professor!shamsuddin!bin!sulaiman.phd!page2/65% 2007% dept.%of%mechanical%and%manufacturing%...
TRANSCRIPT
-
Page 1/65
1. Educational Background 1989 – 1991 University of Wales, Swansea, United Kingdom PhD in Mechanical Engineering Thermal and Flow Analysis of Casting Process: Numerical Simulation and Experimental
Works (Areas of interest: Casting Technology, Metal Forming, Composite Material and Automation)
1987 – 1988 Univeristy of Wales, Swansea, United Kingdom Master of Science (Design and Economic Manufacture) 1982-‐1986 Universiti Putra Malaysia Bachelor of Engineering (Agricultural) 2. Previous Academic and Other Relevant Appointments
Date
Appointment
Sept 2007-‐to date Professor Dept. of Mechanical and Manufacturing Engineering, Faculty of Engineering Universiti Putra Malaysia
1July 2011-‐ Jun 2014 Senate Member Universiti Putra Malaysia
April 2008-‐March 2011 Deputy Dean School of Graduate Studies Universiti Putra Malaysia
Sept 2003-‐Aug 2006 Deputy Dean Faculty of Engineering Universiti Putra Malaysia
Feb. 2001 – Nov 2001 Deputy Director University Research Park/Taman Penyelidikan Universiti (TPU) Universiti Putra Malaysia
August 1998-‐August Associate Professor
PROFESSOR SHAMSUDDIN BIN SULAIMAN. PhD Department of Mechanical and Manufacturing Engineering Faculty of Engineering Universiti Putra Malaysia (UPM) 43400 UPM Serdang, Selangor, MALAYSIA Specialisation: Manufacturing Engineering, Metal Composite Materials
and Casting Technology
email: [email protected]
-
Page 2/65
2007 Dept. of Mechanical and Manufacturing Engineering Universiti Putra Malaysia
April’99-‐Oct’99 College Master/Pengetua Kolej Tun Perak Universiti Putra Malaysia
Jan 1995-‐August 1998 Head Department of Mechanical and Manufacturing Engineering Universiti Putra Malaysia
3. Teaching and Supervision
a. Teaching Courses
Code Course Name Institution KMP 3001/EMM3701/EMM3712
Manufacturing Process I UPM
KMP 3003/EMM3702/EMM4702
Manufacturing Process II UPM
EMM 3008 Powder Metallurgy UPM KMP 3005/EMM3005 Tool Engineering UPM EMM 3807 Machine Tool Technology UPM KMP 3803 Automation II UPM KMP3508 Robot Dynamic UPM KS311 Fluid Mechanics 1 UPM KS 353 Material Engineering UPM KS 373 Fabrication and Production UPM KMP 5001/EMM5701/5702
Advanced manufacturing Processes UPM
EMM 5708 Automation and Robotics UPM EMM5602 Total Quality Management UPM EMM 5616 Maintenance Management UPM KCEP 3302 Tools Engineering (Mould and Die) UM
b. Supervision of Students
Level Graduated / Completed On-‐going
Chairman/ Supervisor
Committee/ Co-‐Supervisor
Chairman/ Supervisor
Committee/ Co-‐Supervisor
PhD 14 18 9 11 MSc 20 16 0 7 MEng 77 -‐ 9 -‐ BEng 74 -‐ 3 -‐
-
Page 3/65
PhD Completed (Supervisor) No. Name Thesis Title
Year
Graduated 1. Rosmamuhamadani bin
Ramli (GS34430) Characterization and mechanical properties of in-‐situ titanium diboride fibre reinforced aluminium copper alloy composites
2016
2. Ishak Mohmad Ali (GS32496)
Mechanical Properties of Propeller by vibration casting
2016
3. Jamshid Nemati GS28431
Mechanical properties of ultra-‐fine grain Aluminium Al6063 and pure copper processed by equal channel angular extrusion method
2015
4. Hani Mizhir GS29903
Improvement of the Mechanical Properties of Aluminium Alloys and Composite Extruded parts
2015
5. Nanang Fatchurohman GS26836
Manufacturing process and material selection using modified multi criteria decision making for brake disc
2014
6. Azhar Abdullah GS19228 Mechanical properties of Tin Mine tailing sand for greensand casting mould
2013
7. Taufik Saroni GS22022 Development of non-‐linear thermal expansion model for casted Aluminium Silicon Carbide
2012
8. M.Sayuti GS20480 Properties of Titanium carbide reinforced aluminium silicon alloy matrix
2012
9. Daryoush Safarzadeh GS18284
Design an development of a self-‐propelled hydraulic floor crane
2012
10. Mohamed A.Abdulmawlla Jolgaf GS16483
Optimization of closed die forging process 2011
11. Elfetori F. Abdewi GS13364
Design of composite tube subjected to quasi-‐static and dynamic impact loadings
2007
12. Thoguluva Raghavan Vijayaram GS13402
Properties of Metal matrix Composite of Aluminium – 11.8% Silicon Reinforced with different particulates
2006
13. Lim Ying Pio GS11777 Effects of grain refinement on the cooling rate, and microstructural and mechanical properties of Al-‐Si sand casting
2006
14. Rosnah Mohd Yusof Implementation of Advanced Manufacturing Technologies (AMTs) in the Small and Medium Scale Industries (SMIs) of Malaysia
2002
-
Page 4/65
PhD Completed (Co-‐Supervisor)
No. Name Thesis Title
Year Graduated
1. Mohamed Serdah M (GS37298)
Variable Valve Timing Optimization by Using Electromagnetic Solenoid in the Engine
2016
2. Mohd Uzair bin Mohd Rosli (GS30204)
Development of value added engineering concept generation for automotive parts
2015
3. Shahla paslar (GS31529) Development of hybrid dynamic scheduling model for flexible manufacturing system
2015
4. Mohd Azaman Md Deros (GS32933)
Development of Thin wall natural Fibre Composite 2015
5. Muhammad Yusuf (GS22333)
Cutting parameter optimization for aluminium LM6 composite using design of experiment method
2013
6. Amer Najat Najmaldeen Kakahy (GS28436)
Design and development of an integrated slasher (Pulverzer) fro sweet potato harvester
2013
7. Mohammad Reza Shahraki (iGS18304)
Industrial Engineering 2012
8. Ali Hashemi (GS21422) Agricultural Machine design
2012
9. Mohammed Shu'aibu Abubakar (GS21830)
Machine Design 2012
10. Mehrdad Nikbakht Eliaderany (GS21374)
Supply chain Management in Oil Industry 2012
11. Fatai Bukola Akande (GS21068)
Motion resistance analyses of towed narrow wheels 2011
12. Md.Akhir Hamid (GS15631)
Development of Sweet potato harvester
2011
13. Mohammadreza Vasili (GS18909)
Development of load shuffling and travel time model for miniload sutomated storage and retrieval system with open-‐rack structure temperature for turning operations.
2011
14. Gholamreza Ismailian (GS17989)
Line Balancing of Production line. 2010
15. Suditama (GS05827) Analysis of Thermal Storage Material and Heat Transfer Characteristics
2008
16. Fayiz Yousef Mahmoud Abu Khadra (GS12543)
Metamodelling Technique of metal forming process 2006
17. Ooi Chee Keong (GS02448)
Improving Flexibility in Manufacturing using a Family Ordering System for long lead time components
2005
-
Page 5/65
18. Elnougomi Abd. Elgadir Omer
Design, Fabrication and Performance Test of a Peanut Harvesting Machine
2000
19. Tang Sai Hong Rapid Prototyping using a Precision Robotic Manipulator
2000
20. Faizal Amri The performance of a disk plow combined with a rotary blade in wet soil
1997
PhD Progress (Supervisor) No. Name Thesis Title
Expected Year
to be Graduated
1. 1.
Subramaniasarma a/l Sreenivasan (GS31060)
BMC Kenaf Reinforced Polymer 2016
2. 2.
Zolkarnain bin Marjom (GS41838)
Composite Casting Technology 2018
3. 3.
Almukhtar. Ib. A. Aljermi. (GS42636)
Casting: Improvement of Al Cu Composite 2018
4. 4.
Zatil Aqmar binti Zulkifli (GS40943)
Wettability in Casting Process 2018
5. 5.
Ahmaad Kadmouse Aldeehani (GS43396)
Integrated maintenance management in Sport Facility
2019
6. 6.
Abdullah M S M Aladwani (GS43398)
Integrated maintenance management in Halal Food 2019
7. 7.
Hamid Nahidi (GS43646)
Metal Matrix Composite 2018
8. PhD Progress (Co-‐Supervisor) No. Name of Students and
Title of Thesis/Project Thesis Title
Year Expected
to be Graduated
1. Qasim Mhalhal Azpen
(GS39560)
Production system in Manufacturing Industry 2018
2. Teo Hiu Hong (GS31074) Industrial Engineering
2017
3. Jethesh Prabhakaran (GS31899)
Manufacturing System Engineering 2018
4. Mehran Tamjidy (GS35754)
Industrial Managemnt system 2018
-
Page 6/65
5. Mageswaran a/l Arunasalam (GS36238)
Manufacturing Engineering 2018
6. Khairul Nizam Md Tohit (GS35798)
Industrial Management System 2018
7. Bala Gambo Jahun (GS37351)
Design and Fabrication of combined harvester 2017
8. Bt Iskandar Zulkarnain bin Baharudin (GS37694)
Manufacturing system Engineering 2018
9. Mohd Shahrizan bin Yusoff (GS38448)
Lean Engineering in Automotive Industry 2017
Master of Science Completed (Supervisor)
No. Name Thesis Title
Year Graduated
1. Mona Kiaee (GS22043) Development of Squeeze casting
2015
2. Hafizal Abu Bakar (GS12123)
Design and Fabrication of three component balance of wind tunnel
2012
3. Suraya Sulaiman (GS22223)
Metal flow and solidification of casting process 2011
4. Nanang Fatchurohman (GS19360)
Molten metal flow and solidification of casting process 2010
5. Mostafa Badakshan (GS18160)
Optimization of simultaneous scheduling for machines and automated guided vehicles using fuzzy genetic algorithm
2009
6. Ehsaanreza Bagherian (GS 19723),
Development of a ceramic foam filter for filtering molten aluminium alloy in casting processes
2009
7. Poria Matoorian (GS16823)
Development of Super Alloy machining 2008
8. Khairul Nizam Md. Tohit (GS13383)
Improvement of accuracy level of automotive front fender shield assembly using process failure mode and effect analysis and control plan techniques.
2006
9. M. Sayuti (GS12364) Mechanical properties and characterization studies on the ascast quartz particulate reinforced LM6 alloy matrix composites
2006
10. Wong Choon Tat Design and fabrication of plastic injection mould
2004
11. Kader Ibrahim Ab. Wafers fabrication of bipolar transistor 2003
-
Page 7/65
Wahab
12. Mohamad Irwan Yahaya
Reverse Engineering of free-‐form surfaces 2003
13. Edi Sham Zainudin
Numerical Invesigation of Fibre Reinforced Polymer 2002
14. Azman Senin Optimisation of machining parameters in Wire Cutting Process for Cooling Jig
2002
15. Mohd. Razali Samin Robot Manipulation Tracjectory Planning in Complex Position
2002
16. Mohd Khairol Anuar bin Mohd Ariffin
Design, Fabrication and Analysis of Plasting Injection Moulding Mould
2001
17. Alex Lim Kheng Hooi Thermal Analysis of Two and Three-‐gate Sand Casting Mould
2001
18. Elfetori F. Abdewi Using FEM in Optimisation of Die Casting Design
1999
19. Md Samsul Abedin Computer Aided Engineering in diecasting design
1997
20. Ng Yu Ting Development of Auto Wire Bonder Expert System
1997
Master of Science Completed (Co-‐Supervisor)
No. Name Thesis Title
Year Graduated
1. Hamdan Yahya Ahmed Al-‐Ruhaimi (GS27013)
Automated approach for oil palm in vitro shoot sorting
2014
2. Seyed Ehfarzaneh Nojabaei (GS26533)
Development of priority oriented scheduling method to increase the efficiency and reliability of manufacturing system
2009
3. Mohd Fauzi Hashim Rigid Plastics FEA in metal forming processes
2007
4. Mohandas a/l Krisnan Design and development of labour productivity monitoring system in manufacturing
2007
5. Sharifah Imihezri Syed Shaharudin (GS12124)
Clutch pedal design and fabrication for Injection moulding for polyamide-‐based short fibre reinforced composite
2005
6. Lee Hoo Boon Rapid Prototyping system of composite material products
2003
7. Pitoon Nopnakorn Development of 2D CAD software based on ISO technical drawing standard
2003
8. A.K.M.Parves Iqbal Development of an intelligent painter robot using Cartesian coordinate approach for construction industry
2002
9. Tan Chee Fai Development of hole recognition system using rule-‐ 2001
-
Page 8/65
based technique
10. Mohd Ahadlin Mohd Daud
The Evaluation of Mechinablity and Surface Texture of Tool Steel with Copper Electrode in Electro Discharge Machine
2001
11. Ten Seng Teik Emulation of the Space Robotics System on Earth
2001
12. Mohamed A.Abdulmawlla
CAD/CAM system for closed die forging Process 2000
13. Elsadiq Mahdi Ahmed Saad
Design and Fabricate filament winding machine and analysis of cotton/epoxy and pandanus/epoxy
1997
14. Mohabatul Zaman Bukhari
Development of no-‐clean solder for Radio Frequency power module
1996
15. Shafina Sultana Simulation-‐based analysis of kinematics, dynamics and control of space robots
1995
16. Wan Tarmeze Wan Ariffin
Strength and Stiffness of joints in rattan furniture 1994
Master of Engineering Completed (Supervisor – Without thesis)
No. Name Thesis Title
Year Graduated
1. Fairul Ariffin
Effect of water quality during mould cooling to the mould serface of metal slab in thin casting process
2016
2. Fuan Han Seng Air quality control on kitchen exhaust
2016
3. Mohd Zuhaifi Zainol Effect of warm peening on fatique performance of SAE 9254 steel
2016
4. Turki Salem Mohsen Al-‐Kaf
Image processing for blood vessel segmentation in retina
2016
5. Hassan jabbar Hayawi Numerical simulation of heat transfer ro nanofluids flow in ribbed channel
2016
6. Wan Norizawati Wan Isahak
Automated visual inspection system for detection in diodes manufacturing
2016
7. Mohd Nawawi Ahmad Simulation of hybrid cooling method using thermoelectric cooler in electric cooling
2016
8. Mohd Kamarul Nizam bin Mahmood
Effect of Post Weld Heat Treatment Microstrcuture and Mechanical Properties of Carbon Steel Plate
2015
9. Amjad Ashor Mohamad The Effect of Air Bleed on Jet Engine Performance
2015
10. Khairil Amri bin Kamaruzzaman
Impact of Corrosion Coatings on Exposed Structures
2015
-
Page 9/65
11. Ahmed Ali M. Khan Total Quality Management in Industry
2015
12. Kong Yoke Yoon
A Study of Quality Control as a Competitive Tool for Small Scale Enterprises in Selangor
2015
13. Mohd Shafei San Design and fabrication of food automated system
2014
14. Ismi Aishah Ishak Service Quality/Management Engineering
2014
15. Ili Marini Zainal Abidin Implementing Lean Six Sigma For Process Improvement
2014
16. Masni Ahmad Basri Service Management in MAS
2014
17. Halimaton Nabilah Mohd Husin
Total Quality Management in Food Industry 2014
18. Rami Abdulhakeem
Maintenance Management in SME 2014
19. Mohamad Juraidi Jamal Natural composite material
2014
20. Mohamad Shahidan Machine maintenance
2014
21. Noor Diyana Dahlan Plastic Injection Mould
2014
22. Rosidah Mohd Norsat Computational Analysis in Manufacturing Process
2014
23. Marwan Mat Salleh Analysis of Used Polytops From Schools in Malaysia
2014
24. Joshua Raj Solar Powered Car Ventilation System
2014
25. Mohd Norhan GS33725
E-‐Procurement Integration:Impediment Face by Malaysia's Automakers Vendors
2013
26. Safwan Azizi GS34652
Design of Plastic Injection Mould for thick wall product
2013
27. Mohd Firdaus Dzulkafli GS32797
Maintenance Strategy Application in Industry
2013
28. Zatil Hafila Kamaruddin GS33602
Metal Casting Process 2013
29. Emeyusrezal Daud GS34894
The Development of Green Tech in Aotumotive Industry in Malaysia-‐Development Green Vehicle in Proton
2013
30. Zatil Hazrati Kamaruddin GS33609
Fabrication of Skid Tank
2013
31. Zulkefli Ismail GS34381
Hot Rolled Coil at The Steel Making Plant -‐The Quality Problems
2013
32. Nazarul Abidin Failure Analysis in Manufacturing Machinery / CAD 2013
-
Page 10/65
GS32796
CAM
33. Nasuha Menhat GS32649
Smartphone features among UPM students 2013
34. Nur Atiqah Nik Shamsudin GS32658
Smartphone usage and the implecations among UPM’s students
2013
35. Noor Syarida Abdul Rahman GS32912
Students satisfaction towards service quality of front counter staff in private university
2013
36. Lim Ying Shing GS33076
Brand switching behavior over laptop brands among UPM students
2013
37. Saeid Pourseifaddini GS31290
An approach to long-‐term recovery procedure as part of local disaster recovery management: A study on earthquakes Zarand, Iran 2005.
2013
38. Alireza Rashidi GS33180
Application of value stream mapping in the furniture company
2013
39. Ong Yu Lee GS33061
Development of a program to calculate plastic material property for non linear FE Analysis
2013
40. Esadig Abdalla Mohammed Bushara GS31345
Fast moving consumer goods productivity improvement
2012
41. Seyed Sattar Emamian GS30919
Failure Analysis of Welding process
2012
42. Nurul Zanariah Kolan GS31467
Maintenance IT equipment in training institute in Malaysia
2012
43. Mirmani Mehrbakhsh GS29222
casting in jewellery (loss wax investment casting)
2012
44. Amir Sayah Roshan Zamir GS31916
FEA in pressure vessel 2012
45. Farbod Redaei GS29281
Construction project management
2012
46. Sorosh Borozjani GS31299
FEA and improving wind turbine
2012
47. Hamed Niakan GS31711
Supply chain management
2012
48. Murugiah Sivasubramaniam
Back surface scribe ID for 200mm wafer fabrication 2011
49. Megat Mohd Amzari Megat Mohd Aris
Analysis of 2-‐stroke small engine emission system 2011
-
Page 11/65
50. Firdaus Mohamed Sahid Chips formation and tool wear characteristics of
turning operation
2011
51. Syarina Sharuddin
Analysis of plastic Injection moulding process 2011
52. Ishak Mohamad Ali
Integrated Fluid Parametric Analyser 2010
53. Zaidil Abdilla Ahmad Salehuddin
Project management of boat building and repair 2010
54. Noorhazilah Baharin Risk management – irrigation project using pressurized piping system
2010
55. Subramaniasarma a/l Sreenivasan
Simulation of thermoset manufacturing process 2010
56. Muhamad Hasnulhadi Mohamad Jaafar
Optimization of cutting parameter of tungsten carbide tool life turning process
2010
57. Safari Hj Mat Desa Project management in hatchery rainfall building system
2010
58. Zailani Zainal Abidin
Solid lubricant in machining process 2010
59. Nazrol Hj Mait
Comparison of dies to produce similar products 2010
60. Shamsuddin Man
Process parameter for rectangular deep drawing
61. Mohd Zairulnizam Mohd Zawawi
Analysis of an injection moulding parts using MoldFlow (feed system)
2010
62. Roslan Mohamad Sharip Design of single cavity hot runner mould for juice cup
2010
63. Farah Zaheeda Kamaruddin
Diecasting Finishing surface 2010
64. Mahsa Hosseini Risk based maintenance in Unit 4 Steam Generator of Bandar Abbas Power Plant
2010
65. Syahrunizam Buyamin
Inventory Management System 2010
66. Sohaimi Pawanchi Improvement of CAD/CAM CNC process of gasing production
67. Kaveh Faghihi Customer Knowledge Management
2010
68. Abdalsalam I. Fadeel Development hybrid software between visual basic and CAD/CAM for gasing
2010
69. Ahmed Osman Ahmed Babkir
Failure and successful strategic management in business Control and automation of manufacturing system
2010
70. Umar Ali Umar RFID: Control and automation of manufacturing system
2009
-
Page 12/65
Bachelor of Eng (Mechanical) Completed (Supervisor)
No. Name Thesis Title
Year Graduated
1. Osama Alsaied Abdalla Eltaher
Plastic Injection Moulding parameters for high thickness and volume product
2016
2. Akram Saeed Aljaberi
Mechanical Propertiesof Al alloys vibration casting 2016
3. Syed Zaki Ahmed Improvement of metal properties by vibration casting technology
2015
4. Mohammad Afeef RP of polymer based Tops (Gasing)
2015
5. Mustika Ayu Muayanti Design and fabrication of rope machine
2014
6. Mohammad Zafirul Haris
Rice hush reinforced polypropylene composites 2014
71. Mah Way Sheng Quality Management system
2009
72. Ahmad Rosli Abdul Manap
Design of PIM for gasing 2009
73. Zakaria A.Razak Study of 3D mouldflow analysis for plastic spinning top (gasing)
2009
74. Mohamad Oukal Alghali Fundamental characteristics of metal flow in casting mould of aluminium alloys
2008
75. Ahmed Alabedelah Design and development of Keyboardless Book-‐Style Notebook
2008
76. Mohd. Afandi Six Sigma project of Moulding Defect Reduction
2008
77. Mohammed Omran Wafi
Wettability of MMC 2007
78. Tarek Marwan Development of SiC reinforced MMC
2007
79. Zan Zainudin Die design and fabrication
2007
80. Amizi Noor Job-‐shop sequencing for small press shop
2007
81. Adel Abulgasm Lahimer Automated system of a Composite product fabrication
2007
82. Yuslan Yasok Design and development of press tool die for sheet metal product
2006
83. Azmi Harun Design and Analysis of mould for Plastic Injection Moulding
2006
84. Nur Elya Total Quality management in Perodua
2005
-
Page 13/65
7. Shanmugaprian Rajasagaran
Design and Fabrication of sundial 2013
8. Mohamad Asyraf Yusof Fabrication of plastic injection mould
2013
9. Shawali Mechanical properties of Aluminium extruded parts
2012
10. Firdaus Sand mould vibrator
2012
11. Faiz Design and improvement of fuel furnace
2012
12. Kamrul Design and fabrication of fuel furnace 1
2011
13. Azedi Design and fabrication of fuel furnace 2
2011
14. Mohammad Fathullah Proton parts analysis
2010
15. Khairil Hazri Analysis and improvement of proton brake system 1
2010
16. Firdaus Lokman Al Hakim
Analysis and improvement of proton brake system 2
2010
17. Mohd Affindy Application of CAD/CAM in Spinning top (gasing) production
2009
18. Mohd Sharil Production of thermoplastic spinning tops (gasing)
2009
19. Erdy Herwan Design and fabrication of ropes (for spinning tops) machine
2009
20. Mohd Nasrol Design and fabrication of spinning tops (gasing) machine
2009
21. Radha Krishnan a/l Ponnan
Manufacturing of composite corrugated tubes 2008
22. Logeswaran a/l Kuppusamy
Core and pattern making of castings 2008
23. Fatin Suhana Mohd Ali
Metal flow and solidification of casting process 2008
24. Muhammad Firdaus Hamad
Characteristics of Green sand casting 2007
25. Mohd Azril Affindi Development of Squeeze casting products
2007
26. Karthik Poobalan Squeeze Casting process
2006
27. Weldaud Tulus Fabrication of composite products
2006
28. Lee Chee How Thermal Analysis of Casting process
2006
29. Ardy Affendy Squeeze casting for MMC
2006
30. Loo Boon Kian Experimental studies on bullet-‐proof vest (Kevlar) with different stitching patterns
2005
-
Page 14/65
31. Mohd Nazarudin Amir Kajian pembentukan vortex dalam pengacuan cecair
komposit matrik logam (Study of vortex development in stirring of metal matrix composite)
2005
32. Ilani Yaacob Experimental investigation of 3-‐Component Balance
2004
33. Harliza Mohd Yusof Fan system of Wind Tunnel
2004
34. Ahmad Mortaza Pattern making using CAD/CAM system
2004
35. Afdiman Anuar Mechanical engineering services in construction industry
2003
36. Mohd Nadzru Abd. Rahman
Development of casting software
2003
37. Mohd Aatif Ali Mokhtar Development of emergency tube for motorcycles 1
2003
38. Mohd Rizal Adnan Development of emergency tube for motorcycles 2
2003
39. Md. Shahril Mohamad Ambia
Kajian Keupayaan relau induksi di Makmal Foundri, (Study of Induction Furnace Performance II)
2002
40. Yusman Suratman Kajian Keupayaan relau induksi di Makmal Foundri (Study of Induction Furnace Performance 1)
2002
41. Hazarudyn Syah Halim Development of three components balance for wind tunnel 1
2002
42. Mohd Aznor Lamat Development of three components balance for wind tunnel 2
2002
43. Khairul Arif Ahmad Mahir
Development of sand casting process 2002
44. Mohamad Zamri Jahaya Emergency Tube System for Motocycles
2001
45. Leong Yew Boon Software Development of Flow Analysis of Casting
2001
46. Hafizal Abu Bakar Design and Fabrication of Wind Tunnel Instrumentation
2001
47. Liom Hong Seng Software Development of Thermal Analysis of Casting
2001
48. Muhammad Faizal Johan Analisa Aliran Proses Acuan Suntikan Plastik (Analysis of process flow in Plastic Injection Moulding)
2000
49. Tan Chen Loon Eksperimentasi Analisa Haba Dalam Proses Penuangan Pasir (Experimental analysis of heat transfer in sand casting process)
2000
50. Lai Tze Siung Thermal Analysis of Sand Casting
2000
51. Goh Chin Hoi Design and Fabrication of Plastic Injection Mould I
2000
-
Page 15/65
52. Chong Joo Kwong Design and Fabrication of Plastic Injection Mould II
2000
53. Liew Chee Kin Runner system in Plastic Injection Moulding
1999
54. Lim Wei Siang CAD/CAM application in Plastic Injection Moulding 1
1999
55. Mohd Khudzairi Hj Razali CAD/CAM application in Plastic Injection Moulding 2
1999
56. Shahid Sham Md Nor Product development in Plastic injection moulding 1
1999
57. Azaham Mohd Razali Product development in Plastic injection moulding 2
1999
58. Hassan Fahmi Miskam Molten metal flow in casting process
1999
59. Amirudin Abdul Aziz Thermal analysis of sand casting
1999
60. Md. Fauzi Ismail A study on successful certification of ISO 9000 for Manufacturing Companies
1998
61. Mohd Badli Hj Ibrahim Experimental preparation of thermal study in sand casting process
1998
62. Irwan Mohd Amir Design and fabrication of mould for plastic injection moulding 1
1998
63. Yusri Yusoff Design and fabrication of mould for plastic injection moulding 2
1998
64. Aminuddin Abd. Aziz CAD/CAM application in mould making
1998
65. Alias Ahmad An application of robot and conveyor belt for automated handling system
1998
66. Safry Matnor Design, Fabrication and Testing of a weather strip machine
1997
67. Majid Yahya Development of CAD/CAM of casting process
1997
68. Mohd Arifin Samingun Mould testing and investigation of flow characteristics of injection moulding machine
1997
69. Chin Yong Keong Design and Development of an automated orientation detection system with robot arm and Programmable Logic Control integration
1996
70. Wan Shaifuddin Wan Hashim
Analisa terma pemejalan dalam proses penuangan (Thermal analysis of solidification in casting process)
1996
71. Daniel Sahari Rekabentuk dan pembinaan acuan mesin pengacuan suntikan plastik (Design and fabrication of a mould for plastic injection moulding machine)
1996
72. Abdul Razak Jaafar Analisa aliran logam dan perbandingan dengan eksperimen (Metal flow analysis and comparison with experimental results)
1996
-
Page 16/65
73. Ahmad Rashidi Sabudin Kajian aliran plastik dalam mesin pengacuan suntikan (Study of plastic flow in plastic injection moulding machine)
1995
74. Tang Sai Hong Gating system design in sand casting
1995
75. Tham Chee Keen Computer aided fluid flow analysis of the filling of casting system
1994
76. Saravanan s/o Manickam Analysis of molten metal flow in the feeding system of pressure diecasting
1993
4. Research, Consultancy and Publication
a. Grant
Total Accumulated Funding: RM4,826,247 No Duration Title Funding Amount(RM) Designation
1. Aug 2016-‐Sept 2018
International Research with University for Kuwait Project
Kuwait RM360,000 PI
2. Nov 2015-‐Oct 2017
In-‐situ Titanium Diboride (TiB2) reinforced by Aluminium Alloy hybrid Metal matrix composites
FRGS RM104,000 PI
3. Jan 2016-‐ jan 2018
The customers expression towards the design profile and attributes of products
Research Acculturation Collaborative Effort (RACE)
RM70,000 PI
4. 2014-‐2015 Mathematical Modelling of Flow and Heat Transfer for Casted Aluminium Silicon Carbide
Research Acculturation Collaborative Effort (RACE)
RM70,000 PI
5. June 2013-‐Oct 2015
Characterization and development of natural fibre reinforced unsaturated polyester based injection moulding composite material for electrical insulation application
FRGS RM90,500 PI
6. Feb 2011-‐Dec 2013
Investigation on the tailing sand (pasir bekas lombong) from ex-‐tin mines in Peninsular Malaysia dor use in making green sand casting mould
FRGS RM52,000 PI
7. March 2011-‐Dec 2013
Mecahnical properties of MMC LM6 reinforced titanium carbide using Mechanical vibration mould sand casting.
UPM RUGS RM134,500 PI
-
Page 17/65
8. Oct 2010-‐June 2013
Aluminium alloy properties improvement in extrusion process
UPM RUGS RM150,000 PI
9. Nov 2007-‐ Oct 2009
Analysis of molten metal, solidification and the effect of vibration of metal matrix composite (MMC) materials in casting process
FRGS RM114,500 PI
10. Oct 2007-‐ Sept 2009
Manufacturing of metal matrix composite by squeeze casting technology for automotive applications
Sciencefund RM154,400 PI
11. July 2007-‐ Jun 2009
Metal flow and Solidification of Casting Process
UPM RUGS RM70,000 PI
12. April 2007-‐March 2010
Microstructure and mechanical properties of squeeze cast A356 Al-‐Si alloy inoculated with TiC
ScienceFund RM92,498 PI
13. March 2004-‐ Oct 2005
Study of Lift and Drag Forces of Aerodynamic Shapes in the Low Speed Wind Tunnel
UPM RUGS RM50,000 PI
14. Jan 2002-‐Dec 2006
Development and Analysis of Casting Product using Network Method of Flow and Solidification Process
IRPA Experimental Applied Research
RM168,000 PI
15. Jun 2002-‐Jun 2003
Design and Fabrication of Three-‐Component Balance of Wind Tunnel.
UPM Short Term Research Project
RM15,000 PI
16. Jun 1999-‐ Jun 2000
Design and Fabrication Wind Tunnel Instrumentation
UPM Short Term Research Project
RM10,000 PI
17. Jun 1999-‐ Jun 2000
Design and Fabrication of Plastic Injection Mould
UPM Short Term Research Project
RM15,000 Pi
18. August 1995-‐ Jan 1997
Development of Research Model to monitor skill demand for Metal Machining Industry
Ministry of Human Resources of Malaysia
RM159,471 PI
19. 1996-‐2000 Finite Element Modelling of Casting Process
IRPA -‐MOSTI RM268,000 PI
20. Oct 1995-‐March 1996
Pre-‐stressed Fabrication Process for Filament Winding Tubes
University of Akron and Asian Development Bank
US15,000 PI
21. 1991-‐1995 Finite Element Analysis for Stress, Thermofluid and Vibrations
IRPA-‐MOSTI RM550,000 PI
-
Page 18/65
22. 2014-‐2016 Parameters Optimization For Machining CFRP-‐Aluminum Composite Laminates
Science Fund (MOSTI)
151,000 Co
23. 2012-‐2014 Development of an integrated Value Added Engineering methodology for Automotive Parts
FRGS 68,000 Co
24. July 2007-‐Jun 2009
Development of Combinatorial Optimisation for Cutting tool path strategy
UPM RUGS RM70,000 Co
25. 2010-‐2012 Development of a Novel Evolutionary Algorithms for AGV Dynamic Routing In FMS Environment
RUGS 55,000 Co
26. 2009-‐2011 Value Engineering link-‐up with university program Proton saga
PROTON 30,298 Co
27. 2007-‐2009 Development of Combinatorial Optimisation for Cutting tool path strategy
RUGS 70,000 Co
28. 2007-‐2009 Cutting Tool Path Optimisation Using Evolutionary Algorithm
FRGS 100,000 Co
29. 2007-‐2008 Simulation of Cutting Tool Path Strategy for Thin Walled Section Part
NLSG (UPM) 10,000 Co
30. 2007-‐2009 Analysis of flow and solidification of casting process
RUGS 83,000 Co
31. 2002-‐2006 Damage Management of Sheet metal Forming Using Virtual Manufacturing
IRPA -‐ MOSTI RM168,000 Co
32. 2002-‐2006 Development of Artificial Intelligent (AI) Based Expert System for Optimum Turning Process
IRPA -‐ MOSTI RM164,000 Co
33. 2002-‐2006 Concurrent Engineering Manufacturing System of Polymeric – Based Composite Automotive Pedal Box
IRPA -‐ MOSTI RM99,080 Co
34. 1991-‐1995 Computer Integrated Manufacturing (CIM)
IRPA -‐ MOSTI RM1,000,000 Co
b. Fellowship / Travel Grant No Duration Title Funding Type Designation
-
Page 19/65
1. Jan 1994-‐April 1994
Research attachement with Beijing Univesity
UNESCO (USD 20,000)
Travel and other expenditure
Researcher
2. March 1995-‐May 1995
Research Attachment with Swansea University and Casting Industry
Asian Development Bank (USD15,000)
Travel and other expenditure
Researcher
3. Oct 1995-‐March 1996
Research Attachemnt with Akron University, Ohio USA
Asian Development Bank (USD25,000)
Travel, research and other expenditure
Researcher
c. Consultancy No Durati
on Title Funding Designation
1. 2015-‐2017
Reference Module of Material Science and Enginineeirng
Elsevier Editor/Reviewer
2. 2012-‐2014
Kuantan (Master of Manufacturing System Engineering)
Kuantan Program
Expert (Teaching Courses – Advanced Manufacturing Process and Technology and Automation and Robotic)
3. 2012-‐2014
Kuwait (Master of Engineering Program)
Kuwait Program Expert (Teaching Course – Automation and Robotic and Total Quality Management)
4. 2002-‐2014
Evaluation of final exam paper of INTI
INTI University Expert (Engineerring Courses)
5. 2010 Engineering Design Course
UPM Education & Training Sdn. Bhd.
Expert (Teaching Courses)
6. 1999-‐2004
Mould and Die Technology German Malaysia Institute
External Verification of the student Project
7. 2002 Study of the pump characteristics and performance
PEDECO Management Sdn Bhd
Head (Research Contract)
8. 1994-‐1998
Development of Engineering Curriculum for MSc in Manufacturing Systems Engineering
MOTOROLA Seremban
Expert (Curriculum and Engineering Courses)
9. 1995-‐1997
Development of Research Model to monitor skill demand for Metal Machining Industry
Ministry of Human Resources, Malaysia
Head (Research Contract)
d. Patent/ Copyright/ Trademark
No Detail Registration No Year
-
Page 20/65
1. A self-‐propelled hydraulic floor crane
PI2012001330 2012
2. Plastic Made Gasing Top (Commersialiased by MJ Square Sdn Bhd)
PI2012000680 (Malaysia) 2012
3. Plastic Made Gasing Top
PCT/MY2013/000028 2013
4. Plastic Made Gasing Top (Indonesia)
P00201404828 2014
5. Plastic Made Gasing Top (Thailand)
1401004719 2014
6. Plastic Made Gasing Top (Vietnam)
1-‐2014-‐02723 2014
7. Plastic Made Gasing Top (Singapore)
11201404479X 2014
8. Plastic Made Gasing Top (Brunei)
BN/N/2014/0073 2016
9. Apparatus for producing Corrugated Composite Structure and method for making the same
PI 20063841 2006
e. Publications
Book/Chapter in Book (Author/Editor)/Technical Report/Guidelines / Policy
1. M.S.J. Hashmi and S.Sulaiman, Material Application, Performance and Life Cycle. Reference Module on Materials Science and Materials Engineering: Elsevier Ltd, Dec 2015.
2. M. Sayuti, S.Sulaiman, B.T.H.T Baharudin and M.K.A. Ariffin, Metal Matrix Composite Products by Vibration Casting Method, Reference Module on Materials Science and Materials Engineering, doi:10.1016/B978-‐0-‐12-‐803581-‐8.04082-‐0.
3. T.R. Sahroni and S.Sulaiman, Application of Nonlinear Thermal Expansion Model for Casted Alumnium Silicone Carbide, Reference Module on Materials Science and Materials Engineering, doi:10.1016/B978-‐0-‐12-‐803581-‐8.04130-‐8.
4. S. Sulaiman and S.Emamian, Optimum Speed of Friction Stir Welding on 304L Stainless Steel by Finite Element Method. In Comprehensive Materials Processing; Bayraktar, E., Ed.; Elsevier Ltd., 2014; Vol. 6, pp 227–236.
5. M. Sayuti, S. Sulaiman, T.R. Vijayaram, B.T.H.T Baharudin and M.K.A. Arifin, Manufacturing and Properties of Quartz (SiO2) Particulate Reinforced Al-‐11.8%Si Matrix Composites, Composites and their properties, Chapter 18, InTech Pub. (2012)
6. Daryoush Safarzadeh and Shamsuddin Sulaiman, “Self-‐Propelled Hydraulic Floor Crane – Design, Development and Manufacturing”, LAMBERT Academic Publishing, Saarbrucken Germany 2012. ISBN: 978-‐3-‐659-‐18991-‐3
7. M. Sayuti, S. Sulaiman, T.R. Vijayaram, B.T.H.T Baharudin and M.K.A. Arifin, (2012), Manufacturing and Properties of Quartz (SiO2) Particulate Reinforced Al-‐11.8%Si Matrix Composites, Composites and Their Properties, Intech, 978-‐953-‐51-‐0711-‐8
8. A.M.S.Hamouda, S.Sulaiman, M.Ahmadun, “Advances in Material and Processing Technologies”, Volume 1, SIRIM Press, 1998
-
Page 21/65
9. A.M.S.Hamouda, S.Sulaiman, M.Ahmadun, “Advances in Material and Processing Technologies”, Volume 2, SIRIM Press, 1998
10. Shahnor Basri, Shamsuddin Sulaiman, A. Rahim Md. Amin, “Sistem Pengeluaran -‐ Satu Pengenalan (Production System -‐ An Introduction)”, Book published by Dept. of Mechanical and Systems Engineering UPM 1987
Citation Index/Refereed Journals
Journals
1. J. Nemati, G.H.Majzoobi, J.Pipelzadeh and S. Sulaiman, “Characterization of mechanical properties of Al-‐6063 deformed by ECAE”, Int. Journal of Advanced manufacturing Technology, 2016, 84(1-‐4), pp 663-‐672. (IF=1.568).
2. H.M.Magid, S. Sulaiman, M.K.A.Ariffin and B.T.H.T. Baharudin, “Enhancement and improvement of the mechanical properties of aluminium extruded products by mathematical analysis and simulation process”, AIP (2015), 1660, 070113. (IF=1.444).
3. J. Nemati, G.H.Majzoobi, S. Sulaiman, B.T.H.T.Baharudin, and M.A.Azmah Hanim, “Effect of equal channel angular extrusion in Al-‐6063 bending fatique characteristics”,Int. Journal of Minerals, Metallurgy and Materials, April 2015, Vol 22, Issue 4, pp 395-‐404. (IF=0.882)
4. B.G. Jahun, D.Ahmad, M.R.Mahdi and S.Sulaiman, “Design optimization parameters for tractor mounted mulcher blades”, Int. Journal of Applied Engineering Research, 10(23), (2015) pp 43461-‐43464. (Indexed by Scopus)
5. S.Sreenivasan, S.Sulaiman, B.T.H.T.Baharudin, M.K.A. Ariffin and K.Abdan, “ Mechanical Properties of novel kenaf short fiber reinforced bulk molding compound (BMC)”, Journal of Advances in Materials and Processing Technologies, Taylor & Francis, Vol 1, Issue 1-‐2, 2015, pp49-‐55. (Indexed by ISI)
6. M.S. Al-‐Khaldi, M.K.A. Ariffin, S.Sulaiman, B.T.H. Baharudin and N.A. Aziz, “ Improvement in CAM shaft design: An Experimental application and recommendation”, Applied Mechanics and Materials , Vol. 780-‐790 (2015) pp 249-‐254. (Indexed by Scopus)
7. M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Numerical Simulation Analysis of Unfilled and Filled Reinforced Polypropylene on Thin-‐Walled Parts Formed Using the Injection-‐Moulding Process”, Int. Journal of Polymer Science, 2015, 659321. (IF= 3.245)
8. M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Optimization and numerical simulation analysis for molded thin-‐walled parts fabricated using wood-‐filled polypropylene composite via plastic injection molding”, Polymer Engineering and Science,(2015), 11(1), pp. 2531-‐2540. (IF=1.719)
9. N.Fachurrohman, S.Sulaiman, S.M.Sapuan, M.K.A.Ariffin and B.T.H.T.Baharudin, “Analysis of a metal matrix composite automotive component”, Int. Journal of Automotive and Mechanical Engineering, (2015), 11 (1), pp. 2531-‐2540. (Indexed by Scopus)
10. Rosmamuhamadani Ramli, Shamsuddin Sulaiman, Mohd Idris Shah Ismail, Azmah Hanim Mohamed Arif, and Mahesh Kumar Talari, “Wear Properties of Metal Matrix Composite Al-‐Cu and Al-‐Cu-‐TiB2”, Material Science Forum Vol 819 (2015) pp268-‐273. (Indexed by Scopus)
-
Page 22/65
11. Hani Mizhir Magid, S.Sulaiman, M.K.A.Ariffin and B.T.H.T. Baharudin, “Modelling and Simulation of hollow Profile Aluminium Extruded Product”, Applied Mechanics and Materials Vol. 761 (2015) pp 17-‐21. (Indexed by Scopus)
12. Ahmad Aizuddin Abd Aziz, Shamsuddin Sulaiman, Aung Lwin Moe and and Aminudin Abu, “Investigation of Plastic Injection Moulding Process Optimization in Complex shape Product”, Applied Mechanics and Materials Vol. 695 (2015) pp 260-‐264. (Indexed by Scopus)
13. S.Sulaiman, A. Roshan and S. Borazjani, “Effect of cutting parameter on tool-‐chip interface temperature in an orthogonal turning process”, Applied Mechanics and Materials Vol. 529 (2014) pp 21-‐26. (Indexed by Scopus)
14. S.Sulaiman, S. Borazjani and A. Roshan, “Finite Element Analysis of Aluminium-‐Kevlar/Epoxy Pressure Vessel”, Applied Mechanics and Materials Vol. 529 (2014) pp 27-‐32. (Indexed by Scopus)
15. M.U.Rosli, M.K.A.Ariffin, S.M.Sapuan and S.Sulaiman, “Integrated TRIZ-‐AHP Support System for Conceptual Design”, Applied Mechanics and Materials Vol. 548-‐549 (2014) pp 1998-‐2002. (Indexed by Scopus)
16. M.D. Azaman, S.M.Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Numerical simulation on moulded thin-‐walled parts via injection moulding process”, Applied Mechanics and Materials Vol. 575 (2014), pp 73-‐77. (Indexed by Scopus)
17. S.H.Tang, Shiva Sadat Moosavipur, S.Sulaiman, M.K.A.M.Ariffin and Morteza Ghobakhloo, “The impact of information technology investment on supply chain capabilities: A review”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp723-‐726. (Indexed by Scopus)
18. Hani Mizhir Magid, S. Sulaiman, M.K.A. Ariffin and B.T.H.T. Baharudin, Modeling and Simulation of Forward Al Extrusion Process Using FEM, Applied Mechanics and Materials Vol. 564 (2014) pp 525-‐532. (Indexed by Scopus)
19. Masha Nur Salsabiela Menhat, M.K.A. Ariffin, S.Sulaiman and S.H.Tang, “Managing uncertainty in supply chain management of vessel chatering in Oil and Gas Industry”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp694-‐699. (Indexed by Scopus)
20. J. Nemati, S. Sulaiman, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Development of microstructure and fracture of Al-‐6063 alloy using equal channel angular extrusion”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp488-‐494. (Indexed by Scopus)
21. Muhammad Yusuf, M.K.A.Ariffin, N. Ismail and S.Sulaiman, “Effect of machining process on surface microhardness of Titanium carbide reinforced aluminium LM6 composite”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp495-‐500. (Indexed by Scopus)
22. Tang S.H., Shiva Sadat Moosavipu, S. Sulaiman, M.K.A.M. Ariffin and Morteza Ghobakhloo, The impact of information technology investment on supply chain capabilities: A review, Applied Mechanics and Materials Vol. 564 (2014) pp 723-‐726. (Indexed by Scopus)
23. J. Nemati, S. Sulaiman, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Microharness characteristics of Al-‐6063 alloy processed by equal channel angular extrusion”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014) pp513-‐518. (Indexed by Scopus)
24. B.T.H.T.Baharudin, K.P.Ng, S.Sulaiman, R.Samin and M.S.Ismail, “Temperature distribution of micro milling process due to uncut chip thickness”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp 214-‐221. (Indexed by Scopus)
-
Page 23/65
25. Mona Kiaee, Shamsuddin Sulaiman and Tang Sai Hong, “Investigation on microstructure and Mechanical Properties of Squeeze Cast Al-‐Si Alloys by Numerical Simulation”, Advanced Materials Research Vol. 1043 (2014) pp 31-‐35. (Indexed by Scopus)
26. H. M. Magid*, S. Sulaiman, M. K. A. M. Ariffin and B. T. H. T. Baharudin, Stress analysis of forward aluminium extrusion process using finite element method, Materials Research Innovations, Vol 18, s2 (1-‐5), 2014. (IF=0.81)
27. J.Nemati, S.Sulaiman, G.H.Majzoobi and B.T.H.T. Baharudin, “Finite Element Study of Deformation Behaviour of Al-‐6063 Alloy Developed by Equal Channel Angular Extrusion”, Advanced Materials Research Vol. 1043 (2014) pp 119-‐123. (Indexed by Scopus)
28. M.K.A Ariffin, Hazami B. Che Hussain, S.B. Mohammed and S. Sulaiman, Determining Optimum Electro Discharge Machining Parameters for Drilling of a Small Hole by Utilizing Taguchi Method, Applied Mechanics and Materials Vol. 564 (2014) pp 481-‐487. (Indexed by Scopus)
29. Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman, Effect of Machining Process on Surface Microhardness of Titanium Carbide Reinforced Aluminium LM6 Composite, Applied Mechanics and Materials Vol. 564 (2014) pp 495-‐500. (Indexed by Scopus)
30. J.Nemati, S.Sulaiman, G.H.Majzoobi, B.T.H.T. Baharudin and M.A.Azmah Hanim, “Finite Element and metallurgical study of properties of deformed pure copperby ECAE at various strain rates”, Proc ImechE Part C: J Mechanical Engineering Science 2014. Vol 228(9) pp1461-‐1473. (IF=1.34)
31. M.D.Azaman, S.M.Sapuan, S.Sulaiman, E.S.Zainudin and A.Khalina, “ Numerical simulation analysis of the in-‐cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-‐walled parts formed by the injection moulding process”, (2014) Materials and Design 55, pp. 381-‐386. (IF=4.023)
32. Suraya Sulaiman, Shamsuddin Sulaiman, Munira Ali and Fazilah Abdul Aziz, “Effect of TiC particulate on the microstructure and mechanical properties of Aluminium-‐Based Metal Matrix Composite”, Applied Mechanics and Materials Vol. 529 (2014) pp 145-‐150. (Indexed by Scopus)
33. Masha Nur Salsabiela Menhat, M.K.A. Ariffin, S. Sulaiman and Tang S.H., Managing Uncertainty in Supply Chain Management of Vessel Chartering in Oil & Gas Industry, Applied Mechanics and Materials Vol. 564 (2014) pp 694-‐699. (Indexed by Scopus)
34. Subramaniasarma Sreenivasan, Sameer Adnan Ibraheem, Shamsuddin Sulaiman, B. T. Hang Tuah Baharudin, Mohd K. A. Ariffin and K. Abdan, Evaluation of Combined Treatments Of Natural Fibers: Kenaf, Abaca And Oil Palm Fibers Using Micromechanical and SEM Methods, Advanced Materials Research Vols. 912-‐914 (2014) pp 1932-‐1939. (Indexed by Scopus)
35. S. Sulaiman, M. K. A. Ariffin and A. Roshan1, Finite Element Modeling of the Effect of Tool Rake Angle on Cutting Force and Tool Temperature during High Speed Machining of AISI 1045 Steel, Advanced Materials Research Vol. 939 (2014) pp 194-‐200. (Indexed by Scopus)
36. Suraya Sulaiman, Shamsuddin Sulaiman, Nur Najmiah Jaafar and Nor Imrah Yusoff, “ Studies on tensile properties of Titanium Carbide (TiC) particulate composite”, Applied Mechanics and Materials Vol. 529 (2014) pp 151-‐156
37. S.Sulaiman, A. Roshan and S. Borazjani, “Effect of cutting parameter on tool-‐chip interface temperature in an orthogonal turning process”, Advanced Meterials Research, Vol. 903 (2014) pp 21-‐26. (Indexed by Scopus)
-
Page 24/65
38. H.M.Magid, S.Sulaiman, M.K.A.M.Ariffin and B.T.H.T. Baharudin, “Stress analysis of forward aluminium extrusion process using finite element method”, Material Research Innovations, 2014.Vol. 18, Suppl 2, S2-‐1 to S2-‐6. (IF=0.83)
39. M Yusuf, M.K.A. Ariffin, N Ismail, S Sulaiman, “Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy and Particulate Reinforced Metal Matrix Composite”, Materials Science Forum 773, pp. 894-‐901, 2014. (Indexed by ISI) .
40. M Yusuf, MKA Ariffin, N Ismail, S Sulaiman, “Experimental Investigation on Surface Roughness and Tool Wear in Dry Machining of TiC Reinforced Aluminium LM6 Composite”, Materials Science Forum 773, 339-‐347, 2014. (indexed by ISI).
41. M Sayuti, S Sulaiman, B Baharudin, MKA Ariffin, “The Influence of Mechanical Mold Vibration on Temperature Distribution and Physical Properties of Al-‐11.8% Si Matrix Composites”, Materials Science Forum 773, 195-‐202, 2014. (Indexed by ISI)
42. A Abdullah, S Sulaiman, B Baharudin, MKA Ariffin, N Haliza, “Mechanical Properties of Tin Tailing Sand-‐Clay Mixture from Batu Gajah, Perak, Malaysia for Making Greensand Casting Mould”, Materials Science Forum 773, 211-‐217, 2014. (Indexed by ISI)
43. S.Sulaiman, A. Roshan and S. Borazjani, “Finite Element of Aluminiu-‐Kevlar/Epoxy Pressure Vessel”, Advanced Meterials Research, Vol. 903 (2014) pp 27-‐32. (Indexed by Scopus)
44. Suraya Sulaiman, Shamsuddin Sulaiman, Miunira Ali and Fazilah Abdul Aziz, “Effect of TiC particulate on the microstructure and mechanical properties of Aluminium-‐Based Metal Matrix Composite”, Advanced Materials Research Vol. 903 (2014) pp 145-‐150. (Indexed by Scopus)
45. Suraya Sulaiman, Shamsuddin Sulaiman, Nur Najmiah Jaafar and Nor Imrah Yusoff, “ Studies on tensile properties of Titanium Carbide (TiC) particulate composite”, Advanced Materials Research Vol. 903 (2014) pp 151-‐156. (Indexed by Scopus)
46. M.Syahrir Ahmad, B.T.H.T Baharudin, Z.Leman, N.Ismail and S.Sulaiman, “Thermal parameter affects on the part built using 3D printer Projet SD 3000”, Materials Science Forum Vols. 773-‐774 (2014) pp 841-‐849. (Indexed by ISI)
47. S.Sulaiman, J. Nemati, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Experimental Study of impact strength of Al-‐6063 alloy Processed by equal channel angular extrusion”, Advanced Materials Research Vol. 911 (2014) pp 158-‐162. (Indexed by Scopus)
48. T.R. Sahroni and S.Sulaiman, “Casting quality model for casted aluminium silicon carbide based on non-‐linear thermal expansion”, Int. J. Materials and Product Technology, Vol. 48, Nos. 1/2/3/4, 2014, pp217-‐233. (IF=0.365)
49. Amer N.N.Kakahy, D.Ahmad, Md. Akhir, S.Sulaiman and Ishak A, “Effects of knife shapes and cutting speeds of a mover on the power consumption for pulverizing sweet potato vine”, Key Engineering Materials Vols. 594-‐595 (2014) pp1126-‐1130. (Indexed by Scopus)
50. B.T.H.T. Baharudin, K.P.Ng, S.Sulaiman, R. Samin and M.S.Ismail, “ Temperature distribution of micro milling process due to uncut chop thickness”, Advanced Meterials Research, Vol. 939 (2014) pp 214-‐221. (Indexed by Scopus)
51. M.Syahrir Ahmad, B.T.H.T Baharudin, Z.Leman, N.Ismail and S.Sulaiman, “Thermal parameter affects on the part built using 3D printer Projet SD 3000”, Materials Science Forum Vols. 773-‐774 (2014) pp 833-‐841. (Indexed by ISI)
-
Page 25/65
52. Uzair Rosli, M.K.A.Ariffin, S.M.Sapuan and S.Sulaiman, “Problems evaluation for TRIZ methods using AHP: Case study on car’s dashboard improvement design concepts”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp89-‐93. (Indexed by Scopus)
53. C.N.A.Jaafar, I.Zainol, S.Sulaiman and M.I.Ayub, “ Effects of PVA-‐PEG binder system on microstructure and properties of sintered Alumina”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp355-‐360. (Indexed by Scopus)
54. Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effects of feeding angles and cutting speeds of a mower blade with serrated edges on the pulverization of sweet potato vines”, Advanced Materials Research Vol. 626 (2013), pp260-‐264. (Indexed by ISI)
55. S. Sulaiman, S. Emamian, M. N. Sheikholeslam, and M. Mehrpouya, "Review of the Effects of Friction Stir Welding Speed on Stainless Steel Type 304L," International Journal of Materials, Mechanics and Manufacturing vol. 1, no. 1, pp. 85-‐87, 2013. (Indexed by Scopus)
56. M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S.Zainudin, K.Abdan and M.R.Mansor, “An investigation of the processability of natural fibre reinforced polymer composites on shallow and flat-‐thin walled parts by Injection moulding process”, Materials and Design 50 (2013) 451-‐456. (IF=4.023)
57. S.Sreenivasan. S.Sulaiman, B.T.H.T. Baharudin, M.K.A. Ariffin and K. Abdan, “Recent developments of kenaf fibre reinforced thermoset composites: review”, Int. Journal of Maerials Research Innovations, Vol.17, Suppl 2, (2013), pp s2-‐1 –s2-‐11. (IF=0.83)
58. Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Pulverization of sweet potato vine at different mover speeds”, IOP Conf. Series: Materials Science and Engineering 50 (2013) 012022. (Indexed by Scopus)
59. Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effects of cutting speeds and moisture content on grass chopping (pulverizing)”, Advanced Science letters, Vol 19, No. 9, Sept 2013, pp. 2533-‐2535. (Indexed by ISI)
60. S.Sulaiman, A.Roshan and S.Borazjani, “Finite element modeling and simulation of machining of Titanium alloy and H13 Tool Steel using PCBN Tool”, Applied Mechanics and Materials, Vols. 392 (2013) pp 36-‐40. (Indexed by Scopus)
61. S.Sulaiman, A.Roshan and S.Borazjani, “Effect of cutting parameters on cutting temperature of TiAl6V4 Alloy”, Applied Mechanics and Materials, Vols. 392 (2013) pp 68-‐72. (Indexed by Scopus)
62. S.Sulaiman, S.Borazjani, A.Roshan and S. Heydaryan, “Failure analysis of aluminium reinforced composite vessel”, Applied Mechanics and Materials, Vols. 392 (2013) pp 178-‐182. (Indexed by Scopus)
63. Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effect of feeding angles and cutting speeds of a mover knife with serrated edges on the pulverization of sweet potato vines”, Advanced Materials Research Vol. 626 (2013) pp 260-‐264. (Indexed by Scopus)
64. Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effect of knife shapes and cutting speeds of a mover on the percentage pulverization of sweet potato vine”, Applied Mechanics and Materials, Vols. 421 (2013) pp29-‐33. (Indexed by Scopus)
65. R.S.Taufik and S.Sulaiman, “Thermal expansion model for cast aluminium Silicone carbide”, Procedia Engineering 68 (2013) pp. 392-‐398. (IF=0.73)
66. Jamshid Nemati, S.Sulaiman, Gholam Hossein Majzoobi, B.T.H.T.Baharudin and Azma Hanim
-
Page 26/65
Mohamed Ariff, “Effect of equal channel angular extrusion on fatique life of pure Copper”, Advanced Materials Research Vol. 685 (2013) pp 97-‐101. (Indexed by Scopus)
67. S.Sulaiman, S.Borazjani and S.H.Tang, “Finite element analysis of filament-‐wound composite pressure vessel under internal pressure”, IOP Conf. Series: Materials Science and Engineering 50 (2013) 012061. (Indexed by Scopus)
68. S.Sulaiman and N.A. Ismail, “Analysis of failure in manufacturing machinery”, IOP Conf. Series: Materials Science and Engineering 50 (1) (2013) 012057.
69. D.Ahmad, O.Jamarei, S.Sulaiman, A.B. Fashina and F.B.Akande, “Modelling of motion resistance ratios of pneumatic and rigid bicycle wheel”, Pertanika Journal of Science & Technology, Vol.21(1) Jan 2013, pp. 59-‐74. (Indexed by Scopus)
70. A.Abdullah, S.Sulaiman, B.T.H.T.Baharudin, M.K.A.Ariffin and T.R.Vijayaram, “Green compression strength of tin mine tailing sand for green sand casting mold”, (2013) Pertanika Journal of Science and Technology 21 (2) pp.335-‐342. (Indexed by Scopus)
71. T.S. Hong, R. Samin, S. Sulaiman and Weria Khaksar, ‘Development of an Educational Robotic Training Kit”, Int. Journal of Advanced Science Letters (2013) 19 (11) pp. 3304-‐3306. (IF=0.42)
72. Shamsuddin Sulaiman, SH Tang, M.K.A.M Ariffin, A Saleh, “Influence of Pattern Coating Thickness on Porosity and Mechanical Properties of Lost Foam Casting of Al-‐Si (LM6) Alloy”, Applied Mechanics and Materials, Vol 300, pp. 1281-‐1284, 2013. (Indexed by Scopus)
73. S Sulaiman, M.K.A.M Ariffin, TS Hong, NA Mustafa, Effect of Boric Acid Mixture as Solid Lubricant towards Machining Processes, Advanced Materials Research, Vol 651, 372-‐377, 2013(Indexed by Scopus).
74. Nanang Fatchurrohman, Shamsuddin Sulaiman, SM Sapuan, M.K.A Ariffin, BTHT Baharuddin, “Generic Framework for Conceptual Design Using Concurrent Engineering Strategy. A Case Study: Advanced Material Application Product Development of Metal Matrix Composite Component”, Advanced Materials Research, Vol 626, 99-‐108, 2013 . (Indexed by Scopus)
75. N Fatchurrohman, S Sulaiman, SM Sapuan, MKA Ariffin, B Baharuddin, “New Technique for Conceptual Selection of Manufacturing Process and Material, Case Study: Metal Matrix Composite Component”, Advanced Materials Research, Vol 626, 82-‐86, 2013 (Indexed by Scopus)
76. M. U. Rosli, M. K. A. Ariffin, S. M. Sapuan, and S. Sulaiman, “Integrated AHP-‐TRIZ Innovation Method for Automotive Door Panel Design”, International Journal of Engineering and Technology (IJET), Vol 5 No 3, 3158-‐3167, 2013. (Indexed by Scopus)
77. M. U. Rosli, M. K. A. Ariffin, S. M. Sapuan, and S. Sulaiman, "Integrating TRIZ and AHP: A MPV_s Utility Compartment Improvement Design Concepts," International Journal of Materials, Mechanics and Manufacturing, vol. 1, no. 1, pp. 32-‐35, 2013. (Indexed by Scopus)
78. S. Sulaiman, , Umar Ali Umar, S.H. Tang, N. Fatchurrohman, Application of Radio Frequency Identification (RFID) in Manufacturing in Malaysia, Procedia Engineering, Vol. 50(2012), pp. 697-‐706. (IF=0.73)
79. Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A, “Pulverizing sweet potato vines with different knife angles and different cutting speed”, International Journal of emerging technology and advanced Engineering (2012). (Indexed by Scopus)
80. N. Fatchurrohman, S.Sulaiman, M.K.A. Ariffin, B.T.H.T.Baharuddin, and A.A.Faieza, “ Solidification characteristic of titanium carbide particulate reinforced aluminium alloy matrix
-
Page 27/65
composites”, Journal of Engineering Science and Technology 7(2) 2012, pp248-‐256. (Indexed by Scopus)
81. Seyedehfarzaneh Nojabaei, Z. Leman, S.H. Tang and S.Sulaiman, “Development of Priority Oriented Scheduling Method to Increase the Reliability of Manufacturing System”, American Journal of Applied Science 9 (9), 2012, pp1435-‐1442.
82. Shahla Seifi, Norzima Zulkifli, Rosnah Yusuff and Shamsuddin Sulaiman, “Information requirements for sustainable consumption”, Social responsibility Journal, Emerald, Vol. 8 Iss:3 (2012). pp.433-‐411. (Indexed by Scopus)
83. Taufik Roni Sahroni, Shamsuddin Sulaiman, B. T Hang Tuah Baharudin1, Mohd Khairol Anuar Mohd Ariffin, Hambali Arep@Ariff, “Design and Simulation on Investment Casting Mold for Metal Matrix Composite Material”, Advances in Mechanical Engineering, Volume 2, Number 4, pp 33-‐39, 2012. (IF=0.64)
84. Sayuti, M., Sulaiman, S., Baharudin, B. T. H., M.K.H, Ariffin., Suraya, S., and Vijayaram, T. R, “Effect of Mould Vibration on Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite”, Advanced Material Research, 445, 475-‐480, 2012. (Indexed by Scopus)
85. Sayuti M., S. Sulaiman, B.T.H.T, Baharudin, M.K.A, Arifin, Vijayaram.T.R, and Suraya S, “Influence of Mechanical Vibration Moulding Process on the Tensile Properties of TiC Reinforced LM6 Alloy Composite Castings”, Advances in Mechanical Engineering, Volume 2, Number 4, pp 13-‐17, 2012 . (IF=0.64)
86. N. Fatchurrohman, S.Sulaiman, M.K.A. Ariffin, B.T.H.T.Baharuddin, and A.A.Faieza, “Solidification characteristic of titanium carbide particulate reinforced aluminium alloy matrix composites”, Journal of Engineering Science and Technology, 7, 2, 248-‐256, 2012. (Indexed by Scopus)
87. N. Fatchurrohman, S. Sulaiman, S.M. Sapuan, M.K.A. Ariffin and B.T.H.T. Baharuddin, “A new concurrent engineering -‐ multi criteria decision making technique for conceptual design selection”, Applied Mechanics and Materials, 225, 293-‐298, 2012. (Indexed by Scopus)
88. Muhammad Yusuf, M.K.A. Ariffin, N.Ismail, S. Sulaiman, “Chip formation and surface roughness in dry machining of Aluminium Alloys”, Advanced Science Letters, Volume 19, Number 8, pp. 2343-‐2346(4). (IF=0.42)
89. Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman, “Optimization of Cutting Parameters on Turning Process Based on Surface Roughness using Response Surface Methodology”, Applied Mechanics and Materials Vols. 117-‐119, pp 1561-‐1565, 2012. (Indexed by Scopus)
90. Mostafa Badakhshian, Shamsuddin B. Sulaiman and Mohd Khairol Anuar B. Mohd Ariffin, “Performance optimization of simultaneous machine and automated guided vehicle scheduling using fuzzy logic controller based genetic algorithm”, International Journal of Physical Sciences Vol. 7(9), pp. 1461 -‐ 1471, 2012 ( IF= 0.52)
91. Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A, “Pulverizing sweet potato vines with different knife angles and different cutting speed”, International Journal of emerging technology and advanced Engineering (2012)
92. Ali Hashemi, Desa Ahmad, Jamarei Othman and Shamsuddin Sulaiman, “ Development and testing of a new tillage apparatus”, Journal of Agricultural Science;, Vol. 4. No. 7; (2012), pp. 103-‐106. (Indexed by Scopus)
-
Page 28/65
93. M. Nikbakht, N.Zulkifli, N.Ismail, S.Sulaiman, A.Sadrnia and M.Suleiman, “Multi-‐echelon supply chain design in natural gas Industry”, World Applied Science Journal, 20(1), 2012, pp. 54-‐63. (Indexed by Scopus)
94. S.Sulaiman, M.K.A.M.Ariffin and S.Y.Lai, “Springback behaviour in sheet metal forming for automotive door”, AASRI Procedia 3 (2012) pp.224-‐229. (Indexed by ISI)
95. S.H.Tang, N.Hakim, W.Khaksar, S.Sulaiman, M.K.A.Ariffin and R.Samin, “Artificial Neural Network (ANN) approach for predicting friction coefficient of roller Burnishing AL6061”, Int. Journal of Machine Learning and Computing, Vol. 2, No. 6, December 2012, pp. 825-‐830. (Indexed by Scopus)
96. T.R.Vijayaram, A.Abdullah and S.Sulaiman, “Determination of green compression strength and permeability of tailing sand for metal casting Industries gathered from ex tin mines in Perak State Malaysia”, Indian Foundry Journal, Vol 58, No.10, October 2012, pp.29-‐33.
97. M.K.A Ariffin, S.Sulaiman, Tang S.H., M.roshdi, S.B. Mohammed, “The effects of different grades of hob cutter in determining gear tooth accuracy”, Advanced Science Letters, 13, 519-‐524, 2012 ( IF= 1.253).
98. M. Sayuti, S. Sulaiman, T. R. Vijayaram, B. T. H. T. Baharudin, and M. K. A. Arifin, “Manufacturing of TiC Particulate Reinforced Al-‐11.8 Si Matrix Composites by Mechanical Vibration Mould”, Adv. Sci. Lett. 15, 12-‐15, 2012 (IF=1.253)
99. A. Abdullah, S. Sulaiman, B.T.H.T. Baharudin, M.K.A. Ariffin, T.R.Vijayaram, “Effect of Moisture Content on the Permeability of Tailing Sand Samples Gathered from Ex Tin Mines in Perak State Malaysia”, Advances in Mechanical Engineering, Volume 2, Number 4,pp 18-‐23, 2012. (Indexed by Scopus)
100. A Abdullah, Shamsuddin Sulaiman, BT Baharudin, MKA Ariffin, TR Vijayaram, Mohd Sayuti, “Testing for Green Compression Strength and Permeability Properties on the Tailing Sand Samples Gathered from Ex Tin Mines in Perak State, Malaysia”, Advanced Materials Research, Vol 445, pp. 859-‐864, 2012. (Indexed by Scopus)
101. Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A., “Effects of Cutting Speeds and Moisture Content on Grass Chopping (Pulverizing)”, Advanced Science Letters, (2012). (IF=1.25)
102. S.Suraya, S.Sulaiman, M.K.A M Arrifin and M.Sayuti, “Computer simulation and experimental investigation of solidification casting process”, key engineering materials, volume 417-‐472, pp 601-‐605, 2011. (Indexed by Scopus)
103. S.Sulaiman, tang S Hong, S. Pawanchi, G.R. Esmaeilian, M.K.A Mohd Ariffin, B.T. Hang Tuah Baharuddin, “Improvement of Tops Spinning Manufacturing with CNC lathe”, Procedia Engineering, Vol 15, pp 3886-‐3890. 2011 . (IF=0.73)
104. S.Sulaiman, M.K.A Mohd Ariffin, G.R. Esmaeilian, , K. Faghihi, B.T. Hang Tuah Baharuddin, “Customer Knowledge Management Application in Malaysian Mobile Service Providers”, Procedia Engineering. Vol 15 (2011) pp 3891-‐3895. 2011 . (IF=0.73)
105. D