MULTIGRADE MOTOR OILSAE 5W-20 / 5W-30 / 10W-30 / 10W-40 / 20W-50

PEAK® PERFORMANCE MULTIGRADE MOTOR OIL is formulated with an advanced additive technology and premium base oils for high performance and longer engine life. PEAK PERFORMANCE MULTIGRADE MOTOR OIL is formulated to exceed the toughest automotive standards for outstanding engine protection and performance in today’s advanced engine designs.

MULTIGRADE MOTOR OIL

DESCRIPTION:

PEAK® PERFORMANCE MULTIGRADE MOTOR OIL is recommended for use in all gasoline engines, including turbocharged, in passenger cars, light-duty trucks, vans and sport utility vehicles. PEAK® PERFORMANCE MULTIGRADE MOTOR OIL SAE 5W-20, 5W-30 and 10W-30 exceed the demanding requirements of the International Lubricant Standardization and Approval Committee (ILSAC) GF-5. GF-5 is the latest standard for passenger car, van, light-duty truck and sport utility engine oils. It also exceeds API SN Service Classification requirements.

Viscosity recommendations vary according to temperature and engine manufacturer. For most new cars, products meeting API SM Service Classification are recommended. PEAK® PERFORMANCE MULTIGRADE MOTOR OIL SAE 10W-40 and 20W-50 are recommended for use in older vehicles where the owner’s manual recommends an API SL, SJ, SH, SG, SF, SE motor oil. Always consult your owner’s manual for correct viscosity choice and API Service Category recommendations.

PEAK® PERFORMANCE MULTIGRADE MOTOR OIL is not recommended for use in diesel engines. In diesel engine applications, the use of PEAK PERFORMANCE HEAVY DUTY MOTOR OIL is recommended.

APPLICATION:

BENEFITS:• Exceeds API SN Service Classification (all grades)• Exceeds ILSAC GF-5 requirements (SAE 5W-20, 5W-30 and 10W-30)• Meets passenger car and light-duty truck manufacturers’ warranty requirements • Low friction formula helps improve gas mileage (SAE 5W-20, 5W-30 and 10W-30)• Protects engines under demanding stop and go driving conditions• Meets the highest U.S. standards for automotive engine wear protection• Protects against the formation of sludge and varnish deposits on engine parts• NOTE: 5W-20, 5W-30, and 10W-30 Bulk Products are Synthetic Blend

PM0110512

MULTIGRADE MOTOR OILSAE 5W-20 / 5W-30 / 10W-30 / 10W-40 / 20W-50

MULTIGRADE MOTOR OILPRODUCT PART NUMBERS:

Drum Part Number

Quart UPC CodeCase UPC CodeCase SCC-14 Code

API Gravity (ASTM D-287)

Flash Point, ºCPour Point, ºC

Viscosity‘@ 40 ˚C, cSt (ASTM D-445)

‘@ 100 ˚C, cSt (ASTM D-445)

Viscosity Index (ASTM D-2270)

Noack Volatility (D5800)

Sulfated Ash, wt% (D874)

Test (Method)

SAE Viscosity GradeAPI ClassificationILSAC**SYNTHETIC BLEND**

Quart Part Number

P3M051

32206-39

559.9416914.50.96

5W-30

0-74804-01309-2

0-74804-11309-9

6-00-74804-01309-4

5W-30

5W-30SNGF-5

P3M057

P3M011

31202-30

6810.413915.20.87

10W-30

0-74804-01310-8

0-74804-11310-5

6-00-74804-01310-0

10W-30

10W-30SNGF-5

P3M017

P4M011 P5M021

31202-30

10615.515514.90.87

10W-40

27.5204-21

16118.21266.20.88

20W-50

0-74804-01311-5

0-74804-11311-2

6-00-74804-01311-7

10W-40

0-74804-01312-2

0-74804-11312-9

6-00-74804-01312-4

20W-50

10W-40SN

P4M017

20W-50SN

P5M027

32202-33

468.5816512.60.96

P2M051Bulk Part Number P3MS50** P3MS10** P4M010 P5M020P2MS50**

5W-20

0-74804-01308-5

0-74804-11308-2

6-00-74804-01308-7

5W-20

5W-20SNGF-5

P2M057

PRODUCT SHIPPING INFORMATION:Pack/Units Per CaseCubic FeetCase DimensionsCases Per Pallet

12/1 Quart

.73 cu Ft.

13.25” L x 10.25” W x 9.25” H

84

Pallets/Cases Per TruckUnits Per TruckPallet SizeCases/Rows High

21/1,764

21,168

48” L x 40” W x 60.5” H

14/6

HANDLING AND SAFETY INFORMATION Refer to Old World Industries Material Safety Data Sheet (MSDS).The MSDS is available from your PEAK Performance Supplier at www.peaklubricants.com, or by callingOld World Industries’ PEAK technical support line at 1-800-477-5847.

(*) Including pallet at 50 lbs. each55 gallon

PACK

450 lbs.

UNITWEIGHT

1,850 lbs.

PALLETWEIGHT*

4 drums

UNITSPER PALLET

84 drums

UNITSPER TRUCK

Drums

UNIT

21

PALLETSPER TRUCK

5 Quart Part Number P2M055 P3M055 P3M015 P4M015 P5M024

Pack/Units Per CaseCubic FeetCase DimensionsCases Per Pallet

3/5 Quart

.81 cu Ft.

14.25” L x 7.88” W x 12.50” H

56

Pallets/Cases Per TruckUnits Per TruckPallet SizeCases/Rows High

24/1344

4,032

48” L x 40” W x 58.27” H

14/4

PEAK and the PEAK Mountain Graphic are Registered Trademarks of Old World Industries, LLC, INDYCAR Series (and Design) and Indianapolis 500 (and Design) are trademarks of Brickyard Trademarks, Inc., used with permission.

Distributed byOld World Industries, LLCNorthbrook, IL 60062p 800.323.5440w peaklubricants.com