offshore/marine surplus equipment listing.pdf · offshore/marine surplus equipment 1: surplus...

Aiken Group Ltd, Crombie House, 72 – 90 Crombie Road, Aberdeen AB119QP

Tel: +44 (0) 1224 244300 W: www.aikengroup.com

Offshore/Marine Surplus Equipment

1: SURPLUS ANCHOR CHAIN/EQUIPPMENT

Please see following current Chain and Anchor availability from one of our

European Associates:

Certified Mooring chain

Dai: Grade: Quantity: Class: Located:

68 mm R3 stud 1200 mtrs DNV Norway

70 mm R3 stud 1200 mtrs ABS Netherlands


76 mm R4 stud 1500 mtr DNV Korea

76 mm R4 stud less 800 mtrs DNV Norway





103 mm R4S stud

less

2900 mtrs DNV Japan


120 mm R3S stud

less

200 mtrs BV Norway

120 mm R3S stud

less

4000 mtrs LRS UK


133 mm R3S stud 1700 mtrs LRS / DNV Norway





2: CERTIFIED RIG-ANCHORS

2-1 Flipper Delta or Superior Delta:

10 x 1000 kgs, 5 x 2000 kgs, 4 x 2500 kgs, 5 x 3000 kgs, 6 x 5000 kgs, 8 x 7000 kgs, 2

x 8000 kgs, 3 x 9000 kgs, 2 x 10,000 kgs, 2 x 12,000 kgs, 1 x 13,500 kgs, 2 x 18,000

kgs,3 x 40,000 kgs

2-2Stevpris mk5 or Drag mk5:

7 x 3000 kgs, 8 x 5000 kgs, 5 x 8000 kgs, 7 x 10,000 kgs, 3 x 12,000 kgs, 19 x

15,000 kgs,

4 x 16,000 kgs, 4 x 18,000 kgs, 6 x 20,000 kgs, 1 x 28,000 kgs, 6 x 35,000 kgs

2-3Bruce TS and Bruce FFTS:

2 x 9000 kgs, 6 x 15,000 kgs,

2-4Stevin:

5 x 15,000 kgs, 4 x 18,000k kgs,

2-5Danforth and LWT:

5 x 2000k gs, 2 x 2500 kgs, 6 x 3000 kgs, 2 x 4000 kgs, 2 x 5000 kgs, 3 x 7000 kgs, 5 x

9000 kgs

8 x 13,500 kgs, 3 x 15,000 kgs, 2 x 18,000 kgs

Also available items such as Kenter-Shackles, Swivels, Adaptors plus various other

accessories.



3: FPSO PRODUCTION PACKAGE (Full details on request)

Stored and Preserved in the UAE Middle East from new with no Operation to

date.

Manufacture red in Norway 2005 (Unused. Near perfect condition)

Designed for wide range of difficult production qualities and profiles

This is a 40,000bpd production unit.

Equipment available for only 15 days then it will be dismantled.

Original Purchase Cost $22,000,000 US Dollars

Current Sale Guide Price $2,500,000 US Dollars

Size & weight:

Separation Module:

- Size: 20 x 38 m

- Weight: Approx. 900 T dry

Flare Skid Size

- Size: 11 x 7 m


Manifold Skid

- Size: 9,3 x 6,3 m


Further technical information can be provided on request. Available for

immediate inspectoion



4: BRAND NEW (Cancelled Order) - PRIOR DIESEL COIL TUBING POWER PACK

for ZONE II HAZARDOUS AREA

The prime mover is a Caterpillar 3406 DITA engine rated at 490BHP. The engine is

fitted with a three pad pump drive, which is mounted directly to the

Engines fly wheel housing. Available Immediate with full warranty.



Outline Data

Hydraulic System: High pressure Semi Closed Loop

Hydraulic Circuits:

• Auxiliary

• BOP

• Injector

• Reel

• Level wind

• Priority

• Engine Coolant Radiator Fan

Maximum Hydraulic Pressure: 5000 PSI (344 Bar)

Engine Type: Caterpillar 3406 DITA

Engine Power: 490 BHP (366 bkW) – Based on SAE 1349 Standard Conditions

Emissions Certified: Tier I

Area of Operation Zone II: IIA T3

Operating Ambient Temperature: -20oC to + 50°C

Skid dimensions: 4,500 mm long x 2,438 mm wide x 3,109 mm high.

Weight: 15,000 Kgs.

Further technical information available on request. Offers Invited.

Location: UK



5: BRAND NEW (Stored/ Unused) – OFFSHORE VESSEL WELL TESTING

EQUIPMENT

Manufactured by Expro, the Well Testing Equipment that is on offer was originally

designed to be installed on-board the Scandinavian Vessel. The system was

assembled in 2012, has not been used and is currently in storage in Norway.

The system was designed for a total liquids throughput of 21,150bbls/day, with a

water cut of up to 40%, and a maximum gas capacity of 150MMscfd. DNV have

confirmed the system Sour Service rated.

The major component parts making up the well test package are:

Emergency Shutdown Valve · Data header · Choke Manifold · Separator · Surge

tank · Hydrocarbon storage tank · Flare knockout vessel · Water treatment · Hydro

cyclone vessel · Effluent pumps · Crude oil transfer pumps · 4 x Air compressors

(54m3/min each).

Original New Price: Circa $10,000,000 US Dollars

Current Guide Price: $2,500,000 US Dollars

Further technical information can be provided on request. - If interested, please

arrange a viewing.



6: NEW / UNUSED EQUIPMENT (USA / CANADA)

6-1. 100MMSCFD Turbo Expander Plant

6-2. 60MMSCFD Amine Sweetening (104 USGPM) / Refrigeration Skids

6-3. 50MMSCFD CO2 Removal Membrane Trains (2-off)

6-4. 36MMSCFD Amine Sweetening / Sulphur Recover Skids

6-5. 20MMSCFD Two Tower Mole Sieve Dehydration Skid 1998 PSI – Sour Service

6-6. 10,800 BBL. / Day Condensate Stabilizer Skid & 18MMBTU/H Heater – Sour

Service

6-7. 5,000 BBL. / Day Oil Battery

6-8. High Pressure (645 PSI) LPG Storage Tanks (4-off)

6-9. 50MMBTU/H Steam Generators - OTSG (2-off)

6-10. Pressure Swing Absorber Vessels, 138" ID x 23'-5" S/S x 500 PSI (6-off)

6-11. Vertical Condensate Separator Vessel, 102" ID x 24'-0" S/S x 501 PSI

Stainless Steel Lined

6-12. Horizontal Separator, 48" OD x 10'-0" S/S 1800 PSI Internally Coated with

Impreglon

6-13. Compressors, 4735 HP Caterpillar 3616TALE / Ariel KBZ/6 (2-off)

6-14. Dehydration Skid c/w 78" ID x 1900 PSIG Glycol Contactor – Sour Service

6-15. Inlet Separator Vessel, 168" ID x 80'-0" S/S x 254 PSI – Sour Service

6-16. Packed Glycol Contactor Tower, 36" OD x 2000 PSI - Sour Service

6-17. Amine Circulating Pump c/w 3000 HP Motor, 2019 USGPM @ 1822 PSI

6-18. H2S Scavenger Skid c/w 24" OD x 10'-0" S/S x 279 PSI Sweetening Tower

6-19. Three Phase Induction Motors, 750 HP @ 1789 RPM (3-off)

6-20.750 BBL. “Double Wall” Tank, Internally Coated & Insulated

6-21. Vertical Stainless Steel Sparger Vessel, 60" ID x 22'-7" S/S x 465 PSI

6-22. Shell & Pipe Heat Exchangers, 279.20 Ft.² 190 PSI Shell x 4500 PSI Pipe (2-

off)

6-23. Multi Bag (8 Bag) Filters, 4" 150# Inlet & Outlet (8-off)



7: USED EQUIPMENT – USA / CANADA:

7-1. 2-4MMSCFD Coal Bed Methane Facility, Separation, Dehydration,

Compassion & CO2 Removal

7-2. Acid Injection Compressors (2010), Ariel JGA/6 c/w 300 HP 575/60/3PH Motors

7-3. Trailer Mounted 5MMSCFD x 350 PSI Refrigeration Package (3-off Trailers)

7-4. Stainless Steel Flare Knockout Drum, 66" ID x 16'-0" S/S x 150 PSI

7-5. Horizontal Peco Filter. 42” ID x 16’-0” S/S x 1375 PSI – Sour Service

7-6. Amine Contactor Tower, 42” OD x 50’-0” S/S x 1400 PSI c/w 20 Trays

7-7. Stabilizer Tower, 30” ID x 56’-0” S/S x 570 PSI c/w 20 Trays

7-8. Winterized Camps, 50 & 94 Person

7-9. 50MMBTU/H Crude Oil Heater, 275 PSIG @ 698° F



8) NEW LINE PIPE READY FOR SHIPMENT SOUTH KOREA:

8-1 30” Dia x 12.7mm WT x 450m Total Length Rolled and Welded Pipe, ASTM

A671 class 22, Exxon Mobile Approved Supplier, all Plates used in the

Manufacture have been vacuum degassed including for USA most severe

category. Availability a result of recent Purchase Order that has now been

amended and are currently stored in South Korea.

8-2 36” Dia x 12.7mm WT x 160m Total Length Rolled and Welded Pipe, ASTM

A671 class 22, Exxon Mobile Approved Supplier, all Plates used in the

Manufacture have been vacuum degassed including for USA most severe

category. Availability as a result of recent Purchase Order that has now been

amended and are currently stored in South Korea.



9) NEW AND SURPLUS NEW EQUIPMENT READY FOR SHIPMENT:

9-1 Nitrogen Rejection Plant. All skid mounted ready for installation. Built in

2014 but not put into service. The NRU can Process 12 MMSCFD of gas. The

residue gas leaving the NRU will have an outlet nitrogen concentration of 2.0

mole percent or less, a carbon dioxide content of 1.0 mole percent or less and a

water content of no more than 7 pounds per million standard cubic feet. Plant

containing yet not limited to circa 40 different equipment packages. Any

required modifications can be completed by OEM if required. (Stored USA)

9-2 Coal Fired Power Generation Plant. Built new 2009 and completed 2011,

never used, 15MW, Turbine and Generator new from GE, Nuovo Pignone and

ABB in Europe, ready for dismantling and shipment, estimated purchase price

including cost for dismantling and shipment to Port USA to be around 25% of

original build cost of $103,000,000 US Dollars. USA EPC Contractor for

installation and commissioning. Other Units available. (Located USA)

9-3 Subsea Static Flexible Flow lines. Well stream, 6” ID x 9,768m (Total) in 7

lengths on 5 x Reels (Lengths between 1,414m & 2,566m), Sweet Static Oil / Gas

Service, Water Depth 146m Max, Service Temperature 90 Deg C Max, Design

Pressure 3450psi. Manufactured 2010. All complete with end Connection. (Ex

UK).

9-4 Manuli Diamondspir High Pressure Hoses. (Max 3040psi WP) 3” ID x 36m

long. 3-off identical Hoses available manufactured 2015. (Stored Internally

United Kingdom)

9-5 Lean Amine Circulating Pump. 1 x Unit, Crated and Stored from

New. (Stored Alberta Canada)

9-6 Molecular Sieve / Pressure Swing Adsorption Towers. 6 x available, built

2011, preserved. (Stored Alberta Canada)

9-7 Vertical Separator Vessel. 3 Phase Separator Internally Clad with 304 S/S,

built 2008, preserved. (Stored Alberta Canada)

9-8 Heat Exchanger, Shell and Tube (Pair). Built 2010, preserved. (Stored

Alberta Canada)

9-9 Mechanical Gas Refrigeration System. 60mmscfd, 7 Modules plus loose

equipment, New Build with potential OEM Warranty. (Stored Canada)

9-10 Various items of Drill Pipe, Casing, Cross-overs, Drilling Items etc. Unused

from new (plus also used good condition) located in several locations (UK and

Europe).



10) USED EQUIPMENT READY FOR SHIPMENT:

10-1 Lifeboats and Davits. 2 x Fassmer Model CI-T 10.7, Manufactured 2011, 70

Person each, Excellent Condition as mounted under Vessel Helideck. (Located

Europe)

10-2 Complete Early Production System for Offshore / Onshore. Built 2008 and

used for 5 years, Fully Certified. (Located Far East)

10-3 Coal bed Methane Plant. 2 to 4mmscfd, Decommissioned, Built 2008 and

closed 2012. (Located British Columbia Canada)

10-4 Drillship Decommissioning. 2 x Vessel’s built 2000, all Marine and Topside

Drilling and Processing Equipment. (Located Europe)

10-5 FPSO Surplus Warehouse including Marine and Process Spares plus

Hawsers, Valves, Helicopter Refueling etc. No OEM Documentation. (Located

Singapore)

10-6 Waukesha Engine Driven Dresser Rand Compressor Package.

2250bhp Waukesha P-9390GSI engine driven Dresser Rand HOSS compressor

equipped with four 11 inch diameter, 6 inch stroke, 800 psi MWP cylinders which

will compress 47.5 MMSCFD from a suction pressure of 200 psig to a discharge

pressure of 455 psig. Although not completely new, these late model low hour

units have been totally overhauled by Waukesha trained mechanics and brought

back to new unit standards. The compressor frame was similarly overhauled by

Dresser Rand trained mechanics and conforms to new unit tolerances. The

compressor cylinders has been totally refurbished with new valves, rings, packing,

gaskets, pistons and rods. The pulsation drums on the suction and discharge of

each cylinder as well as the suction scrubber for each unit will be new including

relief valves, automatic and manual dump valves, sight glasses, and pressure

gages. The jacket water and turbo water cooling coils will be tested and replaced

(if necessary) with new coils. (Located USA)

10-7 Offshore Solar H7502 Gas Turbine with Solar C334 Compressor.

Originally installed Offshore 1992 to boost and transmit Dry Gas via Pipeline to

shore, unit was decommissioned 1997 and subsequently the Compressor was

upgraded in 2006 and the entire Package and components overhauled and rebuilt

by the Wood Group. This complete package has since been internally stored and

maintained without use and is available for $850,000 US Dollars. (Located UAE)



10-8 Offshore Platform HPU.

Constructed from high Grade Stainless Steel and suitable for control of up to 4 x

Subsea Xmas Trees plus unmanned Platform Facilities which is in excellent

condition and currently internally stored and ready for onward Sale. (Located

United Kingdom)

USED EQUIPMENT COMING AVAILABLE:

Semisubmersible Floating Production Unit. Technical Data available – awaiting

Owners Approval for Marketing (Located Europe)

Floating Production Storage Offloading (FPSO) Vessel. Technical Data available.

Offshore Unmanned 3 x Leg, 2 x Wellhead Gas Platform. Jacket weighing

approximately 600T is anchored to the seabed in 40.6m Water Depth by 3 x 48” x

68m Piles, Wellhead Platform is approximately 100 Tonnes and consists of a

Cellar and Weather Deck, has no Processing Facilities, Accommodation or

Helideck. Facility Control is by ‘Line of Sight’ Microwave. Platform incorporates

10” Gas Export Riser, MEG Inhibitor Riser, 8” Import Riser, 2 x 8” Future Risers,

10” J-Tube, Control Umbilical. This Platform was installed circa 2005 and is now

being decommissioned and removed and made available for Sale. (Located

Europe)



11) CAMERON SURPLUS EQUIPMENT

All equipment unused with Cameron CoC/Data book. Paperwork available on

request.

All equipment manufactured in 2014, CoC valid up and till 2019.

11-1:18-3/4” 15K Type TL Double BOP (with API Monogram)

11-2:18-3/4” 15K Type TL Bonnets (4 units)

11-3:5.5” Pipe Ram Block f/ 18-15M T/TL BOP

11-4: VBR Ram Block, size 3-1/2” to 7-5/8”, f/ 18-15M T/TL BOP

11-5: Shear Ram Block f/ 18-15M T/TL BOP

11:6: 3-1/16” FLS Manual Gate Valves (4 units)

11-7: 3-1/16” FLS Gate Valves with Hydraulic Actuator (4 units)

11-8: 3-1/16” 15K BX-154 Studded Tee Assy (9 units)

11-9: Crossover Adapter, Flange 3-1/16” API 15K BX-154 X FIG2202 4” NOM.

Female Half Union (4 units)

11-10: 18-3/4” 15K BX-164 Test Stump w/ NBA 625 Inlay on Ring Groove

11-11:18-3/4” 15K BX-164 Drilling Spool, Studded Top Flanged Bottom

Test Mandrel 5.5” OD x 3.5” ID

Working Frame for above BOP



12) 2 X NEW / UN-USED BERGEN C25:33L8ACD, 4-STROKE, TURBOCHARGED,

INTERCOOLED, 8 CYLINDER, MARINE DIESEL ENGINE/GENERATOR SET

INCLUDING:

3480 bhp (2560kW) MCR @ 900 RPM

250MM Bore x 330MM Stroke

Electro-Hydraulic Actuator

Fuel Rack Transmitter

MMI Engine Instrument Panel

Pneumatic Displacement Starter

2-Stage Charge Air Cooler

Lube Oil Pump & Bypass Filter

Diesel Oil Booster Pump

Duplex Type Diesel Oil Filter w/ Changeover Valve (7-10 Micron Nominal)

Oil Mist Detector

Low Temperature Cooling Water Pump & Jacket Cooling Water Pump

Rig Saver Valves

ABS + ACCU Class Rating

AvK Brushless Alternator Model DIG150 m/8

2421kW (3459kVA)

3300V

3 Phase / 60 Hz / 900 RPM

0.7 PF

Single Bearing

Anti-Condensation Heater (220V)

Air/ Water Cooled

Stator Winding & Bearing Sensors

*The following items will be shipped loose:

* Silencers – 35 dB(A) – w/ Spark Arrestors & Expansion Joints

* Diesel Oil Heat Exchangers

* Nozzle Temperature Control Module

* Jacket Cooling Water Preheater & Thermostatic Valves for Jacket Water

Recirculation as well as Low Temperature

Fresh Water Circulation

* AVR for Generator

* Class Certificates



13) GENERATOR ENGINES

13-1. 6 X EMD MD 20-645-E9B diesel engines rated at 2500KW, 900rpm, each

driving 3125kva GE A20U24 generators

13-2. 5 X EMD MD 16E9B diesel engines rated at 3,070 hp driving 1 x 2,200 Kw

driving 4,160 VAC generators

13-3. 4 X EMD 16-645 E9B diesel engines rated at 2,181 kW, 900 rpm, each

driving 1 x 2,000 KVA Electro-Motive AB20-6 Synchronous generator

13-4. 1 X EMD MD 12-645-E8 diesel engines rated at 1050KW, 900rpm, each

driving 3125kva GE A20U24 generators

13-5. 6 X Caterpillar 3612 diesel engines rated at 3,300 kW, 900 rpm, each driving

1 x 4,715kVA Kato generator.

13-6. 1 X Caterpillar D399 diesel engine rated to 600 kW at 1800 rpm driving 1 x

Kato 750 kW generator.

13-6. 1 X Caterpillar 3508B diesel engine rated 731 kW, 900 rpm driving 1 x

Caterpillar SR4 generator.

13-7. 1 X Caterpillar 3304 diesel engines rated at 90KW 1800rpm, driving SR-4

generator

13-8. 8 X Wartsila Vasa 16V22 diesel motors rated to 3,250 hp each and 1 x each

ABB 3,215 kVA generator

13-9. 4 X Bergen KVBG-12 2200 hp engines, driving 4X1528KW, 600V, 60HZ,

generators

13-10. 1 X Cummins VTA 28-G2 diesel engine, driving 500KW, 440V, 60HZ,

generator

13-11. 1 X Detroit 16V92 diesel engine rated 550 kW, 1,800 rpm driving 1 x

Stewart Stevenson VGDT-550 generator.

13-12. 1 X Detroit diesel 16V149 825 kW diesel engine

13-13. 2 X D399 CAT Engine c/w GE alternator

13-14. 2 X 3516 CAT c/w Kato Alternator



14) MUD PUMPS

14-1. 3 x Continental Emsco FC 2200 triplex pumps, each driven by 2 x GE 752

1,130 hp traction motors.

14-2. 3 x Oil well A-1700 P.T. 1,600 hp triplex pumps, each driven by 2 x EMD D-79

DC 800 HP traction motors.

14-3. 3 x National Oil well 14-P-220 2,200 hp triplex pumps each driven by 2 x GE

752 Hi-Torque DC traction motors rated to 7,500 psi.

14-4. 1 x National Oil well 12-P-160 1,600 hp driven by 2 x GE 752 Hi-Torque

traction motors rated at 5,000 psi.

14-5. 2 x National 12-P-160 1,600 hp triplex pumps, each driven by two EMD

traction motors.

14-6. 1 x Gardner Denver PZ11 2,000 hp triplex pumps, driven by 2 x GE traction

motors.

14-7. 1 x Weatherford model E-447 Riser Booster pump rated for 5000 PSI

15) TOP DRIVES

15-1. Varco TDS4S Integral top drive Electric DC rated to 750 tons and driven by

GE 752 DC motors rated to 45,000 ft. lbs. of continuous torque

15-2. Varco TDS4S, 650 ton, with 1 x GE 752 motor, rated to 45,500 ft.-lbs.

continuous drilling torque in low gear

15-3. Varco TDS4S, 650 ton capacity, with a GE 752 High Torque Shunt motor

1100 hp DC, rated to 45,500 ft-lbs continuous drilling torque in low gear

15-4. Varco TDS4S, 650 ton capacity, GE752 hi torque, rated to 46,380 ft.-lbs.

continuous drilling torque in low gear.

15-5. Varco TDS 1000A 650 ton drilling capacity, with 62,500 ft. lbs. maximum

drilling torque in low gear

15-6. TDS11 Top Drive (more details can be provided if of interest)

15-7. TDS8A Top Drive (more details can be provided if of interest)



16) DRAWWORKS

16-1. National 1625 DE, 2 x EMD D-79-AMB electric motors; 1,500 hp, 1,27,320

lbs with 12 x 1-3/8 inch drilling lines.

16-2. National 2040 UDBE (L) 2,000,000 lbs. rated with 4 x GE 752 electric motors

5,000hp.

16-3. Continental Emsco C3 Type II, driven by 3 x GE 752 DC electric motors;

3,000 hp, Type SS Disc Brake

16-4. Continental Emsco Electro Hoist V draw works driven by 4 x GE 752 hi

torque motors rated at 5,000 hp each and load rated to 2,500,000 lbs. with 16

lines

16-5. Oil well E-3000, with 2 x GE752 electric motors; total input: 2,000 HP.

17) BOP STACKS

17-1. 18-3/4” 15K CIW Type TL BOP Stack, c/w 1 Double, 1 Single and 1 Annular

(COC expires 2016)

17-2. 18-3/4” 15K CIW Type TL BOP Stack, c/w 1 Double, 1 Single and 1 Annular

(COC expires 2017)

17-3. 18-3/4” 15K Hydril Type BOP Stack, c/w 2 Double and 1 Annular (COC

expires 2017)

17-4. 18-3/4” 15K Shaffer Type SL BOP Stack, c/w 2 Doubles and 1 Annular (COC

expires 2017)

17-5. 18-3/4” 10K Shaffer Type SL BOP Stack, c/w 2 Doubles and 1 Annular (COC

expires 2017)

17-6. 18-3/4” 10K CIW Type U2 BOP Stack, c/w 2 Doubles and 1 Annular

17-7. 18-3/4 15K Hydril BOP Stack, c/w 2 double and 1 Annular – 2 stack available

18) TENSIONERS

18-1. 8 x 80 kip Shaffer Wire Line Tensioners, 12.5 ft. maximum stroke.

18-2. 8 x 120 kip Shaffer Wire Line Tensioners, 12.5 ft. maximum stroke.

18-3. 10 x Shaffer 200 kip rating each. 12-1/2 ft. stroke with 50ft. wire line travel

18-4. 10 x Western Gear riser tensioners, 40 st each; 12.5 ft. maximum stroke and

50 ft. line travel.

18-4. 12 x Shaffer tensioners rated to 200 kip with a stroke of 12.5 ft. and 50 ft.

line travel.



19) COMPENSATORS

A. Retsco/Shaffer, 25 ft. stroke, 600 kips compensating; 1,500 kips locked

B. Shaffer 25/800 with a 25 ft. stroke and rated to 800,000 lbs. compensated load

capacity.

C. Shaffer Crown Mounted Compensator 25 ft. stroke 2,000 kips static capacity

active heave compensation

D. Shaffer 600K Operating, 1,500 kip locked, 25 ft stroke.

E. Western Gear, 25 ft. stroke (650 lt. locked) compensation

New Unused Equipment:

1. 2 x 18 ¾” 15K Shaffer Single BOP’s

2. 1 x 18 ¾’ 10 Shaffer Annular

3. 5 ½” DP, S135, HT55 Conns, HWDP, DC & Subs mfg by GP

4. 5 ½’ HWDP, HT55 Conns, mfg GP

5. Fishing Tools mfg NOV

6. Casing Running Tools mfg Varco

7. 5” DP G105 mfg GP

8. 2 x Rolls Royce Engines/Gensets

9. 2 x 500 HP Drillmec Workover Rigs

10. 36 x 15 Gallon, 3000 psi Accumulators Bottles

CRANES

A. Amclyde 35000 crane, 72ton @ 25ft radius, w/100ft boom (2 units)

B. Amclyde 20000 crane, 40ton @ 25ft radius, w/100ft boom

C. Bucyrus Erie MK-35 Pedestal Crane, 35ton @ 20ft radius, w/80ft boom

D. Bucyrus Erie MK-60 Pedestal Crane, 47ton @ 25ft radius, w/120ft boom

E. National OS-435, 52ton @ 30ft, w/150ft boom (2 units)

F. National OS-435HD, 37ton @ 35ft, w/150ft boom (2 units)

G. Seatrax 6032, 56ton @ 40ft, w/150ft boom

H. Seatrax 7228 w/110ft boom (2 units)

I. Seatrax 7228 w/100ft boom

J. Seatrax 4220 w/90ft boom



20) NEW/UNUSED DRILLERS CABIN AND CONTROLS

Title: 1393 Drillers Cabin and Controls

Built: 2011

Dimensions: 5.9m x 3.77m x 3.71m

Weight: 7.5kg

Condition: New/Unused

Documentation: Available complete

Location: UK

Availability: Immediate

offshore/marine surplus equipment listing.pdf · offshore/marine surplus equipment 1: surplus...

Documents