Pre-Installation guide

For all TopBrewer Compact 2014 forwardVersion: 1.0

Prepare for your TopBrewer. A comprehensive step-by-step installation guide is available through your dealer, authorized installer or our website, TopBrewer.com

This guide contains:

2 Space requirements3 Produtct specifications4 Cut out sheet5 Ventilation requirements: Natural convection or active fan

0% Bypass0% Bypass

Pure 50Active Coal

10000

Ventilation for air inlet 12 2/5 in2 (80cm2)

13/16” (20) 2 3/8” (60)

Water inlet

Electricity

18 9/16”(472)

2 13/16 (71)

30% Bypass

Pure 50

STRONG YES NO MILD CLEAN STOP ON/OFF

COFFEE ESPRESSO CAPPUCCINO COLD MILK HOT WATER

AMERICANO MACCHIATO LATTE WARM MILK STEAMING WATER

COLD WATER

SPARKLING WATER

670

mm

Idea

l 690

233 mm

Convection air outlet 80cm2

Shutoff valveWaste U-Pipe

430 mm

AC PowerHardwired or plugpoint,

see specifications

560

499

Alternative placement of shutoff valve next to filtersFilters can be mounted in an adjacent cabinet.

Active Coal

10000Pure 50

0% Bypass

30% Bypass

ICE-Bank Fridge

SPACE REQUIREMENTS

UNIT DETAILS

Installation Dimensions (WxDxH)

Packing Dimensions (WxDxH)

Weight, gross.

Weight, net.

Hopper Capacity

Milk carton size capcitiy (EU/US)

Dreg capacitiy

183 x 510 x 670 7 3/16” x 20 1/16” x 26 3/8”

300 x 630 x 780 11 13/16” x 24 13/16” x 30 11/16”

41.0 90.4

39.085.9

1.53.3

-

60

TopBrewer Machine

137 x 130 x 267 5 3/8” x 5 1/8” x 10 1/2”

(per filter, installed)

379 x 284 x 16514 15/16” x 11 3/16” x 6 1/2”

3.78.15

-

-

-

-

Filter Kit

236 x 560 x 430 9 5/16” x 22 1/16” x 16 15/16”

300 x 615 x 490 11 13/16” x 24 3/16” x 19 5/16”

27 59.5

2555,1

-

2 l.Half Gallon

-

ICE-bank Fridge

* cm / kg / liter - inches / pounds / gallon

TopBrewer Machine• TopBrewer, Faucet, mounting bracket, recessed

driptray with grate, quick start guide, cleaning brush, cleaning tablets

ICE-bank Fridge• ICE-bank Fridge, Milk pump system, connections to

TopBrewer, MilkSpear, Co2 Double manometer

Filter Kit• 2 x TopBrewer Pure 50 filter, 1 x ActiveCoal 10000,

tubes, all fittings and connections, one way safety valve, mounting diagram.

WHAT’S IN THE BOX?

ACCESSORIES

• High-Gloss Stainless tap • Brass tap, polished • Cobber / Patina tap • iPad in-counter

mounting system

• Tabletop Driptray• Driptray w/lip

Plug-type EU: Local 230V US: 6-20R / 6-20P

EU: Local 230V US: Local 110V

Direct Water Connection. Water pressure: 200kPa (2 Bar) - 600 kPa (6 Bar)

FiltrationTopBrewer Pure Filtration kit provides the best

water quality and easy installation

Ventila-tion

Machine and fridge produces heat, which needs to be able to exit as per installation instructions.

Machine also needs a cut-out in the base.

Power208-240V AC, 10/20

Amp 1 phase, 2,3 / 4,6 kW, 50/60hz

TopBrewer

220/110V AC, 4 Amp, 50/60hz

ICE-bank Fridge

Drainage 1 x Waste U-pipe -

INSTALLATION REQUIREMENTS

Water

* Optional recessed iPad mount

SPACE REQUIREMENTS

Faucet and driptray placement

CUT OUT SHEETFOR FAUCET AND DRIPTRAY

VENTILATION REQUIREMENTS

NATURAL CONVECTION

If the cabinet design allows, natural convection can be achived by allowing cold air to pass through the bottom of the cabinet and hot air out through the top.

Requirements:

• Min. 80 cm2 inlet or outlet• Either inlet can be chosen• Either outlet can be chosen, as long as hot air can escape

Maximum 35 oC / 95 oF operating temperature, measured in the top of the cabinet

Allow both TopBrewer and fridge clearance to ensure airflow. The clearances are included in the specified measurements on page 2.

Inlet through toekick grate (4302223) Recess behind door

Overall Requirements:

ACTIVE FAN

Outlet fan mounted alongside the machine.

If natural convection requirements cannot be met, it is recommended that our active fan solution is chosen.

Air inlet of min. 40 cm2, placed on the backside of the fridge

A dividing panel is inserted, seperating the toekick in two equal sized spaces

A toekick grate (4302223) or similar can be used to cover the cutout in the base. Minimum requirements, 80cm2