Slide 132 Outdoors
Monitor and control the MDS system both indoors and outdoors
User and Service Personnel Interface
*
A. The CPU main frequency is 800MHz or above.
B. The memory is 256M or above.
C. The free hard disk is 4G or above.
D. The serial port is available. The USB port is available.
E. The operating system is Windows 2000/Xp.
F. The monitor is larger than 15 inch, and 17 inch is
recommended.
Page *
Page *
User Interface
Multiple Control
*
B.Function menu
. Initiating: If the operating environment of the hardware changes(for example: the quantity of indoor or outdoor changes, the type of the indoor changes),customs can click this function, the software will monitor the dates of indoor and outdoor.
. Error History: To record the date and the time of the indoor and outdoor’s faults in the system. *
.User Management: To manage the name and the passwords of the users. *
.Parameter Setting: To set the parameter of the system, It is better to perform by the service persons. *
.Prompts for the units running. *
Page *
Select “ ” or “ ”, can turn on or close the units
*
B.Function menu
. Initiating: If the operating environment of the hardware changes(for example: the quantity of indoor or outdoor changes, the type of the indoor changes),customs can click this function, the software will monitor the dates of indoor and outdoor.
. Error History: To record the date and the time of the indoor and outdoor’s faults in the system. *
.User Management: To manage the name and the passwords of the users. *
.Parameter Setting: To set the parameter of the system, It is better to perform by the service persons. *
.Prompts for the units running. *
Page *
Fan Speed
Sleep Mode
B.Function menu
. Initiating: If the operating environment of the hardware changes(for example: the quantity of indoor or outdoor changes, the type of the indoor changes),customs can click this function, the software will monitor the dates of indoor and outdoor.
. Error History: To record the date and the time of the indoor and outdoor’s faults in the system. *
.User Management: To manage the name and the passwords of the users. *
.Parameter Setting: To set the parameter of the system, It is better to perform by the service persons. *
.Prompts for the units running. *
Page *
Features
Page *
Features
Page *
Features
Page *
Page *
Tsh_out: OD superheat
Digital compressor output %
HS: High Pressure (bar)
LS: Low Pressure (bar)
Heating electronic expansion valve
Subcool electronic expansion valve
TH6: Entering water temp
TH7: Heating water temp
TH12: Suction temp
Sensor is unavailable
Available Data - OD
*
1) “No.1” is outdoor unit address number, after it is model name.
2) This chart is system diagramred line means heating state,green line means cooling or dehumidify stateblack line means stop state.
3) the position of sensor in the diagram is hint position.
Page *
Indoor Data:
Tr: Return Air Temperature
To: Coil Outlet Temperature
Tm: Coil Middle Temperature
Ti: Coil Inlet Temperature
2.4.4. indoor unit system diagram parameter:
1) Click “up”or“down”indoor unit address number will move up or down Click “Back Page”or“Next Page” the page will turn up and down.
2)The number after“No.”is address number of indoor unit, when you want to test unit you can input the address number as per your requirementit will display the requested parameterwhen you point to move indoor unit address number the unit you remanded will come back to default setting
Page *
Click “Up” or “Down”, ID address number will move up or down
Click “Back Page” or “Next
Page”, the page will turn up or down
Indoor Control and Sensor Reading
*
2.4.4. indoor unit system diagram parameter:
1) Click “up”or“down”indoor unit address number will move up or down Click “Back Page”or“Next Page” the page will turn up and down.
2)The number after“No.”is address number of indoor unit, when you want to test unit you can input the address number as per your requirementit will display the requested parameterwhen you point to move indoor unit address number the unit you remanded will come back to default setting
Page *
Choose optional parameters to control single unit
Optional mode: Stop, Cooling, Heating, Dry, Fan
Fan Speed: Low, Medium, High & Auto
Assistant function: Aux heater, Swing & Lock
Indoor Control and Sensor Reading
*
6) )Click“Ctrl”to set indoor unit Choose optional parameters to control single unit.
Optional mode: StopCoolingHeatingDryFan. *
Fan speedLowMiddleHigh and Auto.
Temp range163061-86
Assistant functionAux heater sleep, swing and lock
Page *
Hard Drive : 4G or higher for hard disk space
OS : Windows XP (Windows Vista not compatible)
Resolution : 1024 x 768
Serial port & USB port available
*
A. The CPU main frequency is 800MHz or above.
B. The memory is 256M or above.
C. The free hard disk is 4G or above.
D. The serial port is available. The USB port is available.
E. The operating system is Windows 2000/Xp.
F. The monitor is larger than 15 inch, and 17 inch is
recommended.
Page *
On/Off
Fan Speed Setting
Timer On/Off by group ( 1 set On timer & 1 set Off timer)
Sleep Mode
MC301
Page *
The outdoor unit will operate under cooling or heating mode according to the first mode setting of the indoor.
All indoor must be turn off or switched to fan mode before switching from cooling to heating or vice versa. This can be performed by group control using MC303.
Operating Mode Setting
System Operating Mode
COOL
COOL
FAN
DRY
HEAT
HEAT
FAN