power brochure 2012 issue1 english - home |...

Power Brochure 2012_Issue1_English.indd 1 25/04/2012 14:59:14

tecbond® hotmelt adhesives provide instant, permanent bonding on a vast range of materials without the use of harmful solvents. They are ideal for fast repetitive gluing applications.

Our hotmelts are available in stick or cartridge form which are easily loaded into hand-held glue guns. The solid adhesive is pushed into a heated chamber where it melts, and can be extruded from the nozzle by gently squeezing the trigger.

Most materials can be bonded with hotmelt adhesives providing the parts can be assembled while the adhesive is still molten. The molten adhesive is applied to one of the surfaces to be bonded. When the parts are pressed together the heat quickly dissipates into the substrates, causing the adhesive to solidify, and a bond or seal is made instantly.

Working times of our hotmelts vary from just a few seconds to several minutes: the actual time will depend on adhesive formulation, ambient temperature, substrate temperature, and the amount and confi guration of the adhesive applied.

tecbond® hotmelts are 100% solid, non-toxic adhesives containing no solvents (no VOCs) or water. Users do not have to worry about odours or mould in fi nished products, or about paying for a solvent that just evaporates.

tecbond® hotmelt adhesives are safe and easy to store, and have a virtually unlimited shelf life.tec

bond

® adhe

sives

tec g

lue gu

ns tecTM glue guns are designed to apply our wide range of tecbond® hotmelt adhesives, easily, quickly and reliably.

They are low-cost capital items, highly portable and designed to be totally reliable in tough industrial environments.

tecTM glue guns can apply hotmelt adhesive in bead, dot and even spray patterns, depending on the model selected.

The wattage of the tool normally determines the melt-rate and should be selected based on the amount of adhesive required per assembly, as well as the number of assemblies needed to be produced per hour.

In general the larger tools are more powerful and are capable of providing greater volumes of hotmelt adhesive at the correct temperature for optimum bonding.

Conte

nts

12mm (½″) tec glue guns 112mm (½″) tecbond glue sticks 212mm (½″) gastec glue gun 315mm (⅝″) glue guns & glue sticks 443mm (1¾″) bead glue gun 543mm (1¾″) tecbond glue cartridges 643mm (1¾″) spray glue gun 7Speciality tools & high performance hotmelts 8Nozzles 9Thermostats & gun stands 10Accessories 11,12

TM


Information point

> Carton sealing> Packaging sub-assemblies> Contract packaging> Waxed and coated boards> Moisture barrier attachment> Fine art packaging (acid free)> Protective foams

> Tile displays> Automotive trim> Badges & emblems> Plastic assembly> Sand core assembly> Luggage assembly> Fabrics and foams> Magazine tippins> Sample books

> Upholstered furniture> Clamping, positioning & templates> Fabric bonding> Corner spacer blocks> Drawer bottom reinforcement> V-groove assembly> Knot fi lling> Picture framing> Securing mirrors to frames

> Gripper attachment> Carpet repairs> Stair nosing> Laminate beading attachment> Stair carpet bonding> Under-fl oor heating

> Component stabilisation> Attaching components to PC boards> Potting> Coil terminating> Wire staking> Vibration protection> Strain relief of cables> Fixing & securing battery packs> Telephone & data cable installation

> Floristry foam> Flower arranging> Gift card attachment> General assembly> Balloons (using lowmelt adhesive only)> Banners

> Card making> Wooden models> Rosettes> Promotional items> Novelty crackers> Colour & glitter glues for decoration> Party hats

> Laminated and coated boards> Plastic trim attachment> Reinforcement

(High output tools are available forlarge displays)

Packaging Product assembly Woodwork

Flooring Electrical Floristry

Arts & craftsPoint of sale

Helpful tip!Choose your adhesive before choosing your glue gun!


1 12mm (½″) tec glue guns tec150

tec805 tec810 tec820

tec175 tec250

Melt rate 2.0kg (4½lbs)/hrGlue size 12mm (½″) glue stickVoltage 120V and 230VWattage 250WHeater CartridgeTemp Control Interchangeable thermostat (pg 10)Hotmelt gun °C (°F) 195°C (380°F)Lowmelt gun °C (°F) 130°C (265°F)Power cable 3M (10ft)Weight 500g (18oz)Packaging Plain box (10 per ctn)

Melt rate 400g (14oz)/hrGlue size 12mm (½″) glue stickVoltage 100-240 V Wattage 100W (18W) Heater PTCTemp Control Self-regulating heaterHotmelt gun °C (°F) 195°C (380°F) Lowmelt gun °C (°F) 130°C (265°F) Power cable 1.8M (6ft)Weight 230g (8oz)Packaging PET blister (10 per ctn)

Melt rate 400g (14oz)/hrGlue size 12mm (½″) glue stickVoltage 100-240 V Wattage 100W (18W) Heater PTCTemp Control Self-regulating heaterHotmelt gun °C (°F) 195°C (380°F) Lowmelt gun °C (°F) 130°C (265°F) Power cable 1.8M (6ft)Weight 230g (8oz)Packaging Plain box (10 per ctn)

Melt rate 750g (1½lbs)/hrGlue size 12mm (½″) glue stickVoltage 100-240 V Wattage 120W (18W) Heater PTCTemp Control Self-regulating heaterHotmelt gun °C (°F) 195°C (380°F) Lowmelt gun °C (°F) 130°C (265°F) Power cable 1.8M (6ft)Weight 230g (8oz)Packaging Plain box (10 per ctn)

Melt rate 1.8kg (4lbs) /hrGlue size 12mm (½″) glue stickVoltage 110V - 250VWattage 30W(250W)Heater PTCTemp Control Self-regulating heaterHotmelt gun °C (°F) 195°C (380°F) Lowmelt gun °C (°F) 130°C (265°F) Power cable 2M (6½ft)Weight 450g (16oz)Packaging PET blister (10 per ctn)

Melt rate 2.5kg (5½lbs)/hrGlue size 12mm (½″) glue stickVoltage 120V and 230VWattage 250WHeater CartridgeTemp Control User adjustable thermostatHotmelt gun °C (°F) Adjustable 130-195°C (265-380°F)Lowmelt gun °C (°F) Covered abovePower cable 3M (10ft)Weight 500g (18oz)Packaging Plain box (10 per ctn)

Hobby and craft 12mm (½″) glue gun, lightweight and easy to use, removable stand & full hand trigger. Supplied with 4 clear general purpose glue sticks.

Reliable low cost 12mm (½″) glue gun, lightweight and easy to use, removable stand and full hand trigger.

Light industrial 12mm (½″) glue gun, lightweight and easy to use, power on light, removable stand & full hand trigger and removable nozzle.

Low cost medium size industrial 12mm (½″) glue gun, eco heater chamber design for low power consumption, robust & easy to use. Medium output, 3 minute warm-up time & illuminated on/off switch.

Heavy duty medium size 12mm (½″) glue gun, robust & easy to use with medium output, 2 minute warm up time, fast recovery & illuminated on/off switch.

Adjustable temperature, heavy duty medium size 12mm (½″) glue gun. Robust and easy to use, fast recovery, medium output, 2 minute warm up time & illuminated on/off switch.


Formulation Description Colour Open time Viscosity

14 High delivery, very fast setting packaging adhesive Light brown Short Low1942 Product assembly adhesive for wood and many plastics, nylon, ABS & rigid PVC Brown Medium/Long Medium1X Low viscosity, wood working and packaging adhesive. Medium open time Light brown Medium Medium213 Economical, general purpose adhesive. Suitable for ceramics, rigid PVC & polystyrene Light brown Long Medium214 Economical, fast setting, packaging adhesive Light brown Short Medium23 Medium viscosity multi-purpose adhesive. For fabric, hard & soft wood & many plastics Light brown Long Medium232 Economical, high viscosity, general purpose adhesive. Suitable for glass, fabrics, wood, card, and some plastics Clear & Colours Medium High240 High delivery, long open time, multi-purpose, clear adhesive. For use with many plastics & light gauge metals Clear Long Medium246 High performance adhesive for painted, varnished and other smooth surfaces Clear & Black Medium High248 Very high performance, acrylic based hotmelt. Excellent adhesion to smooth and shiny surfaces Clear Long Medium260 High performance, long open time, tough, fl exible adhesive. Suitable for ceramics, plastics & woods Light brown Long Medium261 Economical, high performance, tough, fl exible adhesive with long open time. For use with ceramics, plastics & woods Light brown Long Low342 High viscosity, fast setting, white adhesive with instant grab. Suitable for heavy duty carton board & cable attachment White Very short High5 High delivery, low viscosity, long open time, product assembly adhesive. For wood, plastic & metals Light brown Medium/Long LowLM44 Lowmelt, fast setting, high performance, white adhesive. Ideal for expanded polystyrene, thin fi lms & balloons White Short Low

Polyamide adhesive7713 Economy general purpose polyamide with high heat and chemical resistance Amber Medium Medium

7718 Coloured, low viscosity, potting, encapsulation, and knot-fi lling/wood repair polyamide adhesiveAmber, Beige, Black, Cola, Cream, Oak

6 colours Short Low

7784 High & low temperature-resistant multi-purpose polyamide adhesive Amber Medium Medium7785 High temperature and chemical-resistant multi-purpose polyamide adhesive Amber Medium Medium

Formulation Description Open time Viscosity

232 (Coloured) Economical, high viscosity, general purpose adhesive. Suitable for glass, fabrics, wood, card, and some plastics Brown, Dark Green, Light Green, Dark Blue, Light Blue, Gold, Silver, Red, Yellow, Black, White & Orange

Medium High

Formulation Description Open time Viscosity

232 (Glitter) Economical, high viscosity, general purpose adhesive. Suitable for glass, fabrics, wood, card, and some plastics Glitter Red, Glitter Green, Glitter Silver, Glitter Gold, Multicoloured Glitter

Medium High

Not sure which glue?Call us now for more informationSee back for details

12mm (½″) tecbond glue sticks 2


The gas-tec600 is a robust compact hotmelt glue gun that runs on butane gas. It does not require mains electricity or batteries but operates using easily refi llable LEC™ (Liquid Energy Cells) power technology. The gas-tec 600 has been built to a very high standard and incorporates a soft-feel handle and full-hand trigger, making it a very comfortable gun to use.

> Refi ll the LEC™ gas cartridge using standard cigarette lighter canisters.

> Refi lls in just 15 seconds - suffi cient to keep the gas-tec 600 running for approximately 1½ hours.

> Easy to start up - simply turn the gas dial and press the piezo ignition button.

> Reaches operating temperature in just 5 minutes.

> Thermostatically controlled to give the optimum temperature to achieve the best glue delivery.

> The gas-tec 600 can be used for a huge range of applications from shop fi tting, exhibition displays, fl ooring and carpet laying, ceramic tile displays, low voltage wiring, to dent repairs on cars and many more.

Melt rate 1.5kg (3.3lbs)/hrGlue size 12mm (½″) glue stickVoltage Gas poweredWattage 185WHeater CatalyticTemp Control Thermostatic gas valveHot melt gun °C (°F) 195°C (380°F) Low melt gun °C (°F) Not availablePower cable CordlessWeight 390g (14oz)Packaging PET blister (10 per ctn)

Takes standard 12mm (½″) glue

sticks

Refi llingLEC™ cartridges

Gas ON/OFF wheel & ignition button

Full-hand soft-feel trigger

& handle

Refi llable cartridges LEC™ (Liquid Energy Cells)

ON indicator window & silicon

rubber nozzle shroud

3 12mm (½″) gas-tec glue gun


tec805 tec810 tec820

tecbond® high performance 15mm (⅝″) glue sticks

Melt rate 1.8kg (4lbs)/hrGlue size 15mm (⅝″) glue stickVoltage 110V - 250VWattage 30W (250W)Heater PTCTemp Control Self-regulating heaterHot melt gun °C (°F) 195°C (380°F) Low melt gun °C (°F) 130°C (265°F) Power cable 2M (6½ft)Weight 450g (16oz)Packaging PET blister (10 per ctn)

Melt rate 2.0kg (4½lbs)/hrGlue size 15mm (⅝″) glue stickVoltage 120V and 230VWattage 300WHeater CartridgeTemp Control Interchangeable thermostat (pg 10)Hot melt gun °C (°F) 195°C (380°F) Low melt gun °C (°F) 130°C (265°F) Power cable 3M (10ft)Weight 500g (18oz)Packaging Plain box (10 per ctn)

Melt rate 2.5kg (5½lbs)/hrGlue size 15mm (⅝″) glue stickVoltage 120V and 230VWattage 300WHeater CartridgeTemp Control User adjustable thermostatHot melt gun °C (°F) Adjustable 130-195°C (265-380°F)Low melt gun °C (°F) Covered abovePower cable 3M (10ft)Weight 500g (18oz)Packaging Plain box (10 per ctn)


14 High delivery, very fast setting packaging adhesive Light brown Short Low213 Economical, general purpose adhesive. Suitable for ceramics, rigid PVC & polystyrene Light brown Long Medium214 Economical, fast setting, packaging adhesive Light brown Short Medium23 Medium viscosity multi-purpose adhesive. For fabric, hard & soft wood & many plastics Light brown Long Medium232 Economical, high viscosity, clear general purpose adhesive. Suitable for glass, fabrics, wood, card, and some plastics Clear Medium High240 High delivery, long open time, multi-purpose, clear adhesive. For use with many plastics & light gauge metals Clear Long Medium248 Very high performance, acrylic based hotmelt. Excellent adhesion to smooth and shiny surfaces Clear Long Medium260 High performance, long open time, tough, fl exible adhesive. Suitable for ceramics, plastics & woods Light Brown Long MediumLM44 Lowmelt, fast setting, high performance, white adhesive. Ideal for expanded polystyrene, thin fi lms & balloons White Short Low

Polyamide adhesive7718 Coloured, low viscosity, potting, encapsulation, and knot-fi lling/wood repair polyamide adhesive

Amber, Beige, Black, Cola, Cream, Oak6 colours Short Low

7784 High & low temperature-resistant multipurpose polyamide adhesive Amber Medium Medium7785 High temperature and chemical-resistant multipurpose polyamide adhesive Amber Medium Medium

Low cost medium size industrial 15mm (⅝″) glue gun, eco heater chamber design for low power consumption, robust & easy to use. Medium output, 3 minute warm-up time & illuminated on/off switch.

Heavy duty medium size 15mm (⅝″) glue gun, robust & easy to use with medium output, 2 minute warm-up time, fast recovery & illuminated on/off switch.

Adjustable temperature, heavy duty medium size 15mm (⅝″) glue gun. Robust and easy to use, fast recovery, medium output, 2 minute warm-up time & illuminated on/off switch.

15mm (⅝″) tec glue guns & glue sticks 4

Adhesive test packs

available. Call now!

See back for details


High output 43mm (1¾″) glue gun for industrial use. All-electric & extremely robust. Power-on light and removable integral stand with built in nozzle spanner.

tec3150

tec6100 tec7100

tec3200

Melt rate 3kg (6½ lbs)/hrGlue size 43mm (1¾″) glue cartridgeVoltage 120V and 230VWattage 300WHeater CartridgeTemp Control Interchangeable thermostat (see page 10)Hot melt gun °C (°F) 195°C (380°F) Low melt gun °C (°F) 130°C (265°F) Power cable 3M (10ft)Weight 1.15kg (2½lbs)Packaging Plain box (5 per ctn)

Melt rate 3.5kg (8lbs)/hrGlue size 43mm (1¾″) glue cartridgeVoltage 120V and 230VWattage 400WHeater CartridgeTemp Control Electronic plug in temperature modulesHot melt gun °C (°F) 195°C (380°F) fi tted, 130°C (265°F) and 215°C (420°F)

Plug-in modules includedLow melt gun °C (°F) Covered abovePower cable 3M (10ft)Weight 1.15kg (2½lbs)Packaging Plain box (5 per ctn)

Melt rate 4.1kg (9lbs)/hrGlue size 43mm (1¾″) glue cartridgeVoltage 120V and 230VWattage 500WHeater CartridgeTemp Control Interchangeable thermostat (see page 10)Hot melt gun °C (°F) 195°C (380°F)

High temp polyamide version 215°C (420°F) also availableLow melt gun °C (°F) 130°C (265°F) Power cable 3M (10ft)Weight 1.4kg (3lbs)Packaging Plain box (5 per ctn)

Melt rate 5.0 kg (11lb)/hrGlue size 43mm (1¾″) glue cartridgeVoltage 120V and 230VWattage 1000WHeater CartridgeTemp Control Interchangeable thermostat (contact distributor)Hot melt gun °C (°F) 195°C (380°F)

High temp polyamide version 215°C (420°F) also availableLow melt gun °C (°F) 130°C (265°F) Power cable 3M (10ft)Weight 2.3kg (5lbs)Packaging Plain box (5 per ctn)

Extremely robust 43mm (1¾″) pneumatic glue gun for industrial use. Reduces operator fatigue, power-on light, 8 bar (120psi) 14 l/min (0.5 cfm) air supply required.

Extremely robust, very high output 43mm (1¾″) pneumatic glue gun for industrial use. Reduces operator fatigue, speed loader to reduce down time and power-on light. 8 bar (120psi) 14 l/min (0.5 cfm) air supply required.

High output all-electric 43mm (1¾″) glue gun for Industrial use. Extremely robust with electronic temperature control, automatic standby, plug-in temperature modules & power-on light.

5 43mm (1¾″) tec glue gun



14 High delivery, very fast setting packaging adhesive Light brown Short Low1942 Product assembly adhesive for wood and many plastics, nylon, ABS & rigid PVC Brown Medium/Long Medium1X Low viscosity, wood working and packaging adhesive. Medium open time Light brown Medium Low213 Economical, general purpose adhesive. Suitable for ceramics, rigid PVC & polystyrene Light brown Long Medium214 Economical, fast setting, packaging adhesive Light brown Short Medium23 Medium viscosity multi-purpose adhesive. For fabric, hard & soft wood, & many plastics Light brown Long Medium232 Economical, high viscosity, clear general purpose adhesive. Suitable for glass, fabrics, wood, card, and some plastics Clear Medium High240 High delivery, long open time, multi-purpose, clear adhesive. For use with many plastics & light gauge metals Clear Long Medium248 Very high performance, acrylic based hotmelt. Excellent adhesion to smooth and shiny surfaces Clear Long Medium260 High performance, long open time, tough, fl exible adhesive. Suitable for ceramics, plastics & woods Light brown Long Low261 Economical, high performance, tough, fl exible adhesive with long open time. For use with ceramics, plastics & woods Light brown Long Low265 Long open time product assembly adhesive for smooth and shiny surfaces, & many plastics Light brown Medium Medium267 High & low heat resistant, medium open time, product assembly adhesive for polypropylene, wood & metals Light brown Long Low342 High viscosity, fast setting, white adhesive with instant grab. Suitable for heavy duty carton board & cable attachment White Short High5 High delivery, low viscosity, long open time, product assembly adhesive for wood, plastic & metals Light brown Medium/Long LowLM44 Lowmelt, fast setting, high performance, white adhesive. Ideal for expanded polystyrene, thin fi lms & balloons White Short Low

Polyamide adhesive7784 High & low temperature-resistant multi-purpose polyamide adhesive Amber Medium Medium7785 High temperature-resistant and chemical-resistant multi-purpose polyamide adhesive Amber Medium Medium

Adhesive test packs



43mm (1¾″) tecbond glue cartridge 6

Not sure which glue?Call us now for more informationSee back for details


spraytec™ high performance 43mm (1¾″) adhesive cartridges

Melt rate 4.2kg (10lbs)/hrGlue size 43mm (1¾″) glue cartridgeVoltage 120V and 230VWattage 500WHeater CartridgeTemp Control Interchangeable thermostat (see page 10)Hot melt gun °C (°F) 180°C (350°F) Low melt gun °C (°F) n/aPower cable 3M (10ft)Weight 1.4kg (3lbs)Packaging Plain box (5 per ctn)

tec6300 tec7300

Extremely robust, 43mm (1¾″) spray glue gun. Non-toxic adhesive spray system, sprays hotmelt at any angle, adjustable spray pattern to cover large areas. Apply hotmelt to heat sensitive substrates without damage. Speed loader to reduce downtime, plus power-on light. 8 bar (120psi) 85 l/min (3 cfm) air supply required.

Extremely robust 43mm (1¾″) spray glue gun for industrial use. Sprays hotmelt at any angle with adjustable spray pattern. Cover large areas with a non-toxic spray adhesive. Apply hotmelt to heat sensitive substrates without damage. 8 bar (120psi) 85 l/min (3 cfm) air supply required.

Formulation Description Cololloour Open ttimime VisVisscoscosc ityity

spraytec 410 Pallet stabilisation spray adhesive, also for expanded polystyrene LigLight brorownwnw Lononnnggggg Mediumspraytec 420 General purpose spray adhesive. Suitable for fabric, upholstery foams, bubble fi lm etc Light brown Up to 3 mins Mediumspraytec 425 High delivery, high performance, spray adhesive for wood, many plasticcs and pre-cast concrete moulds Light brown Up to 3 mins Lowspraytec 430 High performance, long open time spray adhesive. Suitable for polyproppylene, foams, wood and cardboard Light brown Up to 6 mins Medium

Melt rate 5.25kg (11½lbs)/hrGlue size 43mm (1¾″) glue cartridgeVoltage 120V and 230VWattage 1000WHeater CartridgeTemp Control Interchangeable thermostat (contact distributor)Hot melt gun °C (°F) 180°C (350°F) Low melt gun °C (°F) n/aPower cable 3M (10ft)Weight 2.3kg (5lbs)Packaging Plain box (5 per ctn)

7 43mm (1¾″) spraytec glue guns

Specially designed for use in the tec6300 & tec7300, and available to bond virtually any material. The range provides variations in setting time, colour, heat resistance and viscosity to suit every application.

Adhesive test packs





2169-CT Peelable hotmelt adhesive for temporary bonds on promotional items Clear Permanent Low4741-CT Pressure-sensitive for smooth shiny surfaces, soft fl exible bond Amber Permanent Low9010-CT Polyurethane reactive hotmelt. Sets hard, maximum heat and chemical resistance White Long Medium9030-CT Polyurethane reactive hotmelt. Clear fl exible bonds, maximum heat and chemical resistance Clear Very long High


2169-Bulk Peelable hotmelt adhesive for temporary bonds on promotional items Transparent Permanent Low4741-Bulk Pressure-sensitive for smooth shiny surfaces, soft fl exible bond Amber Permanent Low

tec1050 Cartridge glue gun for peelable, full pressure-sensitive and reactive PUR adhesives. Low cost & easy to use. Cordless with base station, 10-15 minute warm-up time, power-on and ready-to-use indicator lights.

Melt rate 50g (1¾oz) cartridge / 10 minsGlue size 50g (1¾oz) CT cartridgeVoltage 120V and 230VWattage 500W (14W)Heater PTCTemp Control Self regulating heaterHot melt gun °C (°F) Not availableLow melt gun °C (°F) 130°C (265°F) Power cable 1.8M (6ft)Weight Gun 250g (9oz), base 260g (9¼oz)Packaging Plain box (10 per ctn)

Extremely robust table-top glue dot dispenser for industrial use. Make your own glue dots from 7mm (¼″) to 30mm (1¼″) - glue lines also possible. Uses peelable, full pressure -sensitive and conventional hotmelts in ½kg (1lb) blocks, pillows and pellets. 10-20 minute warm-up time. Power-on light. No compressed air required. Optional foot pedal available.

dot-tec8200

Melt rate 1.5 kg (3⅓lb)/hrGlue size ½kg (1lb) blocksVoltage 120V and 230VWattage 600WHeater CartridgeTemp Control Preset thermostat

Fitted with 180°C (350°F) that gives aglue temperature of 160°C (320°F)

Power cable 3M (10ft)Weight 4.7kg (10lbs)Packaging Plain box (1 per ctn)

tecbond® high performance bulk adhesive

tecbond® high performance CT cartridges

Speciality tools & high performance hotmelts 8


A wide variety of nozzles are available for specialised purposes and to speed up adhesive application. These include multiple hole, extensions, spreaders and special nozzles for carton closing.

Available nozzles to fi t tec250

Reference Type Description

tec1

50

tec1

75

tec2

50

gast

ec 60

0

tec8

05

tec8

10

tec8

20

tec1

050

tec3

150

tec3

200

tec6

100

tec6

300

tec7

100

tec7

300

dotte

c820

0

MDJ002 Standard Nozzle 2mm (0.080″) orifi ce, 4mm (3⁄16″) extension - - - - - - - - - - - - -MDJ004 Extension Nozzle 2mm (0.080″) orifi ce, 12mm (½″) extension - - - - - - - - - - - - -MDJ005 Spreader Extension Nozzle 5mm (0.250″) wide fl at orifi ce, 11mm (½″) extension - - - - - - - - - - - - -MDJ007 Slotted Spreader Allows a 12mm (½″) wide spread of glue - - - - - - - - - - - - -MDJ008 Precision Nozzle 1.25mm (0.050″) orifi ce, 5mm (¼″) extension - - - - - - - - - - - - -

MDJ002 MDJ004 MDJ005 MDJ007 MDJ008


tec1

50

tec1

75

tec2

50

gast

ec 60

0

tec8

05

tec8

10

tec8

20

tec1

050

tec3

150

tec3

200

tec6

100

tec6

300

tec7

100

tec7

300

dotte

c820

0

ADJ004 Slotted Spreader Nozzle 6mm (¼″) wide fl at orifi ce, 30mm (1¼″) extension - - - - - - - -ADJ010 Standard Nozzle 2mm (0.080″) orifi ce - - - - - - - - - - - -ANZ016 Standard Nozzle 2mm (0.080″) orifi ce - - - - - - - - - - - -ADJ012 Spreader Extension Nozzle 6mm (¼″) wide fl at orifi ce, 30mm (1¼″) extension - - - - - - - - - - -ADJ013 Angled Extension Nozzle 3mm (0.120″) orifi ce, 30mm (1¼″) extension - - - - - - - - - - -ADJ014 Precision Extension Nozzle 1.25mm (0.050″) orifi ce, 30mm (1¼″) extension - - - - - - - - - - -MDJ010 Standard Nozzle 2mm (0.080″) orifi ce - - - - - - - - - - - - - -ADJ015 2 Hole Nozzle 2 parallel adhesive lines 10mm (0.4″) apart - - - - - - - -ADJ016 3 Hole Nozzle 3 parallel adhesive lines 5mm (¼″) apart - - - - - - - -ADJ017 ‘L’ Nozzle Fast full overlap carton sealing - - - - - - - -ADJ018 ‘T’ Nozzle Fast centre fl ap carton sealing - - - - - - - - - - -


tec1

50

tec1

75

tec2

50

gast

ec 60

0

tec8

05

tec8

10

tec8

20

tec1

050

tec3

150

tec3

200

tec6

100

tec6

300

tec7

100

tec7

300

dotte

c820

0

PA6045 Narrow angle spray nozzle 1.2mm (0.050″) orifi ce (Red) - - - - - - - - - - - - -PA6046 Narrow angle spray nozzle 1.5mm (0.060″) orifi ce (Red) - - - - - - - - - - - - -PA6056 Narrow angle spray nozzle 2.0mm (0.080″) orifi ce (Red) - - - - - - - - - - - - -PA6060 Medium angle spray nozzle 2.0mm (0.080″) orifi ce (Yellow) - - - - - - - - - - - - -PA6061 Medium angle spray nozzle 1.5mm (0.060″) orifi ce (Yellow) - - - - - - - - - - - - -PA6064 Wide angle spray nozzle 2.0mm (0.080″) orifi ce (Blue) - - - - - - - - - - - - -

Narrow Medium Wide

Standard fi tted nozzles are shown in Green Do not fi t or change nozzles unless the gun is hot!

9 Nozzles

ADJ004 ADJ010 ANZ016 ADJ015 ADJ016 ADJ017 ADJ018MDJ010ADJ012 - ADJ013 - ADJ014

Available nozzles to fi t tec805 - tec810 - tec820 - tec3150 - tec3200 - tec6100 - tec7100

Available nozzles to fi t tec6300 & tec7300


Most hotmelts run at the ‘standard’ glue gun temperature of 195ºC (380ºF), but we also offer lowmelts that run at 130ºC (265ºF) and heat resistant polyamides that run at 215ºC (420ºF). It is also sometimes useful to run at a lower temperature to prevent heat damage to some materials the adhesive might be applied to. The tools in the table below can have thermostats or modules changed by a competent person to adjust the temperature.

FFS003

Gun stands

Type Temperature

tec8

10(T

herm

osta

t)

tec8

20

tec3

150

(The

rmos

tat)

tec3

200

(Plu

g in

Mod

ule)

tec6

100

(The

rmos

tat)

tec7

100

(The

rmos

tat)

tec6

300

(The

rmos

tat)

tec7

300

(The

rmos

tat)

dot-t

ec82

00

(The

rmos

tat)

For lowmelts 130ºC (265°F) SK-810-T130

Adju

stab

le13

0ºC

- 195

ºC

(265

°F -

380°

F) AED057 PA3023 AED015

Cont

act

dist

ribut

or

N/A N/A N/AFor hotmelts 160ºC (320°F) SK-810-T160 N/A PA3024 N/A N/A N/A N/AFor hotmelts 180ºC (350°F) SK-810-T180 N/A PA3025 N/A AED012 AED023 AED037For hotmelts 195ºC (380°F) SK-810-T195 AED055 PA3026 AED010 AED010 N/A N/AFor polyamide hotmelts 215ºC (420°F) SK-810-T215 N/A PA3027 AED014 N/A N/A N/A

Reference Description

tec1

50

tec1

75

tec2

50

gast

ec 60

0

tec8

05

tec8

10

tec8

20

tec1

050

tec3

150

tec3

200

tec6

100

tec6

300

tec7

100

tec7

300

dotte

c820

0

FFS003-SPARES Metal gun stand For craft/light industrial tools, 100 & 200 series - - - - - - - - - - - -PA3096-SPARES Metal gun stand For heavy duty tools, 3000, 6000 & 7000 series (can also be wall mounted) - - - - - - - - -MDC009 Metal gun stand For heavy duty tools, 600 & 800 series (can also be wall mounted) - - - - - - - - - - -SK-800-MAGSTAND Magnetic gun stand For 800 series only, smaller stand attaches to metal plate or other

metal surfaces - - - - - - - - - - - -

SK-800-MAGSTANDMDC009PA3096

The tools below have temperatures which are factory set and cannot be changed, so the correct temperature tool must be ordered.

Temperature

tec1

50

tec1

75

tec2

50

tec 8

05

gast

ec 60

0

tec 1

050

For lowmelts and PURs 130ºC (265°F) tec150LT tec 175LT tec 250LT tec805LT N/A tec 1050For hotmelts 195ºC (380°F) tec150 tec 175 tec 250 tec 805 gas-tec 600 N/A

N/A

Not sure?Call us now for more informationSee back for details

Part numbers in Green come as standard with the tool.

Thermostats & gun stands 10

Thermostats


The tec-AIR 50TDC is an almost silent, compact, air compressor. It weighs just 21 kilos (46lbs), and comes complete with a robust tubular carrying frame. It is rated at 50 l/min (2.15cfm) and works to a maximum pressure of 8 bar (120psi). It is capable of operating up to two tec6100 or tec7100 applicators or one tec6300 or tec7300 spray applicator intermittently for small area coverage. It can also be used with most other pneumatic tools such as staplers, air brushes and tyre infl ators.

The tec6100/BMK (Bench Mount Kit) converts your tec6100 & tec7100 to a statically mounted, foot operated glue station. It allows the operator to have both hands free for gluing applications, improving productivity by up to 100%.

The tec4000/TK (Timer Control) enables a controlled amount of adhesive to be applied. This improves quality, guarantees consistent bonding and reduces the amount of adhesive used. Can only be used in conjunction with the bench mount kit.

Bench mount kit & timer Silent air compressor

The SB/1200 spring balancer is a tool support system with an easily adjustable tension with a maximum cord length of 1.6 metres (5ft). It minimises operator fatigue, increases productivity and prevents tools from being dropped.

Spring balancer

Maximum pressure 8bar (120psi)Maximum volume 50 l/min (2.15cfm)Receiver capacity 3 litres Voltage 230VWattage 340WPower cable 2.15MWeight 21kgs (46lbs)Packaging Plain box (1 per ctn)

Pressure regulator

This combined pressure regulator, fi lter and water separator is ideal for use with the tec6100, tec6300, tec7100 & tec7300 glue guns. It is used to ensure accurate adhesive dispensing and long tool life.

Not sure?Call us now for more informationSee back for details

11 Accessories

Please note:Timer unit is sold separately!

Reference Description

tec1

50

tec1

75

tec2

50

gast

ec 60

0

tec8

05

tec8

10

tec8

20

tec1

050

tec3

150

tec3

200

tec6

100

tec6

300

tec7

100

tec7

300

dotte

c820

0

TEC6100/BMK Bench mount kit & foot pedal - - - - - - - - - - - - -TEC4000/TK Timer Control - - - - - - - - - - - - -TEC-AIR50TDC Silent air compressor - - - - - - - - - - -PA6039 Combined pressure regulator, fi lter and water separator - - - - - - - - - - -SB/1200 Spring balancer for tools up to 1.5kg (3lbs) - - - - - - - - - -SB/3000 Spring balancer for tools from 1.5 up to 3kg (3-6.5lbs) - - - - - - - - - -


Reffereereereerencenn DessDesD cricricririptiptionono

tec

tec1

50150

tec

tec1

7575

tecec

50250

gas

gast

ecec6060

00

tecec

805

8050

tecec

810

810

tec

tec8

20820

tec

tec1

051050

00

tec

te31

531

500

tec

tec3

2032000

tec

tec6

100610000

tec

tec6

306300000

tec

tec7

1071000

tec

tec7

3073000

dot

dotte

cte

c82082

000

PDDPDDPDD 002002 MulMuMulti-ti-purpurpurpospospose ce ce carrarrar y cy cy asesee - - -- -- - - - -- -TECECTEE MAAM TTT SilSilS icoicoicone ne ne rubbrubberbere drdrd ip ip matmatmat prprp oteoteotectscts woworkrk surrsurfacf eADDADDAD 0660666 BR-BR-BR-BR1-T1-T1-T1 ECECEC MouMousepseplanlane ffe for oror fl uflush sh tritrimmimmim ng ng ofof of glugluglue le le lineinees as andnd nd woowoowoodddSDCSDCSDC005005005555-B-BR1-T-TEC MououMousepsepsepplanlanla e re repleplaceaceac menment bt bladadladeee

Silicone rubber drip mat protects work surface. Size 200mm x 200mm x 1.75mm

Silicone drip mat

Multi-purpose carry case, can be used with gastec600, tec150, tec175, tec250 & tec800 series guns. Can also take the tecmat and other accessories.

Carry case

Mouseplane®

For the fl ush trimming of glue lines and wood, the Mouseplane® takes away the need for heavy duty sanding to remove dried glue or to level wood surfaces. It is a most useful tool for carpenters, builders, kitchen fi tters and cabinet makers.

It has the comfort and ease-of-use of a plane, combined with the sharpness and speed of a chisel.

Don’t forget to order your spare blade!

Accessories 12


Call us now for more information

Recycling!To reduce our impact on the environment our adhesives are often formulated using raw materials that have been harvested from sustainable, managed forests. Our packaging is recyclable and where possible made from recycled materials.

British made!We are a highly motivated, British based, ISO 9001 company. We source our components and raw materials from some of the best companies in the world. Over 90% of our products are manufactured in the UK.

Power Adhesives LimitedMr Lee Stegall, North America Sales Agent1209 Lilac Road, Charlotte, NC 28209, USAT: (704) 334 2425 F: (704) 334 2435 M: (704) 578 [email protected] www.poweradhesives.com

704 334 2425

Filename: Power Brochure 2012_Issue2_USA


power brochure 2012 issue1 english - home |...

Documents