............................................................................................ 5-72Calling an Animation Function .......................................................................................... 5-72Animation Editing .............................................................................................................. 5-73Frame Editing.................................................................................................................... 5-75

Frame Structure.......................................................................................................................5-75Frame Editing ..........................................................................................................................5-75

5.17 CommentComment Structure ........................................................................................................... 5-76

Limitations on Comments ........................................................................................................5-76Calling a Comment............................................................................................................ 5-77Comment Editing............................................................................................................... 5-77

Entering a Comment................................................................................................................5-77Text Properties ........................................................................................................................5-78Deleting a Comment ................................................................................................................5-79Comment Import and Export....................................................................................................5-80

[Page] Menu...................................................................................................................... 5-835.18 Multi-language

6 Transfer with V86.1 Transfer Methods

List of Transfer Methods ..................................................................................................... 6-1Using a Communication Cable............................................................................................ 6-1

V-CP (Serial Port) ......................................................................................................................6-1Ethernet (LAN Port) ...................................................................................................................6-2USB (USB-B Port) .....................................................................................................................6-2

Using a Card ....................................................................................................................... 6-3CF Card .....................................................................................................................................6-3Memory Card .............................................................................................................................6-3

Using a Modem................................................................................................................... 6-46.2 Type of Transferred Data

Transfer Data List................................................................................................................ 6-5System Program File .................................................................................................................6-6

6.3 PreliminariesPreparation for MONITOUCH............................................................................................. 6-7

New MONITOUCH.................................................................................................................... 6-7Existing MONITOUCH .............................................................................................................. 6-8

Preparation for Peripheral Equipment................................................................................. 6-96.4 Transfer Procedure (Using a Communication Cable)

V-CP ................................................................................................................................. 6-10System Configuration.............................................................................................................. 6-10Transfer Procedure from the Editor to MONITOUCH ............................................................. 6-10Transfer Procedure from the Editor to MONITOUCH ............................................................. 6-14Data Comparison between Editor and MONITOUCH ............................................................. 6-16

Ethernet ............................................................................................................................ 6-19System Configuration.............................................................................................................. 6-19Transfer Procedure from the Editor to MONITOUCH ............................................................. 6-19Transfer Procedure from the Editor to MONITOUCH ............................................................. 6-24Data Comparison between Editor and MONITOUCH ............................................................. 6-27

USB................................................................................................................................... 6-29System Configuration.............................................................................................................. 6-29Before Transfer via USB ......................................................................................................... 6-29Transfer Procedure from the Editor to MONITOUCH ............................................................. 6-33

6.5 Transfer Procedure (Using a Card)CF Card ............................................................................................................................ 6-36

System Configuration.............................................................................................................. 6-36Transfer Procedure from the CF card to MONITOUCH .......................................................... 6-36

Memory Card .................................................................................................................... 6-43System Configuration.............................................................................................................. 6-43Transfer Procedure from Memory Card to MONITOUCH ....................................................... 6-43

6.6 Transfer Procedure (Using a Modem)Preliminaries ..................................................................................................................... 6-49Setting Procedure ............................................................................................................. 6-49

AT Command Setting.............................................................................................................. 6-50Setting on the V Series ........................................................................................................... 6-52Description of Connections ..................................................................................................... 6-53Screen Data Transfer.............................................................................................................. 6-54

Transfer Error Messages Displayed on V-SFT................................................................. 6-556.7 After Transfer (Communication with PLC)

Connection with PLC ........................................................................................................ 6-56Preliminaries on MONITOUCH......................................................................................... 6-56

Switching to RUN (= Communicating) Mode........................................................................... 6-56Display Contents after Communication................................................................................... 6-57

7 Print7.1 Overview

Available Printers ................................................................................................................ 7-1Operating Procedure........................................................................................................... 7-1[Option Setting] Dialog ........................................................................................................ 7-2

[Page Setting] Dialog ................................................................................................................ 7-2Output Range............................................................................................................................ 7-3Print Format .............................................................................................................................. 7-5

Print Preview....................................................................................................................... 7-6Operating Procedure................................................................................................................. 7-6

Print Current Window.......................................................................................................... 7-6Operating Procedure................................................................................................................. 7-6

Print Example...................................................................................................................... 7-7Screen Output............................................................................................................................7-7List Output .................................................................................................................................7-7Table Print .................................................................................................................................7-8System Setting...........................................................................................................................7-9Memory Use List........................................................................................................................7-9Use Cross-reference................................................................................................................7-10Animation.................................................................................................................................7-11

8 Useful Functions8.1 Simulator

Overview ............................................................................................................................. 8-1Operating Procedure........................................................................................................... 8-3Connecting a Computer and the V8 series ......................................................................... 8-4

Via V-CP....................................................................................................................................8-4Via Ethernet ...............................................................................................................................8-5Via USB .....................................................................................................................................8-5

Screen Data and Simulator Program Transfer.................................................................... 8-6Screen Data Transfer ................................................................................................................8-6Setting on MONITOUCH ...........................................................................................................8-8

Starting and Quitting ......................................................................................................... 8-11Starting ....................................................................................................................................8-11Quitting ....................................................................................................................................8-12

Starting and Stopping Communication.............................................................................. 8-13Starting Communication ..........................................................................................................8-13Stopping Communication.........................................................................................................8-13Communication Setting............................................................................................................8-14Via Ethernet .............................................................................................................................8-15Via USB ...................................................................................................................................8-15

Structure of the [Simulator] Window.................................................................................. 8-16Menu Bar .................................................................................................................................8-17Icon Menu ................................................................................................................................8-20Structure of the Sheet..............................................................................................................8-21[Untitled] Sheet ........................................................................................................................8-23Memory Addresses Displayed on Simulator............................................................................8-25

Test Example .................................................................................................................... 8-26Testing Bit Access Device .......................................................................................................8-26Testing Word Access Device...................................................................................................8-28

Error List............................................................................................................................ 8-308.2 Emulator

Overview ........................................................................................................................... 8-32Operating Procedure......................................................................................................... 8-33Starting and Quitting ......................................................................................................... 8-33

Starting ....................................................................................................................................8-33Quitting ....................................................................................................................................8-34

Operation .......................................................................................................................... 8-35Structure of the [Emulator] Window .................................................................................. 8-36

Menu Bar .................................................................................................................................8-36Icon Menu ................................................................................................................................8-37

8.3 Useful Tools for Creating a ManualCopying Screen Image to the Clipboard ........................................................................... 8-38

Operating Procedure ...............................................................................................................8-39Copying an Image Displayed on the Editor .............................................................................8-39Pasting the Copied Image on another Application Software ...................................................8-40

Converting to Rich Text Format ........................................................................................ 8-41Operating Procedure ...............................................................................................................8-41

Emulator............................................................................................................................ 8-43Copying an Image Displayed on Emulator.............................................................................. 8-43Pasting the Copied Image on another Application Software................................................... 8-44

8.4 Item ListDisplay Method ................................................................................................................. 8-45Item List Window............................................................................................................... 8-46

Configuration........................................................................................................................... 8-46Icon Menu ............................................................................................................................... 8-47

Operation Procedure......................................................................................................... 8-48Text Change............................................................................................................................ 8-48Memory Change...................................................................................................................... 8-50Coordinate Change ................................................................................................................. 8-51Display of the Item Dialog ....................................................................................................... 8-52

8.5 List of Memory Address in UseOperation Procedure......................................................................................................... 8-53

Searching with Memory Range Designated............................................................................ 8-53Searching the Whole File ........................................................................................................ 8-55When [Cross-reference] Is Not Checked: ............................................................................... 8-56

8.6 Customizing the ToolbarOverview........................................................................................................................... 8-57Icon ................................................................................................................................... 8-57

How to Add.............................................................................................................................. 8-57How to Delete.......................................................................................................................... 8-59How to Change Order ............................................................................................................. 8-60

Separator Line .................................................................................................................. 8-61What Is Separator Line? ....................................................................................................... 8-61How to Add.............................................................................................................................. 8-61How to Delete.......................................................................................................................... 8-62

8.7 Other Functions in the [Tool] Menu[Tool] Menu....................................................................................................................... 8-63Error Check....................................................................................................................... 8-64

Operating Procedure............................................................................................................... 8-64Reading the Error Check List .................................................................................................. 8-65

List of Memory Use ........................................................................................................... 8-67Operating Procedure............................................................................................................... 8-67

Changing Memory............................................................................................................. 8-69Changing All Memory.............................................................................................................. 8-69Changing Memory of Selected Items Only.............................................................................. 8-71

Windows Font Change All/List/Registration...................................................................... 8-72DXF File Convert .............................................................................................................. 8-73

Operating Procedure............................................................................................................... 8-73Copy Image to Pattern ...................................................................................................... 8-75

Operating Procedure............................................................................................................... 8-75Tag Table.......................................................................................................................... 8-77

8.8 File ManagementFile Management Outline.................................................................................................. 8-78

File Management Functions.................................................................................................... 8-78Files for File Management....................................................................................................... 8-78

File Comparison................................................................................................................ 8-79Operating Procedure............................................................................................................... 8-79[Comparison] Window ............................................................................................................. 8-80How to Copy after Comparison ............................................................................................... 8-82

Copying the File ................................................................................................................ 8-89Deleting the File ................................................................................................................ 8-90

Dividing and Combining the File ....................................................................................... 8-91Dividing the File .......................................................................................................................8-91Combining the File...................................................................................................................8-92

8.9 WizardOverview ........................................................................................................................... 8-93Starting Wizard.................................................................................................................. 8-93

Start from Catalog View...........................................................................................................8-93Start from [Parts] Menu............................................................................................................8-94

8.10 Component PartsOverview ........................................................................................................................... 8-95Component Parts Placement ............................................................................................ 8-95Details of Component Parts .............................................................................................. 8-96

Appendix 1 FontFont Types

Differences between Fonts and Windows Fonts .................................................................... A1-2Distinguishing Fonts on MONITOUCH ................................................................................... A1-3

Font Setting Procedure .....................................................................................................A1-4Fonts....................................................................................................................................... A1-4Transfer Font Setting .............................................................................................................. A1-6

Font Size ...........................................................................................................................A1-7Enlarge X/Y............................................................................................................................. A1-7Points...................................................................................................................................... A1-7

Memory Sizes of Fonts .....................................................................................................A1-8Language Entry Method

English/Western Europe, English/Western Europe HK Gothic, and English/Western Europe HK Times............................................................................A1-9

Using English/Western Europe Font on Non-compatible Operating System ....................... A1-9Chinese (Traditional) and Chinese (Simplified)...............................................................A1-12

Using Chinese Font on Non-compatible Operating System............................................... A1-12Korean.............................................................................................................................A1-14

Using Korean Font on Non-compatible Operating System ................................................ A1-14Central Europe/Cyrillic/Greek/Turkish.............................................................................A1-16

Using Central Europe/Cyrillic/Greek/Turkish Fonts on Non-compatible Operating System................................................................................................................. A1-16

HK Gothic and HK TimesOutline.............................................................................................................................A1-18Points of English/Western Europe HK Gothic/HK Times ................................................A1-20

Display Function Specifications ............................................................................................ A1-20Setting Procedure ...........................................................................................................A1-211. Font Type Setting........................................................................................................A1-222. Font Setting for Individual Functions...........................................................................A1-233. Manual Font Setting ....................................................................................................A1-25

Automatic Font Setting ......................................................................................................... A1-25Manual Font Setting.............................................................................................................. A1-25

4. Data Transfer to the V Series......................................................................................A1-27Notes on Font Data to be Transferred .................................................................................. A1-27

Error for the V series .......................................................................................................A1-28

Windows FontLimitations.......................................................................................................................A1-29Option .............................................................................................................................A1-30Setting Procedure ...........................................................................................................A1-31

In Text Properties Setting......................................................................................................A1-31In Message Editing................................................................................................................A1-32Font Registration...................................................................................................................A1-33

[Windows Font List] Window...........................................................................................A1-35Location of the Dialog ...........................................................................................................A1-35

Change All Windows Fonts.............................................................................................A1-36Procedure..............................................................................................................................A1-36

Windows Fonts for Language Selection .........................................................................A1-38Conditions for Language Selection Using Windows Fonts ...................................................A1-38Multi-Language Editing Using Windows Fonts......................................................................A1-38

Windows Font Not Installed on Your Computer Exists in Screen Data ..........................A1-39

Appendix 2 3D Parts64k- or 32k-color Type

Switch / Lamp ...................................................................................................................A2-1Available Parts ........................................................................................................................A2-1Setting Procedure ...................................................................................................................A2-3Flashing Function....................................................................................................................A2-8

Data Display/Graph/Calendar ...........................................................................................A2-9Available Parts ........................................................................................................................A2-9Setting Procedure ...................................................................................................................A2-9

Customizing ....................................................................................................................A2-14Notes.....................................................................................................................................A2-14Setting Procedure .................................................................................................................A2-15

128-color TypeSwitch / Lamp .................................................................................................................A2-17

Available Parts ......................................................................................................................A2-17Setting Procedure .................................................................................................................A2-19

NotesNotes on Dealing with 3D Parts ......................................................................................A2-24Memory Size ...................................................................................................................A2-24Limitation on Par