nte 1750

Upload: canchapaxi

Post on 03-Apr-2018

220 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/29/2019 Nte 1750

    1/3

    NTE1750Integrated Circuit

    Dual SwitchMode Solenoid Driver

    Description:

    This NTE1750 is a monolithic integrated circuit in a 15Lead Staggared SIP type package that incor-porates all the functions for direct interfacing between digital circuitry and inductive loads. This deviceis designed to accept standard micriprocessor logic levels at the inputs and can drive 2 solenoids.The output current is completely controlled by means of a switching technique allowing very efficient

    operation. Furthermore, it includes an enable input and dual supplies (for interfacing with peripheralsrunning at a higher voltage than the logic).

    Features:

    D High Current Capability

    D High Voltage Operation

    D High Efficiency SwitchMode Operation

    D Regulated Output Current

    D Separate Logic Supply

    D Thermal Protection

    Applications:

    D Hammer Driver for Matrix Printers

    D Stepper Motor Driver

    D Electromagnetic Controller

    Absolute Maximum Ratings:

    Supply Voltge, VS 50V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Logic Supply Voltage, VSS 12V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Enable and Input Voltage, VEN, Vi 7V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Reference Voltage, Vref 7V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Peak Output Current (Each Channel), IO

    NonRepetitive (t = 100s) 3.0A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Repetitive (80% ON; 20% OFF, Ton = 10ms) 2.5A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC Operation 2.0A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Total Power Dissipation (TC = +75C), Ptot 25W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Operating Junction Temperature Range, TJ 40 to +150C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Storage Temperature Range, Tstg 40 to +150C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Thermal Resistance, JunctiontoCase, TthJC 3C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Thermal Resistancde, JunctiontoAmbient, RthJA 35C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

  • 7/29/2019 Nte 1750

    2/3

    Electrical Characteristics: (VSS = 5V, VS = 26V, TJ = +25C, Note 1 unless otherwise specified)

    Parameter Symbol Test Conditions Min Typ Max Unit

    Supply Voltage VS 12 46 V

    Logic Supply Voltage VSS 4.75 10.0 V

    Quiescent Drain Current (From VSS) Id VS = 46V, Vi1 = Vi2 = VEN = L 4 mA

    Quiescent Drain Current (From VS) Iss VSS = 10V 46 mA

    Input Voltage Vi1, V

    i2Low 0.3 +0.8 V

    High 2.2 7.0 V

    Enable Input Voltage VEN Low 0.3 +0.8 V

    High 2.2 7.0 V

    Input Current Ii1, Ii2 Vi1 = Vi2 = L 100 A

    Vi1 = Vi2 = H 10 A

    Enable Input Current IEN VEN = L 100 A

    VEN = H 10 A

    Input Reference Voltage Vref1, Vref2 0.2 2.0 V

    Input Reference Current Iref1, Iref2

    5 AOscillation Frequency f OSC C = 3.0nF, R = 9.1k 25 kHz

    Transconductance (Each Channel) Ip Vref= 1V 1.9 2.0 2.1 A/V

    Vref

    Total Output Voltage Drop (Each Channel) Vdrop IO = 2A, Note 2 2.8 3.6 V

    External Sensing Resistors Voltage Drop Vsense1,Vsense2

    2 V

    Note 1. L = Low, H = HighNote 2. Vdrop = VCE(sat)Q1 + VCE(sat)Q2.

    VSS

    Enable

    Logic/VS

    Output Low Ch 1

    Input Signal Ch 1

    GND

    OSC RC Network

    Input Ref Vltg Ch 1

    Output High Ch 1

    Input Ref Vltg Ch 2

    Output Low Ch 2

    15

    14

    13

    12

    Output High Ch 2

    Current Sensing Ch 2

    11 Input Signal Ch 2

    10

    9

    8

    7

    6

    5

    Current Sensing Ch 14

    3

    2

    1

    Pin Connection Diagram(Front View)

  • 7/29/2019 Nte 1750

    3/3

    .699(17.7)

    .860(21.8)

    .150 (3.81) Dia Max

    .791 (20.1)

    .689(17.5)

    .069 (1.75)

    .196 (4.99)

    .110(2.79)

    .169(4.29)

    .008 (.203).050 (1.27) .200

    (5.08)

    151