philmore pg. 209-224 catalog

209

BATTERY HOLDERS

AA CELL HOLDERS

No. BH3311

For (3) AA cell (UM-3)W/Cover Plus On-Off switch, 6” Lead Wire Connection

No. BH341

For (4) AA cell (UM-3)With Standard Snap Connection

No. BH3411

For (4) AA cell (UM-3)W/Cover Plus On-Off switch, 6” Lead Wire Connection

No. BH343


No. BH344

For (4) AA cell (UM-3)With Solder Lug Connection

No. BH3611

For (6) AA cell (UM-3)With Snap Cover, 6” LeadWire Connection

No. BH362S


No. BH363


No. BH381M

For (8) AA cell (UM-3)With Solder Lug Connection And Mounting Ears

No. BH383


No. BH3103

For (10) AA cell (UM-3)With Solder Lug Connection

210

BATTERY HOLDERS

No. BH411

For (1) AAA cell (UM-4)With Solder Lug Connection

No. BH411P

For (1) AAA cell (UM-4)With PC Board Mounting

No. BH421


No. BH4211

For (2) AAA cell (UM-4)With Cover Plus On-OffSwitch, 6” Lead Wire

No. BH431


No. BH4311


No. BH441P


No. BH441S

For (4) AAA cell (UM-4)With Standard Snap Connection

AAA CELL HOLDERS

No. BH421P


211

BATTERY HOLDERS

AAA, N, 9V, 1/2 AA CELL HOLDERS

No. BH4411


No. BH443


No. BH443S

For (4) AAA cell (UM-4)With Standard Snap Connection

No. BH511

For (1) N cell (UM-5)With Solder Lug Connection

No. BH511P

For (1) N cell (UM-5)With PC Board Mounting

No. BH521

For (2) N cell (UM-5)With Solder Lug Connection

No. BH102

For (1) 9 Volt batteryAluminum Holder With Solder Lug Cnnection

No. BH910

For (1) 9 Volt batteryWith Solder Lug Cnnection

No. BH980

For (1) 9 Volt batteryMetal Clip Holder

No. BH531

For (1) 1/2 AA (3.6V Lithium Battery)With PC Board Mountig

No. BH541

For (1) 1/2 AA (3.6V Lithium Battery)With Solder Lug Connection And Switch

212

No. BH2020

Coin cell Holder, For CR1220 &Other 12.5mm x 2mm Coin Cells, PCB Mount

No. BH2025

Coin cell Holder, For CR1225 &Other 12.5mm x 2.5mm Coin Cells, PCB Mount

No. BH2032

Coin cell Holder, For CR2032 &Other 20mm x 3.2mm Coin Cells, PCB Mount

No. BH2038

Coin cell Holder, For CR2325 &Other 23mm x 2.5mm Coin Cells, PCB Mount

BATTERY HOLDERS, SNAP COVERS

COIN CELL HOLDERS

No. BH2040

Vertical Coin cell Holder, For CR2032 &Other 20mm x 3.2mm Coin Cells PCB Mount

No. BC9 - 3” Leads, 5Pc. / Pk.No. BC100 - 10” Leads, 2Pc. / Pk.

9V Battery Snap, Vinyl Cover

No. BC109 - 6” Leads, 2Pc. / Pk

“T” Shape 9V Battery Snap, Vinyl Cover

No. BC120 - 6” Leads, 2Pc. / Pk

9V Battery Snap, Molded Plastic Cover

No. BH129 - 6” Leads, 2Pc. / Pk

“T” Shape 9V Battery Snap, Molded Plastic Cover

Male and female batttery snaps that mate with all of the battery holders and withstandard 9V batteries. 10” lead wire color coded to match polarity of 9V snap onbattery holder.

Philmore No. Description

No. BC7B MALE SNAP WITH 10”BLACK LEAD WIRE (BULK)

No. BC8B FEMALE SNAP WITH 10”RED LEAD WIRE (BULK)

No. BC6 2 PAIR OF MALE ANDFEMALE SNAP W/10”WIRE LEAD. (PACKAGED)

No. 2090 - Bulk PackedNo. 2090-25 - Display Package of 25

Fahnstock Clip3/4” Long, .144” Hole (No. 6) Brass Nickel Plated

213

TERMINAL BLOCKS & KNOBS

TERMINAL BLOCKSA terminal block designed to be end-stackable on a PC board so that thedesigner may have any number of contacts needed. The design providessecure wire protection for a broad range of wire sizes (up to 14 ga. max).The housing is molded of 94V-0 fire retardent plastic. Six pieces per pack-age; available in bulk, add “B” suffix to part number. (i.e. TB132B for Bulk)

Housing: Polymide 66 resin, blueTerminals: 0.9 x 0.9 Brass, tin platedScrews: M2.6 x 0.45P, steel, zinc platedWire cage: Brass, Nickle plated

Rated: 10 Amp. 300 VACTemperature rating: -55°C to + 125°CWire range: 14 AWG max.Dielectric Strength: 2000 VAC min.

for 1 minuteInsulation Resistance: 500 M ohm min.

at 500 VDCPitch: 5 mmNumber of pole: 2, 3

STRAIGHT TYPE RIGHT ANGLE TYPENo. TB132 - 2 Pos. Pkg./6 No. TB142 - 2 Pos. Pkg./6No. TB133 - 3 Pos. Pkg./6 N0. TB143 - 3 Pos. Pkg./6

Fluted with skirt indicator line on top .75” Dia., .50” High

Color: BlackNo. 3010

Fluted with taper skirt indicator line on top .94” Dia., .60” High

Color: BlackNo. 3035

Straight knurl with arrowhead indicator on top .82” Dia., .50” High

Color: Black with Aluminumtop inlay

No. 3055

Straight Knurl 0-9 num-bers on

aluminum skirt1.15” Dia., .70” High

Color: Black withAluminum top inlay

No. 3020

Straight knurl 0-10 num-bers on

aluminum skirt1.46” Dia., .60” High

Color: Black withAluminum top inlay

No. 3045

Control pointer knob withindicator line on top & side

1” Dia., .60” HighColor: BlackNo. 3050

Straight knurl pointer indi-cator line on side pointer

.54” Dia., .48” HighColor: Black with Aluminum

top inlayNo. 3060

Fluted grip with indicator line

Color: Black with Aluminumtop inlay

.60” Dia., .46” HighNo. 3025

.92” Dia., .62” HighNo.3030

Ribbed with skirt indicator line

Color: Black withAluminum top inlay.80” Dia., .67” High

No. 30151.35” Dia., .86” High

No.3040

KNOBSBlack bakelite material, brass insert for 1/4” shaft with set screw.

SPECIFICATIONS

Black pointer knob withindicator line. 1.25” long

No. 277AP

Straight knurl, aluminumskirt with black indicator

arrow. 1.375” DIA., .56” highColor; Black with aluminum

top inlay.No.337

For bulk pack add suffix letter “B”

Precision Tuning VERNIER DIAL CONTROL KNOBS

A vernier dial control knob will provide smooth andprecise tuning for either a potentiometer or variable capaci-tor. Planetary drive provides 8 to 1 ratio, allowing for veryfine adjustment of standard controls. The metal dial plate iscalibrated by etching and paint filling on brushed satin finishfor a very attractive appearance. Knob is calibrated over180 degrees of turn, reading from zero to maximum settingby clockwise rotation. Fits standard 1/4” control shafts andmounts on surface of cabinet or chassis. Very useful withany circuit where fine “tuning” is going to make life easier.

Part no. Diameter Calibration

S36 1 1/2” 0 to 10 S38 1-1/2” 0 to 100S50 2” 0 to 100

No. S50

Rear View

No. S36 No. S38

214

COOLING FANS

60 mm (2.36”) Square Cooling Fans

These cooling fans are quite popular in electronic equipment. They are available in several voltages and CFM( cubic feet per minute) air flow types. The fans have brushless DC motors which are polarity protected.

Specifications:

Motor: DC BrushlessCase & Impellers: 94V-0 PlasticOperating Temp.: -20o C - 80o C Ball Bearing

-10o C- 50o C Sleeve BearingLife Expectancy: 70,000 HoursUL, CUL, CSA Approvals


Specifications:

Motor: AC or DC BrushlessCase & Impellers: 94V-0 PlasticOperating Temp.: -20o C - 80o C Ball Bearing



These miniature cooling fans are quite popular in small electronic equipment including computers where heat is a problem or can causeproblems. The fans are available with brushless DC motors which are polarity protected.

Specifications:

Motor: DC BrushlessCase & Impeller: 94V-0 PlasticOperating Temp.: -20o C - 80o C Ball Bearing



Specifications:

Motor: AC or DC BrushlessCase & Impellers: 94V-0 PlasticOperating Temp.: -20o C - 80o C Ball Bearing


92 mm (3.62”) Square Cooling FansThese cooling fans are quite popular in electronic equipment including copiers, computers,

& data processing. They are available in several voltages and CFM (cubic feet per minute)air flow types. The fans are available with brushless DC or AC motors which are polarityprotected.

AMD K6-II CPU COOLING FAN

This CPU cooler is designed to fitthe AMD K6-II processor withspeeds up to 550MHz. Thedevice has low acoustical noise,quick easy installation, and a ballbearing motor.

No. 70-8156 AMD K6-II CPU Cooler

Part No.Thickness

mm

Speed

RPM

Max.

CFM

Noise

db

Bearing

StyleVoltage

Current

(ma)

70-4012 10 6500 7.7 29 Sleeve 12V DC 130

70-4128 10 6500 7.7 29 Ball 12V DC 130

Specifications:

Motor: DC BrushlessCase & Impeller: 94V-0 PlasticOperating Temp.: -20o C - 80o C Ball Bearing


Part No.Thickness

mm

Speed

RPM

Max.

CFM

Noise

db

Bearing

StyleVoltage

Current

(ma)

70-6128 15 3900 15 28 Ball 12V DC 140

70-6012 25 4000 24 29 Sleeve 12V DC 140

Part No.Thickness

mm

Speed

RPM

Max.

CFM

Noise

db

Bearing

StyleVoltage

Current

(ma)

70-8275 25 3200 29 34 Sleeve 12V DC 190

70-8128 25 3000 22 35 Ball 12V DC 120

70-6275 25 3000 24 28 Ball 120V DC 140

Features

>Fan size 50 x 50 x 10 mm

>Thermal interface: Chomerics T-725

>Operation Voltage: 7-12VDC

>Operating Current: 1.32W

>Noise Level: <30.4dB

>Rated Speed: 4800 RPM

>Air Flow: 11.5CFM

>Electrical Connection: 4 pin plug

>Dimensions w/ heat sink: 50x50x42mm

Part No.Thickness

mm

Speed

RPM

Max.

CFM

Noise

db

Bearing

StyleVoltage

Current

(ma)

70-8415 25 2400 69 35 Sleeve 12V DC 340

70-1128 25 3000 86 42 Ball 12V DC 240

70-1248 25 3000 86 42 Ball 24V DC 24070-6412 25 2900 105 33 Ball 120V DC 140

Part No.Thickness

mm

Speed

RPM

Max.

CFM

Noise

db

Bearing

StyleVoltage

Current

(ma)

70-8325 25 2400 36 39 Sleeve 12V DC 220

70-9128 25 3000 50 33 Ball 12V DC 180

70-6325 25 2900 31 30 Ball 120V DC 140

These cooling fans are quite popular in electronic equipment including copiers, and computers. They are available inseveral voltages and CFM ( cubic feet per minute) air flow types. The fans are available with brushless DC or AC motorswhich are polarity protected.

These cooling fans are quite popular in electronic equipment. They are available in several voltages and CFM ( cubic feet perminute) air flow types. The fans have brushless DC motors which are polarity protected.

Plastic Fan Filter Kits

These kits are designed to reduce noise, and remove impurities up to 45 PPI (Parts Per Inch). These kits consist of three parts. A Fan Guard,Media Filter, and a Retainer.

Specifications:

Guard;UL94V-0 PlasticUL .25 SpacingReduces Noise Level

Media Filter;PU (polyurethane) Foam45 PPIEasy Clean

Retainer;UL94V-0 PlasticLow Air ResistanceSnap-on Installation

Part Fan Size PPINumber (mm) Filtering

70-5340 40mm 4570-5360 60mm 4570-5380 80mm 4570-5392 92mm 4570-5312 120mm 45

Part Fan DimensionsNumber Size Dia. Mt. Centers

70-6340 40mm 1.24” 1.26”70-6360 60mm 1.97” 2.09”70-6280 80mm 2.81” 3.02”70-6330 92mm 3.25” 3.52”70-6415 120mm 4.125” 4.31”

Fan Guards

These guards are designed to fit the fans Philmore offers as well as other standard size models. They are to be used to keep foreign objectsfrom interfering with the operation of the fan as well as for safety purposes.

Specifications:

Nickel Chrome Steel WireWelded JointsMeets UL & CSA Standards

Fan Power Cords

These fan power cords fit Philmore models and other competitor fans with plug-in terminals. Philmore offers several configurations for yourconvenience.

No. 70-6420 - Straight 42” LongNo. 70-6424 - 90o 24” longNo. 70-6436 - 45o 36” long

No. 70-6420 No. 70-6424 No. 70-6436

COOLING FAN ACCESSORIES

215

No. 6092S

No. 1051B - BrownNo. 1051V - Ivory10A-250V15A-125VUL Approved

Non Polarized Plug

AC RUBBER ATTACHMENT PLUG BAKELITE FLAT GRIP CAP

With brass plated steel spring prongs. 15 Amps-125Volts. Cord hole .450”. Sturdy in construction. Canbe used for heavy duty work, as well as for regularcord sets.

No. 8901

JIFFY PLUG

No tools, no stripping. Perfect contact in 5 sec-onds. Cords extends from side of plug.

Non Polarized. Color: White

216

STRAIN RELIEFS & WIRE

HOOKUP or LEAD WIRE22 gauge, solid copper hookup wire with PVC insulation; UL list-ed 1007/1569. This is the standard at board level and also fits ourPrototype Boards, both solderless and solder types. Supplied in25 foot hanks in various colors and also in an assortment.

SPECIFICATIONS:UL 1007/1569

Insulation:.016” thk. PVC 105oC 300-volts nominal O.D. .0626”

No. 12-2211 - black No. 12-2214 - white No. 12-2216 - redNo. 12-2217 - greenNo. 12-2218 - yellowNo. 12-2276 - 5 piece kit, 1 each of 5 colors

MAGNET WIRE

Part No.

12-123412-123212-123012-122812-1226

AWGSize3432302826

Approx. Footageper 1/2 lb. spool

4050 feet2510 feet1640 feet1032 feet650 feet

Part No.

12-122412-122212-122012-121812-1216

AWGSize2422201816

Approx. Footageper 1/2 lb. spool

408 feet251 feet160 feet101 feet62 feet

Commonly used for winding R.F.coils and transformers and generallab or school classroom assembly.This is a standard round, pure cop-per wire with a polyimide enamelinner-coat and polyurethane overcoat; Thermo Class 130. The insu-lation will stand up and not crackduring winding of tight coils, highspeed winding etc..

UL Listed; Sizes for most popular AC power cords. Recognized under Component Program of Underwriters’Laboratories File No. E-10793. Certified by Canadian Standards Assoc. File No. LR-66162.This series of AC cord bushing provides the most accepted method of securing AC power cords at the point wherethey enter/exit the chassis or cabinet. These bushings are generally regarded as permanent and will prevent dam-age to the wire as well as securing the wire against any possible in-out motion.Select the type needed first by wire type and gauge and then the maximum panel thickness. In cases where thewire is a special, not listed in the chart, use the approximate wire size column.Molded of Nylon; the two pieces of these strain reliefs are permanently connected by an integral tether to preventthem from becoming separated.Part no. shown is for one package containing ten pieces. For bulk package add a “B” to the end of number andorder in standard package multiples of 50 pieces.

PartNumber

65-1000

65-1010

65-1015

65-1020

65-1025

65-1030

65-1035

65-1040

65-1045

65-1050

65-105565-1055

65-106065-1060

65-1070

Dim.D

.406”

.406”

.406”

.406”

.433”

.433”

.583”

.583”

.583”

.583”

.748”

.748”

.818”

Max.“Thk.F

.0625”

.098”

.0625”

.098”

.0625”

.098”

.0625”

.125”

.0625”

.125”

.063”

.125”

.125”

HoleB

.390”

.390”

.465”

.465”

.452”

.452”

.55”

.55”

.55”

.55”

.660”

.660”

.750”

HoleA

.433”

.433”

.5-.515”

.5-.515”

.5-.515”

.5-.515”

.625”

.625”

.625”

.625”

.780”

.750”

.780”

.750”

.750”

Approx.Wire Size

.118x.220”

.118x.220”

.150x.300”

.150x.300”

.25-.291”

.25-.291”

.30”

.30”

.320-.362”

.320-.362”

.433”.362-.413”

.433”.362-.413”

.472”-.598”

UL WireType

SPT-1

SPT-1

SPT-2

SPT-2

SVI SVT

SVI SVT

SJT-18/3

SJT-18/3

SJT-16/3

SJT-16/3

SJT-14/3SJT-14/3

SJT-14/3SJT-14/3

SJT-12/3

WireShape

Flat

Flat

Flat

Flat

Round

Round

Round

Round

Round

Round

RoundRound

RoundRound

Round

STRAIGHT-THROUGH STRAIN RELIEF BUSHINGS

Maximum Chassis ThicknessPart actually has

additional clearance.

Mounting Hole

STRAIN RELIEF TOOL No. 63-640

High quality assembly tool for Nylon strain reliefs. Adjustable for all Philmore & other Heyco- Type strain relief bushings, that assemble into holes up to 7/8” diameter. Spring loadedaction (replaces Philmore WS40).

PHILMORE STRAIN RELIEF TOOL

No. 63-640

217

SPECIFICATIONS

STRANDED TINNED COPPER

PVC INSULATION (10 COLORS) .016”

UL STYLE 1007/1569 VM-1

CSA TR-64

TEMPERATURE -40 to 105° C.

Rated 300 volts

Philmore Hook-up WireUL Style 1007/1569

Insulated copper wireSolid and stranded types.

Philmore offers all of the most called for gauges in UL listed, 300

volt hook-up wire for use in electronic and electrical circuits. Ten col-

ors in wire gauges 26 through 16 AWG and your choice of 25 or 100

foot spools.

Color 25 ft. Spool 100 ft.

Spool

Black 78-22610 78-22640

Brown 78-22611 78-22641

Red 78-22612 78-22642

Orange 78-22613 78-22643

Yellow 78-22614 78-22644

Green 78-22615 78-22645

Blue 78-22616 78-22646

Violet 78-22617 78-22647

Gray 78-22618 78-22648

White. 78-22619 78-22649

26 AWG STRANDED .051 nom.OD 7X34 strands


Spool

Black 78-22410 78-22440

Brown 78-22411 78-22441

Red 78-22412 78-22442

Orange 78-22413 78-22443

Yellow 78-22414 78-22444

Green 78-22415 78-22445

Blue 78-22416 78-22446

Violet 78-22417 78-22447

Gray 78-22418 78-22448

White. 78-22419 78-22449

24 AWG STRANDED .056 nom.OD 7X34 strands


Spool

Black 78-22210 78-22240

Brown 78-22211 78-22241

Red 78-22212 78-22242

Orange 78-22213 78-22243

Yellow 78-22214 78-22244

Green 78-22215 78-22245

Blue 78-22216 78-22246

Violet 78-22217 78-22247

Gray 78-22218 78-22248

White. 78-22219 78-22249

22 AWG STRANDED .062” nom.OD 7X30 strands


Spool

Black 78-22010 78-22040

Brown 78-22011 78-22041

Red 78-22012 78-22042

Orange 78-22013 78-22043

Yellow 78-22014 78-22044

Green 78-22015 78-22045

Blue 78-22016 78-22046

Violet 78-22017 78-22047

Gray 78-22018 78-22048

White. 78-22019 78-22049



Spool

Black 78-21810 78-21840

Brown 78-21811 78-21841

Red 78-21812 78-21842

Orange 78-21813 78-21843

Yellow 78-21814 78-21844

Green 78-21815 78-21845

Blue 78-21816 78-21846

Violet 78-21817 78-21847

Gray 78-21818 78-21848

White. 78-21819 78-21849



Spool

Black 78-21610 78-21640

Brown 78-21611 78-21641

Red 78-21612 78-21642

Orange 78-21613 78-21643

Yellow 78-21614 78-21644

Green 78-21615 78-21645

Blue 78-21616 78-21646

Violet 78-21617 78-21647

Gray 78-21618 78-21648

White. 78-21619 78-21649


HOOK - UP WIRE


Spool

Black 78-12410 78-12440

Brown 78-12411 78-12441

Red 78-12412 78-12442

Orange 78-12413 78-12443

Yellow 78-12414 78-12444

Green 78-12415 78-12445

Blue 78-12416 78-12446

Violet 78-12417 78-12447

Gray 78-12418 78-12448

White. 78-12419 78-12449

24 AWG SOLID Copper insulated

SPECIFICATIONS

SOLID COPPER

PVC INSULATION (10 COLORS)

.016” Insulation thickness

UL STYLE 1007/1569 VM-1

CSA TR-64

TEMPERATURE -40 to 105° C.

Rated 300 volts


Spool

Black 78-12210 78-12240

Brown 78-12211 78-12241

Red 78-12212 78-12242

Orange 78-12213 78-12243

Yellow 78-12214 78-12244

Green 78-12215 78-12245

Blue 78-12216 78-12246

Violet 78-12217 78-12247

Gray 78-12218 78-12248

White. 78-12219 78-12249



Spool

Black 78-12010 78-12040

Brown 78-12011 78-12041

Red 78-12012 78-12042

Orange 78-12013 78-12043

Yellow 78-12014 78-12044

Green 78-12015 78-12045

Blue 78-12016 78-12046

Violet 78-12017 78-12047

Gray 78-12018 78-12048

White. 78-12019 78-12049



Spool

Black 78-11810 78-11840

Brown 78-11811 78-11841

Red 78-11812 78-11842

Orange 78-11813 78-11843

Yellow 78-11814 78-11844

Green 78-11815 78-11845

Blue 78-11816 78-11846

Violet 78-11817 78-11847

Gray 78-11818 78-11848

White. 78-11819 78-11849


218

CORDS AC & POWER

A standard insulated, two conductor cord with a rib on one conductor for polarity indication. Available in popular colors. The 25 foot

lengths are supplied in blister display packages. The longer lengths are supplied on spools with a clear, protective shrink-wrap.

SPT cord sets are typically used in light duty appli-

cations, such as table radios, household lamps and

so forth. SPT cords are two conductor, 18 gauge.

SJT cord sets are three conductor, counting the

ground wire, and regarded as hard service cord sets,

frequently used with bench tools such as grinders,

saws etc.. This is a popular cord set for equipment of

all kinds. SJT cord sets are supplied with a standard

NEMA 5-15P power plug. Both of these series are of

fully molded construction, the plug and cord are per-

manently connected.

A direct replacement for the new Panasonic Cassette Recorders, as well as for other

recorders and many portable TV sets. Mates with male receptacles having 3/32” diameter

pins on 0.275” centers. Rated 7 amps at 125V AC, this cord set is UL Approved. 6 feet long.

Top: SPT Type AC Cords

Bottom: SJT Type AC Cords

SPECIFICATIONS:AWG Gauge: 18 Gauge copper

Stranding: 41 strands/ 34 Gauge

Insulation Thickness: 0.030”

Insulation Material: PVC

Working Voltage: 300V AC

Temperature Range: 105oC

Size:Nominal O.D.: 2.65 x 5.35mm or

.104” x .210”

UL Listed CSA Approved

18 AWG SPT-1 PARALLEL POWER CORD UL listed

AC POWER CORD SETS for OEM and Replacements

AC CORD SET - for Cassette Recorders

COLOR

Black

Brown

White

25 ft.

48-14248-14448-146

100 ft.

48-10248-10448-106

250 ft.

48-25248-25448-256

1000 ft.

48-100248-100448-1006

2000 ft.

48-200248-200448-2006

Part No.

SPT1182-6BL

SPT1182-6BR

SPT1182-6WH

SPT1182-9BL

SPT1182-9BR

SJT143-3

SJT143-6

SJT163-3

SJT163-6

SJT163-9

SJT183-6

SJT183-9

UL Wire Type

SPT-1

SPT-1

SPT-1

SPT-1

SPT-1

SJT

SJT

SJT

SJT

SJT

SJT

SJT

Wire Gauge

18 x 2

18 x 2

18 x 2

18 x 2

18 x 2

14 X 3

14 x 3

16 x 3

16 x 3

16 x 3

18 x 3

18 x 3

Length

6 ft.

6 ft.

6 ft.

9 ft.

9 ft.

3 ft.

6 ft.

3 ft.

6 ft.

9 ft.

6 ft.

9 ft.

Color

Black

Brown

White

Black

Brown

Black

Black

Black

Black

Black

Black

Black

Amps

10

10

10

10

10

15

15

15

13

13

10

10

No. 2464PNo. 2464PB bulk packaged

No. 2465P - Replacement power cord for

Sony recorders and boom boxes

No. 2465PB bulk packaged

No. 2465PNo. 2464P

219

TWIST-ON WIRE CONNECTORS

Molded of rugged, impact and heat resistant plastic. Color identifies size. Heavy ribbed bodies for easy gripping. Display package of 10.

No. WN66 - Large - redNo. WN66B - bulkWire size: #18 to #10Rating: 600v/ Building wire,1000v/ Signs & Fixtures

No. WN33 - Small - orangeNo. WN33B - bulkWire Sizes: #18 to #16Rating: 300V/Building wire,300v/Signs & Fixtures

No. WN44 - Medium - yellowNo. WN44B - bulkWIRE SIZES: #18 to #12Rating: 600v/ Building wire,1000v/ Signs & Fixtures

UL Listed

REPLACEMENT AC PLUGS

Black; Solder Terminals

No. 8464

No. 8466

No. 8465

VINYL PLASTIC

ELECTRICAL TAPE

UL LISTED

66 ft. rolls x 3/4” wide,black vinyl tape, witha dielectric strength of12,000 volts, and ten-sile strength of 15 lbs.per inch. Thickness 7-9 mils. Flexiblestretch, waterproof, and will resist oil, gaso-line, salt water, alkalis, and sunlight.

No. PT2

No. PT2B -bulk packaged

AC CONNECTORS

The LKG Wire Knutt, A push - in wire connector, fast, alternative to wire nuts.The LKG Wire Knutt accommodate wire sizes from 22 to 12 AWG (solid conductors). Fast assembly! Strip wire (0.43” or 11 mm strip length) andpush it into the knutt. Fast and secure; use in machinery, house wiring etc. for fast and secure connection of wires of same size or various sizes.Available in sizes for joining from two to eight wires.

Specification:

Housing Material: Thermoplastic, UL 94V-2 flame retardentCurrent: 24A (VDE)Voltage: UL-600V, VDE-450V.Temperature Rating: 110ºCUL file No.: E - 113650

65-25265-253 65-254 65-255

65-258

UL Approved

No. R118J

CONVENIENCE RECEPTACLE

Suitable for accessory equipment power out-lets on amplifiers, pre-amplifiers, clock radiochassis, etc. Requires 1-1/16” x 7/16” rec-tangular cutout.Non Polarized Receptacle.

Part No. Color Wires

65-252 RED 2

65-253 ORANGE 3

65-254 YELLOW 465-255 GREY 565-258 BLACK 8

Panel mount 3 prong grounding receptacles, snap-in type, rated at 15A - 125VAC, UL approved. Black plastic.

AC Receptacles

No. 8535 - .250” Male Quick connector solder terminal

No. 8540 - .250” Female Quick connectterminal with wire protector

No. 8545 - 6” - 16 awg. wire leads terminal

(mounting hole: 0.96” x 0.87”) (mounting hole: 1.18” x 0.94”) (mounting hole: 1.18” x 0.94”)

C US

220

AC CONNECTORS

DEAD FRONT GROUNDING CAP

UL Listed & CSA Approved

No. 8515P

No. 8901

No. 6092S

No. 1051B - BrownNo. 1051V - Ivory10A-250V15A-125VUL ApprovedNon Polarized Plug

No. 8147V IvoryNo. 8147B Brown

No. 8419

No. 8400

UL and CSA Approved. This three-prong AC plugcan take wires up to #12. Removable insert used forthinner wire. Steel armor clad. New dead front design completely encloses thehousing, eliminating need for insulator and insuringagainst accidental short circuit.

RUBBER AC 3 WIRE PLUG


No. 8520

For .225” - .600” cord rubber plugs and femalereceptacles resist chemical and petroleum by-prod-ucts. Have low temperature flexibility and resist highheat.

3 WIRE FEMALE CONNECTOR

OFFICE EQUIPMENTAC CONVERTER (IEC STANDARD)

JIFFY PLUG

AC RUBBER ATTACHMENT PLUG

BAKELITE FLAT GRIP CAP

TRIPLE GROUNDING TAP

PARALLEL GROUNDING ADAPTOR

VINYL CUBE TAP

Three prong power cord connector (like industry typeIEC320-13) used on nearly all personal computers,printers, copy machines and other office equipment. No. 8522 In-Line Female (Rated 10A @ 250VAC)No. 8922 - Right Angle In-Line Female

(Rated 10 @ 250 VAC)No. 8523 In-Line Male (Rated 10A @ 250VAC)No. 8923 - Right Angle In-Line Male

(Rated 10A @ 250 VAC)No. 8527 Panel Mount Male, Snap-In Type.

(Rated 15A @ 250VAC)No. 8529 Panel Mount Male, Screw Mt. Type

(Rated 15A @ 250VAC)

Accepts 3 standard grounding plugs into a singlegrounding outlet. Ample room even for right angletype plug.Size of bakelite case: 3” x 1-3/32” x 1” deep.

Convert three-prong to two-prong caps. Polarizedblades and rigid grounding lug. Compact designextends only 1” from socket.

Heavy-duty, durable brown cube tap. One-piececonstruction. Brass spring prongs. Rated: 15A - 125V

No tools, no stripping. Perfect contact in 5 seconds.Cords extends from side of plug.

Non Polarized. Color: White

With brass plated steel spring prongs. 15 Amps-125Volts. Cord hole .450”. Sturdy in construction. Canbe used for heavy duty work, as well as for regularcord sets.


No. 8525For .225” - .600 cord.

ARMORED GROUNDING CONNECTOR

3-Contact AC Female Receptacle with Removable Cord Clamp

This yellow vinyl connector mates with our No.8515P dead front grounding cap. It takes 3 #12wires. Each circuit is separated by vinyl divider.Uses heavy duty, double wipes contacts. UL Listedand CSA Approved.

No. 8515J

Hospital Grade AC PLUG and CONNECTOR

Figure 1 Figure 2

A.C. power connectors meeting all federal specifi-cations for hospital use, as required by the NationalElectric Code (article 517). Verified by UL to latestfederal specifications. Both devices feature termi-nals separated by insulating barriers, captivespeed-screws assembly and integral strain relief.Both accommodate cords with an O.D. from .250” to.685”. The connector configuration is NEMA 5-15and rated at 15 amps at 125 volts AC.fig. 1 No. 8266 - male plugfig. 2 No. 8269 - connector

15A 125VNEMA 5-15

No. 8522

No. 8523

No. 8527

No. 8529

No. 8922

No. 8923

221

MULTITESTERS / CIRCUIT TESTERS

HI-VOLTAGE TESTING SCREWDRIVER

No. 903-150N

SPECIFICATIONS: 2000 OHMS--VOM

6 to 12 VOLT CIRCUIT TESTERwith HEAVY DUTY PROBE

DIGITAL MULTI-TESTER

TEST LIGHT

No. P5120For testing 80-250 Volts AC or DC. This handy combination screwdriver/testeris used for testing ground lines, open or shorted circuits.

No. P5128For testing all 6V and 12V systems: Auto, RV, Marine, Aircraft etc..Quickly finds short, grounds and open circuit.

No. P5100For testing 80-500 Volts AC or DC. The 5” insulated leads with finger guardinsulated tips make testing electrical circuits safe and easy. Red neon bulbglows with increasing intensity with increased voltage.

DISPLAYOVERRANGE INDICATIONMAXIMUM COMMON MODEVOLTAGEOPERATING ENVIRONMENT

STORAGE ENVIRONMENTTEMPERATURE COEFFICIENT

POWERBATTERY LIFE

DIMENSIONS

3 1/2 digit LCD .5” height, with polarity.3 least significant digits blanked

500V peak.0 to 50 C, less than 80% relative humidity up to 35º C,less than 70% relative humidity from 35º C to 50º C.-15º C to 50º C(0 to 18 C, 28 to 50), less than 0.1x applicable accuracy specification per C.9V alkaline or carbon-zinc battery (NEDA 1604)100 hours typical with carbon-zinc cells, 200 hours with alkaline cells.126mm long x 70mm wide x 24mm thick.(4.96”x2.76”x0.94”) Net weight 170g (6 oz)

Specifications:

Slip Grip Test Leads, Battery and Instructions are included

Sensitivity:DC Volt Ranges:

DC Current Ranges:AC Volt Ranges:

Resistances Ranges:Accuracy:

2000 ohms/volt2.5-10-50-500-1000.5-10-250ma.10-50-500-10005K-50K-500K3%DC, 4%AC

HIGHER PERFORMANCE POCKET MULTITESTER

No. UM22

Plastic test prod handles, 4” long, 3/8” diameter, with prods 1” long. Redand Black. Equipped with 48” kinkless plastic-covered leads .135” O.D.Available with either insulated banana plugs or phone tips at other end,to fit standard American jacks.

TEST LEADS

No. 466

Phone Tips

No. 467

Banana Plugs

Two 42” flexible, vinyl-covered test leads, heavily insulated toprevent high voltage breakdown and cut-through. 80 -strandcopper conductors eliminate wire fatigue and assure long life.Equipped with adaptor accessories most often used by ser-vicemen, this kit can perform virtually every test requirement.Each lead is attached to a 4-3/4” probe (1-red, 1-black).Banana plugs on each end have nickel-plated phosphorbronze springs to maintain rigid contact through many thou-sands of insertions. Heavy plated BRASS Adaptors-Color-coded Spade Lugs*-large enough for lab. instruments (up to1/4” dia. center post). Test prod phone tips(0.180” dia.)Strong spring action alligator clips. NP phone tips.-notinsulated. Each insulated adaptor completely covers bananaplugs to eliminate accidental contact, avoiding shorts.

DELUXE UNIVERSAL SOLDERLESS TESTLEAD SET

No. SA15

TOOLS

10 pc. TOOL SETA tool for all applications for trimmer adjustments. Set

includes square tips, hex tips, different size screwdriver

blades and recessed blades. Manufactured with tough cel-

con material.

No. 63-910

10 PIECE ELECTRONIC COMBINATION WRENCH SET

This fine quality set of 10

combination wrenches is

excellent for electronic repair

and service. The size and

thickness are especially suit-

ed for technician needs.

The wrenches are the follow-

ing sizes: 5/32”, 3/16”, 1/4”,

7/32”, 15/64”, 5/16”, 9/32”,

3/8”, 11/32”, and 7/16”. All

are hot forged and chrome

plated.No. 63-608

ALIGNMENT TOOLS

MINIATURE POTENTIOMETER, “TRIMPOT” TOOL

One end is a recessed blade for non-slip adjustment of miniature

potentiometers that have a protruding adjustment screw. The other

end has a protruding metal blade for pots with flush screw-slot

adjustment. Small steel tips have negligible flux-effect: body is

molded of anti-static plastic. Replaces types 8608, AS8608.

No. 63-8608

SQUARE and HEX ALIGNMENT TOOLSquare: .060” Hex: 0.10”

A double-ended, anti-static alignment tool for ferrite core trans-

formers. One end is a square .060” Tip with an additional protrud-

ing flat (.024” thick) blade. The other end is a 0.10” hex with a pro-

truding (.039” thick) blade. Replaces types 9440 and AS9440..

No. 63-9440

STEEL TIP DUAL ALIGNMENT TOOL

Recessed steel tip one end, protruding steel tip on the other. Tool

shaft dia. 7/32” (5.5mm). The recessed tip fits a no.6 slotted shaft

common to many I.F. transformers. The protruding tip is .130” wide

and protrudes .190”. Molded of anti-static material. Replaces types

8276 and AS8276.

No. 63-8276

DOUBLE HEX ALIGNMENT TOOL

A broad usage tool with stepped .078” hex and 0.10” hex on one

end, preceded by a fine .020” x .065” flat blade. The opposite end

is a 0.10” hex preceded by a .030” x .10” flat blade. Overall length

is 7-9/16”, molded of durable Nylon.

No. 63-9297

LONG REACH ALIGNER, WITH HANDLE

A plastic alignment tool with a 0.02” x .080” steel tip. Length of

shaft from tip to handle is 5-3/4”. overall tool length is 7-7/8”. Shaft

is somewhat flexible for tight spots; handle provides better grip

than regular alignment tools.

No. 63-5001

DOUBLE 078 HEX ALIGNERHEX: .078”

A Nylon tool .078” hex on both ends; one end undercut for reach-

ing through to a bottom slug, the other with a stop to prevent over-

reaching. Replaces type 9300.

No. 63-9300

222

223

TOOLS

ALIGNMENT TOOLSSPECIAL HEX-TIP TOOL

Hex: 0.10”

On one end, flat tip (0.025” thick x 0.10” wide) is followed by a

0.10” hex. The opposite end is an undercut 0.10” hex. Overall

length, 5”. Replaces type 8606.

No. 63-8606

DOUBLE END HEX TOOLHex: .125”

One end is an under cut .125” and other is a .125” hex preceeded

by a flat (.025” thick x .10” wide) blade. Entire tool is molded

Nylon. Replaces type 9091.

No. 63-9091

SCREWDRIVER-HEX COMBINATION TOOLHex: .078”

One end is an undercut 0.078” hex tip and other is a screwdriver

style tip that is 0.10” in diameter and tapers to 0.015” thick. Overall

length: 5-5/16”, molded Nylon. Replaces type 9304.

No. 63-9304

SCREWDRIVER-HEX COMBINATION TOOLHex: .092”

One end is an undercut 0.092” hex tip and other is a screwdriver

style tip that is 0.10” in diameter and tapers to 0.015” thick. Overall

length: 5-5/16”, molded Nylon. Replaces type 8282.

No. 63-8282

TELEVISION ALIGNMENT TOOL SET

Kit contains the five most commonly needed tools for television

service. Also included is an extender that may be used as an

extension handle when a longer reach tool is needed. Kit is sup-

plied in a segmented pouch to keep tools together.

Contains: 63-9300 63-860663-8282 63-909163-9304 Extender

No. 63-8454

SQUARE and HEX ALIGNMENT TOOLSquare: .060” Hex: 0.10” & Blade

A double-ended, molded nylon tool: overall length is 4-3/4” One

end is a square .060” tip with protruding blade from a 0.10” hex.

The other end is a flat (.039” thick) blade which is followed by an

undercut .10” hex. A tool frequently needed in color copier mainte-

nance

No. 63-9442

DOUBLE ENDED HEX TOOLHex: 0.078”

Undercut .078” hex on one end and on the other the hex is

stopped with a larger diameter shaft. Overall length is 5.33”.

Molded Nylon.

No. 63-9301

DOUBLE ENDED HEX TOOLHex: 0.10” & .087”

A dual ended tool with an undercut 0.10” hex on one end and a

standard .087” (for 2.2mm cores) hex on the other. Overall length

is 5.6”. Molded Nylon.

No. 63-8603

TECH’S ALIGNMENT TOOL KITA general purpose kit containing four tools with a variety of need-

ed tips. Includes tools for most common ferrite core adjustments

used in today’s circuits. Supplied in a plastic pouch. Contains tool

Nos.: 63-8603, 63-9301, 63-9442, and 63-9297.

No. 63-8420

224

TOOLS

20-pc. PERSONAL COMPUTER TOOL KITDELUXE TOOL KIT for complete field service work. Contains all the tools you need to

add or remove parts, peripherals and printed circuit boards. All packaged in deluxe

black vinyl zipper case (13” x 7-1/4” x 1-3/4”) folded size.

CONTENTS:1/4” nut driver • 3/16” nut driver #0 Phillips screwdriver

#1 Phillips screwdriver • 1/8” std. screwdriver

3/16” std. screwdriver • T-10 torx driver • T-15 torx driver • Mini long-nose plier

6” adjustable wrench • 4-3/4” long tweezer • 3-prong parts holder • 30W soldering iron •

Desolder pump • Rosin core solder • Brush Anti-static wrist strap • I.C. insertion tool •

I.C. extractor tool

7-1/4” 4-way crimper

PERSONAL COMPUTER TOOL KITA complete kit for servicing plus adding peripherals and printed circuit boards to your PC. In

addition to being heat treated, these tools are shot peened, making them extra tough so as to

avoid chipping and distortion.

The IC extractor, tweezer and retriever are fully insulated. Each tool handle is shaped for com-

fort while designed to give more power and extra torque.

The feature of the torx driver is its reversible bit having two sizes on a single handle: T-10 and

T-15.

THE KIT HAS:1/4” nut driver • 3/16” nut driver • 3-prong parts retriever/extractor

• 4-5/8” long assembly tweezer • T-10/T-15 reversible torx driver • 14-16 Pin I.C. Inserter

• #1 Phillips screwdriver, 6” overall • 3/16” slotted screwdriver, 6” overall

• Integrated circuit extractor • #0 Phillips screwdriver, 5-1/2” overall

1/8” slotted screwdriver, 5-1/2” overall

These tools are neatly secured in elastic straps enclosed in a compact, padded vinyl zipper

case.

No. CT225

5 PIECE CHASSIS PUNCH SET

No. 110EComplete set of punch-

es in a leatherette car-

rying case. All precision

machined of top grade

steel. Following sizes:

5/8”, 11/16”, 3/4”, 1”, 1-

3/16”, plus burring

reamer. (.47”)

IDC CRIMPING TOOL

No. HT214R - Replacement Crimping Block

This all-steel construction tool with cushioned handle grips provides

good short run production capabilities for all insulation displacement

connector assembling. Works for D-Sub and Centronics.

No. HT214

No. CT813

COAXIAL TOOL KITS

All the tools needed to cut, strip and install RG58, RG59, RG62 (Tool

Kit No. WS600) plus RG6 (Tool Kit No. WS604) and center pin in a

convenient storage and carrying case.

Tool KIt No. WS600 (for RG58, RG59 & RG62)

Includes:

(Fig. 1) No. WS28 (Ratchet Crimp Tool)

(Fig. 2) No. WS145 (Stripping Tool)

(Fig. 3) No. WS50 (Cable Cutter)

Tool KIt No. WS604 (for RG58, RG59, RG62 & RG6)

Includes:

(Fig. 1) No. WS36 (Ratchet Crimp Tool)

(Fig. 2) No. WS145 (Stripping Tool)

(Fig. 3) No. WS50 (Cable Cutter)

philmore pg. 209-224 catalog

Documents

aaa cell um

n cell um

snap coverscoin cell

bh2020coin cell holder

bh2025coin cell holder

bh2038coin cell holder

bh2032coin cell holder

standard snap connectionno