philmore pg. 33-48 catalog
DESCRIPTION
Philmore pg. 33-48 CatalogTRANSCRIPT
TERMINAL BLOCKS & BARRIER STRIPS
33
Part Number # Positions Length13-2502 2 10.16 mm13-2503 3 15.24 mm13-2504 4 20.32 mm13-2505 5 25.40 mm13-2506 6 30.48 mm13-2508 8 40.64 mm13-2510 10 50.80 mm13-2512 12 60.96 mm
Specifications:Rating: 15A @ 300V
UL Listed & CSA CertifiedCenter Spacing: .2” (5.08 mm)Wire Size: #12 - 22 AWGHousing Material: Type 6/6 Polyamide 94VOScrew Size: 3 mm X 5 mm Zinc Plated SteelOperating Temperature: 105oC (221oF) max.
-40oC (-40oF) min.
VERTICAL FEMALE DePLUGGABLE TERMINAL BLOCKS
These handy connectors are designed for quick and easy connection of wire to wire or wire to board configura-tions and are then unpluggable when needed and are equipped with a sturdy latch to prevent accidental discon-nect. The wire entry is through the right side of the connector or vertical (right angle) to the mating connector.
HORIZONTAL FEMALE DePLUGGABLE TERMINAL BLOCKS
These handy connectors are designed for quick and easy connection of wire to wire or wire to board configura-tions and are then unpluggable when needed and are equipped with a sturdy latch to prevent accidental disconnect.The wire entry is through the rear of the connector or horizontal (in line) to the mating connector.
Specifications:Rating: 15A @ 300V
UL Listed & CSA CertifiedCenter Spacing: .2” (5.08 mm)Wire Size: #12 - 22 AWGHousing Material: Type 6/6 Polyamide 94VOScrew Size: 3 mm X 5 mm Zinc Plated SteelOperating Temperature: 105oC (221oF) max.
-40oC (-40oF) min.
Part Number # Positions Length13-2602 2 10.16 mm13-2603 3 15.24 mm13-2604 4 20.32 mm13-2605 5 25.40 mm13-2606 6 30.48 mm13-2608 8 40.64 mm13-2610 10 50.80 mm13-2612 12 60.96 mm
EURO MAG TERMINAL BLOCKS
TERMINAL BLOCKS & BARRIER STRIPS
34
EURO MAG TERMINAL BLOCKSDePluggable Printed Circuit Mount Male Header Sockets
These sockets are available in both Vertical & Horizontal configurations and mate with the 13-2500 and 13-2600 series. Theyhave closed side bases and a mating latch to prevent accidental disconnection of the plugs.
Specifications:Rating: 15A @ 300V
UL Listed & CSA CertifiedCenter Spacing: .2” (5.08 mm)Contact Material: Tin Plated BrassHousing Material: Type 6/6 Polyamide 94VORecommended PC Hole size: .055” (1.40 mm)
use #55 drill bit Philmore # 12-552Operating Temperature: 105oC (221oF) max.
-40oC (-40oF) min.
Part Number # Positions Length13-2702 2 12.08 mm13-2703 3 17.16 mm13-2704 4 22.24 mm13-2705 5 27.32 mm13-2706 6 32.40 mm13-2708 8 42.56 mm13-2710 10 52.72 mm13-2712 12 62.88 mm
Part Number # Positions Length13-2802 2 12.08 mm13-2803 3 17.16 mm13-2804 4 22.24 mm13-2805 5 27.32 mm13-2806 6 32.40 mm13-2808 8 42.56 mm13-2810 10 52.72 mm13-2812 12 62.88 mm
Vertical Mount Horizontal Mount
Description:Base: With 1.2 - 2.5mm raised baseHousing Material: Polyamide 66 (Nylon 66), UL 94V-2Temperature Rating: 105oC (UL), -30oC to 110oC (VDE)Terminal Insert: Brass metal alloy, nickel platedScrew: Zinc plated
Horizontal
ModelClamping
AreaWire Range(Cu, AWG)
ScrewUnit A B C D E F
13-1208 2.5mm² 22-12Sol/Str M2.6x5
(mm)(inch)
96.203.79
17.000.67
14.500.57
8.000.32
2.900.11
2.8 ± 0.10.11
600V20 AMP
13-1210 4.0mm² 22-10 Sol14-10 Str M3.0x6
(mm)(inch)
117.54.63
20.200.80
17.000.67
10.000.39
3.600.14
3.4 ± 0.10.13
600V30 AMP
13-1216 6.0mm² 22-10Sol/Str M3.5x7
(mm)(inch)
140.75.40
23.800.94
19.000.75
12.000.47
3.900.15
4.2 ± 0.10.15
600V35 AMP
13-1232 10.0mm² 20-8Sol/Str M4.0x9
(mm)(inch)
158.06.22
25.601.01
25.200.99
13.500.53
4.400.17
5.0 ± 0.10.19
600V50 AMP
Dimensions (mm / inch)
EURO STYLE BARRIER STRIPThese Euro style barrier strips are available in several sizes depend-ing on your carry current needs. They are cutable to almost anydesired length. These terminal blocks are available in 20A, 30A, 35A,and 50A versions.
TERMINAL BLOCKS & BARRIER STRIPS
35
Part Number No. Poles “A” dim. “B” dim.13-1410 10 4.40” 4.12”13-1412 12 5.16” 4.88”13-1414 14 5.90” 5.62”13-1416 16 6.66” 6.38”13-1418 18 7.40” 7.12”13-1420 20 8.16” 7.88”13-1422 22 8.90” 8.62”
30 Amp Dual Row Terminal Blocks
Specifications:Rating: 30A, 300VCenter Spacing: .375” or 3/8” (9.52 mm)Wire Range: #14-22 AWG CUScrew Size: #6-32 philslot screwsTorque Rating: 9 in-lbDistance Between Barriers: .30” (7.62 mm)Mounting: #6 screwsOperating Temperature: 130oC (266oF) Max.
-40oC (-40oF) Min.Materials: Molded base: Black, UL rated 94VO thermoplasticTerminal plating: Tin over brass; Screws: Zinc plated steelBreakdown Voltage: 3600VAgency Information: UL/CSA; IEC Compliance; CE Certified
Part Number No. Poles “A” dim. “B” dim.13-1402 2 1.40” 1.12”13-1403 3 1.78” 1.50”13-1404 4 2.16” 1.88”13-1405 5 2.53” 2.25”13-1406 6 2.90” 2.62”13-1407 7 3.28” 3.00”13-1408 8 3.66” 3.38”13-1409 9 4.03” 3.75”
Heavy Duty 30 Amp Dual Row Terminal Blocks
Part Number No. Poles “A” dim. “B” dim.13-1502 2 1.63” 1.31”13-1503 3 2.07” 1.75”13-1504 4 2.51” 2.18”13-1505 5 2.94” 2.62”13-1506 6 3.38” 3.06”13-1507 7 3.82” 3.50”13-1508 8 4.25” 3.93”13-1509 9 4.69” 4.37”
Part Number No. Poles “A” dim. “B” dim.13-1510 10 5.13” 4.81”13-1512 12 6.00” 5.68”13-1514 14 6.87” 6.56”13-1516 16 7.75” 7.43”13-1518 18 8.62” 8.31”13-1520 20 9.50” 9.18”13-1522 22 10.37” 10.06”
Specifications:Rating: 30A, 300VCenter Spacing: .437” or 7/16” (9.52 mm)Wire Range: #12-22 AWG CUScrew Size: #6-32 philslot screwsTorque Rating: 9 in-lbDistance Between Barriers: .353” (8.97 mm)Mounting: #6 screwsOperating Temperature: 130oC (266oF) Max.
-40oC (-40oF) Min.Materials: Molded base: Black, UL rated 94VO thermoplasticTerminal plating: Tin over brass; Screws: Zinc plated steelBreakdown Voltage: 4800VAgency Information: UL/CSA; IEC Compliance; CE Certified
TERMINAL BLOCKS & BARRIER STRIPS
36
30 Amp Dual Row Terminal Blocks
Part Number No. Poles “A” dim. “B” dim.13-1602 2 2.13” 1.69”13-1603 3 2.69” 2.25”13-1604 4 3.25” 2.81”13-1605 5 3.81” 3.37”13-1606 6 4.37” 3.94”13-1607 7 4.94” 4.50”13-1608 8 5.50” 5.06”13-1609 9 6.06” 5.62”13-1610 10 6.62” 6.19”13-1612 12 7.75” 7.31”
Part Number No. Poles “A” dim. “B” dim.13-1702 2 2.51” 2.06”13-1703 3 3.20” 2.75”13-1704 4 3.89” 3.44”13-1705 5 4.58” 4.13”13-1706 6 5.26” 4.81”13-1707 7 5.95” 5.50”13-1708 8 6.64” 6.19”13-1709 9 7.33” 6.88”13-1710 10 8.01” 7.56”13-1712 12 9.39” 8.94”
75 Amp Dual RowTerminal Blocks
13-1400 Series
13-1450Single Flat Q.D. Tab .187”
13-1451Single 45o Q.D. Tab .187”
13-1452Dual Flat Q.D. Tab .187”
13-1453Dual 45o Q.D. Tab .187”
13-1455Slip-on Barrier Jumper
13-1500 Series
13-1550Single Flat Q.D. Tab .187”
13-1551Single 45o Q.D. Tab .187”
13-1552Dual Flat Q.D. Tab .187”
13-1553Dual 45o Q.D. Tab .187”
13-1555Slip-on Barrier Jumper
Barrier StripHardwareSpecifications:
Rating: 30A, 600VCenter Spacing: .562” or 9/16” (14.28 mm)Wire Range: #8-22 AWG CUScrew Size: #8-32 philslot screwsTorque Rating: #8 srews 16 in-lbDistance Between Barriers: .41” (10.5 mm)Mounting: #8 screwsOperating Temperature: 130oC (266oF) Max.
-40oC (-40oF) Min.Materials: Molded base: Black, UL rated 94VO thermoplasticTerminal plating: Tin over brass; Screws: Zinc plated steelBreakdown Voltage: 7500VAgency Information: UL/CSA; IEC Compliance; CE Certified
Specifications:Rating: 75A, 600VCenter Spacing: .687” or 11/16” (17.45 mm)Wire Range: #6-14 AWG CUScrew Size: #10-32 philslot screwsTorque Rating: 20 in-lbDistance Between Barriers: .56” (14.3 mm)Mounting: #10 screwsOperating Temperature: 130oC (266oF) Max.
-40oC (-40oF) Min.Materials: Molded base: Black, UL rated 94VO thermoplasticTerminal plating: Tin over brass; Screws: Zinc plated steelBreakdown Voltage: 7500VAgency Information: UL/CSA; IEC Compliance; CE Certified
POWER TAPS & SURGE PROTECTION
37
Superior Power Strips with Special Features & FULL Surge Protection
8 Outlets MAXIMUMProtection DSS Power Strip
This unit has itALL. Full AC Lineprotection, full tele-phone line protec-tion, and coax con-nector protection.
No. 43-9706
Features:6’ Power Cord6 AC Outlets2 Transformer Outlets3 Telco Jacks for Telephone
Modem or Video Box2 GOLD Satellite Coax Connectors2 GOLD TV Ports for Antenna or Cable2 Thermal FusesLighted SwitchIndicator lights for Surge Protection, Polarity,
& GroundBuzzerExternal Ground Screw for added Lightning protec-tionRMI / RFI Filtering
9 MOV’s (1350 joules) No. 43-9704
9 Outlet Surge Strip with Full ProtectionIf you need more outlets, Philmore has it. This power tap has 9 outlets,and three of them are designed for transformers. To make things moreattractive we have added higher joule ratings, and an audible buzzer thatlets you know when the surge strip has been tripped.
No. 43-9705
For those surfers that want to be protected,Philmore offers the Ultimate in surf protectionplus Telephone protection and two (2) outletsfor those AC adapters.
8 Outlet Internet SurgeStrip with Full Protection
Features:6 AC Outlets2 Transformer Spaced Outlets3 RJ11 (4c) Telco Jacks for Modem + Phone6’ Power Cord2 Thermal FusesLighted SwitchIndicator Lights for surge, polarity & ground60 joules protection Telephone LineEMI / RFI FilteringBuzzer
6 MOV’s (900 joules)
Features:6 AC Outlets3 Transformer spaced Outlets6’ Power Cord2 Thermal FusesLighted SwitchIndicator lights for Surge & GroundEMI / RFI FilteringBuzzer
3 MOV’s (450 joules)
Philmore has once again added the features mostpeople are looking for in a surge strip. We haveadded units with transformer spacing for those usingAC adaptors such as CD players and laptop comput-ers, higher joule ratings for longer life, jacks of specialpower strips with DSS hookups.
MINI EXTENSION CORD
A foot long of SJT18/3 cord with 3 prong plug on one end and receptacleon the other. Use with wall outlets or power strip, Use with AC wall trans-former & Power supplies to prevent blocking adjacent sockets.
No. 48-123
BEST 6 Outlet Surge Protection for AC Line, TV, & ComputerThis series of AC line protectors provides 3-mode protection againstsurges and spikes and these three units have additional circuitry for the protection of other paths of damaging surges. The PT06 is availablewith AC Line protection, and a telephone protection option and a TV / VCRprotection option.
No. PT06 AC Lines Protected
No. PT06V AC Lines + Coaxial TV / VCR No. PT06M AC Lines + Telephone, Modem, FAX
No. PTO6
No. PTO6M
No. PTO6V
Surge SpecificationsMax Dissipation: 120 joulesMax Voltage: 150 V RMSMax. Spike Current : 4500 AMax.lamping Voltage: 395V RMS
EMI / RFI SpecificationsProtection: Normal + Common Mod Freq. 500KHz-30MHzAttenuation: 10-35dB
POWER TAPS & SURGE PROTECTION
38
Power Taps with FULL Surge ProtectionFull surge protection has ALL AC lines protected with a (3) MOV’s
Power Taps with BASIC Surge ProtectionBasic surge protection has (1) MOV (metal oxide varister) wired from HOT to Neutral
Power taps add convenience and additional outlets to existing sockets.
6 Outlet Economy Power TapThis solidly constructed outlet strip is both UL and CUL listed and comes with a 3 ft. power cord, circuit breaker and switch combo.
No. 43-7060
6 Outlet Heavy DutyEconomy Power Strip
Economy 6 outlet strip with a heavy duty plastichousing and a 4 foot power cord. Separate On -Offswitch and circuit breaker. UL and CUL Listed.
No. 70-405
3 Outlet Economy Power Tap
This wall Tap lets the user maximize the useof the existing AC Receptacle by adding 2additional sockets. This unit can be used twoper AC receptacle. Ivory.
No. 43-333
6 Outlet Heavy Duty Economy Surge StripEconomy 6 outlet strip with a heavy duty plastic housing and a 4 foot power cord. Separate lighted On -Off switch and circuit breaker.
Features4’ Power CordLighted On-Off SwitchThermal Fuse(1) MOV 70 joules
Hot to NeutralPeak Amp Rating 4000EMI/RFI -5 - -40dB
No. 70-661
No. 43-335
Features. 3 MOV’s (210 joules)Surge Indicator LightGround Indicator light.
3 Outlet Wall Tap with Full SurgeThis unit has all 3 AC lines protected plus EMI / RFI filtering.It
also has ground and surge indicator lights.
Expander III Duplex Wall Tap with Full SurgeThe Expander III economical yet completeprotection for all sensitive electronic equip-ment. The 3 MOV’s protection featured in thisunit will provide worry-free protection. Unitfeatures LED indicator to show that protectioncircuits are functioning. This unit is ULapproved and rated at 15 amps, 125V AC(1875 watts)
No. 70-8030
6 Outlet Economy Surge StripThis solidly constructed outlet strip is both UL and CULlisted and comes with a 3 foot power cord, circuit break-er and switch combo.
Features3’ Power CordCircuit Breaker & Switch ComboSurge Indicator Light(1) MOV 70 joules Hot to Neutral
No. 43-7061
No. 70-6000 6’ cordNo. 43-6015 15’ cord
Metal 6 Outlet Power TapDurable metal housing construction. Separate
lighted On-Off switch and 15 Amp circuit breakerwith a 6 or 15 foot cord.
Expander I Duplex 6 Outlet Tap
This economical and convenient 6 positionAC power tap plugs into a standard AC duplex outlet. A center screw is provided toinsure unit holds securely to duplex outlet. This Unit is UL Listed and rated 15A @125V AC (1875 watts)
No. 70-8000
POWER TAPS & SURGE PROTECTION
39
Full surge protection has ALL AC lines protected with (3) MOV’s
6 Outlet Heavy DutySurge Strip
This 6 outlet strip is constructed with a heavy dutyplastic housing and a 4’or 15’power cord. Separatelighted On-Off switch and circuit breaker and 3MOV’s (210 joules), and EMI/RFI filtering.
No. 70-406 4’ Power CordNo. 43-6415 15’ Power Cord No. 43-1205 Surge Cube
Features:210 JoulesEMI / RFI FilteringALL lines ProtectedClamping Voltage 330 VLED Surge Indicator Light
Single Outlet With FullSurge + Noise Filtering
This compact single outlet surge protector iscompact enough that two can be placed in asingle electrical outlet.
BEST Single Outlet Surge Protection for AC Line, TV, & ComputerThis series of AC line protectors provides 3-mode protection againstsurges and spikes and these three units have additional circuitry forthe protection of other paths of damaging surges. The small size isnot an indication of the power capacity, these are full power surge protectors and are single socket devices
Features:ALL AC Lines Protected210 joules protectionIndicator Lights for Surge and GroundEMI / RFI Filtering
No. PT07 AC Line Protection OnlyNo. PT07M AC Line Protection + Telephone, Modem , FAXNo. PT07V AC Line + Coax Protection for TV / VCR
No. 70-6030 6’ Power CordNo. 43-6615 15’ Power Cord
Metal 6 Outlet Surge StripDurable metal housing construction. SeparatedLighted On-Off switch, circuit breaker, 6 or 15’ powercord.
Features:6 or 15’ Power CordLighted Switch(2) Thermal Fuses(3) MOV’s 210 joulesALL AC Lines ProtectedEMI/ RFI Filter
Features4’ or 15’ Power CordLighted On-Off SwitchThermal Fuse(3) MOV’s 210 joulesAll AC Lines Protected
No. PTO7
No. PTO7M
No. PTO7V
220 VAC POWER TAPS
4 Outlet Economy Power Strip Two outlets with universal socket and other two outlets for two round pin or
flat pin plug. Bi-color rocker switch with green power indicator light on thehousing. Four foot power cord with standard US three prong plug that will fitinto the output socket of Philmore step up/step down transformer (ST-series)Maximum Rating 10A-250VAC
5 Outlet Deluxe Power Strip Universal socket on all five outlets. ON-OFF switch with power indicator on
all five outlets (control each outlet individually), and circuit breaker. Four footpower cord with standard US 3 prong plug that will fit into the output socketof Philmore step up/step down transformer (ST-series) Maximum Rating 15A-250VAC
No. 70-2204 No. 70-2205
HOME / OFFICE ACCESSORIES
40
DOUBLE COIL BUZZER
No. TW15 - Pair to Display Box
No. TW15E - Single to Display Box
SPECIFICATIONS:Power Source: 115V 120VFrequency: Channel A 200KHz, Channel B 230 KHz; or adjusted to cus-tomer’s specsModulation: FMPower Consumption: 3WFeaturing the latest in FM and Phased-Locked-Loop circuitry for crystal-clear communication and maintenance-free operation. The system allowsthree-station operation and can be expanded with add-on units. Absolutelyno installation is required; just plug into any AC outlet and use. The systemis ideally suited for private homes (as a remote, audio “babysitter”), offices,factories, restaurants, hospitals, stores and schools.FEATURES:• Wireless - absolutely no installation required. Just plug into any AC
outlet and talk• FM PLL (Phased-Locked-Loop) circuitry-gives you excellent and
noise-free conversation• 2-channel selector-for use up to 4 stations operation• Built-in “beep” call-for alerting other station• Built-in squelch control-automatically eliminates fluorescent light
static, appliance motor noise, dimmer switch buzzing, etc.• Built-in lock button-for continuous talking or baby-sitter monitoring• Attractive styling makes it suitable for any decor
Automatic voice activation puts the intercom in the transmit modewhen you start talking. Stop talking and it automatically switches tothe receiver mode. Allows”hands free” operation while talking. Ifyou prefer manual operation, touch the “call” or “talk” SENSORSWITCH. Revert back to “automatic” with a single touch. A built-insquelch system automatically eliminates electrical noises to trans-mit crisp, clear sound.No installation required - plug into any 110-120V AC outlet, turn seton and talk! A pleasing “BEEP” sound alerts listener at the otherend. Buy them individually or in pairs, and add as many as desired.
SPECIFICATIONS:CIRCUIT: FM, phase-locked-loopCHANNELS: 3AUDIO POWER: 350mWSIZE (Per Unit): 7”W x 4-3/4” x 2”H
This buzzer is ideal soundingdevice for use with No. PE31(above). Unit is connected to 12 Voutput terminals on back of No.PE31.
3-12 Volt DC6-12 Volt AC
No. PE296
PHOTO-ELECTRICINFRARED RELAY
SYSTEM
2-CHANNEL FM WIRELESS INTERCOM
VOICE-ACTIVATED FM INTERCOM for AUTOMATIC TWO-WAY CONVERSATIONS
OVER THREE CHANNELS
No. TW20 - Pair to a display boxNo. TW20E - Single to a display box
NORMAL - Power on when beam isbroken
REVERSE - Power off when beam isbroken
No bulbs to replace - it doesn’t use any.Long life LED provides the pulsedinfrared beam.Supplied with universal mounting brack-ets to allow installation on walls, floors,ceiling, flush mount and high efficiencyreflector. A built-in LED monitor lampdenotes perfect alignment between theunit and the reflector furnished.
No. PE31SPECIFICATIONS:
Power Requirement:Standby Power
Consumption:Usable Range:
Reaction Time :Release Time:
AC Switched Load:
DC Output:
Dry Contact Capacity:
Maximum AngularReflector Error:
Operating TemperatureRange:
Light Source:
Detector:Reflector:
Fuse:Dimensions:
Weight:
120 Volts AC, 50/60 Hz
10 Watts2-1/2 ft. min to 50 ft. Max.Less than 50 millisecondApprox. 5 seconds in “INTER-MITTENT” mode120 Volts AC, 3 amps max.(noninductive load)12 Volts DC, 1 amp max. (12ohm min load)30 Volts DC, 3 amps, or 120Volts AC, 3 amps
+ 10º
15ºF (-10ºC) to 105ºF (40ºC)Pulse modulated infraredLight Emitting DiodeInfrared sensitive photodiodesHigh-efficiency, multi-facedplastic 2-3/8” by 4-3/4”1amp. AGC (3AG)4-3/4” (120mm) x 5-7/8”(150mm) x 6” (157mm)2.8 lbs (1.3kg)
Invisible pulse beam effectiveup to 50 feet--not affected byoutside lighting changes
Unlike most other one-piece relay systems,this unit is capable of:
1. Tying in directly to any burglar alarm system.
2. Operating 12 volt DC devices (such as sirens, bells, counters) up to 1 amp current.
3. Operating 120 volt AC devices drawing up to 3 amps.
Six modes of operation are ready selected byslide switches on the rear panel:
1. LOCK - Stays on until reset.2. INSTANT - Actuates only when beam is
intercepted.3. INTERMITTENT - Actuates for five
seconds after beam is broken.PLUS NORMAL and REVERSE on any of theabove:
PERSONAL SECURITY DEVICES
41
Recordable Motion Detector with External DC Power Jack
This entry alarm allows user to playrecorded message upon sensor interrup-tion. Recordable message length is about6 seconds. Detection area up to a distanceof 20 feet with a radius of 100 degrees.Supplied with mounting bracket that allows120 degrees swivel adjustment. Poweredby (4) AA batteries (not included). Externaljack: 6V 600mA regulated DC adaptor (notincluded) or 3-4.5V 500mA non-regulatedDC adaptor (not included).
No. PV1000
Electronic DOOR KNOB ALARMHang the unit on a door knob and give ita half-minute to “look” at its surround-ings. After that, it will sense anyonetouching the knob and sound a loudalarm. Use while traveling or monitorunwanted door opening. The alarm willoperate for days on a nine volt transistorbattery. Note that it works best on wooddoors with metal knobs (practically anydoor) but may not perform as well on ametal (steel) door.
No. PV500
Infrared Automatic SENSOR LAMP
When you enter a darkened room where this device is located, it turns on its own light. Use in acloset, spare room, outdoor shed, garage etc. batteries can last for months. No wiring is neces-sary, the unit runs on four AA batteries (or, an AC adaptor such as Philmore No. BE226). Batteriesare not supplied with the unit.
No. PV2000
PERSONAL ALARMIt looks like a computer mouse, butis a very loud personal alarm thatmay be carried by a jogger, night-shift worker or just someone thatmight be threatened getting acrossthe parking lot. If the loud sounddoes not frighten off an assailant, itwill at least attract plenty of attention.A bonus feature is a “penlight” flash-light that may be used to locate alock, foot path etc. Operates on twoAAA batteries, which are included.
No. SH999
Volume Control Entry Chime withExternal DC Power Jack
This entry alarm allows user to select volumeof entry chime upon sensor interruption.Detection area up to a distance of 15 feet witha radius of 100º. Supplied with mounting brack-et that allows 120º swivel adjustment.Powered by (4) AA batteries (not included).External jack: 6V 600mA regulated DC adaptor(not included) or 3-4.5V 500mA non-regulatedDC adaptor (not included).
No. SH588A
Electronic WINDOW or DOOR ALARMThis is probably the fastest and leastcostly way to protect a window or doorfrom an intruder. Attach the magnet tothe window and the sounder module tothe window frame. Both attach easilywith double stick foam tape. Whenyou have the unit switched “ON”, it willsound if the window is opened, evenjust a couple of inches. The alarm canmonitor a window or door for monthson one set of batteries (unless thealarm sounds a lot, which takes moreenergy.) The LR44 batteries areincluded and replacements are easilyavailable.
No. SH555
Magnetic DOOR ANNUNCIATORProvides an electronic “ding-dong”to announce someone entering adoor. This may be the least expen-sive door annunciator, and themost easily installed. Attach themagnet to your door and soundingdevice to the door frame (or viceversa), if you like. Double stickyfoam tape makes mounting quickwork. A sophisticated soundannounces the entry of a customereach time the door is opened.
No.SH333
VIDEO ADAPTOR SYSTEM
42
# 999 CONNECTOR ADAPTOR KIT
Never be without the right adaptor. This kit allows userto make up any combination of TNC, UHF, Mini-UHF,SMA, BNC, “N” TYPE, “F” and RCA adaptor. 136 adap-tor combinations possible.
.GOLD PLATED BODY
.GOLD PLATED CONTACTS
.TEFLON INSULATION
KIT INCLUDES 2 EACH MALE AND FEMALE FIT-TINGS AND 8 ADAPTOR FITTINGS. TOTAL 40 Pcs.
THE FOLLOWING ADAPTOR COMBINATIONS CAN BE MADE FROM No. 999 KIT
N Male to N Male (1)N Male to N Female (2)N Male to UHF Male (2)N Male to UHF Female (2)N Male to Mini UHF Male (2)N Male to Mini UHF Female (2)N Male to SMA Male (2)N Male to SMA Female (2)N Male to TNC MALE (2)N Male to TNC Female (2)N Male to BNC Male (2)N Male to BNC Female (2)N male to F Male (2)N Male to F Female (2)N Male to RCA Male (2)N Male to RCA Female (2)UHF Male to UHF Male (2)UHF Male to UHF Female (2)UHF Male to N Female (2)UHF Male to Mini UHF Male (2)UHF Male to Mini UHF Female (2)UHF Male to N Male (2)UHF Male to SMA Male (2)UHF Male to SMA Female (2)UHF Male to TNC Male (2)UHF Male to TNC Female (2)UHF Male to BNC Male (2)UHF Male to BNC Female (2)UHF Male to F Male (2)UHF Male to F Female (2)UHF Male to RCA Male (2)UHF Male to RCA Female (2)Mini UHF Male/Mini UHF Male (1)Mini UHF Male/Mini UHF Female (2)Mini UHF Male to SMA Male (2)
Mini UHF Male/SMA Female (2)Mini UHF Male to TNC Male (2)Mini UHF Male/TNC Female (2)Mini UHF Male to BNC Male (2)Mini UHF Male/BNC Female (2)Mini UHF Male to F Male (2)Mini UHF Male to F Female (2)Mini UHF Male to RCA Male (2)Mini UHF Male/RCA Female (2)Mini UHF Male to N Female (2)Mini UHF Male/UHF Female (2)SMA Male to SMA Male (1)SMA Male to SMA Female (2)SMA Male to TNC Male (2)SMA Male to TNC Female (2)SMA Male to BNC Male (2)SMA Male to BNC Female (2)SMA Male to F Male (2)SMA Male to F Female (2)SMA Male to RCA Male (2)SMA Male to RCA Female (2)SMA Male to N Female (2)SMA Male to UHF Female (2)SMA Male/Mini UHF Female (2)TNC Male to TNC Male (1)TNC Male to TNC Female (2)TNC Male to BNC Male (2)TNC Male to BNC Female (2)TNC Male to F Male (2)TNC Male to F Female (2)TNC Male to RCA Male (2)TNC Male to RCA Female (2)TNC Male to N Female (2)TNC Male to UHF Female (2)TNC Male/Mini UHF Female (2)TNC Male to SMA Female (2)BNC Male to BNC Male (1)
BNC Male to BNC Female (2)BNC Male to F Male (2)BNC Male to F Female (2)BNC Male to RCA Male (2)BNC Male to RCA Female (2)BNC Male to N Female (2)BNC Male to UHF Female (2)BNC Male/Mini UHF Female (2)BNC Male to SMA Female (2)BNC Male to TNC Female (2)F Male to F Male (1)F Male to F Female (2)F Male to RCA Male (2)F Male to RCA Female (2)F Male to N Female (2)F Male to UHF Female (2)F Male/Mini UHF Female (2)F Male to SMA Female (2)F Male to TNC Female (2)F Male to BNC Female (2)RCA Male to RCA Male (1)RCA Male to RCA Female (2)RCA Male to N Female (2)RCA Male to UHF Female (2)RCA Male/Mini UHF Female (2)RCA Male to SMA Female (2)RCA Male to TNC Female (2)RCA Male to BNC Female (2)RCA Male to F Female (2)N Female to N Female (1)N Female to UHF Female (2)N Female/Mini UHF Female (2)N Female to SMA Female (2)N Female to TNC Female (2)N Female to BNC Female (2)N Female to F Female (2)N Female to RCA Female (2)
UHF Female to UHF Female (1)UHF Female/Mini UHF Female (2)UHF Female to SMA Female (2)UHF Female to TNC Female (2)UHF Female to BNC Female (2)UHF Female to F Female (2)UHF Female/RCA Female (2)Mini UHF Female/Mini UHF Female (1)Mini UHF Female/SMA Female (2)Mini UHF Female/TNC Female (2)Mini UHF Female/BNC Female (2)Mini UHF Female/F Female (2)Mini UHF Female/RCA Female (2)SMA Female to SMA Female (1)SMA Female to TNC Female (2)SMA Female to BNC Female (2)SMA Female to F Female (2)SMA Female to RCA Female (2)TNC Female to TNC Female (1)TNC Female to BNC Female (2)TNC Female to F Female (2)TNC Female to RCA Female (2)BNC Female to BNC Female (1)BNC Female to F Female (2)BNC Female to RCA Female (2)F Female to F Female (1)F Female to RCA Female (2)RCA Female to RCA Female (1)
For complete kit in zipper carrying case - Order NO.999For individual replacement parts for kit order as follows:
Part No. Description
999-5 N MALE999-10 N FEMALE999-15 UHF MALE999-20 UHF FEMALE999-25 Mini - UHF MALE999-30 Mini - UHF FEMALE
Part No. Description
999-35 SMA MALE999-40 SMA FEMALE999-45 TNC MALE999-50 TNC FEMALE999-55 BNC MALE999-60 BNC FEMALE
Part No. Description
999-65 F MALE999-70 F FEMALE999-75 RCA MALE999-80 RCA FEMALE999-85 COUPLER
Also available - 18” adaptor cable with 999 coupler on each endRG59/U CABLE - ORDER No. 999-90RG58/U CABLE - ORDER No. 999-95
“F” CONNECTORS
CRIMP-TYPE “F” CONNECTOR1/4” Crimping ring
Wire Type Plating Part No.RG59/U Tin FC65RG59/U Gold FC65GRG59/U Tin FC65-50*RG6/U Tin FC56RG6/U Tin FC56-50*
*asterisk items are 50 piece display pack.
43
Crimp Rings 1/4” Rings for above Connectors.
For Connector Crimp Ring Part No.No. FC65 No. R65BNo. FC56 No. R56BOrder rings in increments of 100,
bulk packed.
CRIMP-TYPE“F” CONNECTORAttached Ring.
Wire Type Part No.RG59/U FC65ARG59/U FC65A-50*RG6/U FC56ARG6/U FC56A-50*
* asterisk items are 50 piece display pack.
FOIL SHIELDCRIMP-ON “F” CONNECTORSSuitable for all wiresbut a longer crimping ferrule is meant especially for cables with a foil type shield.
Wire Type Part No.RG59/U FC57RG6/U FC57A
RG6 Teflon/Plenum FC86RG6/U Quad Shield FC8850-pack of FC57 FC57-5050-pack of FC57A FC57A-50
RG11/U FC11
DIRECT CRIMP “F”CONNECTORFastest to install F-connector with integralcrimping ring.
Wire type Part No.RG59/U FC79RG6/U FC79ARG58/U FC81
push-on for RG59 FC83
“F”-TypeGROUNDBLOCK
In line ground withfemales on eachend and ground connecting screw.
No. FC55
SOLDERLESSTWIST-ON “F” CONNECTORS
Wire type Plating Part No.RG59/U Gold Plated FCG59CRG6/U nickel plated FC59ARG6/U 50-pack of above FC59A-50RG6/U Gold Plated FCG59ARG59/U Nickel plated FC59CRG59/U 50-pack of above FC59C-50RG59 for Belden 8281 FC59NRG6/QUAD for quad shield FC59Q
TWIST-ON PUSH-ON “F”CONNECTORFor RG59/U cable.
Female “F” TERMINATOR75 ohms; to eliminatereflections.
No. FC2 - half watt terminator
DUAL “F”GROUNDBLOCKfor two lines,females oneach end,with mount-ing screws. No. FC25
Push-OnMale “F” forRG59/Uwith separate 1/4”crimping ring.
Note: Unless otherwise stated, all itemsare Nickel Plated
WeatherProof “F”Connector forRG6/UOne piece, High Quality “F” Connector. Brass and Cadmium Plated.No. FCW6 - With rubber “O” ringNo. FCW6A - With rubber “O” ring and silicone gel for maximum protection against harsh environments.
10 Pack “F” CONNECTORSCommon crimp type and twist-on type “F” connectors for both RG59/U and RG6/U. Both are packaged in an attractive spacesaving blister card (2-7/8” x 3-3/4”). Blister cards are printed with a full description and clear terminating instructions on back of card.
Crimp Type with attached ring
Twist-on type Crimp type with1/4” crimping ring
Weather proof Crimp typewith attached ring
Female coupler
Part NumberNo. 48-800 No. 48-805No. 48-810No. 48-815 No. 48-820 No. 48-850
Wire TypeRG59/URG6/U
RG59/URG6/U
RG59/URG6/U
DescriptionCrimp type with 1/2” attached ringCrimp type with 1/2” attached ring
Twist-on type with long barrelTwist-on type with long barrel
Crimp type with 1/4” crimping ringCrimp type with 1/4” crimping ring
Part NumberNo. 48-830No. 48-825 No. 48-855 No. 48-840No. 48-845No. 48-860
Wire TypeRG6/U
RG59/URG6/U
RG59/URG59/U
DescriptionCrimp type - weather proof
Crimp type with attached crimping ringCrimp type with attached crimping ring
Gold plated twist-on typeGold plated crimp type w 1/4” crimping ring“F” female coupler (F-81) with nut & washer
Foil ShieldCrimp-On “F”ConnectorsWider Hex, for easy installationsBrass material, Nickel plated
Wire Type Part No.RG59/U FCD57RG6/U FCD57A
No. FC80
No. FC58A
“F” CONNECTORS
For the perfect hex crimp every time. The PRO-Crimp“F” connectors have a machined hex crimp barrel sur-face that will provide a professional looking crimpevery time used. Use of the Philmore No. WS29 crimptool is recommended, but any hex crimp tool with adiameter of 0.358” will accomplish the task. ThesePRO-Crimp “F’ connectors havethe added bonus of an internal“O” ring to keep out the effects ofharsh environment without theneed of the messy gel found inother weather proof connectors.The PRO-Crimp “F” connectorsfeature a wider hex ring for asmoother look and ease of con-nection, to the point of being ableto use a hex wrench for tighten-ing. The PRO-Crimp “F” connectors are available with nickel or gold platefinishes and in sizes for RG59/U, RG6/U and RG6/U quad shield cables.
These connectors are available in bulk, just add the letter “B” to theend of the part number.
Note: We recommend using the Philmore No. WS29 crimp tool forthese connectors. This crimp tool will also crimp RG11/U (0.476” hex)and RG59/U - RG6/U (0.358” hex).
The PRO-Crimp “F”Environment Rubber SealThis 3/8” wide rubber seal will protect thePRO-Crimp “F” connectors from harsh envi-ronment when placed over the screw-onconnection point of the “F” connector andjack. Just slip over the jack and connect thecable plug in the normal manner. The sealwill then cover the connection point, insulat-ing from outside environments.
PRO-CRIMP “F” CONNECTORS
PartNumberNo. FC759 No. FCG759No. FC756No. FCG756 No. FC766 No. FCG766
No. FC700 - 4 Pcs./Pkg
Qty. / Pkg.
444444
Plating/Finish
NickelGold
NickelGold
NickelGold
Wire Size/Type
RG59/URG59/URG6/URG6/U
RG6/U Quad ShieldRG6/U Quad Shield
.476”12.08mm
.358”9.10mm
Makes a perfect hex in “F” type and BNC connec-tors. Works for all Philmore PRO-Crimp “F” con-nectors, RG6/U Quad Shield, and RG11/U.
No. WS29 - Crimps RG59/U, RG6/U and RG11/U
Tension Adjustment
PROFESSIONAL HEX CRIMPING TOOLwith
TENSION ADJUSTMENTfor large O.D. Cable
COMPRESSION CONNECTOR TOOL
This tool is especially designed for installation of “F” style com-pression connectors. It works with the Philmore FC306, FC346, &FC359 as well as the LRC, Augat, T&B, Paladin, AIM and othercompatible connectors.
No. 63-508
44
ADJUSTABLE PROFESSIONALCOMPRESSION CONNECTOR TOOL
No. 63-510 Professional Compression Tool for “F” & BNCNo. 63-512 Professional Compression Tool for “F”, BNC, & RCA
FeaturesHeavy-duty Steel ConstructionHand adjustment for different
length connectorsWorks with: Augat, T&B Snap-N-Sealtm, Paladin
SealTite, and AIM CATV F weatherproof connectors
T-TOOLEasy assembly of screw-on or regular “F”connectors. Greatfinger saver for assembly of twist-on or regular crimp-on “F”connectors. Just assemble “F” connector by threading on toT-TOOL, then assemble connector.
No. WS70
COMPRESSION TYPE CONNECTORS
45
Compression RCA (M) ConnectorsRCA male connectors for Home Theatre, Digital Audio and Car
Stereo applications. They work with the Philmore No.63-508 or 63-510tool. The compression connector is a tough weather-tite connectionthat is easy for the consumer or installer to use. They are color codedfor easy identification.
Part Number 45-1359RD RCA (M) for RG59, Red Insulator45-1359YL RCA (M) for RG59, Yellow Insulator45-1359WH RCA (M) for RG59, White Insulator45-1306RD RCA (M) for RG6, Red Insulator45-1306YL RCA (M) for RG6, Yellow Insulator45-1306WH RCA (M) for RG6, White Insulator45-1364RD RCA (M) for RG6 Quad, Red Insulator45-1364YL RCA (M) for RG6 Quad, Yellow insulator45-1364WH RCA (M) for RG6 Quad, White Insulator
Rt. Angle Compression RCA (M) ConnectorsThese RCA male connectors are great for Home Theatre, Digital
Audio and Car Stereo applications. They work with the PhilmoreNo.63-508 or 63-510 tool. The compression connector is a toughweather-tite connection that is easy for the consumer or installer touse. They are color coded for easy identification.
Part Number 45-3507RD Rt. Angle RCA (M) for RG59, Red Insulator45-3507YL Rt. Angle RCA (M) for RG59, YellowInsulator45-3507WH Rt. Angle RCA (M) for RG59, White Insulator45-3607RD Rt. Angle RCA (M) for RG6, Red Insulator45-3607YL Rt. Angle RCA (M) for RG6, YellowInsulator45-3607WH Rt. Angle RCA (M) for RG6, WhiteInsulator
Compression In-line RCA (F) ConnectorThese RCA female connectors are great for Home Theatre, Digital
Audio and Car Stereo applications. They work with the PhilmoreNo.63-508 or 63-510 tool. The compression connector is a toughweather-tite connection that is easy for the consumer or installer touse. They are color coded for easy identification.
Part Number 45-2107RD RCA (F) for RG59, Red Insulator45-2107YL RCA (F) for RG59, Yellow Insulator45-2107WH RCA (F) for RG59, White Insulator45-2607RD RCA (F) for RG6, Red Insulator45-2607YL RCA (F) for RG6, Yellow Insulator45-2607WH RCA (F) for RG6, White Insulator
Compression BNC (M) Connector
These BNC male connectors are great for Home Theater, and commercial videoapplications. They work with the Philmore No.63-508 or 63-510 tool. The compres-sion connector is a tough weather-tite connection that is easy for the consumer orinstaller to use.
45-980 BNC (M) for RG5945-979 BNC (M) for RG5845-992 BNC (M) for RG645-994 BNC (M) for RG6 Quad
Rt.Angle Compression BNC (M) Connector These BNC male connectors are great for Home Theater, and commercial video appli-
cations. They work with the Philmore No.63-508 or 63-510 tool. The compression con-nector is a tough weather-tite connection that is easy for the consumer or installer touse.
45-3959 Rt. Angle BNC (M) for RG5945-3906 Rt. Angle BNC (M) for RG6
Compression BNC (F)These BNC male connectors are great for Home Theater,
and commercial video applications. They work with thePhilmore No.63-508 or 63-510 tool. The compression con-nector is a tough weather-tite connection that is easy forthe consumer or installer to use.
45-2944 BNC (F) RG5945-2945 BNC (F) RG6
Rt. Angle Compression “F” (M)These “F” male connectors are great for Home Theater, Digital
Audio and Car Stereo applications. They work with the PhilmoreNo.63-508 or 63-510 tool. The compression connector is a toughweather-tite connection that is easy for the consumer or installerto use.
45-5759 “F” male RG5945-5706 “F” male RG6
Compression In-line “F”(F)These “F” female connectors are great for Home
Theater, Digital Audio and Car Stereo applications.They work with the Philmore No.63-508 or 63-510 tool.The compression connector is a tough weather-titeconnection that is easy for the consumer or installer touse.
45-6759 “F” (F) for RG5945-6706 “F” (F) for RG645-6764 “F” (F) for RG6 Quad
COMPRESSION “F” (M) CONNECTORThese commercial grade snap-and-seal connectors are great for CableCompanies, Commercial Broadcast Networks,as well as Residential application where ahigh-reliability connector is needed. They areconstructed of Tin Plated Brass and are fullyweather sealed.
No. FC359 - RG59 Coaxial Cable (4 pack)No. FC306 - RG6 Coaxial Cable (4 pack) No. FC346 - RG6 Quad Shield Cable (4 pack)
F-Type Chassis JackMounts in a 3/8”
dia. hole in panels up to 1/4” thick.
Center solder lug.
No. FC66
“F” TYPE RF ADAPTORS & JACKS
46
F-Female to UHF Male
No. FC71
F-Female to Female (F-81)May be panel mounted or used in line.Mounts in 3/8” hole in panelsup to 1/8” thickness withwasher and nut.
No. FC67 - Adaptor, Nickel PlatedNo. 42-1081 - 1” long Adaptor, Nickel platedNo. 42-2000 - 2 GHz (White Insulation)No. 48-860 - Ten Pack of FC67No. FCG67 - Adaptor, Gold Plated No. 42-1081G-1” long Adaptor, Nickel plated
BNC Male to F Female
No. 960
BNC Female to F Female
No. 978
N Male to F Female
No. 717
N Female to F Male
No. 718
Pal Male to “F” Female No. FP100
Pal Female to “F”Female No. FP400
Pal Male to “F” Male No. FP200
Pal Female to “F” Male No. FP300
PAL EUROPEAN to “F” ADAPTORS
F-Female to RCA Female
No. FC74
UHF Female to F-Male
No. FC68
F-Male to Male
No. FC73
F-Female to FemaleIntended for inlineusage to mate twomale “F” type connec-tors.
No. FC64
PCB Mount F-FemalePrinted circuitboard mounting.
No. FC54
F-Female to RCA FemaleWith hardware for panel mounting in3/8” hole, or useinline.
No. FC75 - Standard Nickel PlatedNo. FCG75 - Gold Plated, Yellow insulation
“F” Push-On AdaptorFemale “F”connector to malepush-on “F”. Rapidconnect/disconnect
No. FC62 - Nickel PlatedNo. FC62-6 - Six Pack of FC62No. FCG62 - Gold Plated
F-Type Push-On Right AngleAdaptor
F-female to malepush-on.
No. FC70
F-Type Right Angle AdaptorMale to female.
No. FC61
BNC Female to F Male
No. 958
BNC Female to F Push-on Male
No. 966
F-Male To RCA Female
Push-on type F-maleNo. FC82
F-Male to RCA FemaleNickel Plated
No. FC63
Gold PlatedNo. FCG63
1/8” Phone Plug Male to F Female
No. FC72
F-Female to RCA MaleNickel PlatedNo. FC69
Gold PlatedNo. FCG69
Note: Unless otherwise stated, all items are Nickel Plated Brass with Delrin Insulators
Note: All connectors on this page available in bulk--add (B) suffix when ordering
BNC CONNECTORS
47
BNC MALE, 2-Piecewith fixed center pin. Nickel plated body, delrin insulator, gold plated center pin
(Display pack of 1; for bulk add a “B” suffix, e.g. 920B)
One-Piece, Crimp TypeBNC Male with Insulating Boot.Separate center pin.Quick andweather tight.Nickel plated Brass,gold plated center pin.
BNC MALE RIGHT ANGLECrimp-on Two-piece connector forRG59/U and RG62/U cables.
No. 980RA
BNC Center Contact Pins.Bulk packed only.
BNC Crimping RingsBulk packed only.
This series of rings are all 1/2” in length.
BNC MALE, one-piecewith separate pin.Nickel plated body, delrin insulator, gold plated center pin.Packed 1 per blister; add “B” suffix for bulk packaging.
Right Angle, BNC MALEHandy in tightplaces.Conductorsattach via screwconnections.Forcoax under .275”Such as RG58, 59, 62, 6
UG-88/U SCREW-CLAMP STYLEBNC MALE CONNECTOR
No. 954NP - For RG58/Unickel plate, Delrin insulatorNo. 961NP - For RG59/UNickel Plated, Delrin InsulatorNo. 975 - For RG6/U
For commerical RG6/U cable such asBelden type 9290 (dual braid, commercialtype) etc. For cables with O.D. .275” to.290”
BNC MALE, 3-Piecewith separatepin.Nickel plated body,delrin insulator, goldplated pins.
Wire Type
RG59 & 62PVC JacketRG59 & 62
Teflon Jacket
RG58/U
RG6/U
Wire Type
RG58/U
RG59/U
RG6/U (.275 O. D.)
Wire Type
RG58/U
RG59/U
RG6
RG58/A
RG59 20 Ga.
Wire Type
RG58
RG59
RG6
Wire Type
RG59/U&RG62/U
RG58/U
Wire Type
RG58/UPVC
RG58/U
RG58A/U
RG58Teflon
RG62 &RG59/U
PVC
RG62RG59/U
RG59/U withTelflon
RG59/U with20 ga. pin
RG6/U(.275” O.D.)
RG6/U(.275” O.D.)
RG8X &mini 8
RG174,179, 187,188 & 316
PackageQuantity
One Per
Display TenPack
One Per
One Per
One Per
Display TenPack
One Per
One Per
One Per
Display TenPack
One Per
One Per
Part Number
974
974-10
996
997
973
973-10
998
994
989
989-10
926
927
Part Number
980
920
979
929
Part Number
964
969NP
988
Part Number
938
937
Part Number
RG58-PIN
RG59-PIN
RG6-PIN
RG58A-PIN
RG59L-PIN
Part Number
RG58-RING
RG59-RING
RG6-RING
NOTE: All connectors on this page are available in bulk. Add “B” to part no. when ordering.
NOTE: Unless otherwise stated, all items are Nickel Plated Brass with Delrin Insulators.
No. 967
BNC ADAPTORS & CONNECTORS
48
FEMALE BNC CONNECTORSPCB Mount/Panel Mount BNC Female
No. 939
BNC “T”AdaptorMale to 2 Female
No. 956NP
IN-LINE FEMALE BNC Screw ClampMounting.
No. 946 - for RG59/U, RG62/U cableNo. 945 - for RG55/U, RG58/U cable
IN-LINE BNC FEMALE 3-Piece Crimp Type
No. 944 - for RG59/U, RG62/U cableNo. 943 - for RG55/U, RG58/U cable
BNC CHASSIS MOUNTFEMALE
No. 952NP - Nickel plated, Delrin InsulatorNo. 952NP-10 - 10- Pack of No. 952NP
BNC FEMALEIsolated ChassisMountNo. 952RNP “Isolated” chassis mount connector.Mounting hole: 3/8”
BNC FEMALE Chassis MountSquare flange mount,with mounting holes on1/2” centers.No. 948 - UG290 type, Silver plated,Teflon Insulator. Mounting holes tapped 3-56No. 949 - Same as above but 1/8” mount-ing holes
Chassis Mount FEMALE CRIMPCONNECTION
No. 936 - for RG59/U, RG62/UNo. 935 - for RG55/U, RG58/U
BNC DUAL FEMALE Chassis Mount
No. 970 -Smaller version .47 bushing, not flat-ted. Length: 1-11/32” Teflon insulator,Silver platedNo. 970A - Similar to No. 970, butNickel plated and Delrin insulatorNo. 970A-10 - Display 10-Pack
of No. 970A
The following are 10-Packs of theabove connectors in Display Packaging:
No. 982-10 - 10-Pack of 982No. 983-10 - 10 Pack of 983No. 991-10 - 10 Pack of 991BNC Male Twist-onConnectors, For Teflon WiresFixed PinWire TypeNo. 993 - RG58/U - Teflon CablesNo. 995 - RG59/U, RG62/U -
Teflon Cables
BNC FEMALE BULKHEADCONNECTORS
BNC TWIST-ONCONNECTORS
BNC Female Both Ends75 ohm
No. 959NP
BNC Dual Males
No. 976
BNC Male to RJ11 & Screw Terminals
No. 70-5002
BNC Female to RJ11 &Screw Terminals
No. 70-5004
BNC Terminator with Chain (.5W)No. 931 - 75 ohmsNo. 931L - 50 ohmsNo. 931C - 93 ohms
BNC TerminatorBNC Male, 0.5 Watts. Color Coded
No. 971 - 75 ohmsNo. 971L - 50 ohmsNo. 971C - 93 ohms
Male, fixed pin
Male, separate pin
Male, right angle
Female, in-line
Female, chassis Mnt.
RG58/U
No. 991
No.991RA
No. 977
No. 940
RG62/URG59/U
No. 982
No.982RA
No. 984
No. 941
RG6/U
No. 983
No.983RA
No. 985
No. 942
Belden8281
No.987
No.986
Note: Unless otherwise stated, all itemsare Nickel Plated Brass with DelrinInsulators
NOTE: All connectors on this page are available in bulk. Add “B” to part no. when ordering.
BNC “T” 3 Males
No. 930
BNC Male to Female RightAngle Adaptor
No. 953NP
BNC “T” Adaptor3 Females
No. 981 - Silver Plated, Teflon InsulatorNo. 981NP - Nickel Plated, Delrin Insulator