340 Kaplan Drive l Fairfield, NJ 07004-6004973-227-4904 l FAX: 973-227-1651

Distribution Center l Carol Stream, IL 60188630-752-0600 l FAX: 630-752-0680

SANDBLAST HOSE

SERIES 4312 - 2-Ply

SERIES 4313 - Lightweight

SERIES 4314 - 4-Ply

“Rugged, economical hoses that can handle all of your tough cleaning applications.”

POWERING GLOBAL INDUSTRY

jasonindustrial.com

SANDBLAST HOSE 4312/4313/4314

4312 2-PLY SANDBLAST HOSEFor the conveyance of highly abrasive materials in sandblasting/cleaning and generalmaintenance in construction, shipyards, power plants and equipment rental. Highly abrasion resistant tube, abrasion and weather-resistant cover.

4312-0050-050 1/2 12.70 1.00 25.40 2 150 10.34 0.31 0.46 5.00 127.00 P

4312-0051-050 1/2 12.70 1.06 26.99 2 150 10.34 0.33 0.49 5.00 127.00 P

4312-0052-050 1/2 12.70 1.13 28.58 2 150 10.34 0.38 0.57 5.00 127.00 P

4312-0075-050 3/4 19.05 1.50 38.10 2 150 10.34 0.60 0.89 7.50 190.00 P

F Part I.D. O.D. Rein. Max W.P. Weight Min. Bend Radius StockF Number in. mm in. mm Plies PSI BAR lb/ft KG/m in. mm Item

4313 LIGHTWEIGHT SANDBLAST HOSEFor the conveyance of highly abrasive materials in sandblasting/cleaning operations. Lighter in weight than standard sandblast hose, but with the same high quality features. Utilizes couplings or nozzles made to fit 1-7/8” O.D. hose.

F Part I.D. O.D. Rein. Max W.P. Weight Min. Bend Radius StockF Number in. mm in. mm Plies PSI BAR lb/ft KG/m in. mm Item

4313-0125-050 1-1/4 31.75 1.88 47.63 2 150 10.34 0.83 1.24 10.00 254.00 P

4313-0125-100 1-1/4 31.75 1.88 47.63 2 150 10.34 0.83 1.24 10.00 254.00

4314 4-PLY SANDBLAST HOSEFor the conveyance of highly abrasive materials in sandblasting/cleaning operations used in construction, shipyards, steel mills and refineries. Highly abrasion resistant tube to handle manufactured coal slag, aluminum oxide or grit. Each O.D. is held to strict ARPM*tolerances for ideal coupling compatibility. Cover is abrasion & weather resistant.

F Part I.D. O.D. Rein. Max W.P. Weight Min. Bend Radius StockF Number in. mm in. mm Plies PSI BAR lb/ft KG/m in. mm Item

4314-0075-050 3/4 19.05 1.50 38.10 4 150 10.34 0.66 0.98 7.50 190.00 P4314-0100-050 1 25.40 1.88 47.63 4 150 10.34 0.80 1.19 10.00 254.00 P4314-0125-050 1-1/4 31.75 2.16 53.18 4 150 10.34 1.04 1.55 12.60 320.00 P

4314-0150-050 1-1/2 38.10 2.38 60.33 4 150 10.34 1.25 1.86 15.00 380.00 P4314-0200-050 2 50.80 2.88 73.03 4 150 10.34 1.45 2.16 20.00 508.00 P

4314-0075-100 3/4 19.05 1.50 38.10 4 150 10.34 0.66 0.98 7.50 190.00 P4314-0100-100 1 25.40 1.88 47.63 4 150 10.34 0.80 1.19 10.00 254.00 P4314-0125-100 1-1/4 31.75 2.16 53.18 4 150 10.34 1.04 1.55 12.60 320.00 P

4314-0150-100 1-1/2 38.10 2.38 60.33 4 150 10.34 1.25 1.86 15.00 380.00 P4314-0200-100 2 50.80 2.88 73.03 4 150 10.34 1.45 2.16 20.00 508.00 P

SANDBLASTHOSE

COUPLINGS

HOSE ENDUsed to make hose-to-hose

connections or hose-to-blast pot

connections.

NOZZLE HOLDERSAccepts the

male threaded end of a

sandblast nozzle.

THREADED POT ENDS

Connects to the combination air

and abrasive mix from the

sandblast pot.

*ARPM - Association for Rubber Products Manufacturers (Replaces RMA)

Hose Tolerances - all sizes have an O.D. tolerance of ±0.063”.

For all Jason sandblast hoses, the tube abrasion loss value is:

Acc DIN 53516 ≤ 60mm³