pre-milled abutments complete solutions · back in 2012 dess produced the first pre-milled blanks...
TRANSCRIPT
PRE-MILLED ABUTMENTSCOMPLETE SOLUTIONS
DESS becomes the reference again when it comes to dental CAD CAM solutions
The DESS proprietaryholder system has severaladvantages to othersolutions:
Quick ”screw-on” systemwhere the pre-milled blanksare attached to the subholderoutside the machineand then placed in the holderthat remains in the machine.
Much cleaner and faster.
Also, due to the unique wayof “pull down and lock”holding system per pre-milledblank, the maximum precisionand stability during themilling process is achieved.
Pre-milled socket positionsand sub-holders are laseridentified to better ensurewhat is where and optimisethe milling process.
Back in 2012 DESS producedthe first pre-milled blanksbut the market was not readythen yet.In the recent years, however,both in-house millingmachines and the cad camsoftwares have improved andmade feasible the in-houseproduction of customisedabutments using thesesolution.
So now DESS offersa full assortment of Titaniumgrade V and Cobalt Chromepre-milled blanks andoptimise the milling processwith the known quality of theDESS standard abutments.
The blanks works togetherwith holder systems speciallydeveloped for Imes-Icore®
VHF® machines, ZirkonZahn®
wet mill, Yenadent® and auniversal holder for any othermachine that use standard98 mm discs.
1
The materials used are the finest Titanium Grade V ELI (extra low intersticial) or also called Grade 23, and the exclusive Micro Melt Cobalt-Chrome.
This Cobalt-Chrome alloy has several advantages to others available to the market. First of all it has no internal tension so however radical the design is, the final custom abutment will preserve the shape along the process and result in less risk for ceramic cracks.
This alloy is also easier to mill than other Cobalt-Chrome solutions which will preserve your tools. Last but not least we can provide you with the exact thermal expansion coefficient to assure the highest level of quality on your final work.
The pre-milled blanks are a reference of a wise and reliable solution:
A total millable length of 20 mm makes it one of the
longest in the market.
Minimal gingival transition height,
just 0,3 mm to allow a maximum degree of design freedom.
Two diameters: 10mm / 14mm for Titanium
14 mm for Cobalt-Chrome
“Pull down and lock” holding system.
Developed by DESS back in 2012, allows a strong and precise
positioning of the pre-milled blank inside its socket
The superb quality and fitting connection to implant, trademark
of DESS for almost 10 years.
2
ref. 61.xxx 10mmref. 62.xxx 14mm
ref. 71.xxx
ref. 63.xxx
PRE-MILLED Titanium and CoCr Blanks allow the
creation of one-piece customized abutments using in-house milling equipment. High
quality as well as an accurate connection fit is guaranteed.
Today’s CAD/CAM technology offers various possibilities to save both,
time and costs,
optimising the work-flow from the intra-oral scan, to designing and milling
the single crown; without the necessity of
preparing a working model.
The flexibility to choose from different implant connections
and platforms is another advantage when preferring to work with
DESS pre-milled titanium and Cobalt-Chrome blanks.
DESS pre-milled abutments are also included in the softwares of
Hyperdent, WorkNC, Sum3D and Dental Softworks
Pre-milled Ti
Pre-milled CoCr
Blocks
3
4
ø10mm 61.011 61.012 61.013
ø14mm 71.011 71.012 71.013
3.5 4.1 5.1
Ti
CoCr
ø10mm 61.068 61.041 61.042 61.069
ø14mm 62.041 62.042 62.069
ø14mm 71.068 71.041 71.042 71.069
Ti
CoCr
ø10mm 61.004 61.005 61.006 61.097
ø14mm 62.005 62.006 62.097
ø14mm 71.004 71.005 71.006 71.097
Ti
CoCr
ø10mm 61.001 61.002 61.003
ø14mm 71.001 71.002 71.003
3.0 NP RP WP
External Hex USA3i Osseotite€®
Active HexNobelActive® NobelReplace® CC
Tri-LobeNobel Replace SelectTM
PURPLE3.4
BLUE4.1
YELLOW5.0
3.OPURPLE3.5
YELLOW4.3-5.0 WP
PURPLE3.5
YELLOW4.3
BLUE5.0 6.0
Ti
CoCr
External Hex UniversalNobelBranemark®
ø10mm 61.014 61.015 61.016
ø14mm 62.015 62.016
ø14mm 71.014 71.015 71.016
Ti
CoCr
Internal Hex “CLICK”3i Certain®
PURPLE3.4
BLUE4.1
YELLOW5.0
ø10mm 61.070 61.009 61.045
ø14mm 62.009 62.045
ø14mm 71.070 71.009 71.045
Ti
CoCr
ø10mm 61.043 61.044
ø14mm 62.043 62.044
ø14mm 71.043 71.044
Ti
CoCr
NP RP WP
OctagonStraumann® Soft Tissue Level & synOCTA®
NNC3.5
RN4.8
WN6.5
Conical BLStraumann® Bone Level
NC3.3
RC4.1
ø10mm 61.062
ø14mm 62.063
ø14mm 71.063
TiTiTiTiTiTi Ti
CoCr
RB4.5
WB5.7
Conical BLXStraumann® BLX
PRE-MILLED BLANK
ø10mm 61.023 61.024 61.025
ø14mm 62.024 62.025
ø14mm 71.024 71.025
ø10mm 61.059 61.060 61.061
ø14mm 62.059 62.060 62.061
ø14mm 71.059 71.060 71.061
CoCr
Ti
Internal Hex ConicAstra Tech OsseospeedTM
NP3.0
AQUA3.5-4.0
LILAC4.5-5.0
Ti
CoCr
Conic EVOAstra Tech Implant SystemTM EV
PURPLE3.6
YELLOW4.2
BLUE4.8
ø10mm 61.038 61.039 61.040 61.071
ø14mm 62.039 62.040 62.071
ø14mm 71.038 71.039 71.040 71.071
ø10mm 61.250*
ø14mm 71.250*
Ti
CoCr
Ti
Internal Hex FDDentsply friadent® XIVE®
Internal ANKAnkylos® C/X
CoCr
SILVER3.4
YELLOW3.8
BLUE4.5
RED5.5NP RP WP
ø10mm 61.072 61.073
ø14mm 62.072 62.073
ø14mm 71.072 71.073
ø10mm 61.064 61.065 61.066 61.067
ø14mm 62.065 62.066 62.067
ø14mm 71.064 71.065 71.066 71.067
Ti
CoCr
YELLOWMINI
GREENREGULAR
Ti
Internal CAMCamlog®
CoCr
SILVER3.3
YELLOW3.8
PINK4.3
BLUE5.0
NP RP WP
ø10mm 61.017 61.018 61.019
ø14mm 62.017 62.018 62.019
ø14mm 71.017 71.018 71.019
Ti
CoCr
Internal Hex USAZimmer Abutmentschrauben-vent®
GREEN3.5
PURPLE4.5
YELLOW5.7
ø10mm 61.035
ø14mm 62.035
ø14mm 71.035
Ti
CoCr
Ti
CoCr
Ti
CoCr
Ti
CoCr
Ti
CoCr
Ti
CoCr
Ti
CoCr
NEO GMNeodent Grand Morse®
Conic ossOsstem® TS
5
142
ø10mm 61.099 61.087 61.088 61.089
ø14mm 62.088 62.089
3.0 3.5 4.5 5.7Internal Hex BHBiohorizons®
Ti
ø10mm 61.074 61.075 61.076
ø14mm 62.074 62.075 62.076
ø14mm 71.074 71.075 71.076
CoCr
Ti
Internal CONConelog® 3.3 3.8 5.0
ø10mm 61.056 61.095 61.096
ø14mm 71.095 71.096
ø10mm 61.020 61.021 61.022
ø14mm 71.021 71.022
Ti
Ti
CoCr
Internal Hex MIMIS® Seven
PURPLESTD
GREENWIDE
External Hex BHBiohorizons®
GREEN4.2
BLUE5.2
NP RP WP
CoCr
ø10mm 61.056 61.095 61.096Ti
YELLOW PURPLE GREENConic MCMIS® C1
ø10mm 61.084 61.082Ti
BLUE PURPLEConic MVMIS® V3
ø10mm 61.057
ø14mm 71.057
Ti
CoCr
Conic ANYRMegagen AnyRidge®
NP RP WP
ø10mm 61.077Ti
Conic AxioAnthogyr Axiom®
ø10mm 61.080
ø14mm 62.080
ø14mm 71.080
CONIC ICMedentis ICX®
Ti
CoCr
ø10mm 61.090
ø14mm 71.090
Ti
CoCr
Conic DENTDentium SuperlineTM & Implantium® 3.8
6
15mm 63.020
15mm 63.040
15mm 73.020
15mm 73.040
L 20 mm
L 20 mm
HLDSTD HLDIMES HLDVHF HLDVHFR5 HLDYENA
HLD3RHLDVHFN4 HLDVHFZ4
HLDZZ
Ti
CoCr
L 40 mm
L 40 mm
ø10mm 61.091 61.092 61.093 61.094
ø14mm 62.094
ø14mm 71.094
Ti
CoCr
Internal SEMBego Semados®
GREEN/BLUE SILVER RED YELLOW
NP RP WP
ø10mm 61.078
ø14mm 71.078
Conic BioBiotech Kontact®
Ti
ØA ØB ØC L1 L2 L3 R
MT3D16L5 3 1,6 0,95 5 51 0,5 0,1
MT4D16L5 4 1,6 0,95 5 51 0,5 0,1
MT6D16L5 6 1,6 0,95 5 51 0,5 0,1
L2
L3
L1
ØBØCØA
R
for standard 98mm disc machines
for Imes-Icore® machines for VHF® for VHF® for Yenadent®
Any milling machine with a 98 mm disc holder
Coritec 245i touch Coritec 250i touch Coritec 350i / 350i LoaderCoritec 450iCoritec 550iCoritec 650i / 650i Loader
VHF® S1VHF® S2VHF® K5
VHF R5 D6D15D43N
for VHF® for VHF® for machines with support/changer 3R, Yenadent® D14P & others
VHF® N4 VHF® Z4 D14P DC40D43N
Adaptadores para máquinas ZirkonZahn
M1 abutmentM1 wet heavy metal M5 heavy metal M6 wet heavy metal
For M4 - ZZ can make you a holder for the HLDZZ
HOLDERS
Adaptors for ZirkonZahn® holders
NEW
Blocks
NEW
7
Contact your VHF reseller to purchase
Contact your VHF reseller to purchase
Contact your VHF reseller to purchase
Contact your VHF reseller to purchase
6