nano ceramic

Protect Your Loved Ones2014.02

Product Features

is a series of new nano-ceramic coating products made by special synthetic nano-ceramic material and rare earth elements. This kind of new coating products possess following features:• Room temperature curing. • Environmentally friendly ， food grade non-toxic, the only zero VOC release coating

product in market.• Nonflammable, A1 level fire-proof material.• Exellent hardness, durability, acid/base tolerance non-discoloring characters as other

ceramic materials. • Inorganic water-based coating product which can combine with cement (other

inorganic materials) to have water-proof, chemical tolerance, self-clean characters.• One-component coating, no need of ripening.• Easy cleaning, easy maintenance. Semipermanent service life.

NANO PAINT

NANO PAINT

Sample 1 ： high strength cement sample, treated by waterproof process with our product. [no descent of water, no color change]

Sample 2 : high strength cement sample, no waterproof treatment. [ The sample had absorbed water and changed color]

渗透 TEST

[sample 1 : water-proof treatment] [sample 2: no treatment 】

1.Waterproof test

NANO PAINT

Picture 1; High strength cement sample (part A: coating treated; part B: without treatment)

Picture 2:The A,B parts were treated by 20% HNO3.After shortly slight reaction, part A turned into a stable state, while part B bubbled with intense reaction and finally be corroded.

Picture 3: After test, part A were slightly discolored without further corrosion and strength lost, but part b were seriously corroded with some sand particles separated out.

Before corrosion After corrosionNitric acid corrosion

B

A

2.Chemical corrosion test

NANO PAINT

通透性 TEST

Picture 1 : High strength cement sample with coating treated.

Picture 2 : Water spray treatment---no permeation.

Picture 3 : Ethanol spray treatment---permeated.

Picture 4 ： Test result revealed that this waterproof coating product is air penetrable, which can improve the durability of the cement base.

3.Permeability test

NANO PAINT

Sample 1:Concrete structure surface turned black because of fungi reproduction.

Sample 2: After MCC coating product treatment, the former black surface had turned color because of fungi reproduction repression.

[sample 1] Fungi reproduction [sample 2] Fungi reproduction were repressed

4.Antimicrobial test

6 Product Classifications

• Transparent wall series• Colored wall series• Floor cement harden series• Colored cement floor series• Imitation stone series• Special cement series

Transparent wall seriesCharacteristics ：1.Transparent film.2.One component coating, no need of ripening or stirring. 3.This coating product can permeate into the concrete base

to fill in the blanks. It can combined with cement to crystalline which have good tolerance ability against corrosion, freezing and avoid re-alkali so as to protect the concrete structure.

4.It is a series of waterproof products with air permeability so that it can be apply to moisture circumstances to prevent base from mildew.

5.High ageing-resistant performance.6.Totally inorganic, non-toxic, A1 level fireproofing.

Applications1.Waterproof, antifouling, anticorrosion

coating for concrete wall.2.Tunnel, bridge protection.3.Natural stone, clay brick protection.4.Ditch, cement duct protection.5.Cultural relic, historical architectural

protection.6.Cement roof.7.Other cement surface.

Construction for transparent wall series

Construction ：1.The base surface should be cleaned up and dry thoroughly before application. 2.Big holes or cracks should be filled up before coating construction.3.Spray, brush or roll the coating on the treated surface. 4.Surface drying only needs a few hours with some of the waterproof effect, but the perfect waterproof

effect would act 3 days after construction, and a dry environment is necessary during this time. 5.Spray water on the surface after a stage of curing to check out the waterproof effect of the coating.

For the less effective parts, an addition coat can be helpful. 6.All the construction concrete should be extremely curing in order to get a good waterproof effect.7.Standard usage ： it is 2.5-3.5 m2/kg depends on the surface situation.

Notes ：1.No need of ripening or attenuation.2.Moisture content of the application surface should below 8%.3.High strength brushing is suggested for the addition coat construction for a good penetration.4.Protective clothing is necessary because of its alkaline character.5.Construction protection is needed to prevent spraying splash. 6.Construcion tools can be washed off by water. The residual coating product should be sealed storage

with the durability of 1 year.7.Normal cement surfaces are all applicable expect the new annexing agent additive types which need

application tests before using.8.This product can not improve the surface hardness or abradability. Relevant demands should adopt

other series of our company.

Project cases of transparent wall series

• Construction date : 2011, 07, 06.• Construction site : edging stone of highway

Compare between before rain and after

after before


3. 시공 사례

Construction date: 2012, 04, 20.Construction site: concrete wall

Treated part Un-treated part

Compare between before rain and after

Colored wall series

Characteristics ：1.Water-soluble matt paint with heat-resistant ability

below 800 . ℃2.It can penetrate into base material for a high

adhesive performance.3.It is a kind of diversity colored paints with

waterproof, air permeable, anticorrosion and self-clean characteristics.

4.High ageing-resistant performance.5.Totally inorganic, non toxic, A1 level fireproofing.

Application 1.Concrete building outer wall.2.Road, bridge.3.Interior decoration.4.Clay brick, inorganic insulation board.5.Other inorganic base materials.

Project cases of colored wall series

Construction of colored wall seriesConstruction ：1.The base surface should be cleaned up and dry thoroughly before application.2.Stirring the paint well to a evenly mixture.3.Spraying is the best method for this coating and rolling is also allowed,4.It needs 1-2 hours for a surface dry, completely solidification needs above 8 hours when re-coat can

be carried on. It takes2-4 days for totally crystallization, long-time water submersion may lead to a bad surface hardness or adhesive performance during this time, once it happened, brushing repair after water wash or hot-blast would be useful.

5.It is not allowed to re-coat the paint after completely crystallization. But if the surface was treated by heat flame above 200 ℃ ， re-coating can be carried on.

6.For the high water absorption base material, re-coating can be carried on after 10-30mins after first coating.

7.Standard usage ： first coating: 30 ㎛ , 0.4kg/ ㎡ , second coating: 20 ㎛ , 0.3kg/ ㎡ . For different base material the usage can be adjusted accordingly.

8.Normal products are all semigloss. High glossy demands refers to special finishing paints.

Notes ：1.It is a kind of water-based paint which needs application temperature above 5 ℃ ， and a dry

environment is necessary before curing.2.Cement base should be completely curing with moisture content under 5%.3.Suggest thickness of construction is between 30-80 μm, too thick coating would lead to surface

crack.

Floor cement harden series

Characteristics ：1. Inorganic water base products.2. Environmentally friendly, food grade nontoxic, the only zero

VOC release coating product in market.3. A1 level fireproofing.4. High hardness (above 750 while the normal cement is about

250) 5. It can combine with cement to form a special molecular

structure which has good waterproofing, anticorrosion, wear-resisting and anti-skidding properties.

6. Easy to be maintenance, semipermanent service time.

Application 1.Factory, mill floor. 2.Logistics warehouse floor.3.Underground parking.4.Parking apron, square, dock.5.Other concrete floor need impact resistance or wear

resistance property.

Project cases for floor cement harden series

Colored cement floor series

Characteristics ：1. This series include primer, medium and finish coatings. They are all two-component

inorganic products.2. No need of ripening but good mixing.3. Chemical resistant, non-discolor, self –clean.4. High surface hardness above 8H.5. Skid resistant, wear-resisting (abrasion loss is only 0.19 while for epoxy it is 0.3) 6. Noiseless under vehicle wheel spreading, and it is anti-static.7. Nontoxic, A1 level fireproofing.

Application 1. High demand manufacturing floor like electronic, food

factory.2. Public place like classroom, kindergarten, supermarket. 3. Kitchen, rest room, terrace and swimming pool.

Project cases for colored floor cement series

Imitation stone series

Characteristics ：1.High imitation effect with the same pattern and texture with natural stone.2.Inorganic mineral substance pigment, no discolor under long time outside expose. 3.High strength ceramic topcoat with self-clean property.4.Classified to granite, travertine, sandstone and marble.5.Easy to be constructed.(200-300 square meters per worker)6. Replace the natural stone with 1/500 of its weight and 20-30% of its cost.

Application 1.Outer wall of High-rise building.2.Villatic outer wall.3.Old building modification (Construct directly

on the old stone materials).4.Corridor and elevator room. 5.Television,bar counter background wall.6.Wall and cylinder of underground parking. 7.Plaza decoration.8.Insulation board decoration and protection.

Project cases of imitation stone series

Special cement series

Characteristics ：1. It is a kind of cement addition powder made of

CaSiO3 、 SiO2 、 Al2O3 and rare earth elements. 2. High adhesion strength, good skid resistance and

impact resistance properties.3. Long time service life, the same as cement structure.4. Easy to be construct, low cost.5. Diversity colored, nontoxic.

Application1. Factory, logistic warehouse, parking lot, gas

station. 2. Heavy industry workshop. 3. Airport, plaza, dock.4. Military installation ground projects.

• Standard usage ： 7—9 kg/m2 (fist layer: 6—7 kg, second layer: 1—2 kg)

Project cases of special cement series

Thank you ！Show someone you care, (before it’s too late)

ARCH. CRISTINA ANG63 917 792

6322

GOLDEN PLATINUM MKTG CORP.