platform: xk09 firmware: dlho4 › documents › 1876_xk0996… · once done, the interface red led...

Vehicle Compatibility Chart

Wiring Diagram.

.........................................................................................................................................

Installation Procedure Overview..................................................................................................................................

...........................................................................................................................................................

Vehicle Wiring Reference Chart..................................................................................................................................

Programming the Module............................................................................................................................................

User Configuration - Optional Programming...............................................................................................................

02

03

04

05

05

06

Warranty...................................................................................................................................................................... 07

Index

TECHNICAL SUPPORT / INFORMATION

web resources:www.xpresskit.com

www.xpressvip.com

www.directechs.com† Acura and Honda are registered trademarks and property of their respective companies.

Door lock only module that interfaces directly with Honda and Acura to provide features compatible with sliding doors, motorized trunks/hatches, and factory alarms.

Installation Guide

Downloadable Firmware for Platform XK09: DLPKGM, DLGM5X, CHRYSLER, PLXR, PKN3, DLVW1, DLHO4, DLHO5, DLHY, DLKIA1, DLKIA2, DLCH2, DLCH3, DLCH4.

Upgradable Door Lock & Alarm Interface

Platform: XK09Firmware: DLHO4

DL

doorlockINTERFACE

Update AlertFirmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product.

Rev.: 20100108


© 2009 Directed Electronics. All rights reserved.

Vehicle Application Guide

2010

2009

2008

2007

2006

2005

2004

2003

Acura

CSX X X X X

RDX X X X X

TL X X X X X

TSX X X X X X

Honda 10 09 08 07 06 05 04 03

Accord X X X X X

Accord Hybrid X X X

Civic X X X X X

Civic Hybrid X

CRV X X X X

Odyssey X X X X X X

Ridgeline X X X X X

Vehicle Compatibility ChartPage 2

To see a list of available features for each vehicle, visit www.xpresskit.com.

Rev.: 20100108



Please Note: Failure to proceed in the following order could result in possible vehicle damage.

If your remote start system has D2D Jumpers, make sure both Jumpers are in the horizontal position.

Installation Procedure OverviewPage 3

4

3

2

See details on page 5.

Module programming

Power up the XK09

Once done, the interface red LED will turn ON.

If connected in W2W

Connect the 20-pin harness.

If connected in D2D

Connect the 4-pin D2D harness first, then connect the 20-pin harness.

Caution! The 20-pin connector can be easily plugged in backwards.

1

Make the necessary connections in the vehicle, as instructed in the vehicle-specific guides.

Connect the remote starter to the vehicle

Make all the connections as per the provided wiring schematics, either in W2W or D2D.

Wiring

Rev.: 20100108



Pro

gra

mm

ing

bu

tto

n

XK09 Front Side

* These wires are not required in D2D.

4 PIN connectorwire side view

01

04

GreenGrayBlue/Red

(-) Door Detection Output*(-) Trunk Detection Output*(-) Hood Detection Output*

XK09 Back Side

Wiring DiagramPage 4

10

01

20

11

20 PIN connectorwire side view

Blue/White

Violet/Black

Red/White

White/Violet

Light Green

Blue

(-) Ground When Running (Status)*

(-) Driver sliding door*

(-) Trunk*

(-) Passenger sliding door*

(-) Lock*

(-) Unlock*

(+) 12 Volt*

GreenSingle Wire CAN

(-) Ground*

Black

Red

+12VDC

See the Vehicle Wiring Reference Chart on page 5.

XKLOADER2

Option A - Firmware UpgradesUse with D2D harness XKD2D65.

InternetUSB CABLE

USB PORT

Option B - Range Extender ConnectionUse with D2D harness HARD2D Rev. 3.

Option C - Plug D2D Harness Directly Into Remote Starter

XL202**

XL202

Antenna

D2D connectorwire side view

(+) 12 VoltRX

(-) GroundTX

** Sold separately.

Rev.: 20100108



Vehicle Years Data Wire BCM Location

Acura

CSX 2006-09 Pink Pin 4 in 7-pin Transponder connector

RDX 2007-10 Pink Pin 4 in 7-pin Transponder connector

TL 2004-08 Brown/Black Pin 4 in 21-pin DKP connector (bottom row)

TSX 2004-08 Brown/Red Pin 4 in 21-pin DKP connector (bottom row)

Honda

Accord 2003-07 Brown/Red Pin 4 in 21-pin DKP connector (bottom row)

Accord Hybrid 2005-07 Dark Green Pin 4 in 21-pin DKP connector (bottom row)

Civic 2006-10 Pink Pin 4 in 7-pin Transponder connector

Civic Hybrid 2006 Pink Pin 4 in 7-pin Transponder connector

CRV 2007-10 Pink Pin 4 in 21-pin DKP connector (bottom row)

Odyssey 2005-10 Dark Green/Red Pin 4 in 21-pin DKP connector (bottom row)

Ridgeline 2006-10 Brown/Black Pin 4 in 21-pin DKP connector (bottom row)

Connector location:

DKP: Green 21-pin connector above relays at the fuse box, in the driver kick panel.

Transponder: at the ignition switch.

IGN

START

OF

F

KEY

Remove Key

IGN

START

OF

F

KEY

Key at IGN

3 Turn the key to the OFF position and remove it from the ignition barrel.

1

2Insert the key into the ignition barrel and turn it to the Ignition (IGN) position.

The LED turns OFF to confirm that the module was successfully programmed.Off

&

Vehicle Wiring Reference ChartPage 5

Module Programming

Once all the wires are properly connected, plug the wire connector into the module.

Once done, the interface red LED will turn ON.

If connected in W2W

Connect the 20-pin harness.

If connected in D2D

Connect the 4-pin D2D harness first, then connect the 20-pin harness.

Caution! The 20-pin connector can be easily plugged in backwards.

On Solid

&Connect module

Rev.: 20100108



Mode 1 - Driver door priority Mode 6 - Lock when remote starter stops Mode 8 - Reset

*Option 1: 1st pulse unlocks all doors. *Option 1: Activate. *Option 1: No reset.

Option 2: 1st pulse unlocks driver

door, 2nd pulse unlocks all doors.

Option 2: Deactivate. Option 2: Complete reset of the

options and module.

* Default option.

Page 6

User Configuration - Optional Programming

1Insert the key into the ignition at the OFF position and hold the Programming button down for at least 2 seconds. The LED flashes rapidly for 2 seconds to confirm you are in programming mode.

&Flash 2 Secs

&IG

N

START

OF

F

KEY

Press & HoldKey at OFF

6 Remove the key from the ignition barrel.IG

N

START

OF

F

KEY

Remove Key

5 To exit the programming mode, hold the Programming button down until the LED flashes once quickly. Flashes Once

&Press & Hold

3To change the MODE, press once on the Programming button. The LED confirms the MODE with a number of slow flashes.

Only modes 1, 6 and 8 are available.&

Press OnceNo. of Slow

Flashes = Mode

2Release the Programming button. The LED first flashes a number of times slowly to indicate the MODE. It then flashes a number of times quickly to indicate the OPTION.

&No. of Slow

Flashes = ModeNo. of Quick

Flashes = Option

&Release

4To change the OPTION in the selected MODE, press LOCK or UNLOCK on the alarm or remote starter transmitter. The LED confirms the OPTION with a number of quick flashes.

See the list of options at the bottom of this page.

&No. of Quick

Flashes = Option

or( (Press

USER MODES are identified by a slow LED flashing pattern. For example, 1 slow flash = Mode1 and 2 slow flashes = Mode 2.

Rev.: 20100108



This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.:Under no circumstances shall the manufacturer and distributors of this product be liable for consequential damages sustained in connexion with this product and neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only.

For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete product and Part description.

This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE PART AS DESCRIBED ABOVE.

Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.920-0007 07-06

PROTECTED BY U.S. PATENTS: 5,719,551; 6,011,460 B1 *;6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876 B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1; 7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7 , 0 4 6 , 1 2 6 B 1 ; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; CDN. PATENT: 2,320,248; 2,414,991; 2,415,011; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2 , 4 2 0 , 9 4 7 ; 2,426,670; 2,454,089 EUROPEAN PATENT:1,053,128 PAT. PENDING: 2,291,306; MADE IN CANADA

Limited One-Year Consumer WarrantyPage 7

Rev.: 20100108



platform: xk09 firmware: dlho4 › documents › 1876_xk0996… · once done, the interface red led...

Documents