(msds) organic soy lecithin dry - praan naturals · soy lecithin 8002-43-5 232-307-2 maltodextrin...

3
341 Christian Stre Tel: (203) 267- www.naturalsourcing.com eet, Oxford, CT 06478 USA -6061 Fax: (203) 267-6065 m [email protected] MATERIAL SAFETY DATA SHEET ORGANIC SOY LECITHIN DRY BLEND M MSDS 1. PRODUCT NAME AND COMPANY IDENTIFICATIO ON Product Name: ORGANIC SOY LECITHIN DRY Y BLEND Product Use: Personal Care Formulations Company Name: Natural Sourcing Company Address: 341 Christian Street, Oxford, CT T 06478, USA Date Issued: 09/27/2011 Emergency Telephone Number: Chemtrec Tel: (800) 262-8200 2. COMPOSITION/INGREDIENT INFORMATION Ingredient Name: CAS No: EINECS No: Soy Lecithin 8002-43-5 232-307-2 Maltodextrin 9050-36-6 232-940-4 Rice Concentrate N/A N/A Silicone Dioxide 14808-60-7 2328-878-4 Hazardous Components: None Exposure Limits: N/A 3. HAZARDS IDENTIFICATION Eye Contact: May cause mechanical irritation n to eyes. 4. FIRST AID MEASURES Eyes: Flush with plenty of water or eye Get medical attention if irritation e wash solution for 15 minutes. n persists. Skin: Wash with soap and water- get m occurs. medical attention if irritation Ingestion: No Antidotes Required, Edible Inhalation: Remove to fresh air. If not breat If breathing is difficult, give oxyg thing, give artificial respiration. gen. Seek medical attention. Medical Conditions Generally Aggravated by Exposure: Persons with respiratory conditio ons may be at increased risk 5. FIRE FIGHTING MEASURES Flash Point (Method Used): Not Applicable Flammable Limits: LEL: Not Established UEL: Not Established

Upload: others

Post on 23-Mar-2020

7 views

Category:

Documents


0 download

TRANSCRIPT

341 Christian Street, Oxford, CT 06478 USATel: (203) 267-6061 Fax: (203) 267-6065

www.naturalsourcing.com [email protected]

341 Christian Street, Oxford, CT 06478 USATel: (203) 267-6061 Fax: (203) 267-6065

www.naturalsourcing.com [email protected]

MATERIAL SAFETY DATA SHEET

ORGANIC SOY LECITHIN DRY BLEND MSDSMSDS

1. PRODUCT NAME AND COMPANY IDENTIFICATION1. PRODUCT NAME AND COMPANY IDENTIFICATION1. PRODUCT NAME AND COMPANY IDENTIFICATIONProduct Name: ORGANIC SOY LECITHIN DRY BLENDORGANIC SOY LECITHIN DRY BLENDProduct Use: Personal Care FormulationsPersonal Care FormulationsCompany Name: Natural SourcingNatural SourcingCompany Address: 341 Christian Street, Oxford, CT 06478, USA341 Christian Street, Oxford, CT 06478, USADate Issued: 09/27/201109/27/2011Emergency Telephone Number: Chemtrec Tel: (800) 262-8200Chemtrec Tel: (800) 262-8200

2. COMPOSITION/INGREDIENT INFORMATION2. COMPOSITION/INGREDIENT INFORMATION2. COMPOSITION/INGREDIENT INFORMATIONIngredient Name: CAS No: EINECS No:Soy Lecithin 8002-43-5 232-307-2Maltodextrin 9050-36-6 232-940-4Rice Concentrate N/A N/ASilicone Dioxide 14808-60-7 2328-878-4

Hazardous Components: NoneNoneExposure Limits: N/AN/A

3. HAZARDS IDENTIFICATION3. HAZARDS IDENTIFICATION3. HAZARDS IDENTIFICATIONEye Contact: May cause mechanical irritation to eyes.May cause mechanical irritation to eyes.

4. FIRST AID MEASURES4. FIRST AID MEASURES4. FIRST AID MEASURES

Eyes: Flush with plenty of water or eye wash solution for 15 minutes. Get medical attention if irritation persists.Flush with plenty of water or eye wash solution for 15 minutes. Get medical attention if irritation persists.

Skin: Wash with soap and water- get medical attention if irritation occurs.Wash with soap and water- get medical attention if irritation occurs.

Ingestion: No Antidotes Required, EdibleNo Antidotes Required, Edible

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention. Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention.

Medical Conditions Generally Aggravated by Exposure: Persons with respiratory conditions may be at increased risk Persons with respiratory conditions may be at increased risk

5. FIRE FIGHTING MEASURES5. FIRE FIGHTING MEASURES5. FIRE FIGHTING MEASURESFlash Point (Method Used): Not ApplicableNot Applicable

Flammable Limits: LEL: Not EstablishedUEL: Not EstablishedLEL: Not EstablishedUEL: Not Established

Extinguishing Media:

• Dry Chemical• Water• Carbon Dioxide• Foam

• Dry Chemical• Water• Carbon Dioxide• Foam

Special Firefighting Procedures: • Use air supplied equipment for fighting interior fires. • Use air supplied equipment for fighting interior fires.

Unusual Fire & Explosion Hazards:Can burn in fire, releasing toxic vapors. Vapors are heavier than air and can travel along the ground to remote ignition sources.

Can burn in fire, releasing toxic vapors. Vapors are heavier than air and can travel along the ground to remote ignition sources.

Effects of Overexposure: May cause mechanical irritation to eyes.May cause mechanical irritation to eyes.

6. ACCIDENTAL RELEASE MEASURES (STEPS FOR SPILLS)6. ACCIDENTAL RELEASE MEASURES (STEPS FOR SPILLS)6. ACCIDENTAL RELEASE MEASURES (STEPS FOR SPILLS)

Personal Protection: Goggles/Safety Glasses, Rubber GlovesProvide adequate ventilation in work area.Goggles/Safety Glasses, Rubber GlovesProvide adequate ventilation in work area.

Environmental Protection: Notify authorities if large amounts of product enters sewer.Notify authorities if large amounts of product enters sewer.

Methods for Cleaning Up:Use appropriate NIOSH/MSHA approved respirator. Wear

chemical gloves, goggles, and lab coat. Carefully contain spilled material. Deposit spilled material in appropriate waste container.

Use appropriate NIOSH/MSHA approved respirator. Wear chemical gloves, goggles, and lab coat. Carefully contain spilled material. Deposit spilled material in appropriate waste container.

7. HANDLING AND STORAGE7. HANDLING AND STORAGE7. HANDLING AND STORAGEHandling

Safe Handling: • Wear safety glasses. Avoid contact with eyes. Use in well ventilated area. Wash hands after use.

• Wear safety glasses. Avoid contact with eyes. Use in well ventilated area. Wash hands after use.

Storage

Requirements for Storage: • Store in a cool, dry location, in a sealed container in a well ventilated area. Keep away from excessive heat.

• Store in a cool, dry location, in a sealed container in a well ventilated area. Keep away from excessive heat.

8. EXPOSURE CONTROL/PERSONAL PROTECTION8. EXPOSURE CONTROL/PERSONAL PROTECTION8. EXPOSURE CONTROL/PERSONAL PROTECTION

Engineering Controls: Provide exhaust ventilation. Ensure that eyewash stations are proximal to the work area.Provide exhaust ventilation. Ensure that eyewash stations are proximal to the work area.

Personal ProtectionEye: Safety glasses should be worn.Safety glasses should be worn.Skin/Body: Lab coats and gloves should be worn.Lab coats and gloves should be worn.

Respiratory: Use adequate ventilation or NIOSH-approved respiratory devices to control exposure.Use adequate ventilation or NIOSH-approved respiratory devices to control exposure.

Ventilation: Handle in well ventilated areas.Handle in well ventilated areas.

Other: Evaluate need based on application. Slip proof shoes may be worn where spills may occur.Evaluate need based on application. Slip proof shoes may be worn where spills may occur.

Work/Hygiene Practice: Normal work and hygiene practices for handling non-hazardous dry material.Normal work and hygiene practices for handling non-hazardous dry material.

9. PHYSICAL AND CHEMICAL PROPERTIES9. PHYSICAL AND CHEMICAL PROPERTIES9. PHYSICAL AND CHEMICAL PROPERTIESPhysical State: GranulesGranulesColor: BrownBrownOdor: CharacteristicCharacteristicSpecific Gravity (H2O = 1): N/AN/AAcid Value: (% oleic) N/AN/AFlash Point (Method Used): N/AN/ABoiling Point: N/AN/A

Melting Point: N/AN/ApH: N/AN/ASolubility in Water: InsolubleInsoluble

10. STABILITY AND REACTIVITY10. STABILITY AND REACTIVITY10. STABILITY AND REACTIVITYStability: StableStableConditions to Avoid: Open flames and sparks, extreme heat, oxidizing materialsOpen flames and sparks, extreme heat, oxidizing materialsIncompatibility (Materials to Avoid): Oxidizing materials and strong caustic materialsOxidizing materials and strong caustic materialsHazardous Decomposition or Byproducts: Incomplete combustion can form CO, CO2 and dense smokeIncomplete combustion can form CO, CO2 and dense smokeHazardous Polymerization: Will Not OccurWill Not Occur

11. TOXICOLOGICAL INFORMATION11. TOXICOLOGICAL INFORMATION11. TOXICOLOGICAL INFORMATIONRoutes of Entry: Inhalation, Ingestion, EyesInhalation, Ingestion, EyesToxicity Data: Not AvailableNot Available

12. ECOLOGICAL INFORMATION12. ECOLOGICAL INFORMATION12. ECOLOGICAL INFORMATIONEcological Information: Not AvailableNot AvailableBOD5 and COD: Not AvailableNot AvailableProducts of Biodegradation: Not AvailableNot Available

13. DISPOSAL CONSIDERATIONS13. DISPOSAL CONSIDERATIONS13. DISPOSAL CONSIDERATIONS

Waste Disposal Methods: Do not put into sewer lines. Dispose of according to local, state and federal regulations.Do not put into sewer lines. Dispose of according to local, state and federal regulations.

14. TRANSPORT INFORMATION14. TRANSPORT INFORMATION14. TRANSPORT INFORMATIONDOT Classification: Not a DOT controlled material.Not a DOT controlled material.

15. REGULATORY INFORMATION15. REGULATORY INFORMATION15. REGULATORY INFORMATION

16. ADDITIONAL INFORMATION16. ADDITIONAL INFORMATION16. ADDITIONAL INFORMATIONThis information is provided for documentation purposes only. This material is not considered to be Hazardous.

The complete range of conditions or methods of use are beyond our control therefore we do not assume any responsibility and expressly disclaim any liability for any use of this product. Information contained herein is believed to be true and accurate however, all statements or suggestions are made without warranty, expressed or implied, regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof. Compliance with all applicable federal, state, and local laws and local regulations remains the responsibility of the user.

This safety sheet cannot cover all possible situations which the user may experience during processing.  Each aspect of your operation should be examined to determine if, or where, additional precautions may be necessary.  All health and safety information contained in this bulletin should be provided to your employees or customers.

This information is provided for documentation purposes only. This material is not considered to be Hazardous.

The complete range of conditions or methods of use are beyond our control therefore we do not assume any responsibility and expressly disclaim any liability for any use of this product. Information contained herein is believed to be true and accurate however, all statements or suggestions are made without warranty, expressed or implied, regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof. Compliance with all applicable federal, state, and local laws and local regulations remains the responsibility of the user.

This safety sheet cannot cover all possible situations which the user may experience during processing.  Each aspect of your operation should be examined to determine if, or where, additional precautions may be necessary.  All health and safety information contained in this bulletin should be provided to your employees or customers.

This information is provided for documentation purposes only. This material is not considered to be Hazardous.

The complete range of conditions or methods of use are beyond our control therefore we do not assume any responsibility and expressly disclaim any liability for any use of this product. Information contained herein is believed to be true and accurate however, all statements or suggestions are made without warranty, expressed or implied, regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof. Compliance with all applicable federal, state, and local laws and local regulations remains the responsibility of the user.

This safety sheet cannot cover all possible situations which the user may experience during processing.  Each aspect of your operation should be examined to determine if, or where, additional precautions may be necessary.  All health and safety information contained in this bulletin should be provided to your employees or customers.