name - · pdf filename: ultratest pty ltd address: ... and or cwsip (uk) membership: welding...
TRANSCRIPT
NAME: Ultratest Pty LtdADDRESS: Unit 2, 76 Playne Street Frankston, Victoria, 3199TELEPHONE: Business Hours: Mobile: 0448 982 259Fax: (03) 9781 3394Email: [email protected]
ESTABLISHED: 1984
DIRECTOR: Paul F. Kelly
GENERAL MANAGER: Grant Kelly
ADMINISTRATIVE MANAGER: Susan Kelly
TECHNICIANS: P. Kelly, G. Kelly,C. Brownlee, H. Ridley
QUALIFICATION: NATA registered for the following tests:
6.31 Ultrasonic Examination of Ferritic Steels.01 Flat Rolled Products.02 Welded Joints.03 Castings.04 Forgings.05 Butt welds in rail sections.06 Semi finished rolled products.07 Other Rolled Products
6.32 Ultrasonic Examination of Aluminium Alloys.02 Welded Joints.03 Castings
6.33 Ultrasonic Examination of Austenitic Stainless Steels.02 Welded Joints
6.34 Ultrasonic examination of clad steels.11 Welded joints in clad steels
6.39 Ultrasonic Examination of Other Non Specified Metals.01 Copper to Steel welds.02 Copper Welds
6.51 Ultrasonic Thickness Measurement
6.52 Ultrasonic Examination of Bonded Metals.01 Machine Bearings.99 Ultrasonic examination of tungsten carbide coatings
6.54 Ultrasonic Examination of Finished Components in Service.01 Screw Threaded Components.02 Gears and Splined Components
Page 2 of 4
COMPANY PROFILE
Ultratest Pty LtdUnit 2, 76 Playne Street Frankston, Victoria, 3199Business Hours: (03) 9781 47990448 982 259(03) 9781 [email protected]
1984
Paul F. Kelly
Grant Kelly
Susan Kelly
P. Kelly, G. Kelly, D. Woodhouse, C. Brownlee, L. Scoble, J. JohnsonH. Ridley
NATA registered for the following tests:
6.31 Ultrasonic Examination of Ferritic Steels
.06 Semi finished rolled products
6.32 Ultrasonic Examination of Aluminium Alloys
6.33 Ultrasonic Examination of Austenitic Stainless Steels
examination of clad steels
6.39 Ultrasonic Examination of Other Non Specified Metals
6.51 Ultrasonic Thickness Measurement
6.52 Ultrasonic Examination of Bonded Metals
.99 Ultrasonic examination of tungsten carbide coatings
6.54 Ultrasonic Examination of Finished Components in Service.01 Screw Threaded Components.02 Gears and Splined Components
Unit 2, 76 Playne Street Frankston, Victoria, 3199
6.61 Magnetic Particle Testing
6.71 Liquid Penetrant Inspection
6.91 Welded joints Visual Inspection
13.90.15 Macroscopic examination of steels13.91.13 Macroscopic examination of wrought products
All tests are carried out by highly trained approved NATA Signatories and all reports are NATA endorsed.Technicians are qualified to AS 3998and or CWSIP (UK)
MEMBERSHIP: Welding Technology Institute of AustraliaInstitute of NonAustralian Institute of NonAustralian Industry Group
BUSINESS: Performance of Non
1. Ultrasonic Testing2. Magnetic Particle Testing3. Penetrant Testing4. Macro Tests5. Visual Tests
Welding Technology1. Welding Engineers2. Weld Procedure Development and Certification3. Welder Qualification Certification
GENERAL INSPECTION:
1. Visual and dimensional inspection of steel fabrication, castings and forgings.2. Inspection of surface treatment.3. Inspection of mechanical items. Machinery, gear boxes, pumps, compressors etc.4. Weld Procedure documentation and review.
NON-DESTRUCTIVEINSPECTION OF:Pipes and PlatesCastingsForgingsPressure VesselsMining EquipmentWelded StructuresRail WeldsAutomotive ComponentsBearing BondingIn Service InspectionCritical Defect Sizing
Page 3 of 4
6.71 Liquid Penetrant Inspection
Macroscopic examination of steels.13 Macroscopic examination of wrought products
All tests are carried out by highly trained approved NATA Signatories and all reports are
Technicians are qualified to AS 3998 / ISO 9712 level 3 and level 2 for all tests with AINDT
Welding Technology Institute of AustraliaInstitute of Non-Destructive Testing U.K.Australian Institute of Non-Destructive TestingAustralian Industry Group
Non-Destructive Examination:
2. Weld Procedure Development and Certificationon Certification
1. Visual and dimensional inspection of steel fabrication, castings and forgings.2. Inspection of surface treatment.3. Inspection of mechanical items. Machinery, gear boxes, pumps, compressors etc.
Procedure documentation and review.
All tests are carried out by highly trained approved NATA Signatories and all reports are
with AINDT
1. Visual and dimensional inspection of steel fabrication, castings and forgings.
3. Inspection of mechanical items. Machinery, gear boxes, pumps, compressors etc.
INSPECTION STANDARDS:
Australian ASUSA ASTMUSA ASMEUSA APIUSA AWSUSA AISCUSA ANSIUK BSUK WI recommendationsUK CEGBGERMAN DINJAPANESE JIS
PROJECT INVOLVEMENT:
The following are some of the projects we have been
Loy Yang B Power StationEssoEsso Malaysia BHPPEPTMajor City Buildings
Eliott EngineeringAberfoyle ResourcesAllco/Boving
Baulderstone HornibrookABB EPT/National RailJohn Holland
SIA John Holland
ADI Engineering
GVP Fabricators
QUALITY ASSURANCE:
We are a NATA accredited NDT testingto ISO /IEC 17025 2005 is required and audited. In the performance of non destructive tests and the production of test reports ISO/IEC 17025 2005 exceeds the requirements of AS 3901 and ISO 9001
Page 4 of 4
The following are some of the projects we have been involved with.
Steel structureVessels for offshore oil productionVessels for offshore oil productionVessels for onshore oil productionAluminium busbar Tomago Smelter333 Collins Street101 Collins Street120 Collins StreetBourke PlaceVic. CentralNew Commonwealth OfficesPenstock barrels for Bogong Power StationCritical sizing of weld defects in sag mill at Hellyer MineDartmouth Dam turbine casing and associated equipmentPipe work on site for BHP Methanol plant AltonaRail track welds Spotswood rail welding facility.Rail track welds Geelong to Serviceston via Maroona and Ararat.Melbourne to WaggaRail track welds Western Australia Warrnambool to South Geelong and Alice Springs to DarwinLarge pressure vessel reactors for Vost-Alpine/BHP project.105 Steel bridge pans for Eastlink Freeway MelbourneFrames, Crusiforms & Plates for Melbourne Rectangular Stadium.
We are a NATA accredited NDT testing laboratory under which a quality assurance system is required and audited.
In the performance of non destructive tests and the production of test reports ISO/IEC 17025 exceeds the requirements of AS 3901 and ISO 9001
Penstock barrels for Bogong Power Stationin sag mill at Hellyer Mine
Dartmouth Dam turbine casing and associated
Pipe work on site for BHP Methanol plant AltonaRail track welds Spotswood rail welding facility.Rail track welds Geelong to Serviceston via Maroona
Warrnambool to South Geelong and Alice Springs to
Alpine/BHP
105 Steel bridge pans for Eastlink Freeway MelbourneFrames, Crusiforms & Plates for Melbourne
laboratory under which a quality assurance system
In the performance of non destructive tests and the production of test reports ISO/IEC 17025