performance profile sheet
TRANSCRIPT
Performance Profile Sheet
Module 15201 has no Performance Profile Sheet;performance testing is not required for this module.
Copyright © 2021 NCCER. Permission is granted to reproduce this page provided that copies are forlocal use only and that each copy contains this notice.
Performance Profile SheetCraft: Millwright Level Two
Module: 15302
Module Title: Precision Measuring Tools
TRAINEE NAME: __________________________________________________
TRAINING PROGRAM SPONSOR: ____________________________________
INSTRUCTOR: ____________________________________________________
Rating Levels:(1) Passed: performed task
(2) Failed: did not perform task
Be sure to list the date the testing for each task was completed.
Recognition:When testing for the NCCER Training Program, record performance testing results and submit completion dates through NCCER's online Testing System.
OBJECTIVE TASK RATING DATESTART TIME
END TIME
1 Use a telescoping gauge to transfer a measurement.
1 Use one or more levels to establish a level condition.
1 Use calipers to make and transfer a measurement.
1 Use a micrometer to measure shim stock or similar materials.
1 Use a standard to test micrometer accuracy.
1 Use a dial indicator for measurement.
1 Use a pyrometer to take temperature measurements.
Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided.
Signatures:I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator.
Candidate/Trainee: ____________________________________ Date: _______________________
Module 15302 – Precision Measuring Tools | 2
Performance Evaluator: _________________________________ Date: _______________________
Copyright © 2021 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice.
Performance Profile SheetCraft: Millwright Level Two
Module: 15205
Module Title: Millwright Power Tools
TRAINEE NAME: __________________________________________________
TRAINING PROGRAM SPONSOR: ____________________________________
INSTRUCTOR: ____________________________________________________
Rating Levels:(1) Passed: performed task
(2) Failed: did not perform task
Be sure to list the date the testing for each task was completed.
Recognition:When testing for the NCCER Training Program, record performance testing results and submit completion dates through NCCER's online Testing System.
OBJECTIVE TASK RATING DATESTART TIME
END TIME
1 Demonstrate the safe use and care of four instructor-selected tools from the following list:
• Standard or magnetic drill press
• Hydraulic or pneumatic press
• Horizontal or vertical bandsaw
• Pipe threader
• Bearing heater
• Nibbler
• Conveyor belt cutter
Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided.
Signatures:I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator.
Candidate/Trainee: ____________________________________ Date: _______________________
Performance Evaluator: _________________________________ Date: _______________________
Module 15205 – Millwright Power Tools | 2
Copyright © 2021 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice.
Performance Profile SheetCraft: Millwright Level Two
Module: 15207
Module Title: Setting Baseplates and Soleplates
TRAINEE NAME: __________________________________________________
TRAINING PROGRAM SPONSOR: ____________________________________
INSTRUCTOR: ____________________________________________________
Rating Levels:(1) Passed: performed task
(2) Failed: did not perform task
Be sure to list the date the testing for each task was completed.
Recognition:When testing for the NCCER Training Program, record performance testing results and submit completion dates through NCCER's online Testing System.
OBJECTIVE TASK RATING DATESTART TIME
END TIME
1 Establish baseplate and soleplate locations and elevations.
1, 2 Set a baseplate or soleplate as part of a team.
1, 2 Verify the accuracy of a baseplate or soleplate installation.
2 Set shim packs.
Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided.
Signatures:I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator.
Candidate/Trainee: ____________________________________ Date: _______________________
Performance Evaluator: _________________________________ Date: _______________________
Copyright © 2021 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice.
Performance Profile Sheet
Craft: Basic RiggerModule: 38102Module Title: Rigging Practices
TRAINEE NAME: __________________________________________________TRAINING PROGRAM SPONSOR: ____________________________________INSTRUCTOR: ____________________________________________________
Rating Levels:(1) Passed: performed task(2) Failed: did not perform taskBe sure to list the date the testing for each task was completed.
Recognition:When testing for the NCCER Training Program, record performance testing results and submitcompletion dates through NCCER's online Testing System.
OBJECTIVE TASK RATING DATE STARTTIME END TIME
1, 2 Inspect various types of riggingcomponents and report on the conditionand suitability for a task.
2 Configure a sling to produce a single-wrapbasket hitch.
2 Configure a sling to produce a double-wrapbasket hitch.
2 Configure a sling to produce a single-wrapchoker hitch.
2 Configure a sling to produce a double-wrapchoker hitch.
2 Select the correct tagline for a specifiedapplication.
2 Tie specific instructor-selected knots.
3 Select, inspect, and demonstrate the safeuse of the following rigging equipment:
Module 38102 - Rigging Practices | 2
OBJECTIVE TASK RATING DATE STARTTIME END TIME
• Block and tackle
• Chain hoist
• Ratchet-lever hoist
• One or more types of jacks
Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date thisform in the space provided.
Signatures:I, the undersigned, acknowledge the successful completion of the above performance task(s) under thesupervision of an NCCER certified Performance Evaluator.
Candidate/Trainee: ____________________________________ Date: _______________________
Performance Evaluator: _________________________________ Date: _______________________
Copyright © 2018 NCCER. Permission is granted to reproduce this page provided that copies are forlocal use only and that each copy contains this notice.
Performance Profile SheetCraft: Welding Level One
Module: 29102
Module Title: Oxyfuel Cutting
TRAINEE NAME: __________________________________________________
TRAINING PROGRAM SPONSOR: ____________________________________
INSTRUCTOR: ____________________________________________________
Rating Levels:(1) Passed: performed task
(2) Failed: did not perform task
Be sure to list the date the testing for each task was completed.
Recognition:When testing for the NCCER Training Program, record performance testing results and submit completion dates through NCCER's online Testing System.
OBJECTIVE TASK RATING DATESTART TIME
END TIME
3 Set up oxyfuel equipment.
3 Light and adjust an oxyfuel torch.
3 Shut down oxyfuel cutting equipment.
3 Disassemble oxyfuel cutting equipment.
3 Change empty gas cylinders.
4 Cut shapes from various thicknesses of steel, emphasizing:
• Straight line cutting
• Square shape cutting
• Piercing
• Beveling
• Cutting slots
4 Perform washing.
4 Perform gouging.
4 Use a track burner to cut straight lines and bevels.
Module 29102 – Oxyfuel Cutting | 2
Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided.
Signatures:I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator.
Candidate/Trainee: ____________________________________ Date: _______________________
Performance Evaluator: _________________________________ Date: _______________________
Copyright © 2015 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice.
Performance Profile SheetCraft: Millwright Level Two
Module: 15107
Module Title: Gaskets and Packing
TRAINEE NAME: __________________________________________________
TRAINING PROGRAM SPONSOR: ____________________________________
INSTRUCTOR: ____________________________________________________
Rating Levels:(1) Passed: performed task
(2) Failed: did not perform task
Be sure to list the date the testing for each task was completed.
Recognition:When testing for the NCCER Training Program, record performance testing results and submit completion dates through NCCER's online Testing System.
OBJECTIVE TASK RATING DATESTART TIME
END TIME
1 Lay out and cut a full-face flange gasket.
1 Install an instructor-specified gasket.
2 Remove and replace the packing in a valve or pump stuffing box.
Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided.
Signatures:I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator.
Candidate/Trainee: ____________________________________ Date: _______________________
Performance Evaluator: _________________________________ Date: _______________________
Copyright © 2021 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice.
Performance Profile Sheet
Craft: Millwright Level TwoModule: 15304Module Title: O-Rings and Non-Mechanical Seals
TRAINEE NAME: __________________________________________________TRAINING PROGRAM SPONSOR: ____________________________________INSTRUCTOR: ____________________________________________________
Rating Levels:(1) Passed: performed task(2) Failed: did not perform taskBe sure to list the date the testing for each task was completed.
Recognition:When testing for the NCCER Training Program, record performance testing results and submitcompletion dates through NCCER's online Testing System.
OBJECTIVE TASK RATING DATE STARTTIME END TIME
1, 2 Visually identify various types of O-ringsand non-mechanical seals.
1, 2 Remove and replace an O-ring and a non-mechanical seal.
Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date thisform in the space provided.
Signatures:I, the undersigned, acknowledge the successful completion of the above performance task(s) under thesupervision of an NCCER certified Performance Evaluator.
Candidate/Trainee: ____________________________________ Date: _______________________
Performance Evaluator: _________________________________ Date: _______________________
Copyright © 2021 NCCER. Permission is granted to reproduce this page provided that copies are forlocal use only and that each copy contains this notice.
Performance Profile SheetCraft: Millwright Level Two
Module: 15209
Module Title: Introduction to Bearings
TRAINEE NAME: __________________________________________________
TRAINING PROGRAM SPONSOR: ____________________________________
INSTRUCTOR: ____________________________________________________
Rating Levels:(1) Passed: performed task
(2) Failed: did not perform task
Be sure to list the date the testing for each task was completed.
Recognition:When testing for the NCCER Training Program, record performance testing results and submit completion dates through NCCER's online Testing System.
OBJECTIVE TASK RATING DATESTART TIME
END TIME
1 Identify instructor-provided bearings.
1 Identify bearing components, describing their purposes.
Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided.
Signatures:I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator.
Candidate/Trainee: ____________________________________ Date: _______________________
Performance Evaluator: _________________________________ Date: _______________________
Copyright © 2021 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice.
Performance Profile SheetCraft: Millwright Level Two
Module: 15306
Module Title: Removing and Installing Bearings
TRAINEE NAME: __________________________________________________
TRAINING PROGRAM SPONSOR: ____________________________________
INSTRUCTOR: ____________________________________________________
Rating Levels:(1) Passed: performed task
(2) Failed: did not perform task
Be sure to list the date the testing for each task was completed.
Recognition:When testing for the NCCER Training Program, record performance testing results and submit completion dates through NCCER's online Testing System.
OBJECTIVE TASK RATING DATESTART TIME
END TIME
1 Remove a bearing using a puller or press.
1 Install a bearing using cold or hot fitting.
1 Install pillow-block bearings.
Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided.
Signatures:I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator.
Candidate/Trainee: ____________________________________ Date: _______________________
Performance Evaluator: _________________________________ Date: _______________________
Copyright © 2021 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice.
Performance Profile SheetCraft: Welding Level One
Module: 29103
Module Title: Plasma Arc Cutting
TRAINEE NAME: __________________________________________________
TRAINING PROGRAM SPONSOR: ____________________________________
INSTRUCTOR: ____________________________________________________
Rating Levels:(1) Passed: performed task
(2) Failed: did not perform task
Be sure to list the date the testing for each task was completed.
Recognition:When testing for the NCCER Training Program, record performance testing results and submit completion dates through NCCER's online Testing System.
OBJECTIVE TASK RATING DATESTART TIME
END TIME
3 Set up plasma arc cutting equipment.
3 Set the amperage and gas pressures or flow rates for the type and thickness of metal to be cut using plasma arc equipment.
3 Square-cut metal using plasma arc equipment.
3 Bevel-cut metal using plasma arc equipment.
3 Pierce and cut slots in metal using plasma arc equipment.
3 Dismantle and store the equipment.
Please make sure that both the Candidate/Trainee and Performance Evaluator sign and date this form in the space provided.
Signatures:I, the undersigned, acknowledge the successful completion of the above performance task(s) under the supervision of an NCCER certified Performance Evaluator.
Candidate/Trainee: ____________________________________ Date: _______________________
Performance Evaluator: _________________________________ Date: _______________________
Module 29103 – Plasma Arc Cutting | 2
Copyright © 2015 NCCER. Permission is granted to reproduce this page provided that copies are for local use only and that each copy contains this notice.