pressurized water reactor ( pwr) Водо-водяной энергетический...
DESCRIPTION
Pressurized water reactor ( PWR) Водо-водяной энергетический реактор (ВВЭР). Power transfer. Power transfer in PWR. Nuclear fuel in the reactor vessel is engaged in a fission chain reaction, which produces heat, heating the water in the primary coolant loop. - PowerPoint PPT PresentationTRANSCRIPT
Pressurized water reactor (PWR)Водо-водяной энергетический реактор
(ВВЭР)
Power transfer in PWR
• Nuclear fuel in the reactor vessel is engaged in a fission chain reaction, which produces heat, heating the water in the primary coolant loop.
• The hot primary coolant is pumped into steam generator.• Heat is transferred to the lower pressure secondary coolant where it
evaporates to pressurized steam.• The pressurized steam is fed through a steam turbine which drives an
electrical generator connected to the electric grid for distribution.• After passing through the turbine the secondary coolant is cooled down
and condensed in a condenser.• The condenser converts the steam to a liquid so that it can be pumped
back into the steam generator.
Передача энергии в ВВЭР
• Ядерное топливо в реакторе участвует в цепной реакции деления, которая производит тепло, используемое для нагревания воды первого контура.
• Горячий теплоноситель первого контура поступает в парогенератор.• Тепло передается теплоносителю второго контура с более низким
давлением, где он (теплоноситель) превращается в пар.• Пар поступает в паровую турбину, которая вращает электрический
генератор, связанный с распределительной электрической сетью.• После прохождения через турбину теплоноситель второго контура
охлаждается и конденсируется в конденсаторе.• В конденсаторе пар превращается в воду, так что она может
поступить обратно в парогенератор.
Construction of PWR
Coolant (Теплоноситель)
Moderator (Замедлитель)
• PWRs require the fast fission neutrons to be slowed down (a process called moderation) in order to interact with the nuclear fuel and sustain the chain reaction.
• The coolant water is used as a moderator by letting the neutrons undergo multiple collisions with light hydrogen atoms in the water, loosing speed in the process.
Control (Управление)
• Control rods are used to maintain primary system temperature at the desired point.
• The reactor control rods, inserted through the reactor vessel head directly into the fuel bundles, are moved for the following reasons:
to start up the reactor; to compensate for nuclear poison inventory; To compensate for nuclear fuel depletion.