mtc2018 ebrochure 20180802 miya - simpatec...cae and process simulation at the institute ikv aachen....
TRANSCRIPT
AGENDA
DAY 1: TUESDAY, 25 SEP, 2018
X
Time Session Presenter
0830 - 09:00 Registra on
09:00 - 09:10 pening
09:10 - 09:50 Integra ve Simula on of Thermally Conduc ve Polymers with
ltrasim® BASF Andreas Wonisch
09:50 - 10:30 Thermoset Process Simula on at SC BOSCH
alázs Solymossy
10:30 - 10:40 Award Ceremony
10:40 - 11:00 Co ee reak
11:00 - 11:40 Moving Pin Simula on and Tool De ec on INglass Nicola Pavan
11:40 - 12:20 Applica on of the Warpage Analysis to p mize Shrinkage and Deforma on in a Large Component in PA66 GF30
RADICI Carlo Grassini
12:20 - 13:30 Lunch
13:30 - 14:10
1. Case Studies and est Prac ces for Plas c In ec onMolding from Pre- to Post- Processing sing ANSA META
2. nleashing the full Poten al of ANSA Meshing Capa ili esfor RTM Analysis
14:10 - 14:50 Challenges of Simula on of Thermose ng Molding Compounds
Schwarz Plastic Solutions
Ingo Schwarz
14:50 - 15:30 Process Numerical Simula on to Serve An vi ratory Composite Part (D NAFI )
IPC Patrick DEWAILL
15:30 - 16:00 Co ee reak
16:00 - 16:40 ridging the Gap etween Product Development and
Manufacturing through Training and Instrumenta on RJG Kenny Lu
16:40 - 17:20 T D Arconic Luca Ga uri
17:20 - 18:00 Power Lies in the Water Fluid-Assisted In ec on Molding and Its Simula on: the Com ina on for Improved E ciency
SimpaTec Cristoph inse
18:00-19:30 Aperi f
BETA SystemsPanagio s Fotopoulos
AGENDA
DAY 2: WEDNESDAY, 26 SEP, 2018
X
Time Session Presenter
09:00 - 09:10 pening
09:10 - 09:50 Simula on of Demolding Issues, Full automa c Flow Simula on and nline Measurement of Viscosity Data
LEGO rian Keith Sørensen,
Patrick Guerrier
09:50 - 10:30 ow to Integrate Moldex3D D E Module on Set
up Work ow Grupo Antolin CARMEN de uli arri Mar nez
10:30 - 10:40 Award Ceremony
10:40 - 11:00 Co ee reak
11:00 - 11:40 An p miza on Approach to Reduc on of Warpage in Automo ve Interior Parts
Dr. Schneider Przemyslaw Narowski
11:40 - 12:20 T D SIMONIS Group Ghislain Gilliot
12:20 - 13:00 Design and Analysis of Composite il Pan for Automo ve Vehicle
Bay Zoltan Ro ert eleznai
13:00 - 13:40 Moldex3D R16 and eyond Moldex3D David su
13:40 - 15:00 Lunch
Dr. Wonisch studied physics at the University of Bielefeld. After university he wrote his dissertation at the Fraunhofer-Institute for Mechanics of Materials IWM in Freiburg on simulation of granular media and komplex fluids. In 2009 he received the award of Material Mechanics of the Plansee Mitsubishi Group. Till 2011 he stayed at the Institute as a scientific assistant and since then he is employee of BASF SE with main focus on rheological behaviour of technical plastics, numerical optimization and model development.
Andreas WonischBASF SE (D) / Team Leader Process Analysis
SPEAKER HIGHLIGHTS
The Bosch Group is a leading global supplier of technology and services. It employs roughly 402,000 associates worldwide (as of December 31, 2017). The company generated sales of 78.1 billion euros in 2017. Its operations are divided into four business sectors: Mobility Solutions, Industrial Technology, Consumer Goods, and Energy and Building Technology. As a leading IoT company, Bosch offers innovative solutions for smart homes, smart cities, connected mobility, and connected manufacturing. It uses its expertise in sensor technology, software, and services, as well as its own IoT cloud, to offer its customers connected, cross-domain solutions from a single source. The Bosch Group’s strategic objective is to deliver innovations for a connected life. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.”
Balázs SolymossyBOSCH / Technology developer
1MTC THE WORLD’S LEADING PLASTICS EXPERT CONFERENCEX
SPEAKER HIGHLIGHTS
Nicola Pavan studied Mechanical Engineering at Padova University, in 2010 he reached the Master Degree with a specialization in Machinery and Fluid-dynamics.
In the same year in join INglass group, based in San Polo di Piave, Italy, has Application Engineer developing injection solution to support customer applications. At that time he started writing the basic code of HRS’s pressure drop simulator which was completed the year later enhancing dramatically HRS design capability. Starting from 2013 he has covered the role of CAE Manager in INglass leading Worldwide CAE team and cooperating with OEM, polymers producer and the main players in Simulation Techology, as Moldex 3D, to enhance simulation capability and predictions. In 2015 he also become member of Innovation Team, dealing with strategic projects in software automation and contributing to technological innovation of HRSflow. Up to know he collect large experience on simulations, numerical computing, mathematical modelling and optimization techniques with a strong focus on plastic injection moulding processes and materials.
Nicola PavanINglass-HRS / CAE Manager
Master’s degree in Materials Engineering at University of Brescia, Italy in 2009. Since 2010 working in RadiciGroup Performance Plastics in Technical Service and Market Development sector, caring for application development projects with key customers, following all the technical aspects from material selection to problem solving. He is also global responsible for the CAE support service, which RadiciGroup Performance Plastics provides to customers in support of strategic projects.
Carlo GrassiniRADICI / Technical Marketing and CAE project leader
2MTC THE WORLD’S LEADING PLASTICS EXPERT CONFERENCEX
SPEAKER HIGHLIGHTS
Obtaining his master degree in Automotive Engineering at Coventry University (UK), he started his career as CAE engineer at BETA CAE Systems, where he supports customers with the company’s softwares suite for more than a decade. For the last couple of years he has been working with ANSA and META for plastics and injection molding applications to provide advanced solutions for pre- and post- processing.
Panagiotis FotopoulosBETA / Senior Engineer at CAE Systems
Education: Munich Business School and Industrial Management Ass. and practical technical training for plastic molding.
● 1977 Member of Management in the plastic molding business of parents(~ 100 staff)
● 1990 General Manager of Spanish subsidiary of German entity (45 staff)
● 2003 Head of task force "Alliance for thermoset solutions" industryassociation AVK (till 2009)
● 2016 General Manager of consulting entity “Schwarz Plastic SolutionsGmbH”, specialized on thermosetting molding solutions
● 2018 Collaboration partner of SimpaTec/Moldex3D for thermosettingapplications
About 40 years of practical experience in the thermosetting molding industry. Working with Moldex3D since 2011, in particular on thermosets. combining structural, thermal and filling analysis for products and molds.
Ingo SchwarzSCHWARZ PLASTIC SOLUTIONS / Managing Director
3MTC THE WORLD’S LEADING PLASTICS EXPERT CONFERENCEX
Patrick DEWAILLY
Patrick DEWAILLY is a numerical engineer for process/product at CEMCAT. Before working in the field of composites, he started in CFD simulation for automotive manufacturer (Renault, Faurecia, Volvo Trucks). In 2009, he worked in vibro-acoustic simulation for Canon Research France. One of his main goals when he arrived at IPC(ex CEMCAT) in 2011 was able to link the process simulation and structural simulation for many composite process (RTM, Therma stamping, overmolding,….).
IPC (POLE EUROPEEN DE PLASTURGIE) / Numerical Engineer for Process and Product
Over past decades, the plastics industry has adopted a variety of technologies in design engineering and manufacturing. The challenges and complexity of injection molded parts increases the cost and risk. Although molding simulation is regarded as one of the valuable tools in the development cycle, often there are barriers to meet professional consensus among work forces at different roles. This presentation will discuss real-world case studies to show how collaboration and validation can positively impact development from design to production.
Kenny Lu is an engineering consultant for RJG, Inc. His plastics career started in 2000 as a structural engineer in Taiwan. He then joined Moldex3D in Taiwan as a field application engineer, which eventually brought him to the United States. In 2015, Kenny began his career at RJG on the TZERO® team, providing a framework for collaboration between engineering and manufacturing across the injection molding industry.
Kenny LuRJG / Engineering Consultant
SPEAKER HIGHLIGHTS
4MTC THE WORLD’S LEADING PLASTICS EXPERT CONFERENCEX
Cristoph Hinse is a cofounder of the company SimpaTec GmbH in Aachen, one of the leading engineering and software partners for the plastic processing industry. Already during his studies in Chemical Engineering - with a special focus on plastics technology; he gains his first experiences in CAE and process simulation at the institute IKV Aachen. After that, he was - in his function as a project manager - responsible for the coordination, organization and realization of simulation aided engineering projects.
Since 2004 Cristoph Hinse offers today as General Manager of SimpaTec, professional engineering services and support for the development and optimization of injection molding components in every stage of the process to the DACH, French and BeNeLux market. With different subsidiaries in Aachen, Reutlingen, Weimar, Linz (Austria), Guebwiller (France) and Bangkok (Thailand) SimpaTec is able to always be as near as possible to their user and to penetrate the plastic manufacturing market with the subject of injection molding process simulation.
SPEAKER HIGHLIGHTS
Cristoph HinseSimpaTec / Managing Director of SimpaTec
5MTC THE WORLD’S LEADING PLASTICS EXPERT CONFERENCEX
Patrick Guerrier
The name 'LEGO' is an abbreviation of the two Danish words "leg godt", meaning "play well". It’s our name and it’s our ideal. The LEGO Group was founded in 1932 by Ole Kirk Kristiansen. The company has passed from father to son and is now owned by Kjeld Kirk Kristiansen, a grandchild of the founder. It has come a long way over the past almost 80 years - from a small carpenter's workshop to a modern, global enterprise that is now one of the world's largest manufacturers of toys.
The LEGO brick is our most important product. We are proud to have been named“ Toy of the Century” twice. Our products have undergone extensive development over the years – but the foundation remains the traditional LEGO brick. The brick in its present form was launched in 1958. The interlocking principle with its tubes makes it unique and offers unlimited building possibilities.It's just a matter of getting the imagination going – and letting a wealth of creative ideas emerge through play.
Brian Keith SørensenLEGO / CAE Manager
SPEAKER HIGHLIGHTS
LEGO / CAE Engineer
LEGO
6MTC THE WORLD’S LEADING PLASTICS EXPERT CONFERENCEX
SPEAKER HIGHLIGHTS
Róbert Beleznai, PhD, is a Senior Key Expert at Bay Zoltán Nonprofit Ltd. for Applied Research in Hungary with 14 years working experience in the field of mechanical engineering. His scientific activities include the injection moulding simulation of polymer automotive parts along with the damage analysis of structural materials employing the modern failure assessment and fracture mechanics methods. He has been active in several national and international R&D projects.
BELEZNAI RóbertBay Zoltán / Senior Key Expert
7MTC THE WORLD’S LEADING PLASTICS EXPERT CONFERENCEX
The name Dr. Schneider stands for: innovative power and aesthetics, superior quality and perfection, dependability – and a sense of responsibility. We call this „Focus on Excellence“. Our employees work around the globe on pioneering ideas, new technologies and our excellent products – with one goal always on their minds: to make the car the best place in the world.
After graduating in Mechanical Engineering from Warsaw University of Technology Przemyslaw Narowski has worked for over than ten years in polymer processing industry. Since 2015 he provides support and consulting to evaluation of injection molded parts in automotive interiors at Dr. Schneider Poland. Being still a part of academia he continues his journey to undiscovered lands of polymer science and engineering.
Przemyslaw NarowskiDR. SCHNEIDER / CAE Engineer
SPEAKER HIGHLIGHTS
Moldex3D was founded in 1995, it has provided the professional plastic injection molding simulation solution for the plastic injection molding industry, and marketed worldwide.
Committed to providing the advanced technologies and solution for industrial demands, Moldex3D has extended the worldwide sales and service network to provide local, immediate, and professional service. Nowadays, Moldex3D presents the innovation technology, which helps customers to troubleshoot from product design to development, to optimize design pattern, to shorten timeto-market, and maximize product ROI.
David HsuMoldex3D / President of Product Team
8MTC THE WORLD’S LEADING PLASTICS EXPERT CONFERENCEX