precision / quality /service naturally - maplecraft...
TRANSCRIPT
Consistently setting the industry standard for quality cabinet doors
PRECISION / QUALITY /SERVICE
Naturally
October 2011
Naturally
Door Designs
4
Tongue & groove joint / flat panel
1
33
BalmoralB
83mm
2831
AJBancroft
83mm
27 Belmont33
A
57mm
Concord31
T
76mm
23
32 AFCrawford
70mm33
E
83mm
Edinburgh32 C
57mm
18Laurentian
32 F
70mm
Lexington
33
LincolnD
57mm33 U
57mm
Phoenix Prairie33 AT
57mm
1933
AWindsor
57mm
Your design options are given greater variety by the selection of doors we can offer. You can have confidence that best-built
doors by MapleCraft will back up your reputation.
5
Tongue & groove joint / raised panel
2
11 AR
76mm
5Ashton 1”
57D
83mm
29
Burgoyne Imperial02
A
57mm
15 92 SW
89mm
5
Lake�eld
Newton12
A
57mm
12
Princeton07
A
57mm
25Royal
02A
57mm
15
Traditional12 A
57mm
12
20H
57mm
13Trenton
02 A
57mm
15Valencia
52E
Viceroy
76mm
36 NZ
90mm
34Wyndham
Revised: 2012/10/12 10:09
related stresses.
6
Mitred joint / Flat Panel
3
Aurora33 BV
73mm
Belair33 BU
84mm
Bridgeport33 H M1
57mm
Candida33 CM
74mm
Classic33 J
73mm
Hanover33 Q
73mm
Harington33 L
76mm
28Kensington
33 K73mm
Prestwick33 R
70mm
Selkirk33 HV
72mm
Stratford33 M2
70mm
Virginia33 AQ
64mm
The warmth of wood in your project is backed by our superior construction standards. We can provide an extensive
selection of wood species to enhance the look of your project.
Mitred joint / Raised Panel
Specialty Doors
Olive Ash Burl PanelCaning Panel Special Cut Veneer Regina
4
20V
70mm
Brunswick 24BV
Buena Vista
73mm
20 CambridgeJ
73mm
92CM
Churchill
74mm
07
Q
Dorset
73mm
49L
76mm
28Hampton26
KingstonK
73mm
78
BU84mm
Malibu
5
Applied Moulding
96 12 D
Moulding on top and bottom only
Camden
70mm33
3
70mm
Grantham
Savannah95 5
76mm
47Sherbrooke
1HN
64mm
20
Siena52 1
B
89mm
3315
M157mm
CatalinaD
AE33
#8 rope
J73mm
Jackson
332
Richmond
70mm
19D 33
Salisbury
70mm
RM
#8 rope
D
Sheridan07 10 rope
70mmMN
Stamford 1/4"
33 12
70mm
D
Vienna07 9 rope
64mmMA
Door Construction Standards**Note: Soft Maple specie available in Paint grade only. Doors higher than 122 cm (48”) or wider than 61 cm (24”) are made with a cross-rail for warranty purposes. If requested without cross-rail, warranty will not apply.
REGULAR “A” GRADE (MapleCraft’s hallmark quality grade)• This product is designed to allow a broader range of colours and a broader range of natural wood characteristics• This grade is recommended for medium colour finishes• There will be a more noticeable colour variation in the panel match than what will be seen in our select grade• More colour variation will be allowed between panel and framing than “AA”• Noticeable curly or flame grain will be allowed on the face of this product• Wood character marks on face will be small in size (< 15 mm length) and quantity (not more than 3 per .9 sq. m) Defects
such as cracks or shake in wood are not permitted unless they can be repaired in a way that does not detract from the overall appearance of the product
• Water stain will be permitted if it is very light and blends well with the overall appearance
SELECT “AA” GRADE (MapleCraft’s highest quality grade; includes 15% select charge)• This product is designed to give minimal variations in colours and minimal amounts of natural wood characteristics• Select grade is recommended for clear or light colour finishes• The panel laminations will be selected so that the colour match does not distract from the overall appearance • The colour match between the panel and the framing may vary slightly• Curly or flame graining will be permitted on the face if it is not more than slightly noticeable and colour variation is
minimal; this will be permitted on the back of the panel and not limited by amount nor colour• Wood character marks (mineral, gum, sap, knots, non-uniform grain) will be strictly controlled in size and quantity so
they blend well within the product• Water stain will not appear on the face
General Specifications for Wood Doors • Machining of all parts: +/- 0.5 mm tolerance• Cracking - not allowed• Chipping - no noticeable chipping on visible surfaces• Dents – not allowed• Laminations in centre panel - 38 mm (1.5”) – 102 mm (4”) in width with smaller strips kept to the outside• Putty repair – areas no greater than 2 mm in width and 5 mm in length will be allowed
Conditions Insect /disease damage Minimal allowed AllowedGrain swirls, spikes, rays Minimal allowed AllowedMineral streaks(Maple, Oak) None allowed Up to 5 cm (2”)Mineral streaks (Cherry) Some light (6 mm X 26 mm max.) Allowed (7 cm max.)Knots Some pin knots (1 mm) Allowed (2 mm max.)Sap None allowed AllowedRot None allowed Very minor allowedVeneer joints Tight Minor open sectionsVeneer feathering None allowed Some minor allowedVeneer grade “A” or “AA” “A” or “B”
TolerancesWarp 1 mm (1/16”) allowed on rails or stiles measuring 45.7 cm (18”) 2mm (3/32”) allowed on rails or stiles measuring 46 cm – 102 cm 3mm (1/8”) allowed on rails or stiles measuring longer than 102 cmTwist Twist on doors measuring 56 cm X 122 cm (22” X 44”) or equivalent will not exceed 3 mm
(1/8”) – doors exceeding that measurement will not have twist exceeding 4mm (3/16”)
Front Back
PAINT GRADE• Paint grade specified products are manufactured in Soft Maple as standard• This material is unselected for colour. Recommended for opaque finishes only
6
We will provide best quality products built to your satisfaction backed by a two year warranty against material defect and faulty workmanship according to the standards of construction requested by the customer.
Our Commitment
PRECISION / QUALITY / SERVICE
N449 Eastchester Avenue, St. Catharines, Ontario L2M 6S2Telephone: 905-688-5781 Fax: 905-688-1731
E-mail: [email protected] Web: www.maplecraftdoors.com
Other Products Available: * Curved Mullions * Hood Facads * Dove Tail Drawer Boxes * Curved Valances * and more.......