For tariff classification basic information requirements, click:

•Ch. 1-25 for Agricultural Products•Ch. 26-40 for Chemical, Plastic & Rubber Products•Ch. 41-64 for Wood, Paper, textile, Clothing•Ch. 65-83 for Metals and Non-Metals Products•Ch. 84-97 for Machinery , Transport Equipment and Miscellaneous manufactured Articles

Home

CHAPTER 1-25

1. Sample2. Catalogue/brochures3 . Technical Specification /4. List of ingredient/s and percent contents5. Production process

CHAPTER 26-40

1.Defined Chemical Composition/Chemical Analysis (specify if % by wt or % by volume) certified by the supplier2.Usage and Physical Form 3.Production Process 4.Actual sample if possible

SPECIFIC FOR CERTAIN CHAPTERS

CHAPTER 271.Proximate Analysis for Coal Products (FC, VCM, Ash, Moisture, Sulfur Content, Calorific Value)2.Percent volume (including losses)

CHAPTER 30•Specify active ingredients, form (for medicaments)

SPECIFIC FOR CERTAIN CHAPTERS

Chapter 32•Should express % solvent content

Chapter 34•State the surface activity of the surfactant•Waxes should have dropping point and viscosity value

SPECIFIC FOR CERTAIN CHAPTERS

Chapter 35•Should express % sugar content for “dextrins”

Chapter 36•Physical forms, packaging and capacity

Chapter 37•Physical forms including dimension and packaging

CHAPTER 41 vs CHAPTER 43

Raw hides and skins vs. Raw Furskins

1. Kind of animal and species2. Process (pre-tanned, tanned, wet state, dry state, etc)3. Preservative (fresh, chilled, pickled etc)

CHAPTER 42

1. Made from what animal species for “Articles of Leather “2. Material composition (leather, plastic, textile etc) for “bags” CHAPTER 441. Species of wood2. Material composition (pure or composite)3. Physical properties4. Density5. Treatment

CHAPTER 45

• Agglomerated or natural CHAPTER 461. Plaiting materials, basketwork and wickerwork2. Process (interlacing, weaving etc.)3. Material composition (plaiting material used

CHAPTER 47

1. Pulp process (Mechanical, chemical or combination of both)2. For Recovered Waste paper(unbleached, bleached, mechanical pulp, waste and scrap)

CHAPTER 481. Size (length x width x thickness)2. Weight (gsm)3. Process (bleached, unbleached, coated, uncoated, coloured,

embossed, decorated)4. Others ( ash content, burst strength, tensile strength)

CHAPTER 49

1. Kind of print2. Repetitive or design printing?

CHAPTER 50 and 52

1. What is it? Silk (worm, raw , waste, yarn, fabric) cotton (raw, yarn, woven fabric, etc.)

2. What kind of animal hair?3. Size (length x width x thickness) and weight (gsm) 4. Process (bleached, unbleached, coated, uncoated, coloured,

embossed, decorated)5. Others ( ash content, burst strength, tensile strength)

CHAPTERS 53 to 60

1. Material composition (jute, wool or fine animal hair, cotton, synthetic fibres, artificial fibres)

2. Width (cm)3. Weight (percentage )4. Others ( unbleached, bleached, printed, dyed, of yarns of

different colours etc0

CHAPTER 61 and 62

1. Material compositionProcess

CHAPTER 64

1. Kind of footwear (waterproof, sports shoes, with metal toe cap etc)

2. Material composition (leather, composition leather, textile, rubber, plastic etc)

CHAPTER 65

1. Materials used2. Intended use

CHAPTER 66

1. Intended use2. Mechanism used (Have a telescopic shaft?)

CHAPTER 65

1. Materials used2. Intended use

CHAPTER 661. Intended use2. Mechanism used (Have a telescopic shaft?) CHAPTER 67• Materials used (synthetic, organic, other)

CHAPTER 68 -69

1. Material used (marble, granite, other stone; cement, asbestos or containing with thereof; and reinforced/ layered with other material)

2. Intended use (roof, floor, wall)3. Compound percentage

CHAPTER 70

1. Intended use (laboratory, household, construction, vehicles, other)

2. Process used to obtain product (casted, rolled, drawn, blown

3. Finishing (laminated, tempered, wired, non-wired, optical, other

4. Size and dimensions 5. Material used (quartz or other fused silica)

CHAPTER 71

1. Material (plastic, precious stone or metals, other)

2. Intended use (monetary, jewellery, other)3. Form (powder, coin, other)

CHAPTERS 72 to 76

1. Material (alloy, non-alloy, stainless steel plated or coated including weight percentage, material grade)

2. Process (wrought, unwrought; cold-rolled, hot-rolled)

3. Form (coils, sheets, bars, wires, and other profiles

4. size, shape and dimensions including capacity

CHAPTERS 78 to 81

1. Material used (refined lead, lead-alloy including weight percentage)

2. Form (powder, flakes, sheets, foils, bars, rods, wires and other profiles)

3. Intended use 4. Size, shape and dimensions 5. Process used to obtain product (wrought,

unwrought)

CHAPTER 82 and 83

1. Intended use2. Size, shape and dimensions3. Material used

CHAPTER 84 and 85

1. Technical Specifications (rating, size, shape, dimensions and how it function )

2. Picture and sample 3. Form (single , composite or functional with

individual components units) 4. Use and function including whether for

domestic or industrial

CHAPTER 84 and 85

5. Material components (plastic, wood, metals, textile)

6. Condition upon importation (CKD, CBU, in set, etc.)

7. System components (if its a system and how it works)

CHAPTER 86 to 89

1. Function (for rail, land, water and air transport including specific and principal function

2. Technical specification (rating, dimension, size, weight, etc.)

3. Picture and sample

CHAPTER 86 to 89

4. Use (transport of persons, goods, etc. and for agricultural use)

5. Kind of engine (diesel, gasoline, etc.)6. Condition upon importation (CKD, CBU,

incomplete unit)

CHAPTER 90

1. Technical Specifications (rating, size, shape, dimensions, etc.)

2. Components and how it works3. Functions and uses

CHAPTER 91 to 93

1. Technical Specifications (dimension, weight, etc.)

2. Function and uses (for vehicles, aircraft, spacecraft, etc.)

3. Kind (wrist, alarm, wall, etc)4. Components and how it works

CHAPTER 94

1. Technical Specifications (2. Material Components (wood, metals,

plastic, etc.)3. Function and uses (for aircraft, vehicle,

etc.; medical, dental, barber’s, veterinary, etc.),

4. Type (baby walker; table, desk, bedside, etc.; electrical or not)

CHAPTER 95

1. Type (wheeled toys, recreational models, stuffed, etc.)2. Specifications (dimension, shape, etc.)3. Function and uses (water sport, snow-ski equipment,

etc.)4. Components and how it works

wor

CHAPTERS 96 and 97

1. Function and uses (artist’s, dental brush; piezo-electric, cigarette, pocket lighters)

2. Specifications (shape, design, dimension , etc.)

3. Material Components ( ivory, metal, plastic, etc.)