orlwp122-2-led · injection moulded polycarbonate body and diffuser, rated to ip65. supplied with...
TRANSCRIPT
-
Orlight’s single Non-Corrosive LED weather pack is an ideal amenity fixture for back of house areas, car parks, storage areas, warehousing, walkaways and general industrial use. Injection moulded Polycarbonate body and diffuser, rated to IP65. Supplied with stainless steel clips for added durability. Do not connect battery supply until 220/240V A.C. supply is permanently fed. Allow 24 hours charge before running lamp in emergency mode.
Light Source ORLWPLAMP-1500MM-2
Control Option Switched; DALI
Power Consumption 22W
Voltage 240V
Colour Temperature 4000K
Light Output ~ 2992lm
lm Per Watt ~ 136lm/W
CRI >80
Binning 4 Step McAdams Ellipse
Chip Life TM-21 Reported L70 > 36,000 hours / Calculated L70 55,000 hours
IP Rating IP65
Weight 2.5kg ; 3.5kg (Emergency Mode)
Finish Polycarbonate / Stainless Steel Clips
TOP VIEW
1570mm
1170mm200mm200mm
Suspended Holding PointsFixing Details Fixing DetailsSuspended Holding Points
90mm
90mm
Specifications - StandardDimensions
Product Coding: Example: ORLWP122-2-LED-DALI-EM
CODE
ORLWP122-2-LED
Standards
CONTROL OPTION
ND - (SWITCHED)
FROM SOURCE TO SITE® W - www.orlight.com T - 01923 851 890 E - [email protected]
Colourmetrics
4000K
EMERGENCY OPTION
EM - EMERGENCY
Specifications - Emergency Mode (Selected configuration will be Integral)
Battery Pack NI-CD 4.5Ah 4.8V 4 Cell
Power Consumption 3.5W
Light Output ~ 430lm
Battery Life 3 hours
R1 R2 R3 R4 R5 R6 R7 R884 93 96 82 84 89 85 66R9 R10 R11 R12 R13 R14 R1514 82 82 62 87 99 78
DALI EM - EMERGENCY
DescriptionORLWP122-2-LED - 5ft Single LED Weather Pack
WIDEBEAM ANGLE