our solutions for building construction · the requirements in building construction are also high....

Our solutions for building construction

Aiming high in building construction.

0302

You have set yourself lofty goals in building construction. Now it is time to master various challenges, to meet tight schedules – and to always keep an eye on costs. Solutions from Wacker Neuson offer you everything you need in building construction: Wacker Neuson—all it takes!

Your Wacker Neuson benefits:• Always on site: mobile.wackerneuson.com – Quickly

and easily find Wacker Neuson near you• Extensive product range for your individual needs• First-class used equipment in Wacker Neuson quality• Mobile service and quick availability of spare parts for

minimal downtime• Flexible financing models, entirely tailored to your

individual needs – for new and used equipment

0504

Emission-free if necessary: if the 803 dual power moves to the next location, the HPU is

simply attached to the rear.

The battery-powered vibratory rammers AS30e and AS50e: compact in the trench without exhaust emissions.

In sensitive areas, you can readily continue to work with the DT10e with low noise emissions.

Fully electric and efficient: significantly reduced maintenance costs thanks to electric motors.

zero emission: work more efficiently without noise and thick air.

Start conveniently: our electric devices are very easy to operate - all you need to do it just press a button.

Ready for use in no time: the powerful battery is quickly charged and changed in a few seconds. It fits both in our vibratory rammers, as well as in the vibratory plates – once purchased, twice used, lots saved.

One battery.

Two machines.

Practical tip

3 models

Operating weight: 101.4 – 147 kgRunning time: over 1 hour

You know the problem: strict exhaust gas and noise regulations often apply to construction projects in city centers. Even in interiors and other sensitive areas, you cannot get ahead with combustion engines. Wacker Neuson has the perfect solution for this – or even better: many solutions. For we have the world's largest fleet of emission-free equipment. Whether purely electric or with innovative dual power technology - with our zero emission products you can meet any tender. And these equipment are just as efficient as our conventional machines, since they offer the same performance.

Work emission-free - for the benefit of your clients, employees and the environment.

3 models

Operating weight: 41 – 70 kgRunning time: approx. 30 – 45 Min.

Battery-powered rammers

Our zero emission products.

Battery-powered vibratory plates

WL20e

Bucket capacity: 0.2 m3

Running time: at least 5 hours

803 dualpower

Operating weight: 1,052 – 1,112 kgTwo drive system options:

Diesel engine or electric motor

EZ17e

Operating weight: 1,724 – 1,950 kgRunning time: up to 7 hours

Electric wheel loaderMini-excavator dual power Electric mini-excavator

DT10e

Maximum payload: 1,000 kgRunning time: up to 8 hours

Electric track dumper

DW15e

Shipping weight: 1,765 kgRunning time: up to 8 hours

Electric wheel dumper

You can find out more about our emission-free solutions here: www.wackerneuson.com/zero-emission

HMS

0706

Powerful internal vibrators are an indispensable basis for the processing of concrete matter in building construction – because precise consolidation needs to take place here. The internal vibrators from Wacker Neuson provide you the best work results here: with motors specially developed for application in fresh concrete, the durable and sturdy equipment compacts extremely reliably and offers you the highest level of safety during any work step.

Full power for perfect concrete consolidation – with internal vibrators for any requirement.

06

Our internal vibrators.

Self-contained application guaranteed. In addition to its practical handling, the integrated converter impresses with its potted electronic components with absolute wear resistance. Simply connect to an outlet and get to work right away!

Wacker Neuson Bodyguard™ personal protection switch. The integrated Bodyguard™ switches the equipment off if necessary within three milliseconds – for more safety for the operator.

Converter: Extra safe!

“Our confidence in Wacker Neuson is, most of all, based on the product quality. Especially for internal vibrators, Wacker Neuson offers by far

the best products in the market. Not to forget the large branch network providing a country-wide service is ideal for us because it works quickly

and is solution-oriented as is the machine availability.”Rafał Biskup, Administrative Director of the Sawbud company, Poland

What our customers are saying:

The practical guide handle is made for easy consolidation of flat elements.

1. Flexible shaft: steel mesh and spiral steel protection provide for a high kink resistance2. Vibrator head: perfect consolidation performance with high wear resistance and long service life3. Drive motor: powerful combustion or electric motor (depending on your choice) with a quick disconnect coupling and a special

protective filter, which prevents the ingress of foreign bodies

1. Converter The internal vibrator is fitted with an integrated frequency converter. The converter part consists of a power cable, Bodyguard (TM) and converter housing. The easy-to-use interface allows for a quick connection with the vibrator head.

2. Vibrator heads The vibrator component consists of a protective hose and vibrator head. To ensure optimum consolidation performance, 4 different vibrator head diameters are available with the respective protective hose lengths up to 10 m.

Modular internal vibrators: the flexible HMS system

Practical kit series: iRFUflex.

Wear-free, reliable, sturdy: our internal vibrators convince in every way.

HMS

Modular concept for easy working comfort

IREN

Diameter of the vibrator head: 30 – 45 mm

without converter

IE


without converter

IRFU

Diameter of the vibrator head: 30 – 45

mmwith integrated

converter

IRSE-FU


with integrated converter

IRSEN


without converter

IEC



IRFUflex



Premium

AdvancedBasic

With Bodyguard™

With Bodyguard™

With HandleModular concept

Basic

Premium

2. 1. 3.

2. 1.

0908

Powerfully compact concrete to last – our external vibrators are nothing to sneeze at.

The perfect consolidation of concrete is essential for an excellent surface quality. It is a good thing that we provide you with our “Made in Germany” powerful equipment with our external vibrators, which master any challenge. They are handy, quick to attach and extremely reliable and durable thanks to the speed-stable asynchronous motors. Thanks to different voltage and speed versions as well as finely adjustable centrifugal forces, you always achieve precise consolidation results.

Our external vibrators.

7 models3,000 – 6,000 rpm

9 models3,000 – 9,000 rpm

4 models3,000 – 6,000 rpm

7 models1,500 – 9,000 rpm

2-series

5-series

4 models3,000 – 6,000 rpm

9 models1,500 – 9,000 rpm

3-series

6-series

4-series

7-series

Suitable for all standard formwork systems: you are always on the safe side with the varied selection of fastening clamps for quality exposed concrete surface external vibrators. You can find all fastening clamps at www.wackerneuson.com/clamps

The right fastening clamp for any application.

Practical tip

The practical helper: with the exposed concrete kit, you are perfectly equipped for the consolidation of high quality exposed concrete surfaces. The sturdy wooden box on a steel plate contains a frequency converter, external vibrators and fastening clamps.

Regardless of whether a wooden or steel frame formwork – the external vibrator works persistently and at full speed.

Easy assembly and firm hold: you will get an optimal result only with the right attachment.

The AR26 is available with an integrated converter.

The best expertise in concrete consolidation.

Our concrete specialists from Wacker Neuson concrete solutions advise you on the highly complex subject of concrete consolidation. In addition, they offer you support in the planning of technically and economically optimal solutions. You can find more information and receive support at: www.wackerneuson.com/concrete

Made to be seen quality exposed concrete surface: precisely adjustable centrifugal forces via adjustable eccentric weight discs.

Well sorted to the next construction site.

1110

Perfect application at any frequency – with high quality converters.

Frequency converters are indispensable auxiliary tools in building construction. They convert the power supply into three-phase current, which has the correct voltage and frequency for the operation of internal and external vibrators. The frequency converters from Wacker Neuson are available to you in different versions. Whether mechanical or electronic, mobile or stationary: the high quality processing and high performance will impress you – even in long-time application!

Our frequency converters.

The rebar tier DF16 – quickly and intelligently tie reinforcing steel.

Electronic frequency converters

KTU2

Spare parts – quickly available!

We back you up: with an international sales organization and service network that insists on speed, quality and absolute reliability. Thanks to our stock management, 90% of our spare parts are available directly from the Spare Parts Department – even for older machines!

Compact design with high-quality electronics: for maximum performance in continuous operation.

Sturdy, portable frequency converters deliver power where it's needed.

Evenly drilled, solid knots in no time – the rebar tier DF16 from Wacker Neuson is ideal for traditional work on reinforcements and the effortless fixing of synthetic material pipes. Now work with just one hand and in an anatomically correct and upright posture! Very easily attach practical holster to your waistband. Watch a live demonstration of the reinforcementrebar tier now: www.wackerneuson.com/DF16

8 models

Converter with cable drum

A real lightweight: only 8.9 kg and a convenient handle for practical transport.

FUH20 FUH35 FUH70 2 models FUE-M38

High-frequency converter Stationary converters

DF16

up to 1,000 knots per hour

Optimally smooth surfaces – the trowels make it possible.

Floating, finishing and polishing concrete are important work steps if a first-class level concrete floor is to be achieved. With our trowels, you can take care of these tasks professionally. Whether you choose a walk-behind or ride-on model: in each case, you get a hard and smooth concrete floor with a fine surface structure. Choose the right model for your concrete surface from our manifold product range!

Our trowels.

First-class smooth concrete surfaces without compromise: with Wacker Neuson trowels you will master this challenge accurately and comfortably.

1312

As good as new, maintained, checked by a professional — our used machine offer.

Top condition, top price — benefit from a variety of professionally prepared machines and equipment in proven Wacker Neuson quality. Or trade in your used construction machines for payment. You can find more information at: www.used.wackerneuson.com

610 mm operating width

1,830 mm operating width



CT24

CRT36

915 mm operating width

CT36 CT48

CRT48

The emission-free alternative. Pleasant working in enclosed spaces without disturbing exhaust fumes and noise: the electrically operated trowels are operator-friendly in application and impress with a high degree of productivity and precision.

Spread, strike off, consolidate. When processing concrete floors, the wet screed P35A from Wacker Neuson takes care of three work steps in one. And it does this with simple operability: its lift handles make it easy to move on the concrete. This ensures first class results on all types of concrete.

Wet screed.

Unbeatable in use directly on border areas and on small surfaces.

Smooth without emissions.

Practical tip

Excavating, loading, transporting – solutions for any challenge

The requirements in building construction are also high. Machines and equipment must prove their versatile strengths with maximum maneuverability, high speed and simple operability every day. Just like our excavators, wheel loaders and telehandlers: they offer you maximum performances in any situation! Choose just the right model for your needs from our finely tiered product range.

1514

Our wheeled and tracked excavators.

Our wheel loaders. Our telehandlers.

Wheeled and tracked excavators

Wheel loaders Telehandlers

17 modelswith a shipping weight from 932 – 15,701 kg

14 modelsfor bucket capacities from 0.2 – 1.55 m³

11 modelsfor stacking heights from 4.1 – 8.7 m

Light towers.

Light as required - and completely automatically:the light tower LTE has a timer and a photocell. Thus, the connection time can be freely programmed, e.g. when it gets dark.

“To me as a project coordinator, efficiency is the most important thing. We have always been well advised with Wacker Neuson products. The investment in quality pays off quickly and this shows in the long service

lives of the products. Since we have equipped our machines with EquipCare technology, we are even more efficient.”

Dipl.-Ing. Tilman Arndt, project manager, Switzerland

What our customers are saying:

Financing as you wish.

We support your company's continued growth with financial solutions for all Wacker Neuson machines and equipment. To meet your requirements, we offer you tailor-made payment models, simple order processing and a variable performance offer.You can find more information at: www.wackerneusonfinance.com

Perfect for tight spaces: telescopic travel gear.

High level of maneuverability in a small space: our zero tail excavator without overhang.

The ET90 impresses with concentrated power that remains perfectly under control thanks to the load-sensing system.

Practical tip

17

Thanks to the hydraulically activated tool change, attachments can be replaced in the shortest time.

16

Reliable load carrier due to optimal weight distribution – and this with the best view of the transported goods.

Compact dimensions, high payload: the telehandlers impress with excellent stacking height and low overall height.

Work safer than ever. The innovative operator assistance system Vertical Lift System VLS switches on partially automatically, for example in the event of a risk of overload, and intelligently intervenes in the telescoping movements. In the process, it lowers the telescopic arm or retracts it without interrupting the sequence of operations. As a result, you work safely, comfortably and exceptionally efficiently.www.wackerneuson.com/vls

Telehandlers: so that you can progress and go higher at the same time!

Efficient!

Pure work force: our wheel loader WL95 with 2.8 t maximum payload and powerful load-sensing hydraulics. EquipCare. Give your machines a

voice.Have you ever had the feeling that your machine wants to tell you something? EquipCare by Wacker Neuson serves you as a translation software that tells you more about your machine - and much more.

Your benefits:• Increase availability: machine locations are displayed• Use resources more efficiently: easily define runtimes and locations• Drastically reduce repair times on site: digitally read out exact sources of error• Optimal utilization of machine park• Reduction of downtime and service life• Simplified scaling your unit fleet

For more information, contact our distributor or visit our web page: www.wackerneuson.com/equipcare

I HAVE IT GOING ALREADY.

SO, WHEN'S IT STARTING?

MY ROUTINE - TIME FOR ANOTHER INSPECTION.

Efficiently manage virtually any compaction task.

Those who build high need a solid foundation. With our powerful compaction equipment, you can reliably and economically manage this work step: our vibratory rammers, vibratory plates and rollers help you with a number of innovations to accurately and safely compact large areas as well as hard-to-reach spots.

Granular (non-cohesive) soils Mixed (well graded) soils Fine-grained soils

COMPACTION EQUIPMENTOPERATING WEIGHT (kg)

SUITABILITYLAYER

HEIGHT (cm)SUITABILITY

LAYER HEIGHT (cm)

SUITABILITYLAYER

HEIGHT (cm)

Vibratory rammer (light) 30 < 15 < 15 < 10

Vibratory rammer (medium) 30 – 60 20– 40 15– 30 10– 30

Vibratory rammer (heavy) 60– 90 30– 40 20– 40 20– 30

Vibratory plates (light) < 100 < 20 < 15 – –

Vibratory plates (medium) 100– 300 20– 30 15– 25 – –

Vibratory plates (heavy) > 650 40– 70 30– 50 – –

Vibratory rollers (light) < 600 20– 30 15– 25 – –

Roller (RC70) max 7,580 20– 50 20– 40 – –

SO

IL

Well-suited Conditionally suitable – Not suitable

Our compaction solutions.

Rammers

13 models 32 – 83 kg

Single-direction vibratory plates

12 models Performance from 10 – 20 kN

Reversible vibratory plates

15 models Performance from 15 – 110 kN

Heavy-weight remote controlled vibratory plates

3 modelsPerformance from 80 – 130 kN

Compaction equipment for any type of soil:

1918

Highest level of safety with infrared remote control.

The remote control is available for

DPU80r, DPU110r, DPU130r, RTSC3

• No hand-arm vibrations, dust and exhaust emissions• Reliable proximity (nearness) recognition sensor: the machine

stops automatically with a minimum safety distance between the operator and machine of under two meters

• Far-reaching control: transmission field of up to 20 meters at an angle of 45° guarantees a high level of working comfort

Our vibratory plates create an optimal foundation, e.g. for foot paths and parking lots.

Front vibratory drum, rear tires: for all classic compaction work

Combination rollers Single drum soil compactors

Front vibratory or oscillation drums: for larger compaction work on uneven ground conditions and on slopes

2. Vibration drum in the front, oscillation drum in the rear: for compaction work in vibration-sensitive surroundings

1. Front and rear vibratory drums: for all classic compaction work

Tandem rollers

Operating mode 1: static in the front, oscillation in the rear

Operating mode 2:vibration in the front, static in the rear

Type of compaction 1: vibration for high compaction depth

Type of compaction 2: oscillation for optimal surface compaction

Ideal visibility of drum edges ensure best compaction results.

Tandem rollersCoupling set, remote controlled Single drum soil compactors

16 models max. operating weight

from 731 – 5,640 kg

1 model Performance from 3 x 110 kN

5 models max. operating weight from 5,530 – 7,580 kg

Your everyday work day is full of challenges. We have the rightsolutions and help you to be ahead of the competition.We offer you everything you need for this purpose: Wacker Neuson—all it takes!

03/2019 EN

www.wackerneuson.com

Products

Pumps

Lighting

Concrete technology Compaction Demolition technology

TelehandlersWheel loaders

Generators

Heaters

Excavators

Used equipment

Dumpers

Services Spare parts

Financial solutions Uncomplicated, transparent and individual financing options for you.

Repair & maintenance Excellent and fast maintenance. Repairs with original spare parts.

AcademyWe expand your know-how: practice-oriented and within an ideal learning environment.

EquipCareEverything about the machines at a glance, via app or PC – EquipCare.

RentalProtect your liquidity and rent well-main-tained construction equipment accord-ing to requirement.

Concrete specialists Our specialists advise you in all project stages.

eStoreBuy original spare parts online conveniently – for all Wacker Neuson product groups.

Every minute counts: within the shortest period of time, we deliver over 150,000 genuine Wacker Neuson spare parts to your construction site.

*WN.EMEA.10110.V04.EN-US*WN.EMEA.10110.V04.EN-US

our solutions for building construction · the requirements in building construction are also high....

Documents