synthetic motor oil - parman energy 5w-30 full... · synthetic motor oil sae 0w-20 / 5w-20 / 5w-30...
TRANSCRIPT
SYNTHETIC MOTOR OILSAE 0W-20 / 5W-20 / 5W-30 / 10W-30
PEAK® PERFORMANCE FULL SYNTHETIC MOTOR OILS are formulated with high quality synthetic base stocks and are fortified with an advanced additive technology to provide maximum protection for today’s modern engines. PEAK PERFORMANCE FULL SYNTHETIC MOTOR OILS meet most US and European industry standards like ILSAC GF-5 and API SN Service Classification.
PEAK PERFORMANCE FULL SYNTHETIC MOTOR OILS are recommended for use in all gasoline engines, including turbocharged, in passenger cars, light-duty trucks, vans and sport utility vehicles. PEAK PERFORMANCE FULL SYNTHETIC MOTOR OIL SAE 0W-20, 5W-20, 5W-30 and 10W-30 exceed the demanding requirements of the International Lubricant Standardization and Approval Committee (ILSAC) GF-5. GF-5 is the latest standard for passenger car, van, light-duty truck and sport utility engine oils. It also exceeds API SN Service Classification requirements.
Viscosity recommendations vary according to temperature and engine manufacturer. Always consult your owner’s manual for correct viscosity choice and API Service Category recommendations.
PEAK PERFORMANCE FULL SYNTHETIC MOTOR OILS are not recommended for use in diesel engines.
SYNTHETIC MOTOR OIL
DESCRIPTION:
• Meets most warranty requirements for U.S., European and Japanese cars and light trucks with gasoline and gasoline turbo charged engines where API SN, SM, SL, SJ or SH are specified
• Exceeds ILSAC GF-5 energy conserving performance standards• Protection against high temperature deposits that can damage your engine• Reduced friction and wear at engine start-up in cold weather• Maximum protection against viscosity breakdown• Protects engines under demanding stop and go driving conditions• Meets the highest U.S. standards for automotive engine wear protection• Protects against the formation of sludge and varnish deposits on engine parts• PEAK Full Synthetic 5W30 is a dexos1™ approved product
BENEFITS:
APPLICATION:
PEAK and the PEAK Mountain Graphic are Registered Trademarks of Old World Industries, LLC. INDYCAR Series (and Design) and Indianapolis 500 (and Design) are trademarks of Brickyard Trademarks, Inc., used with permission.
Distributed byOld World Industries, LLCNorthbrook, IL 60062p 800.323.5440w peaklubricants.com©2011
*dexos1 approved
SYNTHETIC MOTOR OILSAE 0W-20 / 5W-20 / 5W-30 / 10W-30
PRODUCT PART NUMBERS:
SYNTHETIC MOTOR OIL
API Gravity (ASTM D-287) Viscosity‘@ 40 ˚C, cSt (ASTM D-445)
‘@ 100 ˚C, cSt (ASTM D-445)
Viscosity Index (ASTM D-2270)
Sulfated Ash. % MassPour PointFlash PointNoack Volatility %
34.3557.8610.141640.92-45˚C226˚C11.2
34.7647.268.531590.9-48˚C228˚C11.7
33.8662.9710.231500.91-45˚C228˚C11.7
Drum Part Number P3MS51 P3MS11P2MS51
5W-30 10W-305W-20
Quart UPC CodeCase UPC CodeCase SCC-14 Code
0-74804-02031-1
0-74804-14072-9
1-00-74804-04072-9
0-74804-02035-9
0-74804-14073-6
1-00-74804-04073-6
0-74804-02033-5
0-74804-14071-2
1-00-74804-04071-2
5W-30 10W-305W-20
Test (Method)
SAE Viscosity GradeAPI ClassificationILSAC
Quart Part Number
5W-30SNGF-5
P3MS576
10W-30SNGF-5
P3MS176
5W-20SNGF-5
P2MS576
35.6242.718.061650.83-51˚C224˚C13.8
P2MS01
0W-20
0-74804-03474-5
0-74804-14070-5
1-00-74804-04070-5
0W-20
0W-20SNGF-5
P2MS076
PRODUCT SHIPPING INFORMATION:
HANDLING AND SAFETY INFORMATION Refer to Old World Industries Material Safety Data Sheet (MSDS).The MSDS is available from your PEAK Performance Supplier at www.peaklubricants.com, or by callingOld World Industries’ PEAK technical support line at 1-800-477-5847.
5 Quarts P3MS55 P3MS15P2MS55P2MS05
Pack/Units Per CaseCubic FeetCase DimensionsCases Per Pallet
6/1 Quart.40 cu Ft.9.5” L x 7.6” W x 9.6” H138
Pallets/Cases Per TruckUnits Per TruckPallet SizeCases/Rows High
24/331219,87248” L x 40” W x 62.6” H23/6
5W-30* 10W-305W-200W-20
55 gallon 450 lbs. 1,850 lbs. 4 drums 84 drumsDrums 21
PACK UNITWEIGHT
PALLETWEIGHT*
UNITSPER PALLET
UNITSPER TRUCKUNIT PALLETS
PER TRUCK
(*) Including pallet at 50 lbs. each
Pack/Units Per CaseCubic FeetCase DimensionsCases Per Pallet
3/1 (5) Quart
.98 cu Ft.
15.1” L x 8.5” W x 13.192” H
52
Pallets/Cases Per TruckUnits Per TruckPallet SizeCases/Rows High
24/1248
3,744
48” L x 40” W x 58.398” H
13/4