panzer putty

8
MXpression Tips & Tricks I Working with Panzer Putty

Upload: vuhanh

Post on 31-Dec-2016

335 views

Category:

Documents


11 download

TRANSCRIPT

Page 1: Panzer Putty

MXpressionTips & Tricks I

Working with Panzer Putty

Page 2: Panzer Putty

Removing Putty from the ModelTake a large piece of Panzer Putty

Remove Panzer Put-ty from model with a stippling motion.

Be careful not to break off tiny parts.

When leaving the Panzer Putty on for too long it will stick very tight!

1

Page 3: Panzer Putty

Cutting Panzer Putty

2

Page 4: Panzer Putty

Making Thin LinesTake a small piece of Panzer Putty.

Slowly pull it to a thin strip and lay it on your model.

Repeat this until you are content with the result.

Let the strings rest for some minutes so they adhere better to the surface.

3

Page 5: Panzer Putty

Soft Edge - Hard Edge Airbrushing on a round Panzer Putty object will create soft edge camouflage spots on your model.

Airbrushing on a thin and flat Panzer Putty object will create hard edge camouflage spots on your model.

4

Page 6: Panzer Putty

Creating Curves - Part I

Take a piece of Pan-zer Putty.

Slowly pull it to a long string and lay it in curves on your model.

Stop when you like the result.

5

Page 7: Panzer Putty

Creating Curves - Part II

Some parts of the Panzer Putty are not sitting on the surface yet.

After a few minutes of waiting, the Panzer Putty is settling to the surface.

6

Page 8: Panzer Putty

Creating Curves - Part III

In areas where the Panzer Putty does not settle af-ter a few minutes, you can easily push it down with a clean and small tool. Be careful that the Panzer Putty does not stick to the tool.

7