planetary gearbox - rometec · 3 double-lipped radial shaft seals made of viton allow continuous...
TRANSCRIPT
Planetary GearboxStöber Series P
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
2
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
3
Double-lipped radial shaft
seals made of VITON allow
continuous operation and
have a very good chemical resistance.
High linear stiffness charac-
teristic, minimal torsional backlash and an extremely
low level of operational noise
are all achieved by optimised
helical gears.
Single piece ductile iron
housing with two bearings,
provides greater concen-tricity and more precise
alignment.
Ring gear directly machined
in the housing which is cast
from high tensile ductile iron.
The motor mounting system
with flange and adapter
bushing allows installation of
motor in minutes - no special
tools required.
Oversized bearings ensure a high load factor together
with axial and radial rigidity
of the output shaft.
Input shaft bearing with
seals and high temperature
grease.
Single part planet carrier
made of high-rigidity ma-
terial with a minimum ten-sile strength of 500N/mm².
Highest torsional rigidtity
due to generous dimensions.
Each piece is balanced toprovide smooth and uniform
running.
Adapter bushings fit all
motor shafts - no key re-quired.
Sun gears and planetary
gears case-hardened to
61 HRC and ground. Highquality gearing.
Balanced, low inertia alu-
minium clamp ring to mini-mise high speed vibration.
The planetary gears have bearings on both sides. This
minimises the deflection re-
sulting from axial and radial
forces.
Triple-split steel collet for
precise clamping of themotor shaft.
Lubricated for life with
high quality synthetic gear
oil.
Aluminium casing and motormounting flange reduce the
weight of the gearbox.
Motor mounting flange
compatible with Parker servo motors.
Seals on smallest possible
shaft diameter reduce fric-
tion and therefore the heat,
which in turn increases theefficiency. Continuous
operation without additional
cooling is possible. Protec-
tion class IP65.
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
4
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
5
rperm.
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
6
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
7
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
8
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
9
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
10
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
11
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
We reserve the right to make technical changes. The data correspond to the technical state at the time of printing. 192-753011N6 April 2008
© 2008 Parker Hannifin Corporation
Parker Hannifin GmbH & Co. KG
Electromechanical Automation
Robert-Bosch-Straße 22
D-77656 Offenburg, Germany
phone +49 (0)781 / 509-0
fax +49 (0)781 / 509-98176
www.parker-automation.com
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it
Rometec srl - www.rometec.it - Rometec srl - www.rometec.it - Rometec srl - www.rometec.it