nx design wheel
TRANSCRIPT
![Page 1: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/1.jpg)
Modeling a car wheel -SIEMENS NX
BY DIMITAR CHESHELOSKI
![Page 2: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/2.jpg)
In this example I am modeling a wheel of Audi R8: the alloy wheel, tire, bolts and the brakes.
The idea is to make the model as realistic as possible
* The images used in this example can be found on internet *
AUDI R8 WHEEL _ SIEMENS NX 2
![Page 3: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/3.jpg)
AUDI R8 WHEEL _ SIEMENS NX 3
First, a reference plane is needed, in this case raster image of the wheel is set up on YZ plane.Overall translucency is set to 80% so the image won’t interfere with visibility of the sketches and the geometry.
![Page 4: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/4.jpg)
AUDI R8 WHEEL _ SIEMENS NX 4
Creating the initial sketch, outlining the rim and spoke features.
![Page 5: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/5.jpg)
AUDI R8 WHEEL _ SIEMENS NX 5
Extruding the external rim feature using the Extrude command.
For defining the frontal outer shape of the spokes another sketch was created on the XZ plane.
![Page 6: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/6.jpg)
AUDI R8 WHEEL _ SIEMENS NX 6
Revolving this sketch creates limit face for spokes extrusion.
![Page 7: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/7.jpg)
AUDI R8 WHEEL _ SIEMENS NX 7
Extruding the bulk of one spoke.Circular pattern will be used to create the other 4 spokes.
![Page 8: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/8.jpg)
AUDI R8 WHEEL _ SIEMENS NX 8
Extrude and subtract from the bulk of the spoke.
![Page 9: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/9.jpg)
AUDI R8 WHEEL _ SIEMENS NX 9
After extruding the inner rectangle od the spoke (reference first sketch) and applying Boolean Subtract operation we have the original U shape of the spoke.
By using Pattern Geometry we copy the original into circular pattern: span angle 360⁰, count 5.
![Page 10: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/10.jpg)
AUDI R8 WHEEL _ SIEMENS NX 10
Detailing the spokes by applying Draft command.Thus making them wider on one side and narrower on the opposite.
![Page 11: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/11.jpg)
AUDI R8 WHEEL _ SIEMENS NX 11
Blending the inner sharp edges.
![Page 12: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/12.jpg)
AUDI R8 WHEEL _ SIEMENS NX 12
Now I am creating another sketch on the XY plane which I will revolve and use as defining back face for the spokes thickness.
![Page 13: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/13.jpg)
AUDI R8 WHEEL _ SIEMENS NX 13
Revolved sketch.
![Page 14: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/14.jpg)
AUDI R8 WHEEL _ SIEMENS NX 14
Trimming the spokes geometry with the revolved face.
![Page 15: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/15.jpg)
AUDI R8 WHEEL _ SIEMENS NX 15
Next, creating another sketch for the center of the wheel.In this sketch I am using Studio Spline with applied continuity tangent constraints to simulate the curvature of the
original.This sketch will be revolved.
![Page 16: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/16.jpg)
AUDI R8 WHEEL _ SIEMENS NX 16
Trimming the newly revolved sketch with previously created revolved face (green).
![Page 17: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/17.jpg)
AUDI R8 WHEEL _ SIEMENS NX 17
Merging the center of the wheel and the spokes into one solid body.
![Page 18: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/18.jpg)
AUDI R8 WHEEL _ SIEMENS NX 18
The center face is flat.To create dome-like shape and the concave groove around the center of the wheel,
couple of steps need to be done:Split the body using extrude section as a tool option (in this case the green circle sketch)
![Page 19: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/19.jpg)
AUDI R8 WHEEL _ SIEMENS NX 19
The result of the Split Body command.
![Page 20: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/20.jpg)
AUDI R8 WHEEL _ SIEMENS NX 20
Next: make another sketch on XY plane using geometric constraints to constrain the end points of the spline, one to the edge of the split body and the other to the center axis of the wheel.
![Page 21: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/21.jpg)
AUDI R8 WHEEL _ SIEMENS NX 21
Revolving the previously created sketch we get that dome-like shape.
![Page 22: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/22.jpg)
AUDI R8 WHEEL _ SIEMENS NX 22
Now I am creating reference lines with the help of sketch – Intersection Curve option.This command creates cut lines between the selected faces and in this case,
XY plane since the sketch lies on that plane.
![Page 23: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/23.jpg)
AUDI R8 WHEEL _ SIEMENS NX 23
Finally, I can use Bridge Curve command to fit a curve that can connect the reference lines with G2 – curvature connectivity.
![Page 24: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/24.jpg)
AUDI R8 WHEEL _ SIEMENS NX 24
With the revolving of the bridge curve, I get that concave groove face I was aiming for.
With this, the dome-like shape and the concave groove for the center of the wheel is finished.However, geometry needs to be cleaned so there is no geometry overlapping.
![Page 25: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/25.jpg)
AUDI R8 WHEEL _ SIEMENS NX 25
I am deleting this section of the original body. By this I am creating a gap so I can incorporate the newly formed revolved face
and avoid geometry overlapping.
![Page 26: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/26.jpg)
AUDI R8 WHEEL _ SIEMENS NX 26
The revolved bridge curve it’s a face feature, not a body, in order to make it a body and incorporate it into the main body I am extruding the face itself with the End option: until selected, and select the back face of the main body.
At the same time I can unite the newly created extrude body with the main, choosing Unite as a Boolean operation or do the Unite operation separately, however, the result is the same.
![Page 27: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/27.jpg)
AUDI R8 WHEEL _ SIEMENS NX 27
Now, I am creating a sketch to model the remaining geometry of the wheel.By using the Project Curve option I can project any edge of the existing parts or assemblies onto the working sketch
plane and by this saving time and making sure everything is aligned.
![Page 28: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/28.jpg)
AUDI R8 WHEEL _ SIEMENS NX 28
Extrude the sketch and mirror the extruded geometry.
![Page 29: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/29.jpg)
AUDI R8 WHEEL _ SIEMENS NX 29
Circular pattern of the mirrored geometry.
![Page 30: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/30.jpg)
AUDI R8 WHEEL _ SIEMENS NX 30
Extrude the holes (simple sketch with circle) through the whole body and circular pattern applied.
![Page 31: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/31.jpg)
AUDI R8 WHEEL _ SIEMENS NX 31
At the end I am applying circular Edge Blend with various radii.
![Page 32: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/32.jpg)
AUDI R8 WHEEL _ SIEMENS NX 32
Simple render and texture applied to a finished alloy wheel.
![Page 33: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/33.jpg)
The rest of the parts, such as:the tire, the bolts, the disc brake and the disc caliperare modeled using the same or similar techniques.
*the following slides will only show finished models*
AUDI R8 WHEEL _ SIEMENS NX 33
![Page 34: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/34.jpg)
AUDI R8 WHEEL _ SIEMENS NX 34
The Tire
![Page 35: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/35.jpg)
AUDI R8 WHEEL _ SIEMENS NX 35
The Bolts
![Page 36: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/36.jpg)
AUDI R8 WHEEL _ SIEMENS NX 36
The Disc Break
![Page 37: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/37.jpg)
AUDI R8 WHEEL _ SIEMENS NX 37
The Disc Caliper
![Page 38: NX Design Wheel](https://reader034.vdocuments.net/reader034/viewer/2022042505/5886ab711a28ab6d0e8b45cd/html5/thumbnails/38.jpg)
AUDI R8 WHEEL _ SIEMENS NX 38
The whole wheel and all its components.