no show barn door hardware - cloudinary · 2000. 8. 31. · "no show" barn door hardware...
TRANSCRIPT
-
"NO SHOW" BARN DOOR
HARDWAREINSTALLATION INSTRUCTIONS
CONGRATULATIONS ON YOUR DECISION TO BRING HOME AN AMERICAN MADE PRODUCT OF THE HIGHEST QUALITY.
www.Rustica.com
DESIGNED AND CRAFTED ENTIRELY IN THE
U.S.A.
DON’T BE A STRANGER. FOLLOW US ON SOCIAL MEDIA.
-
2 www.Rustica.com
NO SHOW BARN DOOR HARDWARE Installation Instructions
3/32",
PARTS
a.
b.
I
a. 1/2"b. 3/8"
c
Allen Wrench
-
3 www.Rustica.com
NOTE:
HANGER INSTALLATION
1. facing up on a fla
From the back side, drill a small pilot hole only 1/4" deep for each anti-jump using the 3/32" drill bit.Do NOT drill the pilot hole for the anti-jump all the way through the door. Drill a hole all the waythrough the door for the wheels at both marked spots using the 3/8" drill bit.
2.).
3.
4.
5. olt through the wheel e lt t
the a).
6. Phillips screw into the pilot hole.(Figure 2b).
Back Sideof Door
Back Sideof Door
Top of D
oor
Top of D
oor4” 1”
1”
-
Use teamwork. We recommend two people for this build.FIRST THINGS FIRST
Check to see if the floor below the track area is level. If the floor rises mor well. If the floor is
not level, measur f the floor surfac make sure the door clears the floor.
a b a a a b a a a a a a b
a a ab a a
first measur
and the floor -3
Figure 6
Figure 7 Figure 8
4 www.Rustica.com
1
2-3/8" b
1/2" a