operational excellence - solutions for emerson control systems
TRANSCRIPT
SOLUTIONS FOR emeRSON CONTROL SYSTemS
OpeRaTIONaL exCeLLeNCe
pROCeSS aUTOmaTION
PROTECTING YOUR PROCESS
YOUR appLICaTION – OUR SOLUTION
INTRINSIC SaFeTY INTeRFaCINgIsolated barriers and zener barriers – DIN rail or termination board mounted – IEC 61508 SIL 2/3 approved
SIgNaL CONdITIONINgIsolated switch amplifiers, transmitter power supplies, repeaters, signal converters, and trip amplifiers – IEC 61508 SIL 2/3 approved
FIeLdbUS INFRaSTRUCTUReFOUNDATION fieldbus and PROFIBUS power supplies, diagnostics, and distribution
RemOTe I/O SYSTemSA range of safe and hazardous area (Division 2 and Zone 1, 2) mounting modular I/O
INdUSTRIaL mONITORS aNd HmI SOLUTIONSPanels PCs and remote monitors as well as operator panels and peripherals like barcode readers
pURge aNd pReSSURIZaTIONPurge and pressurization enclosure solutions for hazardous area Division 2 and Zone 1, 2 locations
CONNeCTION aNd CONTROLA wide range of EEx e and EEx d enclosures and control stations in stainless steel, GRP and cast metals
pOweR SUppLIeSHigh-integrity power supplies specifically designed for mission-critical applications – N+1 or redundant
wIReLeSS NeTwORkINgWireless gateways and adapters suitable for hazardous and safe area applications using HART technology
SURge pROTeCTIONSurge protection devices to safeguard the integrity of your entire process
pepperl+Fuchs is the undisputed market leader in intrinsically safe explosion protection components and offers a complete range of customized solutions for hazardous areas and critical applications.
Our solutions are employed in a wide variety of industries and applications including oil and gas, chemical, pharmaceutical, waste water management, power plants, distilleries, and many more. With the most comprehensive range of industrial automation products available today, Pepperl+Fuchs is uniquely qualified to provide professional service, expert support, and unmatched performance – whatever your application might be.
Local technical and commercial service ensures constant support from your initial design throughout the life cycle of your plant. With over 60 years of experience and a distinctive spirit of invention, Pepperl+Fuchs is your reliable partner in the process industry – providing innovative products that pave the way for increased efficiency and safety.
www.emerson.pepperl-fuchs.com
5 1
8
4
2
6
7
3
PROTECTING YOUR PROCESS
Subject to modifications • Copyright Pepperl+Fuchs • Printed in Germany • Part No. 231315 09/11 01
For over a half century, Pepperl+Fuchs has been continually providing new concepts for the world of process automation. Our company sets standards in quality and innovative technology. We develop, produce and distribute electronic interface modules, Human-Machine Interfaces and hazardous location protection equipment on a global scale, meeting the most demanding needs of industry. Resulting from our world-wide presence and our high flexibility in production and customer service, we are able to individually offer complete solutions – wherever and whenever you need us. We are the recognized experts in our technologies – Pepperl+Fuchs has earned a strong reputation by supplying the world’s largest process industry companies with the broadest line of proven components for a diverse range of applications.
www.pepperl-fuchs.com
pROCeSS aUTOmaTION – pROTeCTINg YOUR pROCeSS
Southern/eastern europe HeadquartersPepperl+Fuchs s.r.l. Sulbiate (MB) · ItalyTel. +39 039 62921e-mail: [email protected]
Northern europe HeadquartersPepperl+Fuchs GB Ltd. Oldham · EnglandTel. +44 161 6336431e-mail: [email protected]
Southern america HeadquartersPepperl+Fuchs Ltda.São Bernardo do Campo · SP · Brazil Tel. +55 11 4007 1448 e-mail: [email protected]
worldwide/german Headquarters Pepperl+Fuchs GmbH Mannheim · GermanyTel. +49 621 776 2222e-mail: [email protected]
North/Central america Headquarters Pepperl+Fuchs Inc. Twinsburg · Ohio · USATel. +1 330 486 0002e-mail: [email protected]
western europe & africa HeadquartersPepperl+Fuchs N.V. Schoten/Antwerp · BelgiumTel. +32 3 6442500e-mail: [email protected]
asia pacific HeadquartersPepperl+Fuchs PTE Ltd. SingaporeCompany Registration No. 199003130ETel. +65 6779 9091e-mail: [email protected]
middle east/India HeadquartersPepperl+Fuchs M.E (FZE)Dubai · UAETel. +971 4 883 8378e-mail: [email protected]
1
2
3
4
5
6
7
8
SOLUTIONS FOR emeRSON CONTROL SYSTemS
partners in process automation with emerson process management for Intrinsic Safety
partners in process automation with emerson process management for the digital plant
partners in process automation with emerson process management for Integrated Solutions
Pepperl+Fuchs’ range of galvanic isolated and intrinsic safety solutions provides the ideal interface for the Emerson DeltaV control system and the Emerson DeltaV Safety Instrumented System (SIS). All solutions offer a wide range of module types to interface with all of the different variations of field devices on the market. In order to simplify customer implementation and operation of safe process plants in accordance with IEC 61511, Emerson and Pepperl+Fuchs are able to offer solutions that are suitable for use in SIL2 and SIL3 safety applications in compliance with the stringent international standard IEC 61508 for functional safety.
The FieldConnex range of FOUNDATIONTM fieldbus infrastructure components from Pepperl+Fuchs provides a total solution between the Emerson DeltaV control system or the Emerson Ovation control system and field devices, encompassing all the components required to build a fully digital plant. Using the latest fieldbus interface technologies and standards, Pepperl+Fuchs, in tandem with Emerson, is able to offer the complete solution for the connection of fieldbus power. FieldConnex is the infrastructure of choice for FOUNDATIONTM fieldbus H1. Power supplies and process interfaces make the fieldbus physical layer a manageable asset. The High-Power Trunk concept, the process industry’s de facto standard, maximizes the number of devices per segment and cable distances in any hazardous area. In combination, FieldConnex power supplies, FieldBarriers, and Segment Protectors enable the right explosion protection for your process plant.
Together, Pepperl+Fuchs and Emerson Process Management provide a wide range of integrated solutions for our common customers. These solutions include the rugged VisuNet industrial direct and remote monitors as well as AS-Interface bus and HART mulitplexer products. The industrial direct and remote monitors are designed for harsh and hazardous environments.
k-SYSTem FOR deltaV aNd deltaV SIS pOweR HUb
VISUNeT INdUSTRIaL dIReCT mONITORS
H-SYSTem FOR deltaV CONTROL SYSTem
SegmeNT pROTeCTOR COUpLeS TRUNk TO SpURS
VISUNeT INdUSTRIaL RemOTe mONITORS aS-INTeRFaCe pROdUCTS
HaRT INTeRFaCe SOLUTIONS
INdUSTRIaL pOweR SUppLY
Fb RemOTe I/O FOR ZONe 1
FIeLdbaRRIeR COUpLeS TRUNk TO IS SpURS
adVaNCed dIagNOSTIC mOdULe
With more than 150 modules, K-System is the leading portfolio of isolated barriers for intrinsic safety applications. K-System is a full line of DIN rail mounted isolators packed with features that make process control interface applications simple to design and easy to install. Emerson Alliance Program approved for use with DeltaV and DeltaV SIS.
The FieldConnex Power Hub is a modular power supply for FOUNDATION fieldbus H1. It features single segment integrity and 1:1 redundancy to ensure high segment availability. Eight-segment Power Hubs are designed for lowest, best-in-class heat dissipation allowing for the highest packing density in the control room cabinet today. Emerson Alliance Program approved.
VisuNet industrial monitors are engineered to endure the harsh, unyielding environment of the plant floor. VisuNet monitors are available for Class I, Division 2, Zone 2 and non hazardous versions, as well as versions that meet GMP requirements. Emerson Alliance Program approved.
VisuNet remote monitors can be connected to every Ethernet based network without any additional components. VisuNet remote monitors are available for Zone 1, 21 as well as for Zone 2, 22 and as a GMP version. Emerson Alliance Program approved.
Each H-System HART multiplexer provides communication to 32 HART devices. An RS485 network is built by multidropping the HiD Mux2700 multiplexers. The HART multiplexer system can be easily integrated with the Emerson AMS Field Device Manager.
AS-Interface bus is a great complement for FOUNDATION fieldbus H1 and a great solution for low-cost digital I/O. A wide range of AS-Interface bus based products makes the solution easy. AS-Interface bus products can easily be integrated with the DeltaV control system.
The H-System is a full line of termination board installed, DIN rail mounted isolators. All intrinsic safety barriers are suitable for Zone 2, Division 2 installations with I/O connecting to the Zone 0, 1 and Division 1 area. Emerson Alliance Program approved.
Segment Protectors ensure high fieldbus segment availability. The FieldConnex Segment Protectors features an excellent electronic design and it can be delivered prewired in an enclosure – tailored to your specific requirements. Emerson Alliance Program approved.
The PS3500 power supply is the foundation of uninterrupted process power. It is specifically designed for mission-critical applications and their need for reliable power. The high-integrity power supplies meet Class I, Division 2 and ATEX Zone 2 requirements.
The FB Remote I/O system is suitable for greenfield sites as well as plant retrofits using the existing wiring. PROFIBUS DP solution features HART pass-through to enable easy integrat-ion with AMS Suite. SIL2 is available for selected digital and analog output modules using a bus independent hardware shutdown. The system is also available with an Ethernet option.
FieldBarriers ensure high fieldbus segment availability and provide intrinsic safety spurs. To meet the unique needs, of our customers, FieldBarriers are offered in a modular field junction box system, providing a custom-fit solution for your application. Emerson Alliance Program approved.
An expert system analyzes the physical layer and offers pointed advice in clear text. This enables precise, planned response and pro-active plant upkeep. It is integrated with the Emerson AMS Field Device Manager Alert Monitor. Emerson Alliance Program approved.
n DIN rail mounted systemn 12.5mm compact design
with KC modules; smallest footprint installation
n Full galvanic isolationn SIL2 and SIL3 per
IEC 611508n HART support for analog I/O
n Smallest footprint, least cabinet space
n Lowest power dissipation, highest power efficiency
n Highest MTBFn Single segment integrity
with 1:1 redundancy
n Class I, Division 2, Zone 2n 15” or 19” standard
display or 22” widescreen display
n Multiple mounting optionsn Black painted steel or
stainless steel bezels (Type 4X)
n Resistive touchscreen option
n DIN rail mounted termination board
n Quick-LOK for easy module mounting
n Full galvanic isolationn SIL2 and SIL3 per
IEC 611508n HART support for analog I/On Requires 30% less space
than competitive systems
n Short-circuit protectionn Installation and devices in
Zone 2, Division 2n 4 to 12 outputs
nonincendive (Ex nL) or intrinsically safe (Ex ic)
n Easy DIN rail mounting or optional field enclosures
n Digital data transfer via Ethernet
n Microsoft RDP is standard with Emerson, but Citrix ICA and VNC protocol are also available
n Zone 1, 21 (ATEX, IEC), Zone 2, 22 (ATEX), GMP
n 19" for EX1 and GMP and 22" widescreen display for GMP only
n IP66 protection
n High speed n Low cost n Quick and easy installation n Wide variety of digital I/O
modules
n Compatible with AMS Device Manager 6.0, 6.1 and 6.2
n RS485 serial data connection
n Multi-drop in a network of up to 31 multiplexers and 992 HART devices
n Support for HART Rev. 6 n Enhanced noise detection
algorithmn Enhanced communication
checks and recovery
n Easy installation and a small footprint enable best use of cabinet space
n N+1 power redundancy is an affordable redundancy method that guarantees system functionality even during a supply failure
n Simple hot-swappable module removal without a system shutdown
n Natural convection cooling with its fanless design
n Intrinsically safe process I/O or increased safety I/O
n Suitable to install in Zone 1; I/O in Zone 0, Zone 1, Zone 2
n Rugged, encapsulated modules for hostile environments
n Hot swappable modules without a hot work permit
n Communication via PROFIBUS DP (with HART) or FOUNDATION Fieldbus
n Installation in Zone 1, Division 2
n Devices in Zone 0, Division 1
n Galvanic isolation, short-circuit protection and intrinsic safety
n Easy DIN rail mounting or optional field enclosures
n Continuously monitors the fieldbus physical layer signalling
n Measures key fieldbus parameters, including jitter and unbalance
n Self-configuringn Generates fieldbus system
reportsn Integrated with Emerson
AMS Alert Monitor
SOLUTIONS FOR emeRSON CONTROL SYSTemS
partners in process automation with emerson process management for Intrinsic Safety
partners in process automation with emerson process management for the digital plant
partners in process automation with emerson process management for Integrated Solutions
Pepperl+Fuchs’ range of galvanic isolated and intrinsic safety solutions provides the ideal interface for the Emerson DeltaV control system and the Emerson DeltaV Safety Instrumented System (SIS). All solutions offer a wide range of module types to interface with all of the different variations of field devices on the market. In order to simplify customer implementation and operation of safe process plants in accordance with IEC 61511, Emerson and Pepperl+Fuchs are able to offer solutions that are suitable for use in SIL2 and SIL3 safety applications in compliance with the stringent international standard IEC 61508 for functional safety.
The FieldConnex range of FOUNDATIONTM fieldbus infrastructure components from Pepperl+Fuchs provides a total solution between the Emerson DeltaV control system or the Emerson Ovation control system and field devices, encompassing all the components required to build a fully digital plant. Using the latest fieldbus interface technologies and standards, Pepperl+Fuchs, in tandem with Emerson, is able to offer the complete solution for the connection of fieldbus power. FieldConnex is the infrastructure of choice for FOUNDATIONTM fieldbus H1. Power supplies and process interfaces make the fieldbus physical layer a manageable asset. The High-Power Trunk concept, the process industry’s de facto standard, maximizes the number of devices per segment and cable distances in any hazardous area. In combination, FieldConnex power supplies, FieldBarriers, and Segment Protectors enable the right explosion protection for your process plant.
Together, Pepperl+Fuchs and Emerson Process Management provide a wide range of integrated solutions for our common customers. These solutions include the rugged VisuNet industrial direct and remote monitors as well as AS-Interface bus and HART mulitplexer products. The industrial direct and remote monitors are designed for harsh and hazardous environments.
k-SYSTem FOR deltaV aNd deltaV SIS pOweR HUb
VISUNeT INdUSTRIaL dIReCT mONITORS
H-SYSTem FOR deltaV CONTROL SYSTem
SegmeNT pROTeCTOR COUpLeS TRUNk TO SpURS
VISUNeT INdUSTRIaL RemOTe mONITORS aS-INTeRFaCe pROdUCTS
HaRT INTeRFaCe SOLUTIONS
INdUSTRIaL pOweR SUppLY
Fb RemOTe I/O FOR ZONe 1
FIeLdbaRRIeR COUpLeS TRUNk TO IS SpURS
adVaNCed dIagNOSTIC mOdULe
With more than 150 modules, K-System is the leading portfolio of isolated barriers for intrinsic safety applications. K-System is a full line of DIN rail mounted isolators packed with features that make process control interface applications simple to design and easy to install. Emerson Alliance Program approved for use with DeltaV and DeltaV SIS.
The FieldConnex Power Hub is a modular power supply for FOUNDATION fieldbus H1. It features single segment integrity and 1:1 redundancy to ensure high segment availability. Eight-segment Power Hubs are designed for lowest, best-in-class heat dissipation allowing for the highest packing density in the control room cabinet today. Emerson Alliance Program approved.
VisuNet industrial monitors are engineered to endure the harsh, unyielding environment of the plant floor. VisuNet monitors are available for Class I, Division 2, Zone 2 and non hazardous versions, as well as versions that meet GMP requirements. Emerson Alliance Program approved.
VisuNet remote monitors can be connected to every Ethernet based network without any additional components. VisuNet remote monitors are available for Zone 1, 21 as well as for Zone 2, 22 and as a GMP version. Emerson Alliance Program approved.
Each H-System HART multiplexer provides communication to 32 HART devices. An RS485 network is built by multidropping the HiD Mux2700 multiplexers. The HART multiplexer system can be easily integrated with the Emerson AMS Field Device Manager.
AS-Interface bus is a great complement for FOUNDATION fieldbus H1 and a great solution for low-cost digital I/O. A wide range of AS-Interface bus based products makes the solution easy. AS-Interface bus products can easily be integrated with the DeltaV control system.
The H-System is a full line of termination board installed, DIN rail mounted isolators. All intrinsic safety barriers are suitable for Zone 2, Division 2 installations with I/O connecting to the Zone 0, 1 and Division 1 area. Emerson Alliance Program approved.
Segment Protectors ensure high fieldbus segment availability. The FieldConnex Segment Protectors features an excellent electronic design and it can be delivered prewired in an enclosure – tailored to your specific requirements. Emerson Alliance Program approved.
The PS3500 power supply is the foundation of uninterrupted process power. It is specifically designed for mission-critical applications and their need for reliable power. The high-integrity power supplies meet Class I, Division 2 and ATEX Zone 2 requirements.
The FB Remote I/O system is suitable for greenfield sites as well as plant retrofits using the existing wiring. PROFIBUS DP solution features HART pass-through to enable easy integrat-ion with AMS Suite. SIL2 is available for selected digital and analog output modules using a bus independent hardware shutdown. The system is also available with an Ethernet option.
FieldBarriers ensure high fieldbus segment availability and provide intrinsic safety spurs. To meet the unique needs, of our customers, FieldBarriers are offered in a modular field junction box system, providing a custom-fit solution for your application. Emerson Alliance Program approved.
An expert system analyzes the physical layer and offers pointed advice in clear text. This enables precise, planned response and pro-active plant upkeep. It is integrated with the Emerson AMS Field Device Manager Alert Monitor. Emerson Alliance Program approved.
n DIN rail mounted systemn 12.5mm compact design
with KC modules; smallest footprint installation
n Full galvanic isolationn SIL2 and SIL3 per
IEC 611508n HART support for analog I/O
n Smallest footprint, least cabinet space
n Lowest power dissipation, highest power efficiency
n Highest MTBFn Single segment integrity
with 1:1 redundancy
n Class I, Division 2, Zone 2n 15” or 19” standard
display or 22” widescreen display
n Multiple mounting optionsn Black painted steel or
stainless steel bezels (Type 4X)
n Resistive touchscreen option
n DIN rail mounted termination board
n Quick-LOK for easy module mounting
n Full galvanic isolationn SIL2 and SIL3 per
IEC 611508n HART support for analog I/On Requires 30% less space
than competitive systems
n Short-circuit protectionn Installation and devices in
Zone 2, Division 2n 4 to 12 outputs
nonincendive (Ex nL) or intrinsically safe (Ex ic)
n Easy DIN rail mounting or optional field enclosures
n Digital data transfer via Ethernet
n Microsoft RDP is standard with Emerson, but Citrix ICA and VNC protocol are also available
n Zone 1, 21 (ATEX, IEC), Zone 2, 22 (ATEX), GMP
n 19" for EX1 and GMP and 22" widescreen display for GMP only
n IP66 protection
n High speed n Low cost n Quick and easy installation n Wide variety of digital I/O
modules
n Compatible with AMS Device Manager 6.0, 6.1 and 6.2
n RS485 serial data connection
n Multi-drop in a network of up to 31 multiplexers and 992 HART devices
n Support for HART Rev. 6 n Enhanced noise detection
algorithmn Enhanced communication
checks and recovery
n Easy installation and a small footprint enable best use of cabinet space
n N+1 power redundancy is an affordable redundancy method that guarantees system functionality even during a supply failure
n Simple hot-swappable module removal without a system shutdown
n Natural convection cooling with its fanless design
n Intrinsically safe process I/O or increased safety I/O
n Suitable to install in Zone 1; I/O in Zone 0, Zone 1, Zone 2
n Rugged, encapsulated modules for hostile environments
n Hot swappable modules without a hot work permit
n Communication via PROFIBUS DP (with HART) or FOUNDATION Fieldbus
n Installation in Zone 1, Division 2
n Devices in Zone 0, Division 1
n Galvanic isolation, short-circuit protection and intrinsic safety
n Easy DIN rail mounting or optional field enclosures
n Continuously monitors the fieldbus physical layer signalling
n Measures key fieldbus parameters, including jitter and unbalance
n Self-configuringn Generates fieldbus system
reportsn Integrated with Emerson
AMS Alert Monitor
SOLUTIONS FOR emeRSON CONTROL SYSTemS
partners in process automation with emerson process management for Intrinsic Safety
partners in process automation with emerson process management for the digital plant
partners in process automation with emerson process management for Integrated Solutions
Pepperl+Fuchs’ range of galvanic isolated and intrinsic safety solutions provides the ideal interface for the Emerson DeltaV control system and the Emerson DeltaV Safety Instrumented System (SIS). All solutions offer a wide range of module types to interface with all of the different variations of field devices on the market. In order to simplify customer implementation and operation of safe process plants in accordance with IEC 61511, Emerson and Pepperl+Fuchs are able to offer solutions that are suitable for use in SIL2 and SIL3 safety applications in compliance with the stringent international standard IEC 61508 for functional safety.
The FieldConnex range of FOUNDATIONTM fieldbus infrastructure components from Pepperl+Fuchs provides a total solution between the Emerson DeltaV control system or the Emerson Ovation control system and field devices, encompassing all the components required to build a fully digital plant. Using the latest fieldbus interface technologies and standards, Pepperl+Fuchs, in tandem with Emerson, is able to offer the complete solution for the connection of fieldbus power. FieldConnex is the infrastructure of choice for FOUNDATIONTM fieldbus H1. Power supplies and process interfaces make the fieldbus physical layer a manageable asset. The High-Power Trunk concept, the process industry’s de facto standard, maximizes the number of devices per segment and cable distances in any hazardous area. In combination, FieldConnex power supplies, FieldBarriers, and Segment Protectors enable the right explosion protection for your process plant.
Together, Pepperl+Fuchs and Emerson Process Management provide a wide range of integrated solutions for our common customers. These solutions include the rugged VisuNet industrial direct and remote monitors as well as AS-Interface bus and HART mulitplexer products. The industrial direct and remote monitors are designed for harsh and hazardous environments.
k-SYSTem FOR deltaV aNd deltaV SIS pOweR HUb
VISUNeT INdUSTRIaL dIReCT mONITORS
H-SYSTem FOR deltaV CONTROL SYSTem
SegmeNT pROTeCTOR COUpLeS TRUNk TO SpURS
VISUNeT INdUSTRIaL RemOTe mONITORS aS-INTeRFaCe pROdUCTS
HaRT INTeRFaCe SOLUTIONS
INdUSTRIaL pOweR SUppLY
Fb RemOTe I/O FOR ZONe 1
FIeLdbaRRIeR COUpLeS TRUNk TO IS SpURS
adVaNCed dIagNOSTIC mOdULe
With more than 150 modules, K-System is the leading portfolio of isolated barriers for intrinsic safety applications. K-System is a full line of DIN rail mounted isolators packed with features that make process control interface applications simple to design and easy to install. Emerson Alliance Program approved for use with DeltaV and DeltaV SIS.
The FieldConnex Power Hub is a modular power supply for FOUNDATION fieldbus H1. It features single segment integrity and 1:1 redundancy to ensure high segment availability. Eight-segment Power Hubs are designed for lowest, best-in-class heat dissipation allowing for the highest packing density in the control room cabinet today. Emerson Alliance Program approved.
VisuNet industrial monitors are engineered to endure the harsh, unyielding environment of the plant floor. VisuNet monitors are available for Class I, Division 2, Zone 2 and non hazardous versions, as well as versions that meet GMP requirements. Emerson Alliance Program approved.
VisuNet remote monitors can be connected to every Ethernet based network without any additional components. VisuNet remote monitors are available for Zone 1, 21 as well as for Zone 2, 22 and as a GMP version. Emerson Alliance Program approved.
Each H-System HART multiplexer provides communication to 32 HART devices. An RS485 network is built by multidropping the HiD Mux2700 multiplexers. The HART multiplexer system can be easily integrated with the Emerson AMS Field Device Manager.
AS-Interface bus is a great complement for FOUNDATION fieldbus H1 and a great solution for low-cost digital I/O. A wide range of AS-Interface bus based products makes the solution easy. AS-Interface bus products can easily be integrated with the DeltaV control system.
The H-System is a full line of termination board installed, DIN rail mounted isolators. All intrinsic safety barriers are suitable for Zone 2, Division 2 installations with I/O connecting to the Zone 0, 1 and Division 1 area. Emerson Alliance Program approved.
Segment Protectors ensure high fieldbus segment availability. The FieldConnex Segment Protectors features an excellent electronic design and it can be delivered prewired in an enclosure – tailored to your specific requirements. Emerson Alliance Program approved.
The PS3500 power supply is the foundation of uninterrupted process power. It is specifically designed for mission-critical applications and their need for reliable power. The high-integrity power supplies meet Class I, Division 2 and ATEX Zone 2 requirements.
The FB Remote I/O system is suitable for greenfield sites as well as plant retrofits using the existing wiring. PROFIBUS DP solution features HART pass-through to enable easy integrat-ion with AMS Suite. SIL2 is available for selected digital and analog output modules using a bus independent hardware shutdown. The system is also available with an Ethernet option.
FieldBarriers ensure high fieldbus segment availability and provide intrinsic safety spurs. To meet the unique needs, of our customers, FieldBarriers are offered in a modular field junction box system, providing a custom-fit solution for your application. Emerson Alliance Program approved.
An expert system analyzes the physical layer and offers pointed advice in clear text. This enables precise, planned response and pro-active plant upkeep. It is integrated with the Emerson AMS Field Device Manager Alert Monitor. Emerson Alliance Program approved.
n DIN rail mounted systemn 12.5mm compact design
with KC modules; smallest footprint installation
n Full galvanic isolationn SIL2 and SIL3 per
IEC 611508n HART support for analog I/O
n Smallest footprint, least cabinet space
n Lowest power dissipation, highest power efficiency
n Highest MTBFn Single segment integrity
with 1:1 redundancy
n Class I, Division 2, Zone 2n 15” or 19” standard
display or 22” widescreen display
n Multiple mounting optionsn Black painted steel or
stainless steel bezels (Type 4X)
n Resistive touchscreen option
n DIN rail mounted termination board
n Quick-LOK for easy module mounting
n Full galvanic isolationn SIL2 and SIL3 per
IEC 611508n HART support for analog I/On Requires 30% less space
than competitive systems
n Short-circuit protectionn Installation and devices in
Zone 2, Division 2n 4 to 12 outputs
nonincendive (Ex nL) or intrinsically safe (Ex ic)
n Easy DIN rail mounting or optional field enclosures
n Digital data transfer via Ethernet
n Microsoft RDP is standard with Emerson, but Citrix ICA and VNC protocol are also available
n Zone 1, 21 (ATEX, IEC), Zone 2, 22 (ATEX), GMP
n 19" for EX1 and GMP and 22" widescreen display for GMP only
n IP66 protection
n High speed n Low cost n Quick and easy installation n Wide variety of digital I/O
modules
n Compatible with AMS Device Manager 6.0, 6.1 and 6.2
n RS485 serial data connection
n Multi-drop in a network of up to 31 multiplexers and 992 HART devices
n Support for HART Rev. 6 n Enhanced noise detection
algorithmn Enhanced communication
checks and recovery
n Easy installation and a small footprint enable best use of cabinet space
n N+1 power redundancy is an affordable redundancy method that guarantees system functionality even during a supply failure
n Simple hot-swappable module removal without a system shutdown
n Natural convection cooling with its fanless design
n Intrinsically safe process I/O or increased safety I/O
n Suitable to install in Zone 1; I/O in Zone 0, Zone 1, Zone 2
n Rugged, encapsulated modules for hostile environments
n Hot swappable modules without a hot work permit
n Communication via PROFIBUS DP (with HART) or FOUNDATION Fieldbus
n Installation in Zone 1, Division 2
n Devices in Zone 0, Division 1
n Galvanic isolation, short-circuit protection and intrinsic safety
n Easy DIN rail mounting or optional field enclosures
n Continuously monitors the fieldbus physical layer signalling
n Measures key fieldbus parameters, including jitter and unbalance
n Self-configuringn Generates fieldbus system
reportsn Integrated with Emerson
AMS Alert Monitor
SOLUTIONS FOR emeRSON CONTROL SYSTemS
OpeRaTIONaL exCeLLeNCe
pROCeSS aUTOmaTION
PROTECTING YOUR PROCESS
YOUR appLICaTION – OUR SOLUTION
INTRINSIC SaFeTY INTeRFaCINgIsolated barriers and zener barriers – DIN rail or termination board mounted – IEC 61508 SIL 2/3 approved
SIgNaL CONdITIONINgIsolated switch amplifiers, transmitter power supplies, repeaters, signal converters, and trip amplifiers – IEC 61508 SIL 2/3 approved
FIeLdbUS INFRaSTRUCTUReFOUNDATION fieldbus and PROFIBUS power supplies, diagnostics, and distribution
RemOTe I/O SYSTemSA range of safe and hazardous area (Division 2 and Zone 1, 2) mounting modular I/O
INdUSTRIaL mONITORS aNd HmI SOLUTIONSPanels PCs and remote monitors as well as operator panels and peripherals like barcode readers
pURge aNd pReSSURIZaTIONPurge and pressurization enclosure solutions for hazardous area Division 2 and Zone 1, 2 locations
CONNeCTION aNd CONTROLA wide range of EEx e and EEx d enclosures and control stations in stainless steel, GRP and cast metals
pOweR SUppLIeSHigh-integrity power supplies specifically designed for mission-critical applications – N+1 or redundant
wIReLeSS NeTwORkINgWireless gateways and adapters suitable for hazardous and safe area applications using HART technology
SURge pROTeCTIONSurge protection devices to safeguard the integrity of your entire process
pepperl+Fuchs is the undisputed market leader in intrinsically safe explosion protection components and offers a complete range of customized solutions for hazardous areas and critical applications.
Our solutions are employed in a wide variety of industries and applications including oil and gas, chemical, pharmaceutical, waste water management, power plants, distilleries, and many more. With the most comprehensive range of industrial automation products available today, Pepperl+Fuchs is uniquely qualified to provide professional service, expert support, and unmatched performance – whatever your application might be.
Local technical and commercial service ensures constant support from your initial design throughout the life cycle of your plant. With over 60 years of experience and a distinctive spirit of invention, Pepperl+Fuchs is your reliable partner in the process industry – providing innovative products that pave the way for increased efficiency and safety.
www.emerson.pepperl-fuchs.com
5 1
8
4
2
6
7
3
PROTECTING YOUR PROCESS
Subject to modifications • Copyright Pepperl+Fuchs • Printed in Germany • Part No. 231315 09/11 01
For over a half century, Pepperl+Fuchs has been continually providing new concepts for the world of process automation. Our company sets standards in quality and innovative technology. We develop, produce and distribute electronic interface modules, Human-Machine Interfaces and hazardous location protection equipment on a global scale, meeting the most demanding needs of industry. Resulting from our world-wide presence and our high flexibility in production and customer service, we are able to individually offer complete solutions – wherever and whenever you need us. We are the recognized experts in our technologies – Pepperl+Fuchs has earned a strong reputation by supplying the world’s largest process industry companies with the broadest line of proven components for a diverse range of applications.
www.pepperl-fuchs.com
pROCeSS aUTOmaTION – pROTeCTINg YOUR pROCeSS
Southern/eastern europe HeadquartersPepperl+Fuchs s.r.l. Sulbiate (MB) · ItalyTel. +39 039 62921e-mail: [email protected]
Northern europe HeadquartersPepperl+Fuchs GB Ltd. Oldham · EnglandTel. +44 161 6336431e-mail: [email protected]
Southern america HeadquartersPepperl+Fuchs Ltda.São Bernardo do Campo · SP · Brazil Tel. +55 11 4007 1448 e-mail: [email protected]
worldwide/german Headquarters Pepperl+Fuchs GmbH Mannheim · GermanyTel. +49 621 776 2222e-mail: [email protected]
North/Central america Headquarters Pepperl+Fuchs Inc. Twinsburg · Ohio · USATel. +1 330 486 0002e-mail: [email protected]
western europe & africa HeadquartersPepperl+Fuchs N.V. Schoten/Antwerp · BelgiumTel. +32 3 6442500e-mail: [email protected]
asia pacific HeadquartersPepperl+Fuchs PTE Ltd. SingaporeCompany Registration No. 199003130ETel. +65 6779 9091e-mail: [email protected]
middle east/India HeadquartersPepperl+Fuchs M.E (FZE)Dubai · UAETel. +971 4 883 8378e-mail: [email protected]
1
2
3
4
5
6
7
8
SOLUTIONS FOR emeRSON CONTROL SYSTemS
OpeRaTIONaL exCeLLeNCe
pROCeSS aUTOmaTION
PROTECTING YOUR PROCESS
YOUR appLICaTION – OUR SOLUTION
INTRINSIC SaFeTY INTeRFaCINgIsolated barriers and zener barriers – DIN rail or termination board mounted – IEC 61508 SIL 2/3 approved
SIgNaL CONdITIONINgIsolated switch amplifiers, transmitter power supplies, repeaters, signal converters, and trip amplifiers – IEC 61508 SIL 2/3 approved
FIeLdbUS INFRaSTRUCTUReFOUNDATION fieldbus and PROFIBUS power supplies, diagnostics, and distribution
RemOTe I/O SYSTemSA range of safe and hazardous area (Division 2 and Zone 1, 2) mounting modular I/O
INdUSTRIaL mONITORS aNd HmI SOLUTIONSPanels PCs and remote monitors as well as operator panels and peripherals like barcode readers
pURge aNd pReSSURIZaTIONPurge and pressurization enclosure solutions for hazardous area Division 2 and Zone 1, 2 locations
CONNeCTION aNd CONTROLA wide range of EEx e and EEx d enclosures and control stations in stainless steel, GRP and cast metals
pOweR SUppLIeSHigh-integrity power supplies specifically designed for mission-critical applications – N+1 or redundant
wIReLeSS NeTwORkINgWireless gateways and adapters suitable for hazardous and safe area applications using HART technology
SURge pROTeCTIONSurge protection devices to safeguard the integrity of your entire process
pepperl+Fuchs is the undisputed market leader in intrinsically safe explosion protection components and offers a complete range of customized solutions for hazardous areas and critical applications.
Our solutions are employed in a wide variety of industries and applications including oil and gas, chemical, pharmaceutical, waste water management, power plants, distilleries, and many more. With the most comprehensive range of industrial automation products available today, Pepperl+Fuchs is uniquely qualified to provide professional service, expert support, and unmatched performance – whatever your application might be.
Local technical and commercial service ensures constant support from your initial design throughout the life cycle of your plant. With over 60 years of experience and a distinctive spirit of invention, Pepperl+Fuchs is your reliable partner in the process industry – providing innovative products that pave the way for increased efficiency and safety.
www.emerson.pepperl-fuchs.com
5 1
8
4
2
6
7
3
PROTECTING YOUR PROCESS
Subject to modifications • Copyright Pepperl+Fuchs • Printed in Germany • Part No. 231315 09/11 01
For over a half century, Pepperl+Fuchs has been continually providing new concepts for the world of process automation. Our company sets standards in quality and innovative technology. We develop, produce and distribute electronic interface modules, Human-Machine Interfaces and hazardous location protection equipment on a global scale, meeting the most demanding needs of industry. Resulting from our world-wide presence and our high flexibility in production and customer service, we are able to individually offer complete solutions – wherever and whenever you need us. We are the recognized experts in our technologies – Pepperl+Fuchs has earned a strong reputation by supplying the world’s largest process industry companies with the broadest line of proven components for a diverse range of applications.
www.pepperl-fuchs.com
pROCeSS aUTOmaTION – pROTeCTINg YOUR pROCeSS
Southern/eastern europe HeadquartersPepperl+Fuchs s.r.l. Sulbiate (MB) · ItalyTel. +39 039 62921e-mail: [email protected]
Northern europe HeadquartersPepperl+Fuchs GB Ltd. Oldham · EnglandTel. +44 161 6336431e-mail: [email protected]
Southern america HeadquartersPepperl+Fuchs Ltda.São Bernardo do Campo · SP · Brazil Tel. +55 11 4007 1448 e-mail: [email protected]
worldwide/german Headquarters Pepperl+Fuchs GmbH Mannheim · GermanyTel. +49 621 776 2222e-mail: [email protected]
North/Central america Headquarters Pepperl+Fuchs Inc. Twinsburg · Ohio · USATel. +1 330 486 0002e-mail: [email protected]
western europe & africa HeadquartersPepperl+Fuchs N.V. Schoten/Antwerp · BelgiumTel. +32 3 6442500e-mail: [email protected]
asia pacific HeadquartersPepperl+Fuchs PTE Ltd. SingaporeCompany Registration No. 199003130ETel. +65 6779 9091e-mail: [email protected]
middle east/India HeadquartersPepperl+Fuchs M.E (FZE)Dubai · UAETel. +971 4 883 8378e-mail: [email protected]
1
2
3
4
5
6
7
8