natco/carlton spindles - lucas precision · 2020. 11. 26. · natco/carlton spindles for all of...

NATCO/Carlton Spindles for All of Your Multiple

Spindle Drilling and Tapping Applications

"THE RIGHT THING TO DO'

In 190 I, NATCO built the first multiple spindle drilling and tapping machine. These machines are known around the world for their strength and durability These years of leadership have taught us a great deal about Quality Materials and Good Workmanship.

We at NATCO/Carlton have carried these qualities into today's world. We never skimp on material or workmanship.

The NATCO/Carlton Universal Joint as an example, has a solid, one piece trunion block to give added strength. It is also heat treated to give added durability. The drive sides are a matched pair, and they are induction hardened. This is the only Universal in the industry with these quality parts.

The result is a part that lasts longer and is more reliable. Our customers tell us that NATCO/Carlton spindle parts outlast others by "a country mile".

So, use NATCO/Carlton O.E.M. equipment in all your multiple spindle drilling and tapping applications.

"THE RIGHT THING TO DO".

How To Use Ths Catalog

We have prepared this catalog to make it easy for you to find the parts you need. By using the Table of Contents on the next page, you can find the type of part you are looking for by page number. If you do not find your particular part, call one of our experienced sales representatives. He will be happy to assist you.

You'll find schematic drawings, specifications, and tables of part numbers for hundreds of NA TCO/Carlton spindle and spindle accessories in this catalog.

The drawings will show you where to find your part in the tables. The tables will give you the part number you need.

A call or fax to one of our sales representatives will provide you with current pricing and availability of the part you need.

This same sales representative can help you in the selection of the part needed, or with any questions you may have in relation to your application. He can also help you with O.E.M. parts for the repair of your NATCO machine should this be necessary.

It is always important to have the serial number of the machine handy when calling. This helps to ensure that you are getting the correct part for your machine. The last page in this catalog provides space for recording important machine information.

THANK YOU

Table of Contents

Product Description

Arm Type Spindle Assemblies (Tool Holder Required)

Arm and Adjustable Spindle Type Assemblies (Taper Spindle Nose) Drill Only Drill and Tap

Cartridge Type Spindle Assemblies (Tool Holder Required) Drill Only -- 5 5/8" Slip Plates Drill and Tap -- 5 5/8" Slip Plates

Drill Only -- 4 114" Slip Plates Drill and Tap --4 1/4" Slip Plates

Tool Holders Adjustable Adaptors and Assemblies Adjustable Extension Adaptors

Floating Tap Holders

Tapered Collets For Holding Tanged Straight Shank Drills For Holding Square Shank End Taps

Universal Joints

Upper Drive Assemblies

Lower Drive Assemblies

Blank Slip Plates for Cartridge Type Spindle Assemblies

"T" Bolts for Spindle Assemblies

Spindle Sleeves, Wrenches, Spindle Lock Screw

Spindle Extension Sleeves

Customer Machine Information

3

Page(s)

4 -- 11

12 -- 19 20 -- 27

28 -- 29 30 -- 33

34 -- 35 36 -- 37

38 -- 39 40 -- 41

42 -- 43

44 -- 58 59

60

61 -- 63

64 -- 69

70 -- 71

72

73

74

75

DIM. A B C D E F G H

I

J K

Arm Type Spindle Assemblies Adjustable Tool Holder Required

Specifications

c 1"1 ,...~ , , 1= == 1 II II II II II II

II II

1 jl It II II , , II II tJ I, II I, 1\ II I t--. TH D ".. \ r::=- i- +

: : h T\.~" lil A ~~l -*-0£ I' I " ,I 1 ...L:.. -r ¥=- ~~ I. .1 1'" K. / \ / G F , .' H Il-l-l 1~'----------I------------~

" " "SPINDLE NOSE DIAMETER .. /" '." ,;; '{cffDESCRIPTION -'~ , "' -'; < :"" , '" "'.625" ,. ' ,!, .750 >':875 ""'", '" '1.125

Spindle Nose Length' 2,50 3,75 4.00 4.25 Spindle Nose Bore Diameter .375 .500 .625 .625 Joint End Diameter .312 .437 .437 .562 Spindle Length from Head' 8.50 9.75 10.00 10.25 Arm HeiQht 3.90 3.90 3.90 3.90 Arm Width 1.50 1.50 1.50 1.50 "T" Bolt Slot Width 1.00 1.00 1.00 1.00 Maximum Distance 10" Arm 9.56 9.32 9.42 9.25 Between "T" Bolts 14" Arm 13.56 13.32 13.42 13.25 -

18" Arm 17.56 17.32 17.42 17.25 Centerline of Spindle 10" Arm 12.69 12.50 12.50 12.50 to End of Arm 14" Arm 16.69 16.50 16.50 16.50

18" Arm 20.69 20.50 20.50 20.50 Minimum Center Distance .68 .81 .94 1.18 Offset-RiQht & Left Arms 1.56 1.74 1.74 1.74

'LONGER LENGTHS AVAILABLE--ASK OUR SALES REPRESENTATIVE FOR INFORMATION

4

DIM. A B C D E F G H

I

J K


Specifications

c , ,

2::

D .-+-. + \

t~ (i\, :: ,~ J...:... + \L- G F I \'11 I-IO---

1

-__ H _____ ._+I

, SPINDLE NOSE DIAMETER .... ".; ,

DES'GRfPTION . . / .,' 1.375 1.625 ' 2.125 . '2.625

Spindle Nose LenQth* 5.00 5.25 6.75 8.25 Spindle Nose Bore Diameter .875 1.062 1.375 1.875 Joint End Diameter .743** .875*' 1.125" 1.375** Spindle Length from Head* 11.00 11.25 12.75 16.50 Arm Height 3.90 3.90 5.50 5.50 Arm Width 1.50 1.50 2.12 2.62 "T" Bolt Slot Width 1.00 1.00 1.50 1.86 Maximum Distance 10" Arm 9.20 9.21 9.25 --~--------------Between "T" Bolts 14" Arm 13.20 13.21 13.25 12.72

18" Arm 17.20 17.21 17.25 16.72 Centerline of Spindle 10" Arm 12.50 12.50 13.50 .---------_ .. -----to End of Arm 14" Arm 16.50 16.50 17.50 17.98

18" Arm 20.50 20.50 21.50 21.98 Minimum Center Distance 1.44 1.68 2.18 2.68 Offset-Right & Left Arms 1.74 2.00 3.00 3.50

'LONGER LENGTHS AVAILABLE--ASK OUR SALES REPRESENTATIVE FOR INFORMATION '*OTHER JOINT END DIAMETERS AVAILABLE--ASK OUR SALES REPRESENTATIVE

5


Straight Arm----Part Numbers

10 9 8

6,7

5

4

3

2 N D

t y-"OintEnd Diameter ,

.:"

~ " " " , , I' )1 I' I' .: I: ~ 'I b..-. " I, I) 11 H .-----~-

(::''1

-- ~~t .' . • ' l -?"e _ " . 12 " , lamctcr IL!. -l L Nose 1I0re I Diameter

1

J 13,14,15

SPINDLE N0SEDIA. ,

.625 .. .. ,; .• 750 .875 ~,' ", . , . 1.125 ..

SPINDLE NOSE BORE DIA. ~i ' ,

.375 " .500 ' ' .625 .625

JOINT END'j,illJA. .312 " . .437 .437 , '.562

ITEM DESGRIPTION , PAR:r:'NUMBER ' PARl'NUMBER PAR': NUMBER' 'PART NUMBER

Complete 10" Arm LX-70523-250 LX-73733-375 LX-74816-400 LX-7 4827 -425

1 Spindle & Arm 14" Arm LX-70524-250 LX-73711-375 LX-74817-400 LX-74828-425

Assembly 18" Arm LX-70525-250 LX-73767-375 LX-74818-400 LX-74829-425

2 Spindle Only LX-82960-250 X-73263-375 X-65219-400 X-65229-425

3 Thrust Bearing X-14692 OB-410 X-1361 X-1374

4 Bushing/Needle BearinQ X-74418-1 X-74418-3 X-74775-20 X-74775-34

5 Bushing/Needle Bearing X-65252-11 X-64252-12 X-74775-20 X-74775-34

6 Rear Thrust BearinQ X-74125-3 X-65273-4 X-65273-2 X-65356-1

7 Washer ----------------------- X-65272-4 X-65272-2 -----------------------8 Lock Nuts (2 Req'd) X-44703 OB-408 OB-408 OB-508

9 Woodruff Kev SM-1090 SM-1098 SM-1098 SM-1100 10 Detent Spring X-68306-2 X-65266-1 X-65266-1 X-65266-2

11 Grease Fitting SM-1971 SM-1971 SM-1971 SM-1971

12 Set Screw SM-6604 SM-6633 SM-6633 SM-6662

13 10" Arm Only X-71017-2 X-73715-2 X-65311-2 X-65321-2 14 14" Arm only X-71017-3 X-73715-3 X-65311-3 X-65321-3

15 18" Arm On Iv X-71017-4 X-73715-4 X-65311-4 X-65321-4

6


Straight Arm----Part Numbers

10 9 8

6,7

5

4

3

2 N D

t ~iJOintEnd Diameter

-)

"'" ~ " - " " II ,I 1\ II II I' II E: I:

b-.... ~ " I, I, 11

~* ___ -J! f='-" .. -- ....

.-A , , " L ose _ ~or " , '- 12

iamctcr " , lL!. .-J I- Nose Rorc I Diameter

1

1 13,14,15

SPINDLE NOSE DIA. 1.375 1.625 c , 2:125 . .

SPINDLE NOSE BORE DIA. ..... .875 '1.062 1.375 JOINT ENDIDIA. .743 :875 1.125 •

ITEM DESGRIPTION PART NUMBER PART NUMBER . PART NUMBER

Complete 10" Arm LX-74838-500 LX-74854-525 LX-74876-675 1 Spindle & Arm 14" Arm LX-74839-500 LX-74855-525 LX-74877-675

Assembly 18" Arm LX-74841-500 LX-74856-525 LX-74878-675

2 Spindle Only X-65239-500 X-65249-525 X-65259-675

3 Thrust Bearing X-1391 X-1413 X-1425

4 Needle Bearing X-74775-47 X-74775-57 X-74775-68

5 Bushing/Needle Bearing X-74775-47 X-74775-57 X-74775-68

6 Rear Thn,tst Bearing X-74125-8 X-65356-3 X-65356-4

7 Washer ----------------------- --------_ .. ------------. -----------.-----------8 Lock Nuts (2 Req'd) OB-608 OB-708 OB-891 9 Woodruff K~y_ SM-1112 SM-1112 SM-1122 10 Detent Spring X-65266-3 X-65266-4 X-65266-5 11 Grease Fitting SM-1971 SM-1971 SM-1971 12 SetScrew SM-6662 SM-6662 SM-6668

13 10" Arm Only X-74797-2 X-65341-2 X-65351-2 14 14" Arm only X-74797-3 X-65341-3 X-65351-3

15 18" Arm Onlv X-74797-4 X-65341-4 X-65351-4

7

2.625·

1.875 1.375

. PART NUMBER

----~------------------

LX-74814-825 LX-74897-825 X-68429-825

X-5146 X-74775-83 X-74775-83

-----------------------OB-909 OB-908

SM-1136 X-65266-6 SM-1971 SM-6668

-----------------------X-74790-3

X-74790-4

Arm Type Spindle Assemblies Adjustable Tool Holder Required Right Offset Arm----Part Numbers

10 9 8

• -)

vi,ointEnd Diameter

6,7

5

4

3

2 N D

-

---ose ~_ iameter

"" ~ " " " , , " , , " , , t: I , , II I,

~ ~ " II I, 11 H f:'.."'\ .. --~ ~or " , " L -" , 12 " , ~ ~ I- Nose Bore I Diameter

SPINDLE NOSE DIAMETER " , .625 • . ~ SPINDLE NOSE HOLE DIA; , . .375 ';" ,

JOINT END,OIAMETER .312 ITEM DES~RIPTION . 'PART NUMBER

Complete 10" Arm LX-71 019-250 1 Spindle & arm 14" Arm LX-71 020-250

Assembly 18" Arm LX-71021-250 2 Spindle Only LX-82960-250 3 Thrust Bearing X-14692 4 Bushing/Needle Bearing X-74418-1 5 Bushing/Needle Bearing X-65252-11

6 Rear Thrust Bearinq X-74125-3 -7 Washer

NM _____________________

8 Lock Nuts (2 Reg'd) X-44703 -9 Woodruff Kev SM-1090 10 Detent Spring X-68306-2 11 Grease Fitting SM-1971 12 SetScrew SM-6604 --- -. 13 10" Arm Only X-70983-2 14 14" Arm onl~ X-70983-3 15 18" Arm Onlv X-70983-4

1

J 13,14,15 0

,.~ ~ .750 ~.' .875 •• 'J'

i ~,~ .• 500 .625 .437 .437

PART NOMBER PART NUMB'ER. I LX-73763-375 LX-74819-400

LX-73762-375 LX-74820-400 LX-73761-375 LX-74822-400 , X-73263-375 X-65219-400

OB-410 X-1361 X-74418-3 X-74775-20 X-64252-12 X-74775-20 X-65273-4 X-65273-2 X-65272-4 X-65272-2

I OB-408 OB-408 ---SM-1098 SM-1098

X-65266-1 X-65266-1 SM-1971 SM-1971 SM-6633 SM-6633

X-73713-2 X-65312-2 X-73713-3 X-65312-3 X-73713-4 X-65312-4

8

1.125 ~ .625

.562 PART NUMBER

LX-74830-425 LX-74831-425 LX-74833-425 X-65229-425

X-1374 X-74775-34 X-74775-34

X-65356-1 -----------------------

OB-508

SM-1100 X-65266-2 SM-1971 SM-6662

X-65322-2 X-65322-3

X-65322-4

Arm Type Spindle Assemblies Adjustable Tool Holder Required Right Offset Arm----Part Numbers

10 9 8

6,7

5

4

3

2 N D

t V-!OintEnd r\ Diameter ise Bore r· Diameter

SPINDLE NOSE DIAMETER 1.375

SPINDLE NOSE HOLE DIA. .875 JOINT END/OIAMETER .743 ITEM OESCRIPTION PART NUMBER

Complete 10" Arm LX-74842-500 1 Spindle & arm 14" Arm LX-74843-500

Assembly 18" Arm LX-74845-500 2 Spindle Only X-65239-500 3 Thrust Bearing X-1391 4 Needle Bearing X-74775-47 5 BushinQ/Needle BearinQ X-74775-47 6 Rear Thrust Bearing X-74125-8 7 Washer -----------------------8 Lock Nuts (2 Req'd) OB-60S

9 Woodruff Key SM-1112 10 Detent SprinQ X-65266-3 11 Grease Fitting SM-1971 12 Set Screw SM-6662

13 10" Arm Only X-7479S-2 14 14" Arm only X-74798-3

15 1S" Arm Onlv X-7479S-4

1

J 13,14,15 0

1.625 2.125

1.062 1.375 .875 1.125

PARTNUMBER PART NUMBER

LX-74862-525 LX-74892-675 LX-74863-525 LX-74893-675 LX-74864-525 LX-74894-675 X-65249-525 X-65259-675

X-1413 X-1425 X-74775-57 X-74775-68 X-74775-57 X-74775-68

X-65356-3 X-65356-4

----------------------- -----------------------OB-70S OB-891

SM-1112 SM-1122 X-65266-4 X-65266-5 SM-1971 SM-1971 SM-6662 SM-6668

X-65342-2 X-65352-2 , X-65342-3 X-65352-3

X-65342-4 X-65352-4

9

2.625 . 1.875

1.375 'PART NUMBER

------------------.----LX-74900-825

LX-74901-525 X-68429-825

X-5146 X-74775-83 X-74775-83

-----------------------OB-909 OB-908

SM-1136 X-65266-6 SM-1971 SM-6668

-----------------------X-74789-3

X-74789-4

10 9 8

Arm Type Spindle Assemblies Adjustable Tool Holder Required Left Offset Arm----Part Numbers

t 1 v-~OjntEnd Diameter , , ...

6,7

5 - ~ : , , " , , " , , " , , I: I , , " ' :b... -~ : , 11 ~

4

3

2 N D

__ -_-.1

f=-""'l .. -- .... --- ~ot " ,

" l ?Se - " , 12 " , lamctcr LL.!.

-l I- Nose Horc I Diameter

.1. 13,14,15

0 61==~

SPINDLE NOSE DIAMETER .625 .750 .875 ~ 1.12ii-

,

SPINDLE NOSE BORE DIA. .375 .500 .625 .625

JOINT END DIAMETER .312 :437 .437 .562

ITEM DESCRIPTION PART NUMBER PART NUMBER PART NUMBER PART NUMBER

Complete 10" Arm LX-70986-250 LX-73760-375 LX-74823-400 LX-74834-425 1 Spindle & Arm 14" Arm LX-70987-250 LX-73759-375 LX-74824-400 LX-74835-425

Assembly 18" Arm LX-70988-250 LX-73758-325 LX-74826-400 LX-7 4837 -425 2 Spindle Only LX-82960-250 X-73263-375 X-65219-400 X-65229-425

3 Thrust Bearing X-14692 OB-410 X-1361 X-1374



6 Rear Thrust Bearing X-74125-3 X-65273-4 X-65273-2 X-65356-1 7 Washer ----------------------- X-65272-4 X-65272-2 --------_ .... ------------8 Lock Nuts (2 Req'd) X-44703 OB-408 OB-408 OB-508 9 Woodruff Key SM-1090 SM-1098 SM-1098 SM-1100 10 Detent Spring X-68306-2 X-65266-1 X-65266-1 X-65266-2 11 Grease Fitting SM-1971 SM-1971 SM-1971 SM-1971 12 Set Screw SM-6604 SM-6633 SM-6633 SM-6662

13 10" Arm Only X-70984-2 X-73714-2 X-65313-2 X-65323-2 14 14" Arm onl~ X-70984-3 X-73714-3 X-65313-3 X-65323-3

15 18" Arm Onlv X-70984-4 X-73714-4 X-65313-4 X-65323-4

10

10 9 8

6,7

5

Arm Type Spindle Assemblies Adjustable Tool Holder Required Left Offset Arm----Part Numbers

• 1

V!OintEnd Diameter , ,

"='

~ I, "

" II ,I I' I' II ,I ,I

': ': ~ !!: " II " 11 4 3

2 N D

---OSC _ iamctcr

~. f':-""I ~- .... ~or " , " L " , " , .!L.!.

J 13,14,15

12 0 6)==)

SPINDLE NOSE DIAMETER 1.375 . . ··1.625 , 2:125 ' 2.625 SPINDLE NOSE BORE DIA. . , .875 , 1.062 '1 :375 1.875 JOINT ENOlDIAMETER .743 • .875 1.125 . 1.375 ITEM DESGRIPTION . PART NUMBER PART NUMBER PART NUMBER' PART NUMBER

Complete 10" Arm LX-74846-500 LX-74870-525 LX-74888-675 -----------------------1 Spindle & Arm 14" Arm LX-74847-500 LX-74871-525 LX-74889-675 LX-74904-825

Assembly 18" Arm LX-74849-500 LX-74872-525 LX-74890-675 LX-74905-825 2 S~indle Only X-65239-500 X-65249-525 X-65259-675 X-68429-825 3 Thrust Bearing X-1391 X-1413 X-1425 X-5146 4 Bushing/Needle Bearin(L X-74775-47 X-74775-57 X-74775-68 X-74775-83 5 Bushing/Needle Bearing X-74775-47 X-74775-57 X-74775-68 X-74775-83

6 Rear Thrust Bearina X-74125-8 X-65356-3 X-65356-4 -----------------------7 Washer ---------.--.---------- ----------------------- ----------------------- OB-909 8 Lock Nuts (2 Req'd) OB-608 OB-708 OB-891 OB-908

9 Woodruff Key SM-1112 SM-1112 SM-1122 SM-1136 10 Detent Spring X-65266-3 X-65266-4 X-65266-5 X-65266-6 11 Grease Fitting. SM-1971 SM-1971 SM-1971 SM-1971 12 Set Screw SM-6662 SM-6662 SM-6668 SM-6668 13 10" Arm Only X-74799-2 X-65343-2 X-65353-2 -----------------------14 14" Arm only X-74799-3 X-65343-3 X-65353-3 X-74788-3 15 18" Arm Only X-74799-4 X-65343-4 X-65353-4 X-74788-4

11

K

Arm and Adjustable Spindle Assemblies For Drilling Only Specifications

of Arm of Arm to Groove)

'OTHER TAPERS ARE AVAILABLE--ASK OUR SALES REP ATIVE FOR INFO "2" ARM HEIGHT AVAILABLE--ASK OUR SALES REPRESENTATIVE FOR INFORMATION

12

I

Arm and Adjustable Spindle Assemblies For Drilling Only

Specifications

M!-,~J-l +7.' /)1(;1 ( i) it IV! I I

\ ..... .1 H

~ ~~, SPINDLE NOSE DIAMETER ,

~::;: ~ ! ~

DIM DESCRIPTION 1 '1.375 '; 1.625· . 2.125 :. 2.625 A Standard Taper #3 M.T" #3 M.T" #4 M.T" #4 M.T" B Joint End Diameter .743*** .875'" 1.125'" 1.315'" C End of Spindle to Head Flange (Max) 10.25 10.37 14.00 15.50 D End of Spindle to Head Flang~ (MaxL 11.25 11.87 15.50 17.00 E Spindle Bearing Length 5.25 5.25 7.50 8.50 F Bearing Key Width .875 .875 1.125 1.250 G Arm Height 3.88 3.88 5.62 5.62 H Arm Width 1.50 1.50 2.25 2.50 I "T" Slot Width .75 .75 1.00 1.00 J Maximum Distance 10" Arm 6.20 6.20 5.25

_w ___ ~ _______ R_~

Between "T" Bolts 14" Arm 10.20 10.20 9.25 8.75 18" Arm 14.20 14.20 13.25 12.25

K Lenath of Arm 10" Arm 10.38 10.38 10.38 ... w ____________ M~

-(End of Arm to Groove) 14" Arm 14.38 14.38 14.38 13.56

18" Arm 18.38 18.38 18.38 17.56 L Minimum Center Distance 1.44 1.68 2.18 2.68 M Offset-Right and Left Bearinas 1.75 2.00 3.00 3.50

'OTHER TAPERS ARE AVAILABLE--ASK OUR SALES REPRESENTATIVE FOR INFORMATION "'OTHER JOINT END DIAMETERS AVAILABLE--ASK OUR REPRESENTATIVE FOR INFORMATION

13

I

Arm and Adjustable Spindle Assemblies For Drilling Only--Straight Bearing

Part Numbers

SPINDLE NOSE DIAMETER STANDARD,TAPER JOINT END DIAMETER ITEM DESCRIPTION

Complete 10" Arm 1 Spindle & Arm 14" Arm

Assemblv 1B" Arm

2 Complete Spin. Assem.

3 Bearing & Stud Assem. 4 Stud 5 Bearing/Bushing 6 Bearing/Bushing 7 Spindle 8 Thrust Bearing 9 Washer 10 Locknut (2 ReQ'd)

11 Woodruff Key 12 Detent Spring 13 Arm Only--10" 14 Arm Only--14"

15 Arm OnIY--1 B" 16 Washer 17 Hex Nut (2 ReQ'd) 18 Wedge 19 Clamp 20 Vert. Adj. Screw Assem. 21 Strap & Block 22 Screw 23 Nut

7

l~ ~19 I

13,14,15

Ue.'-

.500 .625 • 375ASA #1 M.T.

.250 .312 PART NUMBER PART NUMBER

LX-46334-21 LX-46334-1 LX-46334-22 lX-46334-2 LX-46334-23 LX-46334-3 LX-4B434-1 LX-4B420-1 LX-48435 LX-48421

X-48325 X-48325

-~~------------------- -------------------------------------------- ----.......... __ .. ---------

X-44020 08-307 X-74125-2 X-14692

---------------------- 08-309 08-208 08-308

____ w _________________

SM-1090 ---------------------- X-68306-2

X-28028 X-28028 X-2B029 X-28029 X-2B030 X-28030 08-416 OB-416

SM-5108 SM-510B X-4B453 X-4B453 X-4B459 X-4B459 LX-54B37 LX-54837 WX-53915 WX-53915

X-32B59 X-32B59 SM-5170 SM-5170

14

.875 1.125 #2 M.T. #2M.T .


LX-46334-4 LX-46334-7 lX-46334-5 LX-46334-B LX-46334-6 LX-46334-9 LX-48430-1 LX-48430-2 LX-4B422 LX-4B423 X-48325 X-4B325

X-373B5-492 X-37400-492 X-373B5-493 X-37400-493

X-7764 X-1376 X-1361 X-1374 08-409 OB-509 OB-408 OB-508

SM-1098 SM-1100 X-65266-1 X-65266-2 X-28033 X-2B033 X-28034 X-2B034 X-2B035 X-2B035 08-416 OB-416

SM-5108 SM-510B X-48453 X-48453 X-4B460 X-4B460 LX-2878B LX-2B7B8 WX-53909 WX-53909

08-5023 OB-5023 08-4024 OB-4024

Arm and Adjustable Spindle Assemblies For Drilling Only--Straight Bearing

Part Numbers

SPINDLE NOSE DIAMETER STANDARD TAPER JOINT END DIAMETER ITEM DESCRIPTION


Assembly 18" Arm 2 Complete Spin. Assem. 3 Bearing & Stud Assem. 4 Stud

5 Bearing/Bushina 6 BearinQ/BushinQ 7 Spindle 8 Thrust Bearing 9 Washer 10 Locknut (2 Req'd)

11 Woodruff Key 12 Detent Sorinq 13 Arm Only--10" 14 Arm Only--14" 15 Arm Onlv--18" 16 Washer 17 Hex Nut (2 Req'd) 18 Wedge 19 Clamp 20 Vert. Adj. Screw Assem. 21 Stra~ & Block 22 Screw 23 Nut

7 . , , . , . Ue.'-

. 1.375 1.625 . #:3 M.T. #3 M.T.


LX-44634-10 LX-46334-13 LX -46334-11 LX-46334-14 LX-46334-12 LX-46334-15 lX-48405-1 LX-48405-3 LX-48419 .LX-48424 X-48322 X-48322

X-37425-492 X-37448-492 X-37425-493 X-37448-493

X-1394 X-1416 X-1391 X-1413

OB-609 OB-709 OB-608 OB-708

SM-1112 SM-1112 X-65266-3 X-65266-4 X-28037 X-28037 X-28038 X-28038 X-28039 X-28039 X-28744 X-28744 SM-5114 SM-5114 X-48456 X-48456 X-48454 X-48454 LX-28802 LX-28802 WX-53918 WX-53918

OB-5023 OB-5023 OB-4024 OB-4024

15

2.125 . #4 M:T. 1.125

PART NUMBER LX-46334-16 LX-46334-17 LX-46334-18 LX-48407-2 LX-48415 X-28746

X-37478-972 X-37478-973

X-1428 X-1425

OB-892 OB-891

SM-1122 X-65266-5 X-28040 X-28041 X-28042 OB-816

SM-5126 X-48455 X-48457 LX-28824 WX-53921

OB-5023 OB-4024

2.625 .

#4 M.T. 1.375

PART NUMBER -...... __ .. --------------

LX-46334-19 LX-46334-20 LX-48407-9 LX-48404 X-28746

X-37509-1052 X-37509-1053

X-5356 X-5146

OB-909 OB-908

SM-1136 X-65266-6

----_ .... _-------------X-28043 X-28044 OB-816

SM-5126 X-48455 X-48457 LX-4485

WX-53924

X-4496 X-4495

Arm and Adjustable Spindle Assemblies For Drilling Only--Right Offset Bearing

Part Numbers

6

3 5 8--·,.....

7

SPINDLE N0SE DIAMETER STANDARD'TAPER JOINT END DIAMETER ITEM DESCRIPTION


Assembly 18" Arm 2 Complete Spin. Assem. 3 Bearing & Stud Assem. 4 Stud

5 Bearina/Bushina 6 BearinQ/BushinQ 7 Spindle 8 Thrust BearinQ

9 Washer 10 Locknut (2 Rea'd) 11 Woodruff Key 12 Detent Sprina 13 Arm Only--10" 14 Arm Only--14" 15 Arm Only--18" 16 Washer 17 Hex Nut (2 Req'd) 18 Wedge 19 Clamp 20 Vert. Adiust. Screw Asse 21 Strap & Block 22 Screw 23 Nut

1~ ~19 j

13,14,15

.500 c

.625 • 375A:S.A. #1 M.T .

.250 . 312 PART NUMBER PART NUMBER LX-46334-2101 LX-46334-101 LX-46334-2201 LX-46334-201 LX-46334-2301 LX-46334-301

LX-48434-3 LX-48447-1 LX-48436 LX-48433 X-48325 X-48325

-------------------.--- ----------.------------

----------------------- -----------------------X-44020 OB-307

X-74125-2 X-14692

----------------------- OB-309 OB-208 OB-308

----------------------- SM-1090 ----------------------- X-68306-2

X-28028 X-28028 X-28029 X-28029 X-28030 X-28030 OB-416 OB-416

SM-5108 SM-5i08 X-48453 X-48453 X-48459 X-48459 LX-54837 LX-54837 WX-53915 WX-53915 X-32859 X-32859 SM-5170 SM-5170

16

6)

.875 1.125 #2 M.T • #2 M.T.

437 .562 PART NUMBER PART NUMBER

LX-46334-401 LX-46334-701 LX-46334-501 LX-46334-801 LX-46334-601 LX-46334-901

LX-48448-1 LX-48448-2 LX-48442 LX-48445 X-48325 X-48325

X-37385-492 X-37400-492 X-37385-493 X-37400-493

X-7764 X-1376 X-1361 X-1374

OB-409 OB-509 OB-408 OB-508

SM-1098 SM-1100 X-65266-1 X-65266-2 X-28033 X-28033 X-28034 X-28034 X-28035 X-28035 OB-416 OB-416

SM-5108 SM-5108 X-48453 X-48453 X-48460 X-48460 LX-28788 LX-28788 WX-53909 WX-53909 OB-5023 OB-5023 OB-4024 OB-4024

Arm and Adjustable Spindle Assemblies For Drilling Only--Right Offset Bearing

Part Numbers

9

6

7 D , ,

SPINDLE N0SE DIAMETER STANDARoitTAPER JOINT END~DIAMETER ITEM DESCRIPTION

13, 14, 15

·1.375 ' 1.625' 2.125 '#3 M.T. #3 M.T •• #4 M.T. , .743 ' .875 1.125

PART NUMBER I PART NUMBER PART NUMBER ,

Complete 10" Arm --_._------------------ --------------------.-- --------------------.--1 Spindle & Arm 14" Arm LX-46334-1101 LX-46334-1401 LX-46334-1701

Assemblv 18" Arm LX-46334-1201 LX-46334-1501 LX-46334-1801 2 Complete Spin. Assem. LX-48416-1 LX-48416-3 LX-48407-6 3 Bearing & Stud Assem. LX-48444 LX-48440 LX-48417 4 Stud X-48322 X-48322 X-28746

5 Bearina/Bushina X-37425-492 X-37448-492 X-37478-972 6 Bearina/Bushina X-37425-493 X-37448-493 X-37478-973 7 Spindle X-1394 X-1416 X-1428 8 Thrust Bearing X-1391 X-1413 X-1425

9 Washer OB-609 OB-709 OB-892 10 Locknut (2 Reo'd) OB-608 OB-708 OB-891 11 Woodruff Key SM-1112 SM-1112 SM-1122 12 Detent Sorina X-65266-3 X-65266-4 X-65266-5 13 Arm Onlv--10" -----.--.--._---------- -----.--.--._---------- -----.--.--._----------14 Arm Onlv--14" X-28038 X-28038 X-28041 15 Arm Onlv--18" X-28039 I X-28039 X-28042 16 Washer X-28744 X-28744 08-816 17 Hex Nut (2 Req'd) SM-5114 SM-5114 SM-5126 18 Wedge X-48456 X-48456 X-48455 19 Clamp X-48454 I X-48454 X-48457 20 Vert. Adjust. Screw Asse LX-28802 I LX-28802 LX-28824 , , 21 Strap & Block WX-53918 1 WX-53918 I WX-53921 ,

I 22 Screw 08-5023 L 08-5023 08-5023 23 Nut 08-4024 I 08-4024 08-4024 I

17

2.625 #4 M.T.

1.375 PART NUMBER

--------------------.--LX-46334-1901 LX-46334-2001

LX-48407-16 LX-48410 X-28746

X-37509-1052 X-37509-1053

X-5356 X-5146

OB-909 OB-908

SM-1136 X-65266-6

-----.--.--._----------X-28043 X-28044 08-816

SM-5126 X-48455 x-48457

, LX-4485 I WX-53924

X-4496 I X-4495 I

Arm and Adjustable Spindle Assemblies For Drilling Only--Left Offset Bearing

Part Numbers

I 12l 12 --'-:::::in 11- . 10 : .. ,. .". t

" I 'f " "I , ' , I

I~ ~19 I

96 : ]:" ::.::

3 ;~' 1 Y·.:J': '~--.:------' 5 11l :~ .. 8 : :

[} '. 7 ••

17 13,14,15

'20 U 5---:J

SPINDLE NOSE DIAMETER .500 .625 STANDARD TAPER .375ASA #1 M.T. JOINT END DIAMETER .250 .312 ITEM DESCRIPTION PART NUM8ER PART NUM8ER

Complete 10" Arm LX-46334-2102 LX-46334-102 1 Spindle & Arm 14" Arm LX-46334-2202 LX-46334-202

Assembly 18" Arm LX-45334-2302 LX-46334-302 2 Com~lete S~in. Assem. LX-48434-5 LX-48441-1 3 Bearing & Stud Assem. LX-48436 LX-48433 4 Stud X-48325 X-48325

5 Bearing/Bushing _ .. _-_.-._------------- -------------.. ---------6 Bearing/Bushing ----------------------- ---_ .... _--_ .. _---_ .... _----7 Spindle X-44020 OB-307 8 Thrust Bearing X-74125-2 X-14692

9 Washer ----------------------- OB-309 10 Locknut (2 Reg'd) OB-208 OB-308 11 Woodruff Key ----------------------- SM-1090 12 Detent Sorino ------------_ .. _-------- X-68306-2 13 Arm Onlv--10" X-28028 X-28028 14 Arm Only·-14" X·28029 X·28029 15 Arm Only··18" X·28030 X-28030 16 Washer OB-416 OB-416 17 Hex Nut (2 Reg'd) SM-5108 SM·5108 18 Wedge X-48453 X-48453 19 Clamp X-48459 X-48459 20 Vert. Adj. Screw Assem. LX-54837 LX·54837 21 Strap & Block WX·53915 WX-53915 22 Screw X·32859 X-32859 23 Nut SM-5170 SM·5170

18

.875 1.125 #2 M.T. #2M.T.

.437 .562 PART NUM8ER PART NUM8ER

LX-46334-402 LX-46334-702 LX-46334-502 LX-46334-802 LX-46334-602 LX-46334-902

LX-48449-1 LX-48449-2 LX-48442 LX-48445 X-48325 X-48325

X-37385-492 X-37400-492 X-37385-493 X-37400-493

X-7764 X-1376 X-1361 X-1374 OB-409 OB-509 OB-408 OB-508

SM-1098 SM-1100 X-65266-1 X-65266-2 X-28033 X-28033 X-28034 X·28034 X·28035 X·28035 OB-416 OB-416

SM-5108 SM-5108 X-48453 X-48453 X-48460 X-48460 LX·28788 LX·28788 WX·53909 WX-53909 OB-5023 OB-5023 OB·4024 OB-4024

Arm and Adjustable Spindle Assemblies For Drilling Only--Left Offset Bearing

Part Numbers

7 , , , , , ,

13,14, IS

UB'-

SPINDLE NOSE DIAMETER 1.375 1.625 STANDARD'TAPER #3 M.T. #3 M.T. JOINT END'DIAMETER .743 .875 ITEM DESCRIPTION PART NUMBER PART NUMBER

Complete 10" Arm ------------------_ .. - ------------------_ .. -1 Spindle & Arm 14" Arm LX-46334-1102 LX-46334-1402

Assembly 18" Arm LX-46334-1202 LX-46334-1502 2 Complete Spin. Assem. LX-48450-1 LX-48450-3

3 Bearing & Stud Assem. LX-48444 . 'LX-48440 4 Stud X-48322 X-48322

5 Bearing/Bushing X-37425-492 X-37448-492 6 Bearina/Bushing X-37425-493 X-37448-493 7 Spindle X-1394 X-1416

8 Thrust Bearing X-1391 X-1413

9 Washer OB-609 OB-709 10 Locknut (2 Reo'd) OB-608 OB-708 11 Woodruff Key SM-1112 SM-1112 12 Detent Sorina X-65266-3 X-65266-4

13 Arm Onlv--10" ................. _------------.... ................. _------------.... 14 Arm Only--14" X-28038 X-28038

15 Arm Only--18" X-28039 X-28039

16 Washer X-28744 X-28744 17 Hex Nut (2 Req'd) SM-5114 SM-5114 18 Wedge X-48456 X-48456

19 Clamp X-48454 X-48454

20 Vert. Adi. Screw Assem. LX-28802 LX-28802 21 Strap & Block WX-53918 WX-53918 22 Screw OB-5023 OB-5023 23 Nut 08-4024 08-4024

19

~? I ()

2.125 #4 M.T. 1.125

PART NUMBER ------------------_ .. -LX-46334-1702 LX-46334-1802

LX-48407-8 LX-48417 X-28746

X-37478-972 X-37478-973

X-1428 X-1425

OB-892 OB-891

SM-1122 X-65266-5

.. ............... _------------.... X-28041 X-28042 OB-816

SM-5126 X-48455 X-48457 LX-28824 WX-53921 OB-5023 OB-4024

0)

2.625 #4 M.T.

1.375 PART NUMBER ------------------_ .. -LX-46334-1902 LX-46334-2002

LX-48407-17 LX-48410 X-28746

X-37509-1052 X-37509-1053

X-5356 X-5146

OB-909 OB-908

SM-1136 X-65266-6

.. ............... _------------.... X-28043 X-28044 OB-816

SM-5126 X-48455 x-48457 LX-4485

WX-53924 X-4496 X-4495

E T 1 A -

$1= , c. • hh ~ ~ , , , ~' ,.~ '., I I"'~

:-;:~

Q ' J r , ...

Arm and Adjustable Spindle Assemblies For Drilling And Tapping

Specifications

C' ~~'::-~.y I II ~ ~ I I \ I I I j I L-l I I 1,1 ~jl.. f1l

T G

L , D" , ~

H C D "

J 0 0

, ' ~ ,-, c.....J F...J

NOTE: THESE SPINDLES PROVIDE .50 FLOAT FOR TAP REVERSING

. ", ,J SPINDLE,NOSErDIAMETER' "J;, ,'" DIM DESCRIPTION;

, :375 ;500' > '/ .625 40:',750 ! ' .' A Standard Taper .239ASA .375 ASA* #1 M.T.* #1 M.T.* B Joint End Diameter .217 .312 .310 .437 C End of Spindle to Head Flange (Min) 5.25 6.06 8.81 9.75 D End of Spindle to Head Flange (Max) 6.75 7.56 10.31 11.25 E S~indle Bearing Length 5.00 5.00 5.44 6.31 F Bearing Key Width .437 .437 .437 .625 G Arm Height 3.12 3.12 3.12 3.12 H Arm Width 1.12 1.12 1.12 1.25 I "T" Slot Width .44 .44 .44 .62 J Maximum Distance 10" Arm 7.84 7.84 7.84 6.63

Between "T" Bolts 14" Arm 11.84 11.84 11.84 10.63 18" Arm 15.84 15.84 15.84 14.63

K Length of Arm 10" Arm 10.50 10.50 10.50 10.50 (End of Arm to Groove) 14" Arm 14.50 14.50 14.50 14.50

18" Arm 18.50 18.50 18.50 18.50 L Minimum Center Distance .44 .56 .72 .84 M Offset-Right and Left Bearings .84 .84 1.19 1.56

*OTHER TAPERS ARE AVAILABLE--ASK OUR SALES REPRESENTATIVE FOR INFORMATION

20

Arm and Adjustable Spindle Assemblies For Drilling And Tapping

Specifications

E T 1 A -

file I (: Y b:""L .... C!.,...~ , ,:r,: .... - --+~"V 't-1 I ~II r ~

~ I I ~ : 1 I J I I!-: L-I I I I" , ,

" n , ~'

, U I"~ , ~

Arm and Adjustable Spindle Assemblies For Drilling and Tapping

Straight Bearing -- Part Numbers

9 10

II

12--.:t:~1 6,7,8----1,-l1

13--4:

3 6

5---IQ ~ ; , ' , ' ,

4 24 25 16 IS 14

}

717

29 26 2&

F : I eJ'\ ~ '.:

IIT~ END ~~R vOll 'r:

1 ':'1'" ,y,,, & Arm

2 ljl 3 Bearing & Stud A, 4 Stud

10" Arm 14" Arm 18" Arm

5 6 Thrust (2) Req'd. 7 8 9

13 14 15 16

.Steel I mUSl v I nrUSI

uelem 01-"" '\I W ,,,,Irllff Key )rive Pin :;ollar

17 Rd. Hd. )iler Arm 10" Arm umy--14"

21 Arm un y--18" 22 23 JIClnllJ 24 Hex Nut 25 m,,,",,, 26 Vert. Ari;IIt II.

& Block

~ut

.231 SA v ••

PART NIIM I 53-29 LX-54653-30

~1

Y.

:>IVI-LIUf

)\-LLO\.O

X-76593 X-34568 X-34550 X-76592

M-6

.-7',L5( 51

X-32855 SM-5106

I

Y-"l?A'i1

WX-5 12

SM-5 0

22

.500 .375ASA

.2~

PART IUM. I ;3-26 I 53-27 I '3-28

I Y _LlA"lt;"

I Y _LlA"lt;t;

Y_"l?At;~

"l

vlvl-L'109 X-22616 X-76595 X-78156 Y_ "lAO~(\

'100\1£

X-7'1256

SM-5106

.


Straight Bearing -- Part Numbers

9 10

II 19,20,21

12=~~1 6,7,8 4

13---oj,~~~=24 .!1 25

===i#1f.'~~~-====16 3 ". 15 6 14 Q' 17 5---l. ]1-7 :~. 29 26 ;; ......----=28 . ,

SPINDLE NOSE DIAMETER .875 1.125 1.375 . STANDARD TAPER #2 M.T. #2 M.T. #2 M.T. JOIN END DIAMETER .437 .562 .743 ITEM DESCRIPTION PART NUM. PART NUM. PART NUM.

Complete 10" Arm LX-54653-11 LX-54653-14 LX-54653-17 1 Spindle & Arm 14" Arm LX-54653-12 LX-54653-15 LX-54653-18

Assembly 18" Arm LX-54653-13 LX-54653-16 LX-54653-19 2 Complete Spindle Assem. LX-67847 LX-67836-2 LX-67836-3 3 Bearing & Stud Assembly LX-67837 LX-67841 LX-67845 4 Stud X-48325 X-48325 X-48325 5 Spindle X-17484 X-45260 X-45272 6 Thrust Bearing (2) ReQ'd. 08-410 X-1374 X-1391 7 Steel Thrust Washers

M~~WM.8H8HH ___________

-----------------.---- ----oo-------.. _--------8 Bronze Thrust Washers ---------------------- -------.-._-----_.---- --------------------.. 9 Detent Spring X-65266-1 X-65266-2 X-65266-3 10 Woodruff Key SM-1098 SM-1100 SM-1112 11 Drive Pin SM-2119 SM-2125 SM-2126 12 Collar X-22628 X-45265 X-45277 13 Spacer X-67833 X-67840 X-67844 14 Plunger X-45230 X-45266 X-45266 15 Spring X-45871 X-45267 X-45278 16 Spring Retainer X-76598 X-76579 X-76579 17 Rd. Hd. Machine Screw SM-6128 SM-6128 SM-6128 18 Oiler X-32594 X-32594 X-32594 19 Arm Only--10" X-45270 X-45270 X-45270 20 Arm Only--14" X-45279 X-45279 X-45279 21 Arm Only--18" X-74257 X-74257 X-74257 22 Wedge X-48452 X-48452 X-48452 23 Clamp X-45239 X-45239 X-45239 24 Hex Nut SM-5108 SM-5108 SM-5108 25 Washer X-45240 X-45240 X-45240 26 Vert. Adjust. Screw Assem. LX-28788 LX-28788 LX-28788 27 Strap & Block WX-53909 WX-53909 WX-53909 28 Screw 08-5023 OB-5023 OB-5023 29 Nut OB-4024 OB-4024 OB-4024

23

1.625 #3 M.T.

.875 PART NUM. LX-54653-23 LX-54653-24 LX-54653-25 LX-73819-3 LX-73821-1

X-48325 X-73830 X-1413

--------------------------------------

X-65266-4 SM-1112 SM-2127 X-73823 X-73822 X-45266 X-79692 X-76573 SM-6128 X-32594 X-45270 X-45279 X-74257 X-48452 X-45239 SM-5108 X-45240 LX-28788 WX-53909 OB-5023 08-4024


Right Offset Bearing -- Part Numbers

9 10

, ( -11 I Ij ;:~-.. ....

, ' 12~-ldI1 ' I,; , '1,;,--__ --'

6. 7, 8-"'H, ,I i ':" , I t'~In._-4

13~~~' ~-~~""i"~~24 25 16 3 IS 6 W

i~:

24

19,20,21

0)


Right Offset Bearing -- Part Numbers

9 18 10 22

23

11 19,20,21 12

6,7,8 4

13 24 25

~ 3 16 15 6 14 I n Q 17

) 5

" ]1-'. ~ 26 , ' , ' ,

1 & Arm

25

0)


Left Offset Bearing -- Part Numbers

9 18 10 22 23

11 19,20,21 12

6,7,8 4

13 24 25 16 ((\ I ()


Left Offset Bearing -- Part Numbers

9 10

11

12-~~1 6, 7. 8 _-----""-'II 4

13-~~~~~~24 25 ==~===16 3 IS 6 14

5 i:: SPINDLE NOSE DIAMETER .875 STANDARD TAPER #2 M.T. JOINT END DIAMETER .437 ITEM DESCRIPTION PART NUM.

Complete 10" Arm LX-54653-1102 1 Spindle & Arm 14" Arm LX-54653-1202

Assembly 18" Arm LX-54653-1302 2 Complete Spindle Assem. LX-73184-2 3 Bearing & Stud Assembly LX-73185-1 4 Stud X-48325

19,20,21

1.125 #2 M.T.

.562. PART NUM.

LX-54653-1402 LX-54653-1502 LX-54653-1602

LX-67826-6 LX-67827-4

X-48325 5 Spindle X-77484 .. X-45260 6 Thrust Bearinq (2) Reo'd. OB-410 X-1374 7 Steel Thrust Washers ---.. ------------------ ----------------------8 Bronze Thrust Washer ---------------------- ----------------------9 Detent Spring X-65266-1 X-65266-2 10 Woodruff Key SM-1098 SM-1100 11 Drive Pin SM-2119 SM-2126 12 Collar X-22628 X-45265 13 Spacer X-67833 X-67840 14 Plunger X-45230 X-45266 15 Sprinq X-45231 X-45267 16 Sprinq Retainer X-76598 X-76579 17 Rd. Hd. Machine Screw SM-6128 SM-6128 18 Oiler X-32594 X-32594 19 Arm Only--10" X-45270 X-45270 20 Arm Only--14" X-45279 X-45279 21 Arm Onlv--18" X-74257 X-74257 22 Wedge X-48452 X-48452 23 Clamp X-45239 X-45239 24 Hex Nut SM-5108 SM-5108 25 Washer X-45240 X-45240 26 Vert. Adust. Screw Assem. LX-28788 LX-28788 27 Strap & Block WX-53909 WX-53909 28 Screw OB-5023 OB-5023 29 Nut 08-4024 OB-4024

27

()

1.375 #2. M.T •.

.743 PART NUM.

LX-54653-1702 LX-54653-1802 LX-54653-1902

LX-67826-10 LX-67827-6

X-48325 X-45272 X-1391

--------------------------------------------

X-65266-3 SM-1112 SM-2126 X-45277 X-67844 X-45266 X-45278 X-76579 SM-6128 X-32594 X-45270 X-45279 X-74257 X-48452 X-45239 SM-5108 X-45240 LX-28788 WX-53909 OB-5023 08-4024

0)

1.625 #3 M.T.

.875 PART NUM.

LX-54653-2302 LX-54653-2402 LX-54653-2502

LX-73820-6 LX-73821-3

X-48325 X-73830 X-1413

-----........ _------------------------------

X-65266-4 SM-1112 SM-2127 X-73823 X-73822 X-45266 X-79692 X-76573 SM-6128 X-32594 X-45270 X-45279 X-74257 X-48452 X-45239 SM-5108 X-45240 LX-28788 WX-53909 OB-5023 OB-4024

~~ Cartridge Type Spindle Assemblies For Drilling -- 5 5/8" Slip Plate

Adjustable Tool Holder Required Part Numbers and Specifications

c

SPECIFICATIONS DIM DESCRIPTION .625

A Spindle Nose Length' 2.88 B Spindle Nose Bore Dia. .375 C Joint End Diameter .312 D Spin. Length From Head' 8.50 E Mininum Center Distance .68

10

JOint Hnd i)lItmclcr

9 7,8

5

12 -::;ft.~~. [-1 4 (..... Nose DIameter

~[J~ I: II :

'-----~II;-:JL-- Nose Bore .. -I 1--- Dldfl'lctcr

SPINDLE NOSE DIAMETER .750 .875 1.125 4.12 4.38 4.62 .500 .625 .625 .437 .437 .562 9.75 9.94 10.25 .81 .94 1.18

'LONGER NOSE LENGTHS AVAILABLE--ASK OUR SALES REPRESENTATIVE FOR INFORMATION

PART NUMBERS SPINDLE NOSE DIAMETER .625 .750 .875 1.125 SPINDLE NOSE BORE DIA. .375 .500 .625 .625 JOINT END DIAMETER .312 .437 .437 .562 ITEM DESCRIPTION PART NUMBER PART NUMBER PART NUMBER PART NUMBER

1 Complete Spindle Assem. LX-70989-250 LX-73262-375 LX-74785-400 LX-74784-425 2 Sleeve Only X-68337 X-73261 X-65261 X-65271 3 Spindle Only LX-82960-250 X-73263-375 X-65219-400 X-65229-425 4 Thrust Bearing X-14692 OB-410 X-1361 X-1374 5 Bushing/Needle Bearing X-68294-5 X-74418-4 X-74775-20 X-74775-34 6 Bushing/Needle Bearing X-68295-5 X-65252-19 X-74775-20 X-74775-34 7 Rear Thrust Bearil:!g X-74125-3 X-65273-4 X-65273-2 X-65356-1 8 Washer

N __ M_W __ ~ ______ M ____ M __ W

X-65272-4 X-65272-2 ------------------------9 Lock Nuts (2 Req'd) X-44703 X-73260 OB-408 OB-508 10 Woodruff Key ------------------------ SM-1098 SM-1098 SM-1100 11 Detent Spring X-68306-2 X-65266-1 X-65266-1 X-65266-2 12 Grease Fitting" X-65358 X-65358 X-65358 X-65358 13 Set Screw SM-6604 SM-6633 SM-6633 SM-6662

"REQUIRES X-65359 NOZZLE TO ADAPT STANDARD GREASE GUN

28

Cartridge Type Drill Spindle Assemblies For Drilling -- 5 5/8" Slip Plate

Adjustable Tool Holder Required Part Numbers and Specifications

c JOint End Diameter

9 7,8

~"-Itf..~

D I ~--"

lln '~' " , " , " , JI : n-l I--

SPECIFICATIONS DIM DESCRIP,TION A S[1indle Nose Length" B Spindle Nose Bore Dia. C Joint End Diameter 0 Spin. Length From Head" E Mininum Center Distance

rnrn I-E-I

,

1.375 5.38 .875

.743"" 11.00 1.44

12 4

SPINDLE NOSE DIAMETER 1.625' ; - 2.125 5.62 7.12 1.062 1.375 .875"" 1.125"" 11.25 12.15 1.68 2.18

,

2.625 8.62 1.875

1:375"" 14.25 2.68

"LONGER NOSE LENGTHS AVAILABLE--ASK OUR SALES REPRESENTATIVE FOR INFORMATION ""OTHER JOINT END DIAMETERS AVAILABLE--ASK OUR SALES REPERSENTATIVE

PART NUMBERS SPINDLE NOSE DIAMETER 1.375 1.625 ; 2.125 2.625 SPINDLE NOSE BORE DIA. .875 1.062 , , , 1.375 ., ,,'- ',' 1.875 , , . JOINT END.OIAMETER* .743 \ .875· ' , -- ~1.125 , ',1.375

,

,

ITEM DESCRIPTION PART NUMBER PART NUMBER PART NUMBER PART NUMBER 1 Complete Spindle Assem. LX-74783-500 LX-74781-525 LX-74779-675 LX-74937-825 2 Sleeve Only X-74770 X-65291 X-65301 X-74936 3 Spindle Only X-65239-500 X-65249-525 X-65259-675 X-68429-825 4 Thrust BearinQ X-1391 X-1413 X-1425 X-5146 5 Bushing/Needle Bearing X-74775-47 X-74775-57 X-74775-68 X-74775-83 6 Bushing/Needle Bearing X-74775-47 X-74775-57 X-74775-68 X-74775-83 7 Rear Thrust BearinQ X-73551 X-65356-3 X-65356-4 -----_ .. _-----_ .. --------8 Washer X-65272-1 ------------------------ --------_ .. --------_ .. ---- OB-909 9 Lock Nuts (2 Req'd) OB-608 OB-708 OB-891 OB-908 10 WoodruffK~ SM-1112 SM-1112 SM-1122 SM-1136 11 Detent SrHing X-65266-3 X-65266-4 X-65266-5 X-65266-6 12 Grease Fitting""" X-65358 X-65358 X-65358 X-65358 13 Set Screw SM-6662 SM-6662 SM-6668 SM-6668

""REQUIRES X-65359 NOZZLE TO ADAPT STANDARD GREASE GUN

29

Cartridge Type Spindle Assemblies For Drilling and Tapping--5 5/8" Slip Plate

Adjustable Tool Holder Required Specifications

NOTE' THESE SPINDLES PROVIDE 50 FLOAT FOR TAP REVERSING . ", ~ SPINDLE.NOSE DIAMETER . ;J' '

DIM ~.J/, ' DESCRIPTION :437 .! ! .500 \;" .. 6251 l , .750 ' A Spindle Nose Length" 2.25 2.25 2.62 3.62 B Spindle Nose Bore Diameter .250 .312 .375 .500 C Joint End Diameter .217 .315 .312 .437 D Spindle Length From Head" ---------------.. -- ...... _---------........... .. ...... _- .. --.................. ------------------

In Drill Position 9.12 9.12 9.87 10.87 In TapPosition 8.88 8.88 9.37 10.37

E Minimum Center Distance .50 .56 .68 .82 "LONGER NOSE LENGTHS AVAILABLE--ASK OUR SALES REPRESENTATIVE FOR INFORMATION

30

Cartridge Type Spindle Assemblies For Drilling and Tapping--5 5/8" Slip Plate


NOTE' THESE SPINDLES PROVIDE 50 FLOAT FOR TAP REVERSING . . SPINDLE NOSE DIAMETER

DIM DESCRIPTION .875 1.125 1.375 . A Spindle Nose LenQth* 4.12 4.12 4.37 B Spindle Nose Bore Diameter .625 .625 .875 C Joint End Diameter .437 .562 .743 0 Spindle LenQth From Head" -...... __ .... _--_ ........ .. .... _-_ ........ ---...... --------.. _--------

In Drill Position 11.37 11.62 11.87 tn Tap Position 10.87 11.12 11.37

E Minimum Center Distance .94 1.18 1.44

1.625 4.50 1.062 .875""

..... _-_ ... _---_ .. -----12.12 11.62 1.68

"LONGER NOSE LENGTHS AVAILABLE··ASK OUR SALES REPRESENTATIVE FOR INFORMATION • OTHER JOINT END DIAMETERS AVAILABLE··ASK OUR SALES REPRESENTATIVE

31

Cartridge Type Spindle Assemblies Drilling and Tapping--5 5/8" Slip Plate

Adjustable Tool Holder Required Part Numbers

14 End

2

10

4

2 3

1

15 ·6

No,. Diameter

No';c Bore Diameter

SPINDLE NOSE DIAMETER .437 .500 .625 .750 SPINDLE NOSE BORE DIA. .250 .312 .375 .500 JOINT END DIAMETER .217 .312 .375 .437 DETAIL DESCRIPTION PART NO. PART NO. PART NO. PART NO.

1 Complete Spindle Assem. LX-74201-350 LX-74198-350 LX-74195-425 LX-68276-525 2 Sleeve Only X-64836 X-68336 X-68337 X-73261 3 Lower Bushing WN_WNN_w ______________ --_ .. -----'"------------ X-68294-5 X-68294-6 4 Upper Bushing ---------------------- ---------.... _---------- X-68295-5 X-68295-6 5 Spindle Only LX-74202-350 LX-74199-350 LX-74196-425 X-68297 -525 6 Positioning Spacer X-64828 X-68324 X-68308 X-68280 7 Thrust Bearing X-74125-1 X-74125-2 x-14692 OB-410 8 Retainer X-64826 X-68327 X-68304 X-68277 9 Rear Thrust Bearing X-74125-1 X-74125-2 X-74125-3 -----------------------10 Sprin_g X-64827 X-68323 X-68303 X-68296 11 Collar X-64825 X-68326 X-68305 X-68278 ---12 Drive Pin SM-2111 SM-2112 SM-2113 SM-2114 13 Woodruff Key ---------------------- ---------------------- SM-1092 SM-1098 14 Detent Spring X-68306-1 X-68306-2 X-68306-3 X-65266-1 15 Grease FittinR* X-65358 X-65358 X-65358 -------------.. --------16 Set Screw SM-6604 SM-6604 SM-6604 SM-6604

'REQUIRES X-65359 NOZZLE TO ADAPT STANDARD GREASE GUN

32

Cartridge Type Spindle Assemblies Drilling and Tapping--5 5/8" Slip Plate


End

11 10

8,9

4

2

1

15 6

5 N()~e

Diameter 16

Nose Uore Diameter

SPINDLE NOSE DIAMETER .875 1.125 1.375 SPINDLE NOSE BORE DIA. .625 .625 .875 JOINT END DIAMETER .437 .562 .743 DETAIL DeSCRIPTION PART NO. PART NO. PART NO.

1 Complete Spindle Assem. LX-74190-600 LX-73934-600 LX-73935-625 2 Sleeve Only X-65261 X-65271 X-65281 3 Lower Bushing X-68284-4 X-68284-7 X-68284-8 4 Upper Bushing X-68287-4 X-68287-5 X-68287-6 5 Spindle Only X-74191-600 X-73933-600 X-73936-625 6 Positioning Spacer X-68248 X-68265 X-68272 7 Thrust Bearing X-1361 X-1374 X-1391 8 Retainer X-68249 X-73931 X-73929 9 Rear Thrust Bearing X-74125-4 X-65356-1 X-65356-2 10 Spring X-68252 X-68289 X-68285 11 Collar X-68250 X-73932 X-73930 12 Drive Pin SM-2114 SM-2120 SM-2121 13 Woodruff Key SM-1098 SM-1100 SM-1108 14 Detent Spring X-65266-1 X-65266-2 X-65266-3 15 Grease Fitting' X-65358 X-65358 X-65358 16 Set Screw SM-6633 SM-6662 SM-6662

'REQUIRES X-65359 NOZZLE TO ADAPT STANDARD GREASE GUN

33

1.625 1.062 .875

PART NO. LX-73818-650

X-65291 X-68284-9 X-68287-7

X-73817-650

X-73813 X-1413 X-73816

X-65356-3 X-73814 X-73815 SN-2122 SM-1112

X-65266-4 X-65358 SM-6662

DIM A B C D E

Cartridge Type Spindle Assemblies For Drilling -- 4 1/4" Slip Plate


D I A

, ,

'r': ":':J ,1," SB1NDLE 'NOSE;DIAME"ERJJ~~ "::,, J~ J DESCRIPTION, J J , J 'J , . 500 " " \"~ .625"'j \:').750' . !~ ::;:875

Spindle Nose Lenqth' 2.75 3.00 4.00 4.50 Spindle Nose Bore Diameter .312 .375 .500 .625 Joint End Diameter 250 .312 .437 .437 Spindle LenQth From Head' 7.00 7.25 8.25 8.75 Minimum Center Distance .56 .68 .82 .94

, LONGER NOSE LENGTHS AVAILABLE--ASK OUR SALES REPRESENTATIVE FOR INFORMATION

34

Cartridge Type Spindle Assemblies For Drilling -- 4 1/4" Slip Plate


1

10---11

11 Joint End Diameter

9 7,8

'10--6 .,.....--2

S+-+t

12 4 ;~t---Nose Diameler

~~--r I, l " > 11 :

SPINDLE NOSE DIAMETER .500 .625 .750 SPINDLE NOSE BORE DIA. .312 .375 .500 JOINT ENE>JDIAMETER .250 .312 .437 -ITEM fDESCRIPTION PART NUMBER PART NUMBER PART NUMBER

1 Complete Spin. Assem. LX-74230-275 LX-74226-300 LX-74220-400 2 Sleeve Only X-68335 X-68338 X-68282 3 Spindle Only LX-74231-275 LX-7 4227 -300 X-74221-400 4 Lower Thrust Bearing X-74125-2 X-14692 OB-410 5 Bushing/Needle Bearing ------------------------ X-68294-5 X-68294-6 6 Bushing/Needle Bearing ---.-------------------- X-68295-5 X-68295-6 -7 Upper Thrust Bearing X-74125-2 X-74125-3 X-65272-4 8 Washer ---------------------.-- X-65273-4

Lock Nuts (2 Req'dJ -

9 X-74229 X-44703 X-21024 -10 Woodruff Key -----.------------------ ------------------------ ---------------------_¥-11 Detent Spring 68306-1 X-68306-2 X-65266-1 12 Grease Fitting X-65358 13 Set Screw ------------------------ ---------._-------------

________ w ________ • __ ._._

35

.875

.625

.437 PART NUMBER

LX-74805-450 X-68299

X-74567-450 X-1361

X-74775-20 X-74775-20 X-65273-2 X-65272-2

OB-408 SM-1098

X-65266-1 X-65358 SM-6633

Cartridge Type Spindle Assemblies Drilling and Tapping -- 4 1/4" Slip Plate


NOTE' THESE SPINDLES PROVIDE 50 FLOAT FOR TAP REVERSING SPINDtE NOSE DIAMETER ~ " , ,

DIM ,

DESCRIPTION .500 .625 .750 .875 , , " A Spindle Nose Length' 3.50 4.25 5.25 6.00 B Spindle Nose Bore Diameter .312 .375 .500 .625 C Joint End Diameter .312 .375 .437 .437 D Spindle Length From Head' --------------- .... - -------------------- -------------------- ...... ------.. _ .. --...... -

In Drill Position 7.75 8.50 9.50 10.25 In Tap Position 7.25 8.00 9.00 9.75

E Minimum Center Distance .56 .68 .82 94 'LONGER NOSE LENGTHS AVAILABLE--ASK OUR SALES REPRESENTATIVE FOR INFORMATION

36

Cartridge Type Spindle Assemblies Drilling and Tapping -- 4 1/4" Slip Plate


SPINDLE NOSE DIAMETER SPINDLE NGSE BORE DIA. JOINT END DIAMETER ITEM DESCRIPTION

1 Complete Spin. Assem. 2 Sleeve Only 3 Lower Bushing 4 Upper Bushing 5 Spindle Only 6 Positioning Spacer 7 Lower Thrust Bearing 8 Retainer 9 Upper Thrust Bearing 10 Spring 11 Collar 12 Drive Pin 13 Woodruff Key 14 Detent Spring 15 Grease Fitting 16 SetScrew

Joint End -----Diameter

1

6--

--10

4 'i\---2

3

15

'------'f-+' Nose Hore Diameter

.500 .625

.312 .375

.312 ,

'.375 ' '

PART NUMBER PART NUMBER LX-74212-350 LX-74209-425

X-68335 X-68338 --.. ~-..... -........ --.......... -.. -.. X-68294-5 _ .. __ ........................................ X-68295-5

LX-74213-350 LX-7 4210-425 X-68324 X-68308

X-74125-2 X-14692 X-68327 X-68304

X-74125-2 X-74125-3 X-68323 X-68303 X-68326 X-68305 SM-2112 SM-2113

-_ .. __ .... ----------------- SM-1092 X-68306-2 X-68306-3 X-65358 X-65358 SM-6604 SM-6604

37

.750

.500

.437 ' / "

PART NUMBER LX-68283-525

X-68282 X-68294-6 X-68295-6

X-68293-525 X-68280 OB-410 X-68277

-_ ........ _-------------_ .... X-68296 X-68278 SM-2114 SM-1098

X-65266-1 -----------------------

SM-6604

.875 ~c .625

I' ' '.437 PART NUMBER

LX-74204-600 X-68299

X-68287-4 X-68284-4

X-74205-600 X-68248 X-1361 X-68249

X-74125-4 X-68252 X-68250 SM-2114 SM-1098

X-65266-1 X-65358 SM-6633

SPINDLE < SIZE '. .625 .688 .688 .750 .750 .875 .875

1.125 1.375 1.375 1.375 1.625 1.625 2.125 2.625 3.00

Adjustable Adaptors Specifications and Part Numbers

.06 ~

- -j: -I i; I! I I, I .. l...J_U -

rro.--r.,. _ ,I ii !

---j,-I-,--:--., I " I, , ., ___ l!-J_ 11_ ~

Ll'.' L'U L LA~ E

C

T B

1--

;. SHANK . . A.S.A. .

ADAPTOR . .. ADAPTOR DIMEMSIONS 0 SIZE TAPER NUMBER •• A B C D .375 .239 X-71182 .56 .375 2.12 1.00 .437 .239 X-71184 .62 .437 2.38 1.19 .437 .299 X-71185 .62 .437 2.38 1.19 .500 .375 X-71187 .88 .500 3.00 1.44 .500 0 X-71189 .88 .500 3.00 1.44 .625 .375 X-63752 .50 .625 3.00 1.50 .625 1 952612 .94 .625 3.00 1.50

-.625 1 952612 .88 .625 3.00 1.50 750 1 952613 .88 .750 3.00 1.50 .875 1 X-40113-11 1.00 .875 3.62 1.62 875 2 952614 1.00 .875 3.62 1.62

1.062 1 952617 1.00 1.062 3.62 1.62 ----- -----------1.062 2 952618 1.00 1.062 3.62 1.62 --- -----1.375 I 2 952619 1.26 1.375 4.62 1.88 1.875 3 X-40113-6 170 1.875 5.62 2.50 1.875 4 952621 1.70 1.875 5.62 2.50

38

E 1.06 1.12 1.12 1.50 1.50 1.38 1.38 1.38 1.38 1.88 1.88 1.88 1.88 2.62 3.00 3.00

Spindle Size .625 .688 .688 .750 .750 .875 .875 1.125 1.375 1.375 1.375 1.625 1.625 2.125 2.625 3.00

Adjustable Adaptor Assemblies Part Numbers

Nut Key

/ -_/

Adaptor

Shank A.S.A. Assembly Adaptor Nut Nuts Size Taper Number Number, Number Req'd. .375 .239 LX-71180-1 X-71182 X-71181-3 2 .437 .239 LX-71180-2 X-71184 X-71183 2 .437 .299 LX-71180-3 X-71185 X-71183 2 .500 .375 LX-71180-4 X-71187 X-71186 2 .500 0 LX-71180-5 X-71189 X-71186 2 .625 .375 LX-63984-2 X-63752 X-54959 2 .625 1 LX-63984-3 952612 X-54959 2 .625 1 952601 952612 952623 1 -- --- -750 1 1-_ 952602 952613 952624 1 -

.875 1 LX-63984-4 X-40 113-1.1- 952625 1 ------

.875 2 952603 952614 952625 1 1.062 1 952606 952617 952627 1 1.062 2 952607 952618 952627 1 1.375 2 952608 952619 952628 1 1.875 3 LX-63984-5 X-40113-6 952629 1 1.875 4 952610 952621 952629 1

39

WOODRUFF Key

___ 8 ______________

---------------------------_ .. ------

SM-1098 SM-1098 SM-1102 SM-1102 SM-1102 SM-1102 SM-1108 SM-1108 SM-1110 SM-1110 SM-1118 SM-1134 SM-1010

SPIN. SHANK SIZE SIZE .438 .250 .438 .250 .500 .312 .500 .312 .500 .312 .625 .375 .625 .375 .625 .375 .688 .437 .688 .437 .750 .500 .750 .500 .750 .500 .875 625 .875 .625 .875 .625

1.125 .625 1.125 .625 1.125 .625 1.375 .750 . 1.375 . 750 1.375 .750 1.375 .875 1.625 1.062 1.625 1.062 1.625 1.062 1.625 1.062 2.125 1.375 2.125 1.375

Adjustable Extension Adaptors Specifications and Part Numbers

A.S.A. ADAPTOR NO. ADAPTOR DIMENSIONS (E) NOSE LENGTH TAPER (ITEMIZED) A B C D MIN. -MAX. INC.

.239 X-71190 .50 .249 2.00 .438 1.50 5.75 .25

.299 X-71191 .50 .249 2.00 .438 2.00 5.75 .25

.299 X-71192 .50 .312 2.00 .50 2.00 6.25 .25

.375 X-71193 .50 .312 2.00 .50 2.25 9.00 .25 #0 X-71194 .50 .312 2.00 .50 2.75 6.25 .25

.299 X-71195 .50 .374 2.24 .50 2.00 6.75 .25

.375 X-71196 .50 .374 2.24 .50 2.25 9.00 .25 #0 X-71197 .50 .374 2.24 .50 2.75 6.75 .25

.375 X-71198 .56 .437 2.50 .50 2.25 7.25 .25 #0 X-71199 .56 .437 2.50 .50 2.75 7.25 .25

.375 X-71200 1.00 .500 3.24 .50 2.25 7.75 .25 #0 X-71201 1.00 .500 3.24 .50 2.75 7.75 .25 #1 X-71202 1.00 .500 3.24 .72 3.00 9.75 .25

.375 X-63754 .94 .624 3.19 .72 2.00 20.00 .50 #1 X-54962 .94 .624 3.19 .72 3.00 20.00 .50 #2 X-54963 .94 .624 3.19 .874 4.00 20.00 .50 #1 X-54962 .88 .624 3.19 .72 3.00 20.00 .50 #2 X-54960 .88 .624 3.19 1.062 4.00 20.00 .50 #3 X-54961 .88 .624 3.19 1.105 4.50 20.00 .50 #1 X-40759 .88 .749 3.19 .72 3.00 20.00 .50 #2 X-40760 .88 .749 3.19 1.062 4.00 20.00 .50 #3 X-57352 .88 .749 3.19 1.230 4.50 20.00 .50 #2 X-64237 1.00 .874 3.81 1.062 4.00 20.00 .50 #1 X-40765 1.00 1.062 3.81 1.062 3.00 20.00 .50 #2 X-40764 1.00 1.062 3.81 1.062 4.00 20.00 .50 #3 X-40766 1.00 1.062 3.81 1.230 4.50 20.00 .50 #4 X-40763 1.00 1.062 3.81 1.540 5.50 20.00 .50 #3 X-40761 1.26 1.374 4.81 1.374 4.50 20.00 .50 #4 X-40762 1.26 1.374 4.81 1.730 5.50 20.00 .50

40

Spindle Size .438 .438 .500 .500 .500 .625

.625

.625

.500

.500

.750

.750

.750

.875

.875

.875 1.125 1.125

1.125 1.375 1.375 1.375 1.375 1.625 1.625 1.625 1.625 2.125 2.125

---------------------------

Extension Adaptor Assemblies Part Numbers

Nut Key

Adaptor

Shank A.S.A. Assembly Adaptor NOSE Nut Size Taoer Number Number LENGTH" Number .250 .239 LX-84475-1 X-71190-1 1.50 X-71181-1

.250 .299 LX-84476-1 X-71191-1 2.00 X-71181-1

.312 .299 LX-84477-1 X-71192-1 2.00 X-71181-2

.312 .375 LX-84478-1 X-71193-1 2.25 X-71181-2

.312 #0 LX-84479-1 X-71194-1 2.75 X-71181-2

.375 .299 LX-84480-1 X-71195-1 2.00 X-71181-3

.375 .375 LX-84481-1 X-71196-1 2.25 X-71181-3

.375 #0 LX-84482-1 X-71197-1 2.75 X-71181-3

.437 .375 LX-84483-1 X-71198-1 2.25 X-71183

.437 #0 LX-84484-1 X-71199-1 2.75 X-71183

.500 .375 LX-84485-1 X-71200-1 2.25 X-71186

.500 #0 LX-84486-1 X-71201-1 2.75 X-71186

.500 #1 LX-84487-1 X-71202-1 3.00 X-71186

625 .375 LX-84488-4 X-63754-4 2.00 X-54959

.625 #1 LX-84489-6 X-54962-6 3.00 X-54959

.625 #2 LX-84490-8 X-54963-8 4.00 X-54959

.625 #1 LX-84491-6 X-54962-6 3.00 952623

.625 #2 LX-84492-8 X-54960-8 4.00 952623

.625 #3 LX-84493-9 X-54961-9 4.50 952623

.750 #1 LX-84494-6 X-40759-6 3.00 952624

.750 #2 LX-84495-8 X-40760-8 4.00 952624

.750 #3 LX-84496-9 X-57352-9 4.50 952624

.875 #2 LX-84497-8 X-64237-8 4.00 952625 1.062 #1 LX-84498-6 X-40765-6 3.00 952627 1.062 #2 LX-84499-8 X-40764-8 4.00 952627 1.062 #3 LX-84500-9 X-40766-9 4.50 952627 1.062 #4 LX-84501-11 X-40763-11 5.50 952627 1.375 #3 LX-84502-9 X-40761-9 4.50 952628 1.375 #4 LX-84503-11 X-40762-11 5.50 952628

Nuts Woodruff Rea'd. Kev

2 __ ww_w ________

2 ----------.. ----2 -.------_ .. _----2 --------_ .... ----2 --------_ .. _----2 ---------------2 --------_ .. _----2 -------_ ....... ----2 --------_ .... ----2 ------_ .. __ .. ----2 SM-1098 2 SM-1098 2 SM-1098

2 SM-1102 2 SM-1102

2 SM-1102

1 SM-1102

1 SM-1102

1 SM-1102 1 SM-1102 1 SM-1102

1 SM-1102 1 SM-1108 1 SM-1110 1 SM-1110

1 SM-1110

1 SM-1110

1 SM-1118 1 SM-1118

'LONGER NOSE LENGTHS AVAIALABLE--ASK OUR SALES REPRESENTATIVE FOR INFORMATION

41

SPINDLE SHANK SIZE SIZE .625 .375 .750 .500 .875 .625 .875 .625 1.125 .625 1.125 .625 1.375 .875 1.375 .875 1.625 1.062 1.625 1.062 1.625 1.062 2.125 1.375 2.125 1.375

Floating Tap Holders Specifications

A - Length-M10imum Nut Adjustment Il- Length-Maximum Nut Adjustment

A.S.A . . . ASSEM. NUMBER NUT ADJUSTMENT TAPER (MINIMUM)* A B

1 LX-76469~1 5.50 6.00 1 LX-76476-1 5.75 8.75 1 LX-76451-1 6.25 7.25 2 LX-76460-1 6.75 7.75 1 LX-76461-1 6.32 7.32 2 LX-76462-1 6.82 7.82 1 LX-76464-1 4.50 5.50 2 LX-76467-1 5.00 6.00 1 LX-76432-1 4.50 5.50 2 LX-76439-1 5.00 6.00 3 LX-76441-1 6.00 7.00 3 LX-76443-1 5.38 6.38 4 LX-76449-1 6.38 7.38

FLOAT· C

.625

.750 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

"LONGER NOSE LENGTHS AVAILABLE--ASK OUR SALES REPRESENTATIVE FOR INFORMATION

42

Spindle Snank A.S.A. 'Size Size' Taper ,625 .375 1 .750 .500 1 .875 .625 1 .875 .825 2 1.125 .625 1 1.125 .625 2 1.375 .875 1 1.375 .875 2 1.625 1.062 1 1.625 1.062 2 1.625 1.062 3 2.125 1.375 3 2.125 1.375 4

Floating Tap Holders Part Numbers

Asse,mbly' Adaptor Nose Number

, Number Number

LX-76469 X-76472 LX-76470 LX-76476 X-76481 LX-76477 LX-76451 X-76457 LX-76452 LX-76460 X-76457 LX-76456 LX-76461 X·76457 X-76452 LX·76462 X-76457 LX·76456 LX-76464 X-76466 X-76465 LX-76467 X-76466 X-76468 LX-76432 X-76434 X·76433 LX-76439 X-76434 LX-76440 LX-76441 X-76434 X·76442 LX·76443 X-76445 X-76444 LX-76449 X·76445 X·76450

43

Adaptor Key

Nut, Nuts , " Number " Rea'd. Kev

X-71181-3 2 N/R X-71186 2 X-3961 X-54959 2 X-70261 X-54959 2 X-70261 952623 1 X-70261 952623 1 X-70261 952625 1 KS-51 952625 1 KS-51 952627 1 KS-51 952627 1 KS-51 952627 1 KS·51 952628 1 KS-92 952628 1 KS-92

Drill Collets For Tanged Straight Shank Tools

ASA--Morse Ta )er and Drawina Number .239 .375 #0 #1 #2 #3 #4

X-84468 X-84469 X-84470 X-84471 X-84472 X-84473 X-84474 Drill Decimal Item Item Item Item Item Item Item Size Eauiv. Number Number Number Number Number Number Number

__ 61 .0390 1 1 1 1 ----------- ----------- ---------_ .. 1.00 mm .0394 1 1 1 1 -------_ .. -.. .. ---------- -----------. I

'--?o .0400 1--.2 2 2 2 I ----------- ... ---------- -----------59 .0410 3 3 ! 3 3 ----------- ----------- -----------

1.05 mm .0413 3 3 3 3 ------.. _--- ----------- -----------58 .0420 4 4 4 4 ----------- ... ----....... _-- ------.. _-_ .. 57 .0430 5 5 5 5 ----------- .. ---------- -----------

1.10 mm 0433 5 5 5 5 ----------- .. ---------- -----------1.15 mm .0453 ------....... _- ----------- 6 6 ----------- ""-------- --------

56 .0465 6 6 7 7 ----------- ----------- -----------3/64 .0469 6 6 7 7 ----------- ----------- -----------

1.20 mm .0472 6 6 7 7 ----------- ----------- ------------.--1.25 mm .0492 7 7 8 8 ----------- .. ---------- .. ----------1.30 mm .0512 8 8 9 9 ----------- .. ---------- ... -----------

55 .0520 8 8 i 9 9 ----------- .. -------_ .. - -----------1.35 mm .0531 9 9 10 10 ----------- ..,-------.. -- .. ----------

54 .0550 10 10 11 11 ----------- .. ---------- -----------1.40 mm .0551 10 10 11 11 -_ .. _------- .. ---------- -----------1.45 mm .0571 11 11 12 12 ----------- ... ---------- --------....... --1.50 mm .0591 12 r ___ 12 __ 1 13 13 ----------- .. ---------- -----------

53 0595 12 12 I 13 13 1 .. ---------- -------------1--- -- -.----~ .----.-1.55 mm 0610 13 ~ 14 14 1 ----------- -------------f--

1/16 .0625 14 14 15 15 2 ----------- ----------------_=-14--[ 1.60 mm 0630 14 15 15 2 ----------- -----------52 .0635 15 15 16 16 3 ----------- -----------

1.65 mm .0650 16 16 17 17 4 ----------- -----------

44


ASA··Morse Ta per and Drawino Number .239 .375 #0 #1 #2 #3 #4

X·84468 X·84469 X·84470 X·84471 X·84472 X·84473 X·84474 Drill Decimal Item Item Item Item Item Item Item Size ~ EQuiv. Number Number Number Number Number Number Number

1.70 mm .0669 17 17 18

I 18 5 ----------- --------_ ..... -

51 .0670 17 17 I 18 18 5 ----------- -----------, r-

1.75 mm .0689 18 18 I 19 19 6 ----------- -----------50 .0700 19 19 : 19 19 7 ----------- -----------

1.80 mm .0709 19 19 I 19 19 7 ----------- ---------... -, --1.85 mm .0728 20 20 20 20 8 ----------- ------------

49 .0730 20 2Q. __ 20 20 8 ----------- -----------i-- - ----- ... -1.90 mm .0748 21 21 21 21 9 ----------- -----------

48 .0760 22 ~. 22 22 22 10 ----------- -----------1.95 mm .0768 22 22 22 22 10 ------... ---.. -----------

5/64 .0781 23 23 23 23 11 ----------- -----------. . 47 . 0785 24 24 24 24 12 ----------- ... -----.. ----

2.00 mm .0787 24 24 24 24 12 --................. - -----------2.05 mm .0807 25 25 25 25 13 ..... _----_ ...... -----------

46 .0810 25 25 25 25 13 --------_ ... - -----------45 .0820 26 26 26 26 14 --------........ .. ----------

2.10 mm . 0827 26 26 26 26 14 ---... _ ... _--_ ... ...---... - ... ---.. 2.15 mm . 0846 ----------- ----------- 27 27 15 ----------- -----------

44 .0860 27 27 28 28 16 ----------... ---- ... -------2.20 mm .0866 27 27 28 28 16 ----------- -----------2.25 mm .0886 28 28 29 29 17 ----------- ---------.

43 . 0890 28 28 29 29 17 ----------- -----------2.30 mm .0906 29 29 30 30 18 --.. -------- ------------2.35mm .0925

~~ r·--;·~-.. --I ~; 31 19 ----------- -----------42 .0935 32 20 ----------- -----------3/32 .0938 30 30 32 32 20 .. _-_ .. - .. _--- -----------

45


ASA--Morse Ta per and Drawina Number .239 .375 #0 #1 #2 #3 #4

X-844S8 X-844S9 X-84470 X-84471 X-84472 X-84473 X-84474 Drill Decimal Item Item Item Item Item Item Item Size Eauiv. Number Number Number Number Number Number Number

2.40 mm .0945 31 31 33 33 I 21 ----------- -----------i-=:"":"::'4":':';:': 1 "-1--'.'::-09:-'6=-=0-t--=32 32 -, 34 34 - 22 -----------I--c-'--'---t--''=''':''::'':-'---I--- --- ,---.::..'-.-I---~-!- -----1-----+-----1 i-=2:...:.4..::.5.:..:m.:::m"-1--, . .=..09::...:6:.::5_t-_,3:::~:::_ 32 1 ___ =-34-'---+-_.__:3:..:4'__+-_=_2=.2---1_-_--_--_--_--_--+---_--_--_--_----1

40 .0980 33 33 '1_0.::3::::5_-1_--=::.35"--_1-_-.-.:.2::...:3'___+-_--_--_--_--_---1---_--_--_--_---1-l-=2:..:..5..::.0.c.:m.c..:m-'-t---C'..c..09,-,8C-'4_t-_,33 33 35 35 _..:::2:.:::3_-+---_--_--_--_--_-+---_--_---_--_---1 1----=-39-=-_ • .........: . .::-09"-'9:.::5_t-_3::..4:_ 34 36 36 24

2.55 mm .1004 34 34 36 36 24 38 .1015 35 -,,3:.:::5_+-_3::.:7_-+---=3'-.7 _


ASA--Morse Ta erand DrawinQ Number .239 .375 #0 #1 #2 #3 #4

X-84468 X-84469 X-84470 X-84471 X-84472 X-84473 X-84474 Drill Decimal Item Item Item Item Item Item Item Size Equiv. Number Number Number Number Number Number Number

3.10 mm .1220 47 47 j 49 49 36 ---------.- ------------ _ .. - -1/8 .1250 48 48 50 50 37 ---.------- ----------------------,

3.20 mm .1260 48 48 I 50 50 37 ----------- ------------'---··---t-----3.25 mm .1280 49 49 i 51 51 38 ----------- -----------•. _- -_.,,--,-- --·"49--1""'5-1 - .. "'-s2-T- '-39- ._----_._-30 .1285 49 ----------- -----------_._._-

- 50 r'-52' "-52-'-1-'-40 3.30 mm .1299 50 ----------- -----------t---.-- ---,. ,,--- "-'51-1--53-' -_.".,. --_." .... 3.40 mm .1339 51 53 41 ----------- --------.-. ---- --52--1 5-4-29 .1360 52 54 42 ----------- -----------~,-----

_ .. _--==~3__ I -'55 _

.-

3.50 mm .1378 53 55 43 ----------- -----------------_.", .--~---. 28 . 1405 54 54 i 56 56 44 ----------- -----------

9/64 .1406 54 -1~ .j-- 56 56 44 ----------- -----------. 3.60 mm .1417 55 57 57 45 ----------- ----------27 .1440 ___ 5L ... ~--..l-~~ 58 46 -.-----.--- -----------_.

3.70 mm .1457 57 57: 59 59 47 ----------- -----------.. - -_ .... - - .. --.--.;----------r' 26 .1470 58,58 '60 60 48 ----------- -----------.. .. -58-" j-S8 -";'-"60 - . .. _ .. _- --- -+--_ .. -_ . 3.75 mm .1476 60 48 ----------- -----------

~~~- ~:-r--~~-·· .... _---.-----

25 .1495 61 49 ----------- -----------3.80 mm .1496 61 49 ----------- -----------_ ....• _._ .. _. -------,------, --------"-----1----'--_·_- ------_._--

24 .1520 60 60 I 62 62 50 ----------- ----------------- _._,--,,-- --"'-". ----------t----- .. __ .- ----3.90 mm .1535 _6_1 _____ ~~ 63 .. 63 51 ----------- -------------,----

23 .1540 --.. ~~- j-- ~~ --j-- ~~ .. - 64 52 ----------- ---------------5/32 .1563 65 53 ----------- -----------._- -_._. __ ... ---------- t-- ------- _ .• -, •.• -------- _ ... _---- -_. __ . 22 . 1570 64 I I ----------- , 66 66 54 ----------- ---------------"'---"._-,-_. ---.--.--·r·--.. -·-·····-·---- -------,--- ----- ------, "-

4.00 mm .1575 6416466 66 54 i ----------- ------------_._,---~-6~--l-.~j5-·~I~67-~~l·· "6~i--'

------,----- . 21 .1590 55 ----------- -----------20 .1610 66 66 I 68 68 56 ----------- -----------

47

\---------------_. -----------------


ASA--Morse Ta er and Drawina Number .239 .375 I #0 #1 #2 I #3

X-84468 X-84469 X·84470 X-84471 X-84472 X-84473 #4

X-84474 Drill Decimal Item I Item I Item Item Item Item Item Size Equiv. Number Number Number Number Number Number Number

4.10 mm .1614 66 I 66 i 68 I 68 ! 56 i ----------- I ------------+-----=:..::.---1------- --- .. -------,-------1 1 4.20 mm .1654 ----------- 67 : 69 I 69 I 57 ! ----------- , -----------

=-19 .1660 -----:~:----. 67 r--6-9-----,'--69--1" 57 i ___ m_ I -------::;~ ~~ : ~ ~~; ~~~~~:~= :~~~ ~~;--~;~~~-~--~-~1~:---~-6;-~~;-+-~:~~~ --[i~~~==~~~~:::~:

I-'-"-'----t-----t------+---c--.------ ,- ------. - - ---;--- -----18 .1695 ----------- 1-- 69 I _...20 __ 70 1__ 59 .... - .. - ----

1 ~/;4 : ~ ;~~ ~~~::::~::~ rl _ ~~ In----;~ n _n ~~- - --- - ~~- ~~::~~~:::: ::::~::::::

~=4=.4~0~m=m=:=-...:....1'-':7:.::.32=-- ====_ ~ ::-~Z1_:-_+-~:-72 -__ : -: _-~ 72 ___ !. _:_6_1..= ---::-:.:::::::--- -----------16 .1770 ----------- j 72 73 73 I 62 I ----------- -----------

4.50 mm .1772 ----------- 72 173---731-62 ----------- -----------1------'=15...:.:.::."-l---' . ...:...18:...:0c.:O'--I----------=~:-~- -----73- ---I - -7;- --- --. i 4--1 --63 ----------- -----------

1---4-.6--'-r~-=--m-m-t-:-~ ~-=--~:...c..r· ~~ :~p.~ ;~--;f T-.:ef -~~~ :==:=:: : ~,;~ ~ m :=:=:=:: ;! I ;: -;~ --- ~; ~~~~~~~~~~~ ~~~~~~~~~~~

I----=-'-"--t---'--'--=---'---I--·---- -----i----------- ---.c...:.--f-----+----I 4.80 mm .1890 ----------- 78 i 79 79 68 ----------- -----------I---=-=-...:..:..::..-t-'--'--=--=-=--'--I------ -----.--.---...... ------.-.-.--.. ---.. -- .--- ----- ---+----1

12 .1890 ----------- 78 I 79 79 68 ----------- -----------1-----'-'11=----+-.1910 ----------- --7'9--Tso-- --'-80-' 69 ----------- -----------1-----:--,,--:--'---1---'-.:...::..:.=....--- .. --------. -.... -------.. -, - -------- ---------- --.. ·--:=::=--1----[----1

4.90 mm .1929 ----------- 80 '81 81 70 1------'=1 0...:.:.::."--1---'.--'-19::::3:..:5'---1_--~----::~----- ~ ___ ~o:= ~---8_~_=: -~=j..1~=r----70.--+-----------------+----------------1

1-'=-5:..::.0-=:~..:..:.m:.:..:.m'-+- ~-~~ ~~=~~;~;~~~:. = ~~=- --!~-. -. ----~~ -1-' --,,--:-;--'-l-+-~~-~~-~~-~~-~~-~ +---~~-~-~~-~~-~~-~~-t 48

,------------ ------_._----- --------.-~ -----.~ '-----_. __ ._------------------_._------- --


ASA--Morse Ta er and Drawinq Number .239 I .375 I #0 #1 #2 i #3 1 #4

X-844G8 I X-844G9 ! X-84470 X-84471 X-84472 I X-84473 , X-84474 Drill Decimal Item Item i Item Item I' Item I Item , Item Size Equiv. Number Number i Number Number Number Number I Number

5.10 mm .2008 -------:--- t ~.-:--~ .. ll--~··--t-- .J3_l_:---------- ~-==-:.-.:==-13~64 :~~;~ ~~~~~~~~~~~ ~~~--·-~·T ~~·····T····;!.L==~~=+==~=-

52; mm;~~ -==:::==t-:;: : f-~=[:~u~ i~r~~~~~~~~~~ ~=~~~~~~ 5 .2q~5 ~ ----=;~---- __ .8?_-l . . --87-.J~:n _87 =-.. -} . 76 ___ k--==:=J -~=-~------.

5.25 mm .2067 -----------; 87 ----------- I: -----------' 77 ' ----------- : -----------5.30 mm 2087 -----== I - 88 -it ·-SS-· 88-.1 -78---·~~-==~~--~ -: -~-==~-:

1----,-4 .___ 2090 r-:=~-:---~.~It~:= --88 ___ , ._~_I .~~ ~8 __ .l. ___ .7.§ ___ r=~~-=-=--~~j-==--~ 5.40 mm .2126 _____ m___ 89 : 8~1 89 I 79 : _m_m ___ I _________ __

3 .2130 ----------- t±=9 __ ··~W-89-:...-J9--! ----------- I -----------5.50 mm .2165 ----------- 90 . 90 : 90 ' 80 l' ----------- , -----------

7/32 .2188 m_~~ 91 L ~_1 -t 91 L~8-1__=lm-------- ! __ m _____ _ 5.60 mm .2205 ____ m ____ ! 92 . 92 I 92 ' 81 I _m ____ m I m _______ _

2 .2210 ~· __ m _____ I 92- -;··-92--·r 92 ·--;--8-1 .- .. j ---~~~---------5.70 mm .2244 m _____ m I 93 :m--93 --t·-93-:·· ·--82--T----mm : m ___ m~-:

I---".:.:....::...:..:..:.:~f--=:...:...:...-f----+l---=-----·:------i--·---j----·---··t--·---+-i ----I 5.75 mm .2264 ----------- l-- 94. ! ----------- I ----------- .' .. 83 i _m_m ___ i===:m--:.:..

1 .2280 m _____ m L_~.t? ___ L94 i mm:==.::...L... 84 ! ___ m _____ l:::.:::==-5.80 mm .2283 ----------- i 95. i 94 194 i 84 ' ----------- t -----------5.90 mm .2323 ------------1·-96-1-95-1--95-~- 85 : mm _____ ! __ mmm

1--"= . ...:..:..:.:"-11-=.0:..::..-1----+.-.-- j--- . i A .2340 ----------- 97 ; 96 I 96 ! 86 l ----------- I -----------

15/64 .2344 ----------- ~:=~I 96 -1' 96 -~.-- 86 i _____ m___ I _______ m_ I---c--'::-":"::"":'-ll-=:"':"':"'-- ......--. i ~----;--

6.00 mm _.2362 ----------- .L_.§l§ .. _ ... __ ~L-l_~Z_ :. __ .. _87 __ . I ----------- i -----------B .2380 ----------- ~ 99 ' 98 I 98 : 88 '----------- i -----------

....... ,----- --_ .. , ~-.. _-_ .. _- ._-',._'"-'----'------;'-_ ... ""--'_._-- -- ,-_.,,--6.10 mm .2402 -----------, 100 99 99 89 ----------- -----------

C --- -.2-4-20--' ------------------;-1 ·--10:;---·--100---:-100 -·-·~----9ci--'==== ! ----== 49

L


ASA··Morse Ta )er and Drawing Number .239 .375 #0 #1 #2 #3 #4

X-844G8 X-844G9 X-84470 X-84471 X-84472 X-84473 X-84474 Drill Decimal Item Item Item Item Item Item Item Size Equiv. Number Number Number Number Number Number Number

6.20 mm .2441 ----------- 102 . 101 101 L __ §_1 _ ----------- ---------~.:... --0-- .2460- --:=:.~~--~=-- -103i---1-~-j 102 i 92 ---------------------- --- ------------- -- ----:----------, --1'------- ---\----1

6.25 mm .2461 ----------- ----------- 102 102' 92 -----------~_O ~~- ==.~4-_ 80 - -------~~~-~=- -~j-94-:::.; _:- __ -f 0-3-- ----1---'-0-=-3 ----ij ----9-3 - -------------------+------------------1 -1/4 .2500 -=-=-~~~-_:::.:... _1 O~_i ___ 1~__ 104 --r-94 -----------

6.40 mm .2520 ----------- 1 06 105 105 95 ----------- -----------1---=':--=--:':":'- - -- ------.--f-------- -- ----'---"--_j-------f----I 6.50 mm .2559 ----------- ____ :1--'27 __ ----------- 106 96

F _ .2570 __ --===----~_=__~9~ ____ r-=-:_--_--_--_--_+_-----'-1 0-=-'7':-_+_---=9'-':7-_+_----------------_+_----------------1 6.60 mm .2598 ----------- 109 ----------- 108 _ 98 ---- ------------- -----,-------- ------------------/------1

G .2610 ----------- 110 . ----------- 109 ti 99 ----------- -----------I-~~--+~~~-~--~-~~i -~-+_--_+----_1 6.70 mm .2638 ----------- 111 ----------- 11 0 100 -------- ,----- ------ ------ '--'---+---+----1

17/64 112 i ----------- 111 1 01

!---=-6,--,-. 7--=-~---"m:.:;.m'-'--lI--=--=--:....-I----j-----~-=-~~~~~~~r~=:~-~~-~~-~-+-==~=~=~==:==~~~~~==:=~~=~~=~~=~~=~~=~ :=~~=_~=~~=~~=~~=:~ .2656 -----------.2657 -----------.2660 -----------

6.80mm 113 I_m ____ m 112 102 6.90 mm -114---1----------- 113 103

-----/--~~4_~~_1---+_---1

I ----------- ----------- 113 1 03

-.2677 -----------.2717 -----------.2720 -----------

7.00 mm .2756 __ -=:===--___ 11~ __ .:_===_:~_ 114 104 J2770_ -==-===-- 116 _~=-==--:..--~-:1-~- ___ 1:...0o--=--5----if----_--_--_---_--_-+------------------t

7.10 MM .2795 ----------- 117 i ----------- 116 106 K -~281 0--- -::=~~=----- 118 r~===-f-1~r 107 ------ ------ ------- , ----- ---.:..:::.:-+----+---4

9/32 __ _ .2813 --==-=--_---:._ ----------- i ----------- 117 ______ 1 0_7 __ 1_--_--_--_--_--_-+---_---_--_--_--_1 7.20 mm .2835 ----------- ----------- ----------- 118 108 ----- -----'--------t------\------C-----j---'---'--''----\--------j---I

1--,--7=.2:.::,5...:.:m",-m__'_'_t- .2 854 __ 11-----------------+------------------+_---_--_--_--_--_1 __ ---'---11:...::9 __ , __ ..:...1 0::.:9=-----\---_--_--_--_--_--+--_--_--_--_--_--~ 1--'--7~.3__=_0__'_'m~m _ __'_'_t----".2=,8~7-4~-I----------------_f_----------_--_--~-----------------_+_-----'-1~20=----_+_-----'-1~10=----_+_----------------_+_----------------1

L .2900 ----------- ----------- ----------- 121 111

50

L ______ ~~~ _________ ~ _____ . _________ .. _____________________ -________ --'


ASA··Morse Ta per and Drawin~ Number .239 .375 #0 #1 #2 #3 #4

X·84468 X·84469 X-84470 X-84471 X-84472 X-84473 X-84474 Drill Decimal Item Item Item Item Item Item Item Size Eauiv. Number Number Number Number Number Number Number

7.40 mm .2913 ----------- ----------- i .---------- I 122 I 112 ----------- -----------I----'-.:....:.:::..:..:..:.::..:......jf--=..:..=...--t- -+-----., ... L-.-----~ ... --.... -.i__---_+_.----M .2950 ----------- ----------- 1 -----------! 123 i 113 ----------- -----------

7.50 mm .2953 m_m~~_=_ ----------- !' m-m---~--?+----113 -___ m_____ m __ :~ ~~~1 :"::9,-,-/~6:':':4_ :.:.._-l~---'---'.2969 -.-:-:::.---~ ____ =:~.------ [--------;-, -~~_124_~! -~:;~ ----------- ---------_=_

7.60 mm .2992 ----------- -----.-----! ----------- I 125 i 115 ----------- -----------l----'-''':''''::'''';N .:.:.:..:..:.-+-..:..:. 3020 ----------- ----------- 1·-::===~1-126 '-'j--116- '====-j-~=::-::::::::::-1----'-.:.....·--11-:.:..:::.=-- --.-- ..... - ......... ~ .. -. "--- T" --.--- r .- .... ,.- --.-.. --.... -... --

7.70 mm .3031 ________ m ___________ 1 ___________ I 127 ' 117 ----------- m ____ m_

;:~~ ~~-:;~~~--- -=~==- :~~~~~-.~~~=- -~~~~=~~+-:.-~~-~~ ,-- ~ ~~ ~~~~~~~~~~~ ~~~~~~~~~~~ J----'----'---'''''''---'-+---.-.-. - --.--.------ -----,-.----------,.----------+- -----t------

5/16 .3125 ----------- ----------- -----------. 130 ..-l 120 ----------- -----------1-=8.:...:. O....:.O...:..m:.:.:m:..:......jf--.:...:. 3:...:.1..::..50-"--_1_-_-_--------- -----------, ----------- 131 I 121 ----------- -----------I----'O'----If--.:...:.3:...:.1_6::..9.__ ---~.:-=:::::~_ ~~::.-_~~_~.-:~~J:.==-- -132j--

i.--- 1 ?~ __ .::----:::::::... -==.-.::::=_ 8.10 mm _3 H:l9 ----------- ----------- I ----------- 133 123 ----------- -----------

1-"-8:...:.2-=-0..:.:m.:.:.:m"-l---=-.-=3-2.:...:2:..::8·--_-~~~~::-~ ~--:=:::~~T~=::~----~-I~- 1:~~_-' _I. :~~i?4 -~ "::::~:'==-I"::::'-==-~-p .3230 ----------- ----------- i ----------- 134 i 124 ----------- -----------

J----'-8-.3-0-m-m-t·-.-32-6-8-- -=~== -:::-:::::=1 .. ::=:::----=~--135 .. -- \,,--125- ~==:--____ m:=~ 21/64 .3281 - ----------- ------==:- i-:::=--:= ----1-36 i. 12~----.------- -----------r-- -----,--

8.40 mm .3307 ----------- -----------, -.---------. 137 i 127 ----------- -----------

:: ::!!~ ~~~:~~~~~~~~~~~':~rf=r~~ t~~~~ t-------'-R ______ :~390 ___ -:~:._=:~:::-I- -=:_~ .. ~:::=. !" -=:::===;:~-,--:1~O-- -1 :-1"3o ___ j_.-:-.:.-_:~=_~-=- -----------

8.70 mm .3425 ----------- 1 -----------! -----------! 141 131! ----------- -----------I------'-'-'----'-----'-f.- .--.---.-- -- ... -...... ---- I -.... -. - ... i·- .. ·- .• - .. -- ... --- -.. . - -.--j---.-----.--.-- '--"--'---11/32 .3438 ----------- I ----------- ----------- i 142 1 132 . ----------- -----------

8. 8~ mm :~~-=~~i=~~~~~~~+~-~~~~~~~~~~~:=~~~~-~~~-l~~ ~f+-+~~=0~:~~~~~:~--~~~~~~=-51

r-~==~~~==-==-====--.-__ --__ Drill Collets

For Tanged Straight Shank Tools

.239 X-84468

ASA--Morse Ta :>er and Drawing Number .375 I #0 #1 #2 #3

X-84469 X·84470 X-84471 X-84472 X-84473 #4

X-84474 Drill Decimal Item Item Item Item Item Item Item Size Equiv. Number Number Number Number Number Number Number

8.90 ~~ _}~~_ -=~~~:~-=~- ---------::.-i--:-:::===. __ 145 __ 135 ----------- -----------2:9Q.rnm_ .3543._._ -==~.-.---_=_ -----------. i :~---------+'-_ 146 ___ ~_36 T .3580 __ 00_00____ _ __ 00 ______ 1 hn_______ 147 137 ___ 0000 __ ._ _00 ___ 00_00 t-9-.1-0'-~-m'- ~3583 - --=~--:~~=- --~~~------- ----------- -147-1 137 ----------- ----------------.- ----'. --- ---.- -- - -r ----- ---- - -------i----t-------t • _:0:.;23,-,-/6=---4:..._ .3594 ... --------- ----------- I ----------- 1 148 138 ----------- -----------,- .. -- ---- I -. .

9.20 mm ~36~L -=-:.-.---_==----, :-:.-:-.:-==----I ~:=-=-== ,_ J 49 _1 ____ 1 ;'l,~_ ----------- -----------9.30 mrl1 __ .3661 __ -=-__ --==-' --.----:-.::.-: __ 1. -__ --~==~._I-. 1.!5L. L _ ~O _ __ ---------._- _ -----------

, I ' . I U _ _ 36~0 --==-.::== i. ---------_=____ :---==:.:- : __ . 15 ~ ~_---.!.i.1 _ I -:--------- -----------9.40 mm _. 3JQ). ~.::.=:~_= j --::::-.:-:--=J::-.-===--i .. ..152 _ 14~_r-=-~-------- -----------9.50 mm _ .3740 __ m_mh 00 _________ i __ m ____ n I 153 143 1 _____ hm _

_ ~~___ .3750 -.::-:~--= __ -~:::-.::-:~:.:--=-:=:.::=:- 1. __ 1~~ --T-- 144 1 -----------V .3770 ----------- ! ----------- i ----------.::.J -----------1 144 2 -----------

1-_ -9.-60--'-';;;;'- .3iao.: .. ".:.~-. f:-O-'::-:~i:-~::-:-J=--: ~-·,46= 3 ------::: 9 70 1lJ.~ ~~_19 _____ ==:-m-- -:=:--==~-~::====--r ---=-:=_1 147 4 __ m __ h __ 9.80 mm .3858 ----------- -----------. ----------- I -----------, 148 5 -----------

W -- -jsEio-- ==~:~--=T~~= __ ~=~- :-~~~-~~=~ r~~-:~~-~=- ----148-+-- 5 ------------990-m!!l .38~8 ~. --~=~--~---t=~~~=--j.::--=--;-~~:~T --=:~:--=~=-11 149---t-6'- r---.:=-~~ __ " ___ _

1 . I ) l 25/64 3906 ----------- . ----------- ; ----------- i 159 I 149 6 _________ 00 _1 OJl~-r.nm-~:}~ ~ .•.• -·-~~-~~~~~~~~~i ~~=~=~~~~~·'i' ~~~:=~~~=-~=-~;: -=:=~~~~~i~r==r~~=l--~ --.= . ~~~~~~~~~~~ 1 0 .1_Q.-~~: __ j~i§~~_ .~~~~~.:~~-~.~I :~---~-~~~~I;~.~:-~~-::~=E~~~~~=~=-~~l--~-.:! ~i=-_·~I~~-:: 8 __ :----------

_~0.2i~-~ • ~~~~_ .-~~~~~~~=~-_I~-~~~~-=~=~-\-~~~~~=~~=~+~~-~~~~=~~-~=~~l~--~~~=t 190 _ ~~~~~~~~~~~ . 10.30 mm .4055 ----------- ! ----------- , n _________ I -----------! 154 , 11 I -----------

-13/3-2---- -.4063-- .----------- ! _______ n~~: : __ n ______ .---~------= 1'154': ·---11------j-:=-==-W.40-;~;~- -. 4094--~:-~-::--~: i __ n_~_:_::: -------:~:: ----------:;. -155-T----1-2----r---=-~~--------

52

-------------------------------------------- ---------------- ----


ASA--Morse Ta er and DrawingNumber .239 .375 #0 #1 #2 #3 #4

X-84468 X-84469 X-84470 X-84471 X-84472 X-84473 X-84474 Drill Decimal Item Item Item Item Item Item Item Size EQuiv. Number Number Number Number Number Number Number

Z .4130 _ -=-=--~~==- ~:---===~_~~~-------- ----------- .I--J 56 13 -----------10.50 mm .4134 ----------- ----------- i ----------- ----------- i 156 13 -----------10.60 mm .4173 ---- -=-~--~~~==- -=---==~_r::----------' ----------- r-1-57-r--- 14 -----------1--'-'=-=-'-'--'--'-1--------- -- .----.,.--.- -.----.. -.------;-------------.--+------1

1--'-'1 0:.:.._7c..::0:...;m;..:.:m,'-'-+__' .. ...:.:42=-1:...:3'---1_-_--_-.-_--._--_-- ---:~-----------i..::~--------~-- _____ mm 1 __ 1:.,:5:.::8'---+_-----'-'15=---+--_--_--_--_--_---1 27/64 .1219 ----------- ----------- I..::-=:==:__~~--------- I _1-'-5_8=---_1-_1_5 __ 1_--_--_--_--_-----1

10.80 mm .4252 ----------- ----------- ----------- ----------- 159 16 .---- --.--+---'-"----+--'-"----1-----1 17

-----10.90 mm .4291 ----------- ----------- ----------- ----------- 160 11 .00 mm __ 4_33..1 ___ 1_--_--_--_--_--_-t-----------------+_-_-_---_--_--_--. ___ ----:~_--_--_--I_...:1..:c6..:...1 _f--_1;..::8_-+---_--_--_--_---j-11.10 mm .4370 ----------- ----------- ----------- ----------- 162 19

7/16 .4375 ----------- ----------- ----------- ----------- 162 19

~~.:...:~~:~::.:::~~~"'-~'_'___f_~:::~~ =~= -=~~~~~~~I==~ -===~~~- ----'~-"~.::.~-f----=~:.::~'---+-~---~~-~~-~~-~~-~I ~ ~ ::~ ~~ :::~~ ~~~~~~~~~~~ ~~~~~~~~~~~ 1 ~~~~~~~~~~~ -~-~~-~~~-~~-~~-~-t--~;..::~..:c~-t--.....:;=~=----+-~-~~-~~-~~--_~~-~I

29/64 .4531 ----------- ----------- -I ----------- ----------- 166 23 11.60 mm .4567 ----------- ----------- ----------- ----------- ---1~ 6-::..:7'---+-----=-24=---+-----------------1 11.70 mm .4606 ----------- ----------- ----------- ----------- 168 25 11.80 mm .4646 ----------- ----------- ----------- ----------- 169 26 11.90 mm .4685 ----------- ----------- ----------- ----------- 170 27

15/32 .4688-=-~_=~~ ~-:----:~-- T~===- ~=-=-=-=- - 170 27 ~~~-+~:..::..:c~_ , ~~-r-~--+_---I .-1.:..:2:.::. 0::..::0:...:m;..:.:m--,-+--, . ..:...4 7:.,;:2:...:4_1--------------- ----------- I ----------- ----------- 171 f___-=2=-=8---t------------------l ~1.:..:2::....1:....::0:...:m;..:.:m_"_t--'.-4'-7c..::6'-:'4-1-----------~------~ -:=---===-1 ___ m_____ m_m ____ -----1-72-- 29=---+-_--_--_--_--_---1

~ ~3~~6~~ .:~:~ -=~=--=~~~~== =~::::: ---~ ;'-:--t--~'-'r--t-::-~~-~~-~:-~~~-, .-1-2-.4-0"'-m-m-+-.-48-8-2-1----------------- ----------- I ----------- ----------- 175 32

53

[


ASA--Morse Ta er and DrawinCl Number .239 .375 #0 #1 #2 #3 #4

X-84468 X-84469 X-84470 X-84471 X-84472 X-84473 X-84474 Drill Decimal Item Item Item Item Item Item Item Size Equiv. Number Number Number Number Number Number Number

12.50 mm .4921 _ -=:.~------ ----------:L-=-==-==:- _ -----------1__ 176 33 -----------1-1'-"2'-.6'""'0-'-m""m-'-'-t-----'-.4-9'-"-6--1-- ----------- ----------- I ----------- ----------- I 177 34 -----------

12.70 mm . 5000 -- -=~------ ----------- T~===- ------------ r 178 35 -----------!-'-':::..:....:1/:...:2"=-t--..c. 5000 ----------- -----------l--~~-====- - ----------- r 178 35 -----------1------'-'-=---1-----' -- -------., ----------- -- -+-----~-+_---=-=--+_---·I 1---'-'12::.:,. 8::.:0:..;m.::.m'-'--'--l-----'_ 59_~L _-_----::---- -----------_; __ ~:==::::- _, . --~:_---_--:::!_ !?~ ____ 3::.:6=----+--_--_-_-_--_--_--1--1:,::2::.,:.9:,::0c.:.m:,.::m':':'I----'..::5."079 ----------- ----------- i ----------- I ~----------! _ .:.18::.:0'------+--=-37':--1 __ --_--_---_--_---1

13.00 mm .51--;18- -=~~~==--~~~=--~==-r=~~==--I-~==--;-·181 38 1-'-"--'--33:..c/6-'-4:....cc.-I----'-. 5-'-1-5-6-1-------~==- -~~==~-=:-=-r--=~--~=--=r-=~--==- -- 182 39

13.10 mm _.j~_?i=- .:__-_:=~:---.:::: ~_=;~~-:~-_=+-n=------~~~-~~-:;n:.:--=- ___ l~L.... ___ ;:.39=---+-_--_--_--_--_--_1 13.20 mm .5197 ----------- ----------- i ----------- ----------- I 183 40 13.30 mm . 5236 -:-.-'-:_=_~=:_. _ :':-.::-':__=':-:- l..::::::-.::::::=- __ :::::_-__ :.::::::.1 184 _4.:..1:_-+------------13.40 mm-t--'-.~,27~ __ .:::::::-:---- ----------- j ----------- ----------- j 185 42

17/32 .5313 _ _: __ =-=-=-=--- ...:::::=:----- I..::::::===- -----------\ 186 43 13.50 mm .5315 ----------- -----------! ----------- ----------- 186 43 13.60 mm .5354-- - -==-~:----I===-- r ~===~=- =-:= __ ::::::-i----'--1-'-87~-f--4'-.::4--+------------------f 13.70 mm .5394--- -=--==~- ~=:---=~--;-=-~~~-=--- -1-=-~=-= 1 --'1-i3i3' --- 45 -----------13.80 mm .5433 ----------- ----~-=-~=T=:~--=~-=T=~~~~~--- 189-t---4:.::6--+-----------------I

1----'-3_5/_64_-t ___ ~459 ____ =:~:=:: __ =--:::::_:_~-_~ L -.:.-::=::.:.:: __ .::~::=_::==__ __ -'-'19::..:0'----+ __ 4.:.7':--+_--_---_--_--_---1 13.90 mm .5472 ----------- -----------! ----------- ----------- 190 47

1--'--'--'-'-CCc.:..:.II----'-"---'--- -------.- ------- -" -1- --- ----- ---------1------/----1-----1 14.00 mm .5512 ----------- -----------! ----------- ----------- 191 48 ----------------- --_.--------- _._--". __ . __ ._- .. ----_._-------j-------- ---14.10 mm 5551 ----------- -----------! -----------1----------- 1 192 49 -----------14.20 mm -~?591 ___ ~ . n.::::--= ___ =--: ~~~;~:~~~~~T=-~~:~=~~~~:::::---::-=-:=J---..1}3 50 00-------00 14.25 mm_:?61 0 _____ ':_:_:::=='-::':_: ___ :::-::,:::.::::::::.:. _.:::-=_~::.:=.:_-L __ l~4 51 -----------

9/16 5625 ----------- ----------- I ----------- I ----------- I 195 52 -----------1---"--'-'--- --0------ ---------- ---- _MOO. ---. l--------- ------ --------- ---=-=---- -----=-='------j----J

14.30 mm __ 5630 _ _=_-::::=-=- I..::=.::=--.:::::=-~====-_ ----------- ___ J.~6 53 -----------14.40 mm .5669 ___ oM_oM_Mol ----------- ! ----------- ----------- 197 54 -----------

54

L ______________ -_______ ~ ______________________________________________ -----'


ASA--Morse Ta Jer and Drawin~ Number .239 .375 #0 #1 #2 #3 #4

X-S44GS X-S4469 X-S4470 X-S4471 X-S4472 X-S4473 X-S4474

55

I ~------ -----------------"---------------------


ASA--Morse Ta er and DrawinQ Number .239 .375 I #0 #1 #2 #3 #4

X-84468 X-84469 X-84470 X-84471 X-84472 X-84473 X-84474 Drill Decimal Item Item I Item Item Item Item Item Size EQuiv. Number Number Number Number Number Number Number 41/64 _6406 ----------- ----------- I ----------- ----------- ----------- 78 23

16_30 mm .6417---- --::::::~~:----- __ m_m_=--! m __ mm ___ m_____ _ ____ mm 79 24 16AO mm .6457 - - -=-~.::.------ ----------- r====------------- ----------- 80 25 ~'----:- '--"-""----- --- -" --- ------"-1---------.------ ----t--=--j----==--I 16.50 mm .6496 ----------- ----------- I ----------- ----------- ----------- 81 26 16.60 mm _ ==~~~5 - ----_~--=--_~~~~--~---_~::=-;~~~~:-----] _-=_-_~_==~~_~~-,: ~~-~~~=----- =-~jl2- 27

21/32 .6563 ---~------- ----------- j' ----------- I ----------- L -----'-----1 83 28 16.70 mm . 6-EiJ5 ---=-~=:~-=-':-I :=-~:-~~=-~:---- _-~~:::------~~f:._~:;;::~.::.-=-_I-~-~~-:-~~~-- --84 r--29-16.75 mm _.65~4 ""::::::::===--L=-~----~--=--'--~=~:==:J:~~~:-:---- -----------__ 85" 30_ 16.80 mf!!... _. E>?L4._ .... _:_:-::::::=-=- ':::::::::::=- -=:-===:I_:::::::~:=_:~ __ :::====-- I 86 31 16.90 m

natco/carlton spindles - lucas precision · 2020. 11. 26. · natco/carlton spindles for all of...

Documents