monthly notifications register - sutn · information procedure page 1 monthly notifications...

Information procedure

Monthly Notifications Register

Notifications registered at CCMC from 2012-07-01 to 2012-07-31

Register issued on : 2012-08-03

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A05: MAINTENANCE SERVICES

Subsector : A05 Registration Date : 2012-07-19Organization : UNICountry : ItalyProject ID : 49010680/0001 Project EstablishedICS : 01.040.03National Ref : U49010680Title : Maintenance - Additional terms and definitions to EN 13306Scope : This standard gives the most used terms in the maintenance field to be considered together

to those of EN 13306.

Relatedness :National : REV/AMD UNI 10147:2003

** End of Subsector **

Subsector A06: BUILDING AND CONSTRUCTION SERVICES

Subsector : A06 Registration Date : 2012-07-12Organization : SISCountry : Sweden Latest Date for Comments : 2012-08-13Project ID : 00822022/0001 Project EstablishedICS :National Ref : 822022Title : Sanitary appliances - Washbasins for wall brackets - Distance of bracketsScope : This standard differs in that it covers many different brackets of washbasins. There are

some variations in the bracket mounting position in this standard have put together for the common sizes. The standard must facilitate, for example, plumbers can install brackets according to the most common sizes and know that to all wash basins manufacturer specifies can be mounted on brackets

Relatedness :National : New


Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024915/0001 Project EstablishedICS : 03.080.20, 03.100.01National Ref : ÖNORM S 2502Title : Consulting service for Corporate Social ResponsibilityScope : This document lays down requirements and further recommendations for consulting

services on corporate social responsibility (CSR). It addresses both organisations irrespective of their type and size or the implementation level of social responsibility and (C)SR consultants irrespective of whether they are employees of the organisation or external persons.


Subsector : A99 Registration Date : 2012-07-19Organization : UNICountry : ItalyProject ID : 0910R010/0001 Project EstablishedICS : 93.080.20National Ref : E0910R010Title : Bitumen and bituminous binders - Polymer modified bituminous binders mainly used in

ItalyScope : This technical report is the application of point 5.2.1 of specifications EN 14023-2009 and

consists of the summary of most applied grade in Italy, according to local requirement for traffic and climatic condition in order to avoid unworkable combinations according to past experience of successful use.


Subsector : A99 Registration Date : 2012-07-27Organization : TSECountry : TurkeyProject ID : t1011827/0001 Project EstablishedICS : 03.080.10National Ref :Title : Work places - Providing maintenance and filling service for fire extinguishers - General

rules Scope : This standard includes general rules for management physical structure personnel

characteristics and technical equipments for provider maintenance and filling service for fire extinguishers.



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2012-07-24Organization : NSAI Draft Issue Date : 2012-07-24Country : Ireland Latest Date for Comments : 2012-08-24Project ID : 01078889/0001 Project EstablishedICS :National Ref : I.S. 291Title : Selection, commissioning, installation, inspection and maintenance of portable fire

extinguishersScope : This standard is a revision of I.S.291:2002. It applies to the installation and maintenance of

portable fire extinguishers.

Relatedness :National : REV/AMD I.S. 291

Subsector : B01 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 03100854/0001 Project EstablishedICS :National Ref : 03100854Title : Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 11: Equipment

chest for lifting bags


Subsector : B01 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 03100855/0001 Project EstablishedICS :National Ref : 03100855Title : Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 12: Unlocking

tool chest


Subsector : B01 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 03100856/0001 Project EstablishedICS :National Ref : 03100856Title : Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 13: Road

accident tool chest


Subsector : B01 Registration Date : 2012-07-13

Organization : DINCountry : GermanyProject ID : 03100857/0001 Project EstablishedICS :National Ref : 03100857Title : Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 14:

Consumption material chest


Subsector : B01 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001700/0001 Project EstablishedICS : 13.220.01, 13.220.20, 91.040.01National Ref : NEN 6059:2011 Concept nlTitle : Assessment of fire safety of buildings - Initial assessment of fire safety of buildingsScope : NPR 6059 is a tool in order to inspect existing building uniformly. Benchmarking of

buildings on the aspect of fire safety is possible. All fixed fire safety measures (e.g. fire compartment, sprinkler systems etc.) in a building are included in the fire safety scan. The fire safety scan is done in one day. The fire safety scan is limited to a visual check of the building and a check of all documents which prove the fire safety of the building. Calculations are not part of the first safety scan.


Subsector : B01 Registration Date : 2012-07-19Organization : UNICountry : ItalyProject ID : 70001710/0001 Project EstablishedICS : 13.220.20National Ref : U70001710Title : Fire fighting equipment - Hydrant systems - Design, installation and operationScope : This standard gives minimum requirements for design, installation and maintenance of

hydrant systems


Subsector : B01 Registration Date : 2012-07-27Organization : SUTNCountry : SlovakiaProject ID : 92201112/0001 Project EstablishedICS : 13.220.50, 29.060.20National Ref : STN 92 1101-3Title : Products for electrical distribution, control and communications for the purposes of fire

safety building. Part 3: Products for connecting cables and wiresScope : The task is to establish additional requirements for fire protection features products for

connecting cables and wiries for cable routes for the continuous supply of electricity in case of fire



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 00516432/0001 Project EstablishedICS :National Ref : 00516432Title : Masonry - Part 4: Prefabricated masonry compound units


Subsector : B02 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001693/0001 Project EstablishedICS : 65.040.30, 91.080.01National Ref : NEN 3859:2011 Concept nlTitle : Greenhouses: Design and construction - Commercial production greenhousesScope : This standard provides requirements for the strength, stiffness, stability and durability of

greenhouses. The greenhouses are meant for the commercial production of plants and crops independent of the material, including the foundation. This standard also describes the determination methods if the specifications are met.



Subsector B03: CONCRETE

Subsector : B03 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001772/0001 Project EstablishedICS : 91.100.30, 93.160National Ref : NEN 7024-1:2012 Concept nlTitle : Concrete slope-elements - General requirementsScope : This document contains general product properties for elements for block revetments

applicable to slopes and bricklaying. This standard gives also general requirements and determination methods included.


Subsector : B03 Registration Date : 2012-07-05

Organization : NENCountry : NetherlandsProject ID : 50001773/0001 Project EstablishedICS : 91.100.30, 93.160National Ref : NEN 7024-2:2012 Concept nlTitle : Elements of cement concrete for block revetments without interlockingScope : This document contains specific product properties for elements for block revetments

without interlocking applicable to slopes and bricklaying. This standard gives also specific requirements and corresponding determination methods.



Subsector B04: CEMENT

Subsector : B04 Registration Date : 2012-07-17Organization : MSZT Draft Issue Date : 2012-09-01Country : Hungary Latest Date for Comments : 2012-09-30Project ID : 10201205/0001 Project EstablishedICS :National Ref : MSZ 4737-1Title : Special cements. Part 1: Sulfate resisting cements

Relatedness :National : REV/AMD MSZ 4737-1:2002

Subsector : B04 Registration Date : 2012-07-31Organization : AENORCountry : SpainProject ID : P0040020/0001 Project EstablishedICS :National Ref : PNE 80303-1Title : Cements with additional characteristics. Part 1: Sulphate resisting cements.Scope : The standard defines and gives the specifications of 9 sulphate resisting common cements

and their constituents. These cements are listed in Annex A of EN 197-1.

Relatedness :National : REV/AMD UNE 80303-1:2011


Subsector B07: GLASS

Subsector : B07 Registration Date : 2012-07-19Organization : UNICountry : ItalyProject ID : 58003090/0001 Project EstablishedICS : 81.040.20National Ref : U58003090Title : Safety criteria for glazing applicationsScope : The standard provides the criteria for glazing applications to be used in exterior and

interior, so that the compliance for the expected use between performance of windows and

Scope : minimum requirements is assured for the safety of users.



Subsector B14: GEOTECHNICS

Subsector : B14 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024884/0001 Project EstablishedICS : 93.020National Ref : ONR 24406-2Title : Geotechnical engineering - Foundation assessment with regard to warfare material -

Part 2: Description of requirements for the competence of experts in the field of recovery of warfare material

Scope : Experts for the removal of warfare material according to ONR 24406-1 are to define whether or not warfare material might still be present in a specific area and to present their results accordingly. This ON-Rule describes requirements concerning their competence, i.e. education and training, skills and experience, necessary for being able to make definitions according to ONR 24406-1.



Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY

Subsector : B17 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001705/0001 Project EstablishedICS : 91.140.50National Ref : NPR 5310:2007+A3:2011 Concept nlTitle : Netherlands interpretation guide for NEN 1010Scope : Netherlands interpretation guide for NEN 1010


Subsector : B17 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001760/0001 Project EstablishedICS : 91.140.50National Ref : NPR 5310:2007+A4:2012 Concept nlTitle : Netherlands interpretation guide for NEN 1010Scope : Netherlands interpretation guide for NEN 1010



Subsector B20: DRAINAGE EQUIPMENT

Subsector : B20 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 11903057/0001 Project EstablishedICS :National Ref : 11903057Title : Sedimentation devices for installations for separation - Principles of design, function and

testing, marking and quality control, sizing, installation, operation and maintenance



Subsector B21: BATHS

Subsector : B21 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024834/0001 Project EstablishedICS : 13.060.01, 97.220.10National Ref : ÖNORM M 5879-2Title : Specifications for chlorination plants for water treatment ¿ Part 2: Equipment for

disinfection and oxidation with solutions of sodium hypochlorite Scope : This Austrian Standard specifies minimum requirements for facilities and equipment which

are used for disinfection and oxidation of drinking water, bathing water, process water and waste water with appropriate chlorine compounds in solved form. For basic facilites, as they must be used in case of an emergency water supply, this standard is limited applicable.



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001701/0001 Project EstablishedICS : 91.140.40National Ref : NPR 3378-0:2011 Concept nlTitle : Guidelines for gas installations - Part 0: GeneralScope : This code of practice gives indications and examples how to meet the regulations for gas

installations according NEN 1078 (GAVO - 1987, part).


Subsector : B25 Registration Date : 2012-07-05Organization : NENCountry : Netherlands

Project ID : 50001702/0001 Project EstablishedICS : 91.140.40National Ref : NPR 3378-40:2011 Concept nlTitle : Guidelines for NEN 1078 - Part 40: Combustion of Airsupply and combustion gas flueScope : In this code of practice a determination method is described for the designations of

combustion of airsupply and combustion gas flue


Subsector : B25 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001703/0001 Project EstablishedICS : 91.140.40National Ref : NPR 3378-41:2011 Concept nlTitle : Guidelines for NEN 1078 - Part 41: Common flue system (semi CLV system)Scope : In this part a method for the determination of the designations of a common flue system

(semi CLV system) is described


Subsector : B25 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001774/0001 Project EstablishedICS : 23.060.40, 91.140.40National Ref : NEN 7244-10:2010/A1:2012 Concept nlTitle : Gas supply systems - Pipelines for maximum operating pressure up to and including 16

bar - Part 10: Specific functional requirements for housing for installations and housing for meters with a maximum inlet pressure of 100 mbar and a maximum design capacity of 650 mn3/h

Scope : This document is an amendment to NEN 7244-10:2010.


Subsector : B25 Registration Date : 2012-07-31Organization : AENORCountry : SpainProject ID : P0039969/0001 Project EstablishedICS :National Ref : PNE 60720Title : Stainless steel flexible hoses for conveying propane in liquid or gaseous phase with a

maximum operation pressure (MOP) up to 20 bar.Scope : This standard is to establish the size, composition and characteristics of non-extensible

corrugated stainless steel hoses aimed to convey propane whatever its phase is (liquid or gas) between containers of propane, between them and their facilities and for unloading and transferring from the means of transport (ship, truck, train, etc..) to the storage center. This standard applies to flexible hoses of DN12 to DN150 foreseen for a maximum operating pressure (MOP) not exceeding 20 bar, corresponding to the maximum vapour pressure of commercial propane at 50 ° C.

Relatedness :National : REV/AMD UNE 60720:2009


Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2012-07-06Organization : SUTNCountry : SlovakiaProject ID : 73207212/0001 Project EstablishedICS :National Ref : STN 73 6242/Z1Title : Pavements on road bridges. Design and material specificationsScope : Admendment Z1 of STN 73 6242 results from experience and use of the published revised

STN 73 6242. 2010. Scope is modification of some requirements for the bridge deck layers.

Relatedness :National : REV/AMD STN 73 6242

Subsector : B26 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039676/0001 Project EstablishedICS :National Ref : PNE 127339Title : Requirements and delivery and reception conditions of concrete paving flags.Scope : This Standard specifies, together with UNE-EN 1339, the properties, requirements, test

methods and delivery and acceptance conditions for cement bound unreinforced concrete paving flags and complementary fittings that are for use in trafficked paved areas and roof coverings.



Subsector B31: HEATING SYSTEMS IN BUILDINGS

Subsector : B31 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001696/0001 Project EstablishedICS : 91.060.40, 91.140.30National Ref : NEN 2757-1:2011 Concept nlTitle : Determination methods of the suitability of systems for smoke exhaust in building

related combustion installations - Part 1: Installations with a gross heat input below or equal to 130 kW

Scope : This standard gives methods to determine which devices the capacity of the smoke outlet is suitable; the suitability of the capacity of the smoke outlet of a certain device on a certain position.



Subsector B32: PRECAST CONCRETE PRODUCTS

Subsector : B32 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039677/0001 Project EstablishedICS :National Ref : PNE 127748-1Title : Terrazzo tiles. Part 1: Terrazzo tiles for internal use. National complement to the

standard UNE-EN 13748-1.Scope : This Standard specifies, together with UNE-EN 13748-1, the properties, requirements and

test methods for unreinforced cement-bound terrazzo tiles which are factory made and sold ready to be placed. Terrazzo tiles are intended for internal use.

Relatedness :National : REV/AMD UNE 127748-1:2006, UNE 127748-1:2006 ERRATUM:2008

Subsector : B32 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039678/0001 Project EstablishedICS :National Ref : PNE 127748-2Title : Terrazzo tiles. Part 2: Terrazzo tiles for external use. National complement to the

standard UNE-EN 13748-2.Scope : This Standard specifies, together with UNE-EN 13748-2, the properties, requirements and

test methods for unreinforced cement-bound terrazzo tiles which are factory made and sold ready to be placed. The terrazzo tiles are intended for external use (including their application on roof coverings) on pedestrian areas, such as promenades, terraces, shopping centres, swimming pools, etc., where the decorative aspect of pavement is relevant.



Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2012-07-02Organization : SFS Draft Issue Date : 2012-06-20Country : Finland Latest Date for Comments : 2012-09-15Project ID : 0000E285/0001 Draft for public enquiryICS :National Ref :Title : Characteristics and requirement levels of slow heat release appliances, roomheaters,

residential cookers and insert appliances fired by solid fuels in different applications

Relatedness :National : REV/AMD SFS 7021:2010

Subsector : B99 Registration Date : 2012-07-02Organization : SFS Draft Issue Date : 2012-06-20Country : Finland Latest Date for Comments : 2012-09-15Project ID : 0000E286/0001 Draft for public enquiryICS :National Ref :Title : Characteristics and requirement levels of metal chimney systems in different

applications


Subsector : B99 Registration Date : 2012-07-02Organization : SFS Draft Issue Date : 2012-06-20Country : Finland Latest Date for Comments : 2012-09-15Project ID : 0000E287/0001 Draft for public enquiryICS :National Ref :Title : Characteristics and requirement levels of metal liners and connecting flue pipes in

different applications


Subsector : B99 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024814/0001 Project EstablishedICS : 03.100.01National Ref : ÖNORM A 7010-5Title : Object management - Data structures - Part 5: Property Book for sharing of use and

operational oriented informationScope : The property book is based on the structure of the ÖNORM B 1801 and ÖNORM A 7010

and is a common coordinated information structure for all objects after new construction or new version of data. The property book contains use and operation-oriented metadata, tables, plans, notices, instructions, contracts, cost systems and strategic information.


Subsector : B99 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001695/0001 Project EstablishedICS : 91.140.10National Ref : NEN 3028:2011 Concept nlTitle : Requirements for fuel combustion installationsScope : This standard gives specifications for the design, installation and mounting of combustion

installations for industrial and constructional applications hetated with oil or gaseous or solid fuels.


Subsector : B99 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001697/0001 Project EstablishedICS : 13.030.10, 13.080.10National Ref : NEN 6970:2008/A1:2011 nlTitle : Umbrella standard for the determination of organic components in soil, water soils and

building material (soil)Scope : This umbrellastandard describes the possibilities of preparation/extraction,

isolation/cleanup and analysis techniques for the determination of the content of organic components in soil, sediment and building materials.


Subsector : B99 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001698/0001 Project EstablishedICS : 13.030.10, 13.080.10National Ref : NEN 6975:2008/A1:2011 nlTitle : Soil quality - Isolation and cleanup with Florisil for the determination of organic

componentsScope : This standard describes a method for the isolation and cleanup sample extract with florisil

for the determination of organic parameters.


Subsector : B99 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001699/0001 Project EstablishedICS : 13.030.10, 13.080.10National Ref : NEN 6978:2008/A1:2011 nlTitle : Soil quality - Quantitative determination of the content of mineral oil by using gas

chromatographyScope : This standard describes a method for the quantitative determination of the content of

mineral oil in soil, sediment and building materials.


Subsector : B99 (Secondary Subsector)

Registration Date : 2012-07-05

Organization : NENCountry : NetherlandsProject ID : 50001705/0001 Project EstablishedICS : 91.140.50National Ref : NPR 5310:2007+A3:2011 Concept nlTitle : Netherlands interpretation guide for NEN 1010

Scope : Netherlands interpretation guide for NEN 1010


Subsector : B99 (Secondary Subsector)

Registration Date : 2012-07-05

Organization : NENCountry : NetherlandsProject ID : 50001760/0001 Project EstablishedICS : 91.140.50National Ref : NPR 5310:2007+A4:2012 Concept nlTitle : Netherlands interpretation guide for NEN 1010Scope : Netherlands interpretation guide for NEN 1010


Subsector : B99 Registration Date : 2012-07-19Organization : UNICountry : ItalyProject ID : 84000980/0001 Project EstablishedICS : 01.040.79National Ref : U84000980Title : Cultural heritage - Wooden artefacts - Historic doors and windows - Terms and

definitions of the constituent elementsScope : The proposed standard aims to provide a unified terminology of the parts of pre-industrial

historic windows and doors, including the terms of the handling and clamping systems made of materials other than wood.


Subsector : B99 Registration Date : 2012-07-19Organization : UNICountry : ItalyProject ID : 87006380/0001 Project EstablishedICS : 91.100.01National Ref : U87006380Title : Photocatalysis - Determination of photocatalytic activity by the tangential continuous

flow method - Nitric Oxide abatementScope : This standard describes the method of determining the ability of inorganic materials

dispersed either in cementitious mortars - and/or lime -, ceramic matrices, paints or deposited as thin films or coverings onto different substrates to remove Nitrogen Monoxide NO from a gas stream by photocatalytic action. The photocatalytic NO abatement ability of the materials investigated is assessed by measuring the degradation rate. The degradation rate as measured allows determining the photocatalytic abatement rate under test conditions, subtracting the effects induced by mass transfer limitations. The degradation rate is a peculiar property of the material under test.



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2012-07-16Organization : TSECountry : TurkeyProject ID : tst08317/0001 Project EstablishedICS : 67.220.20National Ref :Title : Gelatin-Food GradeScope : This standard covers the gelatin used in food industry. This standard does not cover the

gelatin used in food and other industries.


Subsector : C01 Registration Date : 2012-07-16Organization : TSECountry : TurkeyProject ID : tst09496/0001 Project EstablishedICS : 67.080.20National Ref :Title : Frozen Green BeansScope : This standard applies to frozen green beans.


Subsector : C01 Registration Date : 2012-07-16Organization : TSECountry : TurkeyProject ID : tst10934/0001 Project EstablishedICS : 67.080.20National Ref :Title : Frozen OkrasScope : This standard covers the frozen okras


Subsector : C01 Registration Date : 2012-07-16Organization : TSECountry : TurkeyProject ID : tst11149/0001 Project EstablishedICS : 67.160.20National Ref :Title : Turnip JuiceScope : This standard specifies turnip juice.


Subsector : C01 Registration Date : 2012-07-16

Organization : TSECountry : TurkeyProject ID : tst11166/0001 Project EstablishedICS : 67.080.20National Ref :Title : Frozen RedbeansScope : This standard covers the frozen redbeans


Subsector : C01 Registration Date : 2012-07-16Organization : TSECountry : TurkeyProject ID : tst11241/0001 Project EstablishedICS : 67.080.20National Ref :Title : Frozen Mixed VegetablesScope : This standard applies to the frozen mixed vegetables.


Subsector : C01 Registration Date : 2012-07-16Organization : TSECountry : TurkeyProject ID : tst12230/0001 Project EstablishedICS : 67.060National Ref :Title : Puff DoughScope : This standard specifies therequirements for puff dough. It does not cover other ready-to-

use doughs.


Subsector : C01 Registration Date : 2012-07-16Organization : TSECountry : TurkeyProject ID : tst12980/0001 Project EstablishedICS : 67.060National Ref :Title : Mantı-FrozenScope : This standards cover mantı. It Doesn't cover fresh mantı or baked mantı



Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039809/0001 Project EstablishedICS :National Ref : PNE 84072Title : Cosmetic raw materials. Ethyl alcohol. Determination of alcoholic strength.

Alcoholometric method.Scope : This standard determines the method of ethyl alcohol in hydroalcoholic mixtures.


Subsector : C03 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039810/0001 Project EstablishedICS :National Ref : PNE 84070Title : Cosmetic raw materials. Ethanol.Scope : This standard sets the general characteristics and specifies the assay methods

corresponding to ethanol used as a raw material in cosmetic formulations. This standard is applicable to ethanol without any kind of denaturant.


Subsector : C03 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039822/0001 Project EstablishedICS :National Ref : PNE 84648Title : Cosmetic raw materials. Sunscreens. Ethylhexyl Salicylate.Scope : This standard includes the specifications required by the Ethylhexyl Salicylate, in cosmetic

uses.


Subsector : C03 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039864/0001 Project EstablishedICS :National Ref : PNE 84638Title : Cosmetic raw materials. Isopropyl isostearate.Scope : This standard includes the specifications required by the Isopropyl isostearate in cosmetic

uses.



Subsector C13: FERTILIZERS

Subsector : C13 Registration Date : 2012-07-18Organization : AENORCountry : Spain Latest Date for Comments : 2012-08-26Project ID : P0038118/0002 Draft for public enquiryICS :National Ref : PNE 142404-1Title : Fertilizers. Requirements for labelling. Part 1: Labelling of simple solid inorganic

fertilizers with primary nutrient elements.Scope : This UNE standard specifies requirements for the labelling of solid inorganic or simple

mineral fertilizers with primary nutrient elements according to European Regulation.



Subsector C21: COSMETICS

Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039819/0001 Project EstablishedICS :National Ref : PNE 84686Title : Cosmetic raw materials. Sunscreens. 3-(4-Methylbenzylidene) camphor.Scope : This standard includes the specifications required by the 3-(4-Methylbenzylidene) camphor,

in cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039820/0001 Project EstablishedICS :National Ref : PNE 84636Title : Cosmetic raw materials. Sunscreens. 2-Hidroxy-4-methoxy fenone (oxibenzone).Scope : This standard includes the specifications required by the 2-Hydroxy-4-methoxy fenone

(Oxibenzone) in cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039821/0001 Project EstablishedICS :National Ref : PNE 84687Title : Cosmetic raw materials. Sunscreens. 3,3,5-Trimethylcyclohexyl salicylate (Homosalate).

Scope : This standard includes the specifications required by the 3.3.5-Trimethylcyclohexyl salicylate (Homosalate), in cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039823/0001 Project EstablishedICS :National Ref : PNE 84647Title : Cosmetic raw materials. Sunscreens. Octocrylene.Scope : This standard includes the specifications required by the Octocrylene, in cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039824/0001 Project EstablishedICS :National Ref : PNE 84612Title : Cosmetic raw materials. Sunscreens. Octyl methoxycinnamate.Scope : This standard includes the specifications required by the Octyl methoxycinnamate, in

cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039852/0001 Project EstablishedICS :National Ref : PNE 84134Title : Cosmetic raw materials. Caprylic-capric triglyceride.Scope : This standard includes the specifications required by the Caprylic-capric triglyceride in

cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039853/0001 Project EstablishedICS :National Ref : PNE 84639Title : Cosmetic raw materials. Cetearyl isononanoate.

Scope : This standard includes the specifications required by the Cetearyl isononanoate in cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039854/0001 Project EstablishedICS :National Ref : PNE 84122Title : Cosmetic raw materials. Determination of free amidoamine in alkylamidobetaines.Scope : This standard includes the determination of free amidoamine in alkylamidobetaines.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039855/0001 Project EstablishedICS :National Ref : PNE 84140Title : Cosmetic raw materials. Alkyl betaine.Scope : This standard includes the specifications required by the alkyl betaine in cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039856/0001 Project EstablishedICS :National Ref : PNE 84141Title : Cosmetic raw materials. Alkylamidopropyl betaine.Scope : This standard includes the specifications required by the Alkylamidopropyl betaine in

cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039857/0001 Project EstablishedICS :National Ref : PNE 84092Title : Cosmetic raw materials. Polyethylenglycol-20 stearate.Scope : This standard includes the specifications required by the Polyethylenglycol-20 stearate in

Scope : cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039862/0001 Project EstablishedICS :National Ref : PNE 84772Title : Cosmetic raw materials. Plant extracts. Hydroglycolic extract sage (Salvia officinalis

L.)Scope : This standard includes the specifications required by the Hydroglycolic extract sage in

cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039863/0001 Project EstablishedICS :National Ref : PNE 84773Title : Cosmetic raw materials. Plant extracts. Hydroglycolic extract peach (Prunus persica L.)Scope : This standard includes the specifications required by the Hydroglycolic extract peach in

cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039865/0001 Project EstablishedICS :National Ref : PNE 84610Title : Cosmetic raw materials. Isostearyl isostearate.Scope : This standard includes the specifications required by the Isostearyl isostearate in cosmetic

uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039866/0001 Project EstablishedICS :National Ref : PNE 84613

Title : Cosmetic raw materials. Myristyl lactate.Scope : This standard includes the specifications required by the Myristyl lactate in cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039867/0001 Project EstablishedICS :National Ref : PNE 84701Title : Cosmetic raw materials. Toothpastes. Sodium monofluorphosphate.Scope : This standard includes the specifications required by the SODIUM

MONOFLUORPHOSPHATE in cosmetic uses.

Relatedness :National : REV/AMD UNE 84701:2005, UNE 84701:2005 ERRATUM:2006

Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039868/0001 Project EstablishedICS :National Ref : PNE 84700Title : Cosmetic raw materials. Toothpastes. Sodium fluoride.Scope : This standard includes the specifications required by the Sodium fluoride in cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039869/0001 Project EstablishedICS :National Ref : PNE 84702Title : Cosmetic raw materials. Toothpastes. Determination of fluoride ion in sodium fluoride

and sodium monofluorophosphate.Scope : This standard includes the determination of fluorine content of sodium fluoride and

sodium phosphate monoflúor



Title : Cosmetic raw materials. Toothpastes. Sodium tripolyphosphate.Scope : This standard includes the specifications required by the Sodium tripolyphosphate used in

dentifrices.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039872/0001 Project EstablishedICS :National Ref : PNE 84611Title : Cosmetic raw materials. Cetyl lactate.Scope : This standard includes the specifications required by the Cetyl lactate in cosmetic uses.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039873/0001 Project EstablishedICS :National Ref : PNE 84722Title : Cosmetic raw materials. Toothpastes. Sodium hexametaphosphate.Scope : This standard includes the specifications required by the Sodium hexametaphosphate used

in dentifrices.


Subsector : C21 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039874/0001 Project EstablishedICS :National Ref : PNE 84721Title : Cosmetic raw materials. Toothpastes. Sodium acid pyrophosphate.Scope : This standard includes the specifications required by thetetrasodium pyrophosphate, used

in dentifrices.



Title : Cosmetic raw materials. Toothpastes. Tetrasodium pyrophosphate.Scope : This standard includes the specifications required by the tetrasodium pyrophosphate, used

in dentifrices.



Subsector C99: UNDETERMINED

Subsector : C99 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024836/0001 Project EstablishedICS : 95.020National Ref : ONR 191390Title : Rimfire cartridgesScope : This ONR sets the maximum dimensions for cartridges and the minimum dimensions of

chambers as well as the maximum allowable gas pressure respectively the maximum allowable energy for the cartridges, which are to keep in the production of weapons and ammunition. The adherence to these values is monitored during the cartridge testing and the ballistic testing of the weapons.


Subsector : C99 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024855/0001 Project EstablishedICS : 95.020National Ref : ONR 191391Title : Revolver and pistol cartridgesScope : This ONR sets the maximum dimensions for cartridges and the small dimensions of the

chambers as well as the maximum allowable gas pressure for the cartridges, which are to keep in the production of weapons and ammunition. The adherence to these values is monitored during the cartridge testing and the ballistic testing of the weapons.


Subsector : C99 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024857/0001 Project EstablishedICS : 95.020National Ref : ONR 191392-1Title : Rimless cartridges - Part 1: Metric calibresScope : This ONR sets the maximum dimensions for cartridges and the small dimensions of the



Subsector : C99 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024858/0001 Project EstablishedICS : 95.020National Ref : ONR 191392-2Title : Rimless cartridges - Part 2: Calibres in inchesScope : This ONR sets the maximum dimensions for cartridges and the small dimensions of the



Subsector : C99 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024859/0001 Project EstablishedICS : 95.020National Ref : ONR 191393-1Title : Rimmed cartridges - Part 1: Metric calibresScope : This ONR sets the maximum dimensions for cartridges and the small dimensions of the



Subsector : C99 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024877/0001 Project EstablishedICS : 95.020National Ref : ONR 191393-2Title : Rimmed cartridges - Part 2: Calibres in inchesScope : This ONR sets the maximum dimensions for cartridges and the small dimensions of the



Subsector : C99 Registration Date : 2012-07-12Organization : ASI

Country : AustriaProject ID : 00024878/0001 Project EstablishedICS : 95.020National Ref : ONR 191394Title : Magnum cartridgesScope : This ONR sets the maximum dimensions for cartridges and the small dimensions of the



Subsector : C99 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024879/0001 Project EstablishedICS : 95.020National Ref : ONR 191395Title : Shotgun cartridgesScope : This ONR sets the dimensions for cartridges and chambers, its tolerances as well as the

maximum allowable gas pressure for the cartridges, which are to keep in the production of weapons and ammunition. The adherence to these values is monitored during the cartridge testing and the ballistic testing of the weapons.


Subsector : C99 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024880/0001 Project EstablishedICS : 95.020National Ref : ONR 191396Title : Cartridges for firing devicesScope : This ONR sets the maximum dimensions for cartridges and the minimum dimensions of

chambers as well as the maximum allowable gas pressure respectively the maximum allowable energy for the cartridges, which are to keep in the production of weapons and ammunition. The adherence to these values is monitored during the cartridge testing and the ballistic testing of the weapons.


Subsector : C99 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024882/0001 Project EstablishedICS : 95.020National Ref : ONR 191397Title : Cartridges for alarmweaponsScope : This ONR sets the maximum dimensions for cartridges and the minimum dimensions of

Scope : chambers as well as the maximum allowable gas pressure respectively the maximum allowable energy for the cartridges, which are to keep in the production of weapons and ammunition. The adherence to these values is monitored during the cartridge testing and the ballistic testing of the weapons.


Subsector : C99 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024954/0001 Project EstablishedICS : 95.020National Ref : ONR 191399Title : Special cartridgesScope : This ONR sets the dimensions for cartridges and chambers, its tolerances as well as the

maximum allowable gas pressure for the cartridges, which are to keep in the production of weapons and ammunition. The adherence to these values is monitored during the cartridge testing and the ballistic testing of the weapons.



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F07: DOCUMENTATION AND INFORMATION

Subsector : F07 Registration Date : 2012-07-16Organization : MSZTCountry : HungaryProject ID : 00348001/0001 Project EstablishedICS : 01.080National Ref : MSZ 1699:2012Title : Hungarian National Standard Mark

Relatedness :National : REV/AMD MSZ 1699:1985

Subsector : F07 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001770/0001 Project EstablishedICS : 35.020National Ref : NTA 9040-1:2012 nlTitle : Company files - Part 1: Compliance assistanceScope : This national technical agreement deals with business records. This is a part concerning

compliance assistance


Subsector : F07 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001771/0001 Project EstablishedICS : 35.020National Ref : NTA 9040-2:2012 nlTitle : Company files - Part 2: License application and reportingScope : The purpose of this technical agreement is the description and consistent establishment of

the linking between applications of the authorized bodies and the business records.



Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2012-07-19Organization : UNICountry : ItalyProject ID : 14C81051/0001 Project EstablishedICS : 35.100.70National Ref : E14C81051Title : Road traffic and transport telematic - Automatic dynamic debiting systems and

automatic access control systems using dedicated short-range communication at 5,8 GHz - Part 1: Physical Layer

Scope : The standards UNI 10607-1, UNI 10607-2, UNI 10607-3 and UNI 10607-4 form together a

Scope : three-layered architecture for DSRC as used for EFC. This part of UNI 10607: - specifies a physical layer at 5,8 GHz, - provides requirements for the communication medium to be used for exchange of information between RSUs and OBUs, - sets foundations for the integration of protocol stacks based on this standard using the same formalisms as in UNI EN 12253:2005.

Relatedness :National : REV/AMD UNI 10607-1:2007

Subsector : F12 Registration Date : 2012-07-19Organization : UNICountry : ItalyProject ID : 14C81052/0001 Project EstablishedICS : 35.100.70National Ref : E14C81052Title : Road traffic and transport telematics - Automatic dynamic debiting systems and

automatic access control systems using dedicated short-range communication at 5,8 GHz - Part 2: Data Link Layer

Scope : The standards UNI 10607-1, UNI 10607-2, UNI 10607-3 and UNI 10607-4 form together a three-layered architecture for DSRC as used for EFC. This part of UNI 10607: • defines the Data Link Layer, • is positioned with respect to other related standards by the layers defined in OSI Basic Reference Model [ISO/IEC 7498-1] as adopted for EFC, • supports broadcast and half-duplex transmission modes, • takes into account that the mobile equipment communicates with the fixed equipment while passing through a limited communication zone • supports a variety of fixed equipment configurations. It supports configurations where usually one fixed equipment communicates with one mobile equipment, as well as handles exceptional situations where one fixed equipment can communicate with several mobile equipments, • defines data flow control procedures, • defines error control procedures, • defines unacknowledged connectionless services based on [ISO/IEC 8802-2] and provided to the application layer.



automatic access control systems using dedicated short-range communication at 5,8 GHz - Part 3: Application Layer Service Elements

Scope : The standards UNI 10607-1, UNI 10607-2, UNI 10607-3 and UNI 10607-4 form together a three-layered architecture for DSRC as used for EFC. This part of UNI 10607: defines the common Application Service Elements (ASE) that are used by Application

Scope : Service Objects (ASOs) for Application Processes in the EFC. This Part uses services provided by the Data Link Layer, [UNI10607-2], and covers all needed functionalities of intermediate layers of the OSI Basic Reference Model [ISO/IEC 7498-1], as these layers are not present in DSRC standards.



automatic access control systems using dedicated short-range communication at 5.8 GHz - Part 4: The Electronic Fee Collection Service Object

Scope : The standards UNI 10607-1, UNI 10607-2, UNI 10607-3 and UNI 10607-4 form together a three-layered architecture for DSRC as used for EFC. This part of UNI 10607: specifies the EFC Application Services Object which provides functions for Application Processes in the field of EFC. This Standard uses services provided by the Data Link Layer, UNI10607-2 and includes and references services defined in the EFC Application Layer, [UNI10607-3].



automatic access control systems using dedicated short-range communication at 5,8 GHz - Interoperability application profile for EETS

Scope : The standards UNI10607-1, UNI10607-2, UNI10607-3 and UNI10607-4 form together a three-layered architecture for DSRC as used for EFC. This standard defines an application profile based on the four parts of the UNI 10607 norm to be used for tolling systems compatible with those based on the UNI EN 15509 profile. This standard defines additionally the algorithms and the security procedures to be used for implementing secure payment transactions.



Subsector F19: OPTICS

Subsector : F19 Registration Date : 2012-07-13Organization : DINCountry : Germany

Project ID : 02500744/0001 Project EstablishedICS :National Ref : 02500744Title : Retro-reflecting materials for traffic safety - Photometric minimum requirements for retro-

reflective sheetings; Amendment 1



Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024914/0001 Project EstablishedICS : 03.100.01, 03.120.10National Ref : ÖNORM A 9009Title : Processes in management systems - Guidelines and requirementsScope : This Austrian Standard provides generic guidelines and requirements for processes in

management systems and is applicable for every organisation regardless of its nature, size and type of products and services this organisation provides. This Austrian Standard adresses the lifecycle and maturity of processes, their functions, system elements and interfaces as well as the interactions between processes and the interactions between a process and the management system. This Austrian Standard also covers the competence profil, responsibilities and authorities of persons acting in processes.



Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 06233983/0001 Project EstablishedICS :National Ref : 06233983Title : Optical atomic spectral analysis - Principles and definitions



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Subsector H04: SPORTS EQUIPMENT

Subsector : H04 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024894/0001 Project EstablishedICS : 97.220.20National Ref : ÖNORM ISO 11088Title : Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) systemScope : This International Standard specifies a method for the installation, adjustment and testing

of the Skibindungsmechanik, which are integrated in a practical manner the requirements of international standards for skis, boots and bindings. It is aimed at all individuals and institutions that deal with the above procedure. In particular, they aimed at the sports retail market. It applies to a functional unit ski-shoe-binding (SBS) for alpine skiing, is one of the at least one element of the user equipment.


Subsector : H04 Registration Date : 2012-07-16Organization : MSZT Draft Issue Date : 2012-08-01Country : Hungary Latest Date for Comments : 2012-09-01Project ID : 34891401/0001 Project EstablishedICS : 97.220.10National Ref : MSZ 15236Title : Treatment of water of swimming pools and baths. Filtrations



Subsector H33: FOOTWEAR (EXCLUDING PROTECTIVE FOOTWEAR)

Subsector : H33 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039671/0001 Project EstablishedICS :National Ref : PNE 59511-1Title : Footwear. Materials for uppers, lining and insocks. Determination of heavy metals

content extractable by acid perspiration solution in textile materials for footwear. Part 1: Determination of Cd, Ni, Cr, Co, Pb, Sb and Cu.

Scope : This Standard specifies a test method for the determination of heavy metals (Cd, Ni, Cr, Co, Pb, Sb and Cu) extractable by simulated acid perspiration solution in textile materials.


Subsector : H33 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039672/0001 Project EstablishedICS :

National Ref : PNE 59511-2Title : Footwear. Materials for uppers, lining and insocks. Determination of heavy metals

content extractable by acid perspiration solution in textile materials for footwear. Part 2: Determination of As and Hg.

Scope : This Standard specifies a test method for the determination of heavy metals (As and Hg) extractable by simulated acid perspiration solution in textile materials.


Subsector : H33 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039673/0001 Project EstablishedICS :National Ref : PNE 59950Title : Footwear. Specifications for the content in chemical substances and elements of

footwear and footwear components.Scope : This Standard is aimed at establishing the requirements and methods for testing the

chemical properties that footwear must have in order to ensure its suitable performance, provided that it is used in accordance with its intended use.


Subsector : H33 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039674/0001 Project EstablishedICS :National Ref : PNE 59700Title : Footwear material. Coated fabrics. Requirements and test methodsScope : This standard describes the requirements and the test methods of the coated fabrics to be

used as footwear material



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I04: ROLLING BEARINGS

Subsector : I04 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 11800384/0001 Project EstablishedICS :National Ref : 11800384Title : Rolling bearings - Rolling bearing tolerances - Part 4: Radial internal clearance



Subsector I08: AGRICULTURAL MACHINES

Subsector : I08 Registration Date : 2012-07-16Organization : TSECountry : TurkeyProject ID : tst00368/0001 Project EstablishedICS : 65.060.20National Ref :Title : Agricultural, Machinery DiscsScope : This standard applies to discs to be used in agricultural machinery



Subsector I14: GEARS

Subsector : I14 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 06003136/0001 Project EstablishedICS : 01.040.21National Ref : DIN 3975-1Title : Definitions and parameters on cylindrical worm gear pairs with rectangular crossing

shafts - Part 1: Worm and worm wheel


Subsector : I14 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 06003137/0001 Project EstablishedICS : 01.040.21National Ref : DIN 3975-2Title : Definitions and parameters on cylindrical worm gear pairs with rectangular crossing

shafts - Part 2: Deviations



Subsector I28: FLUID POWER

Subsector : I28 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 06233986/0001 Project EstablishedICS :National Ref : 06233986Title : Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils; Minimum requirements,

Amendment 1


Subsector : I28 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 06233987/0001 Project EstablishedICS :National Ref : 06233987Title : Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils; Minimum requirements,

Amendment 1


Subsector : I28 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 06233988/0001 Project EstablishedICS :National Ref : 06233988Title : Pressure fluids - Hydraulic oils - Part 3: HVLP hydraulic oils; Minimum requirements,

Amendment 1



Subsector I30: AIR DISTRIBUTION

Subsector : I30 Registration Date : 2012-07-18Organization : AENORCountry : Spain Latest Date for Comments : 2012-08-26Project ID : P0038875/0002 Draft for public enquiryICS :National Ref : PNE 100716Title : Measurement and quantification of the outer surface of the air ducts of rectangular sheet

metalScope : This standard establishes a method for measuring the surface to quantify the unit of

Scope : measurement to be used in air duct sheet metal, also including parts. As the total surface is to be understood through the outer surface of the finished surface more specific cross joints. This standard is applicable to rectangular ducts and their components, used in ventilation and air conditioning. This standard is intended to fill the gap in the existing standards taking into account the current manufacturing methods, collecting the measurement criteria used in the Spanish market in recent decades. Not subject to this standard definition of the inner dimensions of pipes, such treaties in the UNE-EN 1505. Nor is the subject of this standard the determination of leakage air flow per unit area of the ducts (sealing factor), being necessary to use the UNE-EN 14239.



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M01: STEEL

Subsector : M01 Registration Date : 2012-07-06Organization : ISSCountry : Serbia Latest Date for Comments : 2012-08-03Project ID : 00038069/0001 Draft for public enquiryICS : 03.120.30National Ref : SRPS C.A1.091Title : Standard Practice for Dealing With Outlying ObservationsScope : This practice covers outlying observations in samples and how to test the statistical

significance of them. An outlying observation, or outlier, is one that appears to deviate markedly from other members of the sample in which it occurs. In this connection, the following two alternatives are of interest: (i) an outlying observation may be merely an extreme manifestation of the random variability inherent in the data. If this is true, the value should be retained and processed in the same manner as the other observations in the sample. (ii) An outlying observation may be the result of gross deviation from prescribed experimental procedure or an error in calculating or recording the numerical value. In such cases, it may be desirable to institute an investigation to ascertain the reason for the aberrant value. The observation may even actually be rejected as a result of the investigation, though not necessarily so. At any rate, in subsequent data analysis, the outlier or outliers will be recognized as probably being from a different population than that of the other sample values. Recommended criteria and illustrations for single samples including the Dixon criteria which are based entirely on ratios of differences between the observations, criterion using independent standard deviation, and criterion for known standard deviation are presented.

Relatedness :National : NewInternational : Identical to ASTM 178-08

Subsector : M01 Registration Date : 2012-07-06Organization : ISSCountry : Serbia Latest Date for Comments : 2012-08-03Project ID : 00038070/0001 Draft for public enquiryICS : 77.140.80National Ref : SRPS C.A1.092Title : Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels

and Cast IronsScope : This test method covers the X-ray emission spectrometric analysis of low-alloy steels and

cast irons for the following elements in the ranges indicated: manganese 0.20 to 1.50 %; nickel 0.10 to 1.00 %; chromium 0.10 to 1.00 %; molybdenum 0.04 to 0.40 %; copper 0.05 to 0.30 %; vanadium 0.03 to 0.25 % .NOTE 1-These concentration ranges can be extended by the use of suitable standards. The detection limit for the elements is lower than the listed value. The ranges represent the actual levels at which this test method was tested.

Relatedness :National : NewInternational : Identical to ASTM E 322-96

Subsector : M01 Registration Date : 2012-07-06Organization : ISSCountry : Serbia Latest Date for Comments : 2012-08-03Project ID : 00038071/0001 Draft for public enquiryICS : 77.140.20National Ref : SRPS C.A1.093

Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence

Title : SpectrometryScope : This test method covers the analysis of stainless and alloy steels by wavelength dispersive X-

ray Fluorescence Spectrometry for the determination of the following elements: Chromium 2.0 to 25.0 %; Cobalt 0.03 to 0.40 %; Copper 0.05 to 3.50 %; Manganese 0.3 to 5.0 %; Molybdenum 0.15 to 3.5 %; Nickel 0.20 to 35.0 %; Niobium 0.05 to 1.3 %; Phosphorus 0.01 to 0.03 %; Silicon 0.05 to 0.20 %; Sulfur 0.02 to 0.30 %; Titanium 0.002 to 0.04 %; Vanadium 0.03 to 0.25 %. NOTE 1—Unless exceptions are noted, concentration ranges can be extended by the use of suitable reference materials

Relatedness :National : NewInternational : Identical to ASTM E 572-02a

Subsector : M01 Registration Date : 2012-07-06Organization : ISSCountry : Serbia Latest Date for Comments : 2012-08-03Project ID : 00038073/0001 Draft for public enquiryICS : 77.040.30National Ref : SRPS C.A1.094Title : Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence

SpectrometryScope : This test method covers the wavelength dispersive X-ray fluorescence analysis of low-alloy

steels for the following elements: Calcium 0.001 to 0.007 %; Chromium 0.04 to 2.5 %; Cobalt 0.03 to 0.2 %; Copper 0.03 to 0.6 %; Manganese 0.04 to 2.5 %; Molybdenum 0.005 to 1.5 %; Nickel 0.04 to 3.0 %; Niobium 0.002 to 0.1 %; Phosphorus 0.010 to 0.08 %; Silicon 0.06 to 1.5 %; Sulfur 0.009 to 0.1 %; Vanadium 0.012 to 0.6 %. The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.


Subsector : M01 Registration Date : 2012-07-06Organization : ISSCountry : Serbia Latest Date for Comments : 2012-08-03Project ID : 00038075/0001 Draft for public enquiryICS : 71.040.50National Ref : SRPS C.A1.095Title : Standard Practice for Verification and Use of Control Charts in Spectrochemical

AnalysisScope : This practice covers procedures for determining if a spectrochemical analysis is under

statistical control. Criteria are presented for determining when corrective action is required. Control will be effected by using verifiers to test instrument response. It is recommended, although not required, that this be accompanied by the plotting of control charts.The preparation of control charts is described. Limitations—The procedures that are described do not apply to analyses that require a calibration each time a set of analyses is run. Reference is made specifically to atomic emission spectrometry, but the practice has a more general application.This practice does not apply to validation procedures that monitor the correctness of calibration.


Subsector : M01 Registration Date : 2012-07-06

Organization : ISSCountry : Serbia Latest Date for Comments : 2012-08-03Project ID : 00038078/0001 Draft for public enquiryICS : 71.040.50National Ref : SRPS C.A1.096Title : Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric AnalysisScope : This guide is an introduction to mathematical procedures for correction of interelement

(matrix) effects in quantitative X-ray spectrometric analysis. The procedures described correct only for the interelement effect(s) arising from a homogeneous chemical composition of the specimen. Effects related to either particle size, or mineralogical or metallurgical phases in a specimen are not treated. These procedures apply to both wavelength and energy-dispersive X-ray spectrometry where the specimen is considered to be infinitely thick, flat, and homogeneous with respect to the depth of penetration of the exciting X rays.


Subsector : M01 Registration Date : 2012-07-06Organization : ISSCountry : Serbia Latest Date for Comments : 2012-08-03Project ID : 00038081/0001 Draft for public enquiryICS :National Ref : SRPS C.A1.097Title : Standard Guide for X-Ray Emission Spectrometric AnalysisScope : This guide covers guidelines for developing and describing analytical procedures using a

wavelength-dispersiveX-ray spectrometer. The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.


Subsector : M01 Registration Date : 2012-07-06Organization : ISSCountry : Serbia Latest Date for Comments : 2012-08-03Project ID : 00038461/0001 Draft for public enquiryICS : 77.040.30National Ref : SRPS C.A1.098Title : Standard Guide for Specifying the Chemical Compositions and Selecting Sampling

Practices and Quantitative Analysis Methods for Metals, Ores, and Related MaterialsScope : This guide covers procedures for specifying compositional requirements and identifying

appropriate sampling and quantitative analysis methodologies to be referenced in product specification standards for metals, ores, and related materials.


Subsector : M01 Registration Date : 2012-07-12Organization : SIS Draft Issue Date : 2012-07-11Country : Sweden Latest Date for Comments : 2012-09-11Project ID : 00212540/0002 Project Established

ICS : 77.140.50National Ref : 212540Title : Steel for the reinforcement of concrete – Weldable reinforcing steel – Technical delivery

conditions for bars, coils, welded fabric and lattice girdersScope : Requirements, designations and delivery conditions for bar, coil, svetsat nät and lattice

girder of weldable steel for reinforcing of concrete



Subsector M08: LIGHT ALLOYS

Subsector : M08 Registration Date : 2012-07-06Organization : ISSCountry : Serbia Latest Date for Comments : 2012-08-03Project ID : 00037835/0001 Draft for public enquiryICS : 71.040.50National Ref : SRPS C.A1.316Title : Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence

Spectrometry Scope : This test method covers the X-ray fluorescence analysis of titanium alloys for the following

elements in the ranges indicated: Aluminum 0.041 % to 8.00 % ;Chromium 0.013 % to 4.00 % ;Copper 0.015 % to 0.60 % ;Iron 0.023 % to 2.00 % ;Manganese 0.003 % to 9.50 % ;Molybdenum 0.005 % to 4.00 % ;Nickel 0.005 % to 0.80 % ;Niobium 0.004 % to 7.50 % ;Palladium 0.014 % to 0.200 % ;Ruthenium 0.019 % to 0.050 % ;Silicon 0.014 % to 0.15 % ;Tin 0.017 % to 3.00 % ;Vanadium 0.017 % to 15.50 % ;Yttrium 0.0011 % to 0.0100 % ;Zirconium 0.007 %to 4.00 %.

Relatedness :National : NewInternational : Identical to ASTM E539 - 11

Subsector : M08 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039675/0001 Project EstablishedICS :National Ref : PNE 38865Title : Magnesium and magnesium alloys. Determination of lead and cadmium.Scope : This standard specifies wet analytical methods for lead and cadmium. There are two

methods for the simultaneous determination of lead and cadmium in magnesium and its alloys.



Subsector M10: METALLIC COATINGS

Subsector : M10 Registration Date : 2012-07-17Organization : SIS Draft Issue Date : 2012-07-11Country : Sweden Latest Date for Comments : 2012-09-11Project ID : 00147000/0001 Project EstablishedICS :National Ref : 147000Title : Metallic coatings - Passivation conversion coatings free from hexavalent chromium for

electro-plated coatings of zinc on iron or steelScope : Requirements and designations for passivation coatings and supplementary treatments on

electro plated coatings on zinc on iron or steel. The coatings don’t contain hexavalent chromium



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N02: SOLID FUELS

Subsector : N02 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039785/0001 Project EstablishedICS :National Ref : PNE 164002Title : Solid biofuels. TraceabilityScope : This standards establish the requirements of traceability for solid biofuels



Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 06233980/0001 Project EstablishedICS :National Ref : 06233980Title : Lubricants - Lubricating oils - Part 1: Lubricating oils C; Minimum requirements;

Amendment 1


Subsector : N03 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 06233981/0001 Project EstablishedICS :National Ref : 06233981Title : Lubricants - Lubricating oils - Part 2: Lubricating oils CL; Minimum requirements;

Amendment 1


Subsector : N03 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 06233982/0001 Project EstablishedICS :National Ref : 06233982Title : Lubricants - Lubricating oils - Part 3: Lubricating oils CLP; Minimum requirements;

Amendment 1



Subsector N13: LEATHER

Subsector : N13 Registration Date : 2012-07-19Organization : UNICountry : ItalyProject ID : 88000810/0001 Project EstablishedICS : 59.140National Ref : U88000810Title : Leather - Criteria defining the performance characteristics of leathers with a low

environmental impactScope : This standard specifies minimum leather and environmental requirements of the

production process that a leather shall comply in order to called as a low environmental impact.


Subsector : N13 Registration Date : 2012-07-18Organization : AENORCountry : Spain Latest Date for Comments : 2012-08-26Project ID : P0035021/0002 Draft for public enquiryICS :National Ref : PNE 59050Title : Leather. Strain-free surface area measurement using optoelectronic equipmentScope : This Standard defines a test method for measuring the surface area, of any type of finished

or unfinished dry leather, free from any strain using optoelectronic equipment


Subsector : N13 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039670/0001 Project EstablishedICS :National Ref : PNE 59510Title : Footwear. Materials for uppers, lining and insocks. Determination of the content of

pentachlorophenol in textiles.Scope : This standard establishes a method for the determination of the content of

pentachlorophenol in textiles, by gas chromatography, over the concentration range of 0,.01 mg/kg to 10 mg/kg.



Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 11903419/0001 Project EstablishedICS :

National Ref : 11903419Title : Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part

1: DN 35 to DN 100 with pipe thread


Subsector : N14 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 11903420/0001 Project EstablishedICS :National Ref : 11903420Title : Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube wells - Part

2: DN 100 to DN 200 with trapezoidal thread


Subsector : N14 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 11903421/0001 Project EstablishedICS :National Ref : 11903421Title : Well screens and casings of unplasticized polyvinylchloride (PVC-U) for tube well - Part

3: DN 250 to DN 400 with trapezoidal thread


Subsector : N14 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 11903423/0001 Project EstablishedICS :National Ref : 11903423Title : Pipe hoisting caps for casing pipes according to DIN 4918


Subsector : N14 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 11903424/0001 Project EstablishedICS :National Ref : 11903424Title : Screwed seamless casing pipes



Subsector N19: TAPES

Subsector : N19 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 06234002/0001 Project EstablishedICS :National Ref : 06234002Title : Bitumen and bituminous binders - Determination of the stickiness of rapid curing cut-

backs



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S08: AIR QUALITY

Subsector : S08 Registration Date : 2012-07-12Organization : ASICountry : AustriaProject ID : 00024934/0001 Project EstablishedICS : 13.040.40, 91.140.10National Ref : ÖNORM M 7536Title : Periodic inspection of portable measuring instruments for the determination of exhaust

gas parameters of firing systems - Requirements for inspection bodies, testing procedure, test report

Scope : This ÖNORM specifies requirements for the periodic inspection of portable measuring instruments for the determination of O2, CO2 and CO concentration, the exhaust gas and combustion air temperature, the discharge pressure and the smoke number in exhaust gases of combustion plants.


Subsector : S08 Registration Date : 2012-07-18Organization : PKNCountry : PolandProject ID : 00159253/0001 Project EstablishedICS : 13.040.30National Ref : prPN-Z-04447Title : Air purity protection - Determination of cyclohexanone in workplaces by gas

chromatographyScope : This standard gives a method for the determination of the content of cyclohexanone (CAS:

108-94-1) in workplace air by gas chromatographic with a mass detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of cyclohexanone which can be determined by the method in the sampling and determination conditions specified in the standard is 2 mg/m3


Subsector : S08 Registration Date : 2012-07-18Organization : PKNCountry : PolandProject ID : 00159254/0001 Project EstablishedICS : 13.040.30National Ref : prPN-Z-04448Title : Air purity protection - Determination of cyclohexanol in workplaces by gas

chromatographyScope : This standard gives a method for the determination of the content of cyclohexanol (CAS:

108-93-0) in workplace air by gas chromatographic with a mass detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of cyclohexanol which can be determined by the method in the sampling and determination conditions specified in the standard is 1 mg/m3


Subsector : S08 Registration Date : 2012-07-18Organization : PKNCountry : PolandProject ID : 00159255/0001 Project EstablishedICS : 13.040.30National Ref : prPN-Z-04449Title : Air purity protection - Determination of butan-2-one in workplaces by gas

chromatographyScope : This standard gives a method for the determination of the content of butan-2-one (CAS:

78-93-3) in workplace air by gas chromatographic with a mass detection. The method is applicable during control of the hygienic-sanitary conditions. The lowest concentration of butan-2-one which can be determined by the method in the sampling and determination conditions specified in the standard is 44,5 mg/m3


Subsector : S08 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001653/0001 Project EstablishedICS : 13.030.30National Ref : NEN 2990:2011 Concept nlTitle : Air - Visual inspection and clearance sampling for control of asbestos demelition worksScope : Describes the final inspection method after asbestos is removed from a containment,

screen off space or location outside. This standard is not applicable for the determination of the concentration of asbestos in a non-demolition situation.


Subsector : S08 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001747/0001 Project EstablishedICS : 13.040.20National Ref : NTA 8399:2012 Concept nlTitle : Ambient air quality - VOS emission with infrared cameraScope : With an infrared camera it is possible to make the VOS-emissions invisible. This technical

agreement gives guidelines for the uniform use of the infrared camera with the intend that individual monitoring can be used for the reduction of VOS-emissions.



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 11903125/0001 Project EstablishedICS :National Ref : 11903125Title : German standard methods for the examination of water, waste water and sludge -

General information (group A) - Part 60: Analytical quality assurance for chemical and physicochemical water analysis (A 60)



Subsector S12: GAS ANALYSIS

Subsector : S12 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 06233985/0001 Project EstablishedICS :National Ref : 06233985Title : Gas analysis - Requirements for specifications of analysers/analytical equipment



Subsector S22: ENERGY SAVING

Subsector : S22 Registration Date : 2012-07-24Organization : NSAI Draft Issue Date : 2012-07-24Country : Ireland Latest Date for Comments : 2012-08-24Project ID : 01078888/0001 Project EstablishedICS :National Ref : I.S. 399Title : Energy Efficient Design - A design methodology for new plant, process and facilityScope : This standard is applicable to all new investments from large scale industrial plants to a

building infrastructure.

Relatedness :National : REV/AMD I.S. 399


Subsector S24: SOIL QUALITY

Subsector : S24 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001694/0001 Project EstablishedICS : 13.080.05National Ref : NTA 6751:2011 Concept nlTitle : Soil quality - Environmental availability of non-polar organic compounds - Determination

Title : of potential availability using TenaxScope : This technical agreement describes an extraction method for organic micro pollution using

Tenax. The method is applicable for soil or soily material including sediments and particulate matter



Subsector S99: UNDETERMINED

Subsector : S99 Registration Date : 2012-07-18Organization : AENORCountry : Spain Latest Date for Comments : 2012-08-16Project ID : P0029268/0001 Draft for public enquiryICS :National Ref : PNE 157001Title : General criteria for the drawing-up of the documents which make up a technical project.Scope : Esta norma tiene por objeto establecer los requisitos formales de carácter general con que

deben redactarse los proyectos de productos, obras, edificios, instalaciones y servicios



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2012-07-04Organization : ISRM

Country :Former Yugoslav Republic of Macedonia

Project ID : 00037170/0001Project

EstablishedICS : 03.220.50National Ref : prМКС 1000:2012Title : Integrated Quality and Safety Management Systems (IQSMS) – RequirementsScope : This standard specifies requirements for integrated quality and safety managementsystem

in the ANS sector by companies that provide ANS services in air traffic management



Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2012-07-16Organization : MSZTCountry : HungaryProject ID : 34831514/0001 Project EstablishedICS : 53.020National Ref : MSZ 9747:2012Title : Periodical control of automotive jacks

Relatedness :National : REV/AMD MSZ-07-4446:1991

Subsector : T03 Registration Date : 2012-07-09Organization : NBN Draft Issue Date : 2012-08-15Country : Belgium Latest Date for Comments : 2013-01-15Project ID : BE056368/0001 Project EstablishedICS : 75.200National Ref : NBN D 60-001Title : Installations for the supply of compressed natural gas to motor vehicles


Subsector : T03 Registration Date : 2012-07-31Organization : AENORCountry : SpainProject ID : P0039977/0001 Project EstablishedICS :National Ref : PNE 26480Title : Road vehicles. Determination of centre of gravity.Scope : This standard specifies methods for determining the location of the centre of gravity (CG)

of a road vehicle. A method for determining the coordinates of the CG in the horizontal plane is provided. Two methods for determining the height of the CG above the ground are specified: the axle lift as defined in ISO 10392:2011 and a tilting method.



Subsector T07: GLASS CONTAINERS

Subsector : T07 Registration Date : 2012-07-18Organization : AENORCountry : Spain Latest Date for Comments : 2012-08-26Project ID : P0039642/0002 Draft for public enquiryICS :National Ref : PNE 126409Title : Glass packaging. Finishes for bottles. Internal profile of screw thread finishes for non

carbonated liquids, designed to be used as closure with insert.Scope : This standard specifies de dimensional requirements for internal profiles of screw thread

finishes for non carbonated liquids, designed to be used as closure with insert (non refillable insert and pourer insert)



Subsector T08: CRANES

Subsector : T08 Registration Date : 2012-07-16Organization : MSZTCountry : HungaryProject ID : 34831512/0001 Project EstablishedICS : 53.020.20National Ref : MSZ 9721-7:2012Title : Periodical control of lifting equipment. Part 7: Tower cranes


Subsector : T08 Registration Date : 2012-07-16Organization : MSZTCountry : HungaryProject ID : 34831513/0001 Project EstablishedICS : 53.020.20National Ref : MSZ 9721-8:2012Title : Working, supportive, protective and elevating scaffolding. Installation and safety

requirements Periodical control of lifting equipment. Part 8: Mobile elevating work platforms



Subsector T12: INDUSTRIAL TRUCKS

Subsector : T12 Registration Date : 2012-07-16Organization : MSZTCountry : HungaryProject ID : 34831601/0001 Project EstablishedICS : 53.060National Ref : MSZ 16226:2012Title : Operational dokumentation of engine powered trucks

Relatedness :National : REV/AMD MSZ 16226:1985


Subsector T14: PACKAGING

Subsector : T14 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039792/0001 Project EstablishedICS :National Ref : PNE-EN 15823:2011/1MTitle : Packaging - Braille on packaging for medicinal productsScope : This modification includes national annexes with recommendations on Braille for

cardboard packaging for industrially manufactured medicinal products not aimed to hospital use in Spain. The recommendations refer to information on labelling and Spanish Braille alphabet

Relatedness :National : REV/AMD UNE-EN 15823:2011

Subsector : T14 Registration Date : 2012-07-31Organization : AENORCountry : SpainProject ID : P0039971/0001 Project EstablishedICS :National Ref : PNE 49601 INTitle : Packaging, Environmental managements aspects. Guide for the preparation and

presentation of single Business Plans of Packaging Waste Prevention.Scope : The document establishes recommendations for the preparation and presentation of single

business plans for packaging waste prevention.

Relatedness :National : REV/AMD UNE 49601:2007 IN


Subsector T15: CYCLES

Subsector : T15 Registration Date : 2012-07-02Organization : AENORCountry : SpainProject ID : P0039745/0001 Project EstablishedICS :National Ref : PNE 121001Title : Cycles with 3 or 4 wheels. Safety requirements and test methods

Scope : This standard specifies safety requirements and performance related with design, assembly and testing of 3 and 4 wheels cycles, and of their subassemblies.



Subsector T16: LIFTS & ESCALATORS

Subsector : T16 Registration Date : 2012-07-19Organization : UNICountry : ItalyProject ID : 85000512/0001 Project EstablishedICS : 91.140.90National Ref : U85000512Title : Modification of existing electric liftsScope : This standard specifies the state-of-the-art criteria for modifying or replacing parts of

hydraulic lifts complying with standards issued before the UNI EN 81-2 standard in conformity with the legislation in force



Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2012-07-31Organization : AENORCountry : SpainProject ID : P0040019/0001 Project EstablishedICS :National Ref : PNE 199171Title : Road traffic management equipment. Urban traffic management architecture. Functional

requirements and application protocolScope : This standard defines functional requirements and application protocol required to

integrate the urban traffic management architecture


Subsector : T19 Registration Date : 2012-07-31Organization : AENORCountry : SpainProject ID : P0040025/0001 Project EstablishedICS :National Ref : PNE 199181Title : Road traffic management equipment. Interurban traffic management architecture.

Description of the architectureScope : This standard describes the architecture required to integrate the interurban traffic

management equipments

Relatedness :

National : REV/AMD UNE 80303-1:2011


Subsector T20: TRAM- AND RAILWAY ENGINEERING

Subsector : T20 Registration Date : 2012-07-13Organization : DINCountry : GermanyProject ID : 08700940/0001 Project EstablishedICS :National Ref : 08700940Title : State of railway vehicles - Superstructure and special equipment of vehicles - Part 1:

Vehicle superstructure



Buffing and draw gear



Steps, handles, hand rails, ladders, railings



** End of Sector **




Sector Z : INFORMATION TECHNOLOGY


Subsector Z99: UNDETERMINED

Subsector : Z99 Registration Date : 2012-07-19Organization : UNICountry : ItalyProject ID : 14D00000/0001 Project EstablishedICS : 35.020National Ref : E14D00000Title : Unregulated professional activities - Professions in the ICT domain - Definition of

requirements for knowledge, ability and competenceScope : The standardization activity intends to define the general criteria for professionals active in

the ICT domain, establishing the fundamental requirements for the set of knowledge, abilities and competences that characterize them. The project addresses the professions in the ICT domain, regardless of the working methods and contractual issues. The envisaged standard will adopt the European reference framework, competencies definitions and related skills “e_Competence Framework 2.0” and its future developments, adapting it , where appropriate, to the national context.


Subsector : Z99 Registration Date : 2012-07-05Organization : NENCountry : NetherlandsProject ID : 50001733/0001 Project EstablishedICS : 35.020National Ref : NPR 5313-2-2:2012 Concept nlTitle : Computer rooms and data centres - Part 2-2: Management - Agenda for tactical

management levelScope : This part of NPR 5313 contains five subjects for agenda's on strategic management level.

These relevant subjects are: - Life cycle management; - Program of specifications; Design basics; Commissioning, building, realization; - Deliverance.



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

monthly notifications register - sutn · information procedure page 1 monthly notifications...

Documents