December 2010! ! ! ! ! PANZ eMagazine

Next Issues:

March 2011

May 2011

In This Issue:Basf Announces Price IncreaseAusplas 2005 -- were you there!! Ausplas 2011 = PlasticsK Fair First time visitorDuromer relocates & centralises warehouseAuspack Plus 2011

Duromer Products relocated their Head Office and Manufacturing facility to a purpose built facility in Prestons NSW.

As a supplier of high-performance plastic compounds and resins,

Duromer Products

is committed to providing their customers with

innovative products,

technical expertise and solutions.

Duromer strive to meet the requirements of their diverse customer base by providing superior service and continuous improvement.

Ambassador Trade Fairs Travel! 10

Type to enter text

Contents Pages Contents Pages

13 2, 7

8, 22 4, 5

18, 21, 23

20

31 1, 26, 27

28, 29

9, 14, 16, 17

25 33

15 19

11 24

19 32

10

Contact us:PlastixANZ

68 Parkhurst Dve.,Knoxfield 3180 Victoria

Ph: 03 8743 2989email: info@plastixanz.com.au

METHODS

COMBINING FOR AUSTRALIA’S LARGEST EVER MANUFACTURING INDUSTRY EVENTFurther Information. www.ausplas.com

E info@exhibitionmanagement.com P 03 9699 4699

AUSPLAS = PLASTICS

Ausplas is Australia’s national trade exhibition for the plastics processing industry, held every

three years since 1987.

For 2011 around 70% of the exhibit space is devoted to operating displays of

processing and ancillary equipment shown alongside major presentations of new

materials, technologies and applications. There will be twice as many equipment

suppliers as were present in 2008.

160 exhibitors representing the leading Australian, European and Asian

equipment and materials suppliers with signifi cant showings from China,

Taiwan and Austria.

Tues 24th to Fri 27th May 2011 Melbourne Convention and

Exhibition Centre

MACHINERY

MATERIALS

Ausplas2011 PANZ eNews 28x6 12-2010.indd 1 9/12/10 5:28:38 PM

Ausplas 2005 Video -- were you there?

Can you find the mystery visitor?

The bookings for Ausplas 2011, to be held 24-27 May, are an interesting combination of previous exhibitors with their traditional agency arrangements presenting alongside ‘first time’ companies bringing new equipment and technology from Australia and overseas.

www.ausplas.com

Three Shows In One!Ausplas 2011 will stand alongside two other major trade shows, National Manufacturing Week and Austech. The three trade shows will occupy the entire Melbourne Exhibition Centre to present Australia’s largest and most comprehensive manufacturing industry event expected to deliver around 12,000 trade buyers.

Ausplas exhibitors are universally upbeat about the benefits these new relationships will present as they will facilitate greater interaction with the general manufacturing sector.

Viscon Australa to exhibit at AUSPACK PLUS 2011 With less than five months to go until AUSPACK PLUS 2011, exhibitors like Viscon Australia are signing up weekly to be a part of the largest biennial multi-platform exhibition of Packaging, Processing and Plastics Machinery, Materials and Associated Technology...more

Green Toys Inc. Goes Global Green Toys Inc., an award-winning innovator in safe, environmentally responsible products for children, announced today that its eco-toys are now available in Europe, the Middle East, Asia and Africa as a result of distribution agreements with Learning Resources Ltd. and others. The company has signed deals in Scandinavia with absolutelykids, in Spain with TocToys, in South Korea with Cukiz and in Israel with Etzale Ltd., with more to follow in 2011. Green ToysTM products are made in California from 100% recycled milk jugs—food-grade plastic that contains no BPA, phthalates, melamine or PVC...more

Fkur and Synbra Move on to Second-Generation PLA Compounds FKuR and Synbra realize the opportunities of the new PLA generation: GMO-free and heat-resistant. After first concluding development work, FKuR has started systematic tests with Synbra`s second-generation PLA produced from non-genetically modified carbohydrates. The PLA polymerization takes place in Synbra`s new plant in Etten-Leur with a capacity of 5000t/a. The lactide feedstock is produced in Purac`s fermentation process...more

Applied Machinery Partner with Kreyenborg

Applied Machinery are proud to announce our new exclusive partnership with the German plastics machinery manufacturing company, KREYENBORG.With more than 50 years experience in machinery and plant construction, the KREYENBORG Group is considered to be a well-established, premier supplier of components for extrusions and polymerisation and a global partner for the plastics industry.

With 100% of manufacturing performed in Germany, KREYENBORG equipment is renowned worldwide as being a leader in precision, reliability and product quality.

The KREYENBORG Product range includes the following:

* Screen Changers

* Melt Pumps

* Underwater Pelletising Systems

* Extruder Feeding Systems

* Special Silos

* Infrared Technology

* Mixing Technology

* Automation Systems

* Much more.....

To discuss how the precision range of KREYENBORG equipment can be of benefit to your organisation, please phoneDavid Macdonald on 03 9706 8066, or email directly david@appliedmachinery.com.au

AUSPACK PLUS Packaging, Processing and Plastics Machinery and Materials Exhibition.

AUSPACK PLUS is Australia`s leading International multi-platform exhibition to showcase packaging, processing and plastics machinery, materials and associated technologies.Recently expanded biennial packaging, processing and plastics machinery and materials exhibition, AUSPACK PLUS will be heading to the Melbourne Convention and Exhibition Centre from Tuesday the 22nd through to Friday the 25th of March 2011.

AUSPACK PLUS is owned and presented by the Australian Packaging and Processing Machinery Association, Australiaʼs only national packaging and processing machinery association.

For further information about exhibiting at AUSPACK PLUS 2011, please contact Mark Walsh on 03 9321 6758 or e-mail mwalsh@etf.com.au

Groundbreaking research into nanotechnology and advanced polymers will be accelerated with $3.6 million in infrastructure funding awarded to The University of Queensland (UQ)

Groundbreaking research into nanotechnology and advanced polymers will be accelerated with $3.6 million in infrastructure funding awarded to The University of Queensland (UQ) today.UQ was awarded funding for 10 projects under the Australian Research Council`s 2011 Linkage Infrastructure, Equipment and Facilities (LIEF) scheme, including $720,000 for an ultra-high resolution and advanced analytical scanning electron microscope facility... More

The perfect blend of simplicity and control

Your Plastics Ancillary SpecialistsAustralia Ph 1300 730 736 New Zealand Ph 0800 442 569 www.fleming.net.au

It’s our promise to you. More than simply a slogan, it’s the principle on which our company lives and thrives on day to day. Products that are completely thought through from the operators point of view. After all, technology is supposed to work for you, not against you. This unique balance of “pursuit of perfection” and “practicality” is built into each product/system. Take control of your future and contact us today.

GRAVIMETRIC BLENDERS VOLUMETRIC DOSING LIQUID COLOUR DOSING CONVEYORS QUICK MOULD CHANGE HOPPER LOADERS DRYERS SYSTEMS CHILLERS DIE HEATERS METAL SEPARATORS GRANULATORS ROTATIONAL MOULDING PVC MIXING PULVERISING

Maxibatch Powder Blenders Weigh Scale Blenders Vacuum Dryers Clear-Vu Loaders Liquid Colour Pumps

Gravimetric Feeders Yield Control Systems

Trotec Laser introduces iCut finishing on laser platforms starting from 720x430mm.

Trotec Laser has launched a new cutting and finishing option for UV printers. Sought by many printing companies, Trotec now offers the benefits of two worlds in one process: perfectly cut shapes using iCut with a built-in Sony camera system and perfectly finished edges on materials such as acrylics that only laser cutting can provide.

What sorts of jobs are ideal for the Trotec iCut lasers?The most benefit can be reaped from the iCut system on short-run jobs that require intricate cutting paths (eg, printed paper invites,) and/or polished edges (eg, on printed acrylics, POS materials). In both applications conventional mechanical cutting technologies have substantial and costly disadvantages and limitations. Printed materials like acrylic, MDF, polyester, cardboard, paper, textiles and many more can be cut with highest precision and intricacy.

Who is it for?"iCut finishing on the laser is most beneficial for Aussie printers with flatbed UV printing capabilities and for those making money with short-run paper or acrylic jobs" says managing director of Trotec Laser Australia Oliver Kronawittleithner "as this capability opens up a massive range of new products they will be able to offer their customers." In addition, iCut finishing is widely used for membrane switch production as it cuts and welds the several layers together in one single process.

How does iCut finishing work? A camera mounted on the laser head picks up registration marks printed on the various substrates, recognises distortions and rotations in the position of the material in the machine and adjusts the cutting path accordingly. This ensures a precise cut on the print, makes bleeds obsolete and guarantees a flawless end-product each and every time.

What are the commercial benefits?In a nutshell, iCut increases the type of work printers, signmakers and membrane switch manufacturers can offer and boosts productivity, leading the way to a more distinct differentiation of their companies in a very competitive market place. While this technology will not replace existing production processes, it has to potential to enhance and simplify them. "This provides something that most of them are striving for - differentiation from competitors," adds Kronawittleithner.

Where can I see Trotec lasers with iCut?Trotec Laser has operating showrooms in Sydney, Melbourne, Brisbane and Adelaide. "We need to be close to our customers and work with them towards a profitable business model utilising the potential of iCut finishing," says Kronawittleithner. "We back this by a proven track record of outstanding service and support over 10 years."

Free call 1800 674499 or email info@troteclaser.com.au to book appointments.

MegaWatt Heating Elements are manufacturers and suppliers of industrial heating elements and controls

Megawatt specialise in the plastics industry supplying;

Nozzle Heaters -- Band Heaters -- Welded -- Flex Band and open ceramic Type Heatersto suit

Injection Moulders, Blow Moulders, Film Extruders and Rigid Extrusion Plastics Machines.

Megawatt also specialise in Hot Runner Coil Heaters (inbuilt J t/couple), Plate Heaters, Cartridge Heaters, Temperature Controllers, Thermocouples, High Temperature Cables and all accessories.

MegaWatt Heating Elements are the Australian agents for;Arico hot runner controllers used in the injection moulding sector.

They are available in a range of 1,2,4,6,8,and 12 zone - up to 64 zone - cabinets.Arico hot runner controllers have high end functions and features for a reasonable cost .Arico hot runner controllers are also interchangeable with other brands.

For all your heating and control needs you can count on Megawatt Heating Elements.

Visit website: www.megawattheatingelements.com.au

Market Publishers Makes Available Market Research Report on Nanofibers, CNTs and Nanocomposites

LONDON -- Market Publishers Ltd has made available in-demand nanotechnology market research reports by Future Markets, Inc. Summary of the predictions made and findings of the report: .... more

Bisphenol A to be banned from baby bottles in the European Union from mid-2011European Union will ban production and imports of baby bottles with Bisphenol A from June 2011. The ban will see the "manufacture of polycarbonate infant feeding bottles with BPA" outlawed from March 1, 2011, and from June 1, 2011, "the placing on the market and the importation into the union of these bottles will be prohibited", as per a statement by the European Commission. The decision does not require the approval of the European Parliament, which in any case called in June for such a ban.

Hyperform® Nucleating Agents from Milliken Increase PP Processability

GHENT, Belgium -- Milliken`s Hyperform® HPN nucleating agents provide major improvements in performance and processability of polypropylene (PP) grades intended for thermoforming as well as injection moulding... more

Long time plastics industry supporter & travel arrangements organiser for many plastics industry events around the globe, Ambassador Travel General Manager Graeme Esler recently visited South America.Taking a break from organising travel to trade fairs around the world Graeme Esler of

Ambassador Travel recently spent some “time out” in South America.“Having to attend a conference in Buenos Aires gave me the opportunity to extend my stay and visit the magnificent Iguazu Falls and then fulfil a long held dream and spend time in Peru” he said. “I have always wanted to visit Cusco, the Sacred Valley, Machu Picchu and Lake Titicaca. Seeing the extraordinary ruins left from the Inca and pre-Inca periods was everything I expected and more. To visit these ruins is probably a once in a lifetime event and everyone should take the opportunity while the Aussie dollar is so strong”.Now a Peru enthusiast Graeme is looking forward to sending his clients to this amazing destination.

METHODS

COMBINING FOR AUSTRALIA’S LARGEST EVER MANUFACTURING INDUSTRY EVENTFurther Information. www.ausplas.com

E info@exhibitionmanagement.com P 03 9699 4699

AUSPLAS = PLASTICS

Ausplas is Australia’s national trade exhibition for the plastics processing industry, held every

three years since 1987.

For 2011 around 70% of the exhibit space is devoted to operating displays of

processing and ancillary equipment shown alongside major presentations of new

materials, technologies and applications. There will be twice as many equipment

suppliers as were present in 2008.

160 exhibitors representing the leading Australian, European and Asian

equipment and materials suppliers with signifi cant showings from China,

Taiwan and Austria.

Tues 24th to Fri 27th May 2011 Melbourne Convention and

Exhibition Centre

MACHINERY

MATERIALS

Ausplas2011 PANZ eNews 28x6 12-2010.indd 1 9/12/10 5:28:38 PM

Iguazu Falls

For all your travel needs -- business & pleasure, contact Ambassadot TravelGraeme EslerPh:(03) 9500-8355OR click here to email Graeme

Strength built on reliability and quality

Your Plastics Ancillary SpecialistsAustralia Ph 1300 730 736 New Zealand Ph 0800 442 569 www.fleming.net.au

Do you want to make a lasting investment in quality equipment without spending a fortune? Labotek has been a market leader in Australia for more than 25 years and has never been stronger than now. If you are considering materials handling or material drying, big or small, you can’t do better than Labotek! Denmark has produced numerous internationally famous brands that we all know, Lego, Danfoss, Bang & Olufsen, Grundfoss, Royal Copenhagen and many more. Labotek has been part of this elite group since 1945 when plastics began. So if you are considering an investment be sure to select quality equipment that won’t cost a fortune.

GRAVIMETRIC BLENDERS VOLUMETRIC DOSING LIQUID COLOUR DOSING CONVEYORS QUICK MOULD CHANGE HOPPER LOADERS DRYERS SYSTEMS CHILLERS DIE HEATERS METAL SEPARATORS GRANULATORS ROTATIONAL MOULDING PVC MIXING PULVERISING

DDM Desiccant Dryer

Mini-Feed 1PH Loader

Central Systems ConEvator 3PH Loader

ConEvator 3PH Powder Loader

CC PET CrystaliserMDFD Desiccant Dryer

DDL Desiccant Dryer

DMD Desiccant Dryer

An interesting insight to a first time visit to K Fair by Jeremy GledhillK 2010 was my first K-Fair and it has been an event that I have wanted to attend ever since I decided to work in the plastics industry. Often when you have looked forward to something for a long time it builds up in your mind and when you finally get there it can be a bit of a letdown. I am glad to report that K 2010 surpassed all my expectations.

Of course there was amazing technology on show from blown film lines processing a ton of material an hour to two shot, thin walled packaging with IML. But not everybody is looking for such big ticket items; I found the opportunity to talk with my existing suppliers, including tier two suppliers as some of the most beneficial aspects of the show. In fact within a week of returning to Australia we have been able to put some of the small things I picked up into practise. You don’t know what you don’t know, and that is really highlighted when you visit the K-fair.

The event was very well supported, in some halls it was like trying to catch a train in Shanghai; so many people all working there way down the corridors hoping to catch a glimpse of what ever may be on the nearest stand. When it get’s like this the best thing to do is find another hall to look around and come back later.

My first piece of advice is that you really will get a lot out of the show; yes it is a large expense, but keep in mind you only need to come back with one or two good ideas and the trip will be well and truly paid for. It is also a very efficient way to maintain relationships with suppliers; I found that in the week I was able to meet with all my overseas contacts. This would have taken about three weeks zigzagging around Europe.

It is critical to book early, many companies book there accommodation years in advance. I was lucky enough that one of our suppliers was able to give me one of the rooms they had.

The most important thing to do before getting to the show is to plan. Make sure you get appointments to see the most important suppliers, spread them out over the week. Have a list of all the stands you want to visit, even if you don’t have meetings organised. It is important to note down there locations. The best piece of advise is to pre-order the guide book to the K-show; it is about the size of a Lonely Planet guide book (costs around 22 Euro). The guide book also makes a fantastic reference as it is a who’s who of the world plastics industry. Try to leverage your local distributors of materials and machinery to get you direct meetings with there principles; it is amazing what you can learn talking directly to these companies.

My final piece of advice is to spend as much time at the show as possible, don’t think you will get it all don in a couple of days – you won’t. I was still getting useful information and contacts right up to the time I had to leave. And plan some time just to wonder around and take the atmosphere, it is amazing.

COMBINING FOR AUSTRALIA’S LARGEST EVER MANUFACTURING INDUSTRY EVENTFurther Information. www.ausplas.com E info@exhibitionmanagement.com P 03 9699 4699

AUSPLAS = PLASTICS MACHINERY, MATERIALS, METHODS.Ausplas is Australia’s national trade exhibition for the plastics processing industry, held every three years since 1987.For 2011 around 70% of the exhibit space is devoted to operating displays of processing and ancillary equipment shown alongside major presentations of new materials,

technologies and applications. There will be twice as many equipment suppliers as were present in 2008.160 exhibitors representing the leading Australian, European and Asian equipment and materials suppliers with signifi cant showings from China, Taiwan and Austria.

Tuesday 24th to Friday 27th May 2011 Melbourne Convention and Exhibition Centre

Ausplas2011PANZ eNews 6x20 12-2010.indd 1 9/12/10 5:27:40 PM

Avian

New Micromat Plus shredder concept from Lindner boosts recycling efficiency

With its Micromat Plus series of variously configurable single-shaft shredders for recycling plastic waste, Lindner reSource (www.lindner-resource.com) launched the new machine concept at K 2010.Available in three sizes, these units are optimally designed with low energy consumption and high productivity in mind.Three different drive concepts accommodate specific application needs. The available range of square blade or point blade rotors can be fitted with variously sized blades. Easily replaceable screens with 10 to 50 mm hole diameters make for even greater versatility.The newly developed internal force feeder can be individually adapted to the given application and an increased filling capacity ensures a constantly high material flow. Production waste of different source material characteristics – e.g., hard plastics, filaments or films – can thus be shredded just as optimally for further processing as post-consumer plastics such as PET bottles, agricultural film or carpeting. The patented inspection and maintenance hatch facilitates the replacement of blades and counter-blades as well as trouble shooting. Shutdown times are thus reduced significantly. These characteristics, combined with the convenient screen access, make the system quickly adaptable to changing requirements.

Geof Pile of Koga Recyclingtech, Lindner’s Australasian agent commented:

... More

BASF to increase prices for engineering plastics in Asia Pacific

Singapore, December 01, 2010BASF will increase prices of its Polyamide and PBT engineering plastics product lines in Asia Pacific effective from December 1, 2010. The prices of BASF’s Ultramid® Polyamide compounds will increase by US$300 per ton and Ultradur® PBT compounds by US$350 per ton.

The price adjustment is necessary due to the strong increase in raw material costs. BASF continues its efforts to offset rising cost in a difficult environment. However, the extraordinary market conditions force BASF to implement this price increase.

BASF provides a reliable supply of high quality engineering plastics and technology solutions to customers around the Asia Pacific region as well as globally, with a high level of product quality and services. BASF will continue to invest in application technology, research, development, and new production facilities, in order to develop innovative products and application solutions to help its customers to be more successful.

About BASFBASF is the world’s leading chemical company: Its portfolio ranges from chemicals, plastics and performance products to agricultural products, fine chemicals and oil and gas. As a reliable partner BASF creates chemistry to help its customers in virtually all industries to be more successful. With its high-value products and intelligent solutions, BASF plays an important role in finding answers to global challenges such as climate protection, energy efficiency, nutrition and mobility. BASF posted sales of more than €50 billion in 2009 and had approximately 105,000 employees as of the end of the year. Further information on BASF is available on the Internet at www.basf.com .

IMedia Contact

Sandra Aloi Corporate Communications Advisor - Australia & New Zealand Tel: 03 8855 6688

Cardia Bioplastics Team-up with Nestlé

Cardia Bioplastics Limited announced its collaboration with Nestlé S.A. to reduce the environmental impact of packaging.

This collaboration is in line with Cardia`s strategy of working with global brand owners who are looking for alternatives to conventional packaging. Cardia`s technology enables them to reduce the carbon footprint and the use of less oil in their packaging with an environmental benefit whilst maintaining product performance ... More

Milliken to Showcase Polyolefins Innovations at Arabplast 2011

At Arabplast 2011, Milliken will showcase additives for polyolefins (PO) offering possibilities in optical enhancement, performance improvement, and cost-effective and sustainable processing for Middle East market.

Key innovations on show at Hall 6, Booth C221 will include Millad® clarifying agents that achieve aesthetic properties in polypropylene (PP) and energy savings. Also featured will be new opportunities to address the critical problems facing manufacturers involved in many PP and polyethylene (PE) moulding processes through the significant advances in performance, processing and efficiency achievable with Milliken`s Hyperform® HPN nucleating agents ... More

COMBINING FOR AUSTRALIA’S LARGEST EVER MANUFACTURING INDUSTRY EVENTFurther Information. www.ausplas.com E info@exhibitionmanagement.com P 03 9699 4699

AUSPLAS = PLASTICS MACHINERY, MATERIALS, METHODS.Ausplas is Australia’s national trade exhibition for the plastics processing industry, held every three years since 1987.For 2011 around 70% of the exhibit space is devoted to operating displays of processing and ancillary equipment shown alongside major presentations of new materials,

technologies and applications. There will be twice as many equipment suppliers as were present in 2008.160 exhibitors representing the leading Australian, European and Asian equipment and materials suppliers with signifi cant showings from China, Taiwan and Austria.

Tuesday 24th to Friday 27th May 2011 Melbourne Convention and Exhibition Centre

Ausplas2011PANZ eNews 6x20 12-2010.indd 1 9/12/10 5:27:40 PM

HIT THE GROUND RUNNING AT AUSPACK PLUS 2011

With 80% of the exhibition space now sold AUSPACK PLUS is expected to be the largest biennial multi-platform exhibition of packaging of Packaging, Processing and Plastics Machinery, Materials and Associated Technology in Australasia in 2011.

Owned and presented by the Australian Packaging and Processing Machinery Association; Australia’s only national packaging and processing machinery organisation, the association prides itself on ensuring extensive exhibitor inclusions as a part of the standard space packages.

According to Mark Walsh, AUSPACK PLUS Event Manager, all exhibitors, large and small, are guaranteed key buyer campaigns, visitor promotions, media and public relations campaigns, exhibition previews in all industry trade magazines and much more.

“Small things like forklift and equipment hire during the

bump in and bump out schedule is inclusive of all exhibitor packages;

a unique offering that the APPMA is extremely proud of,” Mr Walsh said.

“AUSPACK PLUS 2011 continues to receive strong industry support from both national and international companies, who have decided that participation is a cost effective sales and marketing medium to showcase the latest innovations and technology available. An exhibition of this calibre attracts a highly qualified and quality audience genuinely interested in doing business and seeing the latest in packaging technology,”

“It is all about the quality lead for exhibitors and seeing the latest in innovation and technology for the visitor.” he said.

For further information about exhibiting at AUSPACK PLUS 2011, please contact Mark Walsh Ph: 03 9321 6758 e-mail: mwalsh@etf.com.au

Issued through: Exhibitions and Trade Fairs Pty Ltd Media Contact: Nerida Kelton 07 3278 6461 or nerida@publicprofiles.com.au

M.A.S Recycling Latest brochures

MAS specialises in machines and equipment for plastics recycling and processing and has a reputation in this sector for innovative solutions and best-of-class process technology competence.

For more information contact:

Geof Pile -- Koga Recyclingtech

Ph: +61395558121 -- email:geofp@koga.com.au

www.koga.com.au

COMBINING FOR AUSTRALIA’S LARGEST EVER MANUFACTURING INDUSTRY EVENTFurther Information. www.ausplas.com E info@exhibitionmanagement.com P 03 9699 4699

AUSPLAS = PLASTICS MACHINERY, MATERIALS, METHODS.Ausplas is Australia’s national trade exhibition for the plastics processing industry, held every three years since 1987.For 2011 around 70% of the exhibit space is devoted to operating displays of processing and ancillary equipment shown alongside major presentations of new materials,

technologies and applications. There will be twice as many equipment suppliers as were present in 2008.160 exhibitors representing the leading Australian, European and Asian equipment and materials suppliers with signifi cant showings from China, Taiwan and Austria.

Tuesday 24th to Friday 27th May 2011 Melbourne Convention and Exhibition Centre

Ausplas2011PANZ eNews 6x20 12-2010.indd 1 9/12/10 5:27:40 PM

Mulford International SourcingMulford Plastics are focussed on servicing the plastic sheet, film or roll requirements of any customer or market.

Our sourcing extends globally, allowing us to provide products for any end use application. Whether it is an advanced construction material or the very latest in the field of graphic design, we can source it for you. Mulford Plastics invests constantly in research and development, combing he world for the best products.The company’s philosophy of building long term relationships has given a supplier network second to none.

SuppliersAll our supply partners are quality assured manufacturers, providing us with the highest quality products and services.

WarehousingWarehousing is maintained to international standards with all branches equipped with the latest in plastics conversion equipment, offering cut to size on all products. We carry over 1000 products from the worlds leading manufacturers at our distribution centres through out Australia, New Zealand & Asia. Each location is run by experienced staff and supported with modern racking, cutting and logistic equipment.At a click of a button our sales teams can check stock and pricing information to provide instant feedback.

Sales & ServiceOur Sales and Customer Service are qualified to provide technical service and support, liasing with our global partners to provide the Customer with the perfect supply solution. All sales staff are trained to ensure clients get full benefits of the companies experience. Not matter what the combination visual, impact, durability, fabrication or colour- Mulford Plastics staff can assist you in product selection for your application.

Mulford Plastics Pty. Ltd., Lydia Swan Units 21-22 Slough Business Park - Holker Street,Silverwater 2128 NSW +61299118100

Heat Stability and Impact Strength of Purac’s PLA Compound Goes

Neck and Neck with ABS

Purac has developed a PLA compound with heat stability and impact strength comparable to ABS. This material utilizes stereo-complex technology which is based on Purac`s unique L-Lactide and D-Lactide monomers for the second generation PLA. The new PLA compound performs at a

comparable level to ABS in injection moulding applications.

"Purac`s L-Lactide and D-Lactide monomers now create solutions for high value added applications.

We are proud that we have achieved this milestone, as it will further enhance the application of PLA in semi-durables and consumer goods", said Dr. Kees Joziasse,

Manager - Innovation Center for PLA, Purac.

Purac is currently building a 75,000 tons per year Lactide plant in Thailand which will enable its

partners to bring new products to the market. The plant is scheduled to start production in the fourth

quarter of 2011 ... More

SIPA releases NEW SFR 6 EVO Rotary PET Blow Moulder

2010 NOV 15 SIPA of Veneto, Italy, a global leader of Stretch Blow Moulding Machines for the production of PET, PLA, OPP & multilayer bottles, have released a NEW Rotary Blow Moulder to their existing range. The SFR 6 EVO is the smallest version in the rotary range, with 6 blowing cavities. It is ultra compact and can produce up to 13,800 bottles/hour dependant on bottle design.The new machine is based on technology from two successful blow moulding systems: the SFL linear blow moulder and the SFR rotary blow moulder – both of which are considered among the most reliable systems available on the market today.

The SFR 6 EVO has the following features:- • A preform alignment system inside the machine that contributes to its compactness, which means that the machine can be shipped in a single unit making its installation much faster. • A vertical mould opening (SIPA Patent) which ensures maximum simplicity of preform/bottle transfer wheels and the lowest peripheral speed in the market. • Handling of the preforms is performed by a technopolymer transport chain, with the neck up heating and with very simple and low speed movements. • The heating oven features great process flexibility and can be used to produce extremely high quality standard containers as well as hot fill containers of various shapes. • SIPA ARS and ARS-PLUS air recovery systems results in a 50% saving on compressed air and electricity.

The SFR 6 EVO can produce extremely lightweight and complex containers such as a 1 litre container, weighing only 16g utilizing preforms which determine a total stretch ratio of 18, producing a speed of 2,200bph per cavity.

The design also allows the coupling with SIPA’s range of rotary fillers for synchronised filling and capping (SincroBloc version) for outputs more suited to the Australian and New Zealand markets. Suitable for products such as water, juice & isotonics, teas, carbonated soft drinks, milk & milk based products , edible oil, beer etc.

SIPA are represented in Oceania by HBM Plastics & Packaging Technologies.

Duromer Products – a compounder on the move

2010 was a transformative year for Duromer Products; structurally, geographically and strategically. These changes have left Duromer revived, refreshed and perfectly placed to deliver significantly

increased value to our customers across Australia and New Zealand.

Following ownership changes Duromer is now owned by Wayne McDonald and Jeremy Paton in an equal 50:50 partnership.

Andrew Stewart was appointed General Manager.

New PremisesIn April the company’s production and administrative facilities were moved from Rhodes to a purpose built facility in Prestons, a strategic location in the West of Sydney. Moving the factory gave the company the opportunity to re-evaluate the whole process of compounding and to install the latest materials handling equipment to maximise operating efficiency and dramatically improve working conditions.

Centralised WarehouseSeizing the opportunity to centralise warehouse operations Duromer consolidated four locations to a single state-of-the-art warehouse with the most intense use of the floor area possible and modern container loading and off-loading facilities.

Duromer’s DNASince Duromer’s foundation in 1988, its DNA has been in Nylon and PET based compounds. This has now been expanded to include PC/ABS alloys and compounds based on high-density polyethylene, polypropylene, polycarbonate, PBT, ABS, ASA and acetal designed to meet the special needs of customers.

Appointed Evonik Australian Distributor

In August the company was appointed as Australian distributor for Evonik High Performance Polymers, including Nylon 12, Nylon 6:12, Bio Based Nylon 6:10, Trogamid (transparent nylon), Polyphthalamide (High Temperature Nylon) and PEEK.

Duromer range increasingDuromer now includes an ever-increasing range of materials for resale including ABS and other styrenics from Thailand’s leading producer, IRPC and Acetal (POM) from Formosa. More products for resale will be added in 2011.

Duromer Knowledge -- ExperienceThe body of knowledge in Duromer encompasses not only excellence in compounding but a deep appreciation of the moulding and tooling processes. The ability to analyse the process from material selection, though tooling and moulding to the finished article gives Duromer a unique capacity to address the challenges of our customers. The company welcomes new enquiries, large or small, either by phone to +61 2 8797 0277 or through the enquiry form on its fully updated website www.duromer.com which also contains useful information on the products and services offered by the company.

New Zealand Exclusive Agent

The company is delighted to announce that one of the leading plastics suppliers in New Zealand, Polymers International Limited (PIL) has been appointed as its exclusive agent in this important market. The contact is Murray Knight, phone +64 9 304 2872, email murrayk@polymers.co.nz

Bright Future for PlasticsDuromer sees a bright future for the plastics industry on both sides of the Tasman. The company looks forward to serving the industry in 2011 and for many more years to come.

Contact Duromer

Lot 109 Progress Circuit,Prestons NSW 2170

Postal address:

PO Box 4527 Casula Mall, NSW 2170

Telephone: +61 (02) 8797 0277

FAX: +61 (02) 8797 0299

www.duromer.com

• Thermoformers••••• Vacuum former••••• Clamp frames•••••• CNC Routers•••••• Router Bits•••••• CAD CAM Software•••••• 3D Printers•••••• Contact

thermoforming technology

Flecknoe manufactures and distributes a large range of machinery and tools for all aspects of Thermoforming and Plastic Fabrication.

• Thermoformers and Vacuum fomers to form all types of materials and products.• 5 Axis CNC Routers for mould construction and part trimming.• Router bits for all types of material that can be machined on CNC Routers.• CAD/CAM desktop design suite for 3D product design, mould machining and

production trimmingWe can design a thermoforming solution tailored to your specific requirements:

• reduce cycle times• minimise rejects• improve repeatability• cost effective technologies• Australian made, Australian owned to the world

Benefit from Flecknoe's 30 years experience in the manufacture and distribution of products and services for every stage of Thermoforming Production.

Neue Herbold release new shredder for thick wall plastic pipe Neue Herbold, of Sinsheim, Germany, global specialists in the production of size reduction machinery such as granulators (pipe and profile), grinders, pulverizers etc have released the new HZR 1300/4 Pipe Shredder for the plastics industry -- More

Environmental Enterprises distribute biodegradable packaging

BiodegradableStrawberryPack

Biodegradable Sandwich Wedge Pack

More information

Biopolymer

Microstructure of part of a DNA double helix biopolymerBiopolymers are polymers produced by living organisms. Cellulose, starch, chitin, proteins, peptides, DNA and RNA are all examples of biopolymers, in which the monomeric units, respectively, are sugars, amino acids, and nucleotides... More

Biobag Australasia Pty LtdPh:02 8257 3338 Email: neil@biobaganz.com

Polychem are very pleased to announce access to 2 new machinery lines.

Plas mec s.r.l. ITALY high speed turbo mixers and drying plant for wpc

In 1967 PLAS MEC started in a small manufacturing structure. More than 3 decades later, PLAS MEC is know as an International manufacturer of equipment for plastics processing & powder coating processing.

IPT GERMANY Pressure pipe testing equipment for polymer pipes

The professionals for pipe test installations

IPT has over 40 years of experience in developing and building test installations for the plastic industry and plays a major role in the innovation and improvement of pipe test techniques.

World-wide at your service

We arrange for your complete and reliable solutions and co-ordinate as a project manager the whole implementation. Thus you deal with just one partner, with whom you can discuss finance, planning and organisation.

Polychem Pty. Ltd.0298753080www.polychem.com.au/

COMBINING FOR AUSTRALIA’S LARGEST EVER MANUFACTURING INDUSTRY EVENTFurther Information. www.ausplas.com E info@exhibitionmanagement.com P 03 9699 4699

AUSPLAS = PLASTICS MACHINERY, MATERIALS, METHODS.Ausplas is Australia’s national trade exhibition for the plastics processing industry, held every three years since 1987.For 2011 around 70% of the exhibit space is devoted to operating displays of processing and ancillary equipment shown alongside major presentations of new materials,

technologies and applications. There will be twice as many equipment suppliers as were present in 2008.160 exhibitors representing the leading Australian, European and Asian equipment and materials suppliers with signifi cant showings from China, Taiwan and Austria.

Tuesday 24th to Friday 27th May 2011 Melbourne Convention and Exhibition Centre

Ausplas2011PANZ eNews 6x20 12-2010.indd 1 9/12/10 5:27:40 PM

Moldflow, Injection Molding Simulation imtech design Moldflow Consulting

Operate the full suite of Moldflow CAE programs for injection moulding advice. We can undertake Moldflow injection moulding simulation on the smallest medical device to the largest car instrument panel, quickly and efficiently to provide you with practical solutions to complex injection moulding problems. Our specialty is Moldflow simulation of the plastic injection moulding process with the sole aim of identifying potential problems or areas where material or cycle time savings can be made in order to help our customers turn more plastic into profit.

Contact: Keith Hague

Tel: 03 97239917 Email: sales@imtechdesign.com

Web: imtechdesign.com

Accurate and Confidential Moulding Solutions Since 1987

We wish you & your families Merry Christmas

A Very Happy & Healthy New Year