new york city college of technology division of continuing ... · new york city college of...
TRANSCRIPT
New York City College of Technology
Division of Continuing Education
Building Information Modeling with Revit
Day 6 extras
Core Stairs & Elevators
Professor Paul C. King, RA, AIA, ARA
http://professorpaulking.wordpress.com/
http://students.autodesk.com/
1.23
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Floor Slab : Edit• Main Floor (143’-0 ½”) - Current Level
• Select Edge of Slab and then Edit Boundary
• Hint:
Use Filter Selection to select floors
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Floor Slab : Edit
• Offset from edge of existing floor slab to allow for stair – save sketch
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Floor Slab : Draw Stair Guidelines
• Using Model Lines – draw two guidelines for the center of the stair runs
• Offsets:
• 2’- 4”
• 5’- 2”
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Stair : by sketch
• Using Model Lines – draw two guidelines for the center of the stair runs
• Set Base and Top Levels
• Width = 4’-0”
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Stair : Switch Direction
• Switch the direction of the stair so that the top run connects to the landing
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Stair : Repeat for opposite corner
• Edit Slab
• Main Floor
• Offset 14’-10 and to face of wall
• Repeat creation of stair step-by-step or mirror the
stair from the opposite corner
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Elevator : Autodesk Seek – Manufacturer Family
• Seek.Autodesk.com
• Search: Elevator Door
• (select elevator door center)
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Elevator : Autodesk Seek – Manufacturer Family
• Repeat the Process to get the line work for the Elevator
• We will be combining the two to create our own elevator – doors with Elevator Cab
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
• Open the Elevator
Door Family and
get familiar with is
construction
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Elevator : Autodesk Seek – Manufacturer Family
• Seek.Autodesk.com
• Search: Elevator Electric
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Elevator : Autodesk Seek – Elevator Electric
• Research your elevator needs
• Select Family Types
• Pick a size that matches your need
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Elevator : Autodesk Seek – Elevator Electric
• In plan view select Ref. Level
• Select across the plan
• Filter and remove the elevator at top
• Select only 2d Linework
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
• Group the selected linework together
• Name it : Elevator Linework
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Elevator : Autodesk Seek – Elevator Electric
• With the Elevator Group Selected
• Choose Copy to Clipboard
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
• Go to Elevator Door-Center.RFA
• Paste from clipboard
• Save_as new family : Elevator Plan with Door-Center
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Family: Elevator Plan with Door-Center
• Align the elevator cab
with the face of the wall
• Load the compiled elevator with door into your project file
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
• Center the elevator
door with the door for
the floor
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Elevator : Insert New ComponentDay 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Elevator : Edit Walls - Paste Aligned to Select LevelsDay 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
• Remember to use a Shaft wall with a C-H stud to enclose the elevator
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Elevator : Add Shaft to SlabsDay 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Fire Tower with Stair
• Offset Main Floor 10’
• Rename to TOWER 1
• Offset TOWER 1 to create up to TOWER 5
• Levels will be named with TOWER Prefix
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
• Create 5 New Levels for
the Tower
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Fire Tower with Stair • Slab is located 8” beyond the face of the interior
of the wall to support the concrete blockDay 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Fire Tower with Stair• The shaft should extend from Tower 1 to Tower 5
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
• Tower 1
• Tower 5
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Fire Tower with Stair
• Add
Guidelines to
create the stair
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
• Stair from Main
Floor to Tower 1
• Draw across for
9 risers then
down and back
for 9 more
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Views of Fire Tower with Multistory StairDay 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up
• Completed View
• Shaft should begin on level TOWER 1 and extend to TOWER 5
• The exterior wall should be modified to have a TOP OFFSET of 3’ so no rail is required
Prof. Paul C. KingCopyright © 2013
Revit
Computers 3
Institute of Design
and Construction
Day 12 - Wrap Up
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/Paste
Aligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Day 12 FH.09
Edit Slab
Remove Corners
Guidelines
Stair
By sketch
Flip Stair
Repeat
Elevator
Autodesk Seek
Elevator Door
Elevator Electric
Elevator-door-center
Insert
Copy/PasteAligned to Levels
Shaft
Fire Tower
Levels
Slab
Shaft
Stair
Overview
Wrap Up