new and enhanced functionalities from … and enhanced functionalities from catia v5 r22 ......
TRANSCRIPT
NEW and ENHANCED FUNCTIONALITIES from CATIA V5 R22 to R27
Speaker: Ray Olson with RAND 3Da division of RAND Worldwide
Focusing on the following Workbenches
� Importance of the Program Directory.
� Sketcher.
� Part Design.
� Generative Shape Design.
� Drafting.
� Assembly Design.
� Machining.
© 2011, RAND Worldwide ®
Sketcher New and Enhanced Functionality
OutputYou can now create a plane from a selected line of the sketcher or a 3D line from a
selected point of the sketcher.
Converting Standard into Construction
Elements
You can now define whether the current
element in edition is to be treated as a
construction element or a standard one.
Creating Curvilinear Distance Constraints
You can now create a curvilinear distance
constraint like any other dimensional constraint
of a sketch.
Creating Equidistant Points
You can now create an equivalent dimension for all the
rounds/equidistance values instead of creating many individually
modifiable formulae. With this, you can modify multiple distance
values by modifying only one of the parameters.
Sketcher V5-6R2013 (R23)
© 2011, RAND Worldwide ®
Sketcher New and Enhanced Functionality
Sketcher
You can now have a new setting using which you can choose the minimize
transformation mode when entering the Sketcher workbench. With this,
the viewpoint transformation brings the sketch plane parallel to screen, as
close as possible to the initial viewpoint in 3D.
About Smartpicking Background Elements
You can now directly use the background elements like existing geometry of a
sketch to position the future geometry to create. This way you can now manage the
selection of background entities to define their inputs.
© 2011, RAND Worldwide ®
Sketcher New and Enhanced Functionality
Sketcher V5-6R2014 (R24)
Aligning Points
You can now align a number of points
horizontally, vertically or along a
direction.
About Dragging Using SmartPick
You can now drag the geometries using SmartPick and position them with respect to
each other or with the other background elements.
Instantiating Fix Together Items
You can now instantiate a Fix Together item from an existing Fix Together item.
Creating Chamfers
You can now enter the length value as the first input in
Sketch tools when Hypothenuse and Angle or First Length
and Angle options are selected while creating a chamfer.
© 2011, RAND Worldwide ®
Sketcher New and Enhanced Functionality
Sketcher V5-6R2015 (R25)
Creating Polygons
You can now create a polygon with a number of sides ranging
from three to 100 in R25 & R26 only.
V5-6R2017 (R27) ONLY Creating Polygons
The feature is enhanced as follows, the maximum number of sides of a polygon is now 24. The
default polygon you can create is a hexagon. The default mode of creation of a polygon is with an
in circle
Analyzing a Curve by Porcupine Analysis
You can now perform porcupine analysis on curves to create a visual representation of the point,
tangent, and curvature continuity of curves.
Quickly Creating Dimensional/Geometrical Constraints
You can now choose to display the dimensional constraints as you sketch the geometry.
© 2011, RAND Worldwide ®
Sketcher New and Enhanced Functionality
Sketcher V5-6R2016 (R26)
Creating Profile Offsets
You can now offset an entire profile and manage the offset between the base profile and
the offset profile.
Analyzing Sketched Geometry
You can check and change the orientation of the profile of the sketch under analysis.
Preview while Chamfering and Cornering
You can now display the preview while chamfering and cornering multiple vertices.
© 2011, RAND Worldwide ®
Part Design New and Enhanced Functionality
Part Design V5-6R2013 (R23)
Creating Circular Patterns
You can create the specific staggered pattern configurations by rotating the alternate circles of the
crown with certain angle.
Administration: Creating Thread Standards
A new Unit node is available in the Standard
Definition dialog box to define unit of new standards.
Creating Chamfers
A new Corner Cap check box is available in the
Chamfer Definition dialog box.
Creating Remove Face Features
A new Fillet Propagation contextual command is available to get the tangent continuous filleted
faces of the selected face.
The orange arrow remains available on the limiting element even after closing the Face to Limit
dialog box. Thus, you can change the orientation of the limiting element without editing it.
Creating Mirrors
A new Keep specifications check box is available in the Mirror Definition dialog box.
© 2011, RAND Worldwide ®
Part Design New and Enhanced Functionality
Part Design V5-6R2014 (R24)Creating Hole Standards
You can now create new hole standards from the existing standard files.
Metric_Cap_Screws and Socket_Head_Cap_Screws
Thread Standards Management
You can now specify main diameter of thread/tap as reference for standards management.
Migrating Thread Standards
You can now migrate thread standards file from .txt format to .xml format.
© 2011, RAND Worldwide ®
Part Design New and Enhanced Functionality
Part Design V5-6R2014 (R24)Creating Holes
For blind type holes, V-Bottom is now the default bottom type.
Working with Patterns
You can now edit the patterning features easily to switch from single to multiple features and vice
versa. This functionality is available for rectangular patterns, circular patterns, and user patterns.
You can now copy and paste multiple patterning features.
You can now powercopy multiple patterning features.
For rectangular patterns, you can now create patterns with identical instances in both directions, and
set the staggered step value to half of the spacing between instances.
Boolean Performance
A new mode for Boolean operations now allows fast update of the design sequence when a non-
impacting modification is performed at the beginning of the design cycle. This enhancement is
available for the following commands Assemble, Remove, Add and Intersect.
Thread / Tap
A new option lets you specify the main diameter of thread/tap as a reference for thread standards
management.
© 2011, RAND Worldwide ®
Part Design New and Enhanced Functionality
Part Design V5-6R2015 (R25)Creating Chamfers or Fillets Using Vertex Selection
You can now create fillets or chamfers on three concurrent edges by selecting a common vertex.
User Interface Enhancement
The Chordal Edge Fillet, Constant Edge Fillet, and Variable Edge Fillet commands are now
accessible from a single dialog box.
Positions and Anchors in User Pattern
You can now define Points, axis systems, geometric sets, and ordered geometric sets in the 3D as
positions for pattern instances, also Axis systems as anchors.
Creating Mirror Features
A warning message now appears if the object to mirror contains non-movable elements or sub-
elements. You can now mirror the thick surface and close surface features.
© 2011, RAND Worldwide ®
Part Design New and Enhanced Functionality
Part Design V5-6R2016 (R26)Creating Splits
You can now split an element by extrapolating the splitting surface in curvature when it is intersecting
at least one of the edges of the element.
Creating Remove Face Features
You can now easily detect incorrect inputs with the help of improved error message and diagnostics.
Creating Tritangent Fillets
You can now define several limiting elements while creating a tritangent fillet. You can create and
define sweeps or extracted elements, for example, as limiting elements.
Creating Patterns
You can now insert Part Design features such as pads, pockets,
shafts, grooves, and holes, on the fly, while creating a pattern.
Creating User Patterns
You can now quickly define the required number of axis systems as
positions for instances, along with the defined curve, normal to the
surface.
© 2011, RAND Worldwide ®
Part Design New and Enhanced Functionality
Part Design V5-6R2017 (R27)Creating Shafts
You can now define the various limits like Up to next, Up to last, Up to plane, or Up to surface while
creating a shaft.
Creating Grooves
You can now define the various limits like Up to next, Up to last, Up to plane, or Up to surface while
creating a groove.
Creating Hole Standards
You can now define hole standards with an optional parameter to manage thread description.
Creating Remove Face Features
The faces causing errors while using the Remove Face command are now highlighted and labeled.
Creating Mirrors
The wireframe preview of a feature now appears while mirroring and its mirror is created with the same direction and
limiting specifications.
© 2011, RAND Worldwide ®
GSD New and Enhanced Functionality
Generative Shape Design V5-6R2013 (R23)
Creating Mid Surfaces
You can now create a mid-surface from a pair of faces.
Creating a Curve from Equations
You can now define a parametric curve
from three Cartesian equations.??This command is only available with the
Generative Shape Optimizer product??
© 2011, RAND Worldwide ®
GSD New and Enhanced Functionality
Generative Shape Design V5-6R2013 (R23)
Defining an Axis System
You can now define an axis system that distinguishes between default
computation and no selection input. You can also create an axis system
according to a robot (compass) definition.
Creating Multiple Points and Planes
You can now edit instances and spacing of points or planes created
using the repetition command.
Extrapolating Surfaces
You can now quickly create extrapolated surfaces by selecting the boundary of a
feature.
© 2011, RAND Worldwide ®
GSD New and Enhanced Functionality
Generative Shape Design V5-6R2014 (R24)
Working with the Sharpness Mode
You can now accurately detect the edges' sharpness and display all edges detected as sharp when the
Shading with Edges without Smooth Edges view mode is active.
Resizing Infinite Elements
You can resize the graphical representation of features with infinite geometry.
When the Shading with Edges without Smooth Edges view mode is selected, sharp edges are displayed
as black lines. However, for performance reasons, some sharp edges are not displayed at all.
The Sharpness mode allows to display all edges detected as sharp feature.
© 2011, RAND Worldwide ®
GSD New and Enhanced Functionality
Generative Shape Design V5-6R2014 (R24)
Joining Surfaces or Curves
The Check manifold option is enabled for surfaces.
You can now generate non-manifold objects by joining
surfaces and have the possibility to prevent the creation
of such configuration.
Creating Multiple Points and Planes
A new option Spacing is available in
Parameters list which allows you to create
points and planes over the whole distance of
the selected support curve or between the point
selected and the curve's extremity.
© 2011, RAND Worldwide ®
GSD New and Enhanced Functionality
Generative Shape Design V5-6R2014 (R24)
Trimming Geometry
There is a new check box Keep all pieces. You can select all input geometry at once, keep all sides,
and generate a non-manifold result.
Creating a Helix
You can now create a Helix by specifying any two of the three required parameters.
Creating Mid Surfaces
You can now create Mid Surfaces from complex models by offsetting the faces.
Creating Chamfers
You can now create a standard, C0 or C1 type of edge feature in chamfers by selecting the required
filter.
Creating Points
You can now swap between the extremities if either of them is set as the default reference point
when creating a point on a curve.
© 2011, RAND Worldwide ®
GSD New and Enhanced Functionality
Generative Shape Design V5-6R2015 (R25)
Creating Mid Surfaces
The mid surface feature can now automatically compute the length used to offset the surface. A new
mode now allows you to extract a mid surface from a solid or a volume, and an offset ratio is
provided.
Extracting Geometry
Two new propagation types are provided: Protrusion and Depression. Protrusions and/or
depressions of a surface can be selected quickly. Also, the base surface can be selected without its
protrusions and/or depressions. Two cells belong to a protrusion if their union is convex. Two cells
belong to a depression if their union is concave. Depression/Protrusion propagation modes are only
available if the element to extract is a surface.
Creating Planes
You can now use a ratio parameter
to create a plane normal to a curve.
This ratio positions the plane at a
given point on the curve corresponding
to this ratio.
© 2011, RAND Worldwide ®
GSD New and Enhanced Functionality
Generative Shape Design V5-6R2016 (R26)
Scanning a Part and Defining In Work Objects
The user interface has been improved.
Creating Remove Face Features
The error diagnostic is improved and the face causing the error is now highlighted in red color.
Smoothing Curves
You can now select multiple curves to be smoothed.
Creating Mid Surfaces
You can now automatically compute the threshold thickness.
Creating Fill Surfaces
You can now have a better control of the deviation.
Extrapolating Curves
You can now extrapolate wires on both extremities.
.
© 2011, RAND Worldwide ®
GSD New and Enhanced Functionality
Generative Shape Design V5-6R2016 (R26)
Extrapolating Surfaces (curvature mode only)
You can now extrapolate a surface on multiple sides.
You can now extrapolate a surface up to a geometrical element.
You can now set a maximum Deviation value between the obtained and the theoretical result
surface.
Creating Extruded Surfaces
While creating an extrude, by default, a normal direction to the plane, on which the profile lies is
selected.
Defining an Axis System
You can now specify an existing axis system as reference when creating a new axis system.
Creating Multiple Points and Planes
You can now create multiple axis systems along a curve.
.
© 2011, RAND Worldwide ®
GSD New and Enhanced Functionality
Generative Shape Design V5-6R2017 (R27)
Creating 3D Tags
You can create 3D tags on geometrical features by selecting points or vertices as leader points.
Creating a Mid Surface
When creating a mid surface by a thickness threshold (Automatic Mid Surface Extraction) method, a more
desirable mid surface result is now obtained with defeatured L junction.
With the Face Pairs creation mode, the mid surface is now created at an offset from the selected face instead of the
paired face.
Revolving Surfaces and Volumes
You can now set the limit types as dimension or up-to-element for revolving surfaces and volumes. See Creating
Revolved Surfaces and Creating revolved Volumes.
Joining Surfaces or Curves
You can now automatically remove the lost edges for join features.
Creating Projections
You can now select different extrapolation modes while projecting wires on surfaces.
Creating Offset Surfaces
You can now automatically compute and remove the tricky faces in an offset feature.
© 2011, RAND Worldwide ®
Drafting New and Enhanced Functionality
Drafting V5-6R2013 (R23)
Creating Half Dimensions
Your preferences for creating a regular or a half dimension is now taken into account
independently for dimension from an axis line to a geometry and from a geometry to an axis line.
Dimension Tolerance Formats
The new Tolerance Display Factor parameter has been added in the Format Definitions reference.
This new parameter affects tolerance properties.
Positioning a View
You can now align (i.e translate and/or rotate) a view along with a reference view from the
selection of various alignment elements contained in the views at stake.
See Generative Drafting User's Guide > User Tasks > Positioning a View.
Unique names
You can now have an option to check the uniqueness of names of sheets or views.
Annotation Positioning
You can now:
Create a text on a dimension's extension line.
Create a text leader extremity on the center of datum target's upper compartment.
Create an annotation body with snappingon a target annotation's attachment point and automatically remove the
created leader, if any.
Drafting V5-6R2014 (R24)
© 2011, RAND Worldwide ®
Drafting New and Enhanced Functionality
Drafting V5-6R2014 (R24)
Working with Dimension Systems
You can now:
Add one or several dimensions to a compatible dimension system.
Transfer one or several dimensions from a dimension system to another compatible dimension system.
Remove one or several dimensions from a dimension system.
Creating a Geometrical Tolerance
You can now control the availability of engineering symbols to be inserted in the various fields of Geometrical
Tolerance dialog box based on the Drafting standard.
Administration
The new Naming Uniqueness section allows you to verify the naming uniqueness of views or sheets.
See also Creating Views and Defining a Sheet.
Drafting V5-6R2015 (R25)
Inserting Images
You can now choose the orientation reference of the image as sheet or the 2D component.
You can also orient the image freely by specifying an angle.
Working with Dimension Systems
You can now:
Group Dimensions, Regroup Dimensions & Ungroup Dimensions
© 2011, RAND Worldwide ®
Drafting New and Enhanced Functionality
Drafting V5-6R2015 (R25)
Arrow and AnnotationLeader Orientation
You can now snap the leaders of texts, balloons, datum features, datum targets, geometrical tolerances,
coordinate dimensions, welding symbols, instantiation of the text, tables, or labels along privileged
directions.
Creating Arrows
You can now conveniently create the arrow head before the tail.
Annotation Body Orientation
You can now orient the annotations of the texts, balloons, datum features, datum targets, geometrical
tolerances, coordinate dimensions, welding symbols, instantiation of the text, tables, or labels along the
vertical direction by pressing the Alt key.
Administration
You can now configure the default behavior of an item in the property toolbars. The configurations
available: Fix value, Value based on element type, Value based on style and
Value based on style (No overload)
Manipulators
You can now snap arrows, leaders, and annotations on the privileged directions.
© 2011, RAND Worldwide ®
Drafting New and Enhanced Functionality
Drafting V5-6R2016 (R26)
Changing Frame Sizes for Fixed Frames
You can have multiple fixed size frames for annotations in the same drawing. You can change the size
of the frames and manage several fixed sized frames using standard files.
Updating Welding Symbols with Standard Switch
The welding symbols are now automatically updated when the drawing standard is switched. During
the switch, a symbol is not displayed if it is unavailable in the target standard.
Creating a Datum Target
It is now possible to create a movable datum target and specify a square reference area for the datum
target, in accordance with ASME Y14.5 2009 standard.
Drafting V5-6R2017 (R27)
Changing Frame Sizes for Fixed Frames
You can customize the names for the multiple fixed size frames of the same type.
Administration
You can now ensure naming uniqueness for sheet and view names by distinguishing between:
Single byte character set (SBCS) and double byte character set (DBCS)
Lowercase and uppercase
© 2011, RAND Worldwide ®
Assembly Design New and Enhanced Functionality
Assembly Design V5-6R2013 (R23)
Performing a Symmetry
The new Include Children OGS and Ignore Hidden Geometries under GS and OGS check boxes are
available in the Assembly Symmetry Wizard dialog box.
Creating an Angle Constraint
You can now display the constraints and parameters, irrespective of the viewing plane.
Managing Offset Constraint
You can now display the constraints and parameters, irrespective of the viewing plane.
Assembly Design V5-6R2014 (R24)
No enhancements in this release.
Assembly Design V5-6R2015 (R25)
No enhancements in this release.
Assembly Design V5-6R2016 (R26)
No enhancements in this release.
Assembly Design V5-6R2017 (R27)
No enhancements in this release.
© 2011, RAND Worldwide ®
Machining New and Enhanced Functionality
Machining V5-6R2012 (R22)
There are no new or enhanced functionalities in this release for all machining workbenches.
Machining V5-6R2013 (R23)
Add PP Word in Machining Patterns and Axial Operations
You can insert and display PP Word instructions before any hole in the Machining Pattern and Axial Machining
Operations.
Improved Collision Check and Collision Avoidance
Ability to include the Part from Part Operation in the collision check performed on macro for the following
Machining Operations: Profile Contouring, Groove Milling, Pocketing, Facing, Curve Following, 4x Pocketing
and Trochoid Milling Machining Operations. The Part from Part Operation check box is added in the Collision
Checking dialog box and the Collision Checking button is added where needed in the Geometry tab.
Improved Intermediate Stock Management in Axial Machining Operations
__A Drill through stock up to bottom check box is added in the Geometry tab. This helps to perform the axial
operation start from top of the stock up to bottom of the stock in case of Through hole .
__A Spot drill to part check box is added in the Geometry tab of the Spot Drilling Machining Operation. It
allows the drilling from the intermediate stock up to the part (and ensures the spot-drilling depth/diameter on
the part).
Lathe Machining New Functionalities
Start Limit in Rough Turning
A Start element selection is provided in the Geometry tab to limit input stock in a Rough Turning Machining Operation.
© 2011, RAND Worldwide ®
Machining New and Enhanced Functionality
Machining V5-6R2014 (R24)
There are no new or enhanced functionalities in this release for all machining workbenches.
Machining V5-6R2015 (R25)
3-Axis Surface Machining Enhanced Functionality
Roughing, Spiral Milling
The Concentric tool path style has been enhanced to reduce the machining time:
For external domains, the number of small passes in concave areas has been reduced.
For closed pockets that are large enough and convex, the tool path is optimized by mixing concentric and offset
motions (both respecting the radial engagement). The result is a shorter machining time.
For softer material like aluminium, you can take advantage of the concentric tool path style and drastically reduce
air cut motions using the zig-zag mode.
Roughing
__A new parameter (Overhang) imposes a radial engagement of the tool on the soft boundary trajectory, thus
controlling the load on the tool. For new programs, this option is activated by default, for existing programs,
the behavior is unchanged.
__A new parameter (Upward rework step) optimizes the Roughing machining time: The downward roughing
planes are computed with large steps, then the remaining material on the wall is removed with upward smaller
axial steps.
© 2011, RAND Worldwide ®
Machining New and Enhanced Functionality
Machining V5-6R2016 (R26)
Advanced Machining New Functionality
Stiffener
This new machining operation lets you machine inclined and horizontal stiffeners in one shot.
© 2011, RAND Worldwide ®
Machining New and Enhanced Functionality
Machining V5-6R2017 (R27)
NC Manufacturing Infrastructure Enhanced Functionality
Design Change
When analyzing the geometry specified on a Machining Operation, you can now use new commands
to:
reframe the main viewer on the selected geometry
center the specification tree on the selected geometry.
These commands are available in the Geometry Analyzer dialog box.
ResourcesWhen you modify the total length value (ST) of a tool assembly, you can now select the Assembly total length linked
to tool gage check box to keep the height value of the last stage of the tool holder.
Prismatic Machining Enhanced Functionality
Drilling Intersecting Deep Holes
When drilling intersecting deep holes, you can now reduce the feedrates and spindle speeds using the
following parameters: In the Strategy tab page:
DeepHole LeadIn: specifies the start point of the feeds and speeds reduction.
DeepHole LeadOut: specifies the end point of the feeds and speeds reduction.
In the Feeds and Speeds tab page:
DeepHole Reduced Feed in Percentage: specifies in percentage the value of the feedrates and spindle
speeds reduction.