object detection 156668 steelface sensors brochure

8/3/2019 Object Detection 156668 SteelFace Sensors Brochure

1/12

Rugged inductive sensors for harsh applications


2/122

SteelFace2XDesigned and built tough for rugged applications

Todays inductive proximity sensors provide

position/part confirmation and error proofing

functions on a variety of machines and

assembly lines. When impact damages or

destroys these vital feedback devices it canshut down your entire production process.

This leads to higher sensor costs, higher

maintenance costs, loss of production

and lower profitability...bad news for any

manufacturer.

For even tougher environments, Balluff has the total impact solution

SteelFace 2X sensors installed in Balluff's copper plated steel Bunker

Block II can survive almost any impact.

Bunker Block II's copper plated steel body provides unbeatable

protection from repeated impacts

Unique design allows for position adjustment and quick change out

Even with their extended range, SteelFace 2X models can be flush

mounted in steel

Balluffs unique steel prox mount provides stronger impact resistance

than standard brass plated models.

Simple upgrade from bare sensor: simply enlarge mounting hole to

fit prox mount

Provides enhanced protection from side and frontal impacts, plus

easy change out if needed

Unique steel construction...the most rugged on the market

These sensors have been destroyed by abrasion or damaged by

incidental or repeated contact. They didn't have the sensing range

needed to avoid target contact or the tough construction necessary to

survive unavoidable impact.

SteelFace 2X sensors are built to survive. This sensor has lasted

multiple times longer than its predecessor, improving production

output and reducing replacement costs.

SteelFace sensors can take the punishment

Balluffs SteelFace 2X inductive sensors are

affordable, rugged sensors that are designed

for impact-prone areas. Their stainless steel

faces handle impacts and abuse multiple

times longer than plastic faced sensors. Theyalso provide up to twice the sensing range of

standard flush mount sensors. This feature

allows the sensors to be mounted farther

away from their targets, reducing the chance

of impact and impact-related failures.


3/123 www.balluff.com/steelface

SteelFace2XDC 3-wire, M8, M12, M18Sn 2 mm, 4 mm, 7.2 mm

Housing size M81 M121 M181

Installation type Flush Flush Flush

Rated operating distance sn 2 mm 4 mm 7.2 mm

Assured operating distance sa 0...1.6 mm 0...3.2 mm 0...5.8 mm

PNP N/O Ordering code BES02N5 BES02NA BES02NJ

Part number BES M08EH1-PSC20B-S04G-S BES M12EI-PSC40B-S04G-S BES M18EI-PSC72B-S04G-S

NPN N/O Ordering code BES02N3 BES02N8 BES02NF

Part number BES M08EH1-NSC20B-S04G-S BES M12EI-NSC40B-S04G-S BES M18EI-NSC72B-S04G-S

Supply voltage UB 10...30 V DC 10...30 V DC 10...30 V DC

Voltage drop Ud at le 2 V 2 V 2 V

Rated operating current Ie 200 mA 200 mA 200 mA

Protected against polarity reversal yes yes yes

Short circuit protected yes yes yes

Ambient temperature range T a 25...+70 C 25...+70 C 25...+70 C

Frequency of operating cycles f 750 Hz 500 Hz 250 Hz

Function indicator yes yes yes

Degree of protection per IEC 60529 IP 67 IP 67 IP 67

Housing material Stainless steel 316L Stainless steel 316L Stainless steel 316L

Material of active surface Stainless steel 316L Stainless steel 316L Stainless steel 316L

Connection M12 Connector M12 Connector M12 Connector

Recommended connector C04 AEC/BEC

C04 AEL/BEL

C04 AEC/BEC

C04 AEL/BEL

C04 AEC/BEC

C04 AEL/BEL

Pressure rated to 80 bar (1,160 psi) 60 bar (870 psi) 40 bar (580 psi)

PNP, normally open

Wiring diagrams

NPN, normally open

For detailed installation and sensing range information, see pages 10-11.

SteelFace 2X - Built to last:

Stainless steel face and body lasts longer, saving money on replacements

Extended sensing ranges allow for use in more applications in addition to

decreasing impacts and face damage

One-piece housing eliminates leak points for longer lasting wet location

applications

316L grade stainless steel housings are ideal for use in high impact areas,

food/beverage, marine or machine tool


4/124

Break through the paradigm of constant

weld cell sensor replacement. Properly

mounted and installed, SteelFace 2X/PTFE

sensors can last for months, not just days.

Today's high throughput, robotic weld

cells destroy conventional sensors in no

time. Designed for the toughest weld cell

applications, SteelFace 2X with PTFE coating

survive loading impacts and repel weld

SteelFace2X w it h PTFE CoatingPerfect for heavy duty weld cell applications

spatter to delay the accumulation of weld

slag. Built to survive in brutal automated

welding processes, SteelFace 2X/PTFE is

the go-to weld cell sensor that has it all:

extended flush-mount range, all metal high-impact sensing face, and full PTFE spatter-

resistant coating. Coupled with Balluff's full

line of welding accessories, the SteelFace 2X

PTFE model forms the cornerstone of a total

welding sensor survivability solution.

This standard sensor was no match for the abusive welding

environment. Continuous weld cycles and cleaning processes have

deteriorated the face and exposed the coil. This causes sensor failure,

increased sensor costs, weld cell down-time, and loss of production.

SteelFace 2X with PTFE coating is designed for the welding

environment. In this weld cell, its face and body show little effect from

the welding and cleaning process. Its superior construction lasts

longer, which reduces maintenance costs and increases profitability.

Balluff's total weld cell solution

Option 1 PTFE sensor/prox mount

SteelFace 2X PTFE coated sensor for slag resistance

Black PTFE coated steel prox mount

Adds frontal and side impact protection

Repels weld spatter and slag

Enables sensor adjustment, easy change out and

eliminates re-gapping.

TPE jacketed cable resists premature burn-through

WeldRepel wrap and WeldRepel tubing further protect cable and

connectors to extend useful service life

Option 2 PTFE sensor/Bunker Block II

SteelFace 2X PTFE coated sensor for slag resistance

Copper plated steel Bunker Block II

Adds heavy part loading/unloading impact protection

Copper plating resists weld slag accumulation

Provides sensor adjustment, quick change-out and

heat dissipation between weld cycles

TPE jacketed cable resists premature burn-through

WeldRepel wrap and WeldRepel tubing further protect

cable and connectors to extend useful service life

Break the high sensor consumption weld cell paradigm

PROBLEM SOLUTION

For more information on Balluff's Total Solution, go to www.Balluff.com/WeldAccessories



Housing size M81 M121 M181

Installation type Flush Flush Flush

Rated operating distance sn 2 mm 4 mm 7.2 mm

Assured operating distance sa 0...1.6 mm 0...3.2 mm 0...5.8 mm

PNP N/O Ordering code BES02N6 BES02NC BES02NK

Part number BES M08EH1-PSC20B-S04G-S01 BES M12EI-PSC40B-S04G-S01 BES M18EI-PSC72B-S04G-S01

NPN N/O Ordering code BES02N4 BES02N9 BES02NH

Part number BES M08EH1-NSC20B-S04G-S01 BES M12EI-NSC40B-S04G-S01 BES M18EI-NSC72B-S04G-S01

Supply voltage UB 10...30 V DC 10...30 V DC 10...30 V DC

Voltage drop Ud at le 2 V 2 V 2 V

Rated operating current Ie 200 mA 200 mA 200 mA

Protected against polarity reversal yes yes yes

Short circuit protected yes yes yes

Ambient temperature range T a 25...+70 C 25...+70 C 25...+70 C

Frequency of operating cycles f 750 Hz 500 Hz 250 Hz

Function indicator r yes yes yes

Degree of protection per IEC 60529 IP 67 IP 67 IP 67

Housing material Stainless steel/PTFE coated Stainless steel/PTFE coated Stainless steel/PTFE coated

Material of active surface Stainless steel/PTFE coated Stainless steel/PTFE coated Stainless steel/PTFE coated

Connection M12 Connector M12 Connector M12 Connector


C04 AEL/BEL

C04 AEC/BEC

C04 AEL/BEL

C04 AEC/BEC

C04 AEL/BEL

Pressure rated to 80 bar (1,160 psi) 60 bar (870 psi) 40 bar (580 psi)

SteelFace 2X/PTFE improves weld cell operation:

Stainless steel face outlasts plastic face models

PTFE coating on sensor and mounting nuts repels weld slag and aids in cleaning

Longer sensor life increases weld cell productivity and profitability

Combine these sensors with Bunker Block and WeldRepel accessories for a total

weld cell improvement solution

SteelFace2X w it h PTFE CoatingDC 3-wire M8, M12, M18Sn 2 mm, 4 mm, 7.2 mm


PNP, normally open

Wiring diagrams

NPN, normally open


6/126

If your demanding application requires the

longest sensing range available and flush

mounting is not required, Balluffs SteelFace

3X sensors are the answer. They provide

the longest ferrous sensing ranges availabletoday in a metal-faced sensor.

These one-piece stainless steel face and

body sensors provide extra long range which

reduces the chance of impact by detecting

targets farther away. But, if contact does

happen, their steel faces will withstand

SteelFace3XMaximum sensing range and impact resistant

Housing size M121 M121

Installation type Quasi-flush Non-flush

Rated operating distance sn 6 mm 10 mm

Assured operating distance sa 0...4.9 mm 0...8.1 mm

PNP N/O Ordering code BES02WH BES02WE

Part number BES M12EG1-PSC60Z-S04G-S11 BES M12EF1-PSC10F-S04G-S

NPN N/O Ordering code BES02WF BES02WC

Part number BES M12EG1-NSC60Z-S04G-S11 BES M12EF1-NSC10F-S04G-S

Supply voltage UB 10...30 V DC 10...30 V DC

Voltage drop Ud at le 2 V 2 V

Rated operating current Ie 200 mA 200 mA

Protected against polarity reversal yes yes

Short circuit protected yes yes

Ambient temperature range T a 25...+70 C 25...+70 C

Frequency of operating cycles f 400 Hz 350 Hz

Function indicator(flashes between 70 and 100% of effective operation distance Sr)

yes yes

Degree of protection per IEC 60529 IP 67 IP 67

Housing material Stainless steel 303 Stainless steel 303

Material of active surface Stainless steel 303 Stainless steel 303

Connection M12 Connector M12 Connector


C04 AEL/BEL

C04 AEC/BEC

C04 AEL/BEL

Pressure rated to 80 bar (1,160 psi) 80 bar (1,160 psi)

PNP, normally open

NPN, normally open

Wiring diagrams

impact damage and continue functioning

much longer than plastic faced sensors.

SteelFace 3X sensors are available in quasi-

flush and non-flush models. For repetitiveimpact areas, the quasi-flush models can be

flush mounted for added protection, with a

reduction in sensing range. All models also

have a minimal sensing range reduction

when detecting non-ferrous materials such

as aluminum or brass.




M181 M181 M301.5 M30x1.5

Quasi-flush Non-flush Quasi-flush Non-flush

10 mm 20 mm 20 mm 40 mm

0...8.1 mm 0...16.2 mm 0...16.2 mm 0...32.4 mm

BES02Y3 BES02Y1 BES02YF BES02YC

BES M18EG1-PSC10Z-S04G-S11 BES M18EF1-PSC20F-S04G-S BES M30EG1-PSC20Z-S04G-S11 BES M30EE1-PSC40F-S04G-S

BES02Y2 BES02Y0 BES02YE BES02YA

BES M18EG1-NSC10Z-S04G-S11 BES M18EF1-NSC20F-S04G-S BES M30EG1-NSC20Z-S04G-S11 BES M30EE1-NSC40F-S04G-S

10...30 V DC 10...30 V DC 10...30 V DC 10...30 V DC

2 V 2 V 2 V 2 V

200 mA 200 mA 200 mA 200 mA

yes yes yes yes

yes yes yes yes

25...+70 C 25...+70 C 25...+70 C 25...+70 C

200 Hz 150 Hz 200 Hz 100 Hz

yes yes yes yes

IP 67 IP 67 IP 67 IP 67

Stainless steel 303 Stainless steel 303 Stainless steel 303 Stainless steel 303


M12 Connector M12 Connector M12 Connector M12 Connector

C04 AEC/BEC

C04 AEL/BEL

C04 AEC/BEC

C04 AEL/BEL

C04 AEC/BEC

C04 AEL/BEL

C04 AEC/BEC

C04 AEL/BEL

60 bar (870 psi) 60 bar (870 psi) 40 bar (580 psi) 40 bar (580 psi)

SteelFace3XDC 3-wire, M8, M12, M18, M30Sn 6 mm, 10 mm, 20 mm, 40 mm

SteelFace 3X sensors provide the best range/protection combination on the market:

Provide longest metal-faced sensing ranges available

Outlast conventional plastic faced sensors

Minimal sensing range reduction for non-ferrous materials

Quasi-flush models can be flush mounted with a reduced sensing range


8/128

Many sensing applications require a rugged

housing that is target-material selective. For

example, the ability to detect a steel target

but ignore machined aluminum chips is

required in many automotive engine blockand head manufacturing lines. Conversely,

on steel camshaft and iron crankshaft

lines, it may also be necessary to sense an

aluminum target but ignore steel and iron

filings that might accumulate around the

sensing face.

SteelFace 1X Fe/ NFeFerrous or non-ferrous detection for high-impact areas

SteelFace 1X ferrous/non-ferrous inductive

sensors fit this need. Available with either

Ferrous or Non-Ferrous metal detection,

SteelFace 1X Fe/NFe sensors provide the

flexibility to detect specific metal targets whileincurring incidental impact and abuse directly

on the sensing face. SteelFace 1X Fe/NFe

are also fully flush-mountable for added

protection from impact, and are offered in

both DC 3-Wire and AC/DC 2-Wire + GND

configurations.

Housing size M81 M121

Installation type Flush Flush

Rated operating distance sn 1.5 mm 2 mm

Assured operating distance s a 0...1.2 mm 0...1.6 mm

Ferrous PNP N/O Ordering code BCS02YZ BES02Z3

Part number BES M08EG1-PSC15S-S04G-S BES M12EG1-PSC20S-S04G-S

Ferrous PNP N/C Ordering code BES02Z1

Part number BES M12EG1-POC20S-S04G-S

Non-ferrous PNP N/O Ordering code BES02Z2

Part number BES M12EG1-PSC20N-S04G-S

Ferrous NPN N/O Ordering code BES02YY BES02Z0

Part number BES M08EG1-NSC15S-S04G-S BES M12EG1-NSC20S-S04G-S

AC/DC Ferrous N/O Ordering code

Part number

AC/DC Non-ferrous N/O Ordering code

Part numberRated operating voltage U

e 24 V DC 24 V DC

Supply voltage UB 10...30 V DC 10...30 V DC

Voltage drop Ud at le 2 V 2 V

Rated operating current Ie 100 mA 200 mA

Protected against polarity reversal yes yes

Short circuit protected yes yes

Ambient temperature range T a 25...+70 C 25...+70 C

Frequency of operating cycles f 20 Hz 50 Hz Ferrous/Non-ferrous

Function indicator yes yes

Degree of protection per IEC 60529 IP 67/1200 psi washdown IP 67/1200 psi washdown

Housing material Stainless steel 303 Stainless steel 303

Material of active surface Stainless steel 303 Stainless steel 303

Connection M12 Connector M12 Connector

Recommended connector C04 AEC/BEC, C04 AEL/BEL C04 AEL/BEL

PNP, normally open

PNP, normally closed

NPN, normally open

Wiring diagrams

AC/DC N/O w/ Gnd.




SteelFaceFe/NFeDC 3-wire & AC/DC 2-wireSn 1.5 mm, 2 mm, 5 mm, 8 mm

M181 M301 M12x1 M18x1

Flush Flush Flush Flush

5 mm 8 mm 2 mm 5 mm

0...4.1 mm 0...6.4 mm 0...1.6 mm 0...4.1 mm

BES02Z9 BES02ZJ

BES M18EG1-PSC50S-S04G-S BES M30EG1-PSC80S-S04G-S

BES02Z7

BES M18EG1-POC50S-S04G-S

BES02Z8 BES02ZH

BES M18EG1-PSC50N-S04G-S BES M30EG1-PSC80N-S04G-S

BES02Z6 BES02ZF

BES M18EG1-NSC50S-S04G-S BES M30EG1-NSC80S-S04G-S

BES02Z5 BES02ZC

BES M12EN1-USU20S-S21G-S BES M18EP1-USU50S-S21G-S

BES02Z4 BES02ZA

BES M12EN1-USU20N-S21G-S BES M18EP1-USU50N-S21G-S

24 V DC 24 V DC 110 VAC 110 VAC

10...30 V DC 10...30 V DC 20...250 VAC/20...300 V DC 20...250 VAC/20...300 V DC

2 V 2 V 7.0 V 7.0 V

100 mA 100 mA 200 mA 200 mA

yes yes yes yes

yes yes yes yes

25...+70 C 25...+70 C 25...+70 C 25...+70 C

15 Hz Ferrous/Non-ferrous 15 Hz Ferrous/Non-ferrous 30 Hz Ferrous/15 Hz Non-ferrous 60 Hz Ferrous/45 Hz Non-ferrous

yes yes yes yes

IP 67/psi 1200 washdown IP 67/1200 psi washdown IP 67/1200 psi washdown IP 67/1200 psi washdown



M12 Connector M12 Connector 1/2"x20 Connector 1/2"x20 Connector

C04 AEL/BEL C04 AEC/BEC, C04 AEL/BEL C21 AE3/BE3 C21 AE3/BE3

M12x1

-20

17

2

67

83

LED 1

LED 2

24

M18X1

-20

2.5

66

.5

87

.5LED 1

LED 2

SteelFace 1X Fe/NFe offer unique sensing characteristics in a robust housing:

Retain full sensing range when flush mounted

Extremely rugged stainless steel faces survive repeated frontal impact

Ferrous only models ignore all non-ferrous materials

Non-ferrous only models ignore all ferrous materials

AC/DC models can be used in DC only applications using cables shown on page 12


10/1210

For extremely rugged applicatons, these Bunker Blocks and prox mounts can be used in conjunction

with the SteelFace sensors for an unbeatable combination against impact damaged failures.

Steel Bunker Block II without positive stop

A B C D E F G H

Ordering code BAM00A412.7 28.58 35 8 5.5 17 6.45 4.5

Part number BES 08,0-KB-10/W

Ordering code BAM00C6 19.05 34.92 38.1 12 5.5 22 7 4.5Part number BES 12,0-KB-10/W

Ordering code BAM00F525.4 38.1 38.1 18 6.5 26 7 5.5


Ordering code BAM00HR38.1 60 44.45 30 8.5 42 6.45 6.5


SteelFace and non-ferrous mounting accessories

Material: copper plated steel

Note: The sensing range of the inductive sensor may be slightly

reduced when using these positive stop models.

B

A

C

F

8.0

G

E

H

D

PTFE-coated steel prox mounts with positive stop

A B min C D max. E F G

Ordering code BAM00ACM12x1 8 17.5 15.5 17 17 4

Part number BES 08,0-KH-11S/W

Ordering code BAM00CWM16x1 12 21 15.5 22 22 4


Ordering code BAM00FMM24x1.5 18 21.5 15.5 30 30 5


Installation guidelines

To assure proper function, the values

in the table below and Figure 1

should be observed.

A

Switching distance 2X 2d

Switching distance 3X 4d

X X X X

Sensor Steel Aluminum Brass Stainless Steel

2XFlush Mount

M8 0 mm 6 mm 6 mm 5 mm

M12 0 mm 8 mm 8 mm 7 mm

M18 0 mm 11 mm 11 mm 10 mm

3XQuasi-Flush Mount

M12 7 mm 12 mm 12 mm 10 mm

M18 14 mm 12 mm 14 mm 16 mm

M30 28 mm 28 mm 28 mm 35 mm

3XNon-Flush Mount

M12 25 mm 15 mm 17 mm 25 mm

M18 45 mm 25 mm 25 mm 45 mm

M30 70 mm 40 mm 40 mm 70 mm

When installing in metals, the values for dimension X shown in the following table

must be observed. When these guidelines are followed, the effective switching

distance Sr will deviate less than 10%.

Fig. 1

Active

surface

SteelFace and mounting accessoriesQuick-locking clamps for extended range sensors

A B C D E F

Ordering code BAM00EFM16x1 12 35 20 4 22

Part number BES 12,0-KH-9ST

Ordering code BAM00H5M24x1 18 40 24 6 30

Part number BES 18,0-KH-9ST

Ordering code BAM00JH

M36x1.5 30 46 28 8 41Part number BES 30,0-KH-9STOrdering Code BAM00EH

M16x1 12 35 20 4 22Part Number BES 12,0-KH-9ST/W

Ordering Code BAM00H6M24x1 18 40 24 6 30

Part Number BES 18,0-KH-9ST/W

Ordering Code BAM00JJM36x1.5 30 46 28 8 41

Part Number BES 30,0-KH-9ST/W

SteelFace SensorsHeavy duty mounting accessories

Material:

Std - brass, nickel plated plus LCP

/W - brass, PTFE coated plus LCP

Units in millimeters



Material: black PTFE coated steel

Note: "/W" models are PTFE coated for welding applications



SteelFace SensorsHeavy duty mounting accessories

Aluminum Bunker Block for prox mounts

AL Bunker Block Prox Mount Required A B C D E F G H J

Ordering code BAM00EK see below38.1 10.05 31.75 15.88 M12 6.55 25 17.5 8.75

Part number BES 12,0-KB-9S BES 08,0-KH-2S*

Ordering code BAM00EW see below38.1 19.05 31.75 15.88 M16 6.55 25 19.5 9.75


Ordering code BAM00HF see below50.8 25.4 38.1 19.05 M24 7.9 35 20.5 10.25


Ordering code BAM00JR see below63.5 31.75 50.8 25.4 M36 7.75 48 20.5 10.25


SteelFace quasi-flush and ferrous only mounting accessories

* See chart below for prox mount part numbers

Note 1: The sensing range of the inductive sensor may be slightly

reduced when using these positive stop models.

Note 2: "/W" models are PTFE coated for welding applications

Allows M12 sensor to replace M18 sensor in original M18 location.

** Not for use with 2X or 1X non-ferrous models

A

B

C

D

E

F G

HJ

Standard and PTFE coated prox mounts with positive stop**

A B C D max. E F G

Ordering code BAM00AHM12x1 8 17.5 14.5 17 17 4

Part number BES 08,0-KH-2S

Ordering code BAM00E0M16x1 12 19.5 14.5 22 22 4


Ordering code BAM00ELM18x1 12 19.5 14.5 22 22 4

Part number BES 12,0-KH-2S-M18

Ordering code BAM00FTM24x1.5 18 20.5 15.5 30 30 5


Ordering code BAM00J6M35x1.5 30 20.5 15.5 41 41 6


Ordering code BAM00AKM12x1 8 17.5 14.5 17 17 4


Ordering code BAM00E1M16x1 12 19.5 14.5 22 22 4


Ordering code BAM00FWM24x1.5 18 20.5 15.5 30 30 5


Ordering code BAM00J7 M35x1.5 30 20.5 15.5 41 41 6Part number BES 30,0-KH-2S/W

Opposing installation of two

sensors

This configuration requires a

minimum separation of3 Sn

between the active surfaces for

M8 through M30, 2X and 3X

sensors. (Fig. 2)

Sensor Steel Aluminum Brass Copper Stainless Steel

2XFlush Mount

M12 1.0 mm 0.8...1 mm 0.7...0.85 mm 0.85...1.3 mm 0.5...0.9 mm

M18 1.0 mm 0.8...1 mm 0.7...0.85 mm 0.85...1.3 mm 0.5...0.8 mm

M30 1.0 mm 0.7...1 mm 0.7...0.9 mm 0.0...1.2 mm 0.5...1 mm3X Quasi-Flush Mount

M12 1.0 mm 1.0 mm 0.8 mm 1.0 mm 1.0 mm

M18 1.0 mm 0.7 mm 0.7 mm 0.7 mm 1.0 mm

M30 1.0 mm 0.7 mm 0.7 mm 1.0 mm 1.0 mm

Ferrous Only

M8 1.0 mm 0.45 mm

M12 1.0 mm 0.25 mm

M18 1.0 mm 0.5 mm

M30 1.0 mm 0.7 mm

Non-Ferrous Only

M8

M12 1.0 mm 1.1 mm 0.9 mm

M18 1.0 mm 1.1 mm 0.9 mm

M30 1.0 mm 1.1 mm 0.9 mm

Reduction factors for various target materials

Fig. 2



Material: Machined aluminum

Material:Std - brass, nickel plated

/W - brass, PTFE coated


12/12

USA

Balluff Inc.

8125 Holton Drive

Florence, KY 41042

Phone: (859) 727-2200

Toll-free: 1-800-543-8390

Fax: (859) 727-4823

E M il b ll ff@b ll ff

CanadaBalluff Canada, Inc.2840 Argentia Road, Unit #2Mississauga, Ontario L5N 8G4Phone: (905) 816-1494

Toll-free: 1-800-927-9654Fax: (905) 816-1411

E M il b ll ff d @b ll ff

Mexico

Balluff de Mexico S.A. de C.V

Prol. Av. Luis M. Vega #109

Col. Ampliacion Cimatario

Queretaro, QRO 76030

Phone: (++52 442) 212-4882, 224-3583, 224-3171

Fax: (++52 442) 214-0536

E M il b ll ff i @b ll ff

www.bal luf f .com/steel face

Connector Micro Micro MicroAC 1/2" x 20 UNF MicroAC 1/2" x 20 UNF

Style M12 DC Single Keyway M12 DC Single Keyway 3 Pin Dual Keyway 3 Pin Dual Keyway

Configuration Straight Female Right Angle Female Straight Female Right Angle Female

3 Wire DC Ordering code BCC01C5 BCC01FU

Normally-open Part number C04 AEC-00-VY-050M C04 BEC-00-VY-050M

Ordering code BCC01C3 BCC01FR

Part number C04 AEC-00-TY-050M C04 BEC-00-TY-050M

4 Wire DC Ordering code BCC01E0 BCC01HU

(NO/NC) Part number C04 AEL-00-VY-050M C04 BEL-00-VY-050M

Ordering code BCC01CR BCC01HK

Part number C04 AEL-00-TY-050M C04 BEL-00-TY-050M

3 Wire AC/DC Ordering code BCC01YZ BCC01ZU

Normally-open Part number C21 AE3-00-VY-150F C21 BE3-00-VY-150F

Ordering code BCC01YW BCC01ZN

Part number C21 AE3-00-TY-150F C21 BE3-00-TY-150F

Voltage rating 250 Vac/Vdc 250 Vac/Vdc 250 Vac/Vdc 250 Vac/Vdc

Amperage 4 A 4 A 4 A 4 A

Wire gauge 22 AWG 22 AWG 22 AWG 22 AWG

Jacket Yellow PVC or TPE Yellow PVC or TPE Yellow PVC or TPE Yellow PVC or TPE

Coupling nut Black epoxy coated zinc Black epoxy coated zinc Black epoxy coated zinc Black epoxy coated zincCable O.D.-3 wire versions (mm) 4.6 (V) / 5.0 (T) 4.6 (V) / 5.0 (T) 4.6 (V) / 6.0 (T) 4.6 (V) / 6.0 (T)

Protection IP 68 / NEMA 6P IP 68 / NEMA 6P IP 68 / NEMA 6P IP 68 / NEMA 6P

Ambient operating temperature -4 to 221 F -4 to 221 F -4 to 221 F -4 to 221 F

V = PVC cable (standard use)

T = TPE cable (welding applications)

DC 2-wire application solution: Use our AC/DC sensors with a converter cable for 2-wire DCapplications. For polarized replacements use C21 ENA-04-TY-003M-C and for Non-polarized

replacements use C21 ENA-04-TY-003M-D.

WeldRepel protectionaccessories

WeldRepel Wrap

Ordering code Part number Description

BAM0183 BKS PW-26/20-SI-TR-03,5 1" wide x 12 ftClear silicone wrap

BAM0182 BKS PW-51/30-SI-TR-11 2" wide x 36 ftClear silicone wrap

WeldRepel SheetsOrdering code Part number Length

BAM0179 BKS-PS-914/16-SI 3 ft x custom length in ft.

BAM017A BKS-PS-914/16-SI-00,91 3 ft x ft sheet

Specifications

Temperature rating -65 C to 233 C(-80 F to 450 F)

Thickness 1.58 mm

Max. length 165 ft per roll

WeldRepel Jacket (order by the meter)Ordering code Part number ID ID Roll size

BAM017C BKS-PT-7/16-SI 1/4" dia. 7 mm 15 m

BAM017F BKS-PT-10/16-SI 3/8" dia. 10 mm 15 m

BAM017W BKS-PT-13/16-SI 1/2" dia.* 13 mm 15 m*

BAM017M BKS-PT-16/16-SI 5/8" dia.** 16 mm** 15 m**

BAM017P BKS-PT-19/16-SI 3/4" dia. 19 mm 15 m

BAM07T BKS-PT-38/16-SI 1.5" dia. 38 mm 7.5 m

BAM17Y BKS-PT-50/16-SI 2" dia. 50 mm 7.5 m

Specifications

Temperature rating -85 F to 500 F

Electrical insulation rating 400 Volts/mil thickness (wrap only)

Elongation 300% (wrap only)

Material Clear Silicone

* Recommended for use with M12 (micro) single ended cables** Recommended for use with M12 (micro) double ended cables

Cables and WeldRepel AccessoriesMating cables

This brochure was printed with soy-basedinks on FSC Certified Paper made with 10%post consumer fiber. It represents Balluffscommitment to helping the environment.

object detection 156668 steelface sensors brochure

Documents