Parrot AR.Drone 2.0 Motor ReplacementHow to diagnose and replace a faulty motor on your Parrot AR.Drone 2.0.

Written By: David Hoyt

Parrot AR.Drone 2.0 Motor Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 7

INTRODUCTION

Use this guide to diagnose and replace a faulty motor on your Parrot AR.Drone 2.0.

AR.Drone 2.0 spare parts and mounting tools are available from several Parrot retailers.

[video: http://youtu.be/DNMOlWJCbm4]

TOOLS:iFixit Opening Tools (1)

Phillips #00 Screwdriver (1)

PARTS:Parrot AR Drone 2.0 Motor and

Controller (1)

Parrot AR.Drone 2.0 Motor Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 7

Step 1 — Propeller and Gear

Remove the foam body.

Step 2

Disconnect the battery by pulling the two red wires apart.

Remove the battery by releasing the battery retaining straps.

Parrot AR.Drone 2.0 Motor Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 7

Step 3

Remove the small retaining clipusing a plastic opening tool.

Be careful as these clips can fly offand can be difficult to find.

Step 4

The propeller, gear, and rod can be removed by simply lifting them off the motor.

Parrot AR.Drone 2.0 Motor Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 7

Step 5 — Motor

Disconnect the connector at the bottom of the motor assembly.

Step 6

Remove the three 5mm screws onthe top of the motor assembly with aPH00 bit.

Parrot AR.Drone 2.0 Motor Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 7

To reassemble your device, follow these instructions in reverse order.

This document was last generated on 2017-12-03 01:53:44 PM.

Step 7

Remove the three 5mm screws onthe bottom again using a PH00 bit.

The three screws from the top aredifferent from the three screws onthe bottom.

Step 8

Carefully wiggle out the motor assembly out of the arm.

Parrot AR.Drone 2.0 Motor Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 7

Parrot AR.Drone 2.0 Motor Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 7