personalia milan van bree
TRANSCRIPT
16 maart 2015 [Curriculum vitae M. van Bree MSc. ]
Curriculum Vitae | Milan van Bree MSc. 1 of 3
Name M. van Bree
Born/place 16-03 1973, Deurne Phone +31 (0)643012204
Family Married, 3 children (2004♀-‘05♂-‘07♂)
Education
2008-2011 TU Delft, (part time) graduated MSc Applied Material Science, scripts:
Machining of titanium alloys
Atomic layer deposition of thin film.
Influences of surface topology for brazing
Friction welding of AlO2 towards Cu-OF
Defended Final Thesis: Thin film technology at beryllium windows
2005-2006 Fontys Mechanical engineering (part time) BEng graduated
Defended Thesis: Developed 8" vacuum chuck tend for grinding Si wafers to 25µm
2004-2005 HAN Management (part time) BBA graduated, Black belt: (Projects @Philips)
Defended Thesis: FMEA combined six sigma build template
2001-2002 Education sport instructor (B-Licensee gymnastics, graduated)
1996-1997 Intermediate vocational education (MBO- mechanical engineering)
1991-1996 Intermediate vocational education (MBO- mechanical engineering)
1992-1994 Education sport instructor (C-Licensee gymnastics, graduated)
1986-1991 Technical education, (LBO-Mechanical engineering)
Course
2014 Seminars Product legislation (Mr. Hirschel)
2011/2012 Course soft skills, communication and coaching of engineers (Bridgemoore)
2009 Course vacuum 2 (Microcentrum)
2009 Course XRF (Panalytical)
2007 Course reliability engineering, (Microcentrum)
2006 Course project management 2, & principles of development 1(Philips-CTT),
2004 Course from idea till market (NOVU) 2003 Course applied electronics ( ROC)
2001 Course GD&T, project management 1(Microcentrum), MD4 (Greenock)
Novoferm Netherlands, February 2014 Manager Research and Development
Translation of customer demands in technical feasible solution, responsibility towards the projects technical
deliverables: QFD, performing FMEA’s/RCA’s
Preliminary research, feasibility studies and delivering technical specifications.(TRIZ, CRS)
Developing concepts, responsible of final design and TPD.
Managing team of engineers and multiple large projects (15fte’s) Bachelors/ masters
Integration of Six Sigma/ Lean/ DfX into the two R&D departments, WBSO/ RA support
Integration of Standardization & Normalization into the two R&D departments
Technical math assistance of U-Values, wind load, permeability, tribology and fatigue analysis
TSG
Project: Roth & Rau June 2013 - January 2014 A.i. Sr Mechanical Engineer/ Architect
Translation of customer demands in technical feasible solution
Responsible of the project technical specifications (CRS-SDS) Preliminary research and feasibility studies.
Designing concepts, responsible of final design and TPD, (lecturing green belt trainee)
Leading team of designers and scientist, (6fte’s) (CAD Pro -e)
Project: ASML Aug '10 –>May 2013 Material- coating & bonding technologist & TL bolt competence (12fte’s)
Team lead/ coaching bolt competence team, (technicians till PhD’s) arranging resources/ budget’s
R&D, cross sector bonding/ coating/ material/ tribology assist
Analysis and investigating root cause of fatigue modes of bolted connections
Writing design manuals/ technical reports, suppliers audits.
Seminars/ lectures/training, design reviews critical bolted connections
Updating and IT integration of bolt calculation program based on Roloff Matek 1-2 and VDI 2230-1
Study of temperature effects at bolted connections ( +400°C and -75°C)
16 maart 2015 [Curriculum vitae M. van Bree MSc. ]
Curriculum Vitae | Milan van Bree MSc. 2 of 3
Project: Sapim Aug '12–>March 2013, A.i.Technologist/ development engineer
Feasibility studies, bonding/ coating/ material/ tribology advice/assist, (SDS-CRS)
Leading brainstorm sessions and product-process development, facilitating FMEA’s and in control of planning
Project: Biocomp July 2009 -> July 2010 A.i. Research and Development,
In cooperation with implantologist responsible of product development of tooth - and cranio facial implants
Monitoring of business quality processes (QC), literature and patent research
FEM (Inventor) of tooth - and cranio facial implants at bone structures
PANalytical Sept 2007 –> June 2009 Development Engineer, Technologist
Optimisation of process & product development with technology pull strategy
R&D acc.6 sigma/ TRIZ, patent & literature research, project leader new developments, FMEA facilitator
Development of concepts and manufacturing prototypes (x-ray, high vacuum, material, coating technology)
Tegema
Project: NTS & VDT Okt 2006 → Aug 2007
A.i. Sr Mechanical engineer responsibility: rear transmission TATA Nano (VDT Tilburg)
A.i. Architect / Sr designer SLS rapid prototyping machine 3D printer (NTS- Huntsman (3M))
o Translation of customer demands in technical feasible solution (CRS) o Responsible of the mechanical and thermal project specifications (SDS)
o Preliminary research, feasibility studies. (NX3 & Inventor10, Comsol)
o Designing concepts, responsible of final design and TPD, FEA of robust designs
o Leading team of engineers and designers, (4fte’s)
o Design of patent worthy products (consuming products/tooling and machines)
Brunel
Project: PiNS (formal CFT ) Jan 2004->Sept 2006 R&D and Concept engineer
(Lumiled, Automotive LED, iPill, Lab on Chip) Design of patent worthy tooling towards automotive led production
Process optimisation automotive led, design production methods towards iPill laser technology
Precision engineer, consultancy of DfX.towards multiple small projects
Project: Brabantia N.V. Jan. 2002->Dec 2003 R&D engineer, inventor/ product designer
Feasibility studies towards new developments, leading brainstorm sessions.(TRIZ)
FEM analyses of personal developed models, (COSMOS/Comsol/Sam 4/ Mathcad)
Yield analysis of powder coating process, describing new W.O.W. Initiating of ideas-concepts-scale model and 1:1 proto typing- towards to patents
Managing of TRIZ initiated developed products, managing transfer to series/ mass production.
Technology cooperation/assist with industrial product designers, developing new products
Design and initiation of test equipment, risk analyses machine guidelines CE norm.(NEN 1010)
Brabant Engineering Projects: Philips July 1996-> Dec. 2001
Designer, project engineer (Philips Oss and Eindhoven- Lighting)
Engineering of sub-assemblies of TL-bulb armatures and ballasts (1year)
Design CD-lens equipment. Philips Optics
R&D and precision engineer (Philips NXP-ITEC) Semiconductors
Responsible: Proto engineering pick & place machines nm/ µm technology (2years)
Proto engineer: Pick & place machines, modification of modules and parts towards development
(front-mid and back-end machines chip industry ( reel to reel)
Mechanic and design engineer / assist project leader (Aken and Eindhoven), Philips Components
Floor plan investigation and feasibility, preparation for move to Aken (Germany). (½ year)
Precision engineer, Philips Lighting (1½ year)
Conventional/ turning, milling, dicing, grinding, welding, precision proto assembly
After1 year responsibility: leading team of technicians (approx. (25-30 FTE’s)
16 maart 2015 [Curriculum vitae M. van Bree MSc. ]
Curriculum Vitae | Milan van Bree MSc. 3 of 3
3D Design Skills Inventor/ NX / Solid works/ solid edge/ solid designer/ Pro E
Practicum Skills Machining: conventional/ turning, milling, dicing, grinding.
Bonding: welding, gluing technology, brazing, diffusion, friction welding, fastening (bolts).
Metallurgy: An organic as organic /expertise in coatings as bonding advise (adhesives/brazing/soldering)
Professional (expert) knowledge level of :
(Design rules of ) bolted and glued connections
(Design rules of) form fit and force fit applications
(Design rules of ) magnetic permeability applications
(Design rules of) food/ cleanroom/ (UHV) vacuum applications
Fatigue modes of bolted and grounded connections
Exotic metals/ thin film, PVD-CVD-ALD and it’s derivate.
Oral/verbal foreign languages Written and oral expertise: Dutch, German and English, (educator level)
Development skills TRIZ,/ QFD/ DFSS/SWOT/ FTA/RCA/DfX/ FMEA Facilitator/ Black Belt.
MS Office- MS projects, Teamcenter,
Social contribution From 2009-> Current, Project lead large public events (KNGU)
From 1983-> Current, Chairman, ornithologist, bird association.
From 1994-> Current, National coach trainer gymnastics, (association member KNGU PGTH)
From 1995-> Current, Coach, trainer and project lead large public events (local gymnastic association, KDO)
1998- 2005 Sport instructor police and fire brigade
1995- 2003 National gymnastic coach Olympia Cuijk - Boxmeer
Self-Reliance Skills Creative, pragmatically, hands-on mentality, team player, no-nonsense, coaching, proactive, helicopter view as
into detail, inventor, out of the box thinking, forward thinker, empathically
Willing to learn Motivated, adaptable, enthusiastic, active, learner and inquisitive
Hobbies: Maintaining own classic car, (1952, Holden Ute)
Ornithologist, gymnastics
One word phrase: Chameleon
Salary: Markt conform, WO educated 10 + years’ experience
References: Paul Brom, sr. lead engineer ASML : 0626004045
Gerard Elders, Formal Sr. project manager TSG, ([email protected].) Joost Coolen, Manager operations Novoferm, [email protected]
Ambition: Architect, System designer, Scientist,Teamlead (coaching engineers) R&D.
In the year 2020: PhD, modification of Roloff Matek, ( 2 chapters)
- Torsion springs & bolts