prefarbrication partner

VICTAULIC, YOUR PREFABRICATION PARTNER

VICTAULIC, YOUR PREFABRICATION PARTNER

PRE-CONSTRUCTION

Information Required

• Schematic drawing• Layout drawing• Technical datasheets

3D Design

• Full 3D model in Revit• Drawing layout “For Approval”

Advanced Bill of Material

• Early stage Bill of Quantities• Avoid delivery problems

• Estimation pricing package

Pre-Fabrication Options

• Loose Cut Lengths

DESIGN BID

Refrigerant

lbs (kg) Total Weight

(inc. Refrigerant) lbs (kg) Water Volume gal (l) Center of Gravity ins (mm)

Evap Cond X Y Z

Operating 635

(288)

11806 (5355)

61 (233)

56 (213)

50 (1278)

37 (945)

20 (510)

Shipping 10823 (4909)

- (-)

- (-)

50 (1267)

37 (943)

21 (533)

4. 2.5 in. (64 mm) diameter lifting holes are provided. See installation manual for lifting instructions. 5. All water connections are given in standard U.S. pipe sizes. Standard connections are suitable for welding or grooved couplings. 6. Vibration isolator pads are provided for field installation (0.25 in (6 mm) thick when loaded). 7. If main power wiring is brought up through the floor, this wiring must be outside the envelope of the unit. 8. The shipping skid adds 4 in. (105 mm) to the overall unit height. 9. Dimensions shown are for units with standard 150 psi (1034 kPa) design water side pressure. Check factory for unit dimensions with higher pressures. 1. 1 in. (25 mm) FPT evaporator and condenser relief valves must be piped per ANSI/ASHRAE 15.

2. At a minimum, length of tube sheet to tube sheet dimensions is required at either end for tube removal, 36 in. (914 mm) is required at other end and each side and top for service. 3. Final connections must allow for 0.5 in. (12.7 mm) manufacturing tolerance.

Product Drawing Unit Tag: Centrif 004 Sales Office: McQuay UK Operations Product: Water Cooled Centrifugal Chiller Project Name: Selfridges Sales Engineer: James Henley Model: WSC087M/E2609-2RB/C2209-2RB Date: 23/02/2015 Ver/Rev: Sheet: 1 of 5 Scale: NTS Tolerance: +/- 1.0” Dwg Units: in (mm) WSC087MAU47GYYLBE2609BE2RBC40446CCYAC2209CLYY2RBYYYC40965CCYYYYAA134064EY2LEYYAVLWYYYYY0534YM2B1YAXS31AB0502YPYYYYM0AYW000000000000JDNNNN No change to this drawing may be made unless approved in writing by McQuay UK Ltd. Purchaser must determine that the equipment is fit and sufficient for the job specifications

Product Drawing Unit Tag: Centrif 004 Sales Office: McQuay UK Operations Product: Water Cooled Centrifugal Chiller Project Name: Selfridges Sales Engineer: James Henley Model: WSC087M/E2609-2RB/C2209-2RB Date: 23/02/2015 Ver/Rev: Sheet: 2 of 5 Scale: NTS Tolerance: +/- 1.0” Dwg Units: in (mm) WSC087MAU47GYYLBE2609BE2RBC40446CCYAC2209CLYY2RBYYYC40965CCYYYYAA134064EY2LEYYAVLWYYYYY0534YM2B1YAXS31AB0502YPYYYYM0AYW000000000000JDNNNN No change to this drawing may be made unless approved in writing by McQuay UK Ltd. Purchaser must determine that the equipment is fit and sufficient for the job specifications

victaulic.com 06.23 7470 Rev C Updated 11/2015 © 2015 Victaulic Company. All rights reserved.

ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.

2 - 12"/50 - 300 mm

1.0 PRODUCT DESCRIPTIONAvailable Sizes• 2 – 12"/50 – 300 mmPipe Material

• Carbon steel, Stainless steelMaximum Working Pressure• Accommodates pressures ranging from full vacuum (29.9 in Hg/760 mm Hg) up to 750 psi/5171 kPa.

• Working pressure dependent on material, wall thickness and size of pipe.

Operating Temperature• Dependent on gasket selection from section 3.0.Function• Joins carbon steel and/or stainless steel pipe.• Provides a rigid pipe joint designed to restrict axial or angular movement.

Pipe Preparation• Cut or roll grooved in accordance with Submittal 25.01: Victaulic Standard Groove Specifications.

Codes and Requirements• Hanger support spacing corresponds to ASME B31.1 Power Piping Code and ASME B31.9 Building Services

Piping Code. 2.0 CERTIFICATION/LISTINGS

NOTES• See Submittal 10.01: Victaulic Products for Fire Protection Piping Systems - Regulatory Approval Reference Guide for details.

• See Submittal 02.06: Victaulic Potable Water Approvals ANSI/NSF for potable water approvals if applicable.

Victaulic® QuickVic™ Rigid CouplingStyle 107N

06.23

1

System No.LocationSubmitted By

Date Spec SectionParagraphApproved

Date

Rev :

Checked by :

Drawn by : Date :

Drawing number :

All Victaulic drawings and piping engineering submittals will be based on information furnished tous and is provided solely as an aid to procurement and installation. The Victaulic Company is not

responsible for design by engineer of record, erection, or operation. Liability of Victaulic Company withreference to descriptions, lengths, locations, dimensions, or any other data shown herein is limited to the

amount charged by Victaulic Company for producing the drawing in question. In the event of an order,Victaulic products must be used in accordance with published specifications and Victaulic literature.

NOTE: Contractor to field verify all equipment configurations, nozzle locating dimensions andelevations for conformance to Victaulic layout drawing(s) PRIOR TO CUTTING PIPE. Please notifyVictaulic Construction Piping Services Division for recommendations regarding any deviations.

Date :

Sheet :

SELFRIDGES & Co

Chiller RoomTotal - Isometric Views

15-76209 _ 05 _ Total 2-2

L. Luypaert

P. Janssens

REV 0

18/06/2015

18/06/2015

CD-Total2-2

Total isometric view

Detail secondarychilled water pumps

Detail condenserwater pumps

Detail Primary chilledwater pumps

Detail chillerconnections

Victaulic check valve

Victaulic butterfly valve

Non - Victaulicactuated valve

Victaulic wye strainer


Victaulic butterfly

valve

Victaulic wye

strainer

Victaulic butterfly

valve


Victaulic butterfly

valve

Victaulic wye

strainer

Victaulic butterfly

valve

Victaulic wye

strainer

Victaulic butterfly

valve


CH - 01

CH - 02

CH - 03

CH - 04

PP - 01

PP - 02

PP - 03

PP - 04

CP - 01

CP - 02

CP - 03

CP - 04

ADS - 01

SP - 06/07

SP - 01

SP - 05

SP - 02

SP - 04

SP - 03

Heat meters

Heat meter

No. Description Issued by Date

1 Revision 1 Date 1

Info Customer :

Schematic drawingLayout drawing

Technical Datasheets

ABOM :

Early stage BOQAvoid delivery problems

3D Design + Drawings for approval :

Full 3D model in RevitDrawing layout “ For Approval “

Pre-Fabrication service:

Increase productivity on site

Construction BOM + Cut lengths

BOM’s/ Cut lengths by area for ordering/pre-fabrication purpose

Area 1

Project meeting

Reality check structural & civil

situation

Victaulic Inspection Service

M to M - Metal to MetalTR - Torque requirement

Positive - Positive Offset rigid couplings

Fabrication Service Explanation - REV015/12/2015

Victaulic Fabrication Cell

Pre cut pipesVicSticks: Pre installed fittings

Cut Lengths

• Fabrication Spools

• Skids / Modules

Fab Spools

Prefabrication

CONTRACTOR DELIVERY

CONSTRUCTION

3D Drawings for Approval Victaulic Fabrication Spools

• Pre-cut pipes• Pre-installed fittings & valves

Skids / Modules

Info Customer :



ABOM :








Area 1

Project meeting


situation







Info Customer :



ABOM :








Area 1

Project meeting


situation







Info Customer :



ABOM :








Area 1

Project meeting


situation







Info Customer :



ABOM :








Area 1

Project meeting


situation







Info Customer :



ABOM :








Area 1

Project meeting


situation







• BOMs / Cut lengths by area for ordering / pre-fabrication purpose

Koelmachine 2

Koelmachine 1

TSA

Koeltoren 1

Koeltoren 2

1880

133

44

1503

419

578

513

584

943

1405

798

330

286

367 702

285

1292

375

608 522

296

13

B

845

1600

1600

895

1600

2000

680 2400 680

4940

3760

Rev :

Checked by :

Drawn by : Date :

Drawing number :

All Victaulic drawings and piping engineering submittals will be based on information furnished to usand is provided solely as an aid to procurement and installation. The Victaulic Company is not responsible

for design by engineer of record, erection, or operation. Liability of Victaulic Company with reference todescriptions, lengths, locations, dimensions, or any other data shown herein is limited to the amount

charged by Victaulic Company for producing the drawing in question. In the event of an order, Victaulicproducts must be used in accordance with published specifications and Victaulic literature.

NOTE: Contractor to field verify all equipment configurations, nozzle locating dimensions andelevations for conformance to Victaulic layout drawing(s) PRIOR TO CUTTING PIPE. Please notify

Victaulic Construction Piping Services Division for recommendations regarding any deviations.

Date :

Sheet :

St.60 Bodem

St.41 Flens Adapter Nippel

St.741 Flens Adapter

St.716H Terugslagklep

St.732 Y - Filter

St.761 MS Vlinderafsluiter Hendel

St.761 MS Vlinderafsluiter Tandwielkast

St.10 Bocht 90°

St.11 Bocht 45°

St.20 T - Stuk

St.25 Reduceer T - Stuk

St.50 Concentrisch Verloop

St.107 / 07 Rigide Koppeling

St.177 / 77 Flexibele Koppeling

Victaulic product legende :

WillemswerfRotterdam

Techniekruimte Koeling( Isometrisch aanzichten )

15 - 76554 _ 02 _ MP01

M. Filek

P. Janssens

REV 0

15 / 01 / 2016

F

15 / 01 / 2016

A0 - MP01St.7340 Meetflens (Oventrop)

DETAIL VERDELER KOELTORENS

DETAIL KOELMACHINE 1

DETAIL POMPEN

DETAIL TSA DETAIL KOELMACHINE 2

DETAIL KOELTORENS OP STAALCONSTRUCTIE

Gekoeld water aanvoer

Gekoeld water retour

Condenser wateraanvoer

Condenser water Retour

No. Description Issued by Date

Com pany F lam co b.v.Type F lam c o Clean F400c apa city 7 31 ltro rder_code 2 8198m ax. pressure 1 0 bard iam eter 800w idth 1220h eight 1810c onnec tion D N400

R

S

T

Q

293031Rev :

Checked by :

Drawn by : Date :

Drawing number :

Date :

Sheet :

SELFRIDGES & Co

Chiller roomBag & Tag area 1

Bag & Tag area 1 - Chillers

CD - BT1

18/06/2015

18/06/2015

REV 0

P. Janssens

L. Luypaert

All Victaulic drawings and piping engineering submittals will bebased on information furnished to us and is provided solely as an aid to

procurement and installation. The Victaulic Company is not responsible fordesign by engineer of record, erection, or operation. Liability of Victaulic

Company with reference to descriptions, lengths, locations, dimensions, orany other data shown herein is limited to the amount charged by VictaulicCompany for producing the drawing in question. In the event of an order,

Victaulic products must be used in accordance with publishedspecifications and Victaulic literature.

NOTE: Contractor to field verify all equipment configurations,nozzle locating dimensions and elevations for conformance to Victauliclayout drawing(s) PRIOR TO CUTTING PIPE. Please notify VictaulicConstruction Piping Services Division for recommendations regardingany deviations.

Issued by DateNo. Description

BAG & TAGAREA 1

-CHILLERS

CONTACT INFORMATIONUnits B1 & B2, SG1 Industrial ParkCockerell CloseGunnels Wood RoadStevenageHertfordshire, UKSG 1 2NB44 1438 310 [email protected]

WHO WE ARE VICTAULICSince 1919, Victaulic has been world’s leading producer of grooved mechanical couplings and pipe-joining systems. Used in the most demanding markets, Victaulic innovative piping technologies put people to work faster while increasing safety, ensuring reliability and maximizing efficiency. The company has 15 major manufacturing facilities, 28 branches worldwide and over 3,600 employees who speak 43 languages across the globe. With more than 1900 active global patents, Victaulic solutions are at work in 115 countries across diverse business lines including oil and gas, chemical, mining, power generation, water and wastewater treatment, military and marine, as well as commercial building and fire protection. Visit www.victaulic.com and follow us on LinkedIn, Facebook, Twitter, and YouTube.

VICTAULIC

prefarbrication partner

Documents