produktbeschreibung double mitre saw dg 244...kingston - milton keynes - mk10 obd united kingdom...

DG 244 12-07-2016 10:51 am of 5

elumatec United Kingdom Ltd.Unit 2, Europa Business ParkMaidstone RoadKingston - Milton Keynes - MK10 OBDUnited Kingdom

Phone +44 1908 580 800Fax +44 1908 580 [email protected]

The right to make technical alterations isreserved.

DG 244DOUBLE MITRE SAW

DOUBLE MITRE SAW DG 244

DescriptionThe reliable elumatec principle “Cutting from below”:

Provides unhindered access to support tableA large saw blade diameter and optimal use of the saw blade offer an ideal cuttingcapacity for all cutting variationsStandard for elumatec: External dimension cuts at all angle positions. This means nolength calculations are necessary when cutting profiles of different heightsThe universal pivoting and tilting of both saw units allows cutting of high and wideprofiles as well as every type of compound mitre. Consequently, many profiles can be cutwithout support blocksExternal-dimension cuts possible for all cutting variations. Consequently, no complicatedlength calculations are necessary. This is a big advantage when cutting special anglesSafety hoodsEquipped with saw blades as standardPulsed coolant system

Technical specifications

Minimum cutting length at 90° 375 mmMinimum cutting length tilted at 45° 375 mmPivoting range inwards, pneumatically, 90° – 45°(manually up to 22.5° inwards and up to 140° outwards with digital display)Tilting range inwards, pneumatically, 90° – 45°(intermediate angles manually adjustable with digital read-out display and turret stop)

DG 244 12-07-2016 10:51 am of 5




For cutting range, see cutting diagramSaw blade diameter 550 mmSaw blade speed 2,250 rpmPower supply 230/400 V, 3~, 50 HzPower output per motor 4 kWCompressed air supply 7 barAir consumption per working cycle 40 l without spraying, 64 l with spraying

Cutting length variants

4,500 mm6,000 mm7,500 mm

Options

DG 244 M machine bed made of steel sheetHydro-pneumatic saw feedSaw feed - minimum cutting length 400 mmProfile lifting barsAdditional software for E 580: Optimisation program,Software module for chop and oversize length cutsMobile or automatically retractable workpiece supportsMaterial clamping unitsTransom stop and lead-cut stopLabel printer for variants with E 355 and E 580Exhaust connectors, extraction systemClock systemRoller conveyorSaw bladesHigh performance cutting fluid

Double mitre saw DG244DG 244 + E 580 + specialaccessories

Double mitre saw DG244

DG 244 12-07-2016 10:51 am of 5






Double mitre saw DG244Cutting diagram

DG 244 12-07-2016 10:51 am of 5




E 580PC CONTROLLER

PC CONTROL E 580

Description

Machine configurations with one, three or five axesLength measurement using an absolute measuring system independent of drivePneumatic locking at positionRobust, low-wear direct drive for moving saw unitErgonomic location of the control unitPC with Windows OS for operating the machineFour USB ports12" touchscreenOne serial RS 232 interfaceTwo network ports, RJ45, 10/100 MbitPorts for connecting additional keyboard and mouse

Optional

Label printer

DG 244 12-07-2016 10:51 am of 5




E 355POSITIONING CONTROLLER

POSITIONING CONTROL E 355

Description

Measuring system is independent of drivePositioning accuracy +/- 0.1 mm per metrePneumatic locking at position5.7" matrix display with membrane keyboard and hand wheelfor navigation through the operation menusMemory for 1,000 data records. Correction values for profilesThe block number, length dimension, profile number, angular positionand quantity can be saved in the memoryLanguage selectionSwitching between mm/inchesRS 232 interfaceUSB port on the front

Option

Printer

produktbeschreibung double mitre saw dg 244...kingston - milton keynes - mk10 obd united kingdom...

Documents