procedure editor 15.05.2015 12:36. procedure editor 15.05.2015 12:36 „enable sampletrack“...
TRANSCRIPT
18.04.23 15:46
Procedure Editor
18.04.23 15:46
Procedure Editor
„Enable SampleTrack“ checked means:- Orders created with SampleTrack program„Enable SampleTrack“ unchecked means:- Working without SampleTrack- Define orders in the „Create order dialog“
This button is used to change the procedure export directory path.
Check the correct procedure export path. The directory contains all procedures for the „Create order dialog“ window.
18.04.23 15:46
Procedure Editor
Open the procedure editor dialog
The procedures can be defined here and will be used later to set up orders within the following applications:
• PrepGilsonST „Create order dialog“ • SampleTrack• BEST application
18.04.23 15:46
Procedure Editor
Procedures defined and saved here…
… can be selected later in the „Create order dialog“ .
1a. Using Procedure in Order files
18.04.23 15:46
Procedure Editor
Placeholder variables for SOURCE Samples defined here…
… can be selected later when setting up orders in the „Create order dialog“ .
1b. Using Procedure in Order files: Source
18.04.23 15:46
Procedure Editor
Dispenses defined here…(the DESTINATION position variable in the Order file will be used!)
… can be selected later when setting up orders in the „Create order dialog“.
1c. Using Procedure in Order files: Destination
18.04.23 15:46
Procedure Editor
Placeholder variable for a Dilutor/ValveMate solvent defined here…(selection „##$SOLVENT Variable in Order “)
… can be selected later in the „Create order dialog“.
1d. Using Procedure in Order files: Dilutor Solvent
18.04.23 15:46
Procedure Editor
Procedures of the type „Bruker“ cannot be saved. The button „Save“ is gray.
Save the procedure with the button „Save As“ and use a different personal name like „my procedure“.
Open the „Saved as“ procedure. It has the custom symbol and can be modified and saved.
2. Procedure Difference: „Bruker“ / „Custom“
18.04.23 15:46
Procedure Editor
After opening the new procedure it will be displayed as a „Custom“ procedure.
2a. View „Custom“ Procedure
18.04.23 15:46
Procedure Editor
Use this button to load procedures (only for procedures of type „ADD“)
2b. Open Procedure
18.04.23 15:46
Procedure Editor
Click on the “Source Type“ of any line to select it and show all values in the line edit area.
3. Show Procedure Values
18.04.23 15:46
Procedure Editor
4a. Edit the Source Type „Solvent at Dilutor“
2. Press the button „Update“ to set the new values in the selected line.
1. Enter the parameters for the solvent at the Dilutor / ValveMate.
18.04.23 15:46
Procedure Editor
Select the solvent name from the list.
Hint: For each solvent name in the list the position on the ValveMate is predefined in the configuration.
4a. Edit the Source Type „Solvent at Dilutor“
18.04.23 15:46
Procedure Editor
4b. Edit the Source Type „Gas Gap“
2. Press the button „Update“ to set the new values in the selected line.
1. Enter the gas gap parameters.
18.04.23 15:46
Procedure Editor
4c. Edit the Source Type „Sample“
2. Press the „Update“ button to set the new values in the selected line.
1. Enter the sample parameters
( = Source in the order file).
18.04.23 15:46
Procedure Editor
4d. Edit the Source Type „Solvent in Tray“
2. Press the „Update“ button to set the new values in the selected line.
1. Enter the parameters for the tray solvent.
18.04.23 15:46
Procedure Editor
Select the solvent name from the list.
Hint: For each solvent name in the list the position in the tray is predefined in the configuration.
4d. Edit the Source Type „Solvent in Tray“
18.04.23 15:46
Procedure Editor
1. Check the type of sub-procedure.
5. Adding Sub-Procedures to a Line
2. Select the name of the sub-procedure (all files of sub directory ...\Disp\ are listed ).
18.04.23 15:46
Procedure Editor
A procedure with the type „Dispense“ will be opened.
5a. Editing a Sub-Procedure Type „Disp“
18.04.23 15:46
Procedure Editor
A procedure with the type „Mix“ will be opened.
5b. Editing a Sub-Procedure Type „Mix“
18.04.23 15:46
Procedure Editor
A procedure with the type „Clean“ will be opened(Save as a Custom procedure to edit).
5c. Editing a Sub-Procedure Type „Clean“
18.04.23 15:46
Procedure Editor
1. Select a line from the list.
6. Adding Lines
2. Modify the value area if required.
3. Use the „Add below“ button to insert a copy of the current line.
18.04.23 15:46
Procedure Editor
7. Copying and Pasting Lines
5. Press the „Paste below“ button.
1. Select a source line from the list.
2. Modify the value area if required.
3. Use the „Copy“ button to copy the current value area.
4. Select a location to paste the new data.
18.04.23 15:46
Procedure Editor
Use the „Delete“ button to remove the selected line
from the list.
8. Deleting Lines