nanofan presentation 121117

w w w . n a n o f a n c o . c o m

Company Profile

NANOFAN Industrial Coatings was founded in 2007, as one

of the leading manufacturer of Paint Insulation in the Middle

East, funds in research with leading laboratories and elite

scientists in the fields of chemicals, polymers, coatings and

Nano science.

Our activities span from exploration and production of Nano

Energy Saving, water-proofing and protective coatings,

accurately follows up the developing step of the industry,

persists in the developing of specialization, Nanotechnology,

and standardization.

Project summary

We are established a factory to produce

Nanotechnology Coatings and Professional

Paints based on 3 patents we have.

Our products are designed to provide Industrial,

Marine and residential paint and coating inquiries

in Oman, GCC and worldwide.

Nanofan Factory

Type of goods handled

We will produce professional paints and

coatings in different application as following:

Thermal insulation,

water proofing,

fire retardant,

traffic paint,

Special decorative paint

Nanofan Factory

Nanotechnology is the manipulation of cell and atomic structure in materials that are no larger than a billionth of a meter in size.

“Science and technology on the scale of a nanometer -one billionth of a meter - is revolutionary.

Nanotechnology could change the way almost everything is designed and made”.

and what is "Nanotechnology"?

The insulating component is NANOISOLA a material wecall Nano Silicasol XL100. Passage of thermal energythrough an insulating material is an attempt by hotter, fastvibrating molecules to transfer energy to cooler, slowvibrating molecules in order to reach equilibrium.

Introduction Our Technology

It occurs in three ways; solid conductivity, gaseousconductivity, and radiative (infrared) transmission. Thetotal of these is the thermal conductivity of the material.Our material, is by far, the world's worst conductor ofthermal energy and the world's best insulator.

Thermal conduction through a material is hindered by the tiny size ofthe connections between the particles making up the conductionpath. The solids that are present consist of very small particles linkedin a three-dimensional network (with many "dead-ends"). Therefore,thermal transfer through the solid portion occurs through a verycomplicated maze and is not very effective. Air and gas in thematerial can inherently also transport thermal energy, but the gasmolecules within the matrix experience that is known as theKnudsen Effect and the exchange of energy is virtually eliminated.Conduction is limited because the "tunnels" are only the size of themean-free path for molecular collisions, smaller than a wave of light.Molecules collide with the solid network as frequently as they collidewith each other.


Knudsen Effect

The unique structure... nanometer-sized cells, pores, andparticles, means poor thermal conduction. Radiativeconduction is low due to small mass fractions and largesurface areas.


Thermal Conductivity Factor

NANOISOLA Product Rang

NanoIsola Industrial- NINanoIsola Waterproofing- NWNanoIsola Residential - NR

NanoIsola Traffic- NT NanoIsola Decorative- ND NanoIsola Fire Retardant -NF

NANOISOLA Product RangNANOISOLA coatings are a grand breaking product byNANOFAN Industrial Coatings that utilize a nanocompositewith an extremely low thermal conductivity and hydrophobicnature. This material allows the coatings to effectively inhibitheat transfer with a thin layer, while also providing otherperformance benefits such as:

Moisture resistanceUV resistanceMildew & Mold resistance Non-toxic, low VOCNon‐flammable insulationDurability in extreme environments

Technical Process

NANOISOLA is a hydrophobic, environmentally-safe

and liquid form of insulation that can be PAINTED on

most surfaces with a thickness of less than a

millimeter for greater thermal resistance over

traditional insulation.

Normal Coating NANOISOLA Coating

Technical Process

NANOISOLA technologies and products are some of

the world’s most advanced and simple to use energy

saving technologies available. All NanoIsola products

are designed to be environmentally safe and easy to

apply by simply coating the substrate with a thin layer

of material which paint has overturned the underlying

interpretation of insulation

Normal Coating NANOISOLA Coating

NANOISOLA Residential

NANOISOLA Residential - NR

NANOISOLA Residential - Benefits

Energy Saving –

Resistant to growth of mold, mildew, bacteria, algae

Weathering Resistance - Protects roof and exterior

walls from the elements

Environmentally Friendly - Low VOC (100 g/L)

water-based, non-toxic, non-flammable

Easily Applied

Excellent UV resistance to reduce fading Clear paint is also available - Allows the beauty of the

underlying surface to remain intact Can be tinted if desired Breathable Long-term performance and protection 5-year warranty

NANOISOLA Residential - Benefits

NANOISOLA Residential - Uses

Commercial

Residential

Industrial

Interior Walls

Exterior Walls

Ceilings

Attics

Basements

Roofs

Mobile Homes

Sheds

Metal Buildings

NANOISOLA NR– Data Sheet

NANOISOLA Residential

1-part water-based insulation coating forResidential & Commercial applications overwalls, ducts, ceilings, skylights or windows

Can be tinted to your colors desired. Clear isalso available - Allows the beauty of theunderlying surface to remain intact

Benefits include: thermal insulation, Moistureresistance, UV resistance, Mildew & Moldresistance, Non-toxic, low VOC, Non‐flammableinsulation, Durability in extreme environments.

Typical application: 3 coats – 0.2 mm

Unit Price

1 Gallon 3.79 liter

OMR 5$ 14

5 Gallon 18.93 liter

OMR 25$ 70

NANOISOLA Waterproofing

NANOISOLA Waterproofing- NW

Insulating and waterproofing roofs, bathrooms and building

facades

It has both the properties of insulation and waterproofing at the

same time

Water-based paint, with No solvent

NANOISOLA Waterproofing - Benefits

Environmentally friendly

Thermal resistance from 40° to 210° C

High flexibility

Long lasting, durable for at least 20 years

Water resistant, water hydrant & protective against rain, damp,

moisture

UV Resistance

High resistance to different weather conditions

NANOISOLA Waterproofing - Benefits

No need to remove the previous existing surface

Easy to use (brush, roller, spray)

Competitive price with similar products in the market.

Applicable on any surface.

Pools, Roofs, Bathrooms and Building Facades

Applicable on any surface, even the ones that already exists.

Water proofing the foundation of a building

Sealing sauna, Jacuzzi and parts in contact with damp

Isolating and water proofing walls, buildings and gable roof

NANOISOLA Waterproofing - Uses

NANOISOLA NW– Data Sheet

NANOISOLA Waterproofing

1-part water-based Isolating and water proofingcoating for roofs, bathrooms and buildingfacades, sealing pools, sauna, Jacuzzi and partsin contact with damp.

It has both the properties of insulation andwaterproofing at the same time

Benefits include: thermal insulation, energysavings, works in all seasons, resistant to moldand mildew growth, and excellent UV andmoisture resistance.

Typical application: 3 coats – 0.6 mm

Unit Price


OMR 30$ 80

NANOISOLA Industrial

NANOISOLA Industrial- NI

NANOISOLA Industrial- Benefits

Outstanding thermal & insulation properties.

Easy application with brush, roller or paint sprayer.

Non-toxic, water-based.

Outstanding durability with excellent adhesion to steel, aluminum,

galvanized aluminum and many more substrates.

Cost effective, with long-term savings and short payback period.

Low VOC

Breathable (perm rating: 5 perms/Inch @ 23 deg. C)

NANOISOLA Industrial - Features

Excels in providing thermal insulation in a thin layer up to 150 C.

Space saving – each coat is applied at 500 microns.

Can be painted over.

Provides protection from harmful UV rays.

Ideal pipe insulation and rust inhibitor - increase energy efficiency.

Easily applied by maintenance crews.

Spray insulation allows insulating of all equipment sizes and

shapes.

NANOISOLA Industrial - UsesCan be applied on:

HVAC

Pipelines

Valves & Flanges

purification vessels

Food Processing

Volatile Storage Tanks

Manufacturing Equipments

Storage & Processing Tanks

Petroleum & Chemical Refining

NANOISOLA NI– Data Sheet

NANOISOLA Industrial

1-part water-based insulation coating forsurfaces up to 160°C applied on Hot WaterPipes, Processing Tanks, Boilers, HVAC & …

Excellent thermal insulation in a thin film coating Reduces surface temperature of hot pipes and

equipment Exhibits outstanding durability with excellent

adhesion to aluminum, steel, copper and … Benefits include: thermal insulation, corrosion

prevention, chemical resistance, abrasionresistant & personnel protection

Typical application: 1-6 coats - 0.5 up to 3 mm

Unit Price


OMR 35$ 90

NANOISOLA Industrial – Solution for Corrosion

Because of the complex and often corrosive environments in

which plants operate, corrosion has been a serious problem,

with a significant impact on the operation.


‘Corrosion under insulation is difficult to findbecause of the insulation cover that masks theproblem until it is too late.’

Corrosion under insulation is a real threat to the on-stream

reliability of many of today’s plants. This type of corrosion

can cause failures in areas that are not normally of a primary

concern to an inspection program. The failures are often the

result of localized corrosion and not general wasting over a

large area. These failures can be catastrophic in nature or at

least have an adverse economic effect in terms of downtime

and repairs.


‘Corrosion under insulation is difficult to findbecause of the insulation cover that masks theproblem until it is too late.’

Corrosion under insulation is difficult to find because of the

insulation cover that masks the problem until it is too late. It

is expensive to remove the insulation, particularly if asbestos

is involved. There are a number of methods used today to

inspect for corrosion under insulation. The main ones are

profile radiography, ultrasonic spot readings, and insulation

removal.


NANOISOLA offers the benefit of a combinationcorrosion prevention coating and insulation in a singleproduct. The Nano-Composite in NANOISOLA has alow thermal conductivity (0.068 W/mK) and is alsohydrophobic, which gives the product the dual ability ofresisting corrosion.

NANOISOLA offers the only clear coating that preventsCUI and allows visual and ultrasound inspectionswithout need for removal, thus saving downtime, cost ofreplacement, and personnel time.

How Does NANOISOLA Prevent Corrosion & CUI?

The effectiveness of NANOISOLA in preventing Corrosion UnderInsulation (CUI) while providing excellent thermal insulation wasdifficult to create… but it is easy to explain.

First:Hydrophobic refers to the tendency of a substance to repel water. Thenanocomposite which constitutes approximately 70% of the dry filmthickness of Nansulate is highly hydrophobic.

Due to the fact that NANOISOLA adheres directly to the substratebeing insulated, it coats the substrate with the hydrophobic particleswhich act to continuously repel any attempt at moisture build-up andno moisture means excellent rust prevention and corrosion protection.

How Does NANOISOLA Prevent Corrosion & CUI?

Second: NANOISOLA adheres directly to the substrate, bonding with it. There is no space for air and the life giving oxygen that rust needs to grow.

PLUS: The hydrophobic performance characteristic of the nanocomposite in NANOISOLA also repel moisture from the coating itself, effectively creating a moisture free barrier against the pipe or tank or piece of equipment being insulated. The severe service environments of coastal or offshore facilities, with the constant salt air and salt spray can destroy equipment rapidly. The hydrophobic performance qualities of NANOISOLA repel the attempt by salt water to penetrate through to the substrate, preventing rust and corrosion caused by the severe service conditions encountered by petroleum refineries, supertankers, and many other industrial facilities.

NANOISOLA Industrial Use

Pipelines

Production & Manufacturing Salons and Warehouses

Storage & processing Tanks


Food, Sugar & Dairy Industry: Storage Tanks - Processing Equipment - Pipeline

Food, Chemical & Petroleum Refining : Valves & Flanges


Purification Vessels & Processing Equipment

Silos


More Information

w w w . n a n o f a n c o . c o m

nanofan presentation 121117

Documents