polymer preparation unitdosya.ertek.com/pdf/kataloglar/seko/seko poli hazırlama... ·...
TRANSCRIPT
Poly SeriesPolymer PreParation Unit
02
Function
the PolySeries of Polymer Preparation Units, has beenspecifically designed to provide effective solutions to theneeds of Water treatment Customers and offers a completerange of polymer batching and metering systems.
the polymer preparation unit is designed to automaticallyprepare polymer solutions which are used as coagulants forthe eventual removal of suspended particles in the watertreatment processes of a number of industries fromswimming pool maintenance through to the various stagesof waste water treatment.
the PolySeries can use polyelectrolyte in either powder orliquid form and is mixed with water. the polyelectrolytepowder is dosed from the storage hopper using a shaft lessscrew feeder with an integrated lump breaker, into thewetting and mixing cone, in proportion to the water loadedin the tank. this special feature allows to carefully controlthe amount of powder used, optimising the process andreducing over consumption.
Fed by gravity, the prepared mixture falls into the firstpreparation tank and then passes through the traps into thematuring and batching tanks. these tanks are equippedwith stirrers, which may also be present in the batchingtanks. the volume of the deposits and the continuousaction of the stirrers ensures that a homogenous mixture isobtained and that the retention time is suitable for perfectdilution. the electrical control panel ensures total systemautomation, guaranteeing correct preparation and the rightbatching.
Polymer Preparation Unit
the preparation tank is divided into three sectors: dissolving V1, maturing V2 and storage V3, interconnected by siphons that forma perfect flow between the tanks necessary for the formation of a top quality solution. the polyelectrolyte from the dosing unitcomes into contact with water, which is sprayed from a nozzle that ensures uniform dispersion.
the water/polyelectrolyte mixture then drops into the tank belowwhere the dissolving phase begins. in this first, dissolving sector V1, aslow agitator keeps the contents of the tank moving ensuringthorough homogenization of the solution. the siphon transfers thesolution to the maturing sector, V2, where another slow agitator keepsthe solution uniform until maturing is complete. then the solution istransferred to storage sector V3 from where it can be transferred foruse.
the level switches installed in this sector, control plantautomatic functions:
High and normal level switch when the solution reachesthe high level, this switch stops the powder dosing unit andcloses the water inlet solenoid valve. in the normal levelposition, it enables the dosing unit to function and opens thewater solenoid valve.
Low level switch when the solution falls to minimum levels,this switch stops the dosing pump and sets off an alarmindicator on the electrical switchboard.
03
n automatic water supply system comprised of: a shut-off valve, filter, safetypressure switch, pressure gauge, pressure reducer, solenoid valve, controlvalve, flow meter and special dispensing nozzle.
n tanks made entirely of stainless steel and PPH, with inspection covers andemptying valves for each compartment.
n Customised mixers, optimised to obtain a homogeneous mixture, are made ofstainless steel.
n Batching screw made entirely of stainless steel, with batching adjustmentactuated by precise speed regulator.
n electric protection and control panel, with built-in or touchscreen panel,designed for manual/automatic operation, equipped with emergency stop andwiring to all system components.
n Conductivity level probes for high, low and very low levels with audiblewarning.
Construction characteristicsoptionalequipment
n automatic powder hopperloading.
n minimum level probe in thepowder hopper.
n Stirrer in the batching tank.
n overflow probe.
n Prefabricated post-dilutionsystems. Heating resistor in thepowder exhaust pipe
BenefitsUsing the PolySeries systems provides the following benefits:
n Considerable savings in terms of polymer usage and running costs.
n Precision in the preparation and batching stages, optimising the processes.
n Space saving and system centralisation.
Using polymers and flocculants considerably facilitates the processes of removingparticles and solids suspended in liquid in the following applications:
n treating potable and industrial processing water.
n Purifying waste water.
n treating sludge, in order to improve the performance of centrifuges and filterpresses.
n Processes for the paper, chemical, petrochemical, mineral processing, canningindustries.
applications
04
PolyCendoseffective polymermetering
< Processing of liquid polymer(0.05–1.0 %) and powderedpolymers (0.05–0.5 %)
< offers minimal product carry-over
< extraction of the polymersolution and drainage of thechambers via the front of thestorage tank
< User-guided input of thesolvent concentration, as well ascalibration of the powdermetering unit and liquidconcentrate pump.
< optional PlC Programmablelogic
< Controller with ProFiBUSmodule
< Version with terminal boxavailable on request
< extraction rate up to 8,000 l/h
194020
60
1325 570 455
270
the PolyCendos System isa triple chamber continuousflow system, used to batchflocculation aids for thepreparation of polymersolutions, and features astorage tank subdivided intothree chambers.
05
PolymanProducingpolymersolutions inbatch quantities
< ideal for use where there is noneed for continuous operation
< manual addition of flocculantsin batch quantities
< robust design
< Cost-effective
< Batching tank manufacturedfrom polypropylene, andincludes flushing system
< Gentle mixing for constantperformance (electric stirrer)
< terminal box
850
125 300 125
325
8010
60
200
1140
the PolyMan Systemoffers batch operation forthe manual batching ofliquid and powderedpolymers.
06
PolytowerCompact doubledecker system
< Processing of liquid polymer(0.05–1.0 %) and powderedpolymers (0.05–0.5 %)
< no mixing of fresh and maturedpolymer
< User-guided input of thesolvent concentration as well ascalibration of the powdermetering unit and liquidconcentrate pump waterapparatus with flow meter andfitting set for the dilution water
< Gentle mixing for constantperformance (electric stirrer)
< optional PlC Programmablelogic
< Controller with ProFiBUSmodule
< Version with terminal boxavailable on request
2150
1940
132
345 271
the compact Polytower double-decksystem is divided into two storagetanks stacked on top of each otherand is designed to batch flocculationaids for the preparation of polymersolutions. the PolyTower systemhas been designed specifically withspace efficiency in mind.
07
1974
660 570
1640
(456
)
PolymasterPolymer batchingsystem ready foroperation
< System comes assembledready for operation
< 3 individual cylindricalpolypropylene storage tanksserve as batching, maturing andstorage tanks
< Cylindrical storage tanks arehydraulically coupled viaoverflow channels
< Dry feeder with drive motor,dosing pipe heating andpowder funnel with seal tightlid
< Flushing system for flushingand wetting of the powder
< Gentle mixing with two electricstirrers for constantperformance
< Control cabinet for automaticcontrol of the entire system
the PolyMaster System isan automatic triple chamberbatching system forpowdered flocculent,suitable for the preparationof 0.05 to 0.5% polymersolutions and offers themost complete systems ofthe Poly Series.
For more information
seko is an International Group, developing, manufacturing and delivering its products in more than 50 countries,through its subsidiaries and an extended network of distributors, agents and authorized dealers.
seko is a leading manufacturer of dosing pumps and dosing systems with more than 40 years experience. This longactivity allowed seko to acquire a vast experience in diversified applications and to confirm its international successin many industrial fields through the supply of reliable solutions for the dosing, injection and transfer of liquids.
A Worldwide Group at your service
Ertek Yapı ve Makina Endüstri Ekipmanları San. ve Tic. Ltd. Ști.
Halkapınar Mah. Pamuk Plaza İș Merkezi 1082 Sokak No: 3 M 35170 Yenișehir Konak / İZMİR Tel: (0232) 469 43 53 Faks: (0232) 457 46 51
www.ertek.com • [email protected]
www.ertek.com
ISO9001