p3000 universal clamp-on - rack warehouse...b177 s103 s101 s101 7. 3 use the allen tool for more...

1

PART# DESCRIPTION ENDCAPS SIDE SUPPORTS ITEM

SS-S101 3/8” SINGLE SLIDER (LENGTH 1”) 4 4

SS-S103 3/8” DOUBLE SLIDER 3” 4 4

SS-B165 5/16” X 1” COUNTERSUNK BOLT 4 4

SS-B177 3/8” X 3/4” COUNTERSUNK BOLT 8 8

SS-B117 5/16” X 1” BUTTON HEAD ALLEN BOLT ----- 8

N006 3/8” NYLON NUT 16 16

N015 5/16” KNOB SMALL 4 4

SS-W006 5/16” X 1/2” WASHER ----- 8

SS-W008 5/16” X 3/4” WASHER 4 4

SS-W013 3/8” X 3/4” WASHER 16 16

P3000 CLAMP 8 8

ADJUSTABLE” UPRIGHT 4 4

ADAPTOR PLATE 4 4

P013 ANGLED BRACE 4 4

A286-65/72/84 65”/72”/84” A286 CROSS BAR 2 2

G112 2” X 12” GASKET 4 4

Z286 A286 ENDCAPS 4 -----

A03 A286 BORDER SUPPORT ----- 4

A20 ADJUSTABLE LADDER GUIDE 4 4

Allen KeyWrenchINSTRUCTION MANUALINSTRUCTION MANUAL

P3000 UNIVERSAL Clamp-On

Required Tools

Packaged by Date

IHI

NOT DRAWN TO SCALE

P3001 65” ENDCAPS [ ]P3002 72” ENDCAPS [ ]P3003 84” ENDCAPS [ ]

P3011 65” SIDES [ ]P3012 72” SIDES [ ]P3013 84” SIDES [ ]

BLACK [ ] WHITE [ ] SILVER [ ]

2

W013

S103

N006

S103

3.

4.

4. 5.

2.1.

-Repeat each step for all 4 mounts and 2 cross bars.

-Hand tighten only unless specified. Adjustment is needed for proper fitment.

Insert for later steps

Tightly Secure Bolts

6.

S103

G112

B177

S103

S101S101

7.

3

Use the allen tool for more leverage. Repeat for remaining corners.

W008

N005

-After adjusting the cross bar and uprights to align correctly and centered tightly secure all hardware.

Tighten both clamps till there is no movement. Repeat for all 4 corners

9.

8.

B117

W006

Z286

OR

11.

10.

OR

A20

4

Accessories | extruded Aluminum systems

Part # Description Color MSRP

A57 Adjustable Ladder Stopper 5-7” Black or White 35.00

AdjustAble lAdder stopper

Ì Adjustable 2pcs. ladder stopper prevents ladders from sliding forward.

Ì The bottom half of the stopper is galvanized and powder coated.

Ì The top is galvanized and rubber dipped for durability.

Ì The unit is bolted onto the bottom channels of the cross bar.

Part # Description Height Color MSRP

A64 Push to Secure 6-8” Black or White 69.00

push-2-secure

Ì Secure your ladder with the Vantech Push 2 Secure.

Ì System is bolted underneath cross bar. Holds ladder 6”-8” in height.

Ì Installs onto rear cross bar

Ì Works together with Ladder Stopper

Part # Height Bar Type Color MSRP

A20 5” A285, A286 Black Rubber 39.00 (pair)

A93 5” A270, A287, A613 Black Rubber 39.00 (pair)

AdjustAble Guides with eye hooks

Ì The adjustable guide slides inside the channels of the cross bar and locks into places with turn-knob

Ì Eyehook located on top for easy tie-down and bungee.

Ì 5” in height to secure item side to side.

rubber coAted side support

Ì Includes stainless steel mounting hardware.

Ì Built in Eyehook on each support

Part # Bar Type

Color MSRP

A08 A270 Black Rubber 15.00 pair




Part # Weight Capacity MSRP

A67 100 lb. 119.00(each)

eZ-Velcro strAp

Ì Strap a ladder with the EZ velcro straps.

Ì Holds up to a maximum of 75 lbs in combination with the ladder stopper or guide.

Ì Loops into cross bar.

Note: Currently does not fit 286 cross bars

Part # Height Bar Type Color MSRP

A69 10” All 75 lb. 18.00 (each)

4 pc. holder with strAps

Ì Holds Kayak, surfboards and canoes

Ì Adjustable rubber padding can conform to side or bottom of equipment

Part # Size Bar Type MSRP

A24 1”A285 A286

10.00 (pair)

A59 1.25”A285 A286

14.00 (pair)

A94 1”A270 A287 A613

10.00 (pair)

eyehook

Ì Eyehooks includes sliders to fasten into channel.

Ì Tighten eyehook to secure into place.

Part # Height Bar Type MSRP

A25 1.5” A285, A286

20.00 (pair)

A26 1.5” A270, A287, A613

20.00(pair)

AdjustAble eyehook Ì Eyehooks includes sliders to secure

into channel.

Ì Tighten knob to secure into place.

Part # Length Install Weight Capacity MSRP

A62 10’ Onto Eyehook 150 lbs 35.00 (each)

rAtchet tie-down

Ì The Vantech Ratchet tie-down attaches to eyehooks on the mounting uprights with 1/2” bolts.

Ì Sold as individuals

Part #Strap

LengthBar Type Weight Capacity MSRP

A61 7’ Channels 150 lbs 29.00 (each)

rAtchet tie-down

Ì Attach the Vantech Ratchet tie-down to the channels of the crossbar.

Ì Sold as individuals

Ì Adjustable along channels

Part # Bar Type MSRP

A47 Locking Key knob with key (sold in pairs) 39.00 (pair)

lockinG key knob

Ì Prevent theft of racks or equipment

Ì Fits all 3/8” threading on upright mounts

5

Vantech 6” conduit carrier. Ì Spring assist rear door for a water tight seal.

Ì Padlock tab for rear hatch door.

Ì Direct bolt-on system.

Ì Secures into channels of aluminum crossbars with sliders.

Ì Includes: Front cap, rear door, 2 “U” brackets and hardware.

Ì 6” PVC pipe not included.

Part # Description Bar Type MSRP

A34 6” Conduit Carrier (bolt on) All 89.00

Plastic Bar Guard

Ì 3/4" & 2" Plastic Bar Guards

Ì Adhesive on one side

Ì Extend life of crossbars.

Ì Prevents scratches on Cross Bars

Ì Can be cut to specific sizes

Ì Any excess can be cut to length

Ì Can be used on other surfaces

Part # Description Length MSRP

BG042 3/4” wide bar guards with self adhesive tape 42” 6.00






BG251 2” wide bar guards with self adhesive tape 51” 9.00





BG5483/4” wide non-slip rubber bar guards

(press in channels)48" 14.00










BG7481” wide rubber Cushion bar guards










Surfaces without Channel

Surfaces with Channel

Surfaces with Channel

ruBBer Bar Guard

Ì Rubber Bar Guards

Ì Fits into channels of extruded aluminum bars

Ì Easy press-on design

Ì Can be cut to specific sizes

Ì Any excess can be cut to length

Ì minimize rattling sound

Ì Prevents scratches on Cross Bars

ruBBer Bar Guard cushion

Ì Rubber Bar Guards (Cushioned)

Ì Fits into channels of extruded aluminum cross bars.

Ì Function and install similar to normal rubber bar guard

Ì Additional air pocked for extra cushion

Ì Great for kayaks, boards, and other materials or equipment.

Part # Size Color MSRP

A108 3.75" Black 5.00

360°adjustaBle conVex Mirror (Adhesive bAck)

Ì Sticks onto side view mirror.

Ì Adhesive backing

Ì Convex Mirror to show more

p3000 universal clamp-on - rack warehouse...b177 s103 s101 s101 7. 3 use the allen tool for more...

Documents