pnmsj on windows virtual server installation manual
TRANSCRIPT
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
1/27
NWD-162569-02E
P ASOLINK
N ETWORK
MANAGEMENT
S YSTEM
PNMSj on WindowsVirtual Server
Installation Manual
NEC CorporationCopyright 2013
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
2/27
NWD-162569
- i -
Table of Contents
1 INTRODUCTION ..................................................................................................................... 1
2
INSTALLATION SEQUENCE ............................................................................................... 2
3 Server Machine Configuration ................................................................................................ 3
3.1 BIOS Setting ....................................................................................................................... 3
3.2 ESXi Installation ................................................................................................................ 4
4. Client Setting ............................................................................................................................. 6
4.1 vSphere Client installation ................................................................................................ 6
4.2
ESXi Setting........................................................................................................................ 9
4.2.1 Create Storage .......................................................................................................... 10
4.2.2 Time Configuration .................................................................................................. 11
4.2.3 Create Virtual Machine ........................................................................................... 12
4.3 OS installation(Virtual Machine) ................................................................................... 22
4.4 VMware Tools installation on Virtual machine............................................................ 24
5.
Install PNMSj application ...................................................................................................... 25
6. Configure PNMSj Server setting ........................................................................................... 25
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
3/27
NWD-162569
- 1 -
1 INTRODUCTION
This document describes the Virtual machine setting procedure for PNMSj.
NOTE
Refer to "PNMSj System Requirement Manual" for the
recommendation size of heap memory.
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
4/27
NWD-162569
- 2 -
2 INSTALLATION SEQUENCE
Start
ESXi Installation
vSphere Client Installation
ESXi Setting
OS Installation
PNMSj application installation.
PNMSj server configuration
End
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
5/27
NWD-162569
- 3 -
3 Server Machine Configuration
3.1 BIOS Setting
On BIOS setting window, check whether Virtualization Technology option is enabled.
(1)
Power on the server, then press the F2 button while BIOS starting up.
NOTE
BIOS setting start-up key may differ according to the
environment.
(2) On BIOS setting window, Enable the Virtualization Technology option.
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
6/27
NWD-162569
- 4 -
3.2 ESXi Installation(1)
Download the software from the following URL. Account Registration is required before
downloading.
http://www.vmware.com/Software name: VMware ESXi 5.1
Write to DVD device after downloading.
(2) Insert the VMware ESXi5.1 DVD ROM to the server machine.
(3)
On the [ Welcom to the VMware ESXi Installation ] window.
Press the Enter key to continue.
(4)
On [End User License agreement] window.
Press the F11 key(Accept and Continue).
(5) On [Select a Disc to Install or Upgrade] window.
Select the folder to be installed and press the Enter to continue.
(6) On [Please select a keyboard layout] window.
Select the US default and press the Enter to continue.
(7) On [Please enter a root password] window.
Input your Root password and Retype it to confirm.
Press the Enter key to Continue.
(8) On [Confirm install] window.
Press the F11 key(Install).
(9)
Eject the DVD media then press Enter to Reboot.
After [Installation Complete] window is appeared.
Eject the DVD media then press Enter to Reboot .
(10) Press the F2 key after rebooting.
(11) Input the password that you have created in step 7 then press Enter.
(12) Select theConfigure Management Network then press the Enter.
(13) Select the Network Adapters then press the Enter.
(14) Specify one of the NIC to be used by pressing Space key, then press Enter to continue.
NOTE
A DIFFERENT NIC ASSIGNED FOR NMS MUST BE
SELECTED. IN ADDITION TO THIS, ONE PNMSJ
SYSYEM REQUIRES ONE SEPARATE NIC.
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
7/27
NWD-162569
- 5 -
(15) SelectIP Configurationthen press Enter.
(16)
Select Set static IP address and network configuration,press the Space key(Mark
Selects), then input theIP address/Subnet Mask/Default gateway accordingly.
(17)
Press the Esc key to open Configure Management Network: Confirmwindow after
confirming that there are no mistakes in the setting value. Press Y to save the setting.
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
8/27
NWD-162569
- 6 -
4. Client Setting
vSphere Client installation is required to manage Virtual machine.
4.1 vSphere Client installation
(1) Download the software from the following URL. Account Registration is required beforedownloading.
http://www.vmware.com/
The software name: VMware vSphere Client 5.1Write to the device after downloading.
(2) Insert the device and double click .exe file.
(3) Select the Language and click [OK].
(4)
Click [Next >].
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
9/27
NWD-162569
- 7 -
(5) Click [Next >].
(6) Select I agree to the terms in the license agreement, then click [Next >].
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
10/27
NWD-162569
- 8 -
(7) Select the installation folder then click [Next >].
(8)
Click [Install].
(9) Click [Finish]to complete installation.
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
11/27
NWD-162569
- 9 -
4.2 ESXi Setting
Perform initial setting by connecting VMware vSphere Client and ESXi Server.
(1) Start the VMware vSphere Client.(2) Login in by typing IP address / User name / Password used in the chapter 3.2 ESX installation.
Due to guaranteed SSL certification is required in some case, security warning message mayappear required.
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
12/27
NWD-162569
- 10 -
4.2.1 Create Storage
When there is no Datastore, please create it by following procedure.
(1) Slect Home Inventory Inventory.Select Storagein Configuration Tab, then Click Add Storage.
(2) Select Disk/LUNthen [Next >].
(3) Specify the location for Data store then click [Next >].
(4) Select VMFS-5, then [Next >].
(5) Confirm disk layout, then [Next >].(6)
Input the name for Datastore, then [Next >].
(7)
Specify the capacities/sizes according the System Requirement Manual, then click [Next >].
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
13/27
NWD-162569
- 11 -
4.2.2 Time Configuration
(1) Select Home Inventory Inventory.
Select Time Configuration in Configuration Tab, then click on Properties.
(2)
Set the date and time for the host in the vSphere Clinets local time.Click [OK].
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
14/27
NWD-162569
- 12 -
4.2.3 Create Virtual Machine
(1)
Select Home Inventory Inventory.Select Networking in Configuration Tab. Click on Add Network.
(2) Select Virtual Machine, then click [Next >].
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
15/27
NWD-162569
- 13 -
(3) Select NIC, then click [Next >].
(4) Input the name for Network Label, then [Next >].
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
16/27
NWD-162569
- 14 -
(5) Click [Finish].
(6) Right click on ESXi server IP Address then select New Virtual Machine.
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
17/27
NWD-162569
- 15 -
(7) Select Custom then click[Next >].
(8)
Input the Virtual Machine name, then click [Next >].
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
18/27
NWD-162569
- 16 -
(9) Select a storage,then click [Next >].
(10) SelectVirtual Machine Version: 8, then click [Next >].
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
19/27
NWD-162569
- 17 -
(11) Select the following, then click [Next >].Guest Operating System: Windows
Version: MicrosoftWindows Server 2008 R2 (64-bit)
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
20/27
NWD-162569
- 18 -
(12) Set as following, then click [Next >].Number of virtual sockets: 1
Number of cores per Virtual sockets: The number into which the choice number of
possible cores was divided by the number of virtual machines.
(13) Specify the memory size by following System Requirement Manual, then click [ Next > ].
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
21/27
NWD-162569
- 19 -
(14) Set as following then [Next >].NIC: 1Network: Select the Network Label that you have created in step (4)
Adapter: VMXNET3
Connect at Power On: ON
(15)
Select LSI Logic SAS then click [Next >].
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
22/27
NWD-162569
- 20 -
(16)
Select Create a new virtual disk then click [Next >].
(17) Set as following then click [Next >].Capacity: Follow the Sysmte Requirement Manaul
Disc Provisioning: Thick Provision Eager Zeroed
Location: Store with virtual machine
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
23/27
NWD-162569
- 21 -
(18)
Leave as Default, click [Next >].
(19)
Click [Finish].
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
24/27
NWD-162569
- 22 -
4.3 OS installation(Virtual Machine)
OS(Windows Server 2008 R2) installation from vSphere Client
(1)
Select the Virtual machine that configured in section 4.2 ESXi setting above, right click onVirtual Machineselect Edit Setting.
(2) SelectCD/DVD drive 1 in Hardware Tab, Set as following and click [OK].
Device Type: Host DeviceDevice Status: Connect at power on
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
25/27
NWD-162569
- 23 -
(3) Insert the OS media to the server.(4)
Select the Virtual machine that configured in section 4.2 ESXi Setting.
Right click on Virtual Machine then select Open Console.
(5) Click the Power on buttonOS installation will be started.
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
26/27
NWD-162569
- 24 -
4.4 VMware Tools installation on Virtual machine
(1) From the console of Virtual machine, select Virutual MachineGuestInstall/Upgrade
VMware Tools.
(2) Executesetup64.exe.
-
8/9/2019 PNMSj on Windows Virtual Server Installation Manual
27/27
NWD-162569
5. Install PNMSj application
Install the PNMSj application following the procedures mentioned in the PNMSj Installation Manual.
6. Configure PNMSj Server setting
Follow the procedures mentioned in the Server and Daemon setting manual.