outline engineering properties of rock formations 1- rock material and rock mass concept 2- rock...
TRANSCRIPT
- Slide 1
- OUTLINE Engineering Properties of Rock Formations 1- Rock Material and Rock Mass Concept 2- Rock Material Properties 3- Rock Mass Properties 4- Investigation Methods of their Engineering Properties
- Slide 2
- INTACT ROCK & ROCK MASS
- Slide 3
- ROCK DISCONTINUITIES Definition A discontinuity in geotechnical engineering is a plane or surface that marks a change in physical or chemical characteristics in a soil or rock mass. A discontinuity can be, for example, a bedding, schistosity, foliation, joint, cleavage, fracture, fissure, crack or fault plane. Discontinuities may occur multiple times with broadly the same mechanical characteristics in a discontinuity set, or may be a single discontinuity. A discontinuity makes a soil or rock mass anisotropic
- Slide 4
- ROCK DISCONTINUITIES Properties
- Slide 5
- ROCK DISCONTINUITIES Properties ROUGHNESS in large scale wavy or straight ROUGHNESS in small scale rough or smooth INFILL material mineral infill or clay infill or no infill PERSISTENCE 1-3 meters or >10 meters APERTURE closed or no contact SPACING 1-5 cm or >1 meters WEATHERING conditions fresh or completely weathered
- Slide 6
- SHEAR STREGTH OF ROCK DISCONTINUITIES Engineering Properties of Rock Formations = c + tan
- Slide 7
- INVESTIGATIONS Engineering Properties of Rock Formations DRILLING (Subsurface Investigations)
- Slide 8
- INVESTIGATIONS Engineering Properties of Rock Formations DRILLING RODS
- Slide 9
- INVESTIGATIONS Engineering Properties of Rock Formations BOREHOLE LOGS AND SAMPLE BOXES
- Slide 10
- Engineering Properties of Rock Formations RQD (Rock Quality Designation) AND CORE RECOVERY CONCEPTS ROCK MASS CLASSIFICATIONS
- Slide 11
- Engineering Properties of Rock Formations RQD (Rock Quality Designation) AND CORE RECOVERY CONCEPTS ROCK MASS CLASSIFICATIONS
- Slide 12
- Engineering Properties of Rock Formations RMR ROCK MASS RATING AND ROCK MASS ENGINEERING PROPERTIES
- Slide 13
- ROCK MASS CLASSIFICATIONS Engineering Properties of Rock Formations RMR ROCK MASS RATING AND ROCK MASS ENGINEERING PROPERTIES
- Slide 14
- ROCK MASS CLASSIFICATIONS Engineering Properties of Rock Formations Q-SYSTEM AND ROCK MASS ENGINEERING PROPERTIES Where RQD is Rock Quality Designation, J n is joint set number, J r is joint roughness number, J a is joint alteration number, J w is joint water reduction factor, and SRF is stress reduction factor. It should be noted that RQD/J n is a measure of block size, J r /J a is a measure of joint frictional strength, and J w /SRF is a measure of joint stress
- Slide 15
- ROCK MASS CLASSIFICATIONS Engineering Properties of Rock Formations GSI-SYSTEM AND ROCK MASS ENGINEERING PROPERTIES = c + tan
- Slide 16
- ROCK MASS CLASSIFICATIONS Engineering Properties of Rock Formations GSI ?
- Slide 17
- ROCK MASS CLASSIFICATIONS Engineering Properties of Rock Formations GSI ?
- Slide 18
- ROCK MASS CLASSIFICATIONS Engineering Properties of Rock Formations GSI ?
- Slide 19
- ROCK MASS CLASSIFICATIONS Engineering Properties of Rock Formations GSI ?
- Slide 20
- ROCK MASS CLASSIFICATIONS Engineering Properties of Rock Formations GSI ?
- Slide 21
- ROCK MASS CLASSIFICATIONS Engineering Properties of Rock Formations GSI ?
- Slide 22
- ROCK MASS CLASSIFICATIONS Engineering Properties of Rock Formations GSI ?
- Slide 23
- ROCK MASS CLASSIFICATIONS Engineering Properties of Rock Formations GSI ?
- Slide 24
- ROCK MASS CLASSIFICATIONS Engineering Properties of Rock Formations RQD ?
- Slide 25
- EARTH MAKING SUBSTANCES ROCKS ROCK SLOPE STABILITY/ INSLOPE&OUTSLOPE
- Slide 26
- EARTH MAKING SUBSTANCES ROCKS ROCK SLOPE STABILITY
- Slide 27
- EARTH MAKING SUBSTANCES SOILS GRAIN SIZE The smaller the grain size or The lower the compaction degree results in; * more pores, * more water in pores, * more settlement, * less bearing capacity, Cohesion governs for small sizes of particles whereas Friction angle governs for large particles = c + tan
- Slide 28
- EARTH MAKING SUBSTANCES SOILS SOIL BEHAVIOUR/SETTLEMENT
- Slide 29
- EARTH MAKING SUBSTANCES SOILS SOIL BEHAVIOUR/BEARING CAPACITY
- Slide 30
- EARTH MAKING SUBSTANCES SOILS SOIL BEHAVIOUR/LIQUEFACTION LOOSE SOIL DENSIFY DURING LIQUEFACTION = c + tan
- Slide 31
- EARTH MAKING SUBSTANCES SOILS SOIL BEHAVIOUR/LIQUEFACTION SOIL BEHAVES LIKE LIQUID AND HAVE LITTLE OR NO SHEAR STRENGTH AT ALL
- Slide 32
- EARTH MAKING SUBSTANCES SOILS SOIL BEHAVIOUR/LIQUEFACTION