INVICTA

PEN

STO

CK

SO

LUTI

ON

S

PENSTOCK SOLUTIONS

2 | WASTEWATER TREATMENT

The AVK Penstock Range

The AVK Sealschur Penstock range are designed to compliment our existing Water and Waste Water offering.

High Quality Manufacture

Manufactured in Europe, the AVK Sealschur penstock range is designed using Finite Stress Structual Analysis (FSA) to ensure optimum rigidity and allowing for modelling that allows any undesirable deformation to be designed out pre-production.

Computer controlled laser cutting and the latest robotic welding machines ensure minimal waste material and correct welding processes - minimising deformation across the penstock.Stainless steel grade 304 or 316 on Duplex gives maximum corrosion resistance with low mass for ease of installation.

Quality & Testing

To ensure that the sealing of the penstock is within our manufacturing tolerance and within the British Standard BS7775 requirements, the penstocks can be hydraulically batch tested for leak tightness and rigidity.

Finite Element Analysis (FEA)

Products are subject to FEA as part of their design. The pictures show typical information display during testing in a range of pressure conditions.

INVICTA PENSTOCK RANGEInvicta is a well established, service driven company offering complete valve, penstock and actuator solutions.

Invicta Valves was formed in 1982 and has grown over the last 30 years from independent valve and actuator stockist / distributor to a nationally recognised complete valve and actuator solution provider, with an outstanding reputation for valve solutions, particularly “the outside the box” bespoke packages for the most challenging applications.

Member of the group

WASTEWATER TREATMENT | 3

3-SIdEd PENSTOCKThe versatile 3-sided sealing Sealschur Penstock is suitable for channel mounting applications.

Product Characteristics

• 3-sided open top frame design suitable for channel mounting.

• Square or rectangular opening• Size range: 150mm to 2000mm, larger

sizes available. • Fabricated stainless steel frame and slide,

resilient rubber sealing with either • non-rising, rising spindle also available.• Flush invert available• Bi-directional to the height of the slide,

uni-directional sealing also available• Designed in general accordance with DIN

19569-4• Leakage Allowance – lower than allowable

in DIN 19569-4 (class 5)

A choice of mounting designs are available ie concreting into pre cast rebates for new structures or sidewall fixed for existing channels, wall mounting at the end of channels

Variety of actuation options are available ie manual, electric, extension spindles, pedestals

4-SIdEd PENSTOCKThe versatile 4-sided sealing Sealschur Penstock is suitable for wall fixing applications.

Product Characteristics

• 4- sided closed frame design• Suitable for wall mounting with a square or

rectangular opening• Size range: 150mm to 2000mm, larger

sizes available• Fabricated stainless steel frame and slide,

resilient rubber sealing with either • non-rising spindle or rising spindle • Flush invert available• Bi-directional up to and inc 1200 x 1200• Uni-directional and bi-directional available

on larger sizes• Designed according to DIN 19569-4• Leakage Allowance – lower than allowable

in DIN 19569-4 (class 5)

Stock:Sizes 150x 150 up to and inc 600mm square opening available ex-stock, having 304 stainless steel construction, non-rising spindle

Variety of actuation options are available ie manual, electric,extension spindles, pedestals

AVK CHANNEL PENSTOCK WITH NON-RISING STEMFor embedding in concrete, AISI 304, EPDM

772/7172001

AVK channel penstocks are square or rectangular with resilient sealing on three sides of the slide. They are as standard uni-directional up to and including 1000 X 1000 and bi-directional in larger sizes. The penstocks are with non-rising stem and closed frame, and are designed for open channel installations embedded in concrete. AVK channel penstocks are also available with rising stem, and for wall mounting as well as for face mounting in existing channel. All penstocks in the comprehensive product range feature a low leakage rate and a reliable operation.

Product Description:AVK channel penstock with non-rising stem for water and wastewater treatment

Standards:• Designed according to DIN 19569-4

Features:• Fulfills requirements of Directive 95/9/CE (ATEX), Group II Category 2 (Zone 1)• Lower leakage rate than max. allowable in DIN 19569-4 (class 5): 1,20 L/min. per seating meter• Self-supporting closed frame design• Self-cleaning guides and slide bearings of HMWPE (high molecular weight polyethylene) reduce the friction

during operation resulting in easy operation and extended seal durability• Self-adjusting “lip-design” sealing of EPDM mounted on the slide offers easy access to maintenance• Frame and slide of stainless steel AISI 304 and stem of stainless steel AISI 303• All fasteners of stainless steel A2• Delivered with handwheel as standard up to and including 1400X1400, in larger sizes with bevelgear

Accessories:Handwheel on inclined wall stand, handwheel on straight floor stand, gear operator on straight floor stand, electric actuator on straight floor stand, hydraulic actuator, pneumatic actuator, yoke mounted handwheel, yoke mounted gear and crank, position indicators, limit and proximity switches, stem extensions, stem guides and wall thimbles

1/2COPYRIGHT©AVK GROUP 2014 Version no. 29 - 9-4-2014 8:40

AVK WALL PENSTOCK WITH NON-RISING STEMClosed frame for wall mounting, AISI 304, EPDM

772/61001

AVK wall penstocks are square or rectangular with resilient sealing on all four sides of the slide. They are bi-directional up to and including 1200 X 1200 and in larger sizes available as bi- and uni-directional.  The penstocks are with non-rising stem and closed frame, and are designed for wall mounting. AVK wall penstocks are also available with rising stem and for embedding in concrete. All penstocks in the comprehensive product range feature a low leakage rate and a reliable operation.

Product Description:AVK wall penstock with non-rising stem for water and wastewater treatment

Standards:• Designed according to DIN 19569-4

Features:• Fulfills requirements of Directive 95/9/CE (ATEX), Group II Category 2 (Zone 1)• Lower leakage rate than max. allowable in DIN 19569-4 (class 5): 1,20 L/min. per seating meter• Frame design allows easy mounting at medium height or floor level, and for elevated or flush bottom

installation• Self-cleaning guides of HMWPE (high molecular weight polyethylene) reduce the friction during operation

resulting in easy operation and extended seal durability• Self-adjusting “lip-design” sealing of EPDM mounted on the frame• Frame and slide of stainless steel AISI 304 and stem of stainless steel AISI 303• All fasteners of stainless steel A2• Seal and guides bolting is completely separated from the frame anchoring• Delivered with handwheel up to and including 1000X1000, in larger sizes with bevelgear

Accessories:Handwheel on inclined wall stand, handwheel on straight floor stand, gear operator on straight floor stand, electric actuator on straight floor stand, hydraulic actuator, pneumatic actuator, yoke mounted handwheel, yoke mounted gear and crank, stem nut, stem extensions, stem guides and wall thimbles

1/2COPYRIGHT©AVK GROUP 2014 Version no. 28 - 9-4-2014 8:33

4 | WASTEWATER TREATMENT

WEIR PENSTOCK

STOP LOG

The Sealschur Weir Penstock is a versatile 3 or 4-sided sealing suitable for wall fixing applications

Product Characteristics

• 3 or 4-sided frame design• Suitable for wall mounting with a square or

rectangular opening• Size range : 150mm to 2000mm, larger

sizes available• Fabricated stainless steel frame and slide,

resilient rubber sealing with Non-rising or rising spindle available

• Bi –directional sealing• Designed according to DIN 19569-4• Leakage allowance – lower than allowable

in DIN 19569-4 (class 5)

Variety of actuation options are available i.e. manual, electric, extension spindles, pedestals

The aluminium and stainless steel stop logs are designed for open channel installation.

Product Characteristics

Aluminium stop logs are designed for temporary isolation and flow control. Stop logs are ideal for maintenance and repair work on flood control and reservoirs. The stop logs are made from extruded aluminium and are easy to handle due to their: • Light weight construction• Bidirectional sealing• Sizes to suit application• Lifting devices available i.e. Lifting poles or

lifting beams

Stainless steel stop logs are designed for waste water treatment plants, irrigation, hydraulic works and hydro electric power plants

They are made from grade 304, 316 or duplex steel. The frames can be: • Channel or wall mounted • Bidirectional sealing• Sizes 150x150 and upto 2mx2m, larger

sizes available. • Lifting devices available i.e. Lifting poles or

lifting beams dependent on size.

Reserves the right to change specifications without noticeORBINOX SAPol. Ind. s/n-20270 ANOETA (Spain) Tel.: +34 943 698030 - Fax: +34 943 653066 e-mail:orbinox@orbinox.comORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A.

www.orbinox.com

SL

OBX 10/13 Revision 2SL-1

The Orbinox model SL Stop Log is designed for openchannel installations in waste treatment plants, irrigation,hydraulic works and hydro-electric power plants.The slide is formed by several logs that fit on top of eachother in the frame. By adding or removing logs, the SLmodel allows the user to control the flow in a channel.The sealing system is incorporated on both laterals andbottom area of each log, resulting in a substantiallywatertight seal. From sizes 150mm x 150mm to 2000mmx 2000mm, the SL model has a unique “lip” type sealdesign. The frame of the SL model is typically embedded inconcrete, but can also be designed to be wall mounted orface mounted in an existing channel.Orbinox can also design and manufacture the SL modelStop Log in larger dimensions and for higher serviceconditions while maintaining a low leakage rate. For moreinformation, please contact an Orbinox representative.

The standard SL model is manufactured in stainless steelwhich has a higher corrosion resistance in manyapplications which results in a higher life cycle with little orno maintenance. Other materials of construction areavailable upon request, such as AISI 904L, Duplexstainless, etc.

GENERAL DESCRIPTION

CONSTRUCTION DESIGN

MODEL

GENERAL DESCRIPTION

ORBINOX reserves the right to change specifications without notice.OBX 11/12 Revision 1

SA-1ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A.

www.orbinox.com

The Orbinox model SA Aluminum Stop Log is designedfor open channel installations for temporary isolation andflow control. Stop Logs are ideal for maintenance andrepair works or flood control and diversion. The logs aremade of extruded aluminum and are very easy to handledue to their light weight.

The logs are stacked on top of each other in the frameguides. The water level is controlled by adding orremoving logs. The sealing system is bidirectional(suitable for flows in either direction) and allows toachieve very low leakage rates.

The frame can be made of aluminum or stainless steeland it can be designed to be embedded in concrete, wallmount or face mounted in a existing channel.

SAMODEL ALUMINUM STOP LOGS

WASTEWATER TREATMENT | 5

FLAP VALVEThe flap valves are designed for discharge lines such as river levies, sewer lines and drainage conduit and are available in either round, square or rectangular openings.

Product Characteristics

• The flap stays closed preventing water back-flow, and it opens automatically when the unseating water head is higher than the seating water head.

• Sizes available: 150mm - 3000mm and above

• For maximum corrosion resistance the flap gates are manufactured from stainless steel or duplex. Where required chemical or exporting anchor bolts can be supplied.

Options

Flap valves are available flange mounted

PROdUCT RANGE TAbLEWALL PENSTOCK CHANNEL GATE WEIR GATE STOP GATE STOP LOG ALUMINIUM STOP LOG FLAP GATES

√As std: dN200-1000; 10mwc

More than 1100; 6mwcHigher water heads optional

√(Optional)

√As std: dN200-1400;

5mwcbigger sizes and lighter

water heads optional

√ √ √ √ √

√downward

opening

√Add

remove or logs

√ Add remove or logs

Water pressure

Extruded Aluminium(Option of stainless steel frame)

Fabricated Stainless Steel

Integrated(Manual, bevel Gearbox, Electric Motor, Sqr. Nut,

Pneumatic Cylinder, Hydraulic Cylinder)

External(Manual Lifting Pole, External Crane or Lifting

device connected to crane)

Fabricated Stainless Steel

4 SIdE SEALING

3 SIdE SEALING

WATER LEVEL REGULATION

ACTUATION SySTEM

CONSTRUCTION

SEAL

ING

6 | WASTEWATER TREATMENT

SITE INSTALLATION SERVICEInvicta Valves can offer a one stop site installation service to install the Invicta range of penstocks, stop logs or flap valves.

Our skilled site engineers are experienced, qualified and hold the relevant site safety passports and are confined space trained.

We provide all necessary lifting equipment for the installation. We can also offer electrical / small civil installations when required.

Invicta Valves are specialists in carrying out site surveys to establish the condition of penstocks, stop logs and flap valves. We are able to refurbish or replace existing equipment.

WASTEWATER TREATMENT | 7

ACCESSORIES

SERIES 701/70AVK Combination AirRelief ValveDN80, PN16Cast Aluminium

SERIES 701/73AVK AutomaticAir Relief ValveDN80, PN16Cast Aluminium

SERIES 702AVK Knife Gate ValveDN50-1000 Drilled to PN16UT1 PN40Grey Cast Iron

SERIES 21/00AVK Resilient Seat Gate Valve DN50-400, PN10/16/25Grey Cast Iron BS EN 1074-1&2, BS 5163-1&2

SERIES 37/40AVK Metal SeatGate ValveDN50-300, PN10/16Ductile Iron BS 5163:1986 type B

SERIES 21/01AVK Resilient Seat Gate Valve with ISO mountingDN50-400, PN10/16Grey Cast Iron BS EN 1074-1&2, BS 5163-1&2

SERIES 55/30AVK Resilient Seated Large Diameter Gate ValveDN450-600, PN10/16Ductile Iron BS 5163 type B

SERIES 54AVK Metal Faced Large Diameter Gate ValveDN350-600, PN10/16/25Ductile IronBS 5163

SERIES 641AVK Recoil Swing Check ValveDN100-1600, PN16Ductile Iron

SERIES 41AVK Resilient Seat/Metal SeatSwing Check ValveDN50-600,PN16Ductile Iron BS 5153:1974

All the Sealschur penstocks in the range can be supplied with operating and equipment and accessories to meet all the operating requirements.

HEAd STOCKS

SPINdLES WALL bRACKETS

ACTUATORS

ASSOCIATEd PROdUCTS

SERIES 772/20SAFOXAVK SealschurPenstock,DN150-3000Stainless steelBS 7775

Printed matter

IVPEN DEC2014 Copyright@Invicta Group A/S 2014

Invicta - Fire defence SolutionsDunkirk Lane, Hyde,Cheshire, SK14 4PL, EnglandTel: +44 (0)1246 479144Fax: +44 (0)1613 685719

Invicta Valves Ltd - Head OfficeUnits 9-12 Boxmend, Parkwood Industrial Estate, Maidstone, Kent ME15 9YGTel: +44 (0) 1622 754613 Email: sales@invictavalves.co.uk

www.invictavalves.co.uk

Member of the group