ISO 9001Network electronics is iSO 9001:2000 certified.

The iSO 9001:2000 certification of Network electronics’s

systems and internal routines is a proof of our commitment

to steadfast quality improvement throughout the

organisation.

in today’s demanding business environment, this is an

important certification both for the manufacturer and even

more important for demanding customers who do not want

to spend time auditing suppliers.

as part of the iSO 9001:2000 certification, an independent

accredited board will carry out annual audits of the

company’s systems and routines.

NEBS LEvEL 3Many products from Network / VPg have been tested to

verify their compliance with the requirements of NebS (or

“Network equipment building System”) level 3. Products

that meet these stringent environmental safety and

electromagnetic compatibility standards are qualified for

use in telecom central office environments in the united

States, and customers around the world recognize the

level of reliability indicated by a NebS level 3 certification.

The specifications for NebS are managed by Telcordia

Technologies

(www.telcordia.com).

ROHSroHS – the restriction of the use

of certain Hazardous Substances in

electrical and electronic equipment is

an eu directive banning electrical and

electronic equipment containing more

than agreed level of certain hazardous substances from 1

July 2006.

it is very important that manufacturers show commitment to

the outside environment, and many customers, even outside

europe, ask for roHS compliance at tender stage.

both Network electronics’ product lines VikinX and Flashlink

are compliant with the requirements of Directive 2002/95/

ec on the restriction of the use of certain Hazardous

Substances (roHS).

WEEEOne of the challenges in the world is the

growing amounts of electronic equipment

(ee) waste that is not sorted and treated

properly. Network electronics has

implemented return facilities for all products that we bring

to market.

Network electronics is fully compliant with the requirements

of Directive 2002/96/ec on the Waste electrical and

electronic equipment (Weee).

Nemko

Certification NORWEGIANACCREDITATION

QUAL 001

Certificate no. 900752

ISO 9001 Certified

3network-electronics.com |

Chapter 1 VPg intro page 8

1.1 vENtuRa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Ventura chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 element Management . . . . . . . . . . . . . . . . . . . . . . . . 13 Monitoring and Test System . . . . . . . . . . . . . . . . . . 16 Time Division Multiplexing . . . . . . . . . . . . . . . . . . . 18 SONeT/SDH Network interfaces . . . . . . . . . . . . . . . 25 Wavelength Division Multiplexing . . . . . . . . . . . . . 26 converters and embedders/De-embedders . . . . . 30 Single channel Fiber . . . . . . . . . . . . . . . . . . . . . . . . . 44 High Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 iP Network interfaces . . . . . . . . . . . . . . . . . . . . . . . . 64 Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Speciality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 SFP Selection index . . . . . . . . . . . . . . . . . . . . . . . . . . 76

1.2 PLuS SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Monitoring and Test System . . . . . . . . . . . . . . . . . . 78 TV-1 Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 TV-c Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Chapter 2 Network intro page 102

2.1 FLaSHLINk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Flashlink Housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 N-bOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 MOT-bOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Flashlink Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 System controller (gYDa-Sc) . . . . . . . . . . . . . . . . . 110 Modular Distribution amplifiers . . . . . . . . . . . . . . . 112 embedders/De-embedders . . . . . . . . . . . . . . . . . . . 116 HD to SD Downconverter with Framesync and arc . . . . . . . . . . . . . . . . . . . . . 129 Video conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 audio conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Synchronisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 automatic changeover Modules . . . . . . . . . . . . . . 136 eO and Oe converters . . . . . . . . . . . . . . . . . . . . . . . 137 Time Division Multiplexers . . . . . . . . . . . . . . . . . . . . 146 rF over fiber Modules . . . . . . . . . . . . . . . . . . . . . . . . 147 Datacom interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . 148 rS-422 and gPi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 automatic Protection Switching and Optical Distribution . . . . . . . . . . . . . . . . . . . . . . 150 2 ch. WDM – Optical Multiplexing . . . . . . . . . . . . 151 Optical Multiplexing . . . . . . . . . . . . . . . . . . . . . . . . . 152 Optical Multiplexing / cWDM . . . . . . . . . . . . . . . . 154 Optical Multiplexing / DWDM . . . . . . . . . . . . . . . . 155 eDFa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 iP gateways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Flashlink Micro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Distribution amplifiers . . . . . . . . . . . . . . . . . . . . . . . . 163 embedders/De-embedders . . . . . . . . . . . . . . . . . . . 164 Video conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 audio conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Synchronisation Modules . . . . . . . . . . . . . . . . . . . . . 165 automatic changeover Modules . . . . . . . . . . . . . . 165 eO and Oe converters . . . . . . . . . . . . . . . . . . . . . . . 166 Datacom interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . 167 Flashlink Micro accessories . . . . . . . . . . . . . . . . . . . . 167 1ru compact Distribution amplifiers . . . . . . . . . . . . . . . . . 168

Flashlink accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

1.3 BRavONEt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 bravoNet chassis and Power Supply . . . . . . . . . . . 84 element Management . . . . . . . . . . . . . . . . . . . . . . . . 86 Monitoring and Test System . . . . . . . . . . . . . . . . . . 88 aSi Multiplexer/Network adapter . . . . . . . . . . . . . . 90 aSi/SDi 270 Multiplexer/Network adapter . . . . . . 96 aSi/SDi Protection Switching . . . . . . . . . . . . . . . . . . 100

2.2 vIkINX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 VikinX Sublime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 analog Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 analog audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 SD Digital Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 3g-HD Digital Video . . . . . . . . . . . . . . . . . . . . . . . . . 177 Digital audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 rS-422 Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 VikinX Sublime accessories . . . . . . . . . . . . . . . . . . . 180 VikinX Modular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 Modular Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 SD Digital Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184/186 HD Digital Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185/187 analog audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Digital audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 Telecom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 VikinX configuration, control and Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Direct and remote control . . . . . . . . . . . . . . . . . . . . 191 control and Monitoring . . . . . . . . . . . . . . . . . . . . . . 192 ethernet connections . . . . . . . . . . . . . . . . . . . . . . . . 193 control Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 VikinX Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 VikinX compact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 analog Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 analog audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 component analog Video . . . . . . . . . . . . . . . . . . . . 206 SD Digital Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Digital audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Telecom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 rS-422 Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212

VikinX accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 Power Supply Frames . . . . . . . . . . . . . . . . . . . . . . . . 214 Desktop Power Supply . . . . . . . . . . . . . . . . . . . . . . . 215

2.3 NEtCaRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216

contents

The global Video Transport leader

Network electronics designs, manufactures and

markets a portfolio of video transport solutions

of unrivalled breadth and depth.

The acquisition of Video Products group, inc.

(VPg) of Oxnard, california in January of 2008

has further enhanced the company’s global

presence and reputation for providing industry

leading solutions to the video, broadcast and

telecommunications markets.

Network electronics’ competitive solutions

are highly functional and deployment-proven,

creating future-proof transport architectures

that fully meet campus, short-haul, metro and

long-distance.

For contact information:

www.network-electronics.com

6 | network-electronics.com


ventura• SONET/SDHandIPnetworkinterfacesand

multiplexers

• JPEG2000andMPEG-2encodersanddecoders

• Opticalmultiplexing;CWDMandDWDM

• Multi-formatmetropolitantransport

• Carrierclassspecificationsandfeatures(NEBS)

Flashlink• Fiberoptics


• Timedivisionmultiplexing

• Signalprocessinganddistribution

• Highlycost-efficient

• Verycompactandlow-power

vikinX – routing range• VikinXSublime

– ethernet control

– 3gbps single link support for 1080p HDTV

– ultra low power consumption

– Sizes from 8x8 to 64x64

• VikinXModular

– HD-SDi, SD-SDi, analog audio, aeS/ebu

– configuration up to 256x256 with

increments of 32x32

network-electronics.com | 7

Ventura

vERSatILE SOLutIONSThe Ventura™ line of modular signal transport solutions

is designed with carrier-class specifications and features in

mind. Whether it is dark fiber transport, telco interfacing to

SONeT/SDH or iP with or without signal multiplexing, the

Ventura platform fulfils today’s and future signal transport

needs. The NebS-compliant Ventura platform can transport

analog or digital video with associated audio as well as

data in a variety of formats, thus providing probably the

most versatile products for high quality content delivery.

JPeg 2000 and MPeg2 compression schemes enable video

transport over a wide range of network interfaces and bit

rates.

FLEXIBLE NEtWORkSVentura products provide conversion and transport

solutions for non-compressed analog and digital optical

signals, mostly in the metro area network environment.

The extensive selection of Ventura cards and space-

efficient Ventura chassis enable customers to create flexible

networks—networks that support a wide variety of formats,

recover nimbly from signal interruptions and provide a long-

lasting return on investment.

adaPtaBLE CaPaBILItIESThe Ventura line supports all video formats, as well as

ethernet, rS422, DS3 and 155Mbps signals. The VS103 3ru,

10-slot chassis and the VS101 1ru, 3-slot chassis can each

run on ac or Dc power, are compatible with all Ventura

cards, and meet the stringent requirements of NebS level

3 compliance. Ventura cards are hot-swappable, and in

many instances are field-configurable, using SFP modules

to support cWDM, DWDM and 1310/1550 transport.

Ventura equipment protects signal integrity with integrated

HD jitter attenuation, sub-millisecond recovery from

signal interruptions and a self-configuring browser-based

management system.

Network / VPg is extending the Ventura line with the

introduction of new modules developed to facilitate the

compression, transmission and economical transport of HD

signals. The new modules, including a JPeg 2000 encoder

and decoder, an 8-channel SONeT/SDH multiplexer and

de-multiplexer, and a universal analog digital video/audio

adapter for fiber optic transport, provide Ventura customers

with greater ability to meet the challenges of transporting

high definition signals and managing diverse legacy and

emerging signal formats. The compression and long

distance interfaces extend the reach of the Ventura line, and

the universal conversion capability enables customers to

adapt to evolving regulatory requirements in metropolitan

networking.

kEy FEatuRES• Metropolitanareaandlongdistancenetworking

• SONET/SDHandIPnetworkinterfacesandmultiplexers

• JPEG2000andMPEG-2encodersanddecoders


• Carrier-classspecificationsandfeatures(NEBS)


braVOnet

PluS Series

ROBuSt BaNdWIdtH OPERatIONSbraVOnet is Network / VPg’s high port-density, carrier-class

transport product suite that provides telco operators and

broadcasters with a solution for transporting multiple DVb-

aSi signals and different video formats over SONeT/SDH

and PDH telco networks with an unmatched bandwidth

utilization.

OPtImIzEd REaL-tImE PERFORmaNCEbraVOnet boasts the highest aSi payload in the industry,

with up to 16 aSi streams on DS3 and Oc-3 networks. like

the Ventura line, braVOnet provides carrier-class, NebS

level 3 compliant, transport, but braVOnet specializes in

optimizing the structured formats and multiplexing for

long distance. customers select braVOnet for bandwidth

efficiency, such as its ability to carry two aTSc-HD channels

on a single DS3 line, or for slipless aSi switching—

technology that transforms a signal-break event from a 7 –

10 second viewer annoyance and advertiser nightmare into

an imperceptible switch to the alternate signal source.

FEatuRES• ASIbandwidthoptimization

• MaximizesASIpayloadcapacity

• Simultaneoustransportofmultiplecompressedand

uncompressed digital video signals

• Manages,controlsandprotectseachtransportstream

individually

• Duel-channelintelligentsliplessswitching

• Fulltransportstreamprotectionfordigitaltelevision

networks

POINt-tO-POINt FIBER OPtIC tRaNSPORt SOLutIONS TV-c PluS encoders and decoders perform high quality

MPeg2 compression of SDi or composite video as well as

analog or digital audio. TV-c PluS comes with a variety

of interfaces for SDH/PDH, iP and DVb-aSi networks. The

intuitive graphical user interface of the TV-c PluS software

shortens setup time and eases operation.

FOCuS ELEmENt maNagEmENt SImPLIFIEd dEPLOymENtThe Focus product line supports sophisticated signal

integrity analysis and trouble-shooting of transport

equipment––whether the equipment is from Network /

VPg or another vendor. Focus products combine attractive

value and space efficiency with the convenience of a Web-

based interface. in addition to monitoring and providing

automated alerts for DVb-aSi, SDi, SDTi and associated

audio signals, these element management products provide

tools to simplify deployment of a standard template of

chassis and cards to multiple remote locations.

COSt EFFICIENtNetwork / VPg’s element testing and management solutions

offer high visibility and powerful troubleshooting tools at an

extremely low cost per channel. every level of eTr 101 – 290

reporting for up to sixteen channels can be made available

from a 1ru monitoring system. Network / VPg network

management products are designed to achieve a maximal

result with a minimal cost of ownership.

9


aC POWER SuPPLy (INtERNaL) CHaSSISVoltage 90-250Vac, 90-264Vac

Power 60W

Frequency 47-63Hz

current 1.1a max

efficiency 82% typicalWeight 10.0 lbs. (4.5 kg)

ELEmENt maNagEmENtOptional advanced element management features SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls for Ventura series cards installed in a VS101 chassis. The element management card is installed over the power supply so that it does not occupy or interfere with card slots. an rJ45 connector is located on the rear of the chassis for access to the network system. an rJ11 jack is also provided for connecting an rJ11-to-Db9 converter cable for serial access.

PHySICaL aNd ENvIRONmENtaL# of card Slots 3

rack Space 1ru x 19” rack

Dimensions 1.75” x 19” x 14”

cooling Field serviceable fans

grounding Nut use 18 aWg or thicker

Operating Temperature 0 ˚c to 50 ˚c chassis ambient

Storage Temperature –40 ˚c to 85 ˚c ambientrelative Humidity 5% to 85%

REduNdaNt aC POWER SuPPLy (EXtERNaL)Voltage 90-264Vac

Power 50W

Frequency 47–63Hz

current 1.35a max


dC POWER CHaSSISVoltage 35-72 VDc

Power 50W


REduNdaNt dC POWER SuPPLy (EXtERNaL)Voltage 35-72 VDc

Power 50W


ORdERINg OPtIONSVS101-3-ac 1ru ac Ventura chassis with 3 card slots

VS101-3-PSac internal power supply

VS101-3-rPSac redundant ac power supply (load sharing board included)

VS101-3-Dc 1ru Dc Ventura chassis with 3 card slots

VS101-3-PSDc internal Dc power supply

VS101-3-rPSDc redundant Dc power supply (load sharing board included)

VS101-3-eMS built-in comprehensive element management

VS101-3-aeMS built-in advanced element management

1Ru Chassis for the ventura Series

vS101-aC / vS101-dC

chassis

VeNTura

1.1

• BothACandDCversionsavailable• 3slotsforanycombinationofcardsfromtheVenturaseries• Single,field-replacablepowersupplyincluded• Asecond,external,field-installablepowersupplyoptionisavailablefor

ac or Dc which includes a dual redundant load-sharing board•Hotswappablecardsinanyslot• Fieldserviceablefans• TransparentfrontpaneltoviewcardLEDs• Slidingfrontpanelforcardaccess• 19”rackmountablewithremovableflangeforcenterorwallmounting•OptionalAdvancedElementManagementSystemthatprovidesremote

status, alarms and configurations via SNMP and ethernet, without occupying a card slot

•NEBSLevel3-compliantDCversionforcentralofficeapplications


ELEmENt maNagEmENtFcS183-aeMS features SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls for Ventura series cards installed in a VS103 chassis.

PHySICaL aNd ENvIRONmENtaL# of card Slots 10

rack Space 4ru x 19” rack

Dimensions 5.25” x 19” x 14”

Weight ac chassis: 11.22 lbs. Dc chassis: 10.93 lbs.

Power input connectors ac–iec320 Dc–3 way terminal screw

Fuse ac–4a/250V Dc–5a anti-surge

cooling 3 field-replaceable fans per tray located underneath each PSu and top front exhausting fan tray, alarmed, redundant and field-replaceable


Storage Temperature –40 ˚c to 85 ˚c ambient

relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,

Fcc (Part 15, class a), c-Tick

SummaRy LEd INdICatORSSyStem LeDSThree sets of summary alarm leDs are visible on the front of the VS103 when the door is closed. leD set includes power supply status, board monitors and fan monitors.

BackpLane power LeDSDc Power greenMajor redMinor Yellow

BoarD monitorS LeDSMajor redMinor Yellow

Fan monitorS LeDSMajor redMinor Yellow

aLaRm aNd mONItORINg CONNECtORa 37-way D-Type connector provides direct access to the major and minor alarm lines and serial bus for each card in the chassis.

ORdERINg OPtIONSVS103-ac-iFa 4ru ac Ventura chassis

VS103-Dc-iFa 4ru Dc Ventura chassis

VS113 ac power supply

VS123 Dc power supply

VS111 1ru heat baffle

VS112 1ru heat baffle with fans

FcS183-aeMS advanced element Management SystemFcS183-eMS element management system

ac power SuppLieSVoltage 90–264Vac

Power 200W

Frequency 47–63Hz

efficiency 70% at full loadWeight 1.67 lbs.

LEd INdICatORSPower leDs

ac Power green

Major alarm redMinor alarm Yellow

ORdERINg OPtIONSVS103-ac-iFa 4ru ac Ventura chassisVS113 ac power supply

Dc power SuppLieSVoltage 35-72 VDc

Power 200W

efficiency 70% at full loadWeight 1.70 lbs.

LEd INdICatORSPower Monitors

Dc Power green

Major alarm redMinor alarm Yellow

ORdERINg OPtIONSVS103-Dc-iFa 4ru Dc Ventura chassis

VS123 Dc power supply

chassis and Power Supplies 1.1

VeNTura

vS103 4Ru Chassis and vS113-a/C and vS123-d/C Power Supplies

vS103 / vS113 / vS123

• Robustcarrier-classdesign• 10slotsforanycombinationofcardsfromtheVenturaseries•Dualredundantloadsharingpowersupplies,availableinACorDC,ensure

maximum system up time•Hotswappablecardsandpowersupplies• Fieldserviceablefansensuresystemlongevity• FrontpanelsummaryLEDsofpowersupplystatus,boardmonitorsandfan

monitors •Drop-downdoorforcardaccess• Passivechassisbackplane• 19”rackmountable•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement

System that provides remote status, alarms and configurations via SNMP and ethernet


VeNTura

1.1


EtHERNEtconnector rJ45

link Speed 10Mbps (10baseT)

iP Settings iP address Subnet Mask gateway

Password levels administrator user

Operating Systems Windows 98 Windows 2000 Professional Windows XP Professional linux

Web browsers internet explorer 6.0 Netscape 7.2

SNmPStandard Mib ii

Mib Parameters sysDesc sysObject sysupTime syscontact sysName syslocation sysServices

# of Trap Destinations 5

Trap information Trap number Trap attachment

Trap configuration through Web browser interface

RS232connector Db9 (female)baud rate 9600, 1 stop bit, 8 data bits, no parity

LEd INdICatORSFcS183-aeMS activity

link Dc power

ELEmENt maNagEmENtFeatures SNMP and Web browser interface that provides monitoring and/or configuration of the status, alarms and controls for Ventura series cards installed in a VS103 chassis.

Sample alarms loss of input loss of video eDH errors loss of audio laser failure Optical low light upstream transmitter alarms

Sample Status control settings SFP transmitter wavelength SFP transmitter output power Model and serial number

Sample controls laser transmitter (enable or disable) control set by (netman or onboard switches) receiver input mode (optical or electrical) SDi default signal (ON or OFF) Mux channel (enable or disable) Test pattern generator (enable or disable) line standard (NTSc or Pal)

PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis

Voltage +5V

Power consumption 2W max





ORdERINg OPtIONSFcS183 Focus comprehensive element management

card

element Management 1.1

VeNTura

Web browser with SNmP Element management System

FCS183

•WebbrowserandSNMPuserinterfaces• Automaticcardrecognition•Userdefinablealarms(major,minorornoalarm)• Statusandconfigurationofcardsettings• Provideshistorywithdate/timestampingforeachcard• Twolevelsofuserandpasswordaccessprivileges• Fanandpowersupplyalarmstatus• Inbandelementmanagement• FirmwareremotelydownloadableoverInternet/Intranet• Providesinterfacetothirdpartyelementmanagementsystemsthrough

standard SNMP Mibs • Accessupto32chassisthroughasingleIPaddressorviaoneRS232port•NEBSLevel3compliant

VS183

SLOT

#2

SLOT

#3

SLOT

#4

SLOT

#5

SLOT

#6

SLOT

#7

SLOT

#8

SLOT

#9

SLOT

#10

VS103 Ventura chassis

Network


advanced Element management System

FCS183-aEmS

advanced element Management

VeNTura

1.1

The FcS183-aeMS is a linux-based element management card managing the Ventura series cards. it acts as an SNMP agent for all cards in the shelf, controls and configures them using a Web browser and stores all the data in Flash (buffer) memory. The FcS183-aeMS can be configured to control other cards using a remote and secure Telnet session.

The FcS183-aeMS is unobtrusive in installing or uninstalling and acts automatically as soon as a new card is inserted in one of the slots in the shelf. it uses residual power to save the data and shuts down in a controlled manner.

• Automaticrecognition,controlandoperationoflinecards•WebbrowserandSNMPbasedmonitoringandcontrolling• RemotefirmwaredownloadforFCS183-AEMSandotherlinecardsusing

remote and secure Telnet session•Date/timestampedhistoryanddatarecordinginFlashmemory(buffer)• Chassisenvironmentreportingusingtemperatureandfanspeedsensor(LED

indicators)•On-boardmicroprocessordetails:100MIPS,32-bitRISCbasedSoC,External

128Mb flash and 64Mb SDraM• Safeoperationtransfertoupdatedfirmware(startsusingnewfirmwareafter

validation)• Linux-basedsystem•Userdefinablealarmsbasedonpriority(major,minorornoalarm)

SNMP agent #1

SNMP agent #N

Web server #X

BRAVOnet

AEMS

SNMPagent

Network

SNMP manager #1

SNMP manager #N

Inform

Web manager #X

Web browserWeb browser

Get, Set

Inform

Get, Set

VS183AEMS

POWER

#1

POWER

#2

FAN

SLOT

#2

SLOT

#3

SLOT

#4

SLOT

#5

SLOT

#6

SLOT

#7

SLOT

#8

SLOT

#9

SLOT

#10

VS103 Ventura chassis


FCS183-aEmS aS SNmP agENt a single FcS183-aeMS acts as the proxy agent for up to 9 Ventura line cards, 2 power supplies and the fan assembly placed in the VS103 chassis.

ELEmENt maNagEmENtFeatures SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls for Ventura series cards installed in a VS103 chassis. Some of the features are given below: – SNMPV2c ready – Telnet based remote and secure login – remote firmware downloads

LEd INdICatORSDc Dc power supply status

ecg Device status

liNK ethernet link status

acT ethernet activity status

carD VS-183 aeMS alarm status

SHelF line cards alarm statusPrOg can be user configured

PHySICaL aNd ENvIRONmENtaLFcS183-aeMS – aeMS card resides in a single slot of a VS103 Ventura series chassis.

Voltage 5V or 3.3V chassis supply


Operating Temp 0 °c/32°F to 50 °c/122°F

Storage Temp -40 °c/-40°F to 85 °c/185°F

relative Humidity 5% to 85%compliance NebS level 3, ul, cSa, ce, Fcc (Part 15,

class a), c-TicK, and roHS.

CONNECtOR tyPESethernetTelnet remote linux system configuration

FTP Firmware downloads

HTTP Web browser access

SNMP element management

connector rJ45 10/100 Mbps

No. of connectors Single access dual interface (front and rear access: Two ports are provided for a common access)

Password levels administrator/user

Operating Systems Windows 98, 2000 Pro, XP Pro and linuxWeb browser internet explorer 6.0

Netscape Navigator 7.2 Mozilla Firefox 1.0 (Newer version supported)

rS232 / eia232For linux system configuration

connector Db9 (male)

No. of connectors 2baud rate up to 115200, 1 stop bit, 8 data bits, no

parityGpioTo interface Ventura chassis with user’s equipment

connector Micro-D 9-pinNo. of connectors 1, with 8 user configured,

TTl compatible i/O lines

ORdERINg OPtIONSFcS183-aeMS advanced element Management System

card

gPiO cable FcS183-aeMS general purpose input/output card connector cable

advanced element Management 1.1

VeNTura

advanced Element management System

FCS183-aEmS

RJ-45

IDC-50PC Lines

andAlarms

RS232 (x2)

Backplane

Connectorpanel

EthernetTransformer

PC and AlarmProcessing

Linux basedsingle boardcomputer

32-bit SoC100MIPS

Serial Ports

128Mb Flash

64Mb SDRAM

Power Conversion

DIPSwitch

FrontPanelLEDsand

RJ-45

ProgrammableGeneral Purpose I/O

FCS183-AEMS

GPIO (8 I/Os)


dvB-aSI/SdI monitoring and test System

FCS1000

Monitoring and Test System

VeNTura

1.1

FcS1000 provides a high-density, cost-effective QoS monitoring solution.

each input has a 270Mbps interface, allowing monitoring of either DVb-aSi signals or serial digital video signals. Service management is provided via an embedded Pc-based processor which provides a full Simple Network Management Protocol (SNMP) interface and Web browser display. all alarm conditions can be mapped into SNMP traps as well as individual gPi outputs for local alarms.

• In-servicemonitoringforupto16channelsin1RU•DVB-ASIorSMPTE259SDIcapable•CheckingofallDVBinputstreamstoETR101290•CheckingtoSMPTERP165onSDIinputstreams•High-impedancepassive‘BNCTee’foreachchannel• ComprehensiveSNMPtrapsandinforms• SeparateGPIcontactalarmsforeachchannel• Fullinternaldiagnostics• ASIstreamhandlingfrom16Kbps–216Mbps• 10/100baseTEthernetmanagementport• SerialportcommunicationsforlocaldiagnosticsandISDN/PSTNadapters• Powerfulalarmfilteringandlogging•QoSprofilepresetsandweeklyscheduling• Remoteuploadsofnewschedulesandfirmwareupgrades


OPERatIONbrowser based, multi-channel, menu-driven QoS monitoring system. configurable for SDi or aSi in groups of four. a set-up screen for each group of four allows for detailed monitoring from top level alarms and faults, right down to fine-grain details of SMPTe rP165 or eTr 101290.

up to four different program profiles can be pre-loaded for each channel and a scheduler screen allows for one full week of profile scheduling.

an alarm conditioning/filtering/logging screen provides for alarm persistence and hold time filtering as well as criticality assignment and threshold settings. individual channel SNMP informs are generated and sent based on the settings of this screen.

dvB-aSI mONItORINg SmPtE 259m SdI mONItORINgeTr 101 290 SMPTe rP165

Signal present Signal present

TS sync loss eDH–Missing

TS sync byte errors eDH–Packet error

PaT error active Picture (aP) eDH error here

continuity count error aP error detected already

PMT error aP unknown error status

PiD error Full Field (FF) error detected here

Pcr error / accuracy FF error detected already

caT error FF unknown error status

NiT error ancillary (aNc) error detected here

SDT error aNc error detected already

eiT error aNc unknown error status

rST error Other alarms

TDT error Video black

rS Fec error Freeze framecontinuity count audio (group error, silence, phase and

overload)

POWER aNd ENvIRONmENtaLPower automatic 110~240 V ac, iec connector

Power consumption 0.15a , 240Vac, <35W

cooling Forced via side intake and exhaust vents

Operating Temperature between 0 °c and 50 °cOperating Humidity 10% to 90% (non-condensing)

ELEmENt maNagEmENtFeatures SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls. Some of the features are:- SNMP V2c ready- Telnet based remote and secure login- remote firmware downloads





connector rJ45 10Mbps

No. of connectors Single access (16 channels)



Netscape Navigator 7.2rS232 / eia232For linux system configuration (two connectors, front and rear access)




connector DSub-25 pinNo. of connectors 1, with 16 TTl compatible i/O lines

PHySICaLWidth Front panel: 19” eia standard

(483mm) (exc. rack ears: 440m)

Height 1.7” (43mm), 1ru

Depth 19” (484mm) (including rear connectors)Weight 11lbs. (5kg) (6kg with delivery packing)

ORdERINg OPtIONSFcS1000 Focus Monitoring and Test System

(formerly named TiMS)

Monitoring and Test System 1.1

VeNTura


FCS1000


dIgItaL vIdEOStandards SDi (SMPTe-259M)

SDTi (SMPTe-305M) DVb-aSi (eN50083-9)

# of inputs 4 (VS411-eO)

# of outputs 4 (VS411-Oe)

Monitors 1 (VS411-eO and VS411-Oe)

connector bNc

impedance 75 Ohm

Data rate 270Mbpsequalization up to 300m w/belden 8281

OPtICaL tRaNSmIttER# of outputs 1

connector Sc/Pc

Data rate 1.3gbps

laser type SFP

laser wavelengths 1310nm, 1550nm, cWDM, DWDM

Output power level –1dbm minFiber type Single mode

OPtICaL RECEIvER# of inputs 1

connector Sc/Pc

receiver type aPD pigtail

input wavelengths 1260nm – 1620nm

Sensitivity ≤–32dbm

Max input power –8dbmFiber type Single mode

RS422# of channels 1

connector 3 pin polarized headerData rate up to 1Mbps

LEd INdICatORSVS411-eo VS411-oechannel 1 loss of video channel 1 loss of videochannel 2 loss of video channel 2 loss of videochannel 3 loss of video channel 3 loss of videochannel 4 loss of video channel 4 loss of videolaser failure loss of input

ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

alarms channel 1 loss of video channel 2 loss of video channel 3 loss of video channel 4 loss of video laser transmitter failure (VS411-eO) loss of input (VS411-Oe)

Status Model and serial number Transmitter power level (VS411-eO) SFP laser transmitter wavelength (VS411-eO) SFP receiver installed (VS411-Oe) receiver power level (VS411-Oe) laser power Optical receiver power

controls laser transmitter enable/disable (VS411-eO) Pattern generator enable


Voltage +5V, +12V, -12V


Operating temperature 0 ˚c to 50 ˚c chassis ambient

Storage temperature –40 ˚c to 85 ˚c ambient

relative humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,


ORdERINg OPtIONSVS411-eO-SFP Transmitter w/SFP cage, no optics installed

VS411-Oe aPD receiver installed

SFp optionSSFP-T3-1310-S 1310nm laser

SFP-T3-1550-S 1550nm laser

SFP-T3-1470-c 1470nm cWDM laser








4-Channel SdI/aSI multiplexer/demultiplexer

vS411

Time Division Multiplexing

VeNTura

1.1

•Multichanneldigitaldataonasinglefiber•Designedtotransport270MbpssignalscomplyingwithSMPTE-259M,

305M and DVb-aSi eN-50083-9• RemovestimingandalignmentjitterfromtheSDIsignalsatthedemux

output• Lossofvideo,lossofopticalinput,laserfailureLEDs• Automaticcableequalizationupto300mforBelden8281• Selectabletestpatterngeneratorforeachchannel• Enable/disablecontrolforeachchannel• EDHQoSmonitoringoneachchannelforSDI• AuxiliaryRS422channel• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550andany

iTu cWDM or DWDM wavelengths•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElement

Management System that provides remote status, alarms and configurations via SNMP and ethernet

VS411-EO

SDI (SMPTE-259M)SDTI (SMPTE-305M)

DVB-ASI (EN50083-9)

1310/1550/CWDM1.302Gbps

1310/1550/CWDM

CH1

CH2

CH3

CH4

RS422

Front panel monitor

VS411-OE

SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)

APD Rcv’r

APD Rcv’r

CH1

CH2

CH3

CH4

RS422

Front panel monitor

270MbpsNetwork


dIgItaL vIdEOStandards 1.3025gbps

OPtICaL tRaNSmIttER# of Outputs 1

connector Sc/Pc

Data rate 1.3025gbps

laser Type SFP

laser Wavelengths 1310nm, 1550nm, cWDM, DWDM

Output Power level –1dbm minFiber Type Single mode


connector Sc/Pc

receiver Type aPD SFP

input Wavelengths 1260nm–1620nm


Max input Power –8dbmFiber Type Single mode

LEd INdICatORSlaser failure loss of input

ELEmENt maNagEmENtcompatible with the FcS183 and FcS183-aeMS that feature SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

alarms laser transmitter failure loss of input

Status Model and serial number SFP laser installed laser enable laser wavelength (nm) laser power (dbm) SFP receiver installed Optical receiver power (dbm)

controls laser transmitter enable/disable


Power consumption +3.3V, +5V, 5W max





ORdERINg OPtIONSVS411-OO Optical regenerator with SFP-r3-aPD receiver

installedSFp optionSSFP-T3-1310-S 1310nm laser

SFP-T3-1550-S 1550nm cWDM laser









Time Division Multiplexing 1.1

VeNTura

4-Channel SdI/aSI Optical Regenerator

vS411-OO

•Opticalregenerationofmultichanneldigitaldataonasinglefiber•Designedtoregenerateopticalsignalofdatarate1.3025Gbpsfromany

VS411-eO• RemovestimingandalignmentjitterfromtheSDIsignalsatthedemux

output• Lossofopticalinput,laserfailureLEDs• SmallForm-factorPluggable(SFP)opticsavailablein1310,1550orany

iTu cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement


VS411-EO


DVB-ASI (EN50083-9)

1310/1550/CWDM

1.3Gbps 1.3Gbps

CH1

CH2

CH3

CH4

RS422

VS411-OE


APDRcv’r

CH1

CH2

CH3

CH4

RS422

270Mbps 270Mbps

VS411-OO

1310/1550/CWDM

1.3Gbps 1.3Gbps

APDRcv’r


4-Channel SdI/aSI Fiber multiplexer/demultiplexer with Protection

vS411-EO-SFP-SFP* / vS411-OE-SFP-SFP*

•Multichanneldigitalvideoonasinglefiber•Optionalsecondopticaloutputfornetworkpathdiversity(multiplexer)

and optional second optical receiver for automatic switchover and network resilience (demultiplexer)

•Designedtotransport270MbpssignalscomplyingwithSMPTE-259M,305M and DVb-aSi eN-50083-9

• RemovestimingandalignmentjitterfromtheSDIsignalsatthedemultiplexer output

• LEDstoindicatelossofvideo,lossofopticalinputandlaserfailure• Automaticcableequalizationupto300mforBelden8281• SelectabletestpatterngeneratorforeachchannelwithEDH• Enable/disablecontrolforeachchannel• EDHQoSmonitoringoneachchannelforSDIatmultiplexerinputand

demultiplexer output• AuxiliaryRS422channel• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550andany

iTu cWDM or DWDM wavelengths•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement



VeNTura

1.1

*Scheduled availability Q2 2008

VS411-EO


DVB-ASI (EN50083-9)

1310/1550/CWDM1.302Gbps

1310/1550/CWDM

CH1

CH2

CH3

CH4

RS422

Front panel monitor

VS411-OE


APD Rcv’r

APD Rcv’r

CH1

CH2

CH3

CH4

RS422

Front panel monitor

270MbpsNetwork





# of outputs 4 (VS411-Oe)

Monitors 1 (VS411-eO and VS411-Oe)

connector bNc

impedance 75 ohms


OPtICaL tRaNSmIttER# of outputs 2 SFPs

connector Sc/Pc

Data rate 1.3gbps

laser type SFP



OPtICaL RECEIvER# of inputs 2 SFPs

connector Sc/Pc

receiver type aPD SFP

input wavelengths 1260nm – 1620nm


Max input power ≥–8dbmFiber type Single mode


connector 3 pin polarized headerData rate up to 1Mbps

LEd INdICatORSVS411-eO-SFP-SFP VS411-Oe-SFP-SFP

channels 1-4 channels 1-4

LeD LiGhtSgreen SignalYellow loss of signalFlash green Test pattern onlyFlash green Test pattern onlylaser failure loss of input






relative humidity 5% to 85%compliance NebS level 3, ul, cSa, ce,



alarms On each video channel of eO and Oe loss of video eDH On network interface laser transmitter failure on eO loss of inputs on Oe

Status On each video channel of eO and Oe channel On or Off Format SDi or aSi SDi rate 525/60 or 625/50 Pattern generator enabled or disabled Pattern generator 525 or 625 line On network interface laser present on eO Wavelength on eO receiver present on Oe Optical power on Oe general Model and serial number Firmware revision

controls On each video channel of eO and Oe enable or disable channel Force SDi or aSi enable or disable test pattern On network interface enable or disable laser on eO

ORdERINg OPtIONSVS411-eO-SFP-SFP Transmitter w/SFP dual cage, no optics

installed

VS411-Oe-SFP-SFP receiver with dual SFP cages and one SFP installed


SFP-T3-1550-S 1550nm laser









SFP-r3-1aPD aPD SFP receiver

vS411-EO-SFP-SFP* / vS411-OE-SFP-SFP*


VeNTura

*Scheduled availability Q2 2008


dIgItaL vIdEOStandards SDi (SMPTe-259M), SDTi (SMPTe-305M),

DVb-aSi (eN50083-9)


# of Outputs 8 (VS811-Oe)

connector bNc

impedance 75 ohm



connector Sc/Pc

Data rate 3.125 gbps

laser Type SFP


Output Power level 0dbm minFiber Type Single mode


connector Sc/Pc



Sensitivity ≤-30dbm



connector 3 pin polarized headerData rate up to 500 Kbps

LEd INdICatORSVS811-eo VS811-oechannel 1 loss of video channel 1 loss of video channel 2 loss of video channel 2 loss of video channel 3 loss of video channel 3 loss of video channel 4 loss of video channel 4 loss of video channel 5 loss of video channel 5 loss of video channel 6 loss of video channel 6 loss of video channel 7 loss of video channel 7 loss of video channel 8 loss of video channel 8 loss of video SFP Primary laser failure loss of primary input SFP Second. laser failure loss of secondary input Dc power Dc power

EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarm signals.


alarms loss of video laser transmitter failure (VS811-eO) loss of input (VS811-Oe)

Status channels enabled/disabled (VS811-eO) Selected test pattern Test pattern generator enabled/disabled Model and serial number SFP transmitter installed Transmitter wavelength laser power SFP receiver installed Optical receiver power

controls Test pattern generator enable/disable input channel enable/disable (VS811-eO) laser transmitter enable/disable (VS811-eO)


Voltage +3.3V, +5V






ORdERINg OPtIONSVS811-eO-SFP Multiplexer card w/dual SFP cages,

no optics installed

VS811-Oe-SFP Demultiplexer card w/dual SFP cages, no optics installed

SFP-T3-1310-S 1310nm SFP laser module


SFP-T3-1470-c 1470nm cWDM SFP laser module








SFP-r3-aPD SFP aPD receiver

8-Channel SdI/aSI multiplexer/demultiplexer

vS811


VeNTura

1.1

•Multichanneldigitaldataonasinglefiber•Optionalsecondopticaloutputfornetworkpathdiversity(Mux)and

optional second optical receiver for automatic switchover and network resilience (Demux)

•Designedtotransport270MbpssignalscomplyingwithSMPTE-259M,305M, and DVb-aSi eN-50083-9

• RemovestimingandalignmentjitterfromtheSDIsignalsattheDemuxoutput

• Selectabletestpatterngeneratorforeachchannel:Colorbars,PLLpathological, equalizer pathological and black field

• Enable/disablecontrolforMuxinputchannels• Automaticcableequalizationupto300mforBelden8281• AuxiliaryRS422channel• SmallFormfactorPluggable(SFP)opticsavailable

in 1310, 1550 or any iTu cWDM or DWDM wavelength

•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvanced

element Management System that provides remote status, alarms and configurations via SNMP and ethernet

VS811-EO


DVB-ASI (EN50083-9)

1310/1550/CWDM

1310/1550/CWDMCH5

CH6

CH7

CH8

RS422

270Mbps

CH1

CH2

CH3

CH4

VS811-OE


CH5

CH6

CH7

CH8

RS422

270Mbps

CH1

CH2

CH3

CH4APD Rcv’r

APD Rcv’r270MbpsNetwork

3.125Gbps 3.125Gbps


dIgItaL vIdEOStandards 3.125gbps


connector Sc/Pc

Data rate 3.125gbps

laser Type SFP


Output Power level –1dbm minFiber Type Single mode


connector Sc/Pc





LEd INdICatORSlaser failureloss of input

EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarms signals.

ELEmENt maNagEmENtcompatible with the FcS183 eMS and FcS183-aeMS which feature SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

alarms laser transmitter failure loss of input

Status Model and serial number SFP laser installed laser enable laser wavelength (nm) laser power (dbm) SFP receiver installed Optical receiver power (dbm)



Power consumption +3.3V, +5V, 5W max



relative Humidity 5% to 85%

compliance NebS level 3, ul, cSa, ce, Fcc (Part 15, class a), c-Tick

ORdERINg OPtIONSVS811-OO-SFP Optical regenerator with SFP-r3-aPD receiver

installed


SFP-T3-1550-S 1550nm cWDM laser










VeNTura

8-Channel SdI/aSI Optical Regenerator

vS811-OO

•Opticalregenerationofmutichanneldigitaldataonasinglefiber•Designedtoregenerateopticalsignalofdatarate3.125Gbpsfromany

VS811-eO• RemovestimingandalignmentjitterfromtheSDIsignalsatthedemux

output• SmallForm-factorPluggable(SFP)opticsavailablein1310,1550orany

iTu cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement


VS811-EO


DVB-ASI (EN50083-9)

1310/1550/CWDMCH5

CH6

CH7

CH8

RS422

270Mbps

CH1

CH2

CH3

CH4

VS811-OE


CH5

CH6

CH7

CH8

RS422

270Mbps

CH1

CH2

CH3

CH4

APD Rcv’r

3.125Gbps 3.125Gbps

1310/1550/CWDM

1310/1550/CWDM

3.125Gbps

APDRcv’r

3.125Gbps

1310/1550/CWDM

APDRcv’r

VS811-OO


muXinput SiGnaLSinput signal type 270Mbps DVb-aSi - eN50083-9 or aSi2,

containing data from 800kbps up to 43.8Mbps

Maximum Payload DS3 43.8Mbps e3 33.9Mbps

Number of inputs 4

input/output levels 800mV(pk-pk)

input impedance (aSi) 75 ohm

cable equalizer (max) 200m of belden 8281 cable

output SiGnaLSOutput signal type 45Mbps – DS3 (b3ZS)

34Mbps – e3 (HDb3)

Framing DS3 c-bit parity e3 g.751

impedance/connector 75 ohm / bNcNumber of outputs 2 identical buffered outputs

dEmuXinput SiGnaLSinput signal type 45Mbps – DS3 (b3ZS) c-bit parity

34Mbps – e3 (HDb3) g.751

impedance/connector 75 ohm / bNc

Number of inputs 2 with automatic switching for protection and 1 loop through for receiver chaining

output SiGnaLSOutput signal type 270Mbps DVb-aSi - eN50083-9

Number of outputs 4 x 270Mbps

DS3 / e3

impedance/connector 75 ohm / bNc

POWER CONSumPtION/ENvIRONmENtVPg9345TX/rX <20W (all options)

Operating temperature 0 °c to +50 °c

Storage temperature –10 °c to +70 °c

Humidity 20% – 80% rH, non-condensing

NEtWORk maNagEmENt/aLaRmSmuX controLSinput rate setting ch 1 to 4: input bit rate ceiling, set to a

resolution of 0.1Mbps

rS Fec ch 1 to 4: add / don’t add

DVb checking ch 1 to 4: check for PiD, PaT, PMT, SeS or eS errors

DVb error threshold Sets thresholds for alarms

Output mode Selects network interface type

channel iD codes ch 1 to 4: Sets each TS’s conditional access codes (2)

muX aLarmS (Set aS either; none, major or minor)card fail card fault

input loss ch 1 to 4: No input

input rate violation ch 1 to 4: allowable input bit rate exceeded

configuration error Wrong input type selected

DVb error channel 1 to 4: rS, PiD, PaT, PMT, SeS or eS errors

DemuX controLSStandby protection switch enable or disable automatic network standby

switching

Switch persistence error persistence to enable protection switch to operate

input mode Selects network interface type

ber threshold Sets ber alarm threshold

Non-consec. error Network error threshold

channel iD codes ch 1 to 4: Sets each TS’s conditional access codes (2)

DemuX aLarmS (Set aS either; none, minor or major)card fail card fault

input loss loss of frame alignment

configuration error ch 1 to 4: error in data type or conditional access code

input errors ch 1 to 4: rate exceeds programmed thresholds

Standby input selected Standby network input is being used by DeMuX

DVb error channel 1 to 4: rS, SeS errors

ORdERINg OPtIONScontact factory for ordering information.

dS3/E3 dvB-aSI tS multiplexer Bandwidth Optimizer

vS9345


VeNTura

1.1

•MultiplexesfourDVB-ASIinputsintooneDS3(45Mbps)orE3(34Mbps)output

•MaximizesASIpayloadcapacity(upto43.8Mbpsovera45Mbpsnetwork)• Inputscanbeswitchedtoanyoutput• Individualchannelbandwidthceilingprovidestotalcontrolovercapacity

available to client (to a resolution of 0.1Mbps per TS) •DVBvaliditycheck(PID,PAT,PMT,ESandSES)• Reed-SolomonFECcanbeappliedtoeachASITSforreliableMPEG-2

transmission• EachinputTSisassignedconditionalaccesscodes(2layers)forsecure

content delivery•CompatiblewiththeFCS183AdvancedNetworkManagementSystemthat

provides remote status, alarms and configurations via SNMP and ethernet




# of inputs (VS811-SM-48) 8 x 270Mbps

# of Outputs (VS811-SD-48) 8 x 270Mbps

connector bNc

impedance 75 Ohm

Data rate 270Mbps ± 100ppmequalization 300m w/belden 8281

OPtICaL tRaNSmIttER# of Outputs 1 primary with optional secondary (SFP)

connector Sc/Pc

Data rate 2.488gbps (Oc-48/STM-16)

laser Type SFP



OPtICaL RECEIvER# of inputs 1 primary with optional secondary (SFP)

connector Sc/Pc


input Wavelengths 1260nm – 1620nm

Sensitivity ≤-30dbm at ber of 10e-10

Max input Power –8dbm at ber of 10e-10Fiber Type Single mode


connector 3 pin polarized headerData rate up to 500 Kbps

LEd INdICatORSVS811-SM-48 VS811-SD-48

channels 1-8 channels 1-8

LeD LiGhtSgreen SignalYellow loss of signal Flash green Test pattern only

SFP Primary laser failure loss of primary input

SFP Secondary laser failure loss of secondary inputDc Power Dc power

FRamINgOc-48 STS-48c, aNSi, T1.105STM-16 STM-16;ITU-RecG.707



alarms loss of video and section, line, path laser transmitter failure (VS811-SM-48) loss of input (VS811-SD-48)

Status channels enabled/disabled (VS811-SM-48) Selected test pattern Test pattern generator enabled/disabled Model and serial number

controls Optical standard (SONeT/SDH) Test pattern generator enable/disable input channel enable/disable (VS811-SM-48) laser transmitter enable/disable (VS811-SM-48)


Voltage +3.3V, +5V






ORdERINg OPtIONSVS811-SM-48 8X270Mbps multiplexer to SONeT/SDH

Oc-48/STM-16, 2.485gbps

VS811-SD-48 8x270Mbps demultiplexer to SONeT/SDH Oc-48/STM-16



SFP-T3-XX-D where XX = iTu DWDM grid number

SFP-r3-aPD SFP aPD receiver

SONeT/SDH 1.1

VeNTura

SdI/aSI SONEt/SdH multiplexer/demultiplexer

vS811-S

•MultichanneldigitalvideooverOC-48corSTM-16networktributary•OptionalsecondopticaloutputatMuxandoptionalsecondoptical

receiver at Demux for path diversity with automatic switch over•ManagesSONET/SDHpointeradjustments• Removestimingandalignmentjitterfromthe270Mbpssignalsatthe

Demux output• Formatindependent270MbpsinputscancarrySDI,SDTIandDVB-ASI• Enable/disablecontrolforMuxinputchannels• Selectabletestpatterngeneratorforeachchannel:colorbars,PLL

pathological, equalizer pathological and black field• Automaticcableequalizationproviding300mat270Mbps• AuxiliaryRS422channelforinbandmanagement• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550andany

iTu cWDM or DWDM wavelengths•NEBSLevel3compliant•Configurableto1HDand2SDs; scheduled availability in 2008

VS811-SM-48


DVB-ASI (EN50083-9)

1310/1550/DWDM

1310/1550/DWDM

STM-16

OC-48c

CH5

CH6

CH7

CH8

RS422

CH1

CH2

CH3

CH4

VS811-SD-48

SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)CH5

CH6

CH7

CH8

RS422

CH1

CH2

CH3

CH4APD Rcv’r

APD Rcv’rSONET/SDHNetwork


vS402 CWdmStandards iTu-T g.694.2

# of i/O channels 2

common Output 1

connector Sc/Pc

Optical Wavelengths (nm) 1310, 1550

channel Separation 20nm

insertion loss 1db max

link loss w/mux/demux combo ≤2.0db

return loss ≥50db

input Power 300mW max

Polarization Dependent loss ≤0.1dbFiber Type Single mode


# of i/O channels 4

common Output 1

connector Sc/Pc

Optical Wavelengths (nm) 1510, 1530, 1550, 1570



link loss w/Mux/Demux combo ≤2.0db

return loss ≥50db




# of i/O channels 8

common Output 1

connector Sc/Pc

Optical Wavelengths (nm) 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610


insertion loss 1.5db max

link loss w/mux/demux combo ≤2.5db

return loss ≥50db


Polarization Dependent loss ≤0.1db

Fiber Type Single mode

LEd INdICatORSVS402/VS404/VS408 Dc power


Status Model and serial number


Voltage +5V

Power consumption <1W





ORdERINg OPtIONSVS402-cWDM 2-channel cWDM optical multiplexer/

demultiplexer

VS404-cWDM 4-channel cWDM optical multiplexer/demultiplexer

VS408-cWDM 8-channel cWDM optical multiplexer/demultiplexer

2-Channel, 4-Channel and 8-Channel Optical CWdm

vS402/404/408

Wavelength Division Multiplexing

VeNTura

1.1

• Bidirectionalchannels• Environmentallystable• 20nmchannelspacing• Lowreturnloss• Verylowinsertionloss• ITUG.694.2standardscompliant•Highchannelisolation•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement




# of i/O channels 9

common Output 1

connector Sc/Pc

Optical Wavelengths (nm) 1310, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610


insertion loss 1.8db max

link loss w/mux/demux combo <3.0db

return loss ≥50db



LEd INdICatORSVS409 Dc power

ELEmENt maNagEmENt

compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.


PHySICaL aNd ENvIRONmENtaL

resides in a single slot of a VS101 or VS103 Ventura series chassis

Voltage +5V






ORdERINg OPtIONSVS409-cWDM 9-channel cWDM optical multiplexer/

demultiplexer

Wavelength Division Multiplexing 1.1

VeNTura

9-Channel Optical CWdm

vS409

• 8CWDMwavelengthsplus1310nmlegacy• Bidirectionalchannels• Environmentallystable• 20nmchannelspacing• Lowreturnloss• Verylowinsertionloss• ITUG.694.2standardscompliant•Highchannelisolation•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement



OPtICaL# of inputs 1

# of Outputs 2

connector Sc/Pc

input Wavelength range 1260nm–1620nm

insertion loss 3.6db max on each output

return loss ≥–55db

Output Power 50/50 split

Thermal Stability ±0.1dbFiber Type Single mode

LEd INdICatORSVS401SP Dc power

ELEmENt maNagEmENt




Voltage +5V






ORdERINg OPtIONSVS401SP 2-channel optical splitter

2-Channel Optical Splitter

vS401SP

Wavelength Division Multiplexing

VeNTura

1.1

•Halfpowersplit—50/50• Environmentallystable• Lowinsertionloss,typicallylessthan3.6dBincludingsplit,connectorand

internal losses•WidewavelengthrangecoveringallCWDMwavelengths•Directivitybetterthan50dB• Lowpolarizationdependentloss•NEBSLevel3compliant


OPtICaL# of input channels 2 (primary and secondary)

# of Outputs 1

connector Sc/Pc


Switch channel crosstalk >55db

Switching Time <10ms

Switch Triggered at –35dbm

Switch Stimulation automatic (at -35dbm) Manual (Front panel push button) element management (forced)

Switch Mode Settings revertive Non-revertive

Wavelength range 1260nm–1620nmFiber Type Single mode

LEd INdICatORSVS401SW Primary input present

Secondary input present Primary input selected Secondary input selected

ELEmENt maNagEmENt


alarms loss of primary input loss of secondary input

Status Primary input (present/not present) Secondary input (present/not present) Selected input (primary/secondary) Selected mode (revertive/non-revertive) Model and serial number

controls input select (primary/secondary) Mode select (revertive/non-revertive)


Voltage +5V






ORdERINg OPtIONSVS401SW 2-channel optical switch

Wavelength Division Multiplexing 1.1

VeNTura

2-Channel Optical Switch

vS401SW

• 2X1opticalpathprotection•Directionallightoneachinput• Eachpathisfullybi-directional• AcceptsallCWDMwavelengths• Revertiveandnon-revertiveswitchingmodes• Fast10msswitchingtime• Frontpanelandremotenetmanmanualswitch• Lowloss<2dB•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement





# of inputs 1

# of Outputs 2

connector bNc

impedance 75 ohm


dIgItaL audIOStandards aeS/ebu (SMPTe-272M)

# of inputs 2 (VS312-e)

# of Outputs 2 (VS312-D)

connector bNc (unbalanced) 3-pin terminal (balanced)

impedance 75 ohm (unbalanced) 110 ohm (balanced)

Sampling rates 48 KHz, 44.1 KHz and 32 KHz

Output rate 48 KHz

resolution 20-bit

Format Synchronous or asynchronousOutput level 1 Vp-p (unbalanced)

2 Vp-p min (balanced)

aNaLOg audIOStandards exceeds rS250c short haul specs

# of inputs 4 (l1,r1,l2,r2) (1 group) (VS312-e)

# of Outputs 4 (1 group) (VS312-D)

connector 3-pin terminal

impedance Hi-Z or 600 ohm (balanced)

Sampling rate 48 KHz

Quantization 20-bit

SNr unweighted -90dbFS

Frequency response 0.5db (20Hz to 20KHz)

THD <0.05% (20Hz to 20KHz, @ 0dbFS)

iMD <0.05% SMPTe @ +2dbu

crosstalk between ch. 95dbinput/Output level 0dbFS = +24dbu (Hi-Z)

0dbFS = +18dbu (600 ohm)

LEd INdICatORSVS312-e VS312-Derror detection handling error detection handling loss of input loss of input loss of video loss of video SDi input present SDi input present aSi input present aSi input present loss of audio 1 loss of aeS 1–2 loss of audio 2 loss of analog 1–4 loss of audio 1 loss of audio 2

ELEmENt maNagEmENt


alarms loss of input loss of video eDH errors loss of audio VS312-e uplink transmitter alarms (VS312-D)

Status aSi input detected SDi input detected incoming embedded audio detected Model and serial number

controls Force to aSi mode enable/disabled Select pre-embedded or local embedding mode (VS312-e) SDi generator remove or retain audio from SDi output (VS312-D) iD setting for the VS312 (0-65535)


Voltage +3.3V, +5V, +12V, -12V






ORdERINg OPtIONSVS312-e SDi audio embeddder

VS312-D SDi audio de-embedder

SdI/aSI audio Embedder/de-Embedder

vS312

converters and embedders

VeNTura

1.1

• SDI,SDTIandDVB-ASIcompatiblewithautomaticinput signal detection

• RemovestimingandalignmentjitterfromtheSDIsignal• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest• EmbedsuptofourchannelsofanalogaudioortwochannelsofAESdigital

audio, or mix of both• Asynchronousorsynchronous48Khzaudiowith20-bitaudioresolution• Availablein600ohmorHi-Z•DefaultSDIkeep-alivesignal• Lossofvideo,EDH,SDIvideopresent,lossofinput,lossofaudioLEDs• Inbandelementmanagement• Automaticcableequalizationupto300mforBelden8281•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement


VS312-E

AnalogAudio

DigitalAudio

CH1 (L1)


DVB-ASI (EN50083-9)

CH2 (R1)

CH3 (L2)

CH4 (R2)

AES1

AES2

270Mbps 270Mbps

270Mbps

VS312-D

AnalogAudio

DigitalAudio

CH1 (L1)


CH2 (R1)

CH3 (L2)

CH4 (R2)

AES1

AES2

270MbpsNetwork




# of inputs 1

# of Outputs 2

connector bNc

impedance 75 ohm






Note: see VS312 data sheet for more detailed specifications


# of inputs 4(VS501-eO)





connector Sc/Pc

laser Type SFP


Output Power level -0.5dbm minFiber Type Single mode


connector Sc/Pc

receiver Type PiNFeT pigtail



Max input Power 0dbmFiber Type Single mode

LEd INdICatORSVS501-eO VS501-OeNote: same as the VS312

ELEmENt maNagEmENt

compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Note: same as the VS312 plus the following:

alarms laser transmitter failure (VS501-eO) Optical low light (VS501-Oe) VS501-eO uplink transmitter alarms (VS501-Oe)

Status VS501-eO uplink transmitter status (VS501-Oe) Model and serial number laser wavelength laser power SFP receiver installed Optical receiver installed

controls laser transmitter enable/disable (VS501-eO) electrical/optical receiver input mode (VS501-Oe) SDi pattern enable iD setting for the VS501 (0-65535)


Voltage +3.3V, +5V, +12V, -12V

Power consumption 7W typical





ORdERINg OPtIONSVS501-eO Transmitter card

VS501-Oe PiNFeT receiver

SFp optionSSFP-TV-1310-SF SFP-TV-1470-c SFP-TV-1490-c SFP-TV-1510-c SFP-TV-1530-c SFP-TV-1550-c SFP-TV-1550-SD SFP-TV-1590-c SFP-TV-1610-c SFP-rV-PiN

converters and embedders 1.1

VeNTura

SdI/aSI 270mbps audio Embedder/de-Embedder and Fiber Optic transport

vS501

• SDI,SDTIandDVB-ASIcompatible• RemovestimingandalignmentjitterfromtheSDIsignal• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest• EmbedsuptofourchannelsofanalogaudioortwochannelsofAESdigital

audio, or mix of both• Asynchronousorsynchronous48Khzaudiowith20-bitaudioresolution•DefaultSDIkeep-alivesignal• AESaudiopresent,analogaudiopresent,SDIvideopresent,ASIvideo

present, laser fail, Dc power, eDH, loss of input and loss of audio leDs• Inbandelementmanagement• Automaticcableequalizationupto300mforBelden8281• Smallformfactorpluggable(SFP)opticsavailablein1310,1550oranyITU

cWDM or DWDM wavelength•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement

System that provides remote status, alarms and configurations via SNMP and ethernet VS501-EO

AnalogAudio

DigitalAudio

CH1 (L1)


DVB-ASI (EN50083-9)

CH2 (R1)

CH3 (L2)

CH4 (R2)

AES1

AES2

270Mbps 270Mbps

PIN Rcv’r

270Mbps

270Mbps

1310/1550/CWDMVS501-OE

AnalogAudio

DigitalAudio

CH1 (L1)


CH2 (R1)

CH3 (L2)

CH4 (R2)

AES1

AES2

270Mbps

270MbpsNetwork


Composite analog video and audio to SdtI 270mbps w/Fiber Optic transport

vS551


VeNTura

1.1

•ConvertsNTSC/PALanalogvideotoSDTIfortransportovera270Mbpsnetwork

• Embedsuptofourchannelsofanalogaudio• 12-bitvideoquantization,20-bitaudioquantization•Unintrusiveaudiomonitoringandleveladjustment•Compositetestpatterngenerator• Lossofinput,lossofvideo,EDH,lossofaudioLEDs•Optical(optional)andelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU



VS551-ADC

AnalogAudio

Analog Video(NTSC/PAL)

CH1 (L1)

CH2 (R1)

CH3 (L2)

CH4 (R2)

270Mbps

SDTI(SMPTE-305M)

1310/1550/CWDM

VS551-DAC

AnalogAudio


CH1 (L1)

CH2 (R1)

CH3 (L2)

CH4 (R2)

270Mbps

SDTI(SMPTE-305M)

270MbpsNetwork

| network-electronics.com

aNaLOg vIdEOStandards exceeds rS250c short haul spec

Formats NTSc (525 lines), Pal (625 lines)

# of inputs 1 (VS551-aDc)

# of Outputs 1 (VS551-Dac)

Monitors 1 front panel

connector bNc

impedance 75 ohm

Quantization 12-bit

equalization up to 300m w/belden 8281

SNr >70db

Differential gain <2% (NTSc), <1% (Pal)Differential Phase <0.7° (NTSc), <0.5° (Pal)

dIgItaL vIdEOStandards SDTi (SMPTe-305M)

# of inputs 1 (VS551-Dac)

# of Outputs 1 (VS551-aDc)

connector bNc

impedance 75 ohm

Data rate up to 270Mbpsequalization up to 300m w/belden 8281







Quantization 20-bit







OPtICaL tRaNSmIttER (OPtIONaL)# of Outputs 1

connector Sc/Pc

laser Type SFP


Output Power level -0.5dbm min (1310 and 1550) -0.5dbm min (cWDM)


OPtICaL RECEIvER (OPtIONaL)# of inputs 1

connector Sc/Pc





LEd INdICatORSVS551-aDc VS551-Dacloss of audio for each ch. loss of audio for each channel

loss of video (ViD) loss of video (ViD)

eDH eDH

Dc power loss of input (lOi)

loss of frame (lOF)

Dc power

ELEmENt maNagEmENt


alarms loss of audio 1-4 loss of video

Status SFP present SFP transmitter wavelength SFP power level



Voltage +3.3V, +5V, +12V, -12V






ORdERINg OPtIONSVS551-aDc-SFP analog to digital converter w/audio

embedder (SFP cage included)

SFp SoLD SeparateLy

SFP-TV-1310-SF SFP-TV-1470-c SFP-TV-1490-c SFP-TV-1510-c SFP-TV-1530-c SFP-TV-1550-c SFP-TV-1550-SD SFP-TV-1590-c

SFP-TV-1610-c

VS551-Dac-SFP Digital to analog converter w/audio de-embedder (SFP cage included)

SFp SoLD SeparateLySFP-rV-PiN




# of inputs 1


connector bNc

impedance 75 ohm

Quantization 12-bit


SNr >70db

Differential gain <2% (NTSc), <1% (Pal)Differential phase <0.7° (NTSc), <0.5° (Pal)

dIgItaL vIdEOStandards SDTi (SMPTe-305M), SDi (SMPTe-259M),

HD-SDi (SMPTe-292M), DVb-aSi (eN50083-9), aTSc (SMPTe-310M)

# of inputs 1

# of outputs 2 electrical, 1 optical


connector bNc

impedance 75 ohm

Data rate 19.4Mbps, 270Mbps, 1.4835gbps, 1.485gbps

equalization up to 150m at 1.5gbps with belden 1694a up to 300m at 270Mbps with belden 8281

Jitter exceeds SMPTe standardreturn loss exceeds SMPTe standard


# of inputs 4




Quantization 20-bit

SNr unweighted -90 dbFS

Frequency response 0.5 db (20Hz to 20KHz)

THD <0.05% (20Hz to 20KHz, @ 0 dbFS)

iMD <0.05% SMPTe @ +2 dbu

crosstalk between channels 95 dbinput/output level 0 dbFS = +24dbu (Hi-Z)

0 dbFS = +18dbu (600 ohms)

dIgItaL audIOStandards aeS unbalanced (SMPTe-276M)

aeS balanced (aeS3-1992) Dolby e

# of inputs 2 rear balanced or unbalanced

connector Phoenix 3-pin balanced, 110 ohm bNc 75 ohm

Signal level unbalanced 1.2 Vp-p balanced 1 to 7 Vp-p

resolution Supports up to 24 bitsSample rates 32kHz, 44kHz, 48kHz sample rates converted

to 48kHz


connector Sc/Pc

laser type SFP


Output power level -0.5dbm min (1310 & 1550) -0.5dbm min (cWDM)

Fiber type Single mode

LEd INdICatORSVideo mode HD/SD/aSi

loss of input

crc/eDH for HD/SD

audio mode analog/aeSloss of audio analog 1, 2, 3, 4

aeS 1, 2

ELEmENt maNagEmENtcompatible with the FcS183 comprehensive element management system that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura Series chassis

Voltage +3.3V, +5V, +12V, -12V


Operating temperature 0 ˚c to 50˚c chassis ambientStorage temperature –40 ˚c to 85 ˚c ambient

ORdERINg OPtIONSVS551-D-aDc-SFP analog to digital converter with audio

embedder (SFP cage included, SFP sold separately)

For optical interface options, see Ventura SFP index data sheet.

transmitter – universal analog & digital video/audio adapter for Fiber Optic transport

vS551-d-adC-SFP

• Automaticallydetectsvideoinputformat•ConvertsNTSC/PAL/PAL-MVideoandATSC,SD-SDI,HD-SDIandDVB-ASI

inputs to SDTi/SDi and optical output for transport over 270Mbps network•Handles525/625SD-SDIand1.4835/1.485GbpsHD-SDI•Compositetestpatterngenerator•ConvertsuptofourchannelsofanalogaudiotoAES•DolbyE–compatible•Non-intrusiveaudiomonitoringandleveladjustment• EmbedsAESconvertedfromanalogaudioordirect-fedAESintoSDTI,

SD-SDi or HD-SDi•WarningLEDsforlossofvideo,lossofaudio,CRC/EDH• SmallForm-factorPluggable(SFP)opticsavailablein1310,1550,andany

iTu cWDM or DWDM wavelength• EngineeredtomeetNEBSLevel3requirements•CompatiblewithFCS183AEMSandEMSelementmanagers


VeNTura




# of outputs 2


connector bNc

impedance 75 ohm

Quantization 12-bit


SNr >70db



SDi (SMPTe-259M) HD-SDi (SMPTe-292M) DVb-aSi (eN50083-9) aTSc (SMPTe-310M)

# of inputs 1 optical (see optical spec), 1 electrical

# of outputs 2


connector bNc

impedance 75 ohm





# of outputs 4



Sampling rate 48KHz

Quantization 20-bit



THD <0.05% (20Hz to 20KHz, at 0dbFS)

iMD <0.05% SMPTe at +2 dbu

crosstalk between channels 95dbinput/output level 0dbFS = +24dbu (Hi-Z)

0dbFS = +18dbu (600 ohms)




connector Phoenix 3-pin balanced, 110 ohm bNc 75 ohm, unbalanced

Signal level unbalanced 1.2Vp-p balanced 1 to 7Vp-p

resolution Supports up to 24 bits


connector Sc/Pc

receiver type SFP - aPD

input wavelengths 1260nm - 1620nm


Max input power –8dbm (+7dbm with 15db attenuator)Fiber type Single mode

LEd INdICatORSVideo Mode HD/SD/aSi

loss of input (local and remote)

crc/eDH for HD/SD


aeS 1, 2 (local and remote)

ELEmENt maNagEmENtcompatible with the FcS183 comprehensive element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.


Voltage +3.3V, +5V, +12V, -12V


Operating Temperature 0 ˚c to 50 ˚c chassis ambientStorage Temperature –40 ˚c to 85 ˚c ambient

ORdERINg OPtIONSVS551-D-Dac-SFP universal analog and digital video and audio

fiber receiver

Receiver – universal analog and digital video and audio adapter for Fiber Optic transport

vS551-d-daC-SFP


VeNTura

1.1

• ReceivesallSD-SDI,HD-SDI,ASIandATSCopticallyandelectrically•De-embedsfourchannelsofaudiofromSD-SDIandHD-SDIandprovides

aeS and analog outputs •DolbyE–compatible•ConvertsSDTItoNTSC/PAL/PAL-M•Non-intrusiveanalogaudiomonitoringandleveladjustment• Lossofinput,lossofvideo,EDH/CRC,lossofaudioLEDs• RemotelossofvideoandlossofaudioLEDs• SmallFormfactorPluggable(SFP)opticswithAPDreceiverforoptimum

sensitivity• EngineeredtomeetNEBSLevel3requirements•CompatiblewiththeFCS183comprehensiveelementmanagementsystem

that provides remote status, alarms and configurations via SNMP and ethernet



Formats NTSc (525 lines) Pal (625 lines)


# of Outputs 1 (VS601-aDc) 2 (VS601-Dac)

connector bNc

impedance 75 ohm

Quantization 12-bit


SNr >70db

Differential gain <2% (NTSc) <1% (Pal)

Differential Phase <0.7° (NTSc) <0.5° (Pal)




connector bNc

impedance 75 ohm


LEd INdICatORSVS601-aDc VS601-Dacloss of video loss of video

loss of input

ELEmENt maNagEmENt


alarms loss of video loss of input (VS601-Dac)

Status 75 ohm termination ON/OFF (VS601-aDc) Model and serial number








ORdERINg OPtIONSVS601-aDc composite analog video to SDTi converter

VS601-Dac SDTi to composite analog video converter


VeNTura

Composite analog video to SdtI 270mbps Converter

vS601


• ExceedsRS250Cshorthaulspecifications• 12-bitquantization• Analogloopthruand75ohmterminationswitch• FrontpanelmonitorportwithEQandgainadjustment•DefaultSDTIkeep-alivesignal• LossofinputandlossofvideoLEDs• Automaticcableequalizationupto300mforBelden8281•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement


VS601-ADC VS601-DACAnalog Video(NTSC/PAL)


270Mbps

SDTI(SMPTE-305M)

270MbpsNetwork

270Mbps

SDTI(SMPTE-305M)


gENERaLinput signal types NTSc, wideband 12 MHz analog passband

No. of channels/chassis 10

Wideband mode spec. NaSa: 79K33043 Specification of Wideband Fiber Optic Terminal equipment

Video mode specifications rS-250c Short Haul (video mode)Framing SMPTe 305M / SMPTe 259M

vS621-adC INPut INtERFaCEinput levels 1 Vpp*, nominal ± 3db (adjustable)

input impedance 75 ohm* unbalanced (loop-through) or 124 ohm balanced (user-selectable)

return loss >40db, 0–5 MHz >30db, 0–10 MHz

common mode rejection >70db at 60Hz

cable equalizer max 130m, up to 12MHz (belden 8281)

equalization frequency

response error ± 0.1db perdb of cable loss*configured for 3Vpp/50 ohm as VS-3V-PcO5000TX

vS621-daC OutPut INtERFaCEOutput levels 1 Vpp*, nominal ± 3db (adjustable)

output impeDancerear panel Dual 75 ohm* unbalanced or 124 ohm

balanced (user-selectable)Front panel 75 ohm unbalanced, flat, pre-equalized

monitor port

return loss >40db, 0–5 MHz

Module-to-Module isolation >60db, 0–5 MHz

cable equalizer max. ith 130m, up to 12MHzequalization frequencyresponse error ± 0.1db perdb of cable loss*configured for 3Vpp/50 ohm as VS-3V-PcO5000rX

OPtICaL INtERFaCE PaRamEtERS# of Outputs 1 (VS621-aDc)


connector Sc/Pc

laser Type SFP

laser Wavelength 1310nm, 1550nm, cWDM, DWDM (please contact us for DWDM optics)

Output Power level–aDc -0.5dbm min

Sensitivity–Dac -34dbmFiber Type Single mode

SyStEm FREquENCy RESPONSEVideo Mode ± 0.15db, 10Hz–5MHzanalog/Digital Mode ± 0.35db, 10Hz–8MHz

± 0/-3db, 8MHz–12MHz

SdI ELECtRICaL INtERFaCE PaRamEtERSPhysical interface SMPTe 259M

Format SMPTe 305M

coax Drive up to 300m (belden 8281)cable eQ up to 300m (belden 8281)

gENERaL vIdEO PERFORmaNCE SPECIFICatIONSgain inequality ± 1 ire

Delay inequality ± 10ns

intermodulation <1% for 50% aPl

chroma non-linear gain distortion <0.5% for 50% aPl

chroma non-linear phase distortion <0.5° for 50% aPl

luminance non-linearity <2%

Differential gain <1%

Differential Phase <0.5°

Transient non-linearity <1%

Dynamic gain of Picture Signal <1%

Signal to low Frequency Noise pp >53db

luminance Signal-to-weighted rMS Noise >68db

Signal-to-Periodic Noise >67dbSignal-to-impulse Noise >65db

aNaLOg/data SIgNaL dIStORtIONSTotal harmonic distortion >40db below 1 Vpp sinewave

Signal-to-noise ratio >50db at -27dbm receiver optical power, 1 Vpp signal to 12MHz band-limited noise

Peak-to-peak jitter <5% up to 4Mbps, tested with 1 Vpp NrZ signal and 215 -1 pseudo-random bit sequence

Overshoot <10%bit error rate <1 x 10-9, 1kbps to 4Mbps

PHySICaL aNd ENvIRONmENtaLTemperature range 0-50 °c ambientPower requirements <7W

ORdERINg OPtIONSVS621-PcO5000TX analog to digital

VS621-PcO5000rX Digital to analog

VS621-3V-PcO5000TX analog to digital (3Vpp/50 ohm)

VS621-3V-PcO5000rX Digital to analog (3Vpp/50 ohm)

analog to SdtI video/data Converter

vS621


VeNTura

1.1

• EmulatesthefunctionsofthePCO5000fiberlink• Accommodatesbothvideoanddatainputs•Convertscompositevideosignalorwideband12MHzanalogbandwidth

into a SMPTe 305M SDTi stream•Morethan30dBopticallinkbudget;lownoise,highlinearityconversion• LEDindicatorsandexternalalarmcontactsforvideo,dataandoptics• Balancedandunbalancedinputsandoutputs• Frontpanelbufferedmonitoroutputs• Frontpanellevel(orgain)andcableequalizationadjustments• 3Vpp/50ohmversionavailable•NEBSLevel3compliant• SFPopticssupportingallstandardandCWDMapplications



Formats NTSc (525 lines) Pal (625 lines)

# of inputs 1 (VS651-aDc) 1 reference video (VS651-aDc)


connector bNc

impedance 75 ohm

Quantization 10-bit or 8-bit


SNr >70db

Differential gain <2% (NTSc) <1% (Pal)

Differential Phase <0.7° (NTSc) <0.5° (Pal)




connector bNc

impedance 75 ohm


LEd INdICatORSVS651-aDc VS651-Dac625/525 lines NTSc video 10bit/8bit Pal video Sync (analog timing reference) loss of input

lock (composite Y input present) Dc power +5V configuration complete

ELEmENt maNagEmENt


alarms loss of input (VS651-Dac) Dc power alarm (VS651-Dac)

Status Selected mode NTSc/Pal/auTO (VS651-Dac) 270Mbps Pal detected/not detected (VS651-Dac) 270Mbps NTSc detected/not detected (VS651-Dac) Model and serial number (VS651-Dac)


Voltage +3.3V, +5V, +12V, -12V


Operating Temperature 0˚ to 50 ˚c chassis ambient




ORdERINg OPtIONSVS651-aDc composite analog video to component SDi

digital converter

VS651-Dac component SDi digital to composite analog video converter


VeNTura

Composite analog video to Component SdI 270mbps Converter

vS651

•ConvertsanalogcompositevideotodigitalcomponentSDI• 10-bitprocessingforoptimumlinearityandSNR•ComprehensiveVBIhandling• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest•MeetsTV-1servicespecifications• ExceedsRS250Cshorthaulspecifications• Proprietaryselectablecomb/bandsplitfilteringfortopqualitydynamic

performance• Automaticcableequalizationupto300mforBelden8281•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement


270MbpsSDI

(SMPTE-259M)

SDI

(SMPTE-295M)

VS651-ADC VS651-DACAnalog Video(NTSC/PAL)


Reference


SDI(SMPTE-259M)

270Mbps270MbpsNetwork





# of outputs 2 (VS661-Dac)

Monitors 1 (VS661-aDc)

connector bNc

impedance 75 Ohm

Quantization 10-bit


SNr >70db




# of outputs 2 (VS661-aDc)

connector bNc

impedance 75 Ohm






impedance Hi-Z or 600 Ohm (balanced)


Quantization 20-bit

SNr unweighted –90 dbFS


THD <0.05% (20Hz to 20KHz, @ 0 dbFS)



0 dbFS = +18dbu (600 Ohm)

OPtICaL CHaRaCtERIStICS# of Outputs 1 (VS661-aDc)


connector Sc/Pc

laser type SFP

laser wavelength 1310nm, 1550 nm, cWDM, DWDM (please contact us for DWDM optics)

Output power level – aDc -0.5 dbm min

Sensitivity - Dac -34dbm


LEd INdICatORS

VS661 – aDcMinor alarm (MiN) leD (red) loss of composite video input, loss

of SDi video output, or loss of audio

Major alarm (MaJ) leD (red) board failure or communication failure

input present (ViD) leD (green) composite video input present

Power OK (Dc) leD (green) power supply ok

audio channel 1 (auD1) leD (yellow) ON with alarm, normally OFF




VS661 – Dacinput present (SDi) leD (red) SDi video present

audio group (auD) leD (yellow) audio group present

Power (+5V) leD (green) +5V Dc power present

alarm (alM) leD (yellow) flashes with alarm, normally OFF

Set-up and alignment 10 character alphanumeric display

ELEmENt maNagEmENtcompatible with FcS183-aeMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.


Voltage +3.3V, +5V, +12V, -12V




relative humidity 5% to 85%


ORdERINg OPtIONSVS661-aDc composite analog audio and video to

component SDi digital converter

VS661-Dac component SDi digital to composite analog audio and video converter. SFP optics sold separately

Composite analog audio and video to Component SdI 270mbps Converter w/Fiber Optic transport

vS661


VeNTura

1.1

• Embedsuptofourchannelsofanalogaudio• 20-bitaudioquantization• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest•MeetsUStelcoTV-1servicespecifications(GR-338-CORE)• ExceedsRS250Cshorthaulspecifications• Proprietaryselectablecomb/bandsplitfilteringfortopqualitydynamic

performance• Automaticcableequalizationupto300mforBelden8281• Frontpanelmonitorandcalibrationadjustments•User-definablealarmsbasedonpriority• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550andany



VS661-ADC

AnalogAudio


CH1 (L1)

CH2 (R1)

CH3 (L2)

CH4 (R2)

SDI270MbpsNetwork

VS661-DAC

AnalogAudio


CH1 (L1)

CH2 (R1)

CH3 (L2)

CH4 (R2)

SDI


OPERatIONThe VS905-Me-cO-Fe MPeg-2 encoder product is designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSc and analog audio are widely used. The VS905-Me-cO-Fe can be configured at any desired quality level with full MP at Ml support. ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. also, by providing aSi and ethernet network interfaces the service provider can use the equipment directly in most applications.

COmPRESSIONViDeoFormat MPeg-2 (iSO/iec 13 818-2)

Profile MP at Ml

gOP i, b, b, P

bit rate From 1Mbps to 10Mbps

Delay <140ms

auDioFormat MPeg-1 layer ii (iSO/iec 11172-3)

bit rate From 64 to 384Kbps

ENCOdER INPutS – vIdEO anaLoGSystem specifications NTSc (iTu r-bT 470.rS250-c)

Number of inputs 1

impedance 75 Ohm

Nominal level 1Vpp

bandwidth >5MHz

S/N lum Wt. >62db

cable eq >100m

otherVertical blanking interval (Vbi) transport is fully supported by stripping the Vbi lines at the transmit end, multiplexing them uncompressed for transport and re-inserting at the receive end into the reconstituted video signal.

an SDi pattern generator is also built into the encoder and can be switched into the processing chain ahead of the compression engine, thereby providing end-to-end quality testing of the entire compression, transport and decompression process.

LEd INdICatORSloss of audio 1 loss of audio 2 loss of video loss of ethernet activity Power supply

ELEmENt maNagEmENt

alarms loss of video loss of audio 1 loss of audio 2

controls/Status audio/video encoder parameters Transmission protocol/network settings Test pattern generator Vbi configuration

ENCOdER INPutS – audIO anaLoGNumber of inputs up to 2 independent channels

connector type Phoenix 3-pin

impedance 600 Ohm or Hi-Z

S/N (TX to rX) > 80db rms, > 62db

otheran on-board tone generator is also present that can be enabled for link and audio processing verification.

NEtWORk INtERFaCES ENCOdER FormatSaSi eN 50083-9

10/100baseT uDP/rTP, unicast and Multicast

maNagEmENt aNd CONtROLphySicaL anD enVironmentaLPower consumption <12 Watts per unit

Operating temp 0 ˚c to 50 ˚c ambient

Storage temp –40 ˚c to 85 ˚c c


aGency compLiance Safety NebS level 3, ul, cSa, ce

eMc Fcc Part 15 class a, ce eMc directive

ORdERINg INFORmatIONVS905-Me-cO-Fe – eNc encoder

mPEg 2 Encoder NtSC + audio to aSI/100Baset Network Interfaces

vS905-mE-CO-FE*

•NTSCcompositeinputandoutput• TwoindependentchannelsofanalogaudioorfourAES/EBU**• BufferedfrontpanelmonitorforNTSCinput• VideoandaudiogainandcableEQadjustments• Supports2channelsoflocallyembeddedaudio• 10/100Base-Tnetworkinterface• Videoandaudiotestpatterngeneratorsforbuilt-inautomatedtestingof

equipment and link• FullVBIsupport• 4:2:0supportwithtransportstreamsofupto10Mbps• I,B,B,PGOPfor4:2:0profile.SimpleGOPstructureconfiguration

through element management gui**• ACandDCpoweroptionswithoptionalredundancy•CompatiblewithSMPTE2022,FECincluded•CompatiblewithFCS183-AEMSAdvancedElementManagementSystem

* Scheduled availability Q3 2008** Planned versions for future release


VeNTura

VS905-ME-CO-FE*MPEG Encoder/Network Interface

22

**

**



VeNTura

1.1

mPEg 2 EncoderNtSC/PaL/SdI + audio to aSI/dS3/100Baset Network Interfaces

tv-C PLuS-ENC

•NTSC/PALcompositeorSDIinputsandoutputs• EightindependentchannelsofanalogaudioorfourAES/EBU• VideoandaudiogainandcableEQadjustatallanalogI/Os• Supportspre-embeddedorlocallyembeddedaudio•DVB-ASI,DS3and10/100Base-Tinterfaces• Videoandaudiotestpatterngeneratorsforbuilt-inautomatedtestingof

equipment and link• FullVBIsupport• 4:2:2PatMLwithtransportstreamofupto50Mbps• 4:2:0supportwithtransportstreamsofupto25Mbps• SimpleGOPstructureconfigurationthroughelementmanagementGUI• Intuitivefrontpanel,easy-to-navigateLCDmenuwithpushbutton

controls• ACandDCpoweroptionswithoptionalredundancy



VeNTura

OPERatIONThe TV-c PluS MPeg-2 encoder and decoder products are designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSc/Pal and analog audio and SDi and aeS are all widely used, often by the same customer who is interconnecting digital and analog islands. The TV-c PluS can be configured to seamlessly bridge these worlds at any desired quality level with full MP at Ml and 4:2:2 P at Ml support. ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. also, by providing aSi, ethernet and DS3 network interfaces the service provider can directly use the equipment in most applications.

COmPRESSION/dE-COmPRESSIONViDeoFormat MPeg-2 (iSO/iec 13 818-2)

Profile 422P at Ml or MP at Ml

gOP adjustable

bit rate From 1,5Mbps to 50Mbps

Delay <140ms


Mode Stereo, Joint Stereo, Mono, Dual Monobit rate From 64 to 384Kbps

ENCOdER INPutS – vIdEO anaLoGSystem specifications Pal/NTSc (iTu r-bT 470.rS250-c)

Number of inputs 1

impedance 75 ohm

Nominal level 1Vpp

bandwidth >5MHz

S/N lum Wt. >68db (Profile dependent)

cable eq >100m

DiGitaL Format SDi 4:2:2 (625/625) (iTu-r 656)

cable eq >250m belden 8281


an SDi pattern generator is also built into the encoder and can be switched in to the processing chain ahead of the compression engine thereby providing end-to-end quality testing of the entire compression, transport and decompression process.



impedance 600 ohm or Hi-Z


DiGitaL System specification aeS-3

connector type Three, Phoenix

impedance 110 ohm, balanced

Sample frequency 32, 44.1, 48Khz

otheraudio may also be carried pre-embedded in the SDi stream. if configured to do so, this audio will be de-embedded and processed by the encoder. an on-board tone generator is also present that can be enabled for link and audio processing verification.

NEtWORk INtERFaCES ENCOdER/dECOdERFormatSaSi eN 50083-9

e3 g.751

DS-3 g.751, c-bit Parity or M-Frame*


maNagEmENt aNd CONtROLboth encoder and decoder can be configured via front panel push buttons and lcD display. The main status, control and alarm interfaces are through an rS-232 port and an rJ-45 10 baseT port on the rear panel of each unit.

PHySICaL aNd ENvIRONmENtaLThe TV-c PluS is fitted with both ac plus Dc power supplies. redundancy is enhanced through unique cross coupling of Dc inputs and outputs when two or more units are present.

Power consumption <25 Watts per unit


Storage temp –40 ˚c to +85 ˚c


aGency compLiance Safety ul, cSa, ce low Voltage DirectiveeMc Fcc Part 15 class a, ce eMc Directive

ORdERINg INFORmatIONVPg TV-c PluS – eNc encoder

tv-C PLuS-ENC



VeNTura

1.1

mPEg 2 decoder NtSC/PaL/SdI + audio to aSI/dS3/100Baset Network Interfaces

tv-C PLuS-dEC

•NTSC/PALCompositeorSDIinputsandoutputs• EightindependentchannelsofAnalogaudioorfourAES/EBU• VideoandaudiogainandcableeqadjustatallanalogI/O’s• Pre-embeddedorlocallyembeddedaudiosupported•DVB-ASI,DS3and10/100Base-Tinterfaces• Videoandaudiotestpatterngeneratorsforbuilt-inautomatedtestingof

equipment and link • FullVBIsupport• 4:2:2PatMLwithtransportstreamofupto50Mbps• 4:2:0supportwithtransportstreamsofupto25Mbps• Simple,GOPstructureconfigurationthroughelementmanagementGUI• IntuitivefrontpaneleasytonavigateLCDmenuwithpushbuttoncontrols• Simplefront-paneldisplay/menu/selection• ACandDCpoweroptionswithoptionalredundancy



VeNTura




gOP adjustable

bit rate From 1.5Mbps to 50Mbps

Delay <140ms



dECOdER OutPutS-vIdEO anaLoG System specifications Pal/NTSc (iTu r-bT 470.rS250-c)

Number of inputs 1

impedance 75 ohm

Nominal level 1Vpp

bandwidth >5MHz


cable eq >100m


dECOdE OutPutS – audIO anaLoGNumber of outputs up to 8 independent channels

connector type Phoenix 3-piin

impedance 600 ohm or lo-Z







e3 g.751

DS-3 g.751, c-bit Parity or M-Frame*10/100baseT uDP/rTP, unicast and Multicast





Storage temp –40 ˚c to + 85 ˚c



ORdERINg INFORmatIONVPg TV-c PluS – Dec Decoder

tv-C PLuS-dEC



SDTi (SMPTe-305M) 19.392Mbps (SMPTe-310M) DVb-aSi (eN50083-9)



connector bNc

impedance 75 ohm



connector Sc/Pc

laser Type SFP




connector Sc/Pc





LEd INdICatORSVS201-eo VS201-oelaser failure loss of video loss of video loss of input Mute (laser disabled) bypass Dc power Dc power


ELEmENt maNagEmENt


alarms loss of input loss of video (VS201-Oe) laser transmitter failure (VS201-eO)

Status Transmitter enabled/disabled (VS201-eO) SFP transmitter wavelength (VS201-eO) SFP transmitter output power (VS201-eO) SFP receiver input power (VS201-eO) Data rate (VS201-Oe) bypass enabled/disabled (VS201-Oe) Model and serial number

controls laser transmitter enable/disable (VS201-eO)


Voltage +3.3V, +5V






ORdERINg OPtIONSVS201-eO Transmitter card-SDi/aSi e/O

VS201-Oe receiver card-SDi/aSi O/e with SFP-rV-PiN receiver card installed

SFp optionSSFP-TV-1310-SF Video 270/1500Mbps, TX, Non-cWDM FP

SFP-TV-1550-SD Video 270/1500Mbps, TX, Non-cWDM DFb

SFP-TV-1470-c Video 270/1500Mbps, TX, cWDM




SFP-TV-1550-c Video 270/1500Mbps, TX,cWDM




SdI/aSI/310m Fiber Optic transport

vS201

Single channel Fiber

VeNTura

1.1

• SDI,SDTI,ATSCandASIcompatible• Automaticdatarateselection• PassesSMPTE-259M270MbpsSDIpathologicaltestsequence• Lossofvideo,lossofinput,laserfailureandDCpowerLEDs• Automaticcableequalizationupto300mforBelden8281•Opticalandelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU






# of inputs 1

# of Outputs 2

connector bNc

impedance 75 ohm



connector Sc/Pc

laser Type SFP




connector Sc/Pc





LEd INdICatORSVS231-eo VS231-oelaser failure loss of video loss of video loss of input eDH errors detected eDH errors detected SDi video present SDi video present


Voltage +3.3V, +5V, +12V, -12V






ELEmENt maNagEmENt


alarms loss of input loss of video Video errors laser transmitter failure (VS231-eO) Optical low light (VS231-Oe) VS231-eO uplink transmitter alarms (VS231-Oe)

Status DVb-aSi detected SDi detected Default SDi output enabled/disabled incoming embedded audio detected VS231-eO uplink transmitter status (VS231-Oe) SFP wavelength SFP output power SFP receiver input power Model and serial number

controls iD setting for the VS231 (0-65535) Force to aSi mode enable/disable Default pattern laser transmitter enable/disable (VS231-eO) Optical/electrical receiver input mode (VS231-Oe)




Single channel Fiber 1.1

VeNTura

SdI/aSI 270mbps Fiber Optic transport with Jitter management

vS231

• SDI,SDTIandDVB-ASIcompatiblewithautomaticinput signal detection

• RemovestimingandalignmentjitterfromtheSDIsignal• Toleratesmultiplecascadesthroughafacility• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest•DefaultSDIkeep-alivesignal• Lossofvideo,EDH,SDIvideopresent,lossofinputLEDs• Inbandelementmanagement• Automaticcableequalizationupto300mforBelden8281• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU






# of inputs 1

# of Outputs 2

connector bNc

impedance 75 ohm



connector Sc/Pc

laser Type SFP




connector Sc/Pc





LEd INdICatORSlaser failure loss of video loss of input eDH errors detected SDi video present

ELEmENt maNagEmENt


alarms loss of input loss of video Video errors laser transmitter failure Optical low light uplink transmitter alarms

Status DVb-aSi detected SDi detected Default SDi output enabled/disabled SFP transmitter wavelength SFP transmitter output power SFP receiver input power incoming embedded audio detected uplink transmitter status Model and serial number

controls Force to aSi mode enable/disable laser transmitter enable/disable Optical/electrical receiver input mode


Voltage +3.3V, +5V, +12V, -12V






ORdERINg OPtIONSVS231-OO Optical regenerator

SdI/aSI 270mbps Fiber Optic Regenerator with Jitter management

vS231-OO


VeNTura

1.1

• SDI,SDTIandDVB-ASIcompatiblewithautomaticinputsignaldetection• RemovestimingandalignmentjitterfromtheSDIsignal• Toleratesmultiplecascadesthroughafacility• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest•DefaultSDIkeep-alivesignal• Lossofvideo,EDH,SDIvideopresent,lossofinputLEDs• Inbandelementmanagement• Automaticcableequalizationupto300mforBelden8281• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU






# of inputs 1

# of Outputs 2

connector bNc

impedance 75 ohm








# of inputs 4(VS501-eO)





connector Sc/Pc

laser Type SFP




connector Sc/Pc





LEd INdICatORSVS501-eO VS501-OeNote: same as the VS312

ELEmENt maNagEmENt

compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Note: same as the VS312 plus the following:

alarms laser transmitter failure (VS501-eO) Optical low light (VS501-Oe) VS501-eO uplink transmitter alarms (VS501-Oe)

Status VS501-eO uplink transmitter status (VS501-Oe) Model and serial number laser wavelength laser power SFP receiver installed Optical receiver installed

controls laser transmitter enable/disable (VS501-eO) electrical/optical receiver input mode (VS501-Oe) SDi pattern enable iD setting for the VS501 (0-65535)


Voltage +3.3V, +5V, +12V, -12V










VeNTura

SdI/aSI 270mbps audio Embedder/de-Embedder and Fiber Optic transport

vS501

• SDI,SDTIandDVB-ASIcompatible• RemovestimingandalignmentjitterfromtheSDIsignal• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest• EmbedsuptofourchannelsofanalogaudioortwochannelsofAESdigital

audio, or mix of both• Asynchronousorsynchronous48Khzaudiowith20-bitaudioresolution•DefaultSDIkeep-alivesignal• AESaudiopresent,analogaudiopresent,SDIvideopresent,ASIvideo

present, laser fail, Dc power, eDH, loss of input and loss of audio leDs• Inbandelementmanagement• Automaticcableequalizationupto300mforBelden8281• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU


System that provides remote status, alarms and configurations via SNMP and ethernet VS501-EO

AnalogAudio

DigitalAudio

CH1 (L1)


DVB-ASI (EN50083-9)

CH2 (R1)

CH3 (L2)

CH4 (R2)

AES1

AES2

270Mbps 270Mbps

PIN Rcv’r

270Mbps

270Mbps

1310/1550/CWDMVS501-OE

AnalogAudio

DigitalAudio

CH1 (L1)


CH2 (R1)

CH3 (L2)

CH4 (R2)

AES1

AES2

270Mbps

270MbpsNetwork


Composite analog video and audio to SdtI 270mbps w/Fiber Optic transport

vS551


VeNTura

1.1


• Embedsuptofourchannelsofanalogaudio• 12-bitvideoquantization,20-bitaudioquantization•Unintrusiveaudiomonitoringandleveladjustment•Compositetestpatterngenerator• Lossofinput,lossofvideo,EDH,lossofaudioLEDs•Optical(optional)andelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU



VS551-ADC

AnalogAudio


CH1 (L1)

CH2 (R1)

CH3 (L2)

CH4 (R2)

270Mbps

SDTI(SMPTE-305M)

1310/1550/CWDM

VS551-DAC

AnalogAudio


CH1 (L1)

CH2 (R1)

CH3 (L2)

CH4 (R2)

270Mbps

SDTI(SMPTE-305M)

270MbpsNetwork






connector bNc

impedance 75 ohm

Quantization 12-bit


SNr >70db

Differential gain <2% (NTSc), <1% (Pal)Differential Phase <0.7° (NTSc), <0.5° (Pal)




connector bNc

impedance 75 ohm








Quantization 20-bit







OPtICaL tRaNSmIttER (OPtIONaL)# of Outputs 1

connector Sc/Pc

laser Type SFP


Output Power level -0.5dbm min (1310 and 1550) -0.5dbm min (cWDM)


OPtICaL RECEIvER (OPtIONaL)# of inputs 1

connector Sc/Pc





LEd INdICatORSVS551-aDc VS551-Dacloss of audio for each ch. loss of audio for each channel

loss of video (ViD) loss of video (ViD)

eDH eDH

Dc power loss of input (lOi)

loss of frame (lOF)

Dc power

ELEmENt maNagEmENt

compatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.alarms loss of audio 1-4

loss of video Status SFP present SFP transmitter wavelength SFP power level controls laser transmitter enable/disable


Voltage +3.3V, +5V, +12V, -12V






ORdERINg OPtIONSVS551-aDc-SFP analog to digital converter w/audio

embedder (SFP cage included)

SFp SoLD SeparateLy

SFP-TV-1310-SF SFP-TV-1470-c SFP-TV-1490-c SFP-TV-1510-c SFP-TV-1530-c SFP-TV-1550-c SFP-TV-1550-SD SFP-TV-1590-c

SFP-TV-1610-c

VS551-Dac-SFP Digital to analog converter w/audio de-embedder (SFP cage included)

SFp SoLD SeparateLySFP-rV-PiN



VeNTura



# of inputs 1


connector bNc

impedance 75 ohm

Quantization 12-bit


SNr >70db




# of inputs 1



connector bNc

impedance 75 ohm





# of inputs 4




Quantization 20-bit



THD <0.05% (20Hz to 20KHz, @ 0 dbFS)










to 48kHz


connector Sc/Pc

laser type SFP




LEd INdICatORSVideo mode HD/SD/aSi loss of input crc/eDH for HD/SD audio mode analog/aeSloss of audio analog 1, 2, 3, 4

aeS 1, 2



Voltage +3.3V, +5V, +12V, -12V







vS551-d-adC-SFP







VeNTura

1.1



# of outputs 2


connector bNc

impedance 75 ohm

Quantization 12-bit


SNr >70db





# of outputs 2


connector bNc

impedance 75 ohm





# of outputs 4



Sampling rate 48KHz

Quantization 20-bit














connector Sc/Pc





LEd INdICatORSVideo Mode HD/SD/aSi

loss of input (local and remote)

crc/eDH for HD/SD



ELEmENt maNagEmENtcompatible with the FcS183 comprehensive element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.


Voltage +3.3V, +5V, +12V, -12V




fiber receiver


vS551-d-daC-SFP






VS591 Transposer Block Diagram

dIgItaL vIdEOStandards iTu recommendations

g.703 for e4 physical interface g.751 for e4 framing g.823 for jitter performance

electrical inputs 1 per channel

electrical outputs 2 (e4, reclocked and ac coupled) per channel

Monitors 1 front panel bNc

connectors bNcs on rear connector panel

impedance 75 Ohm

Data rate 139.264Mbps (278.528 M band)equalization better than 250m at 140Mbps for belden

8281

OPtICaL tRaNSmIttER# of outputs 1 per channel

connector Sc/Pc

Data rate 139.264Mbps

laser type SFP



OPtICaL RECEIvER# of inputs 1 per channel

connector Sc/Pc

receiver type PiN


Sensitivity ≤–32dbmFiber type Single mode

LEd INdICatORSDc powerloss of inputValid e4 presentchannel presentlaser failure crc errors/aiS detected


alarms loss of optical input loss of video e4 errors detected

Status Model and serial number Transmitter power level SFP laser transmitter wavelength SFP receiver installed receiver power level

controls laser transmitter enable/disable Pattern generator enable (PrbS with crc check)


Power consumption 7W





ORdERINg OPtIONSVS591-SFP-SFP Dual e4 transposer and protection switch

SFp optionSSFP-TrV-1310-S 1310nm laser with PiN receiver

SFP-TrV-1550-S 1550nm laser with PiN receiver

SFP-TrV-1470-c 1470nm cWDM laser with PiN receiver








SFP-rV-PiN PiN receiver

dual E4 transposer

vS591-SFP-SFP

•Configurablesystemforregenerating,transposingandtransportingE4signals

•DesignedtotransportE4139.264MbpsCMIencodedsignals•MeetsITU-TrecommendationsforE4• Twoindependentchannelspercard• RemovestimingandalignmentjitterfromtheSDIsignalsattheoutput• JittermaskusesITU-TrecommendationsG.823• Lossofvideo,lossofopticalinput,laserfailureLEDs• Automaticcableequalizationbetterthan250mforBelden8281• Selectabletestpatterngeneratorforeachchannel• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550andany

iTu cWDM or DWDM wavelengths•CompatiblewiththeFCS183-AEMSAdvancedElementManagement



VeNTura


gENERaLinput signal types NTSc, wideband 12 MHz analog passband

No. of channels/chassis 10

Wideband mode spec. NaSa: 79K33043 Specification of Wideband Fiber Optic Terminal equipment

Video mode specifications rS-250c Short Haul (video mode)Framing SMPTe 305M / SMPTe 259M

vS621-adC INPut INtERFaCEinput levels 1 Vpp*, nominal ± 3db (adjustable)

input impedance 75 ohm* unbalanced (loop-through) or 124 ohm balanced (user-selectable)

return loss >40db, 0–5 MHz >30db, 0–10 MHz

common mode rejection >70db at 60Hz

cable equalizer max 130m, up to 12MHz (belden 8281)

equalization frequency

response error ± 0.1db perdb of cable loss*configured for 3Vpp/50 ohm as VS-3V-PcO5000TX

vS621-daC OutPut INtERFaCEOutput levels 1 Vpp*, nominal ± 3db (adjustable)

output impeDancerear panel Dual 75 ohm* unbalanced or 124 ohm

balanced (user-selectable)Front panel 75 ohm unbalanced, flat, pre-equalized

monitor port

return loss >40db, 0–5 MHz

Module-to-Module isolation >60db, 0–5 MHz

cable equalizer max. ith 130m, up to 12MHzequalization frequencyresponse error ± 0.1db perdb of cable loss*configured for 3Vpp/50 ohm as VS-3V-PcO5000rX

OPtICaL INtERFaCE PaRamEtERS# of Outputs 1 (VS621-aDc)


connector Sc/Pc

laser Type SFP

laser Wavelength 1310nm, 1550nm, cWDM, DWDM (please contact us for DWDM optics)

Output Power level–aDc -0.5dbm min

Sensitivity–Dac -34dbmFiber Type Single mode

SyStEm FREquENCy RESPONSEVideo Mode ± 0.15db, 10Hz–5MHzanalog/Digital Mode ± 0.35db, 10Hz–8MHz

± 0/-3db, 8MHz–12MHz

SdI ELECtRICaL INtERFaCE PaRamEtERSPhysical interface SMPTe 259M

Format SMPTe 305M

coax Drive up to 300m (belden 8281)cable eQ up to 300m (belden 8281)

gENERaL vIdEO PERFORmaNCE SPECIFICatIONSgain inequality ± 1 ire

Delay inequality ± 10ns

intermodulation <1% for 50% aPl

chroma non-linear gain distortion <0.5% for 50% aPl

chroma non-linear phase distortion <0.5° for 50% aPl

luminance non-linearity <2%

Differential gain <1%

Differential Phase <0.5°

Transient non-linearity <1%

Dynamic gain of Picture Signal <1%

Signal to low Frequency Noise pp >53db

luminance Signal-to-weighted rMS Noise >68db

Signal-to-Periodic Noise >67dbSignal-to-impulse Noise >65db

aNaLOg/data SIgNaL dIStORtIONSTotal harmonic distortion >40db below 1 Vpp sinewave

Signal-to-noise ratio >50db at -27dbm receiver optical power, 1 Vpp signal to 12MHz band-limited noise

Peak-to-peak jitter <5% up to 4Mbps, tested with 1 Vpp NrZ signal and 215 -1 pseudo-random bit sequence

Overshoot <10%bit error rate <1 x 10-9, 1kbps to 4Mbps

PHySICaL aNd ENvIRONmENtaLTemperature range 0-50 °c ambientPower requirements <7W

ORdERINg OPtIONSVS621-PcO5000TX analog to digital

VS621-PcO5000rX Digital to analog

VS621-3V-PcO5000TX analog to digital (3Vpp/50 ohm)

VS621-3V-PcO5000rX Digital to analog (3Vpp/50 ohm)

analog to SdtI video/data Converter

vS621


VeNTura

1.1

• EmulatesthefunctionsofthePCO5000fiberlink• Accommodatesbothvideoanddatainputs•Convertscompositevideosignalorwideband12MHzanalogbandwidth

into a SMPTe 305M SDTi stream•Morethan30dBopticallinkbudget;lownoise,highlinearityconversion• LEDindicatorsandexternalalarmcontactsforvideo,dataandoptics• Balancedandunbalancedinputsandoutputs• Frontpanelbufferedmonitoroutputs• Frontpanellevel(orgain)andcableequalizationadjustments• 3Vpp/50ohmversionavailable•NEBSLevel3compliant• SFPopticssupportingallstandardandCWDMapplications



VeNTura

Composite analog audio and video to Component SdI 270mbps Converter w/Fiber Optic transport

vS661





Monitors 1 (VS661-aDc)

connector bNc

impedance 75 Ohm

Quantization 10-bit


SNr >70db




# of outputs 2 (VS661-aDc)

connector bNc

impedance 75 Ohm






impedance Hi-Z or 600 Ohm (balanced)


Quantization 20-bit

SNr unweighted –90 dbFS


THD <0.05% (20Hz to 20KHz, @ 0 dbFS)



0 dbFS = +18dbu (600 Ohm)

OPtICaL CHaRaCtERIStICS# of Outputs 1 (VS661-aDc)


connector Sc/Pc

laser type SFP

laser wavelength 1310nm, 1550 nm, cWDM, DWDM (please contact us for DWDM optics)

Output power level – aDc -0.5 dbm min

Sensitivity - Dac -34dbm


LEd INdICatORS

VS661 – aDcMinor alarm (MiN) leD (red) loss of composite video input, loss

of SDi video output, or loss of audio

Major alarm (MaJ) leD (red) board failure or communication failure

input present (ViD) leD (green) composite video input present

Power OK (Dc) leD (green) power supply ok





VS661 – Dacinput present (SDi) leD (red) SDi video present

audio group (auD) leD (yellow) audio group present

Power (+5V) leD (green) +5V Dc power present

alarm (alM) leD (yellow) flashes with alarm, normally OFF

Set-up and alignment 10 character alphanumeric display

ELEmENt maNagEmENtcompatible with FcS183-aeMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.


Voltage +3.3V, +5V, +12V, -12V






ORdERINg OPtIONSVS661-aDc composite analog audio and video to

component SDi digital converter

VS661-Dac component SDi digital to composite analog audio and video converter. SFP optics sold separately

• Embedsuptofourchannelsofanalogaudio• 20-bitaudioquantization• PassesSMPTE-259M270MbpsSDIpathologicalsequencetest•MeetsUStelcoTV-1servicespecifications(GR-338-CORE)• ExceedsRS250Cshorthaulspecifications• Proprietaryselectablecomb/bandsplitfilteringfortopqualitydynamic

performance• Automaticcableequalizationupto300mforBelden8281• Frontpanelmonitorandcalibrationadjustments•User-definablealarmsbasedonpriority• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550andany



VS661-ADC

AnalogAudio


CH1 (L1)

CH2 (R1)

CH3 (L2)

CH4 (R2)

SDI270MbpsNetwork

VS661-DAC

AnalogAudio


CH1 (L1)

CH2 (R1)

CH3 (L2)

CH4 (R2)

SDI


dIgItaL vIdEOStandards HDSDi (SMPTe-292M)

SDi (SMPTe-259M) SDTi (SMPTe-305M) 19.392Mbps (SMPTe-310M) DVb-aSi (eN50083-9)



connector bNc

impedance 75 ohm

Data rate up to 1.485 gbpsequalization up to 120m w/belden 1694


connector Sc/Pc

laser Type Video SFP




connector Sc/Pc

receiver Type aPD Pigtail




LEd INdICatORSVS251-eo VS251-oelaser failure loss of video loss of video loss of input Mute (laser disabled) bypass Dc power Dc power



alarms loss of input loss of video (VS251-Oe) laser transmitter failure (VS251-eO)

Status Transmitter enabled/disabled (VS251-eO) SFP transmitter wavelength (VS251-eO) Data rate (VS251-Oe) bypass enabled/disabled (VS251-Oe) SFP transmitter panel level SFP receiver panel Model and serial number

controls laser transmitter enable/disable (VS251-eO)


Voltage +5V,






ORdERINg OPtIONSVS251-1310-eO 1310nm laser

VS251-1550-eO-S 1550nm laser

VS251-1470-eO-c 1470nm cWDM laser








VS251-Oe aPD receiver

Hd-SdI, SdI, SdtI, atSC and aSI Fiber Optic transport

vS251

High Definition

VeNTura

1.1

•HD-SDI,SDI,SDTI,ATSCandASIcompatible• Automaticdatarateselection• PassesSMPTE-259M270MbpsSDIpathologicaltestsequence• Lossofinput,lossofvideo,laserfailureandDCpowerLEDs• Externalmajorandminorrelaycontactclosurealarms• Automaticcableequalizationupto120mwithBelden1694• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU




OPERatION This powerful HD/SD processor can be configured to provide electrical to optical, optical to electrical interfacing or as an optical to optical repeater. The unique design provides full jitter management of all HD/SD rates. 1310/1550nm wavelengths as well as the sixteen cWDM wavelengths are supported using a comprehensive range of VPg-provided SFP optical modules. SFP DWDM is supported by enabling additional scrambling that allows SMPTe pathological patterns to pass error-free through all DWDM network elements. element management provides detailed analysis of signal status, with crc checking as well as optical interface monitoring and card status with Web browser and SNMP support. control of all card functions is available through element management or on-board switches. The card is ideal for difficult telco environments where both large losses and poor dispersion characteristics associated with legacy fiber plant are overcome with carrier class long-reach optics and jitter management techniques unique to VPg equipment designs.

vIdEO INPutS Standards HD-SDi SMPTe 292M

SDi SMPTe 259M SDTi SMPTe 305M aTSc SMPTe 310M DVb-aSi eN50083-9

JIttER PERFORmaNCETight telecom level jitter tolerance specifications are maintained at all SD/HD inputs, while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs.

Standard Measurement

SD/aSi SMPTe rP184 SMPTe rP192/eg33HD SMPTe rP184 SMPTe rP192

ELECtRICaL INPutNumber of inputs 1

connector Type 75 ohm bNc

return loss >15db at 1.5gbpsequalization >150m of belden 1694 at 1.5gbps

ELECtRICaL OutPutSNumber of Outputs 2 Jitter managedconnector Type 75 ohm bNc

OPtICaL INPutNumber of inputs 1

connector Type Sc/Pc

Wavelength range 1270 – 1610nm

Sensitivity level –32dbm (worst case)Overload level –8dbm (worst case)

OPtICaL OutPutNumber of Outputs 1


Wavelengths 1310/1550nm, cWDM DWDM with lSb scrambling

Power Out 0dbm min, +1dbm typical

FRONt PaNEL LEd INdICatORSThere is a row of nine leDs comprehensively signaling the status and alarm conditions of the card. Depending on the configuration of the card the leDs have different meanings. This is tabulated in the manual.

EXtERNaL aLaRmSN/c relay contact outputs for major and minor alarms. each alarm and status condition can be programmed as a major or minor alarm or can be disabled if not in use.

ELEmENt maNagEmENt The VS251-SFP is compatible with the standard FcS183 and the FcS183-aeMS advanced element Management System. both management systems are Web browser and SNMP enabled. The FcS183 provides the simplest Web interface with SNMP supported limited to major and minor pre-defined events. The FcS183-aeMS has more comprehensive browsing with virtual leD front-panel emulation and an SNMP Mib covering all status, control and alarm variables on the card.

PHySICaL aNd ENvIRONmENtaLrequires only one slot of the VS103 ten-slot chassis or the VS101 three-slot chassis.


Operating Temp 0 ˚c to 50 ˚c ambient

Storage Temp –40 ˚c to 85 ˚c


aGency compLiance Telco NebS level 3 Safety ul, cSa, ce low voltage directiveeMc Fcc Part 15 class a, ce eMc directive

ORdERINg INFORmatIONVS251-SFP (1310/1550nm and cWDM applications)

“SFP” represents locations for small form factor pluggable (SFP) optical devices.

use of one of the VPg SFP-TV or SFP-TrV family of high performance video SFPs covering 1310/1550nm and cWDM wavelengths with both PiN and aPD receiver options. Please see the VPg SFP Selection guide for further details.

SFPD denotes the use of DWDM SFPs. These devices are available as transceivers. Please see the VPg SFP Selection guide for further details.

High Definition 1.1

VeNTura

Hd-SdI/SdI/SdtI/aSI/atSC Fiber Optic tX/RX/tRX

vS251-SFP

• 10Mbpsto1.5Gbpswithjittermanagedandnon-jittermanagedmodes• Jittermanagementat1.485GbpsHD,1.4835GbpsHDand270MbpsSDI/

SDTi/aSi, other rates supported in bypass mode• SFPopticalinterfacessupporting1310nm,1550nm,CWDMandDWDM•Minimumof32dBopticaldynamicrange• SFPopticsallowforoptimumsparing;cardisconfigurableasE-O,O-Eand

O-O repeater or wavelength shifter

• FullCRCandEDHcheckinginHD-SDIandSDImodes• BuiltinHD-SDItestsignalgeneratorforremotenetworktesting• TransportsallHDandSDpathologicalpatternswithout

additional scrambling at 1310/2550nm and cWDM • AdditionalscramblingforDWDMapplications• SNMPandWebbrowsersupportedunderVenturaAEMSmanagement•NEBSLevel3compliant

HD-SDI

SDI/ASIOpt RX

HD-SDI

SDI/ASICab EQ Jitter

BufferDriver

Driver Laser

Driver

EDH/CRCCount

EDH/CRCReset

LSB Dither

HD-SDI

Generator

HD-SDI

SDI/ASI

HD-SDI

SDI/ASI

HD-SDI

SDI/ASI

OR


Hd-SdI/SdI/SdtI/aSI/atSCdual Channel Fiber Optic tX/RX/tRX/Switch*

vS252-SFP-SFP

High Definition

VeNTura

1.1

The VS252 is a multifunction optical interface card in the High-Definition group of the Ventura™ product line. The card is dual-channel and supports TS bit rates from 10Mbps through 1.5gbps.

it can be operated in various modes providing optical transport, protection and monitoring of HD-SDi, SDi, aSi and SMPTe-310 video.

• 10Mbpsto1.5Gbpswithjittermanagementandnon-jittermanagementmodes

• Jittermanagementat1.485GbpsHD,1.4835GpbsHDand270MpbsSDI/SDTi/aSi

•Otherratessupportedinnon-jittermanagement(bypass)mode• SFPopticalinterfacessupporting1310nm,1550nm,CWDMandDWDM•Minimumof32dBopticaldynamicrange• SimplifiedsinglecardholdssparesconfigurableforE-O,O-EandO-O

repeater, wavelength shifter or switch* with any wavelength• FullCRCandEDHcheckinginHD-SDIandSDImodes• Built-inHD-SDItestsignalgeneratorforremotenetworktesting• TransportsallHDandSDpathologicalpatternswithoutadditional

scrambling at 1310/1550nm and cWDM• SNMPandWebbrowsersupportedunderVenturaAEMSelement

management•NEBSLevel3compliant

HD-SDI

SDI/ASI

HD-SDI

SDI/ASI

Opt RX

HD-SDI

SDI/ASI

HD-SDI

SDI/ASI

Cab EQ JitterBuffer

2x2Switch*

NMS

Driver

Driver Laser

Driver

EDH/CRCCount

EDH/CRCReset

LSB Dither

HD-SDI

Generator

HD-SDI

SDI/ASI

HD-SDI

SDI/ASI

HD-SDI

SDI/ASI

HD-SDI

SDI/ASI

HD-SDI

SDI/ASI

HD-SDI

SDI/ASI

OR

Opt RX

Cab EQJitterBuffer

EDH/CRCCount

EDH/CRCReset

LSB Dither

OR Driver

Driver

Driver Laser


OPERatION This powerful HD/SD processor can be configured to provide electrical to optical, optical to electrical interfacing or as an optical to optical repeater and/or wavelength shifter. With two fully independent channels the card can also operate as an HD/SD transceiver, a 2x2 changeover switch or an automatic HD/SD protection switch in either the electrical or optical domain.

The unique design provides full jitter management of all HD/SD rates. 1310/1550nm wavelengths as well as the sixteen cWDM wavelengths are supported using a comprehensive range of VPg provided SFP optical modules. SFP DWDM is supported scrambling that allows SMPTe pathological patterns to pass error-free through all DWDM network elements. element management provides detailed analysis of signal status, with crc checking as well as optical interface monitoring and card status with Web browser and SNMP support.

control of all card functions is available through element management or through on-board switches. The card is ideal for different telco environments where both large losses and poor dispersion characteristics associated with legacy fiber plant are overcome with carrier class long-reach optics and jitter management techniques unique to VPg equipment designs.

vIdEO INPutS Standards HD-SDi SMPTe 292M

SDi SMPTe 259M SDTi SMPTe 305M aTSc SMPTe 310M DVb-aSi eN50083-9

JIttER PERFORmaNCETight telecom level jitter tolerance specifications are maintained at all SD/HD inputs, while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs.

Standard Measurement


ELECtRICaL INPut (EaCH CHaNNEL)Number of inputs 1



ELECtRICaL OutPutS (EaCH CHaNNEL)Number of Outputs 2 Jitter managedconnector Type 75 ohm bNc

OPtICaL INPut (EaCH CHaNNEL)Number of inputs 1


Wavelength range 1270–1610nm

Sensitivity level -32dbm (worst case)Overload level –8dbm (worst case)

OPtICaL OutPut (EaCH CHaNNEL)Number of Outputs 1


Wavelengths 1310/1550nm, cWDM DWDM with lSb scrambling


FRONt PaNEL LEd INdICatORSThere are two rows of nine leDs comprehensively signaling the status and alarm conditions of each channel. Depending on the configuration of the card the leDs have different meanings. This is tabulated in the manual.


ELEmENt maNagEmENt The VS252 is compatible with the standard FcS183 and the FcS183-aeMS (advanced element Management System). both NM systems are Web browser and SNMP enabled. The FcS183 provides the simplest Web interface with SNMP support limited to major and minor pre-defined events. The FcS183-aeMS has more comprehensive browsing with virtual leD front-panel emulation and an SNMP Mib covering all status, control and alarm variables on the card.

PHySICaL aNd ENvIRONmENtaLrequires only one slot of either the VS103 ten-slot chassis or the VS101 three-slot chassis



Storage Temp –40 ˚c to 85 ˚c


aGency compLiance Telco NebS level 3 Safety ul, cSa, ce low Voltage directiveeMc Fcc Part 15 class a, ce eMc directive

ORdERINg INFORmatIONVS252-SFP-SFP (1310/1550nm and cWDM applications)

VS252-SFPD-SFPD (DWDM applications) SFP and SFPD represent locations for small form factor pluggable (SFP) optical devices.

The VS252 supports both standard and DWDM applications. However to use DWDM SFPs the VS252 must be ordered with a special adapter. This adapter may be field retrofitted or the VS252 can be returned to the factory for conversion to DWDM. consult factory for details.

SFP denotes use of one of the VPg SFP-TV or SFP-TrV family of high performance video SFPs covering 1310/1550nm and cWDM wavelengths with both PiN and aPD receiver options. Please see the SFP Selection guide for further details.

SFPD denotes the use of DWDM SFPs. These devices are available as transceivers. Please see the SFP Selection guide for further details.

High Definition 1.1

VeNTura

vS252-SFP-SFP


Hd-SdI 4xaES audio Embedder Hd-SdI/SdI/SdtI/aSI/atSC Fiber Optic transmitter

vS254-E-SFP

High Definition

VeNTura

1.1

The VS254-e-SFP is an HD-SDi audio embedder and optical transmit card in the VS25x group of High-Definition solutions. as well as embedding four aeS audio channels it also supports Dolby-e and any aeS framed data. The card can also be configured to transport bit rates from 10Mbps through 1.5gbps through its SFP fiber interfaces.

• EmbedsuptofourAES/EBUaudiochannels• TransparentlyhandlesanyAES-frameddata,suchasDolby-E• 10Mbpsto1.5Gbpswithjittermanagedandnon-jittermanagedmodes• Jittermanagementat1.485GbpsHD,1.4835GbpsHDand270MbpsSDI/

SDTi/aSi•Otherratessupportedinbypassmode• SFPopticalinterfacessupporting1310nm,1550nm,CWDMandDWDM•Minimumof0dBmopticallaunchpower• Simplifiedsinglecardspares-holding,configurableEOtoanywavelength

by simple SFP change• FullCRCandEDHcheckinginHD-SDIandSDImodes• Built-inHD-SDItestsignalgeneratorforremotenetworktesting• TransportsallHDandSDpathologicalpatternswithoutadditional

scrambling at 1310/1550nm and cWDM• SNMPandWebbrowsersupportunderVenturaAEMSmanagement•NEBSLevel3compliant

4xAES

Dolby-E/AC-3

AES RX

HD-SDI


Buffer

Sample RateConvertersand Bypass

Driver

Driver Laser

Driver

EDH/CRCCount

EDH/CRCReset

LSB Dither

HD-SDI

Generator

HD-SDI

SDI/ASI

HD-SDI

SDI/ASI

HD-SDI

SDI/ASI

OR


OPERatION This powerful HD/aeS processor embeds up to four synchronous or asynchronous aeS channels into an HD-SDi video signal. all popular HD formats in the 1485Mbps and the 1485Mbps/1001 are supported. Disabling the sample rate converters allows the transparent carriage of Dolby-e or any aeS-framed data. by adding an SFP, the card is readily transformed into a fiber optic network interface. configurable additional scrambling allowing can be enabled allowing SMPTe pathological patterns to pass error-free through all DWDM network elements. element management provides detailed analysis of video and audio signal status, with crc checking as well as optical interface monitoring and card status with Web browser and SNMP support. control of all card functions is available through element management or through on-board switches.

vIdEO INPutS StanDarDSHD-SDi SMPTe 292M

1080i/50, 1080i/60, 1080i/59.94, 1080p/24, 1080p/25, 1080p/23.98, 720p/60, 720p/59.94

SDi SMPTe 259M

SDTi SMPTe 305M

aTSc SMPTe 310MDVb-aSi eN50083-9

JIttER PERFORmaNCETight telecom level jitter tolerance specifications are maintained at all SD/HD inputs while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs.

Practice Measurement






OPtICaL OutPutNumber of Outputs 1


Wavelengths 1310/1550nm, cWDM, DWDM with lSb scrambling


audIO INPutSStandards SMPTe 299M (embedding)

aeS-3 (balanced and un-bal) Dolby-e

INPutSNumber of inputs 4

connector Type a 110 ohm, bal, 3-pin Phoenix

(a, b are Options) b 75 ohm, unbalanced

Sampling rage 48kHz

level a 1Vp-p +/- 10% b 0.5 to 10V p-p

FRONt PaNEL LEd INdICatORSa row of nine leDs comprehensively signal the status and alarm conditions of the card. Depending on the configuration of the card the leDs have different meanings. This is tabulated in the manual.


ELEmENt maNagEmENt The VS254 is compatible with the standard FcS183 and the FcS183-aeMS (advanced element Management System). both management systems are Web browser and SNMP enabled. a built-in-test HD-SDi generator can be enabled and switched in remotely to fully test a link. The FcS183-aeMS provides the simplest Web interface with SNMP supported limited to major and minor pre-defined events. The FcS183-aeMS has more comprehensive browsing with virtual leD front-panel emulation and an SNMP Mib covering all status, control and alarm variables on the card.




Storage Temp –40 ˚c to + 85 ˚c



ORdERINg INFORmatIONVS254-e-SFP (1310/1550nm and cWDM applications)

“SFP” represents locations for small form factor pluggable (SFP) optical devices.

The VS254 supports both standard and DWDM applications. However to use DWDM SFPs the VS254 must be ordered with a special adapter. This adapter may be field retrofitted or the VS254 can be returned to the factory for conversion to DWDM. consult factory for details.

SFP denotes use of one of the VPg SFP-TV family of high performance video SFPs covering 1310/1550nm and cWDM wavelengths. Please see the SFP Selection guide for further details.

High Definition 1.1

VeNTura

vS254-E-SFP


Hd-SdI 4xaES audio de-embedder Hd-SdI/SdI/SdtI/aSI/atSC Fiber Optic Receiver

vS254-d-SFP

High Definition

VeNTura

1.1

The VS254-D-SFP is an HD-SDi audio de-embedder and optical receive card in the VS25x group of High-Definition solutions. as well as de-embedding four aeS audio channels it also supports Dolby-e and any aeS framed data. The card can also be configured to optically receive bit rates from 10Mbps through 1.5gbps through its SFP fiber interfaces.

•De-embedsuptofourAES/EBUaudiochannels• TransparentlyhandlesanyAES-frameddatasuchasDolby-E• 10Mbpsto1.5Gbpswithjittermanagedandnon-jittermanagedmodes• Jittermanagementat1.485GbpsHD,1.4835GbpsHDand270MbpsSDI/

SDTi/aSi•Otherratessupportedinre-clockerbypassmode• SFPPINandAPDopticalinterfacesavailable•Minimumof0dBmopticallaunchpower• Simplifiedsinglecardspares-holding,configurableEOPINorAPDby

simple SFP change• FullCRCandEDHcheckinginHD-SDIandSDImodes• Built-inHD-SDItestsignalgeneratorforself-test• ReceivesallHDandSDpathologicalpatternswithoutadditional

scrambling with both PiN and aPD options• SNMPandWebbrowsersupportunderVenturaAEMSmanagement•NEBSLevel3compliant

HD-SDI

SDI/ASIOpt RX

HD-SDI


BufferDriver

Driver

AES TX

EDH/CRCCount

EDH/CRCReset

DeEmbed Audio

LSB DitherHD-SDI

Generator

HD-SDI

SDI/ASI

HD-SDI

SDI/ASI

4xAES

Dolby-EAC-3

OR


OPERatION This powerful HD/aeS processor de-embeds up to four aeS channels from an HD-SDi video signal. all popular HD formats in the 1485Mbps and the 1485Mbps/1001 are supported. Dolby-e or any aeS-framed data is also de-embedded. by adding an SFP the card is readily transformed into a fiber optic network interface. if additional scrambling has been enabled in the VS254-e to allow SMPTe pathological patterns to pass error-free through DWDM network elements, the VS254-D will pass those signals. element management provides detailed analysis of video and audio signal status, with crc checking as well as optical interface monitoring and card status with Web browser and SNMP support. control of all card functions is available through element management or through on-board switches.

vIdEO INPutS StanDarDSHD-SDi SMPTe 292M

1080i/50, 1080i/60, 1080i/59.94, 1080p/24, 1080p/25, 1080p/23.98, 720p/60, 720p/59.94

SDi SMPTe 259M

SDTi SMPTe 305M

aTSc SMPTe 310MDVb-aSi eN50083-9

JIttER PERFORmaNCETight telecom level jitter tolerance specifications are maintained at all SD/HD inputs while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs.

Practice Measurement






OPtICaL INPutNumber of inputs 1


Wavelengths 1270nm–1610nm

Sensitivity at 1.5gbps –32dbm (worst case)Overload –8dbm

audIO OutPutSStandards SMPTe 299M (de-embedding)

aeS-3 (balanced and un-bal) Dolby-e

OutPutSNumber of Outputs 4

connector Type a 110 ohm, bal, 3-pin Phoenix

(a, b are Options) b 75 ohm, unbalanced

Sampling rage 48kHz

level a 1Vp-p +/- 10% b 0.5 to 10V p-p

FRONt PaNEL LEd INdICatORSa row of nine leDs comprehensively signal the status and alarm conditions of the card. Depending on the configuration of the card the leDs have different meanings. This is tabulated in the manual.


ELEmENt maNagEmENtThe VS254 is compatible with the standard FcS183 and the FcS183-aeMS (advanced element Management System). both management systems are Web browser and SNMP enabled. a built-in-test HD-SDi generator can be enabled and switched in remotely to self-test the card. The FcS183-aeMS provides the simplest Web interface with SNMP supported limited to major and minor pre-defined events. The FcS183-aeMS has more comprehensive browsing with virtual leD front-panel emulation and an SNMP Mib covering all status, control and alarm variables on the card.



Operating Temp 0 to 50 c ambient

Storage Temp –40 ˚c to +85 ˚c



ORdERINg INFORmatIONVS254-D-SFP (PiN and aPD for 1310/1550 and cWDM)

VS254-e-SFPD (aPD for DWDM applications) SFP and SFPD represent locations for small form factor pluggable (SFP) optical devices. The VS254 supports both PiN, and aPD receivers for standard and cWDM as well as aPD for DWDM applications where the additional scrambling is used. However to use DWDM SFPs the VS254 must be ordered with a special adapter. This adapter may be field retrofitted or the VS254 can be returned to the factory for conversion to DWDM. consult factory for details. SFP denotes use of one of the VPg SFP-TV family of high performance video SFPs with PiN or aPD technology. Please see the SFP Selection guide for further details. The standard connector panel supports balanced aeS inputs with Phoenix 3-way connectors. if unbalanced bNcs are required please specify at the time of order.

High Definition 1.1

VeNTura

vS254-d-SFP


High Definition

VeNTura

1.1



# of inputs 1


connector bNc

impedance 75 ohm

Quantization 12-bit


SNr >70db




# of inputs 1



connector bNc

impedance 75 ohm





# of inputs 4




Quantization 20-bit



THD <0.05% (20Hz to 20KHz, @ 0 dbFS)










to 48kHz


connector Sc/Pc

laser type SFP




LEd INdICatORSVideo mode HD/SD/aSiloss of inputcrc/eDH for HD/SDaudio mode analog/aeSloss of audio analog 1, 2, 3, 4

aeS 1, 2



Voltage +3.3V, +5V, +12V, -12V







vS551-d-adC-SFP








# of outputs 2


connector bNc

impedance 75 ohm

Quantization 12-bit


SNr >70db





# of outputs 2


connector bNc

impedance 75 ohm





# of outputs 4



Sampling rate 48KHz

Quantization 20-bit














connector Sc/Pc





LEd INdICatORSVideo Mode HD/SD/aSiloss of input (local and remote)crc/eDH for HD/SDaudio mode analog/aeSloss of audio analog 1, 2, 3, 4




Voltage +3.3V, +5V, +12V, -12V




fiber receiver


vS551-d-daC-SFP





High Definition 1.1

VeNTura


ENCOdER dIgItaL vIdEO# of inputs 1 HD-SDi or 3g-SDi coax

# of Outputs 1 SDTi coax (SMPTe 305) 1 HD-SDi or 3g-SDi front panel monitor coax

connector coax

ENCOdER dIgItaL audIO# of inputs 4connector aeS/ebu 110 ohm balanced or 75 ohm

single ended units

dECOdER dIgItaL vIdEO# of inputs 1 SDTi coax (SMPTe 305)

# of Outputs 1 HD-SDi or 3g-SDi coax 1 HD-SDi or 3g-SDi front panel monitor coax

connector coax

dECOdER dIgItaL audIO# of Outputs 4connector aeS/ebu 110 ohm balanced or 75 ohm

single ended units

ENCOdER aNd dECOdER OPtICaL tRaNSCEIvER# of outputs/inputs 1connector SFP transceiver for ethernet, SDTi, Oc3/

STM-1, Oc12/STM-4

ENCOdER aNd dECOdER CLOCk INPut1 biTS clock input for use with SONeT

LEd INdICatORSPower indicator loss of input crc/eDH for HD/SD Optical fault indicator loss of audio

ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Due to the complexity of VS901 functions, element management is its primary method of configuration and operation.


Voltage +3.3V, +5V, +12V, -12V



Storage Temperature –40 ˚c to 85 ˚c ambientcompliance NebS level 3, ul, cSa, ce,


ORdERINg OPtIONSVS901-Te-27 HD/SDi compression via JPeg 2000 and

mapping to SDTi (SMPTe 305). carriage of up to four pre embedded aeS streams. Separate carriage of Vbi information.

VS901-TD-27 SDTi receiver with decompression via JPeg 2000 of HD-SDi. re embedding of up to four transported aeS streams and any transported Vbi data


JPEg 2000 Compression over SdtI

vS901-tE-27 / vS901-td-27

iP Network interfaces

VeNTura

1.1

• Artifact-freeMotionJPEG2000compression—noblocking,tilingormotiondependence

• Visuallylosslesscompressiontoa12:1compressionratio•Near-mathematicallylosslesscompressiontoa2:1compressionratio•User-configurablecompressionratio,eitherbyexplicitsettingorby

selecting maximum bandwidth of transport interface•Multiplexesaudiointothetransportstream,eitherpre-embeddedintothe

HD-SDi signal or by locally embedding from aeS interfaces on the encoder• SupportsallHDvideoframingformatsat1485Mbps,1483.52Mbps•OccupiesasingleVenturachassisslot

12 34

12 34

VS901-TE-27 VS901-TD-27

HD/SDI/ASI HD/SDI/ASI

JPEG2000Encoder

AES Inputs

AES 1AES 2AES 3AES 4


AES Outputs

HD HD HDHD

CompressedHD Video

CompressedHD Video

SDI/ASI SDI/ASI

270MbpsNetwork

SDTI

SDTIAudio & Data De-embedder

SFPMUX

1 2 3 4 1 2 3 4

Data Data

JPEG2000DecoderSDTI

SDTIAudio & Data

Embedder

SFP

DE-MUX


ENCOdER dIgItaL vIdEO# of inputs 1 HD-SDi, SMPTe 292M, SMPTe 299M

# of outputs 1 HD-SDi front panel monitorconnector 75 Ohm bNc

ENCOdER dIgItaL audIO# of inputs 4connector aeS/ebu 110 Ohm balanced or 75 Ohm

single ended units

dECOdER dIgItaL vIdEO# of outputs 2 HD-SDi or 75 Ohm bNc

1 HD-SDi front panel monitorconnector 75 Ohm bNc

dECOdER dIgItaL audIO# of outputs 4connector aeS/ebu 110 Ohm balanced or 75 ohm

single ended units

ENCOdER aNd dECOdER EtHERNEt# of outputs/inputs 1connector 100/1000 base-T rJ45 ethernet connector

ENCOdER aNd dECOdER OPtICaL tRaNSCEIvER# of outputs/inputs 1

connector SFP transceiver for ethernet, dual Sc/Pc

LEd INdICatORSPower indicator loss of HD video loss of audio crc errors and iP Fec Optical fault indicator

ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Due to the complexity of VS901 functions, element management is its primary method of configuration and operation.


Voltage +3.3V, +5V, +12V, -12V


Operating temperature 0˚ to 50˚c chassis ambient

Storage temperature –40 ˚c to 85 ˚c ambientcompliance NebS level 3, ul, cSa, ce,


ORdERINg OPtIONSVS901-ie-ge HD/SDi compression via JPeg 2000 and

mapping to gigabit ethernet. carriage of up to four pre-embedded aeS streams. Separate carriage of aNc data information

VS901-TD-27 gigabit ethernet receiver with decompression via JPeg 2000 of HD-SDi. re-embedding of up to four transported aeS streams and any transported aNc data

For optical interface options, see the Ventura SFP index data sheet.

iP Network interfaces 1.1

VeNTura

JPEg 2000 Compression Over gigabit Ethernet

vS901-IE-gE* / vS901-Id-gE*

• EncoderanddecodereachoccupyasingleVenturachassisslot• SupportsallHDvideoframingformatsat1485Mbpsand1483.5Mbps•Multiplexesuncompressedaudiointothetransportstream,eitherpre-

embedded into the HD-SDi signal or by locally embedding from aeS interfaces on the encoder

• Transparentcarriageofancillarydata• Artifact-freemotionJPEG2000compression–noblocking,tilingormotion

dependence• Intra-frameencoding•Near-mathematicallylosslesscompressionwithaGigabitEthernetinterface• Visuallylosslesscompressiontoa12:1compressionratio• Automaticallycalculatesmathematicallylosslesscompressionratioforeach

frame to ensure constant lossless quality•ConfigurableFECwithstandardandadvancedmodesettings•ComplieswithIEEE802.3standards• IP/UDP/RTPpackets• Simultaneouselectricalandopticaloutputsfromencoder• Encodeplusdecodedelaylessthan50ms•CompatiblewithFCS183-AEMSAdvancedElementManagementSystem

12 34

12 34

VS901-IE-GE VS901-ID-GE

HD HD

JPEG2000Encoder

AES Inputs



AES Outputs

HDHD

CompressedHD Video

CompressedHD Video270Mbps

Network

100/1000 Base-T 100/1000 Base-T

100/1000 Base-T100/1000 Base-T

Audio & Data De-embedder

SFPMUX

1 2 3 4 1 2 3 4

ANC Data ANC Data

JPEG2000Decoder

Audio & Data Embedder

SFP

DE-MUX


dIgItaL I/O# of inputs 1

# of Outputs 1

connector bNc

impedance 75 ohm



connector Sc/Pc

Data rate 270Mbps

laser Type SFP




connector Sc/Pc






connector Db9 Female

receive Data Jitter <±40nsreceiver Termination 124 ohm

LEd INdICatORSchannel 1 i/O activity loss of optical input loss of frame laser failure Dc power


ELEmENt maNagEmENtcompatible with the FcS183 and FcS183-aeMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

alarms loss of optical input loss of frame loss of input loss of channel i/O activity

Status Optical/electrical receiver mode laser transmitter enabled/disabled Model and serial number

controls receiver mode optical/electrical laser transmitter enable/disable iD setting for the VS811 (0-65535)


Voltage +3.3V, +5V, +12V, -12V






ORdERINg OPtIONSVS701-SFP rS422 control fiber optic transceiver

SFp optionSSFP-TV-1310-SF Video 270/1500Mbps, TX, non-cWDM FP SFP-TV-1550-SD Video 270/1500Mbps, TX, non-cWDM DFb SFP-TV-1470-c Video 270/1500Mbps, TX, cWDM SFP-TV-1490-c Video 270/1500Mbps, TX, cWDM SFP-TV-1510-c Video 270/1500Mbps, TX, cWDM SFP-TV-1530-c Video 270/1500Mbps, TX, cWDM SFP-TV-1550-c Video 270/1500Mbps, TX,cWDM SFP-TV-1570-c Video 270/1500Mbps, TX, cWDM SFP-TV-1590-c Video 270/1500Mbps, TX, cWDM SFP-TV-1610-c Video 270/1500Mbps, TX, cWDM SFP-rV-PiN Video 270/1500Mbps, rX, PiN

RS422 Control Fiber Optic transceiver

vS701

Data

VeNTura

1.1

•OnefullduplexindependentRS422channel•Upto2Mbps• Lowtimingjitterduetohighoversamplingrate•CanbeswitchedthroughandSDIrouter• Automaticcableequalizationupto300mforBelden8281•Opticalandelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU



RS422 CH1

1310/1550/CWDM

270Mbps

TX

RX

TX

RX

VS711 RS422 CH1

1310/1550/CWDM

270Mbps

RX

TX

RX

TX

VS711270MbpsNetwork



# of Outputs 1

connector bNc

impedance 75 ohm



connector Sc/Pc

Data rate 270Mbps

laser Type SFP




connector Sc/Pc






connector Db25 female


LEd INdICatORSchannel 1 i/O activity channel 2 i/O activity channel 3 i/O activity channel 4 i/O activity loss of optical input loss of frame laser failure Dc power


ELEmENt maNagEmENtcompatible with the FcS183 and FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

alarms loss of optical input loss of frame loss of input loss of channel i/O activity

Status Optical/electrical receiver mode laser transmitter enabled/disabled Model and serial number

controls receiver mode optical/electrical laser transmitter enable/disable iD setting for the VS811 (0-65535)


Voltage +3.3V, +5V, +12V, -12V






ORdERINg OPtIONSVS711-SFP-TrX Fiber optic transceiver with 4 rS422 ch.

SFp optionSSFP-TV-1310-SF Video 270/1500Mbps, TX, non-cWDM FP SFP-TV-1310-SD Video 270/1500Mbps, TX, non-cWDM DFb SFP-TV-1550-SD Video 270/1500Mbps, TX, non-cWDM DFb SFP-TV-1470-c Video 270/1500Mbps, TX, cWDM SFP-TV-1490-c Video 270/1500Mbps, TX, cWDM SFP-TV-1510-c Video 270/1500Mbps, TX, cWDM SFP-TV-1530-c Video 270/1500Mbps, TX, cWDM SFP-TV-1550-c Video 270/1500Mbps, TX, cWDM SFP-TV-1570-c Video 270/1500Mbps, TX, cWDM SFP-TV-1590-c Video 270/1500Mbps, TX, cWDM SFP-TV-1610-c Video 270/1500Mbps, TX, cWDM SFP-rV-PiN Video 270/1500Mbps, rX, PiN

Data 1.1

VeNTura

quad RS422 Control Fiber Optic transceiver

vS711

• FourfullduplexindependentRS422channels•Upto2Mbpsperachannel• Lowtimingjitterduetohighoversamplingrate•CanbeswitchedthroughanSDIrouter• Automaticcableequalizationupto300mforBelden8281•Opticalandelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU



RS422 CH1

RS422 CH2

RS422 CH3

RS422 CH4

1310/1550/CWDM

270Mbps

TX

RX

TX

RX

VS711

RS422 CH1

RS422 CH2

RS422 CH3

RS422 CH4

1310/1550/CWDM

270Mbps

RX

TX

RX

TX

VS711270MbpsNetwork



# of Outputs 1

connector rJ45

impedance 100 ohm

Data rate 100/10Mbpsequalization 100M cat 5e


connector Sc/Pc

Data rate 100/10Mbps

laser Type SFP

laser Wavelengths 1310nm, 1510nm, 1530nm, 1550nm, cWDM, DWDM



connector Sc/Pc

receiver Type SFP




LEd INdICatORSFiber full/half duplex Fiber link/activity auto negotiate 10 M 100 M 1 g uTP full/half duplex uTP link/activity Dc power



alarms Daughter card power alarm Fiber link alarm SFP optical source fault SFP optical low light SFP transmitter output power SFP iinternal supply voltage SFP transmitter internal bias current SFP internal temperature uTP link alarm

Status SFP laser transmitter present Full duplex mode for fiber selected auto negotiation activated link speed 100Mbps rJ45 uTP is in full duplex mode SFP transmitter wavelength Model and serial number



Voltage +3.3V, +5V, +12V






ORdERINg OPtIONSVS721 10/100 base-T ethernet


10/100 Base-t Ethernet Optical transceiver

vS721

Data

VeNTura

1.1

• Full-featured10/100Base-TEthernetmetropolitantransportsolution•Greaterthan30dBopticallinkbudget• SFPopticsallowforoptimumsparingandfastconfigurationtoavailable

Ventura wavelengths• Standardsbasedonthefiberinterface—100Base-T•UTPportsupports10/100andhalf/fullduplexaswellasauto-negotiation• Automaticcableequalizationupto100matgigabitrate• FrontpanelLEDinformationprovideslinkdiagnosticsallowingforinstant

fault location• BandwidthcontrolallowsserviceproviderstoconfigureUTPrateto10or

100 Mbps•CanbeusedinbothVS101andVS103Venturachassis•NEBSLevel3compliant•CompatiblewiththeFCS183-AEMSAdvancedElementManagement


1310/1550/CWDM 1310/1550/CWDMTX

RX

100 Base-T 100 Base-T

RJ-4510/100Base-T

270MbpsNetworkVS721

RX

TXRJ-4510/100Base-T

VS721



# of Outputs 1

connector rJ45

impedance 100 ohm

Data rate 1000/100/10Mbpsequalization 100M cat 5e


connector Sc/Pc

Data rate 1000/100/10Mbps

laser Type SFP

laser Wavelengths 1310nm, 1510nm, 1530nm, 1550nm, cWDM, DWDM



connector Sc/Pc

receiver Type SFP




LEd INdICatORSFiber full/half duplex Fiber link/activity auto negotiate 10 M 100 M 1 g uTP full/half duplex uTP link/activity Dc power

EXtERNaL aLaRmSN/O relay contact outputs for major and minor alarm signals.

PHySICaL aNd ENvIRONmENtaLresides in a single slot of a VS101 or VS103 Ventura series chassis.

Voltage +3.3V, +5V, +12V






ELEmENt maNagEmENtcompatible with the FcS183-aeMS advanced element Management System that features SNMP and Web browser interfaces to monitor and configure card status, alarms and controls.

alarms Daughter card power alarm Fiber link alarm SFP optical source fault SFP optical low light SFP transmitter output power low SFP internal supply voltage high SFP internal supply voltage low SFP transmitter internal bias current high SFP transmitter internal bias current low SFP internal temperature high SFP internal temperature low SFP transmitter output power high uTP link alarm

Status SFP laser transmitter present Full duplex mode for fiber selected auto negotiation activated link speed 1000Mbps rJ45 uTP is in_full_duplex_mode SFP transmitter wavelength Model and serial number


ORdERINg OPtIONSVS722-TrX-SFP

SFp optionSSFP-Tr1-1310-PiN-S 1gbps, TrX, non-cWDM SFP-Tr1-1550-PiN-S 1gbps, TrX, non-cWDM SFP-Tr1-1470-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1490-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1510-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1530-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1550-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1570-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1590-PiN-c 1gbps, TrX, cWDM SFP-Tr1-1610-PiN-c

Data 1.1

VeNTura

gigabit Ethernet Fiber transport

vS722

• Full-featuredGigabitEthernetmetropolitantransportsolution•Greaterthan30dBopticallinkbudget• SFPopticsallowsforoptimumsparingandfastconfigurationtoavailable

Ventura wavelengths• Standards-basedonthefiberinterface—1000Base-LX•UTPportsupports10/100/1000andhalf/fullduplexand

auto-negotiation• Automaticcableequalizationupto100matgigabitrate• FrontpanelLEDinformationprovideslinkdiagnostics

allowing for instant fault location• BandwidthcontrolallowsserviceproviderstoconfigureUTP

rate to 10 or 100 or 1000 Mbps•CanbeusedinbothVS101andVS103Venturachassis•NEBSLevel3certified•CompatiblewiththeFCS183-AEMSAdvancedElementManagement


1310/1550/CWDM 1310/1550/CWDMTX

RX

1000 Base-LX 1000 Base-LX

RJ-4510/100/1000

Base-T

270MbpsNetworkVS722

TX

RXRJ-4510/100/1000Base-T

VS722




# of inputs 1

connector bNc

impedance 75 ohm



connector ST

laser Type Pigtail, SFP



LEd INdICatORSSDi in laser fail Dc power

PHySICaL aNd ENvIRONmENtaLThe (226.54mm x 149.63mm x 51.13mm) chassis is suitable for mounting within a NeMa 4 enclosure or mounting on a flat horizontal or vertical surface with input, output and power connections to the rear.

Voltage +12V +/-1V




ORdERINg OPtIONSODu201-SFP-eO SDi/aSi e/O, no laser

ODu-PSDc Dc, 1 amp powersupply


SdI/aSI Fiber Optic transport

Odu201

Specialty

VeNTura

1.1

• SDI,SDTIandASIcompatible• Automaticdatarateselection• PassesSMPTE-259M270MbpsSDIpathologicaltestsequence• Lossofvideo,lossofinput,laserfailureandDCpowerLEDs• Automaticcableequalizationupto300mforBelden8281•Opticalandelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU

cWDM or DWDM wavelength

1310/1550/CWDM PIN Rcv’rSDI (SMPTE-259M)

SDTI (SMPTE-305M)DVB-ASI (EN50083-9)

SDI (SMPTE-259M)SDTI (SMPTE-305M)DVB-ASI (EN50083-9)270Mbps

Network270Mbps

270Mbps


270Mbps

ODU201 VS231-OE


dIgItaL I/OStandards SDi (SMPTe-259M)


# of inputs 1

connector bNc

impedance 75 ohm



connector ST

Data rate 270Mbps, rS422

laser Type SFP




connector ST

receiver Type PiN







LEd INdICatORSrS422 aLarmS SDi aLarmS laser fail SDi in low light laser fail lOF (optical input) rS422 in rS422 out Dc power

PHySICaL aNd ENvIRONmENtaLThe (226.54mm x 149.63mm x 51.13mm) chassis is suitable for mounting within a NeMa 4 enclosure or mounting on a flat horizontal or vertical surface with input, output and power connections to the rear.

Voltage +12V +/-1V

Power consumption 8.5W typical



ORdERINg OPtIONSODu271-SFP-eO-SFP SDi/422 e/O, TX + rS422 Transceiver

ODu-PSDc Dc, 1 amp Power Supply


Specialty 1.1

VeNTura

RS422 Control Fiber Optic transceiver

Odu271

• SingleRS422channel•Upto2Mbpsperchannel• Lowtimingjitterduetohighoversamplingrate•CanbeswitchedthroughanSDIrouter• SDI,SDTIandASIcompatible• Automaticdatarateselection• PassesSMPTE-259M270MbpsSDIpathologicaltestsequence• Lossofvideo,lossofinput,laserfailureandDCpowerLEDs• Automaticcableequalizationupto300mforBelden8281•Opticalandelectrical270Mbpsoutputs• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU

cWDM or DWDM wavelength


DVB-ASI (EN50083-9)


RS422 Data I/O

RS422 Data I/O

1310/1550/CWDM

TX

RX

RX

TX

1310/1550/CWDM

RX1310/1550/CWDM

TX

ODU271

VS231-OE

VS701-OE

270MbpsNetwork


2-Channel SmPtE310-m to dvB-aSI Converter

vS192

Specialty

VeNTura

1.1

The VS192 is a SMPTe310-M to DVb-aSi converter with dual SMPTe310-M input and dual coaxial cable and single optical output for each channel.

it has two independent transmission channels which can accept SMPTe310-M transmission stream (19.39Mbps) and output DVb-aSi at 270Mbps. each channel can be configured as an electro-optical converter by the installation of a VPg SFP optical video laser module.

• Twoindependentchannelspercard• SMPTE310-MtoDVB-ASImapping•Opticalandelectrical270Mbpsoutputs• 188,204and208bytesupport• SmallFormfactorPluggable(SFP)opticsavailablein1310,1550oranyITU

cWDM or DWDM wavelength• ATSCandASIcompatible• Automaticrecognition,controlandconfigurationbyFCS183-AEMSand

FcS183-aeMS using SNMP or Web browser interface•Userdefinablealarmsbasedonpriority(major,minorornoalarm)• Slowstartcircuitonallpowerrailstominimizepowersupplyovershoot•NEBSLevel3compliant


dIgItaL vIdEOStandards 19.392Mbps (SMPTe310-M)

DVb-aSi (eN50083-9)

# Of inputs 2 (SMPTe310-M)

# Of Outputs 4 (coaxial cable) 2 (optical fiber)

connector bNc

impedance 75ohm

Data rate up to 270Mbpsequalization up tp 200m

OPtICaL tRaNSmIttER# Of Outputs 2

connector Sc/Pc

laser Type SFP

laser Wavelength 1310nm, 1550nm, cWDM, DWDM


LEd INdICatORS PWr backplane power status

cH1 SMPTe310-M activity on input

cH1 lSr SFP laser fault status

cH2 SMPTe310-M activity on input

cH2 lSr SFP laser fault/presence

CONFIguRatIONeach channel will have simultaneous optical and electrical outputs if a transmitter SFP is populated. enable “keep-alive” separately for each channel, controlled by element management or DiP switch, consisting of option to output continuous “comma” characters in absence of input SMPTe310-M signal.

ELEmENt maNagEmENtcompatible with the FcS183-aeMS and FcS183-aeMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls.

Status cH1/cH2 SMPTe310-M cH1/cH2 SFP laser transmitter cH1/cH2 SFP laser transmitter Fail controls set by switches/element management cH1/cH2 default output enabled by DiP switch with loss of SMPTe310-M input

controls cH1/cH2 default output enabled with loss of SMPTe310-M input

PHySICaL aNd ENvIRONmENtaLThe VS192 card resides in a single slot of a VS103 series chassis.

Voltage 5V and 3.3V chassis supply


Operating Temperature 0 °c/32°F to 50 °c/122°F

Storage Temperature -40 °c/-40°F to 85 °c/185°F


Fcc (Part 15, class a), c-TicK, and roHS

ORdERINg OPtIONSVS192-SFP SMPTe310-M to DVb-aSi converter

Specialty 1.1

VeNTura

vS192

DVB-ASI (1)DVB-ASI (2)

BroadcastStudio

SMPTE310-MATSC TS1

SMPTE310-MATSC TS2

DVB-ASI (1)DVB-ASI (2)VS192

Standard Application for VS192 ATSC Transport Stream (SMPTE310-M) to DVB-ASI Adapter

IPTV

Cable

Distribution to

Residential Customers

Cableor

IPTVor

SatelliteHeadend

270MbpsDVB-ASI

Transport NetworkOptical

or Telco


Break Out Panel, Frame and Cable

Specialty

VeNTura

1.1

VS150-Fr –1ru break out panel frame for one or two break out panels VS711

bP-Pl75 – break out panel for VS711. eight twin-ax Pl75 connectors

Db25/Pl-75-XX – cable between VS711db25 connector and Pl75 break out panel

XX is the cable length in feet. Not to exceed 10 feet.


1.1

VeNTura


Small Form-factor Pluggable Components

SFP OPtIONS

SFP Selection index

VeNTura

1.1

SFP components provide flexibility by enabling a Ventura card to support different line speeds or laser wavelengths at different times, or to change from simplex to duplex communications.

This document describes the functions provided by various SFP components, and the Ventura cards where they can be used.

Video Products group SFP part numbers indicate the part’s laser color or wavelength in the third part-number element. The fourth element should be interpreted as follows:S 1310 or 1550 Standard DFb SD Standard Distributed Feedback (not “Standard Definition”) SF Standard Fabrey-Perot c cWDM PiN Optimized for 270Mbps (SD-SDi) aPD Optimized for 1485Mbps (HD-SDi)

270mbps simplex video signals

available for:

VS192 VS201 VS501 VS621 VS701 ODu201

VS194 VS231 VS551 VS661 VS711 ODu271

VS721

Part number SFP-TV-1310-S

270 or 1485mbps simplex video signals

available for:

VS251 VS252 VS254

Part number SFP-TV-1310-SD


SFP Selection index 1.1

VeNTura

SFP OPtIONS

3gbps simplex signals

available for VS411 VS811

Part numbers:

SFP-T3-1310-S SFP-T3-1510-c SFP-T3-1550-S SFP-T3-1610-c

SFP-T3-1470-c SFP-T3-1530-c SFP-T3-1570-c SFP-r3-aPD

SFP-T3-1490-c SFP-T3-1550-c SFP-T3-1590-c

270mbps full duplex video signals

available for VS231-OO

Part numbers:

SFP-TrV-1310-PiN-SF SFP-TrV-1470-PiN-c SFP-TrV-1550-PiN-c

SFP-TrV-1550-PiN-SD SFP-TrV-1490-PiN-c SFP-TrV-1570-PiN-c

SFP-TrV-1510-PiN-c SFP-TrV-1590-PiN-c

SFP-TrV-1530-PiN-c SFP-TrV-1610-PiN-c

1485mbps full duplex video signals

available for VS251 VS252 VS254

Part numbers:

SFP-TrV-1310-aPD-SD SFP-TrV-1470-aPD-c SFP-TrV-1550-aPD-c

SFP-TrV-1550-aPD-SD SFP-TrV-1490-aPD-c SFP-TrV-1570-aPD-c

SFP-TrV-1510-aPD-c SFP-TrV-1590-aPD-c

SFP-TrV-1530-aPD-c SFP-TrV-1610-aPD-c

1gbps full duplex signals

available for VS722

Part numbers:

SFP-Tr1-1310-PiN-S SFP-Tr1-1510-PiN-c SFP-Tr1-1570-PiN-c

SFP-Tr1-1550-PiN-S SFP-Tr1-1530-PiN-c SFP-Tr1-1590-PiN-c

SFP-Tr1-1470-PiN-c SFP-Tr1-1550-PiN-c SFP-Tr1-1610-PiN-c

SFP-Tr1-1490-PiN-c

270 or 1485mbps simplex video signals

available for VS192 VS201 VS251 VS501 VS621 VS701 ODu201

VS194 VS231 VS252 VS551 VS661 VS711 ODu271

VS254 VS721

Part numbers:

SFP-TV-1470-c SFP-TV-1530-c SFP-TV-1570-c SFP-rV-PiN (270)

SFP-TV-1490-c SFP-TV-1550-c SFP-TV-1590-c SFP-rV-aPD (1485)

SFP-TV-1510-c SFP-TV-1550-SD

SFP-TV-1610-c


Monitoring and Test System

PluS

1.2


FCS1000


each input has a 270Mbps interface, allowing monitoring of either DVb-aSi signals or serial digital video signals. Service management is provided via an embedded Pc-based processor which provides a full Simple network management Protocol (SNMP) interface and Web browser display. all alarm conditions can be mapped into SNMP traps as well as individual gPi outputs for local alarms.




PluS






TS sync loss eDH–Missing

TS sync byte errors eDH–Packet error

PaT error active Picture (aP) eDH error here



PiD error Full Field (FF) error detected here









overload)














Netscape Navigator 7.2rS232 / eia232For linux System configuration (two connectors, front and rear access)









ORdERINg OPtIONSFcS1000 Focus monitoring and test system


FCS1000


Point-to-Point Fiber Optic Transport

PluS

1.2

multi-Format video & audio Fiber Optic Link with Jitter Removal

tv-1 PLuS

•NTSC/PAL/PAL-M/PAL-N,SDIorASI,plusaudiotransportinasingle1RUchassis

• Signal-to-noiseratiosinexcessof73dB• 12-bitanalogvideoencoding• SNMPElementManagementvia10-BaseTEthernetinterface• Lockedselectionofchosentariff• Exceeds250CShortHaulSpecifications• 4audiochannelsofinput:2AESsignalsof2channelseachor4analog

audio channels or 1 aeS signal and 2 analog audio channels• Selectablere-sampledornonre-sampledAESmodes• SupportsSMPTE272Masynchronous(resampled)and

synchronous (non-resampled)• 48kHzinsertion• RemovalofSDItimingandalignmentjitter• AutomaticEDHcorrectionand/orinsertion• Indicators/externalalarmsforlossofcarrier&audio


Point-to-Point Fiber Optic Transport 1.2

PluS

StaNdaRdS / COmPLIaNCEDiGitaL ViDeoSDi SMPTe 259M

SDTi SMPTe 305M

DVb-aSi eN50083-9

DiGitaL auDioaeS/ebu aeS-1992 & Dolby eembedding acc. to SMPTe 272M

aNaLOg vIdEO aNd audIONTSc exceeds rS250c short haul

NTSc exceeds Telcordia gr338-cOre

Pal exceeds iTu-r624-4 and ccir 567SNr in excess of 73db

COmPLIaNCEDesigned for NebS level 3 compliance

Safety ul,cSa, ce

eMc Fcc class a, ce

CONFIguRatION OF SERvICESerVice SeLection Switchlocation On TX front panel

Switch type rotary switch

Termination 75ohm termination switch for NTSc/Pal/Pal-M video (on/off)

Different combinations of video and audio can be set using either element Management or the front panel rotary switch settings as listed:

JIttER maNagEmENtJiTTer TOleraNce >4ui in the range of 10Hz to 10kHz

>0.25ui in the range of 1MHz to 5MHzJiTTer TraNSFer >20db attenuation at jitter frequency > 1kHz

PHySICaL INtERFaCESDigiTal ViDeO

Qty TX* 1 input plus 1 front panel monitor of input

Qty rX* 1 input plus 1 front panel monitor of input

connector type 75Ω bNc

Signal level 800mV (pk-pk)

return loss >15dbcable eQ >300m (belden 8281)

dIgItaL audIOQty TX* 2 aeS inputs

Qty rX* Duplicate outputs plus front panel monitors of outputs

connector Type 110Ω Phoenix balanced

aNaLOg vIdEOQty TX* 1 input plus 1 loop through plus 1 front

panel monitor of input

Qty rX* Duplicate outputs plus 1 front panel monitor of output

connector type 75Ω bNc floating

cMMr >60db @ 60Hz

return loss >30db

cable eQ >130m (belden 8281)

Quantization 12 bitsSignal-to-Weighted-random Noise ratio

(10kHz to 4.2 MHz) 73db

aNaLOg audIOQty TX* 4 inputs plus 4 front panel monitors of inputs

Qty rX* Duplicate outputs plus 4 front panel monitors of outputs

connector Type 600ohm Phoenix balancedlevel FS + 18dbu @ 600ohm

OPtICaLTX Output Power -2dbm (+/- 1db)

Wavelength 1310nm or cWDM

Optical receiver 1200nm to 1600nm

rX Sensitivity <-32dbm (10e-9 eDH)

Overload <–1dbm (10-9 eDH)

connectors Sc/Pc

NOTe: *Video can be either digital or analog. audio can be a total of two stereo’s with any mix of analog and digital or analog only or digital only.

aLaRm maNagEmENtFront paneL LeDSloss of video Yellow (or off)

SDi detect green (or off)

aSi detect green (or off)

NTSc/Pal detect green (or off)

loss of audio Yellow (or off)

an audio 1 detect green (or off)

an audio 2 detect green (or off)

aeS 1 detect green (or off)

aeS 2 detect green (or off)

Power/Fan red / green

laser alarm (TX) red (or off)

Optical alarm (rX) red / Yellow

alarm data is also accessible via a single Phoenix 3-pin male connector located on the rear of each chassis (TX and rX).

SNmP ELEmENt maNagEmENtSNMP element Management is provided via an ethernet interface (10-baseT) located on the rear of each chassis. This enables remote configuration and monitoring of alarms through a third party element management system or using VPg’s gui.

POWER / ENvIRONmENtaLVoltage 90-254Vac, 50Hz/50Hz

redundancy Dual PSu’s, each fused separately

Power TX/rX <20W

current 1.5amps

Operating temp 0 °c to +50 °c

Storage temp -40 °c to +80 °cHumidity 10% - 90% rH, non-condensing

PHySICaLDimensions 1ru rack mount (1.75”Hx 19”W x 14”D)Weight 10 lbs

ORdERINg OPtIONSTV-1 PluS TX: 1ru encoder/Transmitter

TV-1 PluS rX: 1ru receiver/Decoder link with Jitter removal

tv-1 PLuS


Point-to-Point Fiber Optic Transport

PluS

1.2

mPEg 2 Encoder and decoderNtSC/PaL/SdI + audio to aSI/dS3/100Baset Network Interfaces

tv-C PLuS

•NTSC/PALcompositeorSDIinputsandoutputs• EightindependentchannelsofanalogaudioorfourAES/EBU• VideoandaudiogainandcableEQadjustatallanalogI/Os• Supportspre-embeddedorlocallyembeddedaudio•DVB-ASI,DS3and10/100Base-Tinterfaces• Videoandaudiotestpatterngeneratorsforbuilt-inautomatedtestingof

equipment and link• FullVBIsupport• 4:2:2PatMLwithtransportstreamofupto50Mbps• 4:2:0supportwithtransportstreamsofupto25Mbps• SimpleGOPstructureconfigurationthroughelementmanagementGUI• Intuitivefrontpanel,easy-to-navigateLCDmenuwithpushbutton

controls• ACandDCpoweroptionswithoptionalredundancy


Point-to-Point Fiber Optic Transport 1.2

PluS




gOP adjustable

bit rate From 1,5Mbps to 50Mbps

Delay <140ms



ENCOdER INPutS – vIdEO anaLoGSystem specifications Pal/NTSc (iTu r-bT 470.rS250-c)

Number of inputs 1

impedance 75 ohm

Nominal level 1Vpp

bandwidth >5MHz


cable eq >100m


cable eq >250m belden 8281


an SDi pattern generator is also built into the encoder and can be switched in to the processing chain ahead of the compression engine thereby providing end-to-end quality testing of the entire compression, transport and decompression process.



impedance 600 ohm or Hi-Z






otheraudio may also be carried pre-embedded in the SDi stream. if configured to do so, this audio will be de-embedded and processed by the encoder. an on-board tone generator is also present that can be enabled for link and audio processing verification.

dECOdER OutPutS-vIdEO anaLoGSystem specifications Pal/NTSc (iTu r-bT 470.rS250-c)

Number of inputs 1

impedance 75 ohm

Nominal level 1Vpp

bandwidth >5MHz


cable eq >100m


dECOdE OutPutS – audIO anaLoGNumber of outputs up to 8 independent channels

connector type Phoenix 3-piin

impedance 600 ohm or lo-Z


DiGitaL System Specification aeS-3


impedance 110 ohm, balancedSample frequency 32, 44.1, 48Khz


e3 g.751

DS-3 g.751, c-bit Parity or M-Frame*






Storage temp –40 ˚c to +85 ˚c



ORdERINg INFORmatIONVPg TV-c PluS – eNc encoder

VPg TV-c PluS – Dec Decoder

tv-C PLuS


POWER SuPPLy SyStEm ac Dcinput voltage options 108-250Vac -48VDc

input ac frequencies 46-63Hz

Power consumption <30W per module (fully configured)additional features Power supplies are dual redundant,

load-sharing

ENvIRONmENtaL/COmPLIaNCEOperating temperature 0 °c to +50 °c

Storage temperature -10 °c to +70 °c

Humidity 20%–80%, non-condensing

eMc compliance Fcc, ceSafety compliance ul, cSa, ce

ELEmENt maNagEmENtOptional module can be attached to power supply (does not consume a cODec slot). This optional card supports two functional module slots. its rS-232 interface may be chained to support up to 32 chassis. aScii command-line interface is provided for ease of use. consult the VPg element Management System data sheet for further information on element management software capability.

advaNCEd ELEmENt maNagEmENtOptional module can be attached to power supply (does not consume a cODec slot). This optional card supports two functional module slots. its browser user interface allows for ease of use. Mib tables available for integration within SNMP compliant systems.

mONItORINgStatus, control, and alarm messages can be sent to the element management software. These messages include chassis-specific information: Status

Module present/absent Option(s) present/absent Module location/iD/serial number control Set module location/iD alarm Module fail Over-temperature

ORdERINg INFORmatIONcontact factory for ordering information.

2Ru modular universal Chassis

vPg6200

braVONeT

1.3

•Chassisdesignsupportstwomodulesforlowdensityapplications• Symmetricalarchitectureforslotindependence•Mid-planedesignenablesmix-and-matchofmodulesandconnections•Chassisacceptsanyaudio/videotransportmoduledesignedforthe

braVOnet™ product line• RedundantACorDCpowersupplysystemwithload-sharing• Built-infibermanagement• Elementmanagementmoduleismountedonthepowersupply,savinga

chassis slot

chassis and Power Supply


ELEmENt maNagEmENtOptional module can be attached to power supply (does not consume a cODec slot). its rS-232 interface may be chained to support up to 32 chassis. aScii command line interface is provided for ease of use. consult the VPg element Management System data sheet for further information on element management software capability.

advaNCEd ELEmENt maNagEmENtOptional module can be attached to power supply (does not consume a cODec slot). This optional card supports two functional module slots. its browser user interface allows for ease of use. Mib tables available for integration within SNMP compliant systems.

POWER SuPPLy SyStEm ac Dcinput voltage options 108-132Vac -24VDc

210-250Vac -48VDc

input ac frequencies 46-63Hz

Power consumption <30W per module (fully configured)

chassis capacity 180W, max.additional features Power supplies are dual-redundant, load-

sharing and hot-swappable





ORdERINg INFORmatIONchaSSiSVPg6000cH-03 5ru universal modular chassis with heat

deflector/fan assemblyVPg6000cH-05 5ru universal modular chassis with heat

deflector/fan assembly, For use with rJ-45 port aNM element manager.

POWER SuPPLIES aNd aCCESSORIESVpG6000ac power SuppLyVPg6000-120 115Vac, nom.

VPg6000-120-NM 115Vac + Net Man card, nom.

VPg6000-120-aNM 115Vac + Net Man card, nom.

VpG6000Dc power SuppLyVPg6000-48 -48VDc

VPg6000-48-NM -48VDc + Net Man card

VPg6000-48-aNM -48VDc + Net Man card

6000ch FiLLer paneLSVPg6000FP-1 i/O module one-slot filler panel kit

VPg6000FP-3 i/O module three-slot filler panel kit

VPg6000FP-PS PSu slot filler panel kit

1.3

braVONeT

5Ru modular universal Chassis System

vPg6000

• Symmetricalarchitectureforslotindependence•Mid-planedesignenablesmix-and-matchofmodulesandconnections•Chassisacceptsuptosixstandardaudio/videotransportmodulesdesigned

for the braVOnet™ product line• RedundantACorDCpowersupplysystemwithload-sharingandsupply

line redundancy• Elementmanagementmoduleismountedonthepowersupply,savinga

chassis slot•Chassis-mountedwavelengthdivisionmultiplexerfortwoorfour

wavelength systems

chassis and Power Supply

Power Modules Signal Modules

Backplane

ConnectorPanels

PowerInputs Signal I/Os

Power BusNetworkManagementBus

Network Management I/O

Net MgmtModule


FCS6000 aEmS (advanced Element management System)

FCS6000 aEmS

element Management

braVONeT

1.3

The FcS6000 aeMS is a linux-based element management card managing the braVOnet series cards. it acts as an SNMP agent for all cards in the shelf, controls and configures them using a Web browser and stores all the data in Flash (buffer) memory. The FcS6000 aeMS can be configured to control other cards using a remote and secure Telnet session.

The FcS6000 aeMS is located within a power supply slot and is unobtrusive in installing or uninstalling and acts automatically as soon as a new card is inserted in one of the slots in the shelf. it uses residual power to save the data and shuts down in a controlled manner.

• Automaticrecognition,controlandoperationoflinecards•WebbrowserandSNMPbasedmonitoringandcontrolling• RemotefirmwaredownloadusingremoteandsecureTelnetsession•DatetimestampedhistoryanddatarecordinginFlashmemory(buffer)• ChassisEnvironmentreportingusingtemperatureandfanspeedsensor

(leD indicators)•On-boardMicroprocessordetails:100MIPS,32-bitRISCbasedSoC,

external 128Mb flash and 64Mb SDraM• Safeoperationtransfertoupdatedfirmware(startsusingnewfirmware

after validation)• Linux-basedsystem•Userdefinablealarmsbasedonpriority(major,minorornoalarm)

RJ-45

IDC-50PC Lines

andAlarms

RS232 (x2)

Backplane

Connectorpanel

EthernetTransformer

PC and AlarmProcessing

Linux basedsingle boardcomputer

32-bit SoC100MIPS

Serial Ports

128Mb Flash

64Mb SDRAM

Power Conversion

DIPSwitch

FrontPanelLEDsand

RJ-45

ProgrammableGeneral Purpose I/O

FCS6000-AEMS

VPG Advanced Element Management System

GPIO (8 I/Os)

FANS

VPG6000 chassis

POWER

#2

POWER

#1

AEMS

SLOT

#1

SLOT

#2

SLOT

#3

SLOT

#4

SLOT

#5

SLOT

#6


element Management 1.3

braVONeT

FCS6000 aEmS

SNMP agent #1

SNMP agent #N

Web server #X

BRAVOnet

AEMS

SNMPagent

Network

SNMP manager #1

SNMP manager #N

Inform

Web manager #X

Web browserWeb browser

Get, Set

Inform

Get, Set

FCS6000 aEmS aS SNmP agENt a single FcS6000 aeMS acts as the proxy agent for up tp 9 Ventura line cards, 2 power supplies and the fan assembly placed in the VPg6000 chassis.

ELEmENt maNagEmENtFeatures SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls for braVOnet Series cards installed in a VPg6000 chassis. Some of the features are given below: -SNMP V2c ready -Telnet based remote and secure login -remote firmware downloads

aEmS SyStEm LOCatIONMechanically mounted on Power Supply #1 providing electrical connection to back plane of chassis. Does not consume a VPg6000 slot.

ENvIRONmENtaL/COmPLIaNCEOperating temperature 0 °c to + 50 °c

Storage temperature –10 °c to + 70 °c






SNMP element Management

connector rJ45 10/100 Mbps

No. of connectors Single access rear interface



Netscape Navigator 7.2 Mozilla Firefox 1.0 (Newer version supported)

RS232 / EIa232 (FOR LINuX SyStEm CONFIguRatION)connector Db9 (male)

No. of connectors 2baud rate up to 115200, 1 stop bit, 8 data bits,

no parity

gPIOTo interface Ventura chassis with user’s equipment

connector Micro-D 9-pinNo. of connectors 1, with 8 user configured,

TTl compatible i/O lines

ORdERINg OPtIONSFcS6000 aeMS advanced element Management System

card

gPiO cable FcS6000 aeMS general purpose input/output card connector cable


Monitoring and Test System1.3


FCS1000


each input has a 270Mbps interface, allowing monitoring of either DVb-aSi signals or serial digital video signals. Service management is provided via an embedded Pc-based processor which provides a full Simple network management Protocol (SNMP) interface and Web browser display. all alarm conditions can be mapped into SNMP traps as well as individual gPi outputs for local alarms.


braVONeT








TS sync loss eDH–missing

TS sync byte errors eDH–packet error

PaT error active picture (aP) eDH error here



PiD error Full field (FF) error detected here









overload)














Netscape Navigator 7.2rS232 / eia232For linux System configuration (two connectors, front and rear access)









ORdERINg OPtIONSFcS1000 Focus Monitoring and Test System


FCS1000

braVONeT


Stm-1/OC-3 dvB-aSI tS multiplexer – Bandwidth Optimizer

vPg9155

aSi Multiplexer/Network adapter

braVONeT

1.3

The VPg9155 MuX/DeMuX interoperates with other VPg products to form a layered approach to multiplexing and network interfacing ranging from e3/DS-3, Oc-3, to Oc-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. The VPg9155 manages, controls and protects each TS individually, enabling multiple customers to be served on a single 155Mbps or 140Mbps carrier.

•MultiplexesfourDVB-ASIinputsintooneOC-3/STM-1/STS-3(155Mbps)or e4 (140Mbps) output

•MaximizesASIpayloadcapacity(upto148Mbpsovera155Mbpsnetwork)• Inputscanbeswitchedtoanyoutput•UsedwithVPG6000/6200chassissystemsunderstandardorAEMS

(advanced element Management System)• Individualchannelbandwidthceilingprovidestotalcontrolovercapacity



content delivery


aSi Multiplexer/Network adapter 1.3

braVONeT

vPg9155

muX – INPut SIgNaLSinput signal type 270Mbps DVb-aSi–eN50083-9 or aSi*,

containing data from 800kbps up to 148Mbps

Maximum Payload e4 (140Mbps) 135Mbps Oc-3/STM-1 148Mbps

Number of inputs 4


input impedance 75 Ohm, with loop-through capability

Output impedance 75 Ohm, dual outputs

cable equalizer (max) 200m of belden 8281 cableaSi* Submux aSi Packets 192/208 bytes

muX – OutPut SIgNaLSOutput signal type 155Mbps–Oc-3c / STM-1

155Mbps–STS-3 (electrical) 140Mbps–e4-g.703 (electrical)

Number of outputs 1 x optical (STM-1 / Oc-3) plus 2 x electrical (STS-3 / e4)

input/output levels (elec) 800mV(pk-pk)

input impedance (elec) 75 Ohm, with loop-through capability

Output impedance (elec) 75 Ohm, dual outputsOptical 1310nm /1550nm single-mode

(launch power -3dbm min)

dEmuX – INPut SIgNaLSinput signal type 155Mbps–Oc-3c / STM-1

155Mbps–STS-3 (electrical) 140Mbps–e4-g.703

Number of inputs 2 x electrical (STS-3 / e4) plus 1 x optical (STM-1 / Oc-3)

Optical PiNFeT (-32bbm sensitivity)

dEmuX – OutPut SIgNaLSOutput signal type 270Mbps DVb-aSi–eN50083-9

Number of outputs 4 x 270Mbps plus 2 x loop-through STS-3 / e4



Output impedance 75 Ohm, dual outputscable equalizer (max) 200m of belden 8281 cable

POWER CONSumPtION/ ENvIRONmENtaLVPg9155TX/rX <20W (all options)

Operating temperature 0 °c to + 50 °c

Storage temperature -10 °c to + 70 °cHumidity 20%–80% rH, non-condensing

ELEmENt maNagEmENt / aLaRmS muX CONtROLS

input rate setting ch 1 to 4–input bit rate ceiling, set to a resolution of 0.1Mbps

rS Fec ch 1 to 4–add / don’t add

DVb checking ch 1 to 4–check for PiD, PaT, PMT, SeS or eS errors



Optical laser On or Off (where fitted)channel iD codes ch 1 to 4–Sets each TS’s conditional access

codes (2)

muX aLaRmS (SEt aS EItHER; NONE, maJOR OR mINOR)card fail card fault

laser fail Optical module fault

input loss ch 1 to 4–no input

input rate violation ch 1 to 4–allowable input bit rate exceeded

configuration error Wrong input type selectedDVb error channel 1 to 4–rS, PiD, PaT, PMT, SeS or eS

errors

dEmuX CONtROLSStandby protection switch enable or disable automatic network standby

switching

Optical loss only switch enable or disable switching to main electrical input when optical input is lost



Mode selected electrical or optical


Non-consec. error Network error thresholdchannel iD codes ch 1 to 4–Sets each TS’s conditional access

codes (2)

dEmuX aLaRmS (SEt aS EItHER; NONE, mINOR OR maJOR)

card fail card fault

Optical loss input power threshold too low


configuration error ch 1 to 4–error in data type or conditional access code

input errors ch 1 to 4–rate exceeds programmed thresholds


DVb error channel 1 to 4–rS, SeS errors

ORdERINg INFORmatIONVPg9155rX-00 aSi DeMux, STS-3

VPg9155rX-Oe aSi DeMux, STS-3 + STM-1/Oc-3c Pinfet receiver

VPg9155TX-00 aSi Mux, STS-3

VPg9155TX-SFP-eO aSi DeMux, STS-3 + STM-1/Oc-3c laserPlease refer to the SFP Options data sheet for SFP selection.


dS3/E3 dvB-aSI tS multiplexer – Bandwidth Optimizer

vPg9345


braVONeT

1.3

The VPg9345 MuX/DeMuX is one of many DVb-aSi and SDi networking products in the VPg9500 series. These products form a layered approach to multiplexing and network interfacing from e3/DS-3, Oc-3, to Oc-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. Designed with the service provider in mind, the VPg9345 manages, controls and protects each TS individually, enabling multiple customers to be served on a single 34Mbps or 45Mbps circuit.

•MultiplexesfourDVB-ASIinputsintooneDS3(45Mbps)orE3(34Mbps)output

•MaximizesASIpayloadcapacity(upto43.8Mbpsovera45Mbpsnetwork)• Inputscanbeswitchedtoanyoutput• Individualchannelbandwidthceilingprovidestotalcontrolovercapacity



content delivery



braVONeT

vPg9345

muX – INPut SIgNaLSinput signal type 270Mbps DVb-aSi–eN50083-9 or aSi*,

containing data from 800kbps up to 43.8Mbps

Maximum Payload DS3 43.8Mbps e3 33.9Mbps

Number of inputs 4




cable equalizer (max) 200m of belden 8281 cableaSi* Submux aSi Packets 192/208 bytes.

muX – OutPut SIgNaLSOutput signal type 45Mbps–DS3 (b3ZS)

34Mbps–e3 (HDb3)

Number of outputs 2 x electrical plus 1 x optical (where fitted)



Output impedance (elec) 75 Ohm, dual outputsOptical 1310nm / 1550nm single-mode

(launch power -3dbm min) cWDM or DWDM

dEmuX – INPut SIgNaLSinput signal type 45Mbps–DS3 (b3ZS)

34Mbps–e3 (HDb3)

Number of inputs 2 x electrical plus 1 x optical (where fitted)

Optical (optional) PiNFeT (-32dbm sensitivity)

dEmuX – OutPut SIgNaLSOutput signal type 270Mbps DVb-aSi–eN50083-9

Number of outputs 4 x 270Mbps plus 2 x loop-through DS3 / e3



Output impedance 75 Ohm, dual outputscable equalizer (max) 200m of belden 8281 cable

POWER CONSumPtION/ENvIRONmENtaLVPg9345TX/rX <20W (all options)

Operating temperature 0 °c to + 50 °c

Storage temperature -10 °c to + 70 °cHumidity 20%–80% rH, non-condensing

ELEmENt maNagEmENt/aLaRmS muX CONtROLS







codes (2)






errors

dEmuX CONtROLSStandby protection switch enable or disable automatic network standby

switching







codes (2)









ORdERINg INFORmatIONcontact factory for ordering information.


SdI/dvB-aSI tS multiplexer – Sub-multiplexer/Bandwidth Optimizer

vPg9500


braVONeT

1.3

The VPg9500 MuX/DeMuX interoperates with other VPg products to form a layered approach to multiplexing and network interfacing ranging from e3/DS3, Oc-3 to Oc-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. The VPg9500 can be used as a companion card with the other family members performing the function of sub-multiplexing for aSi bandwidth optimizing or multiplexing into SDTi for adapting to fiber metropolitan or SDi long-distance networks.

•MultiplexesfourDVB-ASIinputsintoone270MbpsASIorSDTI(SMPTE305) output

•MainlyusedasaSub-MuxtoincreasethenumberofTSinputstoVPg9345, VPg9155 or VPg9555

• Inputscanbeswitchedtoanyoutput•UsedwithVPG6000/6200chassisunderstandardorAEMS(Advanced

element Management System)• EachinputTScanbeupto178Mbps• Individualchannelbandwidthceilingprovidestotalcontrolovercapacity

available to client (to a resolution of 0.1Mbps per TS)•DVBvaliditycheck(PID,PAT,PMT,ESandSES)• Reed-SolomonFECcanbeappliedtoeachASITSforreliableMPEG-2

transmission• Reed-Solomoncheckingforeachinputandoutput• EachinputTSisassignedconditionalaccesscodes(2layers)forsecure

content delivery



braVONeT

vPg9500

muX – INPut SIgNaLSinput signal type 270Mbps DVb-aSi–eN50083-9, or aSi*,


Maximum Payload SDTi 178 aSi* 178

Number of inputs 4





muX –OutPut SIgNaLSOutput signal type 270Mbps aSi*, or SDTi plus optical (where

fitted) containing data up to 179.5Mbps

Number of Outputs 2 x electrical plus 1 x optical (where fitted)



Output impedance (elec) 75 Ohm, dual outputs

Optical 1310nm /1550nm single mode (launch power -3dbm min)

aSi* Submux aSi Packets 192/208 bytes

dEmuX – INPut SIgNaLSinput signal type 270Mbps aSi*, or SDTi plus optical

(where fitted)

Number of inputs 2 x electrical plus 1 x optical (where fitted)Optical PiNFeT (-32bbm sensitivity)

dEmuX – OutPut SIgNaLSOutput signal type 270Mbps DVb-aSi

Number of outputs 4 x 270Mbps plus 2 x 270Mbps input loop-through SDTi







Storage temperature -10 °c to +70 °cHumidity 20%–80% rH, non-condensing






Output mode Selects aSi or SDTi


codes (2)






errors

dEmuX CONtROLSStandby protection switch enable or disable automatic network

standby switching



input mode Selects aSi or SDTi




codes (2)







Standby input selected Standby 270Mbps input is being used by DeMuX


ORdERINg INFORmatIONVPg-9500-TX aSi SubMux card

VPg-9500-rX aSi SubDeMux card


OC-12/Stm-4 SdI/SdtI/dvB-aSI atm multiplexer

vPg9000

aSi/SDi 270 Multiplexer/Network adapter

braVONeT

1.3

The VPg9000 622Mbps SDH/SONeT Video Multiplexer is a time division multiplexer that has been engineered to combine two 270Mbps video tributary signals onto an Oc-12/STM-4 carrier. each 270Mbps tributary may be formatted as an SDi, SDTi or DVb-aSi signal, enabling the simultaneous transport of multiple compressed and uncompressed digital video signals.

•DesignedfortransportingSDIvideosignalsoveraSONET/SDHinfrastructure

•Multiplexestwouncompressed270Mbps• SMPTE259M/ITU-R601feedsinto622Mbps• ATMcompatibletransportinterface• Tributaryinterfacesallowremotefiber-opticornetworkconnectiontothe

backbone multiplexer• AccommodatesallVPGaudioandformatconversionmodules•OptionalwavelengthmultiplexingpermitsuptofourSDIsignalsonthe

same fiber• AdvancedElementManagementSystemwithEDHsupport

MultiplexerProcessing and

Output Formatting OC-12/STM-4

LaserTX

Line 1

Line 2

OC-12C/STM-4

StreamProcessing

VPG9000 TX DVB-ASI Multi-Channel DS3 / E3 Telecom Adapter

DVB-ASISource

DVB-ASISource

StreamProcessing

StreamProcessing

STS-12C(Electrical)

DemultiplexerProcessing and Output DecodingOC-12/STM-4

PINFETRX

Line 1 (Main)

Line 2 (Standby)

OC-12C/STM-4(Optical)

VPG9000 RX DVB-ASI Multi-Channel DS3 / E3 Telecom Adapter

DVB-ASIReceiverDVB-ASIReceiver

STS-12C(Electrical)


aSi/SDi 270 Multiplexer/Network adapter 1.3

braVONeT

vPg9000

gENERaLinput signal types 270Mbps SDi (SMPTe 259M),

SDTi (SMPTe 305M), or DVb-aSi (eN50083-9)

No. of channels Two

270mBpS eLectricaL (coaXiaL)input/output levels 800 mVpp, with loopthrough capability

input impedance 75 Ohm

Output impedance 75 Ohm, dual outputscable equalizer max. lth. 300m of belden 8281 cable

270mBpS opticaLWavelength 1310nm or 1550nm

coding Scrambled or non-scrambled

Fiber type Singlemode

launched power -3dbm ±1db

received sensitivity -32dbm, typ.Maximum input –1dbm for 10-9 ber

eXternaL network reFerence cLockconsult factory for options.

LINkData rate 622.08Mbps

Physical interfaces electrical STS-12c compliantOptical Oc-12c/STM-4 compliant

POWER CONSumPtIONVPg9000TX <25WOptical Option <1W per module



Humidity 20%–80% rH, non-condensing

eMc compliance Fcc, ce

Safety compliance ul, cSa, ce

advaNCEd ELEmENt maNagEmENtStatus, control, and alarm messages can be sent to the element management software. These messages include:

VPg9000TX Status Module present/absent Option(s) present/absent Module location/iD/serial number control Set module location/iD laser enable enable/disable scrambling alarm loss of video input Video errors (eDH support) Module fail Optical source fault/bias deviation (link) Optical power fault/low light fault (SDi)

VPg9000rX Status Module present/absent Option(s) present/absent Module location/iD/serial number control Set module location/iD laser enable enable/disable descrambling alarm loss of link Video errors (eDH support) Module fail Optical power fault/low light fault (link)Optical source fault/bias deviation (SDi)

ORdERINg INFORmatIONVPg9000TX-00-21 aTM mux card, Oc-12/STM-4

VPg9000rX-00-20 aTM demux card, Oc-12/STM-4


SdI/dvB-aSI tS multiplexer – Sub-multiplexer/Bandwidth Optimizer

vPg9500

aSi/SDi 270 Multiplexer/Network adapter

braVONeT

1.3

The VPg9500 MuX/DeMuX interoperates with other VPg products to form a layered approach to multiplexing and network interfacing ranging from e3/DS3, Oc-3 to Oc-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. The VPg9500 can be used as a companion card with the other family members performing the function of sub-multiplexing for aSi bandwidth optimizing or multiplexing into SDTi for adapting to fiber metropolitan or SDi long-distance networks.

•MultiplexesfourDVB-ASIinputsintoone270MbpsASIorSDTI(SMPTE305) output

•MainlyusedasaSub-MuxtoincreasethenumberofTSinputstoVPg9345, VPg9155 or VPg9555

• Inputscanbeswitchedtoanyoutput•UsedwithVPG6000/6200chassisunderstandardorAEMS(Advanced

element Management System)• EachinputTScanbeupto178Mbps• Individualchannelbandwidthceilingprovidestotalcontrolovercapacity

available to client (to a resolution of 0.1Mbps per TS)•DVBvaliditycheck(PID,PAT,PMT,ESandSES)• Reed-SolomonFECcanbeappliedtoeachASITSforreliableMPEG-2

transmission• Reed-Solomoncheckingforeachinputandoutput• EachinputTSisassignedconditionalaccesscodes(2layers)forsecure

content delivery


aSi/SDi 270 Multiplexer/Network adapter 1.3

braVONeT

vPg9500

muX – INPut SIgNaLSinput signal type 270Mbps DVb-aSi–eN50083-9, or aSi*,


Maximum Payload SDTi 178 aSi* 178

Number of inputs 4




cable equalizer (max) 200m of belden 8281 cableaSi* Submux aSi Packets192/208 bytes

muX – OutPut SIgNaLSOutput signal type 270Mbps aSi*, or SDTi plus optical (where

fitted) containing data up to 179.5Mbps

Number of Outputs 2 x electrical plus 1 x optical (where fitted)



Output impedance (elec) 75 Ohm, dual outputs

Optical 1310nm /1550nm single mode (launch power -3dbm min)

aSi* Submux aSi Packets 192/208 bytes

dEmuX – INPut SIgNaLSinput signal type 270Mbps aSi*, or SDTi plus optical

(where fitted)

Number of inputs 2 x electrical plus 1 x optical (where fitted)Optical PiNFeT (-32bbm sensitivity)

dEmuX – OutPut SIgNaLSOutput signal type 270Mbps DVb-aSi

Number of outputs 4 x 270Mbps plus 2 x 270Mbps input loop-through SDTi







Storage temperature -10 °c to +70 °cHumidity 20%–80% rH, non-condensing






Output mode Selects aSi or SDTi


codes (2)






errors

dEmuX CONtROLSStandby protection switch enable or disable automatic network

standby switching



input mode Selects aSi or SDTi



Non-consec. error Network error thresholdchannel iD codes ch 1 to 4-–Sets each TS’s conditional access

codes (2)







Standby input selected Standby 270Mbps input is being used by DeMuX


ORdERINg INFORmatIONVPg-9500-TX aSi SubMux card

VPg-9500-rX aSi SubDeMux card


aSI/SdI dual-Channel Intelligent Slipless Switch

vPg7700

aSi/SDi Protection Switching

using patented techniques, the VPg7700 aSi/SDi Dual-channel intelligent Slipless Switch provides full transport stream protection for digital television networks.

With comprehensive Tr 101 290 real-time analysis, the quality of both the primary and backup transport streams is available for any switching decisions. by performing feed-forward switching, TS packet alignment is guaranteed throughout the switching process. unique patented packet and clock synthesis with programmable duration can also be enabled to bridge disruptions to both transport streams.

• TwofullyindependentDVB-ASI/SDIswitchespercard.•Dualinputsanddualoutputsoneachswitch.• Patented,packetsliplessswitchingtechniqueswithlookaheadbufferingto

maintain TS synchronization. •Discontinuityflagsetonswitching.• ByteandpacketstuffedASImodessupported.• AccommodatesanysizeTSbetween850Kbpsand160Mbps.• 75ohmcoaxialinterfacesandtwobufferedmonitorpointsperswitch.• IncomingstreamanalysiswithRSForwardErrorCorrectionverification.• 188to204bytepacketconversioncapability.• Comprehensiveswitchingalgorithmswith1second,1minuteand10

minute windows. • Proactiveswitchingonlossofsignal,TSsynclossanderrorconditions.• Reactiveswitchingonlongtermerrorconditions.• Patentedpacketandclocksynthesisforbridgingdiscontinuoustraffic.

braVONeT

1.3


aSi/SDi Protection Switching

vPg7700

OPERatION The VPg7700 switch is used to provide intelligent slipless switching of aSi transport stream packets. it provides unequalled network redundancy protection and is almost insensitive to differential delays between paths as it operates to ensure packet alignment and continuity. in the single-redundant mode of operation, the VPg7700 contains two fully independent channels that can be used to protect two individual transport streams. in the dual-redundant mode, the product can be cross-connected with another VPg7700 to provide both hardware and power feed redundancy. in both modes of operation, the element management interface is used to select the switching criteria, which can extend from simple loss of signal to profile switching based on Tr 101 290 analysis. Packet synthesis can be enabled to maintain packet continuity during disruptions to both streams, which is not uncommon if the transport stream is switched prior to entering the transport network. The packet synthesis duration is programmable up to ten seconds.

SPECIFICatIONSTheVPG7700supportstwoseparatemodesofoperation;DVB-ASImodeand SDi mode.

DVB-aSi SDiinterface eN50083-9 SMPTe 259MMeasurement Tr 101 290 SMPTe rP 165

aLaRm CONdItIONSFiXeD aLarmSDVB-aSi moDe SDi moDe loss of signal loss of signal communication fail communication fail

card fail card fail alternative input selected alternative input selectedconfiguration error configuration errorproGrammaBLe aLarmSDVB-aSi moDe SDi moDeDVb errors TrS errors DVb SeS 1 minute eDH errors DVb SeS 10 minute eDa errors rS errors iDa errors continuity error Freeze frame linearity error audio missing PiD profile mismatch audio silence

aLaRm CONdItIONINgeach alarm condition can be programmed to different levels of severity and switching can be withheld until a preprogrammed persistence of an alarm condition is reached. in this way, chattering and unwanted switching conditions are avoided.

Severity levels Disabled, log only, information, warning, minor, major, critical

Persistence Persistence may be set to any value and is used to filter unwanted short-duration alarms.

FRONt PaNELinDicatorS – LeDS· Power present (Yellow)

· card fail (red)

· channel present 1a (green)

· channel present 1b (green)

· channel present 2a (green)

· channel present 2b (green)

· alarm 1a (red)

· alarm 1b (red)

· alarm 2a (red)· alarm 2b (red)monitor pointSFour buffered 75-ohm SMc connectors are provided on the front panel to monitor the main and alternate outputs of each channel.

ELEmENt maNagEmENtThe VS7700 is compatible with the VPg6000 braVOnet™ aeMS (advanced element Management System). This is a Web browser based monitoring and control system with comprehensive SNMP support.

the FoLLowinG can Be controLLeD Via the network manaGement interFace:configuration aSi/SDi

Switching mode of operation Force 188 output PiD profile auto reversion time Packet synthesis timeout

alarms Priority level (see alarm severity table) Persistence time Hold time

These are all programmed through the Web page. Their values depend on the network configuration and conditions. Preset values can be loaded from a configuration file. all configurations can be changed through the “edit config” Web page, and its associated pages.

hiStory LoGGinGa deep history log of all events is maintained and accessible through the History Web page. The alarm Statistics page provides “errored seconds” analysis for each alarm event.

Snmp compatiBiLityan SNMP Mib conforming to SNMP V2 and V3 is supported through the VPg aeMS management platform.

ORdERINg OPtIONSThe VPg7700 is supplied with a connector panel. There are no specific configurations of this product. The ordering code is VPg7700 aSi/SDi dual channel slipless switch.

1.3

braVONeT

VikinX compact

Since the conception of Network electronics, we have provided affordable, compact, energy efficient, high quality products. This philosophy is very much alive, and we continue to bring excellent products with advanced design into the market.

Our product portfolios, VikinX and Flashlink, have set new industry standards and have achieved many awards for modern design and excellent engineering year after year.

vIkINXThe VikinX products represent our routing range and have three different entry points ...

The industry standard VikinX Compact series, for over 10 years, is the router for both entry level and broadcasters.

The VikinX Sublime series provides the next generation technologies including ethernet control, 3gbps Single link support for 1080P High Definition TV, and ultra low power consumption. VikinX Sublime is the router for all users appreciating these features – including top end broadcasters.

... and the flexible VikinX Modular series, joined by the newest member, the 256x256 High Definition router.

Alltheseseriesinterconnect;sharingsoftwareconfiguration,control and monitoring applications, providing legacy and growth paths appreciated by both our new and existing customers.

Network electronics is proud of our ability to offer a complete range of routing solutions. Network electronics is a strong, trusted partner to our customers around the world.

The concept

broadcast and Telco formats covered in our routing products:3gHD, HD, SDi, aeS, analog Video & audio, Time code, rS-422, 34/45 Mbps, 140-155 Mbits and g703.

VikinX Modular

VikinX Sublime


FLaSHLINkThe Flashlink product range covers all signal processing and distribution equipment for the fiberoptic domain and comes with several innovative housing solutions.

The processing and distribution products are capturing market prominence with a complete line of products that will do the job that they are intended for, simply and straight forward and maintenance free with a technical passion that makes this high performance range stand out from the crowd.

it could be simply video or audio distribution or change over switching or frame synchronizers, what ever your product desires are we can satisfy your wishes.

Flashlink is known for being well engineered, simple for the user and ultra reliable with a cost performance advantage.

For many years the Flashlink product range has led the industry and has become the industry standard for fiber transport systems in the broadcast and video transport arenas.

From a simple one channel fiber system up to 40 channels of uncompressed data or broadcast signal formats on one fiber, Flashlink is known world wide for its innovative transport system and control system possibilities including SNMP on all products.

Synchronisation, Delay, Multiplexing, converters, Distribution amplifiers, change over switching

HD-SDi, SD-SDi, aeS, analog Video and audio, 10/100/1000Mbps ethernet, rS-422, gPiO, l-band, TDM, SDi Time Division Multiplexers, SDH/SONeT up to STM16/Oc-48, DVb-aSi, fiber channel, iP Transport systems for Video over iP, 3r regeneration, cWDM and DWDM system platforms and many others

rack mount, studio facilities, Ob vans:Flashlink Fr-2ru 19” frame for up to 10 modules and dual power supply

Mobile use, outside broadcast (Ob), events MOT-bOX, lightweight rugged housing for Flashlink Fr-2ru frame

Stand-alone: N-bOX single module frame

SIgNaL FORmatS SuPPORtEd By FLaSHLINk…•UncompressedSD-SDI/HD-SDI/3G-SDI•NTSC/PAL• Analogaudioandvideo• AESandMADI• E4,STM1-16,OC3-48•DVB-ASI,M2S(Divicom),SMPTE310M,SDTI• RS-422,GPI/GPO• 10/100/1000MbpsEthernet• FiberChannel• AnalogL-bandsignals

FuNCtIONS INCLudEd…• SD-SDI/HD-SDIandAESembedding/de-embeddingwithanalog

signal support• SD-SDIandHD-SDI2x1changeovermodules•Distributionamplifiersinallflavours•HD-SDdown-conversion• ElectricaltoOpticalandOpticaltoElectricalmediaconversion• Fiberopticalsignaldistributionandautomaticprotection

switching•Opticalmultiplexing,WDM,CWDMandDWDM• 3R-regenerationofopticalsignalswithwavelengthscheme

swapping• Electricalmultiplexing,TDM•AEStoanalogaudioandanalogaudiotoAESconversion• SDItoNTSC/PALencoding,10-bitand8-bitversion•NTSC/PALtoSDIdecoding• Lineandframesynchronization• SystemControllerwithwebandSNMPsupport

Signal Transport, Processing and Distribution

network-electronics.com |

Flashlink Overview

SigNal TraNSPOrT, PrOceSSiNg aND DiSTribuTiON

105

Feature Function Benefit

Multiformat broadcast, Telecom and Datacom

platform

Dedicated modules for different signals

formats, the Mr-Tr range supports all

formats optically

Offer one or more of these services with

potential future expansion with the same

platform

Single mode and multi mode compatible Multi mode fiber on receivers allow for use

with single or multi mode fibers

install new fiber cables or use existing

infrastructure

gYDa-Sc System controller with TcP/iP web

interface

Dynamic web site generation by system

controller gives access to remotely control

and configure system

use web interface for full access to installed

system from control site, no special software

needed

all Flashlink modules have Simple Network

Management Protocol support via gYDa-Sc

gYDa-Sc operates as an SNMP agent easy integration into larger control systems

using SNMP

extensive monitoring possibilities gPi output, front card leDs and rS-422

control

Tailor monitoring to existing studio needs

Hot-swappable architecture change modules without powering down

system

little or no down-time on running services

Modular and easily expandable system 10 slots per Frame, hot swappable, add

modules without powering down on-air

frames

grow with the system, no need for huge

initial investments

Supports pathological video patterns without

scrambling

extremely good low frequency response robust signal transport system

any wavelength scheme, 1310nm and 1550nm,

cWDM and DWDM

add the number of wavelengths needed

per fiber according to current needs

Flexible system design, tailored for specific

customer needs

Very compact 2ru rack mount solution industry leading rack size compactness Saves rack space with increased packing

density

Dual redundant power supply load sharing ensures working frame as

long as more than one of the two powers

operate normally

lower risk for power loss during critical

operations

ac and/or Dc power supply ac and/or Dc operation Maximum power redundancy, flexible power

sources

extremely low power consumption No fans needed, better reliability less maintenance, reduced operating cost,

longer lifetime

See for yourself how you can benefit from the extensive features of the Flashlink system:

106 | network-electronics.com106

10 mOduLE SLOtS• Mixandmatchmodulesaccordingtoyourneeds

• Allcablingattherear

• Afullyfunctioning16-channelCWDMsysteminonly2RUwith

dual converters

EaSy CONFIguRatION• Shorttimetogetonair

NO FaNS• Lowpowerconsumptionmeansthatwehaveremovedthemost

commonsinglepointoffailure;thefans

tWO POWER SuPPLy SLOtS• Singleorredundant,loadsharingpowersupply,AC,DCoramix

HOt-SWaPPaBLE aRCHItECtuRE• Hot-swappingofmodulesandpowersuppliesaccessiblefromfront

means short replacement time

• Nore-cablingneededformodulereplacement/

re-configuration

• Noelectricaldisturbanceonothermodulesduringhot-swapping,

particularly important in on air situations

COmPREHENSIvE CONtROL aNd mONItORINg • StatusmonitoringthroughfrontLEDs,GPIand

rS-422 simultaneously

• Addresssettingofeachframeallowsforsimultaneouscontrolof8

frames

• SNMP–SimpleNetworkManagementProtocolsupportforuse

with larger Network Management Systems is standard on all

modules

• GYDA-SCSystemControllerprovideswebinterface/SNMPforall

modules connected to the controller at a remote location

• Remoteconfigurationandmonitoringsavestimeandtrouble-

shooting time

Flashlink 2ru Frame– Compact and comprehensive

Flashlink Frame

ac power ac power supply module 100–260 Vac (PWr-ac15/15/5/5V)

Dc power (optional) Dc power supply module 36–72 VDc (PWr-Dc15/15/5/5V)

redundant power (optional)

Dimensions 483 x 88 x 178 mm (19”, 2ru)

card slots 10

Power supply slots (reserved) 2

internal voltages +5V, +15V, –15VWeight approx. 3 kg fully populated dependent on

module types

FR-2Ru-10-2

Flashlink Frame

FR-2Ru-10-2

Power Supply for Flashlink Frame

internal power supplies are available in both ac- and Dc-versions. Mixed ac/Dc operation is possible, when both power supply slots are used for redundancy. an leD in the front shows if the power is active. The internal powers can deliver 30W at ±5V, 15W at +15V and 15W at –15V at the same time.

PWR-aC15/15/5/5vinput voltage 100-260Vac

Output voltages ±5V, ±15V Dc

PWR-dC15/15/5/5vinput voltage 36-72VDcOutput voltages ±5V, ±15V Dc

Flashlink Housing


2.1


N-bOX 2.1

FlaSHliNK HOuSiNgS

N-bOX is an ultra compact, ruggedized and cost effective

housing for the Flashlink modules.

The same Flashlink modules and backplanes can

be used in the Flashlink Fr-2ru-10-2 frame and

in N-bOX. This interchange ability allows for easy

migration and system expansion from N-bOX to

the Flashlink

Fr-2ru-10-2 frame in case of future expansion

needs.

all Flashlink modules have the same feature set regardless of housing.

1ru shelf for up to 4 x N-bOX, including 3 front panels for empty

slots

1Ru Shelf

N-BOX-SH1Ru

Mounting plate for N-bOX, allows wall, on-table, under-table

mounting, complete with screw set

mounting Plate

N-BOX-PL1

angled mounting plate for N-bOX, allows wall, on-table, under-table

mounting, complete set with 2 plates and screws

angled mounting Plate

N-BOX-PL2

interconnecting plate for N-bOX, allows stapling of N-bOXes,

complete set with 2 plates and screws

Interconnecting Plate

N-BOX-PL3

Distribution amplifiersembedders / De-embeddersVideo convertersaudio convertersSynchronisation Modulesautomatic changeover ModuleseO and Oe convertersDatacom interfacesHD Downconverters


mOt-BOX is the most compact and lightweight mobile transport

enclosure available.

MOT-bOX houses one Flashlink 2ru frame with modules for optical

transport, signal processing and distribution.

RuggEdIzEd dESIgNWith its ruggedized design it is the logical choice for all mission-

critical mobile and outside broadcast applications.

IdEaL FOR OutSIdE BROadCaSt EvENtSNetwork electronics is known as the supplier of routing and signal

transport solutions to all major sports events in the world. events like

the Olympic games, FiFa World cup, and Skiing World cups have

been broadcasted to millions of viewers with Network electronics

equipment. The MOT-bOX is the ideal solution for coverage of these

applications and any other outside broadcast event.

mINImISEd SPaRES HOLdINgThe MOT-bOX can be pre-configured to meet specific requirements,

and also shared among several vans for e.g. news gathering,

substantially lowering the investment cost.

Since the modules of the mobile system are exactly the same as you

use in the studio, the number of spares can be held at a minimum.

LIgHtWEIgHtThe MOT-bOX design with rugged connectors like Xlrs for audio and

a hermaphroditic (both male and female) fiber connector holding

4 fibers allows for use in harsh environment. The low weight gives

maximum mobility, two person lift is a thing from the past. One

person can easily carry the MOT-bOX alone. in a fully loaded van

close to exceeding weight limits, the low weight of the MOT-bOX will

be appreciated.

ROBuSt FIBER CaBLEThe Mil specified tactile fiber with hermaphroditic connectors has 4

fibers and can be delivered in lengths of 150m, 250m or 500m. The

extremely robust fiber cable ensures a reliable fiber connection.

muLtIPLE FIBERS, muLtIPLE SIgNaLSThe 4 fibers allow uni- or bi-directional video with associated audio

and rS-422 signals. by utilising TDM (electrical multiplexing) and

cWDM (optical multiplexing) the number of signals can be increased

to meet specific demands.

HD-SDi, SD-SDi or analog video, the choice is yours, MOT-bOX is the

ideal companion for mobile and outside broadcast productions.

mOt-BOX• Themostcompactandlightweight3RUmobiletransporthousing

available

• HoldsaFlashlink2RUframe

• ACandDCpowersupplyoption

• SupportsthefullsetofFlashlinkmodules

• Ruggedizedconnectorbackplanesfortoughuse

• MILspecifiedtactilefibercablereelswith4fibers(optional)

• BreakoutpanelstovariousconnectorslikeSC/PCorE2000

available

• Only12kgfullypopulatedwithredundantpowersupply

MOT-bOX

FlaSHliNK HOuSiNgS

2.1

Flashlink MOT-bOX– Extremely lightweight mobile transport enclosure


Fiber hermaphroditicexpanded beam connector

The optical fiber is fully protected behind a hard-coated

expanded beam lens and forms a no-contact connection.

Dirt and contamination can be simply cleaned

with a cloth (or your shirt sleeve)

MOT-bOX 2.1

FlaSHliNK HOuSiNgS

mOt-BOX

ac Power PWr-ac15/15/5/5V

ac power supply module 100-260 Vac

Dc Power (optional) PWr-Dc15/15/5/5V

Dc power supply module 36-72 VDc

Dimensions (WxDxH) 530 x 570 x 215 mm with front and rear covers. 530 x 425 x 215 mm w/o front and rear covers

Weight including PSu and 10 modules: <12 kg

card slots 10

Power Supply slots 2internal voltages +5V, -5V, +15V, -15V

mOt-BOX

mOt-BOX Backplane modulesMb-Fr-1ru

1ru frame with front mounted 4-Fiber expanded beam hermaphroditic Mil connector, rear panel with 4 x Sc-Pc connector. Space for up to 5 Mil fiber connectors.

Mb-Mil-4Sc Mil connector to 4xSc breakout for use

with Mb-Fr-1ru

Mb-bP-00 blindplate

Mb-bP-01 backplane for aDc-aeS

Mb-bP-02 backplane for Dac-aeS, Da-aa or Da-aeS

Mb-bP-03 backplane for SDi-Oe, SDi-eO, HD-Oe or

HD-eO

Mb-bP-04 backplane for Da-SDi ,Da-SDi-Nrc,

Da-HDSDi, aDc-SDi, aDc-SDi-cc,

Dac-SDi, SDi-TD

Mb-bP-05 backplane for aV-MuX

Mb-bP-06 backplane for aaV-MuX or aVa-MuX

Mb-bP-07 backplane for aV-DMuX, aaV-DMuX,

aVa-DMuX or aV-HD/SD-XMuX

Mb-bP-08 backplane for D422-Mg (rS-422)

Mb-bP-09 backplane for D422-MD (gPi in and out)

Mb-bP-10 backplane with 4x Sc-Pc fiber connector

including 4x0.5m fiber patch cord

Mb-bP-11 backplane with 4x e2000/Pc fiber

connector including 4x0.5m fiber patch

cord

mOt-BOX Reels with cables

Singlemode tactical 4-Fiber cable terminated with expanded beam hermaphroditic Mil fiber connector

Mb-reel-150 reel with 150m



mOt-BOXAC power

DC power

Fiber connector

Ethernet


gYDa-Sc

• Controlsupto8Flashlinkframes

• 10/100Base-TEthernetinterfacewithTCP/IPprotocol

• StandardwebbrowserstoconfigureandmonitorFlashlink.

• Log-filesarestoredoncompactflashcard

• User-friendlygraphicaluserinterface

• SupportforVikinXCompactandVikinXSublimeroutercontrol

• SNMPsystemwithalarmandtrapfilteringimplementedforall

modules

• FTPserviceforonlineupgrades

• Noannuallicencefee

• VisualizesystemconditioninVisiodrawings(option)

and many more ...

Web and SNMP based control, Monitoring and configuration – Element manager for Flashlink

System controller for Flashlink


2.1

SyStEmcPu 400MHz intel PXa255

StrongarM

Memory 64Mb SDraM 8Mb Flash

ELECtRICaL INtERFaCES

2 x rS-232 or rS-422 control ports on Db9F conforming to ibM Pc (rS-232) or SMTPe 207M (rS-422)

1 x 10baseT/100base-TX fast ethernet, full duplex capable

POWER CONSumPtION

+5V Dc / 3W

example of web interface in gYDa-Sc


REmOtE mONItORINg aNd CONtROLuse internet technology to connect remote sites together, enabling

complete control of all your Flashlink equipment from all locations.

Sending technicians to remote locations for error tracing becomes

a thing of the past. error correction is faster, saving money and

providing better availability to the end user.

ONLINE mONItORINggYDa-Sc will continuously monitor the system for all vital

parameters, like signal quality and power supply voltages. The web

page is automatically updated with the latest information.

CONFIguRatIONall cards can be configured through gYDa-Sc. Some cards have

advanced configuration possibilities which are straight-forward with

gYDa-Sc.

The configuration is stored in gYDa-Sc securing on-the-fly card

replacements with minimum down time.

aLaRmSgYDa-Sc has advanced alarm handling,

where an operator can get a “system health

condition” report. The alarms will not be

removed from the alarm list until they are

acknowledged by an operator. an alarm

can be acknowledged while it still is active,

it will then be removed automatically from

the alarm list, the moment the cause of the

alarm is resolved.

Example of alarms:

• Cardremoved

• Lossofsignal

• Laserfailure

• Supplyvoltageoutofrange

• GPIinput

SyStEm vISuaLIzatIONas an optional feature you can use your

Visio system drawings to visualize the

connection and the system status in gYDa-

Sc.

gyda-SC aNd SNmP aPPLICatIONSall Flashlink modules will generate SNMP

traps according to user settings in the

interface configuration section on the

gYDa-Sc. gYDa-Sc is also able to interface

and control cross point settings of the

VikinX compact routers, providing cross

point information via SNMP or the web

interface.

This feature gives you the possibility to

have:

• Audiblealarms

• Alarmnotificationone-mail

• Browserpop-uponmodulepageswith

alarms

• Traprelay

LOggINgThe logging facility gives the user a system

history with date and time of each event.

The log will be stored on the flash card, and

can not be cleared without a reset, making

it ideal for error tracing «a posteriori».

The log file can easily be exported to your

computer for future reference

availability and Password protection

in the default setup, gYDa-Sc is available

to all users on the network. gYDa-Sc

allows anonymous/open access to the card

information. Two extra levels of protection

(observer and operator) can be enabled for

situations where anonymous access to the

system, alarm and log tabs is not wanted.

Manuals and technical documentation

are always available since gYDa–Sc has a

complete collection of all Flashlink manuals

in adobe PDF format.

System controller for Flashlink 2.1


CWDMCWDM

2

4

SDI/ASI2

SDI/ASIETH

SDI/ASI

Site 2

CWDMCWDM

2

4

SDI/ASI2

SDI/ASIETH

SDI/ASI

Site 3GYDA-SC GYDA-SC

fibre

CWDMCWDM

2

4

SDI/ASI2

SDI/ASIETH

SDI/ASI

Site 5GYDA-SC

CWDMCWDM

2

4

SDI/ASI2

SDI/ASIETH

SDI/ASI

Site 4GYDA-SC

fibre

CWDM

Site 1fibre

CWDM

fibre

fibre

4SDI/ASI

SDI/ASI

ETH

4

4SDI/ASI

SDI/ASI

ETH

4 Flashlink gives you the possibility to use ethernet over fiber.With this solution you can monitor and control the whole system with GYDA-SC

GYDA-SC

example of alarm list in gYDa-Sc


Modular Distribution amplifiers


2.1

multi Rate 3gHd-SdI distribution amplifier

ELECtRICaL OutPutSconnectors 75 ohm bNc

Output return loss - < -15db, 5MHz -1.5gHz - < -10db, 1.5gHz - 3gHz

Output signal level 800mV +/- 10%

Output signal rise / fall time 20% – 80% -SDlimit:[0.4ns–1.5ns];<0.5nsrise/fall var. - HD limit: < 270ps, <100ps rise/fall var. - 3g HD limit: <135ps, <50ps rise/fall var.

amplitude overshoot <10%

Polarity - Output 1,3 5 & 7: Non inverting electrical - Output 2, 4, 6 & 8: inverting electrical

Output timing jitter - SD: <0.2 ui - HD: <1 ui - 3g HD: <1ui

Output alignment jitter - SD: <0.15 ui - HD: <0.15 ui - 3g HD: <0.2ui

ELECtRICaL INPutSconnectors 75 ohm bNc

input cable eq. @270Mbps >300m w/belden 8281, with ber < 10e-12

input cable eq. @1485Mbps >100m w/belden 1694a, with ber < 10e-12

input cable eq. @2970Mbps >70m w/belden 1694a, with ber < 10e-12

input return loss - < -15db, 5MHz -1.5gHz - < -10db, 1.5gHz - 3gHz

Jitter tolerance - SD limit: - 10Hz-1kHz: >1 ui - 10kHz – 5MHz: >0.2 ui - HD limit: - 10Hz-100kHz: >1 ui - 100kHz–10MHz: >0.2 ui - 3g HD limit: - 10Hz-100kHz: >2 ui - 100kHz–10MHz: >0.3 ui

FEatuRESre-clocking automatic SD/ HD detection

automatic output slew rate adjustment according to SMPTe-259M and SMPTe-292M/ SMPTe424M

Selectable loop bandwidth - low: 3gHD = 3.5Mhz, HD = 1.5MHz, SD = 0.32MHz - High: 3gHD = 7MHz, HD = 3.5MHz, SD = 0.64MHz

Supported clock rates 270, 1483.5, 1485, 2967, 2970Mbps

input equalizer eq. bypass for non-video formats or low bit rates

SuPPORtEd StaNdaRdSSMPTe SMPTe424M, SMPTe292M, SMPTe259M,

SMPTe305M, SMPTe310M

DVb-aSi eN50083-9 (on non-inverting outputs)

da-3gHd

Equaliser

Bypass

MicrocontrollerRemoteControl

HD1

HD2

HD3

HD4

HD5

HD6

HD7

HD8

HDinput


Modular Distribution amplifiers 2.1


analog video multisignal distribution amplifier

•DCto200MHzanalogvideo• 6non-invertingoutputs• AlsosuitableforSDIaccording

to SMPTe-259M

ELECtRICaL INPutMaximum input 2 Vp-p

coupling Dc

impedance 75 ohm (switchable to high impedance)

connector bNc

ELECtRICaL OutPut

Number of outputs 6

connector bNc

impedance 75 ohm

Signal polarity 6 non inverting

aNaLOg vIdEO

Frequency range 0 to 200 MHz -3db

return loss > 40db @ 10MHz

Video S/N ratio > 70db

Differential gain < 0.1 %

Differential phase < 0.1 º

gain 0db ± 0.1db 0-15 MHz 0db ± 0.5db 0-150 MHz

aNaLOg amPLIFIER uSEd FOR SdI-vIdEO (SmPtE 259m)

gain 0db

Jitter < 700 ps, typ. 250 ps


Data rate up to 270Mbps

rise/fall overshoot < 10 %, typ. 0 %

rise and fall time > 400 ps, < 1500 ps, typ. 1000 ps

rise/fall time difference < 500 ps, typ. 100 ps

gENERaL

Power +5V Dc / 0.1 W, ±15V Dc / 1.9W

control control system for access to setup and module status with biTe (built-in Test equipment) for use with gYDa-Sc control System

da-va


Video1

Videoinput

Video2

Video3

Video4

Video5

Video6

SdI distribution amplifier

• SDI/ASIdistributionamplifier• 6non-invertingoutputs,2invertingoutputs• Re-clockingrates143,177,270,360,540Mbps•Configurablereclockerbypassfornon-videobitrates•ConfigurableEQdefeatforlowbitrates

ELECtRICaL SIgNaL INPutSNumber of inputs 1

Standard SMPTe 259M

Data rate 19.4Mbps – 540Mbps

connector 75 ohm bNc female

impedance 75 ohm nominal

return loss > 15db (5MHz-270MHz)

cable equalization 0 to 300m typical belden 8281a

ELECtRICaL SIgNaL OutPutSNumber of outputs 8


Signal level 800mVp-p ±100mV

Signal Polarity all outputs non-inverting


return loss > 15db (5MHz-270MHz)

FEatuRESre-clocking rates 143, 177, 270, 360, 540Mbps

Supported standards SMPTe 259M, 305.2M, 344M, 310M, DVb-aSi eN50083-9 (on non-inverting outputs), aeS-3id

configuration configurable autom. mute or bypass when not locked

input equaliser bypass for non-video formats configurable eQ mute

gENERaL

Power +5V Dc / 3W


da-SdI

Equaliser

Bypass


SDI1

SDI2

SDI3

SDI4

SDI5

SDI6

SDI7

SDI8

SDIinput


Modular Distribution amplifiers


2.1

dual digital audio distribution amplifier

•Digitalaudiodistributionamplifier•ConfigurableasDual1x4orSingle1x8• Reportssignalpresence• Supportssampleratefrom15to96kHz• Supportsbitratefrom16kbpsto14Mbps

ELECtRICaL INPutNumber of inputs 1 or 2

Standard aeS-3

Supported Sample rate 15-96kHz

Signal amplitude 0.2-7Vp-p

connector Db15 balanced


ELECtRICaL OutPut

Number of outputs 8 or 4+4


Signal amplitude 4Vp-p ±1Vp-p


FEatuRES

configurable dual 1 input to 4 outputs or single 1 input to 8 outputs

gENERaL

Power +5V Dc / 0.5W


da-aES


AES 1Output

AES 1Input

AES 1Output

AES 1Output

AES 1Output

AES 2Output

AES 2Input

AES 2Output

AES 2Output

AES 2Output

dual analog audio distribution amplifier

• Analogaudiodistributionamplifier• Precisiongainsettingsfor-12to+12dB• Allowsmixingof2inputsindual1x4mode• ForbalancedACsignalsfrom3.3Hzto400kHz



impedance > 10k ohm

Maximum input level +25dbu

common mode rejection >70db

ELECtRICaL OutPut

Number of outputs 8

connector Db25 balanced (Tascam Da88)

Frequency response 20 Hz–80kHz ±0.2db

crosstalk -100db

THD+N > 100db ref to 20 Hz-20kHz @ 20dbu

impedance 40 ohm nominal. Maximum 55 ohm

Maximum Output level +25dbu

Output voltage balance ratio >30db

Output common mode rejection >50db

Switched gain tolerance 0.1db

gain -12 to +12db

gENERaL

Power +5V / 0.1 W, ±15V / 1.9W


da-aa


ANA 1OutputANA 1

Input

Gain Settings

ANA 1Output

ANA 1Output

ANA 1Output

ANA 2Output

ANA 2Output

ANA 2Output

ANA 2Output

ANA 2Input

Gain Settings


Modular Distribution amplifiers 2.1


SdI distribution amplifierw/monitoring Output

• 8-bitcompositeencoderandDA• 3SDIand3compositeoutputs• Automaticstandardsdetection• EDHmonitoring• AlsoavailableasPAL-M version

dIgItaL SERIaL INPutSignal 4:2:2 SMPTe 259M-c, 270Mbps

equalization automatic

impedance 75 ohm

return loss >15db @ 270MHz

Signal level nom. 800mV

connector bNc

dIgItaL SERIaL OutPut

Signal 4:2:2 SMPTe 259M-c, 270Mbps reclocked

connector bNc

Number of outputs 3

impedance 75 ohm


Jitter max 0.2ui

Peak to peak signal level 0.8V ± 0.1V

aNaLOg OutPut

connector bNc

impedance 75 ohm

Formats composite video, Pal 625/50 or NTSc 525/60

Signal level 1Vp-p

return loss >40db up to 10MHz

PROCESSINg PERFORmaNCE

Signal path 8/10 bits

Sampling 27MHz

Video bandwidth 5.5MHz

SNr >60db typical

gENERaL

Power +5V Dc / 2W, -15V Dc / 0.6W


daC-mON

EDH

CVBS 1

CVBS 2

CVBS 3

SDI IN

SDI 1

SDI 2

SDI 3


embedders/De-embedders


2.1

FLaSHLINk BaCkPLaNES FOR 110 OHm aES3 OR 75 OHm aES-3Id

all Flashlink modules for audio are for 110ohm balanced aeS3 audio, but can also be ordered with a backplane for 75ohm unbalanced audio.

The tables below show the products and compatible backplanes.

BaCkPLaNE

aV-MuX-c1

(110ohm)

aV-MuX-c2

(75ohm)

aaV-DMuX-c1

(110ohm)

aV-HD-XMuX-c1

(110ohm)

aV-HD-XMuX-c2

(75ohm)

PROduCt

aV-MuX(-xxT) v x

aV-DMuX (-r) v x

aaV-MuX (-xxT) v

aaV-DMuX (-r) v

aV-HD/SD-XMuX x v x

aV-HD/SD-XMuX (-xxT) x v x

aV-HD/SD-XMuX (-r) x v x

aV-HD/SD-XMuX (-r-xxT) x v

v = Factory default backplanex = alternative backplane

audIO EmBEddINg

BaCkPLaNE

aDc-aeS-c1

(100ohm)

aDc-aeS-c2

(75ohm)

Dac-aeS-c1

(110ohm)

Dac-aeS-c2

(75ohm)

PROduCt

aDc-aeS v x

Dac-aeS v x

v = Factory default backplanex = alternative backplane

audIO CONvERSION

alternative backplane Short description (see respective user manual for detailed information)

aV-MuX-c2 2 slots, 4x 75ohm bNc i/p and 4x o/p, for aeS-3id

aV-HD-XMuX-c2 1 slot, 2x 75ohm bNc i/p and 2x o/p, for aeS-3id

aDc-aeS-c2 1 slot, 2x75ohm bNc o/p for aeS-3id

Dac-aeS-c2 1 slot, 2x75ohm bNc i/p for aeS-3id


embedders/De-embedders 2.1


digital audio Embedder

• 4-channel24-bitAES(8monoaudio)audio embedder

• Automaticinsertionofsamplerateconverters• EDHinaccordancewithSMPTE-RP165• Embeddinginacc.withSMPTE-272Mgiving

maximum compatibility to 3rd party products• TransformerbalancedAESin-andoutputs• Allowsexternalsamplingratesfrom16-144kHz

w/Src enabled•Canbeusedas4-CHembedder,4-CHde-embedderor

2-cH de-embedder/embedder • 110ohmbalancedand75ohmunbal.versionavail.•Optionalwithopticaloutput(AV-MUX-xxT)

gENERaLPower +5V Dc / 5.3W

control DiP Switches/gYDa-Sc

Monitoring Front panel leDs and gYDa-Sc

gPi SDi input loss, 4 x aeS input loss, laser failure, power good

aES audIO INPut/ OutPutSNumber of inputs 4 transf. balanced

Number of outputs 4 transf. balanced

Format aeS3-1992

impedance 110ohm or 75ohm

connector Db25-110ohm and bNc-75ohm

Sampling rates asynchronous to SDi 16-144kHz w/Src enabled. isosynchronous to SDi 48kHz

SdI INPut / OutPutData rate NrZ 270Mbps

Video Frame rates 50 Hz and 60 Hz

input equalization auto. up to 35db

impedance 75ohm

return loss >15db @270MHz


connector bNc

Output rise/fall time typ. 650ps

OPtICaL OutPut (OPtIONaL) Transmission circuit fiber Single mode 9/125um

light source F-P/DFb laser

Optical wavelength (ver. 13T) 1310nm ± 40nm

Optical power -7.5dbm

Optical power (option) 0dbm



Optical wavelength for cWDM See page 153

Optical power for cWDM modules 0dbm

Jitter (ui=unit interval) 0.135 ui max.

connector return loss better than 40db typ.

Maximum reflected power 4%

connector Sc/uPc according to SMPTe-297M

av-muX, av-muX-XXt

AES1Input

Microcontroller RemoteControl

SRCI0

AES2Input

SRCI0

AES3Input

SRCI0

AES4Input

AES1Output

AES2Output

AES3Output

AES4Output

OpticalOutput

SDIInput

SDIOutput

SRCI0

EQ Re-clocker EDH EDH4-chMultiplexer

4-chMultiplexer

digital audio de-embedder

• 4-channel24-bitAES(8monoaudio)audio de-embedder• EDHinaccordancewithSMPTE-RP165•De-embeddinginacc.withSMPTE-272Mgiving maximum compatibility to 3rd party products • TransformerbalancedAESoutputs• 110ohmbalancedand75ohmunbalanced version available•Optionalwithopticalinput(AV-DMUX-R)


control DiP Switches/gYDa-Sc


gPi SDi input loss, 2 x audio group, optical input loss, power good

OPtICaL INPut (OPtIONaL)Data rate optical 270Mbps

Sensitivity better than –20dbm typ.

Optical wavelength 1200-1620nm

Transmission circuit fiber Multi mode 50/125um. Single mode 9/125um compatible

connector return loss >40db w/SM fiber

Detector overload threshold min. –6dbm, typ. –3dbm

connector Sc/uPc

aES audIO OutPutNumber of outputs 8 transf. balanced

Format aeS3-1992

impedance 110ohm or 75ohm

connector Db25-110ohm and bNc-75ohm

Sampling rates 48kHz

SdI INPut / OutPutData rate NrZ 143-540Mbps

input equalization auto. up to 35db

impedance 75 ohm



connector bNc

Number of outputs 1

Output rise/fall time typ. 650ps

av-dmuX, av-dmuX-R


AES1Output

AES2Output

AES3Output

AES4Output

OpticalInput

SDIInput

SDIOutput

EQ EDH 4-chDe-multiplexer

4-chDe-multiplexer

Re-clocker

Also available with 75ohm AES-3id backplane



Hd digital audio Embedder and de-embedder

av-Hd-XmuX / av-Hd-XmuX-R / av-Hd-XmuX-t



2.1

EmBEddER FEatuRES• All-in-oneEmbedderandDe-embedder•Multi-formatSD/HDsupport• Embedsandde-embeds4AESsignals• AESinputswithsamplerateconversionallowingsamplingrates

from 32 to 192kHz• SamplerateconversionbypassforDolbyEaudio• TransformercoupledAESin-andoutputs• Accepts20or24bitaudio• RS-422inputforembeddingofserialdataorGPIinformation•UninterruptedtransportofAESaudioincaseoflossofSDIsignal• AutomaticmuteofAESincaseofAESerrors

OPtICaL PORt FEatuRES•Optionalopticalinputandoutputprovidingupto30dBopticalbudget(SD)• SupportspathologicalSDI/HDSDIpattern(checkfield)• 1310nm,1550nmandCWDMlasersavailable

audIO PROCESSOR/dELay FEatuRES• Audiomatrixandprocessorallowinggroupswap,channelshuffle,L/R

inversion and channel summing • 4-channelAESvariableaudiodelaylinewithupto1.2sdelay

OtHER gENERaL FEatuRES• Internalvideogenerator• AudioTestTonegenerator• Built-inEDHprocessor• Backplanesforbalanced110ohmandunbalanced75ohmAESavailable•GYDA-SCenabledforremotecontrol,statusmonitoring,errorreportingand

SNMP support

COmPLIaNt tO tHE FOLLOWINg BROadCaSt StaNdaRdSFormats StandardsSD, 270Mbps SMPTe 259M, SMPTe 272M-ac (synchronous

audio at 48kHz and extended data packets)HD, 1485 Mbps SMPTe 292M, SMPTe 274M, SMPTe 291M,

SMPTe 295M SMPTe 296M, SMPTe 299MaeS aeS3-1996Optical SMPTe 297M, SMPTe 292MeDH compliant to SMPTe-rP165


RS422RS422

EDH/De-Ser.

EDH/Ser.

De-embed.

Em-bedder

Optical Receiver Optical TransmitterSD / HD

optical fiber

SD / HD

optical fiber

SDI/HDInput

EQ SDI/HDOutput

EQ

Re-clocker

TxRx

AES1

AES2

AES3

AES4

AES1

AES2

AES3

AES4

AudioProcessing

• Audio Matrix• Audio Delay• Group swapping• Video Generator• Audio Generator

SRC

SRC

SRC

SRC




mEaSuREmENt CONdItIONSaudio Sampling rate 48 kHz

ambient temperature 25 ºc


control DiP switches, gYDa-Sc system controller. gPi

Monitoring Front panel leDs gYDa-Sc system controller and gPi.

eDH processing Full. received flags are updated, new crcs are calculated

ELECtRICaL vIdEO INPutVideo Data rate 270Mbps or 1.485gbps

Video frame rate 24p, 50i, 60i, 50p or 60p Hz.

equalization automatic up to 35db

impedance 75 ohm

return loss >15db @1,5gHz


connector bNc

OPtICaL vIdEO INPutTransmission circuit fiber Multi-mode 50/125 um

Optical wavelength 1200–1620nm

Maximum Optical power 0 dbm

Minimum Optical power HD/SD –25/–30 dbm

return loss better than 27 db typ.


connector Sc/uPc

audIO INPutSNumber of aeS inputs 4

audio data rate 32 kHz to 192 kHz, converted to 48 kHz if not isochronous to the video input signal

impedance (c1) 110 ohm transformer balanced

connector (c1) 25 pin D-sub. (4 inputs + 4 outputs)

impedance (c2) 75 ohm unbalanced

connector (c2) 4 x bNc

embedded audio word length: 24 bits

embedded audio channel status: as received when synchronous. Otherwise fixed

Sample rate converter dynamic range: 140 db(a)

data INPutSrS-422 1

connector rJ45

uarT baud rates 115200, 34800

Data length 5 to 8 bits

Parity None, odd or even

Stop bits 1, 1.5 or 2 bits

gPi mode raw data sampling frequency 93750bps (supports baud rates up to 19200)

ELECtRICaL vIdEO OutPutNumber of HD/SDi outputs 1

connector bNc

impedance 75 ohm

return loss > 15db @1.5gHz

Signal level nom. 800mV.

rise/fall time (SD) typically 650ps. @270Mbps

rise/fall time (HD) typically 100ps. @1485Mbps

OPtICaL vIdEO OutPutTransmission circuit fiber Single mode


Optical wavelength ver. 13T 1310nm ± 40nm Optical power: -7.5 or 0 dbm

Optical wavelength ver. cxxxxT (16 cWDM wavelength acc. to iTu-T g.694.2)

Optical power: 0 dbm


connector Sc/uPc HD/SDi digital serial component video

audIO OutPutSNumber of aeS outputs 4

audio data rate 48 kHz

impedance (c1) 110 transformer balanced

connector (c1) 25 pin D-sub

impedance (c2) 75 ohm unbalanced

connector (c2) 4 x bNc

data OutPutSNumber of rS-422 Outputs 1

connector rJ45

gPI OutPutSSignals Power status good, video optical input

loss, video electrical input loss

connector rJ45

Signal type Open drain transistor with free-wheel diode

Positive signal Valid video output

Maximum voltage 100 V

Maximum current 150 ma

av-Hd-XmuX-C1:Transponder

av-Hd-XmuX-C2: AES-3ID (75 ohm)

aav-dmuX-C1: AES-3 (110 ohm)

av-Hd-muX-C2: AES-3ID (75 ohm)

av-Hd-XmuX-C3:1 optical input, 2 SDI outputs and 4 BNC AES-3ID outputs




2.1

analog audio de-embedder

• 4channelanalogaudiode-embedder• 24bitconverters106dB(A)typicaldynamicrange•Cascadableforadditionalaudiochannels•GainadjustmentsonDIPswitches• EDHinsertionandhandling•Optionalwithopticalinput(AAV-DMUX-R)

gENERaLPower +5V/2.4W / ±15V/2.2Wcontrol DiP switchesMonitoring Front panel leDs and gYDa-Sc and gPieDH Processing Full. received flags are updated, new crcs

are calculatedDe-embedding level SMPTe 272M-c Synchronous audio at

48kHz and extended data packets (24-bit optional)

aNaLOg audIO OutPutSNumber of outputs 4 electronically balancedconnector D-sub 25 pin femalecommon mode voltage tolerance ±15 VOutput impedance (differential) 50ohmFrequency response 10 Hz–21.5kHz, +0db -0.1dbPassband ripple ±0.0002dbgroup delay 44 samples/0.9msStopband attenuation 75dbDynamic range* Min. 100db(a) (0dbFS @ +12dbu). Typ.

105db(a)THD+N @ -1dbFS Max. –80db, Typ. –87dbintermodulation dist. @–12db FS** Max. –80db, Typ. –87dbcrosstalk Max. –85db, Typ. –95db

SdI OutPut No. of SDi outputs 1connector bNcimpedance 75ohmreturn loss > 15db @270MHzSignal level nom. 800mV.rise/fall time typically 650ps.

OPtICaL INPut (OPtIONaL)Transmission circuit fiber Multi mode 50/125um

Single mode 9/125um compatibleOptical wavelength 1200-1620nmMax. Optical power 0dbmSensitivity -20dbm, typ. -25dbmreturn loss better than 40db typ.Max. reflected power 4%connector Sc/uPc

vIdEO INPutVideo Data rate 270MbpsVideo frame rate 50Hz or 60Hzequalization automatic up to 35dbimpedance 75ohmreturn loss >15db @270MHzSignal level nom. 800mVconnector bNc

* |(THD+N of –60db FS signal)| + 60 ** SMPTe 4:1 60 Hz + 7kHz

aav-dmuX, aav-dmuX-R

OpticalInput

SDI

Audio 2RAudio 2L

Audio 1RAudio 1LReclocker

deserialiserDe-embedder

analog audio Embedder

• 4channelanalogaudioembedder• 24bitconverters107dB(A)typicaldynamicrange•Cascadableforadditionalaudiochannels•GainadjustmentswithDIPswitches• EDHinsertionandhandling• 20or24bitembedding•Optionalwithopticaloutput(AAV-MUX-xxT)

gENERaL Power +5V/2.6W / +15V/1Wcontrol DiP switchesMonitoring Front panel leDs and gYDa-Sc and gPieDH Processing Full. received flags are updated, new crcs

are calculatedembedding level SMPTe 272M-c Synchronous audio at

48kHz and extended data packets (24-bit optional)

vIdEO INPut Video data rate 270MbpsVideo frame rate 50Hz or 60Hzequalization automatic up to 35dbimpedance 75 ohmreturn loss >15db @ 270 MHzSignal level Nom. 800 mVconnector bNc

audIO INPutS No. of ana. inputs 4audio data rate 48kHzimpedance 24 kohm electronically balancedconnector 25-pin D-subembedded audio word length: configurable 20 or 24 bits.Dynamic range* >100db(a)crosstalk < -90dbFrequency response 20-Hz-20kHz +0db –0.1dbcommon Mode rejection ratio (cMrr): Min 70db, typ 80dbgroup delay 12 samles, 250 usStopband attenuation 95db

SdI OutPut No. of SDi outputs 1connector bNcimpedance 75ohmreturn loss >15db @ 270 MHzSignal level Nom. 800 mVrise/fall time 650ps typ.

OPtICaL OutPut (OPtIONaL) Transmission circuit fiber Single mode 9/125umlight source F-P/DFb laserOptical wavelength (ver. 13T) 1310nm ± 40nmOptical power -7.5dbmOptical power (option) 0dbmOptical wavelength (ver. 15T) 1550nm ± 40nmOptical power (option) 0dbmOptical wavelength for cWDM See page 153Optical power for cWDM modules 0dbmJitter (ui = unit interval) 0.135 ui max.return loss >40dbMax. reflected power 4%connector Sc/uPc

* Dynamic range is calculated as |(THD+N of –60dbFS signal)|+60

aav-muX, aav-muX-xxt


SDIInput

SDIOutput

OpticalOutput

EQ Re-clocker EDH EDH4-chMultiplexer

ANA1

ANA2

A/DBal. InputGain

Setting

ANA3

ANA4




2.1

Hd/Sd analog/digital audio Embedder

aav-Hd-XmuX(-t/R)/ aav-Sd-XmuX(-t/R)


ambient temperature 25ºc

gENERaLPower +5V Dc 0.7a 3.5W

+-15V Dc 0.017a 0.5W

control DiP switches, gYDa system controller.

Monitoring Front panel leDs, gYDa system controller and gPi.

eDH/crc processing Full. received flags are updated, new crcs are calculated.

boot time 1.2 second

Digital audio inputs and outputs conform to aeS3-2003

Video inputs and outputs conform to SMPTe 292M-1998

Data input and output conform to eia rS-485

PROCESSINgVideo latency is variable due to the de-glitcher but the values below apply when the video signal is first applied. Other latency values are maximum values.

SD LatencieSVideo des+4+350+256+2+ser video samples =

45.3us

audio embedding aeS+2+1+16 audio samples=20/48000 = 417us

audio de-embedding 4+16+1 audio samples =21/48000 = 438us

embedding data gPi mode 8+4+32 96kHz samples =44/96000 = 458us

embedding data uarT mode 32+128+17+16 96kHz samples =193/96000 = 2.01ms

De-embedd. data gPi mode 8+32+8 96kHz samples =44/96000 = 458us

De-embedding uarT mode 8+32+8 96kHz samples =48/96000 = 458us

hD LatencieSVideo des+8+1024+1024+3+ser video samples =

27.6us

audio embedding aeS+2+1+8=12 /48000 = 250us

audio de-embedding 2+8+1=11/48000 = 229us

embedding data gPi mode 8+4+16 96kHz samples =28/96000 = 292us

embedding data uarT mode 16+128+17+16 96kHz samples =177/96000 = 1.84ms

De-embedd. data gPi mode 4+16+8 96kHz samples =28/96000 = 292us



RS422RS422

EDH/De-Ser.

EDH/Ser.

De-embed.

Em-bedder


optical fiber

SD / HD

optical fiber

SDI/HDInput

EQ SDI/HDOutput

EQ

Re-clocker

TxRx

AES1

AES2

ANA1

ANA2

AES1

AES2

AudioProcessing


A/D

A/D

SRC

SRC

• AAV-HD-XMUXcanhandleSDandHDdigitaluncompressedvideo• AAV-SD-XMUXcanhandleSDdigitaluncompressedvideo•De-embedandembedallgroupsofaudio•Copyormoveaudiogroupswithoutadditionaldelay•De-embed2AES3digitalaudioandnon-audiosignals• Embed2AES3digitalaudioandnon-audiosignals• Embed4analogueaudiosignals• ApplysamplerateconverterswhenneededontheAES3inputs• Applyextraaudiodelay• Swapstereochannels•Makemonoorsumfromstereosignals•Haveopticallaseroutput•Haveopticalinput• Transportasynchronousserialdata•Generatevideoandaudiosignals•De-glitchcorrectlysynchronisedswitchedvideo




aav-Hd-XmuX(-t/R)/ aav-Sd-XmuX(-t/R)

ELECtRICaL vIdEO INPutaaV-hD-XmuX Video Data rate 270Mbps or 1,485gbps

Video frame rate 24p, 50i, 60i, 50p or 60p and pull down rates

aaV-SD-XmuX Video Data rate 270Mbps

Video frame rate 50i and pull down 60i rates

equalisation automatic up to 35db

impedance 75 ohm

return loss >15db up to 1,5gHz


connector bNc

OPtICaL vIdEO INPutOptical wavelength 1200-1620nm ±40 nm

Maximum Optical power 0 dbm HD PiN.

Min. Optical power HD/ SD -24/-28 dbm with HD PiN.

return loss better than 27 db.

Maximum reflected power 0,04

Transmission circuit fibre Single mode HD PiN/ (Multi-mode option on request). Multi-mode PiN is standard with aaV-SD-XMuX

connector Sc/uPc

aNaLOguE audIO INPutSNumber of inputs 4

Sampling frequency 48 kHz

Differential input impedance 24 kohmcommon mode input impedance 50 kohm

connector (c1 backplanes) Db-25F (Female with uNc threads)

Max. signal level (0 dbFS) +12, +13.5, +15, +16.7, +18, +20, +21 or +24dbu.

level precision +- 0.1db where Zsource < 40 ohm.common mode voltage tolerance +- 30V – (Maximum peak signal level)

Frequency response 20 Hz – 20 kHz 0.1 db

Pass-band ripple +- 0.005 db

Stop band attenuation 80 db

Dynamic range Min. 103 db (a), typical 107 db(a)

THD+N @ -1 dbFS Max. -90 db, typical -96 db.

intermodulation distortion Max. -90 db, typical -95 db.

crosstalk Max. -90 db, typical -99 db.

cMrr (20 Hz – 15 kHz) Max. 70 db @ 15 kHz, typical -90 db @ lf.

dIgItaL audIO INPutSNumber of aeS3 inputs 2

audio data rate 30 kHz to 200 kHz, converted to 48 kHz if not isochronous to the video input signal.

input impedance 110 ohms transformer balanced.

connector (c1 backplanes) Db-25F (Female with uNc threads)embedded audio word length 20 or 24 bitsembedded audio channel Status as received when isochronous, otherwise

fixed.

Sample rate converter dynamic range 139 db(a) @ 1kHz

data INPutSrS422 1

connector 8P8c Modular jack

uarT mode

baud rates 9600 to 115200

Data length 7 or 8 bits



gPi mode

raw data sampling freq. 93750 Hz


connector bNc

impedance 75 ohm

return loss > 15 db to1.5gHz


rise/fall time typically 650ps. @270Mbps. < 270ps @1.485gbps

OPtICaL vIdEO OutPutOptical wavelength (13T) 1310nm ±40nm

light source FP semiconductor laser

Optical power -7.5 dbm

extinction ratio >5:1

Optical wavelengths (13T0, 15T, cxxxxT) 1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610nm ±6nm

light source DFb semiconductor laser

Optical power 0 dbm

extinction ratio >10:1

Jitter (ui=unit interval) <0.135 ui @ SD, <0.2 ui @ HD

return loss better than 40 db typ.


Transmission circuit fibre 9/125um Single Mode

connector Sc/uPc

dIgItaL audIO OutPutSNumber of aeS3 outputs 2


impedance (c1 backplanes) 110 ohm transformer balanced.

connector (c1 backplanes) Db-25F (Female with uNc threads)

data OutPutSNumber of rS485 outputs 1


gPI OutPutSSignals Power status good, no video input lock,

laser failure.


Signal type Open drain transistor with free-wheel diode.






2.1

Hd/Sd analog / digital audio de-embedder

aav-Hd-dmuX(-R)/ aav-Sd-dmuX(-R)


RS422

AES1

AES2

AES3

AES4

RS422

EDH/De-Ser.

EDH/Ser.

De-embed.

Em-bedder


optical fiber

SD / HD

optical fiber

SDI/HDInput

EQ SDI/HDOutput

EQ

Re-clocker

TxRx

ANA1

AudioProcessing


A/D

A/D ANA2

• AAV-HD-DMUXcanhandleSDandHDdigitaluncompressedvideo• AAV-SD-DMUXcanhandleSDdigitaluncompressedvideo•De-embedandembedallgroupsofaudio•Copyormoveaudiogroupswithoutadditionaldelay•De-embed2AES3digitalaudioandnon-audiosignals•De-embed4analogueaudiosignals• Applyextraaudiodelay• Swapstereochannels•Makemonoorsumfromstereosignals•Haveopticalinput• Transportasynchronousserialdata•Generatevideoandaudiosignals•De-glitchcorrectlysynchronisedswitchedvideo




aav-Hd-dmuX(-R)/ aav-Sd-dmuX(-R)


analogue audio output level setting +18 dbu = 0dbFS



+-15V Dc 0.02a 0.6W


Monitoring Front panel leDs, gYDa system controller and gPi.

eDH/crc processing Full. received flags are updated, new crcs are calculated.

boot time 1.2 second

Digital audio outputs conform to aeS3-2003

Video inputs and outputs conform to SMPTe 292M-1998

Data input and output conform to eia rS-485

PROCESSINgVideo latency is variable due to the de-glitcher but the values below apply when the video signal is first applied. Other latency values are maximum values.

SD LatencieSVideo des+4+350+256+2+ser video samples =

45.3us

audio embedding aeS+2+1+16 audio samples=20/48000 = 417us

audio de-embedding 4+16+1 audio samples =21/48000 = 438us

embedding gPi mode 8+4+32 96kHz samples =44/96000 = 458us

embedding uarT mode 32+128+17+16 96kHz samples =193/96000 = 2.01ms

De-embedding gPi mode 8+32+8 96kHz samples =44/96000 = 458us


hD LatencieSVideo des+8+1024+1024+3+ser video samples =

27.6us

audio embedding aeS+2+1+8=12 /48000 = 250us

audio de-embedding 2+8+1=11/48000 = 229us

embedding gPi mode 8+4+16 96kHz samples =28/96000 = 292us

embedding uarT mode 16+128+17+16 96kHz samples =177/96000 = 1.84ms

De-embedding gPi mode 4+16+8 96kHz samples =28/96000 = 292us


ELECtRICaL vIdEO INPutaaV-hD-DmuX Video Data rate 270Mbps or 1,485gbps

Video frame rate 24p, 25i, 30i, 50p or 60p and pull down rates. PsF formats are handled as interlaced.

aaV-SD-DmuX Video Data rate 270Mbps

Video frame rate 25i and pull down 30i rates

equalisation automatic up to 35db

impedance 75 ohm


Signal level Nom. 800mV

connector bNc

OPtICaL vIdEO INPutOptical wavelength 1200-1620nm ±40 nm

Maximum Optical power 0 dbm HD PiN.

Minimum Optical power HD/ SD -24/-28 dbm with HD PiN.



Transmission circuit fibre Single mode HD PiN/ (Multi-mode option on request). Multi-mode PiN is standard with aaV-SD-DMuX

connector Sc/uPc

data INPutSrS422 1

connector Modular jack 8P8c

packet or uart moDe baud rates 9600 to 115200

Data length 7 or 8 bits



Gpi moDe raw data sampling frequency 93750 Hz


connector bNc

impedance 75 ohm



rise/fall time typically 650ps. @270Mbps. < 270ps @1.485gbps

aNaLOguE audIO OutPutSNumber of outputs 4

Sampling frequency 48 kHzDifferential output impedance 53 ohmscommon mode output impedance 20 kohm

connector (c1 backplane) Db-25 female.Maximum signal level (0 dbFS) +24dbu or lower in 0.5 db steps. +-0.1 db

tolerancecommon mode voltage tolerance + 50V, -0V

Frequency response 20 Hz – 20 kHz +-0.2 db

Pass-band ripple +- 0.002 db

Stop band attenuation 82 db

Dynamic range Min. 98 db (a) @ +12dbu = 0dbFS Max. 110 db(a) @ +24dbu = 0dbFS

THD+N @ -1 dbFS Max. -90 db, typical -96 db.

intermodulation distortion Max. -90 db

crosstalk Max. -90 db, typical -95 db.

cMrr (1kHz bbc method) Max. 46 db, typical 65 db.

dIgItaL audIO OutPutSNumber of aeS3 outputs 4


impedance (c1 backplanes) 110 ohm transformer balanced.

connector (c1 backplanes) Db-25 female.

data OutPutSNumber of rS485 outputs 1



laser failure.


Signal type Open drain transistor with free-wheel diode.






2.1

analog audio and video transport module

• 4channelanalogaudioandvideoembedder• Terminationswitchesandloopconnectorsforinputvideo•Cascadableforadditionalaudiochannels• EDHinsertion• 20or24bitaudioprocessing•Optionalwithopticaloutput(AVA-MUX-xxT)



Measurement bandwidth 20 Hz-20 kHz

Detector rMS

input overload level (0 dbFS) +18 dbu


+15V Dc 0.063a 0.95W -15V Dc 0.027a 0.4W

control DiP switches, gyda system controller

Monitoring Front panel leDs and gyda system controller


embedding level SMPTe S272M c Synchronous audio at 48 kHz and extended data packets (24 bit optional).

embedded audio word length configurable 20 or 24 bits.

Video processing word length 10 bits

audio delay 0.79 ms

Video delay 132.3 μs

audIO INPutSNumber of analog inputs 4

Differential impedance 25 kohm, electronically balanced

connector Db25 pin, female

Maximum signal level configurable +12dbu to +24dbu (= 0dbFS)

common mode voltage tolerance ±30 V

Frequency response 20Hz – 20kHz ±0.db

Passband ripple ±0.035db

Stop band attenuation 95db

Dynamic range1) Min. 101db(a) (0dbFS = +12dbu), Typ. 107db(a)

THD+N @ -1db FS Max. -85db, Typ. < -95dbintermodulation distortion2) @–12db FS Max. -90db

crosstalk Max. -80db, 20Hz – 20kHz, Typ. -95db

cMrr (0 Hz – 8kHz) Min. 70db, Typ. 80db

SdI OutPutVideo Data rate 270Mbps

Number of SDi outputs 1

connector bNc

impedance 75ohm

return loss > 15db @270MHz

Signal level nominal. 800mV

rise/fall time typically 650ps

OPtICaL OutPut (OPtIONaL)Transmission circuit fiber Single mode 9/125um


Optical wavelength (ver. 13T) 1310nm ±40nm



Optical wavelength (ver. 15T) 1550nm ±40nm

Optical power 0dbm


Optical power 0dbm

Jitter (ui=unit interval) Max. 0.135 ui

return loss Typ. > 40db


connector Sc/uPc

gPIgPi Output Power good, SDi unlock, embed error, audio

overload1, audio overload2

gPi connector rJ45

Signal type Open collector transistor

Maximum voltage 50V

Maximum current 400ma if only one output driven, 100ma all outputs driven

1) (THD+N of –60db FS signal)| + 60

2) SMPTe 4:1 60 Hz + 7kHz

ava-muX, ava-muX-xxt

CVBS or Y

Audio 1L

Audio 1R

Audio 2L

Audio 2R

Line 1 Marking

EDHprocessor

SDI

OpticalOutput

CVBS or C

Embedder Serialiser

Occupies two slots




analog audio and video transport module

• 4channelanalogaudioogvideode-embedder• Componentandcompositevideooutputs•Cascadableforadditionalaudiochannels• EDHhandling•Optionalwithopticalinput(AVA-DMUX-R)

mEaSuREmENt CONdItIONSaudio Sampling rate 48kHz

ambient temperature 25 Oc

Measurement bandwidth 20 Hz-20kHz

Detector rMS

input overload level (0dbFS) +18dbu

gENERaLPower +5V/5.3W, +15V/1.5W, -15V/1.3W

control DiP switches/gYDa-Sc



De-embedding level SMPTe S272M c – Synchronous audio at 48kHz and extended data packets

audio Delay 0.67 ms (12+20 audio samples)

Video Delay 5.1us in minimum delay mode, 40ms or greater if frame buffer is used

SdI vIdEO INPutVideo Data rate 270Mbps

Video frame rate 50 Hz or 60 Hz


impedance 75ohm


Signal level nominally 800mV

connector bNc

OPtICaL INPut (OPtIONaL)Transmission circuit fiber Multi mode 50/125um,

Single mode 9/125um comp.


Maximum Optical power 0dbm

Sensitivity -20dbm, typ. -25dbm

return loss better than 40db typ


connector Sc/uPc

ava-dmuX, ava-dmuX-R

OpticalInput

BB

SDI

Audio 2RAudio 2L

Audio 1RAudio 1L

Y, G or CVBS

U, B or Y

Y, R or C

CVBS, Y or BB

Reclockerdeserialiser

De-embedder

FrameSynchroniser

Occupies two slots

BLaCk BuRSt REFERENCE INPutinput signal SMPTe 170M / Pal iTu 624-4

return loss > 35db up to 5.75MHz

Termination 75ohm

vIdEO OutPutSNumber of video outputs 4

Formats YuV+cVbS, rgb+cVbS, Yc+Y+cVbS, Yc+bb+cVbS

connector bNc

impedance 75ohm

return loss > 35db up to 5.75 MHz

Signal level 1V

audIO OutPutSNumber of analog outputs 4 electronically balanced

audio sampling frequency 48kHz

impedance 50ohm differential, 5 kohm common mode

connector 25 pin D-sub

De-embedded audio word length up to 24 bits

Frequency response1) 20Hz – 20kHz

Dynamic range2) > 106db(a)

THD+N @ 0dbFS better than 0.01%, –80db

intermodulation distortion3) better than 0.01%, –80db

crosstalk < -90db

Noise < –75dbqp ccir-468 weighted, < –90dbu a-weighted

gPIgPi Output Power good, SDi unlock, de-embed error,

audioa invalid, audiob invalid

gPi connector rJ45

Signal type Open collector transistor


Maximum current 400 ma if only one output driven, 100 ma all outputs driven

1) ±0.1db relative to the level at 500 Hz

2) |THD+N @ -60dbFS a-weighted| + 60

3) SMPTe iM, 60 Hz + 7kHz 4:1 @ -12dbFS (rMS)



2.1



HD to SD Downconverter with Framesync and arc 2.1


Hd down-Converter with Optical Input and audio decoding

dWC-Hd-dmuX

gENERaLPower 5V, +/-15V Dc, <7W


Monitoring Front panel leDs, gYDa system controller.

ELECtRICaL vIdEO INPutVideoDatarate 270Mbpsor1,485Gbps;ConformtoSMPTE

292M-1998, SMPTe 259M-c

Videoframerate 1080i/29.97;1080p/23.976;1080i/25;1080p/25;720p/59.94;720p/50

equalization automatic up to 35db (eq. 300m @270Mbps with belden 8281 / 100m @1485Mbps with belden 1694a)

impedance 75 ohm



connector bNc

OPtICaL vIdEO INPutOptical wavelength 1200-1620nm

Maximum Optical power –3 dbm HD PiN.

Minimum Optical power HD/ SD –22/–28 dbm with HD PiN.



Transmission circuit fiber Single mode HD PiN/ (Multi-mode option on request)

connector Sc/uPc


connector bNc

impedance 75 ohm



Number of analog Video outputs 3

analog Video output formats 3 x cVbS. component g/b/r, component Y/Pb/Pr or S-video. Pal and NTSc.

connector bNc

impedance 75 ohm

return loss > 35 db to30 MHz

audIO OutPutSNumber of aeS3 outputs 1

aeS3 audio data rate 48 kHz

connector aeS3 rJ45

Number of balanced analog stereo audio outputs 1

connector analog audio WecO screw terminal

vERSIONS / OPtIONSDWc-HD HD down converter, SD/cVbS output

DWc-HD-DMuX HD down converter, SD/cVbS output, aeS/ebu and Stereo analog audio output

DWc-HD-r HD down converter with high sensitivity 9/125um single mode optical input, SD/cVbS output

DWc-HD-DMuX-r HD down converter with high sensitivity 9/125um single mode optical input, SD/cVbS output, aeS/ebu and Stereo analog audio output

DWc-HD-M HD down converter for monitoring applications, SD/cVbS output, without genlock

DWc-HD-M-DMuX HD down converter for monitoring applications, SD/cVbS output, without genlock, aeS/ebu and Stereo analog audio output

DWc-HD-M-r HD down converter with high sensitivity 9/125um single mode optical input, for monitoring applications, SD/cVbS output, without genlock

DWc-HD-M-DMuX-r HD down converter with high sensitivity 9/125um single mode optical input, for monitoring applications, SD/cVbS output, without genlock, aeS/ebu and Stereo analog audio output

Video Dac

Stereo audioDac

SDre-embedder

audio Matrix

Frame buffer

audio buffer

Down Scaler

audio Proc

2x2 x-point

HD/SD OuT

HD/SD OuT

cVbS/cVbS/Y/g

analog Video Outputs

cVbS/Y/cb/b

cVbS/c/cr/r

Stereo audioanalog OuT

Digitalaudio OuT

HD/SDDe-ebedder

HD/SD inputOptical

HD/SD inputelectrical

reclocker/De-serialiser

SD

SDSDHD

Digital audio

• Broadcastquality•Opticalinputwithdirectreclockedelectricaloutput•Highqualitydown-conversion• Analogaudiomonitoring• SDIandanaloghighqualityvideooutput• Audiodelay• Internalvideoandaudiogenerator• SDframestorefordown-convertedoutput• Syncinput• PhaseTru™technologyimproves1080ito576i/480iconversion


Video conversion


2.1

NtSC/PaL to SdI decoder

• 10-bitcompositetoSDIdecoder• Automaticstandardsdetection• EDHprocessing• 2xoversampling(27MHz)• Analoginputsw/loop-through,3SDIoutputs• 3-lineadaptivecombfiltersandselectablefiltersettings

INPutFormats composite Video Pal (625/50) NTSc

(525/60) Y/c (S-Video), with active loop-through

return loss >35db up to 5.75MHz

Signal level nom 1000mV, ± 10mV

OutPutSignal (3x) 4:2:2 SMPTe 259M-c, 270Mbps



PROCESSINg PERFORmaNCE Quantisation 10 bits

Sampling 27MHz (2x oversampling)

Video bandwidth 6MHz

SNr (unweight) > 60db

Diff. gain < 0.6%

Diff. phase < 1.00°

Power + 5VDc / 2.2W, - 15VDc / 0.7W

SELECtaBLE Luma/CHROma SEPaRatION FILtERS•Adaptive3-linecombfilter•Fixed2-linecombfilter•Low-pass/bandpass

adC-SdI

Loop

SDI 2

Loop

CVBS/Y

CVBS/C

Genlock

PAL/NTSCField 1

InsertionDecoder

Microcontroller

EDHADC

SDI 3

RemoteControl

SDI 1

video a/d Converter and decoder

• 10-bitcomponent,compositeorY/CtoSDIconverter• Built-invideoPROC-AMP• 3SDIoutputs• 5lineadaptivecombfilterandselectablefiltersettings• Automaticstandardsdetection• EDHprocessing

dIgItaL SERIaL OutPut Signal type SMPTe 259M / iTu-r bT.601

connector bNc

impedance 75ohm


Jitter < 0.2ui

Peak to peak signal level 800mV ± 80mV

COmPOSItE aNd y/C INPutSignal type composite video, Pal 625/50Hz or NTSc

525/60Hz Y / c (S-video)

connector bNc

impedance 75ohm

Signal level 1Vp-p

return loss >40db

COmPONENt aNd RgB INPutSignal rate 625/50Hz or 525/60Hz

Signal type rgb without setup, with separate sync. SMPTe / ebu Y, cr, cb

connector bNc

impedance 75ohm

Signal level Y = 1Vp-p. cb, cr, r, g, b = 0.7Vp-p

return loss >40db

PROCESSINg PERFORmaNCESignal path 10 bits

Sampling 27MHz, 2 x oversampling

luma/chrome separation Selectable 5 line adaptive comb filter or chroma trap filter


Hue accuracy 0.5° typical

color Sat. accuracy 0.8% typical

luminance Nonlinearity 0.6% typical

SNr (unified weighted) 66db typical

Diff. gain <1.0%

Diff. phase <1.0°

Video processing delay 3 video lines

Power +5V Dc / 2.75W, -15V Dc / 0.5W

adC-SdI-CC

SDI 2PAL/NTSC

Field 1Insertion

Microcontroller

EDHDecoder

ADC

SDI 3

RemoteControl

SDI 1

Genlock

VideoBuffer

CVBS/Lum2

Green/Y

Red/Pr

Blue/Pb/Crom2


Video conversion 2.1


SdI to NtSC/PaL Encoder and d/a Converter

• 10-bitSDItocompositeencoderand10-bitSDItocomponent converter in one product

• Built-inframesynchronizerw/sub-carrierandhorizontalphase adjustment

• Largeframebuffer(4frames)• EDHmonitoring• 4xoversampling(54MHz)• SDIinputw/loop-through,4analogoutputs

dIgItaL SERIaL INPutSignal 4:2:2 SMPTe 259M-c, 270Mbps, with active

loop through

equalization automatic

impedance 75 ohm



connector bNc

BLaCk&BuRSt INPutinput Signal composite Pal 625/50 or NTSc 525/60

return loss > 35 db up to 10MHz

dIgItaL SERIaL OutPutconnector bNc

impedance 75 ohm


Jitter max 0.2ui


FRamE dELay OutPutOutput level Open collector pulled high to 5V.

aNaLOg OutPutconnector bNc

impedance 75 ohm

Formats composite video, Pal 625/50 or NTSc 525/60, rgb, YuV / Ycrcb Y / c (S-video), composite and component video is provided simultaneously

Signal level 1Vp-p

return loss >35db up to 10MHz

Minimum signal delay 3µs

Signal delay when locked to black&burst 1-2 Frames

PROCESSINg PERFORmaNCESignal path 10 bits

Sampling 54MHz, 4 x oversampling


Hue accuracy 0.5° typical

color Saturation accuracy 0.8% typical

luminance Nonlinearity 0.6% typical

chroma aM Noise -62db typical

chroma PM Noise -72db typical

SNr -70db typical

Diff. gain <1.0%

Diff. phase <1.0°

Power +5V Dc / 3.1W, -15V Dc / 0.7W

daC-SdI

Loop

R/V/Luma

SDI

Microcontroller

CVBS/Y/Black Burst

RemoteControl

B/U/Cuma

G/Y/CVBS

EDH

10-BitEncoder/

DAC

EQ

Genlock

Re-clockerFrameBuffer Filter

H-PhaseAdj.


audio conversion


2.1

dual audio d/a Converter

• 24-bithighperformanceAEStoanalogaudioconverter

• Twoindependentconvertersononeboard• Typicaldynamicrangeof120dBA• TransformerbalancedAESinputs• Allowssamplingratesfrom32–96kHz

aNaLOg OutPutSNumber of outputs 2x 4 electronically balanced

Frequency response 20Hz > –0.1db > 20kHz


group delay 43.5 samples

Stopband attenuation 110db

Dynamic range Min. 112dba, Typ. 120dba

THD+N @ -1db FS Max. –90db, Typ. –100db

crosstalk Max. –100db, Typ. –110dbOutput differential impedance 50 ohm

aES audIO INPutNumber of inputs 2 transformer. balanced

Format aeS3-1992

impedance 110ohm

connector Db15-110ohm

Sampling rates 29kHz–100kHz

gENERaLPower +5V/1.4W / ±15V/3.5W

control control system for access to set-up and module status with biTe (built-in Test equipment)

daC-aES

AESReceiver

Re-clocker

AES1ANA1A

ANA2A

D/A Lowpassfilter + gain

ANA1B

ANA2B

AES2II


ANA3A

ANA4A

ANA3B

ANA4B

dual audio a/d Converter

• 24-bithighperformanceanalogaudiotoAESconverter

• Twoindependentconvertersononeboard• Typicaldynamicrangeof117dBA• TransformerbalancedAESoutputs• Internalsamplingrates44.1,48and96kHz


aNaLOg INPutSNumber of inputs 4 electronically balanced

Frequency response 10Hz > –0.1db > 21.5kHz


common mode voltage tolerance +/- 30V

group delay 65 samples

Stopband attenuation 110db

Dynamic range Min. 112dba, Typ. 117dba

THD+N @ -1db FS Max. -95db, typ. -102db

crosstalk Min. –100db, Typ. –110db

cMrr Min. 70db, Typ. 80dbinput differential impedance 25kohm

aES audIO OutPutS aNd SyNC. REF INPutNumber of outputs 2x2 transformer. balanced

Format aeS3-1992

impedance 110ohm

connector Db15-110ohm

internal sampling rates 44.1kHz, 48kHz, 88.2kHz

external synchronisation aeS3 on Db15 connector

Sync. input impedance 110ohm

external sampling rates 29kHz–100kHz

gENERaLPower +5V/2.4W / ±15V/2.1W

control control system for access to setup and module status with biTe (built-in Test equipment)

adC-aES

ANA1

ANA2

A/DBal. InputGain

SettingAES Format

+ Driver

AESSync. Ref.

AES1B

AES2B

AES2AANA3

ANA4

Clock Control PLD

AES Receiver Microcontroller RemoteControl

AES1A


Synchronisation 2.1


dual aES audio delay

• 2independentaudiodelaysignalpaths• Built-insamplerateconverteraccepting32,41.1,44.1kHz• Black-burstandAES-11referenceinput•Upto10sdelayat48kHz• Simultanousfixeddelayandexternallyswitchabledynamic

delay•DelaytrackinginputforsynchronisationwithDAC-SDI,FRS-

SDi or other video devices• 2AESoutputsperdelayline• TransformerbalancedAESin-andoutputs

gENERaLPower +5V Dc approx. 0.3a 1.5W

control DiP switches, gYDa-Sc


INPutS (aES3-1995)Number 2

connector Db25 femaleSample rate converterword-length 24 bits

Sample rates any between 1/3 and 3 times the reference sample rate

REFERENCE INPutFormat aeS11 (aeS-3-iD) or analog video

connector bNcreference Sample rate from video 48kHz

Sample rates from 48, 44.1, 32kHz

OutPutS (aES3-1995)Number 4


usage either dual outputs from delay lines 1 & 2 or quad outputs from delay line 1

dELayMinimum delay 92 samples at 48kHz

Maximum tracking delay 230ms

Maximum fixed delay @ 48kHz 10.6s

Maximum fixed delay @ 44.1kHz 11.6s

Maximum fixed delay @ 32kHz 16.1s

dLy-aES


AES 2 (2)

AES 2 (1)

AES 1 (2)

AES 1 (1)

Black Burst

Reference Input

Delay Control Input

AES 2

AES 1

Tracking Input

AES-11

GPI x 2

Clock Control PLD

SRC

SRC

Sync. Sep.

Delay Controld

Delay MUX

Delay

Tracking Control

Dip Sw. Setting

d

SdI Line Synchronizer

• SDI10bit4:2:2linesynchronizer• AnalogBlackBurstgenlock• EDHinsertionandhandlinginaccordancewithSMPTE-

rP165• SDI4:2:2inputwithoneactiveloop-throughoutput• 3xSDI4:2:2linesynchronizedoutputs• Automaticdetectionof525-and625-lineformatinput

dIgItaL SERIaL INPutinput format 270Mbps scrambled NrZi 4:2:2 video

(SMPTe 259M)


Signal level 800mV nominal


impedance 75 ohm

connector bNc

dIgItaL SERIaL OutPutOutput format 270Mbps scrambled NrZi 4:2:2 video

(SMPTe 259M)

Number of outputs 3 synchronized outputs, 1 buffered loop of input


rise/fall time typ. 650ps

Jitter 0.2ui max.


impedance 75 ohm

connector bNc

REFERENCE INPutinput format black burst, composite analog (NTSc

SMPTe 170M / Pal iTu 624-4)

Signal level 1Vp-p

impedance 75 ohm, loop must be terminated with 75 ohm

connector bNc

dELay adJuSmENtSMinimum delay 39 samples

Maximum delay 1 line + 39 samples

resolution down to video sample resolution

POWERinput voltage 5VDc/3.0W, -15VDc/0.3W

LIS-SdI

Ref

SDI 2

Loop

SDIloop

SDI in

Genlock

EDHinsertor

Microcontroller

SDI 3

RemoteControl

SDI 1

Tracking DelayOutput

Linesynchroniser

Reclocker& EDH-analyser


Synchronisation


2.1

SdI Frame Synchronizer

• SDI10bit4:2:2framesynchronizerwithembeddedaudiohandling

• AnalogBlackBurstgenlock• Selectablefreezeonlastgoodframeorblackvideoonerroror

on loss of input signal• EDHinsertionandhandlinginaccordancewithSMPTE-RP165•Widedelayrange,from128usupto232ms(Sample,HandV

adjustment)• Audiodelaytrackingoutput• SDI4:2:2inputwithoneactiveloop-throughoutput• 3xSDI4:2:2synchronizedoutputs• Automaticdetectionof525-and625-lineformatinput

dIgItaL SERIaL INPutinput format 270Mbps scrambled NrZi 4:2:2 video

(SMPTe 259M)




impedance 75 ohm

connector bNc

dIgItaL SERIaL OutPutOutput format 270Mbps scrambled NrZi 4:2:2 video

(SMPTe 259M)

Number of outputs 3 synchronized outputs, 1 buffered loop of input



Jitter 0.2ui max.


impedance 75 ohm

connector bNc

REFERENCE INPut input format black burst, composite analog (NTSc

SMPTe 170M / Pal iTu 624-4)

Signal level 1Vp-p

impedance 75 ohm, loop must be terminated with 75 ohm

connector bNc

dELay adJuStmENtS Minimum delay 120us or 2 video lines

Maximum delay 232ms

resolution down to video sample resolution

POWERinput voltage 5VDc/3.0W, -15VDc/0.3W

FRS-SdI

Ref

SDI 2

Loop

SDIloop

SDI in

Genlock

EDHinsertor

Black VideoGenerator

Microcontroller

SDI 3

RemoteControl

SDI 1

Tracking DelayOutput

Frame synchroniser

and Delayadj.

Reclocker& EDH-analyser


Synchronisation 2.1


Hd frame synchroniser with optical input

gENERaLPower 5V, +/-15V Dc, <5W


Monitoring Front panel leDs, gYDa system controller and gPi

eDH/crc processing Full. received flags are updated, new crcs are calculated

ELECtRICaL vIdEO INPutVideoDatarate 270Mbpsor1,485Gbps;ConformtoSMPTE

292M-1998, SMPTe 259M-c

Video frame rate 24p, 50i, 60i, 50p or 60p and pull down rates

equalization automatic up to 35db (eq. 300m @270Mbps with belden 8281 / 100m @1485Mbps with belden 1694a)

impedance 75 ohm



connector bNc

OPtICaL vIdEO INPutOptical wavelength 1200–1620nm

Max. Optical power -3dbm HD PiN

Min. Optical power HD/ SD -22/-28dbm with HD PiN.

return loss better than 27db

Max. reflected power 4%

Transmission circuit fiber Single mode HD PiN/ (Multi-mode option on request)

connector Sc/uPc

ELECtRICaL vIdEO OutPutNo. of HD/SDi outputs 4

connector bNc

impedance 75 ohm



audIO/ data OutPutSNumber of aeS3 / rS-422 data outputs 1

aeS3 audio data rate 48 kHz

connector aeS3 / rS-422 rJ45

Number of analog stereo audio outputs 1

connector analog audio WecO screw terminal


Frame delay

connector rJ45

Signal type Open drain transistor with free-wheel diode

aPPLICatIONSany professional broadcast application where HD/SD frame synchronisation is requested.

vERSIONS / OPtIONSFrS-HD-SDi SD/HD frame sync with internal audio

handling and gPi i/O control, 4 SDi outputs

FrS-HD-DMuX SD/HD frame sync, analog stereo audio out, aeS out (or rS-422 data out, replaces aeS), 4 SDi outputs

FrS-HD-SDi-r SD/HD frame sync with high sensitivity 9/125um single mode optical input, internal audio handling and gPi i/O control, 4 SDi outputs

FrS-HD-DMuX-r SD/HD frame sync with high sensitivity 9/125um single mode optical input, analog stereo audio out, aeS out (or rS-422 data out, replaces aeS), 4 SDi outputs

FRS-Hd-dmuX

•Opticalinput(option)•HD/SDvideosupport•De-glitchingofinputsignal.• Audiode-embedding–processing–re-embedding• Audiofadeout/fadein• Audiorouter• Audiodelay• FrameSync,adjustableupto8frames•Change-overandinputprioritybetweenopticaland

electrical input, selectable• Syncinput,eitherPAL,NTSCorHDTri-level• Videoluma,chroma,gainandleveladjustment• 4videooutputs,eitherreclockedinputorframe

synchronised• AES3(48kHz),orRS-422dataavailableon1port,

synchronous to video signal• FramedelayoutputonGPIconnector


Hd Changeover

•Multi-ratechangeover•Non-broadcastdataratesalsosupportednon-reclocked• Autochangeoveronsignallossorreclockerror•Configurablechangebacklogic• Reportssignallossandbitrate•GPIcontrolandalarms• IntegratedDAwith4re-clockedHD/SDIoutputs

ELECtRICaL INPutNumber of input 2

Data rate NrZ 1 to 1485Mbps

equalization automatic. cable reclocker can be bypassed to support bit rates down to 1Mbps

impedance 75 ohm

return loss >= 15db @ 1485MHz

Signal level nom. 800mV. app. 200mV min. when equaliser switched to bypass

connector bNc

ELECtRICaL OutPutNumber of outputs 4

connector bNc

impedance 75 ohm

return loss >= 15db @ 1485MHz

Jitter max 0.2ui


Signal polarity 2 outputs non inverting, 2 outputs inverting

FEatuRESre-clocking automatic clock rate detection.

Supported clock rates: 143, 177, 270, 360, 540 and 1485Mbps

gENERaLPower +5V Dc / 3W Max.


SuPPORtEd StaNdaRdSSMPTe SMPTe 292M, SMPTe 259M,

SMPTe 305.2M, SMPTe 310M, SMPTe 344M

DVb-aSi eN50083-9

HdSdI-CHO-2X1

ReclockerSwitch2 x 1

Bypass 177M / ASI


Equaliser

Bypass

HD/SDMain input

Equaliser

Bypass

HD/SDStandby input

HD/SD1Outputs:

HD/SD2

HD/SD3

HD/SD4

SdI Changeover

• SDIchangeover•Non-broadcastdataratesalsosupportednon-reclocked• Autochangeoveronsignallossorreclockerror•Configurablechangebacklogic• Reportssignallossandbitrate•GPIcontrolandalarms• IntegratedDAwith4re-clockedSDIoutputs

ELECtRICaL SIgNaL INPutSNumber of inputs 2

Standard SMPTe 259M

Data rate 1Mbps–540Mbps



return loss > 15db (5MHz–270MHz)


ELECtRICaL SIgNaL OutPutSNumber of outputs 4


Signal level 800mVp-p ±10%

Signal Polarity 2 outputs non-inverting, 2 outputs inverting



FEatuRESre-clocking rates 143, 177, 270, 360, 540Mbps

Supported standards SMPTe 259M, 305.2M, 344M, 310M, DVb-aSi eN50083-9, aeS-3id

re-clocking configurable automatic mute or bypass when not locked

input equaliser bypass for non-video formats

CONtROL INtERFaCEScontrol control system for access to set-up and

module status with biTe (built-in Test equipment)

ELECtRICaLPower +5V Dc / 3W

SdI-CHO-2X1

ReclockerSwitch2 x 1

Bypass 177M / ASI


Equaliser

Bypass

SDMain input

Equaliser

Bypass

SDStandby input

SD1Outputs:

SD2

SD3

SD4

automatic changeover Modules


2.1


Optical converters 2.1


SdI Electrical to Optical Converter

• Built-indualoutputDistributionAmplifier•Highperformancelaserforthelonghaul•DVB-ASIcompatible• SMPTE259M/297Mcompliant

SdI-EO-13t/15t

gENERaL Power

+5V Dc / 1.6W


OPtICaL OutPut Transmission circuit fiber

Single mode 9/125um











CWdm

gENERaL Power

+5V Dc / 1.6W



Single mode 9/125um

light source DFb laser

Optical wavelength See page 153

Optical power 0dbm





dWdm

gENERaLPower

+5V Dc / 10W Max. 5W typically


OPtICaL OutPutTransmission circuit fiber

Single mode 9/125um


Optical centre wavelength See page 153

Optical power 0dbm (optionally +5dbm)

Max. wavelength drift ± 0.16nm

Jitter (ui=unit interval) 0.135 ui max. @ 270Mbps



connector Sc/uPc acc. to SMPTe 259M

SdI-EO

Optical Transmitter

EqualiserSDI Input19.4-540Mbps

2 x SDIOutput

OpticalOutput

Distribution Amplifier

INPutS Data rate NrZ 19.4Mbps – 540Mbps

equalization auto. up to 35db

impedance 75 ohm



connector bNc

SdI OutPut

Number of outputs 2

connector bNc

impedance 75 ohm




StaNdaRdS

Supported standards for electrical and optical ports:SMPTe 259M, SMPTe 297M, SMPTe 305.2M, SMPTe 310MDVb-aSi eN50083-9


dual SdI Electrical to Optical Converter

•High-densitypackagingintheultracompact2RUframe• 1310nm,1550nmandCWDMlaseravailable•Highperformancelaserforthelonghaul• FullDVB-ASIcompatibility• ActiveloopedSDIoutput• Alsoavailablewithreclocking

INPutSData rate NrZ 19.4 to 540Mbps

equalization automatic. cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps

impedance 75 ohm



connector bNc

gENERaL

Power +5V Dc / 3.5W Max.


ELECtRICaL OutPut

Number of outputs 1 per converter

connector bNc

impedance 75 ohm


Jitter max 0.2ui


Signal polarity Non inverting

OPtICaL OutPut

Transmission circuit fiber Single mode

light source F-P / DFb laser

Optical power -7.5dbm @1310nm, 0dbm (DFb laser)Optical centre 1310, 1550 or cWDM wavelength See page 153

Temp. range 0 to +40 °c

Jitter (ui=unit interval) 0.135 ui max. @ 270Mbps,



connector Sc/uPc

StaNdaRdS

Supported standards for electrical and optical ports:SMPTe 259M, SMPTe 297M, SMPTe 305.2M, SMPTe 310MDVb-aSi eN50083-9

SdI-EO-2


Equaliser

Bypass

SD/ASI Input 219.4-540Mbps SD/ASI

Output 219.4-540Mbps

SD/ASI Output 119.4-540Mbps

Equaliser

Bypass

SD/ASI Input 119.4-540Mbps

Optical Transmitter

OpticalOutput 2

Optical Transmitter

OpticalOutput 1

Optical converters


2.1

Bypass 177M/ASI

Reclocker

Bypass 177M/ASI

Reclocker


#2 x 2

Equaliser

Bypass

SD/ASI Input 219.4-540Mbps SD/ASI


SD/ASI Output 119.4-540Mbps

Equaliser

Bypass

SD/ASI Input 119.4-540Mbps

Optical Transmitter

OpticalOutput 2

Optical Transmitter

OpticalOutput 1

also available with reclocking(SDi-eO-2-rc)




SdI Optical to ElectricalConverter

•Highsensitivityreceiver• Built-indualoutputDistributionAmplifier•DVB-ASIcompatible• SMPTE259M/297Mcompliant

OPtICaL INPut Data rate optical 19.4Mbps – 540Mbps

Sensitivity SDi-Oe-S –20dbm typ.

SDi-Oe-l better than –30dbm typ. MF-Oe-S-Nrc –20dbm typ.

Maximum input power SDi-Oe-S -6dbm SDi-Oe-l 0dbm


Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible

return loss better than 40db w/Single mode fiber (typ.)

Detector overload threshold min. –6dbm, typ. –3dbm

connector Sc/uPc

gENERaL Power SDi-Oe-S and MF-Oe-S-Nrc

+ 5V Dc /1.7W

Power SDi-Oe-l +5V Dc/1.6W, -15V Dc/0.15W


SdI OutPut Number of outputs 2

connector bNc

impedance 75 ohm




Jitter (ui= unit interval) 0.2 ui max.

SdI-OE-S / SdI-OE-L / mF-OE-NRC

Optical Receiver SDI Input Processor

OpticalInput

2 x SDI Output19.4–540Mbps


Reclocker

dual SdI Optical to ElectricalConverter

•High-densitypackagingintheultracompact2RUframe•Highsensitivityreceiver• FullDVB-ASIcompatibility• Built-incrossoverallowingwavelengthswapand emergency switching• Re-clockerbypassfornon-videoformats• 2OutputDistributionAmplifier

OPtICaL INPutData rate optical 19.4 to 540MbpsSensitivity:for SDi (270Mbps) better than –30dbm

Detector overload threshold min. -6dbm




Detector damage threshold >+1dbm

connector Sc/uPc

gENERaLPower +5V Dc / 3.2W Max.


ELECtRICaL OutPutNumber of outputs 2 per converter

connector bNc

impedance 75 ohm


Jitter max 0.2ui



StaNdaRdS Supported standards for electrical and optical ports: SMPTe 292M, SMPTe 259M, SMPTe 297M, SMPTe 305.2M, SMPTe 310M, DVb-aSi eN50083-9

SdI-OE-2

OpticalInput 1

Bypass 177M/ASI

Reclocker

Bypass 177M/ASI

Reclocker


Optical receiver

OpticalInput 2

Optical receiver

#2 x 2

2 x ASI /2 x SD / HDOutput 119.4-540Mbps



Optical converters


2.1

Optical Converter and transponder

OPtICaL INPutData rate optical See table

SenSitiVityfor HD-SDi (1485Mbps) better than –20dbmfor SDi (270Mbps) better than –25dbmfor SDi (270Mbps) better than –30dbm a)

for SDH /SONeT (622Mbps) better than –25dbmfor SDH /SONeT (2488Mbps) better than –20dbmfor 1000baselX (1250Mbps) better than –25dbm



Transmission circuit fiber Single mode 9/125um

Transmission circuit fiber Multi mode 50/125um, single mode 9/125um compatible a)



connector Sc/uPc

OPtICaL OutPutTransmission circuit fiber Single mode 9/125um

light source (13T versions) F-P/DFb laser (-7.5dbm or 0dbm)

light source (DWDM/cWDM) DFb laser

Optical power 0dbm (optionally +5dbm for DWDM)

Optical centre wavelength for DWDM See page 153

Optical centre wavelength for cWDM See page 153

Max. wavelength drift +/- 0.16nm (DWDM)

Jitter (ui=unit interval) 0.135 ui max. @ 270Mbps, 0.2 ui max. @ 1485Mbps



connector Sc/uPc

gENERaLPower +5V Dc / 10W Max. 5W typically (DWDM)

+5V Dc / 3W typically (13T and cWDM)

Temperature range 0-40deg c (DWDM), 0-50degc (13T and cWDM)

control control system for access to setup and module status with biTe (built-in Test equip.)

ELECtRICaL INPutData rate NrZ 19.4 to 1485Mbps

Data rate NrZ 19.4 to 540Mbps a)

equalisation automatic. cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps.

impedance 75 ohm


return loss >15db @ 270MHz a)


connector bNc


connector bNc

impedance 75 ohm


Jitter max 0.2ui


Signal polarity 1 non inverting, 1 inverting

StaNdaRdSSupported standards for electrical and optical ports (Mr-Tr-2.5g, other versions see table):SMPTe: SMPTe 292M, SMPTe 259M, SMPTe 297M, SMPTe 305.2M,SMPTe 310M, DVb-aSi: eN50083-9additional supported standards for the optical ports, only opticaltransponder configuration:SDH / SONeT: STM1 / Oc3, STM4 / Oc12, STM16 / Oc 48gigabit ethernet: ieee 802.3, 1000baselX for SM fiberDWDM wavelengths iTu-T g.694.1cWDM wavelengths: iTu-T g.694.2

a) SDi

SdI-tR / SdI-tR-d15XX aNd SdI-tR-C1XXX / mR-tR-2.5g (Stm16 / OC48) / mR-tR-13t / mR-tR-d15XX.XX / mR-tR-C1XXX

•Multirateopticaltoopticaltransponderfor 19.4 – 2488Mbps

•O/E,E/Oconverter• 1550nm,CWDMandDWDMlaser

available • SupportsSDI,HD-SDI,SMPTE310M,

DVb-aSi, SDH/SONeT up to STM-16/Oc-48, gigabit ethernet and many other signal formats

• Performs3RRegeneration

3 x 1MUX

Optical Transmitter


SDH /1000BaseLX

CDROpticalInput

SD/HD/ASIInput

19.4–1485Mbps

HD/SD/ASICDR

Optical Receiver Input Processor

Equaliser

Bypass

Input / CDR Select

Bypass 177M / ASI

OpticalOutput

1 x ASI /2 x SD / HDOutput


The Mr-Tr-2.5g is a multi bit-rate converter and transponder module providing high performance media conversion for various signal formats from 19.4Mbps up to 2488Mbps. The unit can be configured as an electrical to Optical or Optical to electrical converter, or as an Optical to Optical Transponder. The unit provides a high sensitivity optical receiver and lasers 1310, 1550, cWDM and DWDM. unmatched signal accuracy, even in critical applications with pathological signal patterns makes the Mr-Tr-2.5g the first choice for all optical transport demands.

The Mr-Tr-2.5g can transport all HD and SD signal formats in addition to DVb-aSi and SMPTe 310M. it can perform optical refreshing, reclocking and wavelength swapping up to 2488Mbps.

The input sensitivity is typically better than –20dbm at 2488Mbps.

The open system platform of Network electronics DWDM multiplexing technology allows easy interoperability with third party fiber optical systems.

The electrical input is equipped with a multi rate cable equaliser providing an equalization of typically 100m of high quality coax cable at 1485Mbps. a distribution amplifier with 2 outputs reduces the need for additional Das (for DVb-aSi only one can be used).

ELECtRICaL PORtS OPtICaL PORtS

Digital video [Mbps]

gbe STM-1/Oc3

STM-4/Oc12

STM-16/Oc48

19.4-540 1483.5 1485

1250 155.52 622.08 2488.32

SDi-Tr X X X X

Mr-Tr X X X X X

Mr-Tr-2.5g X X X X X X

SuPPORtEd SIgNaL FORmatS




Optical Converter and transponder

mR-tR-3g

• Transmitterandreceiverinthesame module

– add and drop signals in a DWDM ring structure

• Fullframepopulationduetoreduced power consumption

– up to 8 modules per frame• 163G-SDIsignals(8ineach

direction) on the same fiber in just 2ru each end

•Upto403G-SDIsignalsonasingle fiber using DWDM

•Highsensitivityopticalreceiver

The Mr-Tr-3g for DWDM completes the second generation DWDM platform in the Flashlink range. The Mr-Tr-3g does everything the lower bit rate transponder modules do, and much more. The extremely low DWDM power consumption of the Mr-Tr-3g allows for up to 8 modules per 2ru frame. Mr-Tr-3g supports bi-directional signals, thereby allowing for full add/drop capabilities in a DWDM ring structure. Furthermore, the support of 3g-SDi (3gHD) single link underlines how powerful this module is. Mr-Tr-3g for

DWDM allows for up to 40 uncompressed 3g-SDi signals on a single strand of fiber. Sensitivity figures for HD-SDi with pathological signal patterns in the range of -30dbm means up to 50% extended reach compared to first generation Mr-Tr modules.

The open system platform of Network electronics DWDM multiplexingtechnology allows easy interoperability with third party fiber optical systems.

OPtICaL INPutData rate optical 19.4 to 2970Mbps

SenSitiVityfor 3g-SDi (2970Mbps) better than –25dbmfor HD-SDi (1485Mbps) better than –30dbmfor SDi (270Mbps) better than –30dbmfor SDH /SONeT (622Mbps) better than –30dbmfor SDH /SONeT (2488Mbps) better than –25dbmfor 1000baselX (1250Mbps) better than –30dbm





Detector damage threshold >0dbm

connector Sc/uPc


light source DWDM DFb laser


Optical centre wavelength for DWDM See page 153

Max number of ch. per fiber 40

channel spacing 100gHz

Max. wavelength drift +/- 0.16nm

Jitter (ui=unit interval) Max 0.2ui



connector Sc/uPc

gENERaLPower +5V Dc / 3W, +15V Dc/1.5W

control control system for access to setup and module status with biTe (built-in Test equip.)

ELECtRICaL INPutData rate Nrc 19.4 to 2970 Mbps

Data rate reclocked 270, 1483.5, 1485, 2967 and 2970 Mbps

equalisation automatic. cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps

impedance 75 ohm

return loss >15db, 5MHz – 1.5gHz >10db, 1.5gHz – 3gHz


connector bNc


connector bNc

impedance 75 ohm

return loss >15db, 5MHz – 1.5gHz >10db, 1.5gHz – 3gHz

Jitter (ui=unit interval) Max 0.2ui

Peak to peak signal level 800mV ±100mV


StaNdaRdSSupported standards for electrical and optical ports:SMPTe: SMPTe 292M, SMPTe 259M-c, SMPTe 297M, SMPTe424M, SMPTe 305.2M,

DVb-aSi: eN50083-9additional supported standards for the optical ports, only opticaltransponder configuration:SDH / SONeT: STM1 / Oc3, STM4 / Oc12, STM16 / Oc 48, STM16/Oc48 w/Fec (2670 Mbps)

gigabit ethernet: ieee 802.3, 1000baselX for SM fiber

3 x 1SWITCH

Optical Transmitter

SDH /1000BaseLX

CDROpticalInput

SD/HD/ASIInput

143–2970Mbps(Add 1)

HD/SD/ASICDR

Optical Receiver Input Processor

Equaliser

Bypass

Input / CDR Select

Bypass

OpticalOutput

2 x 1SWITCH

Distribution AmplifierHD/SD/ASICDR

Input / CDR Select

Bypass

1 x ASI /2 x SD / HDOutput



Optical converters


2.1

Hd-SdI Electrical to Optical Converter

• Built-indualoutputDistributionAmplifier•Highperformancelaserforthelonghaul•DVB-ASIcompatible• SMPTE259M/292Mcompliant

Hd-EO-13t/-15t

gENERaL Power

+5V Dc / 3W Max.



Single mode 9/125um

light source F-P laser

Optical power –7.5dbm or –3dbm @ 1310nm 0dbm @ 1550nm (DFb laser)

Optical centre wavelength 1310nm or 1550nm

Max. wavelength drift +/- 20nm @ temp. range 0 to +50 °c

Jitter (ui=unit interval) 0.135 ui max. @ 270Mbps 0.2 ui max. @ 1485Mbps




CWdm

gENERaLPower

+5V Dc / 3W Max.



Single mode 9/125um


Optical power 0dbm

Optical centre wavelength for cWDM See page 153

Max. wavelength drift ± 6nm





dWdm

gENERaLPower

+5V Dc / 10W Max. 5W typically


OPtICaL OutPutTransmission circuit fiber

Single mode 9/125um



Optical centre wavelength See page 153

Max. wavelength drift ± 0.16nm





Hd-EO-d15XX / Hd-EO-C1XXX / Hd-EO-13t/15t

Optical Transmitter

Equaliser

HD-SDI Input19.4-1485Mbps

2 x HD-SDIOutput

OpticalOutput


Reclocker


equalization automatic. cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps

impedance 75ohm



connector bNc

ELECtRICaL OutPut

Number of outputs 2

connector bNc

impedance 75 ohm


Jitter max 0.2ui



StaNdaRdS

Supported standards for electrical and optical ports: SMPTe 292M, SMPTe 259M, SMPTe 297M, SMPTe 305.2M, SMPTe 310M DVb-aSi: eN50083-9 DWDM: iTu-T g.694.1 cWDM: iTu-T g.694.2




dual Hd-SdI Electrical to Optical Converter

• High-densitypackagingintheultracompact2RUframe• 1310nm,1550nmandCWDMlaseravailable•Highperformancelaserforthelonghaul• FullDVB-ASIcompatibility• Built-incrossoverallowingwavelengthswapand

emergency switching•MultiformatRe-clocking


equalization automatic. cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps.

impedance 75 ohm



connector bNc




connector bNc

impedance 75 ohm


Jitter max 0.2ui


Signal polarity Non inverting



Optical power -7.5dbm @1310nm, 0dbm (DFb laser)

Optical centre wavelength 1310nm or 1550nm

Max. wavelength drift +/- 6nm

Temp. range 0 to +50 °c

Jitter (ui=unit interval) 0.135 ui max. @ 270Mbps, 0.2 ui max. @ 1485Mbps



connector Sc/uPc

StaNdaRdS Supported standards for electrical and optical ports: SMPTe 292M, SMPTe 259M, SMPTe 297, SMPTe 305.2M, SMPTe 310M DVb-aSi: eN50083-9

Hd-EO-2

Bypass 177M/ASI

Reclocker

Bypass 177M/ASI

Reclocker


#2 x 2

Equaliser

Bypass

SD/HD/ASI Input 219.4-1485Mbps SD/HD/ASI


SD/HD/ASI Output 119.4-1485Mbps

Equaliser

Bypass

SD/HD/ASI Input 119.4-1485Mbps

Optical Transmitter

OpticalOutput 2

Optical Transmitter

OpticalOutput 1


Optical converters


2.1

Hd-SdI Optical to Electrical Converter

•Highsensitivityreceiver• Built-inquad/dualoutputDistributionAmplifier•DVB-ASIcompatible• SMPTE259M/292Mcompliant•Multimodeversionavailable


SenSitiVity HD-SDi (1485Mbps) better than –20dbm HD-Oe-l better than –24dbm SDi (270Mbps) better than –25dbm HD-Oe-l better than –25dbm

Detector overload threshold Min. -3dbm





connector Sc/uPc

gENERaLPower +5V Dc / 3W Max.


ELECtRICaL OutPutNumber of outputs 4 (HD-Oe-l has 2 outputs)

connector bNc

impedance 75 ohm


Jitter max 0.2ui


Signal polarity 2 (1) non inverting, 2 (1) inverting


Hd-OE / Hd-OE-L

Optical receiver

OpticalInput

2 x HD-SDIOutput19.4-1485MbpsDistribution

Amplifier

2 x HD-SDIOutput19.4-1485Mbps

DistributionAmplifier

Reclocker

Optical receiver

OpticalInput

2 x HD-SDIOutput19.4-1485Mbps


Reclocker

dual Hd-SdI Optical to Electrical Converter

•High-densitypackagingintheultracompact2RUframe•Highsensitivityreceiver•DVB-ASIcompatible• Built-incrossoverallowingwavelengthswapand emergency switching• 2OutputDistributionAmplifier•MultiformatRe-clocking• Re-clockerbypassfornon-videoformats•Multimodeversionavailable


SenSitiVityHD-SDi (1485Mbps) better than –20dbm HD-Oe-l-2 better than –23dbm SDi (270Mbps) better than –25dbm






connector Sc/uPc




connector bNc

impedance 75 ohm


Jitter max 0.2ui




Hd-OE-2 / Hd-OE-L-2

OpticalInput 1

Bypass 177M/ASI

Reclocker

Bypass 177M/ASI

Reclocker


Optical receiver

OpticalInput 2

Optical receiver

#2 x 2



HD-Oe-l:




aES Electrical to Optical Converter

• TransportAESseparately• 1310,1550nmandCWDMversions• ElectricaloutputforuseinDWDMsystems

INPutSSignal format aeS-3 (aeS/ebu)

impedance 110 ohm (transformer balanced)

connector Db25 female (Tascam pin layout)


control rS-422 with protocol for use with gYDa-Sc System controller

control system has access to set-up and module status with biTe (built-in Test equipment)

OPtICaL OutPut Transmission circuit fiber Single mode 9/125um










connector Sc/uPc, return loss better than 40db

aES-EO-13t/15t

Slicing & Filtering

AESInput

OpticalOutput

Optical Transmitter

aES Optical to Electrical Converter

• TransportAESseparately•Multimodeorsinglemode• 1200-1620nminput

OutPutSignal format aeS-3 (aeS/ebu)

impedance 110 ohm (transformer balanced)

Jitter < 20ns

connector Db25 female (Tascam pin layout)


control rS-422 with protocol for use with gYDa-Sc System controller

control system has access to set-up and module status with biTe (built-in Test equipment)

OPtICaL INPutSensitivity better than –30dbm

Max. input power -3dbm

Optical wavelengths 1200-1620nm



aES-OE

Limiter

OpticalInput

AESOutput

Output Buffer

Optical Receiver


Time Division Multiplexers


2.1

SdI time division multiplexer

• 4-ChannelSDI/DVB-ASItimedivisionmultiplexer• ComplieswithSMPTE346M-2000standardforTDMof

video, audio, data over HD•Uninterruptedsignaltransportbylossofanyinputfeedat

transmitter (MuX)•Highperformanceopticsforshortandlonghaul

applications with cWDM laser option

ELECtRICaL INPutNumber of inputs 4 independent SD-SDi or DVb-aSi

Data rate 270Mbps

equalization automatic up to 225m typ.

impedance 75 ohm


connector bNc

OPtICaL OutPutOutput signal HD-SDi with TDM payload acc. to SMPTe

346M-2000



Optical power –7.5dbm @ 1310nm (F-P laser), 0 dbm (DFb laser)

Optical centre wavelength 1310nm, 1550nm, cWDM acc. to iTu-T g.694.2

Max. wavelength drift ±20nm (F-P lasers), ±6nm (DFb lasers)

Jitter (ui = unit interval) Max. 0.2ui @ 1485Mbps

connector return loss better than 40db w/ SM fiber

connector Sc/uPc

ELECtRICaL OutPutOutput signal HD-SDi with TDM payload acc. to SMPTe

346M-2000

Data rate 1485 Mbps

impedance 75 ohm


Jitter (ui = unit interval) Max. 0.2ui

Peak to peak signal level 0.8V ±0.1V

Signal polarity Non-inverting

connector bNc

gENERaLTemperature range 0 to +45 °c

Power consumption +5V/3.5 W, +15V/1.0W

control rS-422, gYDa-Sc enabled, SNMP

StaNdaRdSSupported standards for electrical and optical ports: SMPTe: SMPTe 346M-2000, SMPTe 292M, SMPTe 259M, SMPTe 305.2M, SMPTe 297M, SMPTe rP165 DVb-aSi: eN50083-9

SdI-td-muX-4

SDI/ASI270Mbps

OpticalOutput

ElectricalOutput

RemoteControl

Optical Transmitter

Equaliser

Reclocker

SDI/ASI270Mbps

Equaliser

Reclocker

SDI/ASI270Mbps

Equaliser

Reclocker

SDI/ASI270Mbps

Equaliser

Reclocker

Micro-controller

EDHHandling

4x4switch

1.485 GbpsHD-SDIoutputs

TDM-MUXSMPTE 346M-2000

SdI time division de-multiplexer

• 4-ChannelSDI/DVB-ASItimedivisiondemultiplexer• TransparenttoAESaudioordatasignalsinthevertical

ancillary data space• Built-inroutingswitcherprovideschannelswappingcapability•GYDA-SCenabledforremotecontrol•Multimodeavailable

ELECtRICaL INPutOutput signal HD-SDi with TDM payload according to

SMPTe 346M-2000

Data rate 1485 Mbps

equalization automatic up to 100m

impedance 75 ohm


Signal level Nom. 800mV

connector bNc

OPtICaL INPutinput signal HD-SDi with TDM payload according to

SMPTe 346M-2000

Sensitivity better than -25dbm

Detector overload threshold Min. -6dbm

Detector damage threshold > +1dbm


Transmission circuit fiber Single mode 9/125um Multi mode 50/125um (option)

connector return loss better than 40db w/ SM fiber

connector Sc/uPc

ELECtRICaL OutPutNumber of outputs 4 independent SD-SDi or DVb-aSi

Data rate 270Mbps

impedance 75 ohm


Jitter (ui = unit interval) Max. 0.2ui

Peak to peak signal level 0.8V ±0.1V

Signal polarity Non-inverting

connector bNc

gENERaLTemperature range 0 to +45 °c

Power consumption +5V/3.5 W, +15V /1.8W

control rS-422, gYDa-Sc enabled, SNMP

StaNdaRdSSupported standards for electrical and optical ports: SMPTe: SMPTe 346M-2000, SMPTe 292M, SMPTe 259M, SMPTe 305.2M, SMPTe 297M, SMPTe rP165 DVb-aSi: eN50083-9

SdI-td-dmuX-4

SDI/ASI270Mbps

1.485 GbpsOptical Input

1.485 GbpsElectrical Input

RemoteControl

ReclockerSign.

generator

SDI/ASI270MbpsReclocker

Sign.generator


Sign.generator


Sign.generator

Optical Receiver

Micro-controller

EDHHandling

4x4switch

1.485 GbpsHD-SDIinput

TDM-DMUXSMPTE 346M-2000

2x1Change-over

2x1switch

2x1switch

2x1switch

2x1switch


rF over Fiber Modules 2.1


L-band Electrical to Optical Converter

• Frequencyrange950–2150MHz• Remotelycontrolleddigitalgainandmanualgaincontrol

with gYDa-Sc system controller• Protocoltransparentbroadbandtransmission• F-typecoaxialconnector•Highperformanceopticsforshortandlonghaul

applications with cWDM laser option•Opticallinkbudgetupto25dB•GYDA-SCenabledforremotecontrol,statusmonitoring,

error reporting and SNMP support

RF CHaRaCtERIStICSFrequency band width 950-2150 MHz

return loss >10db

connector F-type

gain flatness ±1.5db over entire band ±0.25db at any 36 MHz

Maximum usable input signal < -5dbm

Maximum input signal without damage >+10dbm

inter modulation products < -55dbc with two carriers –20dbm input signal, 5db Fiber loss

link gain 40db

1db compression (output) 0dbm

Noise figure <10db

cNr >45db with maximum input power @ 36MHz

SFDr (typically -25dbm) >109dbc/Hz

OPtICaL CHaRaCtERIStICSWavelength 1310nm ± 10nm, 10 cWDM

channels ± 2nm 1290, 1310, 1330, 1350, 1470, 1490, 1510, 1530, 1550 and 1570nm

Transmission circuit fiber 9/125um single mode

connector Sc/Pc

Power output -3dbm, 0dbm, +3dbm

Other general standards for compliance with all products:

eMc eN 55103-1, 55103-2

gENERaLPower +5V Dc/3W, –15V Dc/1.5W,

+15V Dc/1.5W

ENvIRONmENtaL CONdItIONSOperation temp. range 0°c – 45°c

Operation without damage temperature range –10°c – 55°c

LB-EO

step attenuator

OpticalOutput

RemoteControl

L-band

LNBpowersupply

MonitorOutput

Micro-controller

Optical Transmitter

LNBcontrol

L-band Optical to Electrical Converter

• Frequencyrange950–2150MHz• Remotelycontrolleddigitalgainandmanualgaincontrol

with gYDa-Sc system controller• Protocoltransparentbroadbandtransmission• F-typecoaxialconnector•Highperformanceopticsforshortandlonghaul

applications with cWDM laser option•Opticallinkbudgetupto25dB•GYDA-SCenabledforremotecontrol,statusmonitoring,

error reporting and SNMP support

RF CHaRaCtERIStICSFrequency band width 950-2150 MHz

return loss >10db

connector F-type

gain flatness ±1.5db over entire band ±0.25db at any 36 MHz

Maximum output signal < -5dbm

inter modulation products < -55dbc with two carriers –20dbm input signal, 5db Fiber loss

link gain 40db

1db compression (output) 0dbm

NF (5db optical loss) <15db

cNr >45db with maximum input power @ 36MHz

SFDr (typically -25dbm) >109dbc/Hz

OPtICaL CHaRaCtERIStICSWavelength 1270-1610nm

Transmission circuit fiber 9/125um single mode

connector Sc/Pc

Maximum input power -6dbm

Other general standards for compliance with all products:

eMc eN 55103-1, 55103-2

environmental roHS, Weee

lNb control 22kHz compatible

gENRERaLPower +5V Dc/3W, –15V Dc/1.5W,

+15V Dc/1.5W

ENvIRONmENtaL CONdItIONSOperation temp. range 0°c – 45°c

Operation without damage temperature range –10°c – 55°c

LB-OE

step attenuator

ElectricalOutput950-2150MHz

RemoteControl

Optical ReceiverOptical

Input950-2150

MHz

MonitorOutput

LNBcontrol

Micro-controller


Datacom interfaces


2.1

Fast Ethernet Converter

• 1310,1550nmandCWDMlasers• ElectricaloutputforuseinDWDMsystems• Twoelectricalinputs•Onboardswitch• Sensitivitybetterthan–32dBm




connector return loss better than 40db


Max input power 0dbm

connector Sc/uPc











Max.reflected power 4%

connector Sc/uPc

EtHERNEt2 x 10baseT/100baseTx on rJ-45 connectors, compliant with ieee 802.3 and ieee 802.3u, speed auto sensing, auto MDi/MDi-X. also available with DWDM laser

gENERaLPower +5V Dc/4W and –15VDc/0.1W


EtH100

Optical Transmitter2 X10/100 MbpsTwisted PairEthernet

OpticalOutput

ElectricalOutput to DWDM Module

OpticalInput

Optical Receiver

EthernetSwitchw/1MbPacketBuffer

gigabit Ethernet media Converter

• 10BaseT/100BaseTx/1000BaseTautosensing,compliantwith ieee 802.3 and ieee 802.3u, auto MDi/MDi-X

• 1310nm,1550nm,CWDMlasers• ReceiversensitivityBetterthan-25dBm•CardedgeLEDsandGYDA-SCenabled• Lowpower(2W)•Multimodeversionavailable






Max input power –6dbm

connector Sc/uPc











Max.reflected power 4%

connector Sc/uPc

EtHERNEt10baseT/100baseTx/1000baseT on rJ-45 connectors, compliant with ieee 802.3 and ieee 802.3u, speed auto sensing, auto MDi/MDi-X

gENERaLPower +5V Dc / 2W


EtH1000

Optical Transmitter

10/100/1000 MbpsTwisted PairEthernet

OpticalOutput

OpticalInput

Optical Receiver

Physicalinterfaceethernet



rS-422 and gPi 2.1


RS-422 data transceiver

• Bi-directionalRS-422toopticalconverter• TransportsfromDCupto115.2kbps• Lowlatency• 1310nm,1550nmandCWDM• ElectricaloutputforuseinDWDMsystem

data INPutS aNd OutPutSSignal format rS-422

connector rJ-45

bit rate Dc up to 115.2kbps

latency 400ns maximum single direction latency including 1m of fiber. additional latency 5us/km of fiber.

gENERaLPower +5V Dc /2.4W

control rS-422 with protocol for use with gYDa-Sc System controller. control system has accessto set-up and module status with biTe (built-in Test equipment)


Max. input power –3dbm


Transmission circuit fiber Multi mode 50/125um,

Single mode 9/125um compatible














connector Sc/uPc

d-422

Optical Transmitter

RS422OpticalOutput

ElectricalOutput to optionalDWDM Module

OpticalInput

Optical Receiver

CODEC

RS-422 data transceiverwith gPI multiplexer

• 8xRS-422bi-directionaldatastreams• 16xGPIineachdirection• Verylowlatency•CWDMlasertypeisoptional• ElectricaloutputforuseinDWDMsystem

data INPutS aNd OutPutSSignal format 8 x rS-422

connector 4 x rJ-45

Signal format 16 x gPi / 16 x gPO

connector Db 25

bit rate Dc up to 115.2kbps

latency 400ns maximum single direction latency including 1m of fiber. additional latency 5us/km of fiber

gENERaLVoltage +5V Dc

control rS-422/4W with protocol for use with gYDa-Sc System controller. control system has access to set-up and module status with biTe (built-in Test equipment)


Max. input power -3dbm
















connector Sc/uPc

d-422-mg

Optical Transmitter

RS422(1)

RS422(8)

OpticalOutput

ElectricalOutput to optionalDWDM Module

OpticalInput

Optical Receiver

MultiplexerGPO(1)

GPO(16)

GPI(1)

GPI(16)

Occupies two slots


automatic Protection Switching and Optical Distribution


2.1

Wideband Optical Coupler

1x4 Wideband Optical Coupler

• Passiveopticalsplittermodule• 50/50or90/10splitratio• Formultipledistributionandlineartappedfiberbusses•Directivitybetterthan55dB

The WOc-4-25 is an all-optical Wideband Optical coupler suitable for signal distribution to up to 4 sites at the same time.

OPtICaLOptical wavelength 2nd and 3rd opt. window (1310nm and

1550nm)

Optical bandpass 1270-1350nm and 1510-1590nm


Directivity >55db

Transmission circuit fiber Single mode 9/125 um

connector Sc/uPc

Split ratios and insertion loss ratios incl. connector losses:WOc-2-50-50 50%/50% 4.3db/4.3db

WOc-2-90-10 90%/10% 1.4db/11.7db

gENERaL

Power None

control None

OPtICaLOptical passband 1260-1620nm

Split ratio 25%/25%/25%/25%

insertion loss with connectors Max 9db over passband Max 7.5db at 1310nm +/- 20nm and 1550nm +/- 20nm


connector Sc/uPc

return loss >40db typ w/SM fiber

Directivity >55db typ

gENERaL

Power None

control None

WOC-2-X-X

WOC-4-25

CommonOpticalFiber

OpticalFiber 1

X% of λ

(100 – X)% of λ OpticalFiber 2

Combiner/

Splitter

CommonOpticalFiber

OpticalFiber 1

25% of λ

OpticalFiber 2

25% of λ

OpticalFiber 3

25% of λ

OpticalFiber 4

25% of λ

Combiner/

Splitter


Optical switching and Wavelength Division Multiplexing 2.1


2x2 Wideband Optical Switch

•Opticalredundancyswitch•ContolledviaGPIalarminput,RS-422or gYDa-Sc control System• Tallyoutput• Latchingandnon-latchingversionavailable

OPtICaLOptical wavelength 1290-1620nm

insertion loss 1.4dbtyp, max 2.1db


cross talk <-80db

repeatability +/- 0.01db

Durability 10 000 000 cycles

Switching time 50ms typ.


connector Sc/uPc

gENERaLPower +5V Dc/ 1W


WOS-2X2

OpticalFiber 1

OpticalFiber 2

CommonOpticalFiber 1

CommonOpticalFiber 2

Power

Power

Power

Power

SPDT

Input 1

Input 2

Output 1

Output 2

Input 1

Input 2

Output 1

Output 2

2x2 SwitchMain Position

2x2 SwitchStandby Position

Wavelength division multiplexer

• Twochannelsperfiber• Bi-directionaltrafficonthesamefiber•Canbeusedasmultiplexerandde-multiplexer•High-isolationavailableonrequest

OPtICaLOptical wavelength 2nd and 3rd opt. window (1310nm or

1550nm)

Optical bandpass 1280-1335nm and 1525-1575nm

insertion loss < 2db

isolation > 17db

Directivity > 50db



connector Sc/uPc

gENERaLPower None

control None

Wdm-2

1310nm+1550nm

1310nm1 +

1

2

2

1550nm

WDM

Town A

Frame: FR-2RU-10-2

Modules: 1 x WDM-21 x SDI-EO-13T OdBm1 x SDI-EO-15T OdBm

Frame: FR-2RU-10-2

Modules: 1 x WDM-22 x SDI-OE-Sor 2 x SDI-OE-L

Example

Town B


Optical Multiplexing


2.1

by using the all-optical Wavelength Division

Multiplexing (WDM) technique, simultaneous

transport of multiple signals on the same

fiber is possible. a standard 2-channel

WDM solution enables transmission of two

independent signals on the same fiber.

both uni-directional and bi-directional

configurations are possible, as the direction

of any channel can be chosen to suit the

transport needs.

cWDM systems can be built with 8 channels

pr frame (upgradable to 16 ch.), or with 16

channels in one frame (requires dual optical

converters for SD/HD).

Systems incorporating DWDM are based on

the 8+1 architecture that has 8 channels per

frame + 1 upgrade port, thereby enabling

easy and cost efficient upgrade of capacity

on the fiber as the demand grows. Optical

multiplexers are available for systems with a

wavelength count up to 40.

To ensure maximum third party

interoperability, the wavelengths used in both

the cWDM as well as the DWDM systems are

selected according to the standards

iTu-T g.694.1 for DWDM and

iTu-T g.694.2 for cWDM.

Optical multiplexing is format and protocol

independent, so a mixture of different

signals on the different wavelengths is

straightforward. The only thing to bear in

mind is that higher bit rate means a shorter

maximum reach, and the optical budget

should be calculated carefully.

comparison of WDM technologiesFlashlink dense Wdm/Coarse Wdm dWdm (100gHz) CWdm

Max number of channels 40 16

Standard iTu-T g.694.1 iTu-T g.694.2

channel spacing 0.8nm 20nm

laser wavelength variation (0-40°c) ±0.16nm ±6.5nm

Optical amplification Yes, eDFa No

WDM channel Overview

Wavelength (nm)

Fiber

Atte

nuat

ion

1250 1300 1350 1400 1450 1500 1550 1600 1650

1310 1550

O-band E-band S-band C-band L-band U-band

2 chWDM

16 chCWDM

C-band

1530 1565

40 chDWDM

14701270 1550 1610

SMF

SMF – Single mode fiber, ITU-T G.652 A and BLWPF – Low water peak single mode fiber, ITU-T G.652 C and D

LWPF


Optical Multiplexing 2.1


Flashlink CWdm 1–8 and 9–16

Wavelength availability chart

acc. to iTu-T g.694.2

Wavelength [nm] Wavelength [nm]

channel 1–8 channel 9–16

1470 1270

1490 1290

1510 1310

1530 1330

1550 1350

1570 1370

1590 1390

1610 1410

Flashlink dWdm Wavelength availability Chart

acc. to Itu-t g.694.1

channel (#) center frequency (THz)

Wavelength (nm)

20 192.0 1561.41

21 192.1 1560.61

22 192.2 1559.79

23 192.3 1558.98

24 192.4 1558.17

25 192.5 1557.36

26 192.6 1556.55

27 192.7 1555.75

28 192.8 1554.94

29 192.9 1554.13

30 193.0 1553.33

31 193.1 1552.52

32 193.2 1551.72

33 193.3 1550.92

34 193.4 1550.12

35 193.5 1549.32

36 193.6 1548.51

37 193.7 1547.72

38 193.8 1546.92

39 193.9 1546.12

40 194.0 1545.32

41 194.1 1544.53

42 194.2 1543.73

43 194.3 1542.94

44 194.4 1542.14

45 194.5 1541.35

46 194.6 1540.56

47 194.7 1539.77

48 194.8 1538.98

49 194.9 1538.19

50 195.0 1537.40

51 195.1 1536.61

52 195.2 1535.82

53 195.3 1535.04

54 195.4 1534.25

55 195.5 1533.47

56 195.6 1532.68

57 195.7 1531.90

58 195.8 1531.12

59 195.9 1530.33




2.1

CWdm System

SPECIFICatIONSOperation temperature 0–40°c

Wavelengths See page 153



Max. reflected power 4%

connector common port Sc/uPc acc. to SMPTe-297M

connector common port (optional) Fc/Pc

OPtICaL FILtERINg, CHaNNELS 1-8 aNd 9-16

insertion loss any ch. (1-8) 5db max total for both ends (low loss: 4db)

insertion loss any ch. (9-16) 7db max total for both ends (low loss: 6db)

insertion loss per upgrade port 2.0db max

Tx-Tx directivity -55db

isolation adjacent ch. -25db

isolation any other ch. -35db

CWdm1–8 / CWdm9–16

The cWDM system is based on 8-channel optical filters. 1 upgrade

port for easy addition of more channels at a later stage. The

wavelengths are chosen according to the iTu-T g.694.2 standard in

order to ensure maximum interoperability.

The wavelengths of the signal cards must correspond to the

wavelengths of the optical filters, whereas the signal formats

running on those wavelengths can be chosen to suit the signal

transport needs.

CWDMchannel

9-16

CWDMchannel

1-8

Ch.9...

Ch.16

Ch.1...

Ch.8

Ch.9...

Ch.16

Ch.1...

Ch.8

16 independentchannels

optical fiber

CWDMchannel

9-16

CWDMchannel

1-8

CWDM

14701270 1550 161014701270 1550 1610


optical fiber


optical fiber

also available in low-loss version(cWDM1–8l and cWDM9–16-l)


Optical Multiplexing 2.1


8-channel dWdm filter with upgrade port

OPtICaL SPECIFICatIONSNumber of channels up to 40

available wavelengths See channel plan

connector Sc/uPc

insertion loss (one matched pair,

including connectors) 4.5db max

insertion loss (common to upgrade) 0.8db max

channel Spacing 100gHz

Passband +/- 15.0gHz

adjacent channel isolation 25db min

Non-adjacent channel isolation 40db min

Directivity 45db min

return loss 45db min

PDl 0.25db max

Operating Temperature 0 – 55 Oc

Storage Temperature -40 – 85 Oc

Optical Power 300mW max

dWdm-8C

• TheonlymodularDWDMsysteminthebroadcastmarketthatallowsthecustomer to grow to 40 DWDM channels, other system have a limit of 16 channels

• SameformfactorasCWDMallowsforincreasedframedensityofDWDMcards

• Initscategorythemostuptodatespecificationonthemarket• Passivedevice• Loweredinitialinvestmentcostyetstillprovidestheflexibilitytogrowin

the future

channel plan(product suffix)


Wavelength (nm)

1

20 192.0 1561.41

21 192.1 1560.61

22 192.2 1559.79

23 192.3 1558.98

24 192.4 1558.17

25 192.5 1557.36

26 192.6 1556.55

27 192.7 1555.75

2

28 192.8 1554.94

29 192.9 1554.13

30 193.0 1553.33

31 193.1 1552.52

32 193.2 1551.72

33 193.3 1550.92

34 193.4 1550.12

35 193.5 1549.32

3

36 193.6 1548.51

37 193.7 1547.72

38 193.8 1546.92

39 193.9 1546.12

40 194.0 1545.32

41 194.1 1544.53

42 194.2 1543.73

43 194.3 1542.94

4

44 194.4 1542.14

45 194.5 1541.35

46 194.6 1540.56

47 194.7 1539.77

48 194.8 1538.98

49 194.9 1538.19

50 195.0 1537.40

51 195.1 1536.61

5

52 195.2 1535.82

53 195.3 1535.04

54 195.4 1534.25

55 195.5 1533.47

56 195.6 1532.68

57 195.7 1531.90

58 195.8 1531.12

59 195.9 1530.33

Ch. 52...

Ch. 59


40 independent

optical fiber

optical fiber

Ch. 44...

Ch. 51

Ch. 36...

Ch. 43

Ch. 28...

Ch. 35

Ch. 20...

Ch. 27

Ch. 52...

Ch. 59

Ch. 44...

Ch. 51

Ch. 36...

Ch. 43

Ch. 28...

Ch. 35

Ch. 20...

Ch. 27

DWDM8C-1A

DWDM8C-2A

DWDM8C-3A

DWDM8C-4A

DWDM8C-5A

DWDM8C-1B

DWDM8C-2B

DWDM8C-3B

DWDM8C-4B

DWDM8C-5B


DWDM-8C

1A

DWDM-8C

5B

DWDM-8C

2A

DWDM-8C

4B

DWDM-8C

3A

DWDM-8C

3B

DWDM-8C

4A

DWDM-8C

2B

DWDM-8C

5A

DWDM-8C

1B

optical fiber

Wavelength (nm)

Fiber

Atte

nuat

ion

1250 1300 1350 1400 1450 1500 1550 1600 1650

1310 1550

O-band E-band S-band C-band L-band U-band

2 chWDM

16 chCWDM

C-band

1530 1565

40 chDWDM

14701270 1550 1610

SMF

SMF – Single mode fiber, ITU-T G.652 A and BLWPF – Low water peak single mode fiber, ITU-T G.652 C and D

LWPF


40-channel dWdm multiplexer and de-multiplexer

Dimensions 483x88x178mm (19”, 2ru)

channel spacing 100gHz within the c-band

Wavelengths according to iTu-T g.694.1

Passband iTu +/- 12gHz

insertion loss paired mux/demux 6db max

Pair uniformity on pairs shipped together 1.5db typ

adjacent ch. isolation 25db

Non-adjacent ch. isolation 40db min

Directivity 45db min

connector Sc/uPc


Polarisation Dependent loss 0.25 db max

Max power 300mW


uniform loss version for multi-stage eDFa application available on request.

dWdm-40C

C-band

1530 1565

40 chDWDM

E/O

E/O

E/O

E/O

Dig

ital S

igna

l In

Dig

ital S

igna

l Out40 independent

channels

optical fiber

E/O

E/O

E/O

E/O

Ch.1Ch.2Ch.3Ch.4

Ch.5Ch.6Ch.7Ch.8

Ch.9Ch.10Ch.11Ch.12

Ch.13Ch.14Ch.15Ch.16





Ch.1Ch.2Ch.3Ch.4

Ch.5Ch.6Ch.7Ch.8

Ch.9Ch.10Ch.11Ch.12






E/O


E/O


O/E

O/E

O/E

O/E

O/E

O/E

O/E

O/E


O/E


O/E

FlashlinkDWDM40 ch.DMUXframe

FlashlinkDWDM40 ch.MUXframe



2.1

Flashlink dWdm Wavelength availability Chart acc.

to Itu-t g.694.1

•C-band100GHzchannelspacingaccordingtoITU-TG.694.1–ensuresinteroperability with other standards-based DWDM systems

• Flatspectrum–theDWDM-40Cisidealforuni-directionalusewitherbium Doped Fiber amplifiers (eDFas)

• Thisall-opticaldevicefitsinastandardFlashlinkframe–nomaintenanceneeded, no power needed

• Signalscanbeuni-orbi-directional–supportsdigitalvideoandGigabitethernet running on different wavelengths

• Signalandbit-ratetransparent–SDI,HD-SDI,GigabitEthernetandSDH/SONeT run independently on separate wavelengths

The flagship of the optical transport platform is the 40-channel DWDM-system, allowing for up to 40 signals on a single strand of optical fiber. based on the standardised iTu-T g.694.1 channel spacing grid of 100gHz within the c-band, the 40-channel DWDM system has the same flexibility in signal formats and bit-rates as the 16-channel system using a channel spacing grid of 200gHz.

The optical filtering is placed in a separate 2ru-frame doing all the filtering needed to multiplex or demultiplex the channels involved. The filtering is always sold as a corresponding pair of two frames, one for each end of the fiber. This is due to the fact that the filters are designed as a pair in order to optimise the optical characteristics of the filters and minimise insertion loss.

The direction of any channel can be reversed so the system allows for maximum flexibility while designing your optical networks.

Please contact your local Network electronics’ sales representative to design the best solution for your needs.


Wavelength (nm)

20 192.0 1561.41

21 192.1 1560.61

22 192.2 1559.79

23 192.3 1558.98

24 192.4 1558.17

25 192.5 1557.36

26 192.6 1556.55

27 192.7 1555.75

28 192.8 1554.94

29 192.9 1554.13

30 193.0 1553.33

31 193.1 1552.52

32 193.2 1551.72

33 193.3 1550.92

34 193.4 1550.12

35 193.5 1549.32

36 193.6 1548.51

37 193.7 1547.72

38 193.8 1546.92

39 193.9 1546.12

40 194.0 1545.32

41 194.1 1544.53

42 194.2 1543.73

43 194.3 1542.94

44 194.4 1542.14

45 194.5 1541.35

46 194.6 1540.56

47 194.7 1539.77

48 194.8 1538.98

49 194.9 1538.19

50 195.0 1537.40

51 195.1 1536.61

52 195.2 1535.82

53 195.3 1535.04

54 195.4 1534.25

55 195.5 1533.47

56 195.6 1532.68

57 195.7 1531.90

58 195.8 1531.12

59 195.9 1530.33


eDFa 2.1


Erbium doped fiber amplifier – multichannel long-haul optical amplification

Dimensions 3 Flashlink slots

input range 1529-1562nm

Total optical input power -10dbm min, typ -6dbm

Total optical output power +17dbm, +/- 1.5dbm

gain flatness @23db gain 1.0db

Noise figure 6.0db max over full band

Polarisation dependent gain 0.5db max

Polarisation mode dispersion 0.5ps max

connector Sc/uPc

input/output return loss better than 35db

Power consumption +5V/9W max


EdFa-B-C 17dBm

The Flashlink eDFa family introduced at Nab 2007 will enable broadcasters to maximize their investment in a DWDM infrastructure by providing multichannel, all-optical amplification. The eDFa family consists of a booster/in-line amplifier and a low noise pre-amplifier.

The full-band eDFa boosts up to 40 DWDM-channels enabling the distance covered by fiber backhaul to be maximized and allowing broadcasters to upgrade their signal distribution from SD to HD over DWDM without needing to invest in infrastructure upgrades such as optical-to-electrical-to-optical in-line signal regeneration.

Such gains are even more impressive when eDFa technology is deployed in conjunction with the newly launching DWDM-40c.

Network electronics’ eDFa solution is extremely compact and extends the reach of the local network to remote locations, increasing functionality and lowering total cost of ownership. in addition, service providers offering traditional broadcast services over SDH/SONeT can now deploy Flashlink eDFas to increase the profitability and reach of their current infrastructure.

EDFA EDFA

• Full-bandEDFAcoversall40C-bandDWDMchannels(1528-1562nm)• Flatgainoverwholespectrum,Idealformultistageandfull-band

amplification• SDIOptimised,fullbroadcastperformance–transportspathologicalSDIand

HD-SDi signals without scrabling• Booster/in-lineandpre-ampversions• TheonlymodularEDFAavailable,Boosterandpre-amportwoin-lineEDFAs

in the same frame• Verycompact–occupies3slotsinaFlashlinkFR-2RU-10-2frame• Verylowpowerconsumption,only9W• ExtensiveparametermonitoringwithNetworkElectronicsGYDA-SC

controller• Enablespoint-to-pointtransportofupto40uncompressedHD-SDIsignalsat

long distances without electrical regeneration•Uni-directionaldevice• Signalandbit-ratetransparent


iP gateways


2.1

SdI tO IP gatEWay

• SDIoverGigabitEthernet/IP• IPprotocolinaccordancewithPro-MPEGCoP4• VariousForwardErrorCorrectionmodes,highQoS• Built-inframesynchronizerwithadvancedjittersuppression• TransparenttoembeddedAESaudioorotherancillarydata•Configurableastransmitterorreceiver• SeparatedmanagementEthernetportwithin-bandmanagementoption• UserfriendlyWEB/XMLbasedremotecontrol• EasyintegrationtoNMSsystemswithSNMPsupport

vIdEO INtERFaCESinput SDi (SMPTe 259M) /

SDTi (SMPTe 305M)

Output 2 x SDi (SMPTe 259M)

connector Female bNc

bitrate 270Mbps

SDi clock Options locked to input Signal genlock to external SDi input

NEtWORk INtERFaCESType 100/1000base-T ethernet

Protocols ieee802.3 ethernet rTP, arP, iPv4, igMPv2/3, TcP/uDP

connector rJ45 SFP Module

FEatuRESVideo encapsulation Pro-MPeg Forum cOP-4

Forward error correction: Pro-MPeg Forum cOP-4

CONtROL aNd maNagEmENtType 10/100 base-T

Features element control through HTTP/Web. SNMP traps for integration with Network Management System (NMS)

Protocol HTTP, XMl, SNMP v2

connector rJ45

alarm relay 9 pin D-Sub

Maintenance Port rS-232 9 pin D-Sub

Physical and Power

input Voltage 100-240V ac +/- 10%

input Voltage Option 48V Dc

Dimensions 1ru, ½-width 19’’ (WxDxH) 210x300x44.5mm (Two units in 19’’ 1ru rack space)

installation 19’’ rack mounting kit supplied

ENvIRONmENtaL CONdItIONS Operating Temperature 0°c - +50°c

Storage Temperature -20°c - +70°c

relative Humidity 5% to 95% (non condensing)

COmPLIaNCEce ce marked in accordance with

93/68/eec (22/07/03) Directive

ul Designed for ul approval

Safety iec60950 and eN60950

eMc eN55022, eN55024,eN6100-3-2

SdI-IP-gtW

The world market is going through a major change the way in which video content is moved around. The new way is by using the internet Protocol (iP) over Telco networks, a technology currently deployed on the internet and in corporate networks.

The scalable and cost-effective iP networks offer an inherent flexibility of bandwidth: 10Mbps, 100Mbps, 1gbps and 10 gbps. This technology enables new applications and opportunities, for instance low delay uncompressed video on SDi using 270Mbps, MPeg-2 bandwidths of 1-50 MMbps, MPeg-4 part10 (H.264/aVc)

SDi to iP gateway The award winning iPTV gateway (SDi-iP-gTW) solution allows real time transport of uncompressed SDi digital video via iP over Wide area Networks (WaN) where access to dark fiber or wavelengths is limited. like other products in the Flashlink family, the SDi-iP-gTW provides uncompromising video quality with no signal degradation. an advanced forward error correction mechanism in accordance with Pro-MPeg code-of-Practice #4 guarantees high quality of service.

aPPLICatION aREaS:• Professionalbroadcastcontribution• Videobackhaulsolutions• Liveeventcoverage

SDI IN

IN

ACTIVE

SDI OUT 1 SDI OUT 2

LED YELLOW : SDI INLED GREEN : ACTIVE

TEST

IP NetworkLive Sports

ProductionFacility

NetworkOperations

Center


iP gateways 2.1


Video Compression

SD/HD Video

ASI

ASI-IP-GTW

ASI-IP-GTW

ASI

Video Compression

ASI-IP-GTW

GigE

FastE

ASI-IP-GTW

Venue

Master Control / POP

aSI tO IP gatEWay

tRaNSPORt StREam INtERFaCESPorts 4 DVb aSi. Optional 8 DVb aSi

user configurable as inputs or outputs. license for 1,2,3,4 or 8 active ports


bitrate Max. 216Mbit/s

NEtWORk INtERFaCES Type 100/1000base-T ethernet


connector rJ45 SFP Module

tOtaL tRaNSPORt Stream rate Max. 450 Mbps

ethernet MTu length Max. 1500 bytes

StREam PROCESSINg TS encapsulation Pro-MPeg Forum cOP-3.

Forward error correction Pro-MPeg Forum cOP-3

TS Processing Transparent

CONtROL aNd maNagEmENtType 10/100 base-T

Features element control through HTTP/Web. XMl configuration import and export via HTTP. SNMP traps for integration with Network Management System (NMS)


connector rJ45


Maintenance Port rS232 Db9 male

PHySICaL aNd POWERinput Voltage 100-240V ac +/- 10%

input Voltage Option 48V Dc

Dimensions 1ru, ½-width 19’’ (WxDxH) 210 x 300 x 44.5mm (Two units in 19’’ 1ru rack space)


ENvIRONmENtaL CONdItIONS Operating Temperature 0°c - +50°c

Storage Temperature -20°c - +70°c


COmPLIaNCEce ce marked in accordance with 93/68/eec

(22/07/03) Directive

ul Designed for ul approval


eMc eN55022, eN55024,eN6100-3-2

aSI-IP-gtW

The aSi-iP-gTW provides a gateway solution for the transmission of compressed digital video content over iP networks. being a member of the Flashlink product portfolio, the aSi-iP-gTW allows broadcast quality contribution and distribution of DVb aSi over local area, Metropolitan and Wide area Networks.

aSi to iP gateway The unit allows carrying of up to 8 DVb aSi transport streams over a gigabit ethernet connection. Forward error correction in accordance with Pro-MPeg code-of-Practice 3 increases robustness against packet loss and guarantees high quality of service. The aSi-iP-gTW handles transport streams carrying MPeg-2, MPeg-4 (H.264) and Vc.1 standard and high definition compressed video.

aPPLICatION aREaS:• Professionalbroadcastdistribution• Professionalbroadcastcontribution• Liveeventcoverage

SDI IN

IN

ACTIVE

SDI OUT 1 SDI OUT 2


TEST

•DVBASIover100Base-Tor1000Base-TEthernet• TransportstreamencapsulationinaccordancewithPro-MPEGCoP-3• FlexibleForwardErrorCorrectioninaccordancewithPro-MPEGCoP-3•Upto8DVB-ASItransportstreamsin½19”1RU•Configurableastransmitterorreceiver• SeparatedmanagementEthernetportwithin-bandmanagementoption•UserfriendlyWEB/XMLbasedremotecontrol• EasyintegrationtoNMSsystemswithSNMPsupport


iP gateways


2.1

SdI tO IP gatEWay – JPEg2000

•Highqualityvideo• JPEG2000compression• 10bitvideo• Intraframeencoding• RobusttransmissionofSDIsignals• FlexibleForwardErrorCorrection• Errorconcealment• Verylowdelay• Encodinganddecodingdelaylessthan100ms• Ancillarydatasupport• Transparenttransferofembeddedaudioandverticalancillarydata•Compact,cost-effectivesolutions•Completetransmitter/receiverin1RU•Userconfigurableastransmitterorreceiver•User-friendlyconfigurationandcontrol•WEB/XMLbasedremotecontrol• EasyintegrationtoNMSsystemswithSNMPtrapsupport• SoftwareupgradeabletoHD

vIdEO INtERFaCESinput SDi (SMPTe 259M)

Output SDi (SMPTe 259M) 2 main and 1 test outputs


SDi clock locked to external SDi input

NEtWORk INtERFaCESType 100/1000base-T ethernet


connector rJ45 SFP Module (Option)

vIdEO ENCOdINgVideo encoding JPeg2000

iP encapsulation MXF over rTP

iP bitrate 5 to 100 Mbps

Forward error correction Forward error correction based on Pro-MPeg Forum coP-4 Fec

RESOLutIONSEBUTech.3267-E,2ndedition;625lines,50fields/s

SMPTe 125M-1995 525 lines, 59.94 fields/s

audIO aNd aNCILLaRy dataaudio formats embedded audio (SMPTe 272M)

uncompressed, 16 channels, 20 bit

Data formats ancillary data (SMPTe 291M-1998) Transparent

audio/video delay +/- 1 line

CONtROL aNd maNagEmENtType 10/100 base-T ethernet

Features element control through HTTP/Web. XMl SNMP traps for integration with Network Management System (NMS). SNMP control.


connector rJ45


Maintenance Port rS232 9 pin D-Sub

PHySICaL aNd POWERinput Voltage 100-240V ac +/- 10%

input Voltage Option -48V Dc

Dimensions 1ru, ½-width 19’’ (WxDxH) 210 x 300 x 44.5mm. Two units in 19’’ 1ru rack space


ENvIRONmENtaL CONdItIONS Operating Temperature 0 °c – +50 °c

Storage Temperature -20 °c – +70 °c


COmPLIaNCE ce 73/23/eec (low voltage equipment)

89/336/eec (electromagnetic compatibility)

cSa Designed for cSa approval


eMc eN55022, eN55024, eN6100-3-2

SdC-IP-gtW

The SDc-iP-gTW provides JPeg2000 compression of SDi signals, allowing cost-effective transmission of high quality TV signals over ethernet links.

aPPLICatION aREaS:• BroadcastcontributionwithEthernetconnectivity• Studio-to-studiomediaexchange• In-housesignaldistributionandrouting• Post-production• Liveeventcoverage

SDI IN

IN

ACTIVE

SDI OUT 1 SDI OUT 2


TEST


iP gateways 2.1


Hd-SdI tO IP gatEWay – JPEg2000

vIdEO INtERFaCESinput HD-SDi (SMPTe 292M)

SD-SDi (SMPTe 259M)

Output HD-SDi (SMPTe 292M) 2 main and 1 test outputs


SDi clock locked to external SDi input (SD/HD)

NEtWORk INtERFaCES Type 100/1000base-T ethernet


connector rJ45 SFP Module (Option)

vIdEO ENCOdINg Video encoding JPeg2000

iP encapsulation MXF over rTP

iP bitrate 25 to 200 Mbps

Forward error correction Forward error correction based on Pro-MPeg Forum coP-4 Fec

Hd RESOLutIONSSMPTe 274M-2003 System 5 1920 x 1080/59.94/iSMPTe 296M-2001 System 2 1280 x 720/59.94SMPTe 274M-2003 System 6 1920 x 1080/50/iSMPTe 296M-2001 System 3 1280 x 720/50SMPTe 274M-2003 System D 1920x1080/24/PsF

audIO aNd aNCILLaRy data audio formats embedded audio (SMPTe 299M-1997)

uncompressed, 16 channels, 20 bit

Data formats ancillary data (SMPTe 291M-1998)

CONtROL aNd maNagEmENt Type 10/100 base-T ethernet

Features element control through HTTP/Web. XMl SNMP traps for integration with Network Management System (NMS). SNMP control.


connector rJ45


Maintenance Port rS232 9 pin D-Sub

PHySICaL aNd POWER input Voltage 100-240V ac +/- 10%

Dimensions 1ru, ½-width 19’’ (WxDxH) 210 x 300 x 44.5mm. Two units in 19’’ 1ru rack space


ENvIRONmENtaL CONdItIONS Operating Temperature 0 °c – +50 °c

Storage Temperature -20 °c – +70 °c


COmPLIaNCE ce 73/23/eec (low voltage equipment)

89/336/eec (electromagnetic compatibility)

cSa Designed for cSa approval


eMc eN55022, eN55024, eN6100-3-2

HdC-IP-gtW-C/-d

The HDc-iP-gTW provides a gateway solution for the transmission of JPeg 2000 compressed HD-SDi content over iP networks. The HDc-iP-gTW is available as a encoder/decoder (codec, -c version) and as a cost effective decoder only version.

The HDc-iP-gTW is a multi rate video gateway and will auto-sense SD or HD bit rates.

aPPLICatION aREaS:• ProfessionalbroadcastcontributionwithEthernetconnectivity• Studio-to-studiomediaexchange• In-housesignaldistributionandrouting• Post-production• Liveeventcoverage

SDI IN

IN

ACTIVE

SDI OUT 1 SDI OUT 2


TEST

•HighqualityvideousingJPEG2000compression• RobusttransmissionofHDTVsignals• Verylowdelay• Ancillarydatasupport• Compact,cost-effectivesolutions• User-friendlyconfigurationandcontrol• AutosensingSD/HD• ForwardErrorCorrection•Codecversion(-C)anddecoderonly(-D)version


Modules for desktop and stand alone applications have until now

been associated with medium-low to medium-high performance with

little or no reconfiguration possibilities. Well, those days are gone.

INtERCHaNgEaBLE mOduLES– initial cost savings combined with a future proof upgrade path

With Flashlink Micro, Network electronics introduces the industry

standard Flashlink modules fitted in a compact and cost-effective

housing for stand alone applications. as regular Flashlink modules are

used in the Flashlink Micro series it is no longer a trade off between

form factor and module performance, the best of both worlds can

finally be realised with Flashlink Micro.

mINImum SEtuP tImEFlashlink Micro comes with an in-line brick power supply (redundant

power optional, brick or rack-mount) so all you need is to connect

signal- and power cables and the self-contained box is up and

running with full broadcast quality in no time.

mONItORINg aNd CONFIguRatION control features like on board status leD’s and gPi interface as well as

rS-422 interface for gYDa-Sc control is standard on all modules.

re-configuration of the module is easily done with DiP-switches on

the module itself or via the gYDa-Sc system controller for Flashlink.

FLEXIBLE mOuNtINgVarious mounting options are available for increased mounting

flexibility:

• 1RUTrayfor4FlashlinkMicromodules

• Wallmounting

• Ontablemounting

• Underthetablemounting

• Angledwall-,on-table-andunder-the-table-mounting

• StackingofFlashlinkMicromodules

maXImum FuNCtIONaLItyThe comprehensive Flashlink Micro range covers a wide variety of

functions:

• AudioandVideoconversion,processingandsynchronisation

• Distributionamplifiers

• FiberconversionofSDIandHD-SDIsignals

• Embedding/de-embedding

• DatacomInterfaces

• Automaticchangeovermodulesforredundancy

LOW POWER CONSumPtION all Flashlink Micro modules are designed with low power

consumption in mind.

RuggEdIzEd ENCLOSuRE dESIgNThe combination of high reliability design philosophy and the

ruggedized enclosure design, means you can enjoy Flashlink Micro for

many years.

FutuRE PROOF uPgRadE PatHSince the boards and back planes of Flashlink Micro are the same

as in the Flashlink 2ru modular frame holding up to 10 modules,

the roadmap to future system expansion is crystal clear and straight

forward. interchangeable boards means that all modules in Flashlink

Micro automatically are compliant with relevant broadcast standards,

as is the case for the Flashlink 2ru modular system.

in the next few pages you can see for yourself that Flashlink Micro

meets or exceeds your expectations to modules for desktop or stand-

alone applications.

Flashlink Micro

FlaSHliNK MicrO

2.1

Flashlink Micro, your ideal choice for desktop applications– High performance video/audio processing and fiber optics made simple

Distribution amplifiersembedders / De-embeddersVideo convertersaudio convertersSynchronisation Modulesautomatic changeover ModuleseO and Oe convertersDatacom interfaces

One Flashlink card

+ One in-line power supply

+ One N-Box

= Flashlink micro


Distribution amplifiers 2.1

FlaSHliNK MicrO

SdI distribution amplifier

• SDI/AES-3idsupport• Automaticbitratedetection•On-boardcableequaliser•Non-videobitratesupport

in: 1 – Out: 8

Fm-da-SdI

analog video multisignal distribution amplifier

•DCto200MHzanalogvideo• 6non-invertingoutputs• AlsosuitableforSDIaccordingtoSMPTE-259M

in: 1 – Out: 6

Fm-da-va

dual digital audio distribution amplifier

•Digitalaudiodistributionamplifier•ConfigurableasDual1x4orSingle1x8• Reportssignalpresence• Supportssampleratefrom15to96kHz• Supportsbitratefrom16kbpsto14Mbps

in: 1 or 2 – Out: 8 or 2x4

Fm-da-aES

dual analog audio distribution amplifier

• Analogaudiodistributionamplifier• Precisiongainsettingsfor-12to+12dB• Allowsmixingof2inputsindual1x4mode• ForbalancedACsignalsfrom3.3Hzto400kHz

in: 2 – Out: 8

Fm-da-aa

SdI distribution amplifier w/monitoring Output

• 8-bitcompositeencoderandDA• 3SDIand3compositeoutputs• Automaticstandardsdetection• EDHmonitoring

in 1Out 3 re-clocked SDi and 3 NTSc/Pal composite

Fm-daC-mON

More details, see page 113

More details, see page 113More details, see page 114




embedders / De-embedders

FlaSHliNK MicrO

2.1

digital audio Embedder

• 4-channel24-bitAES(8monoaudio)audio embedder

• Automaticinsertionofsamplerateconverters• EDHinaccordancewithSMPTE-RP165• Embeddinginacc.withSMPTE-272Mgiving

maximum compatibility to 3rd party products• TransformerbalancedAESin-andoutputs• Allowsexternalsamplingratesfrom16-144kHz w/Src enabled•Canbeusedas4-CHembedder,4-CH

de-embedder or 2-cH de-embedder/embedder • 110ohmbalancedand75ohmunbalalancedversion

available•Optionalwithopticaloutput(AV-MUX-13T)

Fm-av-muX, Fm-av-muX-13t

digital audio de-embedder

• 4-channel24-bitAES(8monoaudio)audio de-embedder• EDHinaccordancewithSMPTE-RP165•De-embeddinginacc.withSMPTE-272Mgiving maximum compatibility to 3rd party products • TransformerbalancedAESoutputs• 110ohmbalancedand75ohmunbalanced version available•Optionalwithopticalinput(AV-DMUX-R)

Fm-av-dmuX, Fm-av-dmuX-R



analog audio Embedder

• 4channelanalogaudioembedder• 24bitconverters107dB(A)typicaldynamicrange•Cascadableforadditionalaudiochannels•GainadjustmentswithDIPswitches• EDHinsertionandhandling• 20or24bitembedding•Optionalwithopticaloutput(AAV-MUX-13T)

Fm-aav-muX, Fm-aav-muX-13t

analog audio de-embedder

• 4channelanalogaudiode-embedder• 24bitconverters106dB(A)typicaldynamicrange•Cascadableforadditionalaudiochannels•GainadjustmentsonDIPswitches• EDHinsertionandhandling•Optionalwithopticalinput(AAV-DMUX-R)

Fm-aav-dmuX, Fm-aav-dmuX-R






Signal Processing and Synchronisation 2.1

FlaSHliNK MicrO

NtSC/PaL to SdI decoder

• 10-bitcompositetoSDIdecoder

• Automaticstandardsdetection

• EDHandfield1IDinsertion

• 2xoversampling(27MHz)

• Analoginputsw/loop-through,3SDIoutputs

• 3-lineadaptivecombfiltersandselectablefiltersettings

Fm-adC-SdI

video a/d Converter and decoder

• 10-bitcomponent,compositeorY/CtoSDIconverter

• Built-invideoPROC-AMP

• 3SDIoutputs

• 5lineadaptivecombfilterandselectablefiltersettings

• Automaticstandardsdetection

• EDHandfield1IDinsertion

Fm-adC-SdI-CC



SdI to NtSC/PaL Encoder and d/a Converter

• 10-bitSDItocompositeencoderand10-bitSDItocomponent converter in one product

• Built-inframesynchronizerw/sub-carrierandhorizontalphase adjustment

• Largeframebuffer(4frames)

• EDHmonitoring

• 4xoversampling(54MHz)

• SDIinputw/loop-through,4analogoutputs

Fm-daC-SdI


dual audio d/a Converter

• 24-bithighperformanceAEStoanalogaudioconverter

• Twoindependentconvertersononeboard

• Typicaldynamicrangeof120dBA

• TransformerbalancedAESinputs

• Allowssamplingratesfrom32–96kHz

Fm-daC-aES


dual audio a/d Converter

• 24-bithighperformanceanalogaudiotoAESconverter

• Twoindependentconvertersononeboard

• Typicaldynamicrangeof117dBA

• TransformerbalancedAESoutputs

• Internalsamplingrates44.1,48and96kHz


Fm-adC-aES


dual aES audio delay

• 2independentaudiodelaysignalpaths

• Built-insamplerateconverteraccepting32,41.1,48kHz

• Black-burstandAES-11referenceinput

•Upto10sdelayat48kHz

• Simultanousfixeddelayandexternallyswitchabledynamicdelay

•DelaytrackinginputforsynchronisationwithDAC-SDI,FrS-SDi or other video devices

• 2AESoutputsperdelayline

• TransformerbalancedAESin-andoutputs

Fm-dLy-aES


SdI Frame Synchronizer

• SDI10bit4:2:2framesynchronizerwithembeddedaudiohandling

• AnalogBlackBurstgenlock• Selectablefreezeonlastgoodframeorblackvideoonerror

or on loss of input signal• EDHinsertionandhandlinginaccordancewithSMPTE-

rP165•Widedelayrange,from128usupto232ms(Sample,H

and V adjustment)• Audiodelaytrackingoutput• SDI4:2:2inputwithoneactiveloop-throughoutput• 3xSDI4:2:2synchronizedoutputs• Automaticdetectionof525-and625-lineformatinput

Fm-FRS-SdI


SdI Line Synchronizer

• SDI10bit4:2:2linesynchronizer• AnalogBlackBurstgenlock• EDHinsertionandhandlinginaccordancewithSMPTE-

rP165• SDI4:2:2inputwithoneactiveloop-throughoutput• 3xSDI4:2:2linesynchronizedoutputs• Automaticdetectionof525-and625-lineformatinput

Fm-LIS-SdI


Hd Change-over

•Multi-ratechange-over

•Non-broadcastdataratesalsosupportednon-reclocked

• Autochange-overonsignallossorreclockerror

•Configurablechangebacklogic

• Reportssignallossandbitrate

•GPIcontrolandalarms

• IntegratedDAwith4re-clockedHD/SDIoutputs

Fm-HdSdI-CHO-2X1


SdI Change-over

• SDIchange-over

•Non-broadcastdataratesalsosupportednon-reclocked

• Autochange-overonsignallossorreclockerror

•Configurablechangebacklogic

• Reportssignallossandbitrate

•GPIcontrolandalarms

• IntegratedDAwith4re-clockedSDIoutputs

• 2inverted/2non-invertedforDVB-ASI

Fm-SdI-CHO-2X1



Optical converters

FlaSHliNK MicrO

2.1

SdI Electrical to Optical converter

• 1310nmSinglemode• Built-indualoutputDistributionAmplifier•Highperformancelaserforthelonghaul•DVB-ASIcompatible• SMPTE259M/297Mcompliant

Fm-SdI-EO-13t


dual SdI Electrical to Optical converter

• 1310nm–7.5dBmF-Plaser•High-densitypackagingintheultracompact2RUframe•Highperformancelaserforthelonghaul• FullDVB-ASIcompatibility• Built-incrossoverallowingwavelengthswap and emergency switching• ActiveloopedSDIoutput

Fm-SdI-EO-2-13t


SdI Optical to Electrical converter

• Sensitivity-20dBm•Max.input-6dBm•Highsensitivityreceiver• Built-indualoutputDistributionAmplifier•DVB-ASIcompatible• SMPTE259M/297Mcompliant

Fm-SdI-OE-S


dual SdI Optical to Electrical converter

• Sensitivity-20dBm•Max.input-6dBm•Highsensitivityreceiver• Built-indualoutputDistributionAmplifier•DVB-ASIcompatible• SMPTE259M/297Mcompliant

Fm-SdI-OE-2


Hd-SdI Electrical to Optical converter

• 1310nmSinglemode• Built-indualoutputDistributionAmplifier•Highperformancelaserforthelonghaul•DVB-ASIcompatible• SMPTE259M/292Mcompliant

Fm-Hd-EO-13t


dual Hd-SdI Electrical to Optical converter

• 1310nmSinglemode• –7.5dBmF-Plaser• High-densitypackagingintheultracompact2RUframe•Highperformancelaserforthelonghaul• FullDVB-ASIcompatibility• Built-incrossoverallowingwavelengthswap and emergency switching•MultiformatRe-clocking

Fm-Hd-EO-2-13t


Hd-SdI Optical to Electrical converter

•Highsensitivityreceiver• Built-inquadoutputDistributionAmplifier•DVB-ASIcompatible• SMPTE259M/292Mcompliant

Fm-Hd-OE


dual Hd-SdI Optical to Electrical Converter

•High-densitypackagingintheultracompact 2ru frame

•Highsensitivityreceiver• FullDVB-ASIcompatibility• Built-incrossoverallowingwavelengthswapand emergency switching• 2OutputDistributionAmplifier•MultiformatRe-clocking• Re-clockerbypassfornon-videoformats

Fm-Hd-OE-2


dual SdI Optical to Electrical converter


Datacom interfaces 2.1

FlaSHliNK MicrO

Fast Ethernet Converter

• Transmitterandreceiverononecard• 1310nm-7.5dBmF-Plaser• Twoelectricalinputs•Onboardswitch• SensitivityBetterthan-32dBm

Fm-EtH100-13t


gigabit Ethernet media Converter

• Transmitterandreceiverononecard• 10BaseT/100BaseTx/1000BaseTautosensing,compliant

with ieee 802.3 and ieee 802.3u, auto MDi/MDi-X• 1310nm-7.5dBmF-Plaser• Receiversensitivitybetterthan-25dBm•CardedgeLEDsandGYDA-SCenabled• Lowpower(2W)

Fm-EtH1000-13t


Flashlink Micro accessories

1ru shelf for up to 4 x N-bOX, including 3 front panels for empty slots

N-BOX-CaBLE

cable for centralized powering of 4 x N-bOX, includes break-out for gYDa-Sc control interface

Cable

N-BOX-SH1Ru

1Ru Shelf

Mounting plate for N-bOX, allows wall, on-table, under-table mounting, complete with screw set

N-BOX-PL1

mounting Plate

angled mounting plate for N-bOX, allows wall, on-table, under-table mounting, complete set with 2 plates and screws

N-BOX-PL2

angled mounting Plates

interconnecting plate for N-bOX, allows stapling of N-bOXes, complete set with 2 plates and screws

N-BOX-PL3

Interconnecting Plate

y-CaBLE

Y-cable – combine two power supplies for redundancy

Cable


compact Distribution amplifiers

1ru cOMPacT DiSTribuTiON aMPliFierS

2.1

video Equalising distributor1x6 dual

SPECIFICatIONFrequency response 0–25MHz –3db

Differential gain < 0.2%

Differential phase < 0.2°

Video S/N ratio > 70db, 100kHz – 5MHz, unweighted

gain –1.8db to +4db

Number of inputs 2 looped, balanced

return loss > 40db to 10MHz

Number of outputs 2x6

impedance 75 ohm

Max signal 2 Vp-p

equalization 0–300m rg59u or equiv.

connector bNc

ac power external power supply 100–260Vac (included)

Dc power ±5V, connector Db9 male

Dimensions 483x44x45 mm (19”, 1ru)

v0106dEq

•Dual1x6Video•Differentialinputs•Equalizationforupto300mcable•Gainrange–1.8dBto+4dB•>25MHzBandwidth•ExternalDCcontrol

Serial digital distributor1x6 quad

SPECIFICatIONData rate 143Mbps–270Mbps

Min. signal level 0.25 nom.0.8V

Max. signal level 4.5V

Number of inputs 4 looped


impedance 75 ohm

Signal processing none

connector bNc




SdI0106q

•Quadruple1x6SDI•D14:2:2270Mbpscomponent•D2177MbpsPALcomposite•HighperformanceBroadcastQuality


2.1


analog video audio distributor1x10

audIOFrequency response 20Hz–100kHz ±0.1db

crosstalk > –100db

THD+N < 0.003%

SNr > 90db ref. to 0db 20Hz–20kHz

Number of inputs 1 looped (stereo)

input impedance 47 k ohm

Max. input level +22dbu

Number of outputs 10 (stereo)

Output impedance 66 ohm

connector rca

vIdEOFrequency response 0-80MHz –3db

Differential gain < 0.07% (3.58/4.43MHz)

Differential phase < 0.1° (3.58/4.43MHz)


gain 0db, ±0.1db


Number of outputs 10

impedance 75 ohm

return loss > 40db

Max signal 2 Vp-p

coupling Dc

connector bNc




av0110

•1x10Video/Audio•100kHzAudioBandwidth•80MHzVideoBandwidth•BroadcastSpecification•Studio,CCTV,Duplication

analog Stereo audio distributor1x8 dual

SPECIFICatIONFrequency response 20Hz–100kHz ±0.1db

crosstalk > –100db

THD+N < 0.003%

SNr > 90db ref. to 0db 20Hz–20kHz

Number of inputs 4 mono (2 stereo)

input impedance > 10 k ohm

Max. input level +23dbu

Number of outputs 4x8 mono (2x8 stereo)

Output impedance > 66 ohm


gain adjustment ± 6db

unbalanced inputs 4 mono

input impedance 47 k ohm





a0108dS

•Dual1x8Stereo•100kHzAudioBandwidth•Balancedinputsandoutputs•Additionalunbalancedinputs•Broadcastspecification



analog video distributor1x6 quad

SPECIFICatIONFrequency response 0–500MHz –3db

Differential gain < 0.07%

Differential phase < 0.22°


gain 0db, ±0.1db



impedance 75 ohm

return loss > 40db

Max signal 2 Vp-p

coupling Dc

connector bNc




v0106q

•Quadruple1x6Video•PAL,NTSC,HDTV,YC,SVGA,RGBS•500MHzVideoBandwidth•HighperformanceBroadcastQuality

quadruple digital audio aES/EBu distributor

SPECIFICatIONSignal type aeS/ebu digital audio (Stereo)

balanced inputs 4x transformer coupled aeS3-110

Signal amplitude 0,2 – 7Vp-p

connector Db25 female, impedance 110 ohm

unbalanced inputs 4x 75 ohm 1Vp-p unbalanced coax, SMPTe 276M

Signal amplitude 100mVp-p to 1Vp-p

connector rca, impedance 75 ohm

Outputs 4x8 aeS3-110

Signal amplitude 4Vp-p ± 1Vp-p

connector Db25 female, impedance 110 ohm

Jitter 0.7ns

Sampling rates 32 – 48kHz


Dc power +5V, connector Db9 male


ad0108q

•Quadruple1x8AES/EBUdistributor•AES3,AES-3id/S/PDIFinput•48kHzcompatible•Lowjitterspec



2.1


2.1


Flashlink accessories

SINgLE mOdE PatCH CORdS

Order no. Description:

Sc/SPc-1 Sc Patch cord 1m



Sc/uPc-Fc/Pc-1 Sc-Fc Patch cord 1m

Sc/uPc-Sc/aPc Sc/aPc Patch cord

(8O cut angle) 1m

Other lengths or multi mode patch cords on

request

PIgtaILS

Order no.:

Sc/uPc Pigtail 1m

Sc/uPc Pigtail 2m

Sc/uPc Pigtail 3m

attENuatORS

Order no.:

Sc-attenuators 5db

Sc-attenuator 10db

CLEtOP – FIBER CLEaNINg


cleTop For cleaning your

Fiber connections

cleTop Tape Spare tape for cleTop

Cat5 – CaBLES


caT-5/SerPort-1 m cable connection

Frame to Pc

OtHER aCCESSORIESOrder no. Description

Fr-Fan-1ru Fan for ventilation, 1 ru Db25Pin adaptor Small print-card with Db25 to screw-terminal

3m x XlrM-25pin Network Db25pin audio contact to 8 x XlrM (Male), 3 meter cable

3m x XlrM-15pin Network Db15pin audio contact to 4 x XlrM (Male), 3 meter cable

Db15-Db25 cable interconnect cable aDc-aeS to aV-MuX-xxxx

Db25-Db15 cable interconnect cable aV-MuX-xxxx to aDc-aeS

POWER SuPPLy FOR FLaSHLINk FRamE

PWr-ac15/15/5/5V Power supply with 2 x 15V and 2 x 5V, 60W, input 110-260Vac auto-sensing, for spare or redundant supply

PWr-Dc15/15/5/5V Power supply with 2 x 15V and 2 x 5V, 60W, input 36-72VDc auto-sensing, for spare or redundant supply

3Rd PaRty INtERFaCES

Multiple 3rd Party interfaces may be used in conjunction with the Flashlink optical product range. These interfaces further expand the variety of signal formats that can be transported on all our platforms: PtP, WDM, cWDM and DWDM

Since its introduction in 1996, the vikinX Compact range has dominated the marketplace through its simplicity,

reliability and affordability. today the product is one of the most deployed routing switchers in the world.

VikinX routers

RELIaBILItyThe range was followed by VikinX Modular, a range of

modular routing products that has been built with reliability

and affordability as the most important design criteria.

The reliability of the router, due to fully redundant control

architecture and extremely low power consumption are

the major reasons why the VikinX Modular product can be

found in the most mission critical applications.

uNmatCHEd FLEXIBILItyanother reason is the unmatched flexibility of the VikinX

Modular control system, offering control features far beyond

other comparable routing systems.

as the only system available with full TcP/iP connectivity,

VikinX Modular reduces the capital expenses necessary to

install the system down to a minimum.

reliability through design simplicity as well as easy to

operate user interfaces keep the operational expenses at a

low level, thus resulting in low cost of ownership.

When adding the 256x256 VikinX Modular in 2006, the line

of modular routing products offers a wide range of different

frame sizes and signal formats covered.

vIkINX SuBLImEin 2006 we introduced VikinX Sublime, built to maintain and

extend our leadership in the market for small and medium

routing applications. VikinX Sublime raises the standard for

reliability, affordability and flexibility in its segment.

The VikinX Sublime range offers the broadcast market the

most extensive range of matrix sizes available (8x8 to 64x64

and 128x2) and covers signal formats from analog video/

audio to HDTV also incorporating 1080p 3gbps Single

link HD. in addition, VikinX Sublime provides many of the

powerful control features that drove the VikinX Modular

range to success.

VikinX Sublime offers flexible routing solutions for general

purpose facilities and on-air routing as well as mobile outside

broadcast applications and sophisticated a/V applications.

EaSy tO uSENetwork electronics’ VikinX System configurator is

developed to eliminate the obstacles installers and

operators face when setting-up and configuring complex

routing solutions. One of the latest examples for easy-

to-use software is the VikinX System configurator that

accommodates wizards and convenient drag & drop menus

comfortably guiding the operator through the installation

process. Together with Network electronics’ proven routing

hardware, the control system with all its control panel

options and software features provides probably the most

comprehensive and reliable routing switcher products in the

business.

network-electronics.com |

ViKiNX SubliMe

VikinX Sublime offers the broadcast industry the most

extensive range of matrix sizes available (8x8 to 64x64 and

16x2 to 128x2) and covers signal formats from analogue

video/audio to HDTV, with our SMPTe-292 HD products

providing support for the 3gbps dual link standard.

a full range of 3gbps single link HD products is available,

underscoring our commitment to providing future-proofed

products wherever possible.

Flexible control solutions includes support for local and

remote panels, equipped with professional broadcast quality

programmable buttons.

VikinX Sublime provides many of the powerful control

features that have made the VikinX Modular range a

success story. control options such as serial control rS-232,

ethernet and Network control bus enable solutions from the

VikinX Sublime range to fit into any application, from small

production facilities up to large networks with centralized

management through eTH-cON. in addition, numerous

third party interface options allow the integration of VikinX

Sublime at installations that employ proprietary vendor

connectivity solutions.

VikinX Sublime offers flexible routing solutions for general

purpose facility and on-air routing as well as mobile outside

broadcast applications and sophisticated a/V applications.

kEy FEatuRES• Analoguevideo/audio,AES,SD-SDI,E4,STM-1from8x8to64x64•MultiformatHD-SDIfrom8x8to64x64withsupportfor3GbpsDual

link HD• SingleLink3GbpsHDfrom8x8to32x32•Non-squarematrixsizesfrom16x2to128x2• Re-clockingandnon-reclockingSD/HD-SDI•ControlviaEthernet,RS-232,NetworkControlBus(NCB)• Spacesaving5cm(2in)framedepthallowingfrontandrearrack

mount• Flexiblematrixpartitioning• Flexiblelocalandexternalcontrolpanelswithprofessionalbroadcast

quality buttons• Programmablebuttonconfiguration• ExternalcontrolpanelsprovidingmultipurposeGPI/GPO•Ultra-lowpower,high-reliabilitydesign•DualDCpowerinlet• Redundantpowersupplies(brickorframe)withfrontindicators• Signaldiagnostics(signalpresence,re-clocking,EDH)• SeamlessinteroperabilitywithVikinXModularrouters• Syncwithloop-through,tri-levelonHDrouters•Mountingtraysforbrickpowersupply

Marking a new era

VikinX Sublime

173


SL-v1602

16x2

Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front (Sl-V1602-cP)

analog Video

ViKiNX SubliMe

2.2

SPECIFICatIONSFrequency response 0–125MHz –3db

DiFFerentiaL Gain08x08, 16x16 <0.1% (3.58/4.43MHz)32x32, 64x64 <0.2% (3.58/4.43MHz)

DiFFerentiaL phaSe08x08, 16x16 <0.1° (3.58/4.43MHz)32x32, 64x64 <0.2° (3.58/4.43MHz)

crosstalk < –60db (3.58/4.43MHz)

Video S/N ratio typ. 70db, unweighted

bar tilt < 0.1%

Lum. non-Linearity08x08, 16x16 <0.1%32x32, 64x64 <0.2%

impedance 75 ohm

return loss typ. 40db @ 10MHz

Max signal 2Vp-p

coupling Dc

Dc offset <15mV

connector bNc

ac power external power supply 100–260 Vac


SL-v3232

SL-v6464

SL-v0808

8x8


32x32


64x64


• AnalogVideoRouter• Partitioning(forsquareroutersonly)• SL-V1602:expandableupto64x2• BuiltinControlPanelAvailable•ControlviaIP/Ethernet,RS-232,NCB• 5cm(2in)framedepthallowingfrontandrearrackmount•Ultra-lowpowerhigh-reliabilitydesign• Redundantpowersupplies(brickorframe)withfrontindicators• InteroperabilitywithVikinXModularrangeofrouters

SL-v1616

16x16



analog audio 2.2

ViKiNX SubliMe

SL-a1602

16x2

Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front (Sl-a1602-cP)

SPECIFICatIONSFrequency response 20Hz–20kHz ± 0.1db

croSStaLk8x8, 32x32 <–100dbup to 20kHz64x64 <–90db up to 20kHz (<–100db up to

5kHz)

THD+N < 0.01% @ +6dbu < 0.01% @ +22dbu

input impedance > 10 kohm

cMrr > 60db

Output impedance < 66ohm

audio connector Db25 female



SL-a3232

SL-a6464

SL-a0808

8x8


32x32


64x64


• BalancedstereoAnalogAudioRouter•CanbeusedforTimeCoderouting• BuiltinControlPanelavailbable• Partitioning(forsquareroutersonly)• SL-A1602:expandableupto128x2•ControlviaIP/Ethernet,RS-232,NCB• 5cm(2in)framedepthallowingfrontandrearrackmount•Ultra-lowpowerhigh-reliabilitydesign• Redundantpowersupplies(brickorframe)withfrontindicators• InteroperabilitywithVikinXModularrangeofrouters

SL-a1616

16x16



SD Digital Video

ViKiNX SubliMe

2.2

SL-Sd1602

16x2

SPECIFICatIONSData rate NrZ 143Mbps–540Mbps

reference input comp. Video 1Vpp, 300mV sync, 75 ohm

equaLization reclocked routers(r) 0 to 300m @ 270Mbps, typical belden 8281

Non-reclocked routers(N) 0 to 200m @ 270Mbps, typical belden 8281

re-clocking On r-versions only

impedance 75 ohm

return-loss in/out > 15db (5MHz–540MHz)

Signal level nom. 800mVp–p ±10%


connector bNc



SL-Sd3232

SL-Sd6464

SL-Sd0808

8x8

Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front(Sl-SD0808N-cP and Sl-SD0808r-cP (with re-clocking))

32x32


64x64


• SeriealDigitalVideoRouter• Availableversionswithorwithoutreclocking• Availablewithintegratedcontrolpanel• ControlviaIP/Ethernet,RS-232,NCB• Partitioning(forsquareroutersonly)• SL-SD1602:expandableupto64x2• 5cm(2in)framedepthallowingfrontandrearrackmount•Ultra-lowpowerhigh-reliabilitydesign• Redundantpowersupplies(brickorframe)withfrontindicators• InteroperabilitywithVikinXModularrangeofrouters•DVB-ASIcompatible

SL-Sd1616

16x16


Dimensions: 483x44x50 mm (19”, 1ru)also available with X-Y control Panel integrated in the front

(Sl-SD1602r-cP)


3g-HD Digital Video 2.2

ViKiNX SubliMe

SL-3gHd1602

16x2

SPECIFICatIONSData rate NrZ 143Mbps–2,970gbps

reference input NTSc or Pal black burst or HD Tri-level acc. to SMPTe 274M, SMPTe 276M

equalization 0 to 100m @ 2,970gbps, typical belden 1694a

impedance 75 ohm

return-loss in/out < –15db, 5MHz –1.5gHz < –10db, 1.5gHz –3gHz

Signal level nom. 800mVp-p ±10%

rise/fall time 20%–80% – SD limit: 0.4ns-1.5ns, <0.5ns rise/fall variation – HD limit: <270ps, <100ps rise/fall variation – 3g-HD limit: <135ps, <50ps rise/fall variation

connector bNc



SL-3gHd3232

SL-3gHd6464

SL-3gHd0808

8x8


(Sl-3gHD0808-cP)

32x32


(Sl-3gHD3232-cP)

64x64


(Sl-3gHD6464-cP)

•HighDefinitionVideoRouter• Availablewithintegratedcontrolpanel•MultiformatSD-SDI,HD-SDIand3G-HD• Re-clockingonallstandardvideorates• Partitioning(forsquareroutersonly)• Singlelink3Gbps,1080p•ControlviaIP/Ethernet,RS-232,NCB• 5cm(2in)framedepthallowingfrontandrearrackmount•Ultra-lowpowerhigh-reliabilitydesign• Redundantpowersupplies(brickorframe)withfrontindicators• InteroperabilitywithVikinXModularrangeofrouters•DVB-ASIcompatible

SL-3gHd1616

16x16


(Sl-3gHD1616-cP)


(Sl-3gHD1602-cP)


Digital audio

ViKiNX SubliMe

2.2

SL-ad1602-110

16x2

SPECIFICatIONSSignal type aeS/ebu digital audio (Stereo)

input impedance 110ohm

Output impedance 110ohm

Jitter < 0.025ui

Signal level 0.2 – 7Vp-p


Switching mode asynchronous


ac power external power supply 100–260Vac


SL-ad3232-110

SL-ad6464-110

SL-ad0808-110

8x8


(Sl-aD0808-110-cP and Sl-aD0808-75-cP)

32x32



64x64



•DigitalAudioRouter–110ohm•Availableinubalanced75ohmversion(BNCconnectors)• AvailablewithintegratedControlPanelinfront(CPversion)• Set-upoverIPbasedSystemConfigurator• Partitioning(forsquareroutersonly)• SL-AD1602:expandableupto128x2•ControlviaIP/Ethernet,RS-232,NCB• 5cm(2in)framedepthallowingfrontandrearrackmount•Ultra-lowpowerhigh-reliabilitydesign• Redundantpowersupplies(brickorframe)withfrontindicators• InteroperabilitywithVikinXModularrangeofrouters

SL-ad1616-110

16x16






rS-422 Data 2.2

ViKiNX SubliMe

SPECIFICatIONSData rate 115.2 kbs


ac Power external power supply 100–260Vac

Dc Power +5V, connector Db9 male

SL-d32P

32 ports

Dimensions: 483x88x50 mm (19”, 2ru)

• PortedRS-422datarouter• ForflexibleVTR/Devicecontrol• Ethernet/RS-232/NCBcontrol• ConfigurationwithIPbasedsystemconfigurator


Sublime accessories

ViKiNX SubliMe

2.2

SL-PWR-4040W Power Supply for VikinX Sublime router series

SL-PWR-9090W Power Supply for VikinX Sublime router series

SL-mt-6PSu1 ru mounting tray for 6x Sl-PWr-40 or 3 x PWr-90

SL-mt-BPblindplate for 2 positions of Sl-MT-6PSu

dB25PIN adaPtORSmall print-card with Db25 to screw-terminal

3mXXLRF-25PINaudio breakout cableDb25pin XlrF, 3 meter cable

3mXXLRm-25PINaudio breakout cableDb25pin XlrM, 3 meter cable

SL-mt-2PSu1 ru tray for 2x Sl-PWr-40 or 1 x Sl-PWr-90, to be placed behind the VikinX Sublime router

can also be used with other sizes:


redundancy 2.2

ViKiNX MODular

a dead power supply can break down your whole router system. a

damaged ethernet Switch can create incorrect or no communication

at all in your system. The signal path could be broken, leaving you

with no video output.

redundancy has always been a top priority in broadcast. On-air

24/7/365 – this is the requirement. When designing products and

solutions for the broadcast industry, redundancy is a priority for

Network electronics. Technical error or interruptions in the program

signal path are important to prevent.

redundancy is discussed in many areas of a broadcast installation,

from redundant power systems, redundant system control, redundant

signal path and more complex monitoring applications with SNMP

support.

To be able to fulfill the market requirements for mission critical

applications, Network electronics includes redundancy in all our

products and solutions. You will find redundancy in the product itself,

the internal and external wiring, in 3rd party SNMP applications or

redundancy by smart system design.

bear in mind Network electronics’ vision of manufacturing low

power, compact and new technology products, software and

SNMP applications are used as enablers for redundancy. Software

applications can keep overview of system condition, report

abnormalities and take acTiON. instead of bringing more hardware

onboard, clever engineering and new technologies enable Network

electronics to continue providing compact products with redundant

designs at an affordable price.

Main input source

OutputOn-Air

Automaticchange-over

Any ofx-point 1–128

Any ofx-point 129–256

Any of1–128

Any of129–256

PowerA

Main signal sourceredundant

PowerB

PowerD

PowerC

UPS

SYSCON SYSCON

UPS


WIdESt RaNgE OF SIgNaL FORmatSNetwork electronics’ VikinX family of modular routers accommodates

the widest range of signal formats, including HD-SDi, SD-SDi, analog

audio, aeS/ebu audio and telecom. Most of these signals can all be

mixed in the same frame.

independent of signal format, all components are front loaded and

hot-swappable. VikinX Modular allows configurations up to 256 x

256 with increments of 32 x 32.

BRIdgE LINE CONCEPtWith the 256x256 VikinX Modular router Network electronics

introduces the bridge line concept providing a 16 signal wide bus,

allowing to route any signal in the router through Flashlink signal

processing and fiberoptic devices that can be placed in dedicated

slots in the router.

bridge-lines make it possible to internally switch line or frame-

synchronizers, a/D and D/a converters or fiberoptical interfaces

into the signal path, thus enabling signal error suppression, domain

conversion, fiberoptical conversion and trunking.

tCP/IP INtERCONNECtIvItyall VikinX Modular devices provide TcP/iP interconnectivity, an ideal

way of operating a routing system from remote sites, independent of

whether those are within a campus or on another continent.

vIkINX SyStEm CONFIguRatOReach control panel has its own database containing configuration files

for the Software configurable Keys. New configurations can easily be

made using the VikinX System configurator software tool.

With the expandable Panel concept, allowing grouping of several

panels into one logical control unit and the customised Surface

Design, giving unlimited possibilities in designing user surfaces, the

VikinX Modular range of control panels provides one of the most

sophisticated router control systems available.

all routers can be controlled remotely through Pcs, other

manufacturers control equipment or Network’s own THOr Windows-

based software.

New features are continuously added to make the use of the system

even more simple and comfortable.

The steadily growing number of third party interfaces allows

installation of VikinX Modular routers in existing third party systems.

Those systems can also be controlled from a VikinX Modular control

system including the THOr Windows software in order to obtain

all advantages provided by the Network electronics router control

system.

NO COmPROmISEHeat and high power consumption are the enemies of any

electrical device. Network electronics’ routers have ultra low power

consumption and air flow to provide best possible whorking

conditions to a central router, securing reliability and maximum

running time.

FRamE SIzESThe VikinX Modular series comes in three frames sizes.

The 5ru series (S) is for routers where space is at a premium and a

maximum of 64x64 cross points is needed.

everything is the same for the 9ru (M) series except it has space for

up to 128x128 cross points.

The 21ru (l) series still uses the same building blocks and provides

256x256 cross points.

Physical Dimensions483x400x340 mm (19”, 9ru)


a simple, elegant router design•HighReliability• EasyUpgrades• EasyMaintenance

Modular Frames

ViKiNX MODular

2.2



Single board Matrix Design– 32x32 matrix modules

2 x gYDa-VX2 x SYScON

2 x Power Supplies

Single board Matrix Design– 32x32 matrix modules

2 x SYScON2 x Power Supplies

Modular Frames 2.2

ViKiNX MODular

tHE SImPLE, ELEgaNt dESIgN• Highreliability

• Lowpowerconsumption

• Loadsharingpowersuppliesrunningatverylowlevel

• Minimumnumberofcircuitmodules

• Minimumnumberofmoduleinterconnections

• RedundantFanswithplentyofair-spaceandlownoise

EaSy SERvICEaBILIty• Noactivecomponentsonrearpanel

• Allfrontloading,hotswappablemodules

• Minimal#ofsparestostock

• Easyupgradetolargermatrixsizes

a control System architecture for today’s needs

a ROutER WItH tHE COmPLEtE SEt OF FEatuRES• MeetsallrelevantSMPTEspecifications

• IncludesSNMP,Webtools

• HighlevelofRedundancy

SImPLE aNd FamILIaR INtERCONNECt• Worksverywellforsmallsystems

• Worksverywellforlargerarrangements

– grow with facility

• Supportsremotesitesextremelywell

FEatuRES• 2PowerSupplies(4xinL) – redundant and load sharing (single PSu (2x in l) included in the router price) • 2SystemControllersSYSCON – System controller for all VikinX modular routing switchers (single SYScON

included in the router price) – redundant and Dual level control with different protocols – crosspoint configuration on flash card – Dual Sync inputs – Simultaneous switching of entire matrix • Built-inmonitoringmatrixwith1outputper32x32block• InternalBridgeLinesforadvancedprocessingandfiber(256x256only)• SD-SDI,HD-SDIandAESdigitalaudioroutinginoneframe•Mixed525/625operation• Tri-LevelSync• IndependentEthernetandserialports – Fully redundant internal control architecture • 2Status,monitoring,alarmingmodulesGYDA-VX – Optional router control module – Signal diagnostics – redundant SNMP and Web-based interaction

CONtROL INtERFaCESSerial ports:2x rS-232/422/485 with standard SYScON2x rS-232/422/485 with redundant SYScON

connector Db9 femaleethernet ports:1x 10/100base-T with standard SYScON1x 10/100base-T with redundant SYScON1x 10/100base-T with standard gYDa-VX1x 10/100base-T with redundant gYDa-VX

connector rJ45

POWER SuPPLIES

ac range 90-130Vac / 180-254Vac switchable, 50-60Hz, 300W

connector iec 320, separate input for each power supply

Dc range 36-72VDc, 300W connector Screw terminalalarm Power alarm relay contact closure connector rJ45

cooling Type internal forced air


Serial digital video Routers

vd256256L

SD Digital Video

ViKiNX MODular

2.2

ELECtRICaL SIgNaL INPutSStandard SMPTe 259M




return loss > 15db (5-540MHz)

cable equalization 0 to 300m typical belden 8281

ELECtRICaL SIgNaL OutPutSconnector 75 ohm bNc female


Signal Polarity Non-inverting with respect to inputs



REFERENCE INPutSNumber of inputs 2 standard, both reference signals

supplied to both SYScON when used in redundant mode

connectors 75 ohm bNc female, loop-thru

return loss > 40db (100kHz – 5MHz), >35db (5-10MHz)

Signal Format NTSc or Pal black burst or HD Tri-level acc. to SMPTe 274M, SMPTe 276M

Signal level Nominal 1.0Vp-p

Field Selectivity Odd / random field selectable

Timing range adjustable in 1 line steps

aLaRm INtERFaCEScard edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX. information regarding performance of incoming signal, eDH on each signal path can be presented on one common surveillance and monitoring output.



HD Digital Video 2.2

ViKiNX MODular

High definition digital video Routers

Hd256256L





return loss > 15db (5MHz-1.5gHz)







REFERENCE INPutSNumber of inputs 2 standard, both reference signals supplied

to both SYScON when used in redundant mode


return loss > 40db (100kHz – 5MHz),

>35db (5-10MHz)



Field selectivity Odd / random field selectable


aLaRm INtERFaCES card edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX. information regarding performance of incoming signal, eDH on each signal path can be presented on one common surveillance and monitoring output.



Serial digital video Routers

vd128128m / vd6464S

SD Digital Video

ViKiNX MODular

2.2













to both SYScON128 when used in redundant mode





Field Selectivity Odd / random field selectable


aLaRm INtERFaCEScard edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX. information regarding performance of incoming signal, eDH on each signal path can be presented on one common surveillance and monitoring output.

VD128128M

VD6464S


HD Digital Video 2.2

ViKiNX MODular

High definition digital video Routers

Hd128128m / Hd6464S













to both SYScON-SM when used in redundant mode


return loss > 40db (100kHz – 5MHz),

>35db (5-10MHz)





aLaRm INtERFaCES card edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX. information regarding performance of incoming signal, eDH on each signal path can be presented on one common surveillance and monitoring output.

HD128128M

HD6464S


analog Stereo audio Routers

a128128m / a6464S

ELECtRICaL SIgNaL INPutSType balanced


impedance > 10 kohm

cMrr > 60db

Max. level +23dbu

ELECtRICaL SIgNaL OutPutSType balanced


impedance < 66 ohm

cMrr > 40db

Max. level +23dbu

gain adj. 1.0db (compensation for 600 ohm load)

PERFORmaNCEFrequency response 20Hz – 125kHz (-3db),

20Hz – 20kHz ±0.1db

adjacent crosstalk > 100db, 20Hz – 20kHz

SNr < -90dbu(a)

THD+N < 0.01% at 6dbu

click noise < -50dbu

aLaRm INtERFaCEScard edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX

analog audio

ViKiNX MODular

2.2

a128128M

a6464S


digital audio, aES/EBu Routers

ad128128m / ad6464m

ELECtRICaL SIgNaL INPutSType Transformer balanced


impedance 110 ohm

Signal level > 0.2 – 7Vpp

ELECtRICaL SIgNaL OutPutSType Transformer balanced


impedance 110 ohm

PERFORmaNCESampling rates 32–96kHz


Jitter Typical 800ps


to both SYScON-128 when used in redundant mode







aLaRm INtERFaCEScard edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX.

Digital audio + Telecom 2.2

ViKiNX MODular

140/155mbps telecom Routers

t128128-140/155m / t6464-140/155S

ELECtRICaL SIgNaL INPutSStandard iTu g.703 cMi

Data rate 140Mbps / 155Mbps











to both SYScON-128 when used in redundant mode





aLaRm INtERFaCES card edge leDs, rS-232/422/485 with open protocol, SNMP agent and Web interface with gYDa-VX.


along with the broad range of VikinX routing switchers, Network

electronics provides numerous possibilities to either direct or

remote control of all switching devices. From simple single bus and

X-Y control panels for smaller applications to advanced iP control

panels, SNMP control and web client for highly flexible large router

applications, there is always a control set-up that fits the needs of

your application.

SyStEm CONFIguRatOR SOFtWaRENew panel configurations can easily be made using the VikinX System

configurator software tool, developed to eliminate the obstacles

installers and operators face when setting-up and configuring

complex routing solutions. The VikinX System configurator

accommodates wizards and convenient drag & drop menus

comfortably guiding the operator through the installation process.

ROutER CONtROLLERWith the VikinX Modular router controller SYScON we have taken

system security onto new heights. Through our fully redundant

control architecture, from the independent control ports on the

router to the crosspoint switch controller, we can offer the highest

reliability possible in a routing system. The SYScON control

system completely avoids single points of failure, like changeovers,

centralized main controllers or similar. SYScON retains the system

database in an easy removable compact Flash card. SYScON

provides both serial and ethernet/iP interfaces. The iP connectivity

allows operating a routing system from remote sites, independent

of whether those are within a campus or on another continent. Our

intelligent iP control panels automatically obtain the iP address of the

redundant SYScON in case there is an error on the main controller.

SNmP CONtROLWith the gYDa-VX monitoring and control device we are offering

signal diagnostics on a user friendly web interface as well as

SNMP control, allowing our routers to be controlled by a Network

Management System.

INtELLIgENt CONtROL PaNELSintelligent control panels accommodate features and user interface

flexibility that typically require a huge selection of different products.

With the VikinX panels you can create an unlimited number of

different user interfaces exactly fitting your operational requirements.

each control panel has Software configurable Keys allowing simple

operation like Single bus or X-Y, but also complex Multi-level /

Multi-crosspoint operations. The expandable Panel concept allows

grouping of several panels into one logical control unit. customised

Surface Design is giving unlimited freedom in designing button lay-

outs.

VikinX configuration, control and Monitoring

ViKiNX cONFiguraTiON, cONTrOl aND MONiTOriNg

2.2

WEB PaNELWeb Panel was developed to simplify the use of routers in a

computer-based environment. Network electronics’ System

configurator contains a given number of web panel templates

available to the user, fully configurable with all the features offered in

the company’s VikinX iP based hardware control panels. Web Panel

works with browsers like Firefox, Safari, and Opera and provides a

control interface compatible with Windows, Mac and linux.

Web Panel features:

• WebPanelserverfeaturesinclude:

– install to a single Windows web server

– activity log

– client log-in via standard web browser

– iP verification for iT security

• WebPanelclientfeaturesinclude:

– Platform independent, router control from Pc, Mac or linux

– Web panel templates, software configurable keys

– router access according to user rights

– No software installation required on client computer

– advanced router control features


Direct and remote control 2.2


2 x CP 16 LCD

CP MDP

Video L1

CP 16 LCD

2 x CP 44 MEC

CP 44 MEC

CP 44 MEC and CP 16 LCD

Video L2

Video L3

Site 2

Site 1

AdditionalControl

2 x CP 16 LCD

Video L1

CP 16 LCD

2 x CP 44 MEC

CP 44 MEC and CP 16 LCD

CP 44 MEC

Video L2

Video L3

Site 3

CP MDP

InternetTHORTHOR

RouterManagement

System

VikinX SystemConfigurator

VikinX Compact routers and control panels

VikinX Sublime routers

VikinX Sublime control panels

3rd party control androuter systems

ETH-CON

Ethernet

RS232

NetworkControl Bus

(NCB)

THOR

Numerous possibilities for both direct and remote control of all

components …

through the use of panels, Pcs, SYScON, gYDa, other manufacturers control equipment and THOr

For direct control of the VikinX compact routers, Network electronics

has developed a flexible and expandable range of compact panels.

For the VikinX modular routers, Network electronics offers a range of

iP-based control panels that allows the use of standard ethernet laN.

To further allow for flexibility, the eTH-cON enables compact routers

and control panels to interconnect with the modular control system.

Thus the modular control panels can be used to control compact

routers and the advanced features of the modular control system are

made available for compact routers. The SYScON cards contain the

configuration database for the modular routers and optionally for the

panels on an easily replaced compact Flash card.

gYDa-VX gives the modular routing line a comprehensive alarming/

surveillance and SNMP control. gYDa-VX is available both as single

controller and dual redundant controller.

The THOr router management system is a Windows-based router

control system for the VikinX compact and modular router series.

THOr offers a wide and modular range of features that provides

complete control and multiple configuration options.


control and Monitoring


2.2

SySCON

SyStEmcPu 400MHz intel PXa255 StrongarM

Memory compact Flash

ELECtRICaL INtERFaCES2 x rS-232 or rS-422 control ports on Db9F conforming to ibM Pc (rS-232) or SMTPe207M (rS-422)

1 x 10baseT/100base-TX fast ethernet, full duplex capable

POWER CONSumPtION+5V, typ. 400 ma. Maximum 3W

SySCON-256 / SySCON-128 / SySCON-64

gyda

SyStEmcPu 400MHz intel PXa255 StrongarM

Memory compact Flash

ELECtRICaL INtERFaCES1 x 10baseT/100base-TX fast ethernet, full duplex capable

POWER CONSumPtION+5V, typ. 400 ma. Maximum 3W

gyda-vX

•WEBinterfacetoolforroutermonitoringandcontrol,SNMPAgent.•WEBinterfaceHTTPver.1.1,HTMLver.4.01,compatiblewithallmajor

browsers, SNMP ver. 3.0, user based Security Model •Monitoringandcontrolfeaturesavailableonbothuserinterfaces• Signalpresencedetectiononinputs• ReadingRe-clockerlockandlockrate143,177,270,360,540,

1485/1483.5 on all outputs • SYSCONError• EDHMonitoring• PossibilityforseparatedEthernetconnectionsformonitoringandcontrol

gYDa-VX


ethernet connections 2.2


ethernet connectivity for VikinX compact and Sublime routers.

control, configure or monitor your infrastructure from anywhere

RouterManagement

System

VikinX SystemConfigurator

VikinX Compact routers and control panels

VikinX Sublime routers

VikinX Sublime control panels

3rd party control androuter systems

ETH-CON

Ethernet

RS232

NetworkControl Bus

(NCB)

THOR

EtH-CON

EtH-CON


Modular control Panels


2.2

expandable Panel concept

2 x cP 16 lcD interconnected via the ePc bus will logically appear as one panel on the VikinX modular control bus.

cP 16 lcD and cP 44 Mec interconnected via the ePc bus will logically appear as one panel on the VikinX modular control bus.

2 x cP 44 Mec interconnected via the ePc bus will logically appear as one panel on the VikinX modular control bus.

customised Surface Designall buttons in use…

extra overlay ready for customising comes with every iP-based control Panel. The overlay has half stamped holes for the buttons, making it easy to customise.

example of customised panel

cSD (customised Surface Design) gives you a greater freedom in designing your specific user surface. With cSD you can remove keys that you find unnecessary, create functional blocks, as you need them and still get a professional looking panel.

SCk – Software Configurable keys

EPC – Expandable Panel Concept

CSd – Customised Surface design


Modular control Panels 2.2


44 Software Configurable Buttons

CONtROL INtERFaCESethernet ports 1x 10/100base-T

connector rJ45

POWER SuPPLIES

ac range 90-254Vac, 50-60Hz, 10W

connector iec 320

Dc range 36-72VDc, 10W

unit Power Voltage +5V Dc

connector Db9 male

PHySICaL dImENSIONS

483x44x45 mm (19”, 1ru)

CP-44-mEC

• 44Softwareconfigurablemechanicalbuttons

16 Software Configurable LCd-Buttons

CONtROL INtERFaCESethernet ports 1x 10/100base-T

connector rJ45

POWER SuPPLIES

ac range 90-254Vac, 50-60Hz, 10W

connector iec 320



connector Db9 male

PHySICaL dImENSIONS

483x44x45 mm (19”, 1ru)

CP-16LCd

•16softwareconfigurableLCDbuttons with 36x24 pixels

For all VikinX Modular control Panels:•Tri-colorbuttonillumination•Ethernetpanelbus•ExpandablePanelConcept(EPC)RS-232port•16GPIports/16GPOports


Master Display Panel (CP-MDP)

Ethernet Ethernet

With preview

OptionalDA converter

Analogue video

Video Server(Moxa VPort 2110)

Ethernet

Preview7 pics per second

Control andpreview

vIdEO PREvIEW ON CONtROL PaNEL CP-mdP

The Master Display Panel (cP-MDP) includes a high resolution QVga

display screen where live video can be presented. “Signal presence”,

or confirmation of video content, can be presented with a frequency

of 7 pics per second.

Typical use for this application is preview before “Take”.

To enable video streaming to the MDP Panel, an external Video

Server is required. The Network electronics certified video server is a

Moxa VPort 2110.

Note: The video series is NOT provided by Network electronics.

master display Panel

CONtROL INtERFaCEScontrol interfaces

ethernet ports 1x 10/100base-T

connector rJ45

POWER SuPPLIESac range 90-254Vac, 50-60Hz, 10W

connector iec 320



connector Db9 male

PHySICaL dImENSIONS483x44x45 mm (19”, 2ru)

CP-mdP-CL

•64softwareconfigurablebuttons•Easyexchangeablelabelling•320x240QVGAcolordisplay•CustomisedSurfaceDesign(CSD)option•Videopreview(optional)

Modular control Panels


2.2

master display Panel

CONtROL INtERFaCEScontrol interfaces

ethernet ports 1x 10/100base-T

connector rJ45

POWER SuPPLIESac range 90-254Vac, 50-60Hz, 10W

connector iec 320



connector Db9 male

PHySICaL dImENSIONS483x44x45 mm (19”, 2ru)

CP-mdP-BW

•64softwareconfigurablebuttons•Easyexchangeablelabelling•320x240QVGAb/wdisplay•CustomisedSurfaceDesign(CSD)option•Videopreview(optional)


all VikinX Sublime control Panels:• Ethernet/RS-232/NCBcontrol• Programmable• Size:19inch–1RU,2RUor4RU–depth5cm

Sublime control Panels 2.2


multibus X-y Control Panel dualbus Control Panel

For router size: 16x2

Singlebus Control Panel

Optional gPi

Panel Router

1ru 16x16, 8x8

2ru 32x32

4ru 64x64

Panel Router

1ru 32x32, 16x16, 8x8

2ru 64x64


Singlebus Control Panels

Sizes offered: 32 and 64•A/VBreakawayfunction•Audiofollowvideofuntion•Legendablebuttons•Panelenablefunction•Takefunction

compact control Panels


2.2

CONtROL SyStEm• Upto50RoutersandControlPanelspersystem

• NetworkControlBusinallRoutersandCPs

• RS-232portinallRoutersandCPs

• De-centralizedcontrolarchitecture

• Local,independantsub-systems

• PC/IP/RemoteaccesspossibilitiesoverRS-232/Ethernet(viaETH-CON)

• Openprotocol;youmaywriteyourownsoftware

vIkINX COmPaCt CONtROL PaNELS, REFERENCE guIdERouter \ CP Singlebus multibus (X-y) CP-uNI gPI / tally

Joystick (w/CP)

VikinX.32 (1ru) remote (2ru) remote (1ru) remote (2ru) remote

VikinX.64 (2ru) remote (4ru) remote (1ru) remote (4ru) remote

caV8 / caV16 (1ru) remote remote / local (1ru) remote (1ru) remote

multibus X-y Control Panels

Sizes offered: 32x32 and 64x64 •A/VBreakawayfunction•Audiofollowvideofuntion•Legendablebuttons•Panelenablefunction•Takefunction

gPI/tally/Joystick Control Panels

Sizes offered: 32x32 and 64x64 •GPIorjoystickoperation•GPI-CPwithsinglebuspanel•Comprehensiveuseroptions•Tallyoutput

universal, multilevel Control Panels

•2x16characteralphanumericdisplay•8levelA/Vbreakawaycontrol•Panelenablefundtion


VikinX System configurator 2.2


The system configurator is made to eliminate the obstacles installers and operators face when setting-up and configuring complex routing switcher solutions.

POWERFuL FEatuRESThe VikinX System configurator features include:

• UnifiedconfigurationtoolforVikinXModular,VikinXSublime,

eTH-cON & gYDa

• Easysystemset-upthroughsimpleWizardandDrag&Drop

menus

• Auto-detecttionofallhardwarewithlistinginmainmenu

• Interactivehelpmenu

ELImINatE tHE OBStaCLESThe VikinX System configurator is the company’s software tool

developed to eliminate the obstacles installers and operators face,

when setting-up and configuring complex routing switcher solutions.

advanced help menu whereever you are in the configuration process.

Selecting help will answer your questions related to your current

configuration area.

The manual is available as print-out.

FuLL tCP/IP INtERCONNECtIvItyVikinX is the only system available with full TcP/iP interconnectivity.

The VikinX router range minimises initial investment cost, and

operating expenses, resulting in very low cost of ownership.

guIdEd INStaLLatIONThe new VikinX System configurator provides wizards and convenient

drag & drop menus that comfortably guide the operator through the

installation process.

tHE mOSt COmPREHENSIvE aNd RELIaBLE ROutINg SWItCHER SOLutIONSTogether with Network electronics’ proven routing hardware VikinX

Modular and VikinX compact, plus the new VikinX Sublime range

of routing switchers, the new software solutions provide the most

comprehensive and reliable routing switcher solutions in the business.


THOr


2.2

RS232

NetworkControl Bus

Ethernet

Ethernet

Ethernet

Ethernet

•Detectyourroutersystemautomatically

• Controlyourrouterswithdrag&dropinterface

• Lockandprotectyourcrosspoints

• Switchupto16virtuallevelssimultaneously

tHOR system requirements:

•WinNT,Win2000,WinXP

• IntelPentiumIII500MHz

• 128MBRAMand50MBharddiskspace

• SVGAvideoadapterandmonitor

FuNcTiONaliTY

CONTROL GUI Matrixview • • • •

Drag&Droproutercontrol • • •

VirtualRouterMapping(Multilevelcontrol) • • •

ConfigurableControlGUI •

TieLinesmanager •

CONTROL FEATURES Crosspointprotection(lock,protectandprohibit) • • • •

Salvos • • • •

Salvotimescheduling •

CategoriesandGroups • • •

Crosspointlogging • • •

COMMUNICATION FEATURES SingleComputertocompactrouters(RS-232) • • • •

Singlecomputertomodularrouters(TCP/IP) • • • •

MultiplecomputersonLAN • • •

RemotecomputeronLANormodem(PCtoPC) •

3rdpartyinterface(protocolconverting)(PCtodevice) •

CONFIGURATION FEATURES Routerconfiguration • • • •

Mnemonicsandicons • • • •

UserManagementwithlogin • • •

router size limitation 64x64 64x64 NO NO N.a.

THOR STANDARD EDITION

• No router size limitationIncludes: • Standard Edition• Multiple computers on LAN

THOR PREMIUM EDITION

• No router size limitation• Includes: Premium EditionTieLines Manager

THOR TIELINE EDITION

Control Functions

• Matrix Views

• Crosspoint Lock and Protection

• Salvo

Configuration

• Mnemonics and Icons

All editions have the following basic functions and configuration

possibilities:

Upgrade 1

• Router sizes up to 64x64

THOR BASIC EDITION

Upgrade 2

Upgrade 3

• Router sizes up to 64x64Includes:• Basic Edition• Drag & Drop Router Control• Categories and Groups• Crosspoint Logging• Virtual Router Mapping (Multilevel Switching)• User Management

baSic

STaNDarD

PreM

iuM

Tiel

iNe

FeaT

ure P

acK

THOr is the Windows-based router control system

for the VikinX router series


THOr 2.2


eXTra FeaTureS

these features are available in tHOR if extra control guI or

communication are needed.

Some communication features need extra hardware (included in the

price).

CONtROL guI FEatuRES

Salvo Scheduler

COmmuNICatION FEatuRES

laN Multi user interface

ethernet interface to VikinX compact Hardware adapter

routers and VikinX Sublime (rS-232 to ethernet

converter) eTH-cON

3rd Party interface eTH-cON

advanced remote control

•PC(Modem)toPC(Modem)

•PC(Modem)toDeviceServer DeviceServer

G SaLvO SCHEduLER • Timedsalvotakeswithsalvoscheduler• Advancedreoccurrenceoptions

(hourly, daily, weekly and more)• Executemanysalvosinatimed

sequence with salvo sequence editor

Client ClientClient

THOR THORTHOR

MASTER

Client

THOR

G LaN muLtI uSER INtERFaCE (STaNDarD eDiTiON ONlY)• GraphicalEditorformakingcustom

design router control views• WindowsInternetExplorerHTML

based control interface

G EtHERNEt INtERFaCE tO vIkINX COmPaCt aNd vIkINX SuBLImE• DirectconnectionofaVikinX

compact and VikinX Sublime router with/without panel to ethernet

• Includeshardwareadapter• MoredetailsonETH-CON,seep.35

F 3Rd PaRty INtERFaCE• Wesupport3rd party interfaces

by protocol converting• IncludesETH-CONasprotocol

interface G advaNCEd REmOtE CONtROL Special router control solutions• PC(Modem)toPC(Modem),remote

THOr client, connect to Master Pc (must include laN Multiuser)

• PC(Modem)toDeviceServer,remoteserial port by modem connection


aNalOg ViDeO aNalOg auDiO

cOMPONeNT aNalOg ViDeO

Network electronics’ compact VikinX routers embody the company’s

pioneering spirit by providing a ground-breaking price to

performance ratio in a feature-rich range.

The units’ unparalleled ultra-thin housing was designed to

accommodate facilities where real estate is at a premium.

configurations, ranging from 8 x 4 to 64 x 64, address every

application from broadcast to corporate to post-production.

Small and Medium-sized routers

ViKiNX cOMPacT

2.2


Small and Medium-sized routers 2.2

ViKiNX cOMPacT

DigiTal ViDeO DigiTal auDiO

rS-422 DaTaTelecOM

POWER SuPPLyall VikinX compact Frame

routers are supplied with a single

desk-top power supply included

in the price.

PaRtItIONINg taBLE Router Size (square)

FORmat 64 32

composite Video 64x64 32x32

Y/c (SVHS) 32x32 16x16

rgb/YuV 21x21 10x10

rgb/sync 16x16 8x8

it is possible to reconfigure the switch groups

for all routers in the compact router line via

the configuration switch on the back-plane to

create several formats of routers.


64x64

SPECIFICatIONSFrequency response 0-125MHz -3db

Differential gain typ. 0.08% (3.58/4.43MHz)

Differential phase typ. 0.08° (3.58/4.43MHz)

crosstalk < -60db (3.58/4.43MHz)

Video S/N ratio typ.70db

bar tilt < 0.1%

lum. non-linearity < 0.1%

impedance 75 ohm


Max signal 2 Vp-p

ViT input 1Vpp, 300mV sync, 75ohm

Dc offset typ. < 15mV

Propagation delay 15ns ± 1ns

coupling Dc

connector bNc




v6464

32x32

SPECIFICatIONSFrequency response 0-125MHz -3db

Differential gain typ. 0.06% (3.58/4.43MHz)

Differential phase typ. 0.06° (3.58/4.43MHz)


Video S/N ratio typ.70db

bar tilt < 0.1%

lum. non-linearity < 0.1%

impedance 75 ohm


Max signal 2 Vp-p

ViT input 1Vpp, 300mV sync, 75ohm

Dc offset typ. < 15mV


coupling Dc

connector bNc




v3232

analog Video

ViKiNX cOMPacT

2.2

•Powerdownmemory•RS-232Interface•NetworkControlBus

•Powerdownmemory•RS-232Interface•NetworkControlBus


analog audio 2.2

ViKiNX cOMPacT

64x64

SPECIFICatIONSFrequency response 20Hz-100kHz ± 0.1db

crosstalk > -100db

clicknoise typ. <50dbu

THD+N < 0.005%

SNr > 90db ref. to 0db 20Hz-20kHz

Number of inputs 64 (Stereo) electronically balanced

input impedance >10 kohm Max input level +23dbu

cMrr >75db

Max. input level + 23dbu

Number of outputs 64 (Stereo) electronically balanced






a6464

32x32

SPECIFICatIONSFrequency response 20Hz-100kHz ±0.1db

crosstalk > -100db

clicknoise < 60dbu

THD+N < 0.005%


Number of inputs 32 (Stereo) electronically balanced

input impedance > 10kohm

Max input level + 23dbu

cMrr > 75db

Number of outputs 32 (Stereo) electronically balanced






a3232

a6464 is also available as mono. This unit is called a6464 Mono.

•100kHzAudioBandwidth•Powerdownmemory•Programmableformat•RS-232Interface•NetworkControlBus•AlsousableasTimeCoderouter

•100kHzAudioBandwidth•Powerdownmemory•Programmableformat•RS-232Interface•NetworkControlBus•AlsousableasTimeCoderouter


cOMPONeNT aNalOg ViDeO

component analog Video

ViKiNX cOMPacT

2.2

if our routers were any thinnerWe could ship them in envelopes

everything you want in a compact

feature-rich design, including:

• Seamlesstri-stepswitching

• Externalcontrolsystemcompatibility

• Typ.0–110/130MHz/-3dB@0dBminputsignal

• Audiobreakawaypossible

• Upto1600x1200resolution

• Built-inRS-232interface

• Built-inprofessionalcontrolpanel

available in configurations of rgbHV, plus stereo analog audio.

Sizes include 16x16, 16x8, 8x8, 8x4.

CONFIguRatIONSThe following formats may be configured (analog stereo audio and

built-in control panel are both optional):

16x16 rgbHV + aa + cP

16x8 rgbHV + aa + cP

8x8 rgbHV + aa + cP

8x4 rgbHV + aa + cP


component analog Video 2.2

ViKiNX cOMPacT

8x8 / 8x4

vIdEO SPECIFICatIONS Frequency response typical 0–110MHz / -3db @ 0dbm input

signal

Number of inputs 8

Number of outputs 8 or 4, depending on model

audIO SPECIFICatIONS (OPtIONaL)

Number of inputs 8 (Stereo), true balanced

Number of outputs 8 or 4 (Stereo), depending on model, all true balanced

gENERaL

Max. power consumption <20W


Cav0808 / Cav0804

vIdEO SPECIFICatIONS Frequency response typical 0–130MHz / -3db @ 0dbm input

signal

Number of inputs 16

Number of outputs 16 or 8, depending on model

audIO SPECIFICatIONS (OPtIONaL)

Number of inputs 16 (Stereo), true balanced

Number of outputs 16 or 8 (Stereo), depending on model, all true balanced

gENERaL

Max. power consumption <40W


Cav1616 / Cav1608

16x16 / 16x8

vIdEO SPECIFICatIONS Differential gain typical 0.1% (3.58/4.43MHz)

Differential phase typical 0.2° (3.58/4.43MHz)


Video S/N ratio typical 70db

bar tilt < 0.1%

lum. Non-linearity < 0.1%

impedance 75 ohm

return loss typical 38db

Max signal 2 Vp-p

coupling Dc

Dc offset typ. 5mV


connector bNc

Switching Seamless w/variable delay 2-5s, or ViT, selectable via DiP-switches. Pal/NTSc selection on DiP-switches. ViT loop

audIO SPECIFICatIONS (OPtIONaL)Frequency response 20Hz-100kHz ± 0.1db

crosstalk > -100db

click noise < 60dbu

THD+N < 0.003%


input impedance > 10k ohm

cMrr > 75db

Max. input level + 25dbu



PaNEL SPECIFICatIONS (OPtIONaL)Salvos Programmable/executable on panel

gENERaLac Power external power supplies 100 – 260 Vac

Dc Power ±15V, connector Db9 male, equipped with 2x Db9 connectors

Cav0808 / Cav0804 / Cav1616 / Cav1608:


64x64


ViT input comp. Video 1Vpp, 300mV sync, 75ohm

equalization automatic up to 300m (belden 8281)

impedance 75 ohm

return loss in/out > 18db (10MHz–270MHz)



connector bNc




vd6464

32x32


ViT input comp. Video 1Vpp, 300mV sync, looped, 75ohm


impedance 75 ohm

return loss in/out > 18db (10MHz–270MHz)



connector bNc




vd3232

SD Digital Video

ViKiNX cOMPacT

2.2

•D14:2:2270MbpsComponent•143MbpsNTSCComposite•D2177MbpsPALComposite•Upto540MbpsDatarate•InputEqualization•NetworkControlBus•Powerdownmemory•RS-232Interface•DVB-ASIcompatible

•D14:2:2270MbpsComponent•143MbpsNTSCComposite•D2177MbpsPALComposite•Upto540MbpsDatarate•InputEqualization•NetworkControlBus•Powerdownmemory•RS-232Interface•DVB-ASIcompatible


Digital audio 2.2

ViKiNX cOMPacT

64x64

SPECIFICatIONSSignal type aeS/ebu digital audio

Number of inputs 64 transformer balanced

input impedance 110 ohm

Number of outputs 64 transformer balanced


Jitter 800ps

Delay 170ns

Signal level 0.2 – 7Vpp




ac power external power supply 100 or 260 Vac



ad6464-110

32x32

SPECIFICatIONSSignal type aeS/ebu digital audio

Number of inputs 32 transformer balanced

input impedance 110 ohm

Number of outputs 32 transformer balanced


Jitter 800ps

Delay 170ns

Signal level 0.2 – 7Vpp




ac power external power supply 100 or 260 Vac



ad3232-110

also available as unbalanced 75 ohm(aD6464-75)

also available as unbalanced 75 ohm(aD3232-75)

• 110ohmbalancedin-andoutputs• 96kHzcompatible• Samplingrates32–96kHz• PowerDownMemory• Programmableformat•NetworkControlBus• RS-232Interface

• 110ohmbalancedin-andoutputs• 96kHzcompatible• Samplingrates32–96kHz• PowerDownMemory• Programmableformat•NetworkControlBus• RS-232Interface


64x64

SPECIFICatIONSData rate 34Mbps – 45Mbps g.703 HDb3

equalization automatic, up to 200m (belden 8281)

impedance 75 ohm

re-clocking On outputs


Signal level 1000 mV fixed, 75 ohm load

connector bNc

ac Power external power supplies 100–260 Vac

Dc Power ±5V, connector Db9 male

Max power consumption < 17.5W


t6464-34/45

32x32

SPECIFICatIONSData rate 34Mbps–45Mbps g.703 HDb3


re-clocking on outputs

impedance 75 ohm

return-loss > 16db

Signal level 1000mV fixed on 75 ohm load

connector bNc


Power option 24–72V Dc



t3232-34/45

•34Mbpsor45MbpsDatarate•InputEqualization•Output-Reclocking•MeetsITU-TG.703forHDB3signals•RS-232Interface•NetworkControlBus

Telecom

ViKiNX cOMPacT

2.2

•InputEqualization•NetworkControlBus•RS-232Interface



Telecom 2.2

ViKiNX cOMPacT



64x64

SPECIFICatIONSData rate 140Mbps – 155Mbps g.703 cMi

equalization automatic, up to 200m (belden 8281)

impedance 75 ohm

return loss > 16db (10MHz – 270MHz)

Signal level 1000 mV fixed, 75 ohm load

connector bNc

ac Power external power supplies 100–260 Vac

Dc Power +5V, 2 pin Molex connector

Max power consumption < 80W


t6464-140/155

32x32

SPECIFICatIONSData rate 140Mbps–155Mbps g.703 cMi


impedance 75 ohm

return-loss > 16db

Signal level 1000mV fixed on 75 ohm load

connector bNc


Power option 24–72V Dc



t3232-140/155

•140Mbpsor155MbpsDatarate•InputEqualization•Non-Reclocking•MeetsITU-TG.703forCMIsignals•RS-232Interface•NetworkControlBus


•Machineandeditcontrol•Stateoftheartquality•Powerdownmemory•Forproductionsystems•RS-232Interface•NetworkControlBus

rS-422 Data

ViKiNX cOMPacT

2.2

32x32

SPECIFICatIONSData rate 5Mbps


ac Power external power supply 100–260Vac

Dc Power +5V, connector Db9 male


d3232


2.2


VikinX accessories

ViKiNX acceSSOrieS

2.2

all Network electronics products have a single desktop power supply

included in the unit price. below you will find some options for single

or redundant power supply in 19”-2ru.

19”-2ru power supply frame can be equipped with up to 4

Motherboards, where each Motherboard can house up to 2 power

supplies (single or redundant) of all VikinX equipment (routers,

amplifiers, converters) up to the VikinX.32 router Family, as well as

aD6464-110 and a6464 Mono. For a6464 Stereo, please specify

PSu’s for each Mono frame!

each motherboards have 5 Dc power outlets. gPi alarm per power

supply included. each power supply gives 60W. autosensing

100-240Vac.

Please call for 48V Dc solutions.

Note that all routers and control panels are supplied with single

desktop power supply as standard.

PWr-ac15/15/5/5V

Order no. description:Fr-PWr-1S Frame, 1 x Motherboard and 1 x Power Supply,

handles up to 5 VikinX devices

Fr-PWr-1r Frame, 1 x Motherboard and 2 x Power Supplies, handles up to 5 VikinX devices

Fr-PWr-2S Frame, 2 x Motherboards and 2 x Power Supplies, handles up to 10 VikinX devices

Fr-PWr-2r Frame, 2 x Motherboards and 4 x Power Supplies, handles up to 10 VikinX devices





Specify Power cables (quantity of each type) when ordering Fr-PWr-xx. See below.

Power Cables for FR-PWR-xx Dc-Dc-+/-5V cable, 1,5m (5 ft.), interconnects

Fr-PWr-xx and VikinX devices +/-5V Typical products: ViDeO

Dc-Dc-+/-15V cable, 1,5m (5 ft.), interconnects Fr-PWr-xx and VikinX devices +/-15V Typical products: auDiO

Fr-PWr-2r-V rack mount redundant PSu solution for V6464 and aD-6464-75. Frame, 2 x Motherboards and 4 x Power Supplies, incl. dedicated Dc/Dc PSu-router cable

Fr-PWr-3r-VD rack mount redundant PSu solution for VD6464. Frame, 3 x Motherboards and 6 x Power Supplies, incl. dedicated Dc/Dc PSu-router cable

uPgRadE aNd SPaRE PaRtS mOduLES

Power Supply module for FR-PWR-xx

PWr-ac Power supply with 2 x 15V and 2 x 5V, 60W, 15/15/5/5V input 110-260Vac auto-sensing, for spare or redundant supply

PWr-Dc Power supply with 2 x 15V and 2 x 5V, 60W, input 15/15/5/5V 36-72VDc, for spare or redundant supply

BaCkPLaNE FOR POWER SuPPLy mOduLES FOR FR-PWR-XX bcK-Pl backplane for Power Supply Modules for Fr-

PWr-xx, can hold 2 x PSu modules

FaN Fr-Fan-1ru Fan for ventilation, 1 ru. Please call for further

instructions.


VikinX accessories 2.2

ViKiNX acceSSOrieS

aCCESSORIESY-cable, for redundant power

a necessary item to combine two power supplies for redundancy

TOOl-KiT rJ45-Ncb connector Matchbox (adapter) between rJ45 and Ncb (Network control bus), incl. 2 x Ncb 0.3 and 2 x rJ45-rJ45-0.3

rJ45-Ncb-aDP connector Matchbox (adapter) between rJ45 and Ncb (Network control bus)

Db25Pin adaptor Small print-card with Db25 to screw-terminal

NCB-BuS CaBLE INCL. CONNECtORS

Ncb-0,3 Ncb (Network control bus) 0.3 meter cable




Ncb-15 Ncb (Network control bus) 15 meter cable



Ncb-xx Ncb (Network control bus) longer lengths

audIO dB25 tO XLR

3m x XlrF-25pin Network Db25pin audio contact to 8 x XlrF (Female), 3 meter cable

3m x XlrM-25pin Network Db25pin audio contact to 8 x XlrF (Male), 3 meter cable

dESktOP POWER SuPPLy uNItS (PSu)NumBER ItEm dESCRIPtION

aC dESktOP POWER FOR vIkINX SuBLImE

12876 Sl-PWr-90 For Sl-HD6464-r/-cP, Sl-SD6464-r/-cP, Sl-a6464/-cP , Sl-a3232/-cP, Sl-V6464/-cP

12450 Sl-PWr-40 For all other Sublime routers

aC dESktOP POWER FOR vIkINX COmPaCt

12450 Sl-PWr-40 For a3232, a6464 Mono a6464 (1 router requires 2 units. Must be ordered separately)

16675 DP ac +/-5V / 35W For aD3232-75, aD3232-110, aD6464-75, aD6464-110

12450 Sl-PWr-40 For caV0804, caV0808, caV1608, caV1616, incl. Variants

16675 DP ac +/-5V / 35W For D3232

16675 DP ac +/-5V / 35W For recl8

16675 DP ac +/-5V / 35W For T3232-140/155, T3232-34/45, T6464-34/45

11082 DP ac +5V / 110W For T6464-140/155 (For redundant power, choose Fr-PWr-3r-VD)

16675 DP ac +/-5V / 35W For V3232, V6464

16675 DP ac +/-5V / 35W For VD3232

11082 DP ac +5V / 110W For VD6464 (For redundant power, choose Fr-PWr-3r-VD)

aC dESktOP POWER FOR CONtROL PaNELS

12450 Sl-PWr-40 For Sublime Panels

16675 DP ac +/-5V / 35W For iP Panels

11079 DP ac +/-5V / 10W For compact Panels

aC dESktOP POWER FOR 1 Ru FLaSHLINk COmPaCt dIStRIButION amPLIFIERS

11084 DP ac +/-15V / 10W For aV0110, a0108DS

11079 DP ac +/-5V / 10W For aD0108Q, V0106Q, V0106DeQ, SDi0106Q

aC dESktOP POWER FOR N-BOX

11084 DP ac +/-15V / 10W For N-bOX (or use Sl-PWr-40!)

dC dESktOP POWER FOR vIkINX COmPaCt

11081 DP Dc +/-15V / 30W For a3232, a6464 Mono a6464 (1 router requires 2 units. Must be ordered separately)

11080 DP Dc +/-5V / 30W For aD3232-75, aD3232-110, aD6464-75, aD6464-110

11081 DP Dc +/-15V / 30W For caV0804, caV0808, caV1608, caV1616, incl. Variants

11080 DP Dc +/-5V / 30W For D3232

11080 DP Dc +/-5V / 30W For recl8

11080 DP Dc +/-5V / 30W For T3232-140/155, T3232-34/45, T6464-34/45

11080 DP Dc +/-5V / 30W For V3232, V6464 (For redundant power, choose Fr-PWr-2r-V)

11080 DP Dc +/-5V / 30W For VD3232

dC dESktOP POWER FOR CONtROL PaNELS

11081 DP Dc +/-15V / 30W For Sublime Panels

11080 DP Dc +/-5V / 30W For iP Panels

11080 DP Dc +/-5V / 30W For compact Panels

dC dESktOP POWER FOR 1 Ru FLaSHLINk COmPaCt dIStRIButION amPLIFIERS

11081 DP Dc +/-15V / 30W For aV0110, a0108DS

11080 DP Dc +/-5V / 30W For aD0108Q, V0106Q, V0106DeQ, SDi0106Q

dC dESktOP POWER FOR N-BOX

11081 DP Dc +/-15V / 30W For N-bOX


Netcare

NeTcare SerViceS

2.3

NeTcare is the name of the technical support

activities offered by Network electronics, for services

on the purchased products.

NeTcare covers:

•CommissioningandConfigurationAssistance

•ServiceandSupport

•Producttraining

Note: Network electronics offers

•3-yearstandardwarrantyonhardwareproducts

from Network electronics

•2-yearstandardwarrantyonthesoftwareproducts

from Network electronics

For “general conditions for Sales” and “limited

Warranty” visit www.network-electronics.com

all details in this catalog are given information and

shall not form part of any contract. all technical

information is subject to be changed without notice.

Network Electronics ASP.O. Box 1020, 3204 Sandefjord, NorwayTel: +47 33 48 99 99 Fax: +47 33 48 99 98

Video Products Group, Inc.1600 Emerson Avenue, Oxnard, CA 93033, USATel: +1 (805) 247-8560 Fax: +1 (805) 247-8561

Gra

phi

c de

sign

: Cha

rlott

e.no

• P

rint:

BK

grafi

sk, S

ande

fjord

/Nor

way

network-electronics.com • vpginc.com

The Global Video Transport Leader

network electronics vpg - catalog 2008/2009

Documents

network equipment

network vpg

network intro page

sonetsdh network interfaces

nebs level

system level

requirements of nebs

important certification