patterns manufacturing

WE THANKWE THANK FOR GIVING US THIS OPPORTUNITY TO FOR GIVING US THIS OPPORTUNITY TO

PRESENT OURSELVESPRESENT OURSELVES

JM Group of Companies.JM Group of Companies.

Company Profile Company Profile

COMPANY NAME : JM INDUSTRIES & J M ENTERPRISES.COMPANY NAME : JM INDUSTRIES & J M ENTERPRISES.

(Subsidiary of JM Group of companies)(Subsidiary of JM Group of companies)

ESTABLISHED ESTABLISHED : YEAR 1999.: YEAR 1999.

OFFICE ADDRESS OFFICE ADDRESS : 17/4, MANGAL NAGAR, WAKAD ROAD,: 17/4, MANGAL NAGAR, WAKAD ROAD, THERGAON,PUNE 411033. INDIA. THERGAON,PUNE 411033. INDIA.

PHONES : 91-020- 27273483, 9822311904.PHONES : 91-020- 27273483, 9822311904.

FACTORY ADDRESS FACTORY ADDRESS : GATNO.85,JYOTIBANAGAR,TALWADE, : GATNO.85,JYOTIBANAGAR,TALWADE, BEHIND,NATIONAL WEIGHBRIDGE,BEHIND,NATIONAL WEIGHBRIDGE, PUNE- 412114 PUNE- 412114

CONTACT PERSONS:CONTACT PERSONS: SACHIN ANKUSH PAWARSACHIN ANKUSH PAWAR,, Managing DirectorManaging Director..

Mobile:-9822311904Mobile:-9822311904

RAHUL ANKUSH PAWARRAHUL ANKUSH PAWAR Assist Manager. Assist Manager.

Mobile:-9881001904Mobile:-9881001904

ROHIT ANKUSH PAWARROHIT ANKUSH PAWAR Technical Director.Technical Director.

MobileMobile:-:-98221019049822101904

E - MAILE - MAIL : : [email protected][email protected]

PRODUCT MANUFACTUREDPRODUCT MANUFACTURED

CHECKING FIXTURE.CHECKING FIXTURE.

ASSY FIXTURE.ASSY FIXTURE.

THERMACOL PATTERN & WOODEN PATTERN.THERMACOL PATTERN & WOODEN PATTERN.

EPOXY SOFT TOOLING.EPOXY SOFT TOOLING.

CMM INSPECTION.CMM INSPECTION.

SHEET METAL PRESSING WORKSHEET METAL PRESSING WORK

PRODUCT RANGE :PRODUCT RANGE :

PROTOTYPE MODEL.PROTOTYPE MODEL.

F.R.P MOULD.F.R.P MOULD.

EPOXY SOFT TOOLING.EPOXY SOFT TOOLING.

INFRASTRUCTUREINFRASTRUCTUREFACTORY AREAFACTORY AREA : 4000 SQUARE FT.: 4000 SQUARE FT.

TOTAL INVESTMENTTOTAL INVESTMENT : IRS 40 LAKH.: IRS 40 LAKH.

THE TEAM THE TEAM MANAGEMENT MANAGEMENT 66

STAFF STAFF 6 6

DESIGN ENGINEERS (BE MECHANICAL)DESIGN ENGINEERS (BE MECHANICAL) 4 4

TOOL MAKERS TOOL MAKERS 8 8

CAM ENGINEERS CAM ENGINEERS 22

PRODUCTION ENGINEERS PRODUCTION ENGINEERS 2 2

TOOL ROOMTOOL ROOM

FACILITY LISTFACILITY LIST

TOOL ROOM AREATOOL ROOM AREA : 3000 Sft.: 3000 Sft.

DESIGN DEPARTMENTDESIGN DEPARTMENT

HARDWARE :HARDWARE : 4 computers with networking. operating system used is windows 4 computers with networking. operating system used is windows XP, XP,

equipped with latest state of the art CAD software and high end hardware with equipped with latest state of the art CAD software and high end hardware with experienced and trained engineers.experienced and trained engineers.

These software's enable us to work on a product from the concept stage till the final These software's enable us to work on a product from the concept stage till the final manufacturing of checking fixtures.manufacturing of checking fixtures.

It ensures use of right materials, perfect design that is the best possible way to It ensures use of right materials, perfect design that is the best possible way to produce the fixture and end product at an economic cost. It helps to simulate all produce the fixture and end product at an economic cost. It helps to simulate all assemblies & part fitment to cut down lead time.assemblies & part fitment to cut down lead time.

CMM INSPECTION MACHINE 1 NoCMM INSPECTION MACHINE 1 No

VMC MACHINE NO 1 (1000X500X500) 1 NoVMC MACHINE NO 1 (1000X500X500) 1 No

VMC MACHINE NO 2 (1500X750X650) 1 NoVMC MACHINE NO 2 (1500X750X650) 1 No

VMC MACHINE NO 3 ( 1500x750x850) 1 NOVMC MACHINE NO 3 ( 1500x750x850) 1 NO

SURFACE GRINDER PRAGA MAKE SURFACE GRINDER PRAGA MAKE 1 No1 No LATHE KIRLOSKAR E - 1550LATHE KIRLOSKAR E - 1550 1 No.1 No. BENCH DRILLBENCH DRILL 2 No. 2 No. SINGLE POINT CUTTER GRINDERSINGLE POINT CUTTER GRINDER 1 No. 1 No. BENCH GRINDERBENCH GRINDER 2 No 2 No SURFACE PLATE 1000 x 1000 mm SURFACE PLATE 1000 x 1000 mm 1 No. 1 No. BAND SAW M/C 1 NoBAND SAW M/C 1 No..

WELDING M/C WELDING M/C 1No. 1No.

MAGNETIC DRILLMAGNETIC DRILL 1 No 1 No

STRENGTHS:STRENGTHS:

CAPABILITY TO DESIGN AND MANUFACTURE INTRICATE AND CAPABILITY TO DESIGN AND MANUFACTURE INTRICATE AND LARGE FIXTURE.LARGE FIXTURE.

ADDING VALUE TO CUSTOMER REQUIREMENTADDING VALUE TO CUSTOMER REQUIREMENT

SHORT LEAD TIMESHORT LEAD TIME

BEING FIRST TIME CORRECTBEING FIRST TIME CORRECT

CMM INSPECTION DEPTCMM INSPECTION DEPT

FACILITY LISTFACILITY LIST

AREA REQDAREA REQD : 1500 Sqft.: 1500 Sqft.

HARDWARE :HARDWARE : 2 computers with control panel for movement of X ,Y & 2 computers with control panel for movement of X ,Y & Z axis. operating system used is windows XP, equipped with DELCAM & Z axis. operating system used is windows XP, equipped with DELCAM & VDMIS software and high end hardware with experienced and trained VDMIS software and high end hardware with experienced and trained engineers.engineers.

These software's enable us to check component ,checking fixtures, These software's enable us to check component ,checking fixtures, generate graphs & reports.generate graphs & reports.

STAFF FOR CMM INSPECTION STAFF FOR CMM INSPECTION SERVICESSERVICES

CMM MACHINECMM MACHINE

KEY PROJECTSKEY PROJECTS 4 Wheeler checking fixture :4 Wheeler checking fixture :

REAR FLOOR PANEL.REAR FLOOR PANEL. DASH PANEL.DASH PANEL.

CROSS MEMBER FRONT CROSS MEMBER FRONT LONG MEMBERLONG MEMBER

M PILLAR LHM PILLAR LH

DASH PANELDASH PANEL

VW 250 REAR BUMPERVW 250 REAR BUMPER

SK 250 FRONT BUMPERSK 250 FRONT BUMPER

SK 250 REAR BUMPERSK 250 REAR BUMPER

SK 250 FRONT BUMPER SK 250 FRONT BUMPER RADITOR GRILLRADITOR GRILL

VW 251 FRONT BUMPER VW 251 FRONT BUMPER RADITOR GRILLRADITOR GRILL

VW 251 VENTILATION VW 251 VENTILATION LOUVER GRILL.LOUVER GRILL.

FRONT BUMPER BRACKET CONNECING PIECEFRONT BUMPER BRACKET CONNECING PIECE

VW 250 FRONT & REAR BUMPER CMM ASSY FIXTUREVW 250 FRONT & REAR BUMPER CMM ASSY FIXTURE

VW 250 FRONT & REAR BUMPER CMM ASSY FIXTURE.VW 250 FRONT & REAR BUMPER CMM ASSY FIXTURE.

2 WHEELER PARTS: SEAT. 2 WHEELER PARTS: SEAT.

COWLCOWL

SHEET METAL ASSY CHECKING SHEET METAL ASSY CHECKING FIXTUREFIXTURE

PROJECT X3 :-PROJECT X3 :-A PILLAR LH/RH.A PILLAR LH/RH.

PROJECT X3 :- B PILLAR UPPER PROJECT X3 :- B PILLAR UPPER LH/RH LH/RH

PROJECT X3 :- B PILLAR LOWER PROJECT X3 :- B PILLAR LOWER LH/RHLH/RH

THEARMACOL PATTERN FOR THEARMACOL PATTERN FOR PRESS TOOLING.PRESS TOOLING.

THEARMACOL PATTERN.THEARMACOL PATTERN.

Press Machine of 150 TonPress Machine of 150 Ton..

Press ShopPress Shop

Press Machine 50 & 30 TonPress Machine 50 & 30 Ton

MAJOR CUSTOMERSMAJOR CUSTOMERS

TATA MOTORS LTD.TATA MOTORS LTD. GODREJ & BOYCE MFG CO LTD.GODREJ & BOYCE MFG CO LTD. COMAU INDIA PVT LTD.COMAU INDIA PVT LTD. TATA AUTOPLASTIC SYSTEM Pvt. Ltd.TATA AUTOPLASTIC SYSTEM Pvt. Ltd. MAHINDRA & MAHINDRA LTD.MAHINDRA & MAHINDRA LTD. MUTUAL INDUSTRIES.MUTUAL INDUSTRIES. CTM INDIA PVT LTD.CTM INDIA PVT LTD. TATA VISTION LTD.TATA VISTION LTD. M-TECH INDUSTRIES PVT LTD.M-TECH INDUSTRIES PVT LTD. RELIABLE AUTO PVT LTD.RELIABLE AUTO PVT LTD. BHARAT INDUSTRIES.BHARAT INDUSTRIES. BRIGHT AUTO PLASTIC LTD.BRIGHT AUTO PLASTIC LTD. MOTHERSON INDIA.MOTHERSON INDIA. INTERNATIONAL AUTOMOTIVE COMPONENT LTD.INTERNATIONAL AUTOMOTIVE COMPONENT LTD. LEAR CORPORATION.LEAR CORPORATION. CONEX AVIO AUTO PVT LTD.CONEX AVIO AUTO PVT LTD. CEARS SYSTEM PVT, LTD.CEARS SYSTEM PVT, LTD. ARVIN MERITOR.ARVIN MERITOR. PRABHA DYETEK.PRABHA DYETEK. WALCHAN NAGAR INDUSTRIES.WALCHAN NAGAR INDUSTRIES.

Communication Facilities Communication Facilities Telephone No’s : Telephone No’s : OfficeOffice Tel --91-20-27273483, Tel --91-20-27273483,

Mob no- 9822311904,Mob no- 9822311904, Mob no- 9881001904.Mob no- 9881001904.

Email:Email: [email protected]@gmail.com [email protected][email protected]

BANKERS :BANKERS : PRERNA CO-OP BANK PRERNA CO-OP BANK

LAXMAN NAGAR DANGE CHOWK ,THERGAON LAXMAN NAGAR DANGE CHOWK ,THERGAON

PUNE -33 PUNE -33

PH NO- 020+27270999PH NO- 020+27270999

Sales Tax Details:Sales Tax Details:

VAT NOS: 411033/232376/17.03.2006 VAT NOS: 411033/232376/17.03.2006

CST NOS: 411033/232376/17.03.2006 dt 1/4/96CST NOS: 411033/232376/17.03.2006 dt 1/4/96

SSI NOS :SSI NOS :

TOTAL SALESTOTAL SALESTURN OVERTURN OVER PERIOD 2000-2001PERIOD 2000-2001 - IRS 20 LAKH.- IRS 20 LAKH.

TURN OVERTURN OVER PERIOD 2001-2002PERIOD 2001-2002 - IRS 30 LAKH.- IRS 30 LAKH.

TURN OVERTURN OVER PERIOD 2002-2003PERIOD 2002-2003 - IRS 35 LAKH.- IRS 35 LAKH.

TURN OVER PERIOD 2003-2004 TURN OVER PERIOD 2003-2004 - IRS 50 LAKH. - IRS 50 LAKH.

TURN OVER PERIOD 2004-2005TURN OVER PERIOD 2004-2005 - IRS 80 LAKH. - IRS 80 LAKH.

TURN OVER PERIOD 2005-2006TURN OVER PERIOD 2005-2006 - IRS 95 LAKH. - IRS 95 LAKH.

TURN OVER PERIOD 2006-2007 - IRS 1.15 LAKH.TURN OVER PERIOD 2006-2007 - IRS 1.15 LAKH.




Thank You…. Thank You…. Have A Pleasant Day. .Have A Pleasant Day. .

patterns manufacturing

Design

epoxy soft

high end hardware

operating

thearmacol

windows xp

softwares

sachinapawar06yahoo

checking fixtures