pallet box light
TRANSCRIPT
A stylish box made from two used shipping pallets which can serve as a lighting arrangement. This can be used indoors or outdoors.
The light and shadow effect created due to the slits between the pallets is poetic!
Pallet Box Light
Instructables by Biji-biji Initiative
Materials Tools
• Pallet – One set• Plywood• Screws• Marker / Chalk• Tape measure• Safety gear
• Jigsaw• Driller ( screw drill bit)
Materials and Tools Checklist:
Pallet Box LightInstructables by Biji-biji Initiative
• Mark a line in the middle of each pallet dividing it into two equal parts.
• Two pallets of the same size are required for this project.
Pallet Box LightSTEP 1 Instructables by Biji-biji
Initiative
• Use a jigsaw to cut on the centre line.• You will get two parts as shown.
• Place these parts upright as shown.
• Repeat this procedure for the other pallet and so you will have four parts.
Pallet Box LightInstructables by Biji-biji Initiative STEP 2
• Fix the parts together by using screws and power drill.
• Repeat the procedure to combine other parts till the four sides are done.
• Use screws at the top and bottom on each side.
Pallet Box LightSTEP 3 Instructables by Biji-biji
Initiative
This is how the box will look.
• Using a tape measure , check the size of the square and cut two pieces of plywood in the same size.
• Using screws fix one plywood piece to the box.• This will be the base. • So invert the box.
Measure these sides
Pallet Box LightSTEP 4 Instructables by Biji-biji
Initiative
• Using just one screw , fix the other plywood piece on one corner.
• This will be the lid which can be twisted to open and close.
The pallet box light is now ready. Ole..
• The electric light can be fixed inside.
screw
Pallet Box LightSTEP 5 Instructables by Biji-biji
Initiative